Building SSR 2010 11

GOVERNMENT OF ANDHRA PRADESH
BUILDING - SoR: 2010-2011
COMMITTEE OF CHIEF ENGINEERS
1
SCHEDULE OF RATES
FOR
BUILDING WORKS
FOR THE YEAR 2010-2011

(Effective from 1st June, 2010)
ALL ENGINEERING
DEPARTMENTS
2
Office of the Chief Engineer (R&B)
Buildings, R&B Department
Errum manzil, Hyderabad
Procs.No. CEB/TA8/AEE3/SOR:2010-11 Dt:19-07-2010.
Sub:- Printing of Building-SORs for all Engineering Departments specific to the functioning of
Building works – Building-S0R:2010-11 – Communication of Building-SORs – Reg.,
Ref:- 1. G.O.Rt.No.471, T,R&B (R.1) Dept., dt:20-04-2007.

2. Minutes of Committee of Chief Engineers meeting for Building-SORs held on Dt: 19-07-
2010.
* * * * *
The Government of Andhra Pradesh have constituted a Committee of Chief Engineers of
Engineering departments dealing with Building works for finalizing and communicating Building-SOR (Civil &
st
Electrical) vide G.O. 1 cited. In accordance therewith the Committee of Chief Engineers has finalized and
approved the Building-SOR: 2010-11 in the Minutes of Meeting held on 19-07-2010.
The rates for the Building items (Civil, Water Supply & Sanitary and Electrical items) are to be
followed henceforth by all the concerned departments for building works. The rates of Labour Rates,
Common Material & Work items, Public Health items, Conveyance Rates of Materials & Hire charges of
Common SOR-2010-11 remain unchanged. No other items other than the items communicated in this
Building-SOR shall be introduced.
The Heads of Departments mentioned below are authorized to print the Building-SOR: 2010-11. The
unauthorized printing & selling of the Building-SOR is strictly prohibited.
The revised rates will come into force with immediate effect.
The receipt of the proceedings may please be acknowledged.
Enclosed: Building SoR: 2010-11-CD as above

Sd/-
T.Baburaj
Chief Engineer (R&B) Buildings
Convener-Member,
Committee of Chief Engineers- Building-SOR
To
1. Engineer-in-Chief (Admn.&NH)., Roads & Buildings Department, Errummanzil, Hyderabad.
2. Engineer-in-Chief (IW)I&CAD, Irrigation Department, Errummanzil, Hyderabad.
3. Engineer-in-Chief, P.H.&M.E. Department. A.C. Guards, Hyderabad.
4. Engineer-in-Chief (P.R.), Panchayat Raj Department, Errummanzil, Hyderabad.
5. Engineer-in-Chief (R&B) (Roads), R&B Department, Errummanzil, Hyderabad.
6. Engineer-in-Chief (R&B) (HUDCO), R&B Department, Errummanzil, Hyderabad.
7. Engineer-in-Chief, Tribal Welfare & Social Welfare Department, DSS Bhavan, Masab tank, Hyderabad.
8. Engineer-in-Chief, Greater Hyderabad (MCH), CC Complex, Tankbund Road, Hyderabad.
9. Chief Engineer (R&B) (NABARD), R&B Department, Errummanzil, Hyderabad.
10. Chief Engineer (QC & Member,COT), R&B Department, Errummanzil, Hyderabad.
11. Chief Engineer (R&B) (Designs), R&B Department, Errummanzil, Hyderabad.
12. Chief Engineer(AP Housing Board), Gruhakalpa, nampally, Hyderabad.
13. Chief Engineer(Housing), Urdugally, Himayatnagar, Hyderabad.
14. Chief Engineer(APSRTC), RTC ‘X’ Roads, Musheerabad, Hyderabad.
15. Chief Engineer(APHMHIDC), IIIrd Floor, DM&HS Campus, Sultanbazar, Koti, Hyderabad.
16. Chief Engineer (AP Police Housing & Welfare Corporation), Lakdi-ka-pool, Hyderabad.
17. Superintending Engineer (R&B), Head Quarters Circle, Khairatabad, Hyderabad
18. Superintending Engineer (R&B), Electrical Circle, Errummanzil, Hyderabad.
3
INDEX FOR BUILDING SOR: 2010-11
Sl.
DESCRIPTION Page No:
No:
From To
BUILDING – SOR:2010-11
1 Index for Building Civil Items 5 5
2 Preamble of Building-SOR-2010-11 6 8
3 Building Civil Items - Building-SOR-2010-11 9 80
4 Water Supply & Sanitary Items - Building-SOR-2010-11 81 123
5 Electrical Items – Building-SOR-2010-11 124 214
6 Common SOR:2010-11 – Preamble 215 223
7 Labour Rates 224 227
8 Basic Input Data for work items 228 247
9 Public Health Items 252 319
10 Conveyance Charges of Materials 320 323
11 Hire Charges of Plant & Machinery 324 326
12 Seigniorage Charges 327 330
4
BUILDING SOR:2010-11
INDEX FOR BUILIDNG CIVIL ITEMS
Pages
SECTION SECTION CODE DESCRIPTION
Sl from to
1 PREAMBLE 6 9
2 SECTION - A BMT - A 01 to 20 BRICKS & BUILDING BLOCKS 10 11
3 SECTION - B BMT - B 01 to 16 NATURAL FLOORING STONES 11 12
4 SECTION - C BMT - C 01 to 52 WALL & FLOOR TILES 12 15
5 SECTION - D BMT - D 01 to 18 PAVING & INTERLOCKING TILES 15 16
6 SECTION - E BMT - E 01 to 20 TIMBER & ROOFING MATERIALS 16 17
7 SECTION - F BMT - F 01 to 30 MILD, GALVANISED & STAINLESS STEEL 17 18
8 SECTION - G BMT - G 01 to 79 FIXTURES FOR DOORS & WINDOWS 18 20
9 SECTION - H BMT - H 01 to 95 WATER PROOFING CHEMICALS & ADMIXTURES 20 23
10 SECTION - I BMT - I 01 to 21 GLASS 23 23
11 SECTION - J BMT - J 01 to 51 PAINTS & POLISHES 23 26
12 SECTION - K BMT - K 1 to 121 PARTICLE BOARDS 26 29
13 SECTION - L BMT - L 01 to 20 PLYWOOD 29 29
14 SECTION - M BMT - M 01 to 98 CEILINGS, WALL PARTITIONS & WALL LININGS 29 37
15 SECTION - N BMT - N 01 to 71 DOORS 37 51
16 SECTION - P BMT - P 01 to 77 WINDOWS 51 63
17 SECTION - Q BMT - Q 01 to 15 STRUCTURAL GLAZING 63 67
18 SECTION - R BMT - R 01 to 15 DISMANTLING 67 67
19 SECTION - S BMT - S 01 to 05 READY MIX CONCRETE 67 67
20 SECTION - U BMT - U 01 to 11 EXPANSION JOINT FILLERS 68 68
21 SECTION - V BMM - V 01 to 24 LABOUR CHARGES 68 69
22 SECTION - W BMS - W 01 to 68 MISCELLANEOUS ITEMS 69 74
23 SECTION - X BMC - X 01 to 12 MACHINERY CHARGES, HIRE CHARGES FOR CENTRING 74 74

24 CENTRING & SCAFFOLDING CHARGES 75 80
5
PREAMBLE
6
Preamble (Building Items-Building SoR-2010-11)
A. With the advent of the revision and updation of standard data in all the Engineering /Public
Works departments and other organizations vide G.O. Ms. No: 49 Irrigation & CAD(PW-
Reforms) Department Dt: 02.03.2009, it has become imperative to update the ‘Schedule of
Rates’ in a scientific and systematic manner. Apparently finalization of the ‘Schedule of
Rates’ for the ‘Building items’ is an exhaustive task and needs substantial contribution from
all the engineering departments/ organizations. All the engineering departments/
organizations specifically those who are dealing with the building works should articulate
and furnish necessary updates. Similarly, any corrections or deletions may be brought to the
notice of the Committee for issuing necessary amendments from time to time.
B. Most of the rates for building works are being finalized based on the quotations obtained
from specific manufacturers/ suppliers. The rates finalized in this procedure either directly
or indirectly endorse the products of the manufacturers/ firms/ suppliers from whom the
quotations are obtained. The items that are highlighted by this particular process are-
Vitrified Tiles, Paints, Bath & Toilet fittings etc. This leads to monopolization of the particular
product and encourages lobbying from the manufacturers/ suppliers. The Committee of
Chief Engineers for ‘SOR’ is often subjected to criticism at various forums for adopting this
procedure in finalizing the rates for ‘Schedule of Rates’. In order to circumvent this, it is
decided to publish the rates in the ‘Schedule of Rates’ by mentioning the technical
specification and without mentioning the names of the products/ manufacturing firms
wherever it is feasible. But where large difference is found in the rates of a particular item or
in group of items, list of the products/ manufacturing firms is appended at the end of the
‘specification’ for facilitating the estimate sanctioning authorities to adopt suitable rates.
C. It is observed that adoption of the provision of ‘Over Heads and Contractor’s Profit’ in the
estimates has become a point of contention as some of the data items in ‘AP Revised
Standard Data’ do contain this provision and for some of the data items this provision is
missing. In view of the ambiguity it is clarified that the provision of ‘Over Heads and
Contractor’s Profit @ 14%’ as approved by the BoCE’s in Common SoR-2010-11 for all the
data items of the estimates may be allowed for the original nature of works subjected to the
fulfillment of the conditions given below:
 Site accommodation, setting up plant, access road, water supply, electricity and
general site arrangements.
 Office furniture, equipment and communications.
 Expenditure on:
7
Preamble (Building Items-Building SoR-2010-11)
o Corporate office of contractor.

o Technical agents for site supervision.
o Documentation and “as built” drawings.
o Mobilisation/ de-mobilisation of resources.
o Labour camps with minimum amenities and transportation to work sites.
o Light vehicles for site supervision including administrative and
managerial requirements.
o Laboratory equipment and quality control including field and laboratory
testing.
o Minor T & P and survey instruments and setting outworks, including
verification of line, dimensions, etc.
o Watch and ward.
o Traffic management/ Safety management during construction.
o Expenditure on safeguarding environment.
 Sundries
 Financing Expenditure
 Sales/ Turn overtax (Material VAT)
 Work Insurance/ compensation
D. The estimate preparing authorities shall allow relevant Municipal Area Allowance or any
such allowance on the labour components of civil, water supply & sanitary items, electrical
wherever applicable as per the guidelines.
E. The rates adopted in the ‘Schedule of Rates’ are exclusive of VAT, which is to be provided in
the estimates towards Value Added Tax (Works Contract Tax) at 4% on the finished work
items as defined in APVAT Act-2005 as per the recommendation of BoCE’s. It is clarified that
the VAT considered in the ‘rates of the materials in the SoR’ and ‘Overheads and
Contractor’s Profit’ is a material VAT and is an input tax.
8
BUILDING ITEMS
Building Items (Building SoR-2010-11)
SS RATE
Sl.
Item Code Description of item Unit FOR
No
20010-11
1 2 3 4 5
A BRICKS & BUILDING BLOCKS
1 BMT-A.01 Bricks second class or ground moulded (Non-Modular or 1000 3100.00
traditional size) 23 x 11 x 7 cm (ex-quarry price - excluding cost Nos
of conveyance, loading & unloading)
2 BMT-A.02 - do- modular size 19 x 9 x 9 cm (ex-quarry price - excluding cost 1000 4185.00
of conveyance, loading & unloading) Nos
3 BMT-A.03 Fly ash cement/lime solid blocks with compressive strength of 75 Each 15.00
kg/sq.cm - IS:12894-1990 - CLASS - 7.5 (ex-quarry price -
excluding cost of conveyance, loading & unloading) 290 x 225 x
140 mm
140 mm
140 mm
excluding cost of conveyance, loading & unloading) 290 x
112/100 x 140 mm
60 mm
140 mm
140 mm
10 BMT-A.10 Fly ash cement/ lime solid blocks with compressive strength of Each 13.00
50 kg/sq.cm - IS:12894-1990 - CLASS - 5 (ex-quarry price -
140 mm
140 mm
140 mm
excluding cost of conveyance, loading & unloading) 290 x
112/100 x 140 mm
10
SS RATE
Sl.
No
20010-11
60 mm
140 mm
140 mm
17 BMT-A.17 Cinder 1 Cum 495.00
18 BMT-A.18 Supply of Aerated (Cellular) Autoclaved Concrete Blocks Each 65.00
conforming to IS:2185 (Part-3) - 1984 and IS:6441-1972 of
Compressive strength 3 N/mm2 of Aerocon / Airolite or
equivalent products (landing cost - including cost of conveyance,
loading & unloading) 600 x 200 x 100 mm
B NATURAL FLOORING STONES (ex-quarry price - excluding cost
of conveyance, loading & unloading)
21 BMT-B.01 Kadapa slab 40 mm thick and size not less than 0.457 Mx0.457 M 1 Sqm 75.00
22 BMT-B.02 Kadapa slab 50 mm thick and size not less than 0.457 Mx0.457 M 1 Sqm 86.00
23 BMT-B.03 Shahabad /Tandur Rough Stone slabs of minimum of 25 mm 10 Sqm 750.00
thick
24 BMT-B.04 Shahabad / Tandur Rough Stone slabs of minimum 40 mm thick 10 Sqm 968.00
25 BMT-B.05 Polished Shahabad/ Tandur stone slabs of 15 to 18 mm thick 10 Sqm 1291.00
(0.457x0.304) or any other size as specified
26 BMT-B.06 Polished black Kadapa slabs minimum of 15 mm thick 10 Sqm 1076.00
(0.457x0.457M)
27 BMT-B.07 Polished Bethamcherla pure (marble type) white stone minimum 10 Sqm 3012.80
25 mm thick (0.254Mx0.254M)
28 BMT-B.08 Polished Bethamcherla coloured stone minimum 25 mm thick 10 Sqm 2152.00
(0.254M x0.254M)
29 BMT-B.09 High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) 1Sqm 2300.00
other than black/ premium colours
other than black and regular colours
black
32 BMT-B.12 Polished Marble slabs of any variety (Such as Dongari/ Adanga/ 1 sqm 570.00
Marodh/ Rajganpur etc) 16 mm to 20 mm (average) thick (size
0.457 M x 0.457 M) / (0.6M x 0.6M)
11
SS RATE
Sl.
No
20010-11
33 BMT-B.13 Polished Marble slabs of any variety (Such as Dongari/ Adanga/ 1 sqm 460.00
Marodh/ Rajganpur etc) polished 16 mm to 20 mm (average)
thick 0.305 M x 0.305 M
34 BMT-B.14 Polished Marble slabs of any variety and gang saw cut (Such as 1 sqm 780.00
Dongari/ Adanga/ Marodh/ Rajganpur etc) 16 mm to 20 mm
(average) thick ( 0.610 M width of any length)
35 BMT-B.15 Polished Marble Tiles 8 mm thick of all sizes and varieties 1 sqm 371.00
36 BMT-B.16 Granite stone tiles 8 mm thick (mirror polished of all shades) 1 sqm 780.00
C WALL & FLOOR TILES (landing cost - including cost of
conveyance, loading & unloading)
37 BMT-C.01 Ceramic tiles 7.3mm thick 1st quality of all shades (as per 1 sqm 374.00
manufacture specification)
38 BMT-C.02 Edge Cut - Rectified Ceramic tiles 8 mm thick 1st quality of all 1 sqm 450.00
shades
39 BMT-C.03 Decorated white background glazed tiles 200 mm x 152 mm 1 sqm 459.00
40 BMT-C.04 Decorated coloured background glazed tiles 200mm x 300 mm 1 sqm 512.00
41 BMT-C.05 Fantasy Glazed Tiles size 200mm x152 mm 1 sqm 485.00
42 BMT-C.06 White glazed Tiles of any size Ist quality 1 sqm 280.00
43 BMT-C.07 Glazed coloured Tiles of any size Ist Quality 1 sqm 332.00
44 BMT-C.08 Precast Terrazzo Tiles 20 mm thick ( Medium shade) 1 sqm 238.00
45 BMT-C.09 Precast Terrazzo Tiles 20 mm thick (dark shade) 1 Sqm 231.00
46 BMT-C.10 Supply & Fixing precast Terrazzo Tiles Marbleite in white & 1 Sqm 250.00
colour vains 20 mm thick
47 BMT-C.11 Supply & Fixing precast Terrazzo Tiles Marbleite in white tiles 20 1 Sqm 194.00
mm thick
48 BMT-C.12 Supply & fixing Terrazzo tiles 20 mm thick grey tiles 1 Sqm 112.00
49 BMT-C.13 Vitrified polished floor tiles of size not less than 900 x 900 x 10 1 Sqm 1024.00
mm thickness
50 BMT-C.14 Vitrified polished floor tiles of size not less than 795 x 795 mm x 1 Sqm 903.00
8 mm thickness
8 mm thickness glossy finish premium colours
8 mm thickness regular finish and normal colours
53 BMT-C.17 Vitrified polished floor tiles of size not less than 400 x 400 x7mm 1 Sqm 542.00
thickness normal colours
54 BMT-C.18 Glass Mosaic Tiles Group 1 series or equivalent quality 20x20x4 1 Sqm 1144.00
mm thick
55 BMT-C.19 Providing of Vitrified/ Ceramic Tile flooring for required areas 1 Sqm 124.00
using different sizes, approved colour and make fixing with
LATICRETE ADHESIVE as Specified thickness with out joint
including all taxes excluding cost of tiles 600 x 600 mm and
above sizes tiles.
56 BMT-C.20 Providing of Vitrified/ Ceramic Tile flooring for required areas 1 Sqm 99.50
using different sizes, approved colour and make fixing with
LATICRETE ADHESIVE as Specified thickness with out joint
including all taxes excluding cost of tiles 400 x 400 mm and
below size tiles
57 BMT-C.21 Providing tile flooring with LATICRETE ADHESIVE of specified 1 Sqm 141.00
thick and pointing specified colour cement based polymer grout
of LATICRETE mixed with Laticrete 1776 grout admix plus or
equivalent including all taxes excluding cost of tiles: 600 x 600
12
SS RATE
Sl.
No
20010-11
mm tiles with 3 mm joints width
equivalent including all taxes excluding cost of tiles:600 x 600
65 BMT-C.29 Providing Glass Mosaic tiles using specified pattern fixing with 1 Sqm 246.00
LATICRETE 252 Ag Silver white of Equivalent and
Approved colour of joint filling with LATICRETE Cement grouting
with admix of LATICRETE 1776. Including all taxes excluding
cost of tiles
thick and pointing with specified colour Latapoxy grout of
LATICRETE SP-100 or equivalent excluding cost of tiles:600 x 600
13
SS RATE
Sl.
No
20010-11
Approved colour of joint filling with LATICRETE Cement grouting
with admix of LATICRETE 1776. Including all taxes excluding
cost of tiles
Approved colour of joint filling with LATICRETE LATAPOXY
SP-100 or EQUIVALENT including all taxes excluding cost of
tiles
75 BMT-C.39 Supply of wall tiles of Category - I of ULTRA or equivalent brand 1 Sqm 350.00
of any colour, design like Camroon, Sphinx, Opus with 10 mm
thickness including all taxes
76 BMT-C.40 Supply of wall tiles of Category - II of ULTRA or equivalent brand 1 Sqm 400.00
of any colour, design like Arrow, Bedrock, Eden, Gladstone,
Mastro, Monarch, Plato, Santo, Ultra Brique, Rhine Stone with 10
mm thickness including all taxes
77 BMT-C.41 Supply of wall tiles of Category - III of ULTRA or equivalent brand 1 Sqm 450.00
of any colour, design like Cleopatra, Simbel, Sixten, Spectra,
Elmo, Elit with 10 mm thickness including all taxes
78 BMT-C.42 Supply of sphinx or equivalent tiles for floor, wall / exterior: 1 Sqm 360.00
Regular series: floor : Veecumcy emerald, rainbow, plain tile
thickness: 20 mm (various sizes)
79 BMT-C.43 Supply of sphinx or equivalent tiles : Special economy series: 1 Sqm 460.00
floor & wall
80 BMT-C.44 Sphinx - Elegance series: Floor tiles of thickness:15 mm and Wall 1 Sqm 517.00
tiles of thickness: 9 mm -15mm - Plain design tiles
81 BMT-C.45 Sphinx - Elegance series: Floor tiles of thickness : 15mm and Wall 1 Sqm 555.00
tiles of thickness: 9 mm - 15 mm - Textured design tiles
82 BMT-C.46 Sphinx - Elegance series: Floor tiles of thickness :15 mm and Wall 1 Sqm 747.00
tiles of thickness: 9 mm - 15 mm - Premium Plain design tiles
83 BMT-C.47 Sphinx - Elegance series: Floor tiles of thickness : 15 mm and 1 Sqm 777.00
Wall tiles of thickness: 9 mm - 15 mm - Premium Textured design
tiles
84 BMT-C.48 Sphinx - Viceroy series: Floor tiles of thickness:15 mm and Wall 1 Sqm 975.00
14
SS RATE
Sl.
No
20010-11
tiles of thickness: 9 mm -15mm - Plain design tiles
85 BMT-C.49 Sphinx - Viceroy series: Floor tiles of thickness : 15mm and Wall 1 Sqm 999.00
tiles of thickness: 9 mm - 15 mm - Textured design tiles
86 BMT-C.50 Vitrified polished floor tiles of size not less than 1000 x 1000 x 10 1 Sqm 1500.00
mm thickness high glossy finish/ premium colours special series
of make RAK ceramics/ Jhonson & Jhonson/ Kajaria/ Nitco /
Marbonite
8 mm thickness high glossy finish/ premium colours special series
of make RAK ceramics/ Jhonson & Jhonson/ Kajaria/ Nitco /
Marbonite
8 mm thickness glossy finish permium colours high glossy finish/
premium colours special series of make RAK ceramics/ Jhonson &
Jhonson/ Kajaria/ Nitco /Marbonite
D PAVING & INTERLOCKING TILES (landing cost - including cost of
89 BMT-D.01 Chequered Terrazzo tiles of 22 mm thick (Medium shade) 0.254 1 sqm 229.00
M x 0.406 M
90 BMT-D.02 Chequered Terrazzo tiles of 22 mm thick (Dark shade) 0.254 M x 1 sqm 209.00
0.406 M
91 BMT-D.03 Chequered Terrazzo tiles of 30 mm thick ( Light shade) 0.305 M x 1 sqm 209.00
0.305 M
92 BMT-D.04 Chequered Terrazzo tiles of 30 mm thick (Dark shade) 0.305 M x 1 sqm 222.00
0.305 M
93 BMT-D.05 Chequered Terrazzo tiles of 30 mm thick ( medium shade) 0.305 1 sqm 196.00
M x 0.305 M
94 BMT-D.06 Supply, laying & fixing of 60 mm thick cement Mosaic reflective 1 Sqm. 610.00
concrete pavers from "Super decorative floorings" make of grade
M-40 and above including labour charges, loading & unloading,
laying to desired lines and levels complete excluding cost of
cement, sand, water, electricity etc
95 BMT-D.07 Supply, laying & fixing of 30 mm thick cement Mosaic reflective 1 Sqm. 549.00
concrete pavers from "Super decorative floorings" make of grade
M-40 and above including labour charges, loading & unloading,
laying to desired lines and levels complete excluding cost of
cement, sand, water, electricity etc
96 BMT-D.08 Supply of PHOENIX or Equivalent high strength Cement Concrete 1 Sqm 484.00
Designer Tiles of 30 mm thickness of M- 40 Grade of which top
12 mm thick shall be for colour pigmentation with imported
colours and white cement to get required reflective glazing
inclusive of all taxes
interlocking Designer Pavers of 60 mm thickness of M- 40 Grade
of which top 12 mm thick shall be for colour pigmentation with
imported colours and white cement to get required reflective
glazing inclusive of all taxes
interlocking Designer Pavers of 80 mm thickness of M- 40 Grade
15
SS RATE
Sl.
No
20010-11
interlocking Regular Pavers of 60 mm thickness of M- 40 Grade
interlocking Regular Pavers of 80 mm thickness of M- 40 Grade
101 BMT-D.13 Supply of pre-polished ready to lay floor tiles of ULTRA or 1 Sqm 485.00
equivalent brand of any colour, design and any size with 22 mm
thickness including all taxes with compressive strength not less
than 450 Kg/cm² conforming to IS 516
102 BMT-D.14 Supply of Step tiles of Category - I of ULTRA or equivalent brand 1 Sqm 555.00
of any colour, design like emperor, Dynasty with 25 mm
103 BMT-D.15 Supply of Step tiles of Category - II of ULTRA or equivalent brand 1 Sqm 619.00
of any colour, design like Stefano, Brigadia, Ventura with 25 mm
104 BMT-D.16 Supply of sphinx or equivalent tiles : Pavers: king’s path, zig zag, 1 Sqm 400.00
dumb bells, I-block - thickness: 60 mm (various sizes)
E TIMBER & ROOFING MATERIALS (landing cost - including cost of
Note: Before proposing the Teak Wood Items, the estimating
authorities shall obtain prior approval from the competent
authority
107 BMT-E.01 Medium Teak Wood scantlings: up to 2.0 M 1 cum 54738.00
108 BMT-E.02 Medium Teak Wood scantlings: 2.0 to 3.0 M 1 cum 58270.00
109 BMT-E.03 Medium Teak Wood scantlings: above 3.0 M 1 cum 61801.00
110 BMT-E.04 Medium Teak Wood Plancks: any thickness 1 cum 102414.00
111 BMT-E.05 Best Teak Wood scantlings: up to 2.0 M 1 cum 77693.00
112 BMT-E.06 Best Teak Wood scantlings: 2.0 to 3.0 M 1 cum 81225.00
113 BMT-E.07 Best Teak Wood scantlings: above 3.0 M 1 cum 84756.00
114 BMT-E.08 Best Teak Wood Plancks: any thickness 1 cum 116540.00
115 BMT-E.09 Burma Teak Wood scantlings: up to 2.0 M 1 cum 123603.00
116 BMT-E.10 Burma Teak Wood scantlings: 2.0 to 3.0 M 1 cum 127134.00
117 BMT-E.11 Burma Teak Wood scantlings: above 3.0 M 1 cum 130666.00
118 BMT-E.12 Burma Teak Wood Plancks: any thickness 1 cum 144793.00
119 BMT-E.13 Assam Teak Wood scantlings: any length 1 cum 35315.00
120 BMT-E.14 Assam Teak Wood Plancks: any thickness 1 cum 51207.00
121 BMT-E.15 Sal Wood scantlings: any length 1 cum 38847.00
122 BMT-E.16 Sal Wood Plancks: any thickness 1 cum 49441.00
123 BMT-E.17 A.C sheet Corrugated 6 mm thick 1 sqm 188.00
124 BMT-E.18 A.C sheet plain 4 m thick 1 sqm 135.00
125 BMT-E.19 A.C sheet plain 6 m thick 1 sqm 140.00
126 BMT-E.20 Plain or Corrugated Galvanized iron sheets as per IS 277 (0.1 mm 1 kg 50.00
16
SS RATE
Sl.
No
20010-11
to 0.8 mm thickness)
F MILD, GALVANIZED & STAINLESS STEEL (landing cost - including
cost of conveyance, loading & unloading)
127 BMT-F.01 MS. Hallow door frames manufactured by cold roll formed 1 Rm 233.00
process steel sheet 1.25mm thick bright CRCA confirming to IS
4351 - 1976 with Hinges tower Bolts etc.
128 BMT-F.02 Country Nails 1 Kg 45.00
129 BMT-F.03 Wire Nails 1 Kg 45.00
130 BMT-F.04 Mild Steel Tubes & pipes of all diameters as per IS-1161 1 Kg 45.00
131 BMT-F.05 Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes 1 Kg 140.00
& diameters - 204 Grade
132 BMT-F.06 Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes 1 Kg 210.00
& diameters for - 304 Grade
133 BMT-F.07 Supplying Galvanized Steel Barbed wire conforming to IS 278 - 1 Kg 59.00
1978 : Type A - IOWA Type Designation as per standard
134 BMT-F.08 Supplying Galvanized Steel Barbed wire conforming to IS 278 - 1 Kg 59.00
1978 : Type B - Glidden Type Designation as per standard
135 BMT-F.09 Expanded metal sheets as per IS-412-1962- Light Weight-25 1 Sqm 104.00
mm(SWM)x75 mm (LWM)3.25 mm Wide and 1.25 mm thick
mm(SWM)x60 mm(LWM) 2.50 mm Wide and 1.25 mm thick
138 BMT-F.12 Expanded metal sheets as per IS-412-1962- Medium Weight-25 1 Sqm 143.00
141 BMT-F.15 Expanded metal sheets as per IS-412-1962- Heavy Weight-25 1 Sqm 163.00
144 BMT-F.18 GI (M.S) fly proof wire mesh 16 x 20 gauge 1 Sqm 155.00
145 BMT-F.19 SS fly proof mesh 1 Sqm 376.00
146 BMT-F.20 Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) 1 Sqm 340.00
as per IS: 2721-1979: 2"x2" (50 mm x 50 mm) - 8 Gauge
as per IS: 2721-1979: 2½"x2½" (63 mm x 63 mm) - 8 Gauge
as per IS: 2721-1979 - PVC Coated - 2"x2" (50 mm x 50 mm) - 8
Gauge
as per IS: 2721-1979 - PVC Coated - 2½"x2½" (63 mm x 63 mm) -
8 Gauge
17
SS RATE
Sl.
No
20010-11
Gauge
Gauge
154 BMT-F.28 Rabbit wire mesh (chicken mesh) 1 Sqm 12.00
155 BMT-F.29 Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine 1 Sqm 2000.00
rolled CRCA laths, interlocked together through their entire
length and jointed together at the ends by end-locks, mounted
on specially designed pipe shaft of 50mm dia nominal bore MS B
class pipe with brackets, plates, guide channels, stoppers,
bottom locking plates and arrangements for inside & outside
locking with push-pull operations including cost of hood cover
and springs complete, painted with one coat of approved steel
primer, locks, ball bearings, all accessories etc complete for
finished item of work as per special spn: 1108
156 BMT-F.30 Supplying & fixing collapsible steel shutters with vertical, double 1 Sqm 1750.00
channel of 20 x10x2 mm of 100 mm centre ,Bracers with flat iron
40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and
side vertical frames of the collapsible gate with 65x65mmx8mm
MS Angle and middle guide rail at site height with 65mmx8mm
MS flat for the pulleys to guide and fixed with necessary hold
fasts, bolts, nuts, rivets, locking arrangements, stoppers, handles,
all accessories all fixtures and painted with one coat of approved
steel primer etc., complete for finished item of work as per
special spn 1105
G FIXTURES FOR DOORS & WINDOWS
157 BMT-G.01 Brass Tower Bolt-10 mm Bolt (IS:204) 100 mm Long Each 76.00
162 BMT-G.06 Aluminium Tower Bolt-10 mm Bolt (IS:204) 75 mm Long Each 47.00
170 BMT-G.14 MS-Powder Coated Tower Bolt-10 mm Bolt (IS:204) 100 mm Each 18.00
Long
Long
Long
Long
Long
175 BMT-G.19 Brass Butt hinges (IS:205)- 75 mm Long Each 32.00
18
SS RATE
Sl.
No
20010-11
179 BMT-G.23 Aluminium Butt hinges (IS:205)- 75 mm Long Each 68.00
183 BMT-G.27 MS-Powder Coated Butt hinges (IS:205)- 75 mm Long Each 8.00
187 BMT-G.31 Aluminium Door Handles (IS:208) 75 mm Long Each 45.00
191 BMT-G.35 MS-Powder Coated Door Handles (IS:208) 125 mm Long Each 23.00
192 BMT-G.36 MS-Powder Coated Door Handles (IS:208) 150 mm Long Each 34.00
193 BMT-G.37 Brass Aldrop (IS:2681) 300 mm long Each 675.00
196 BMT-G.40 Aluminium Aldrop (IS:2681) 200 mm long Each 200.00
199 BMT-G.43 MS-Powder Coated Aldrop (IS:2681) 200 mm long Each 80.00
202 BMT-G.46 Brass Door Stoppers Each 135.00
203 BMT-G.47 Brass Windows Stay Each 154.00
204 BMT-G.48 Aluminium Flat Latches: 200 mm long Each 96.00
207 BMT-G.51 MS-Powder Coated Flat Latches: 250 mm long Each 39.00
208 BMT-G.52 MS-Powder Coated Flat Latches: 300 mm long Each 50.00
209 BMT-G.53 MS-Powder Coated - Door Stoppers Each 34.00
210 BMT-G.54 Supply & fixing drapery rods (25.4 mm) 1" x 21 G Powder coated RM 88.00
with PVC rings
211 BMT-G.55 Supply & fixing drapery bracket - brass powder coated pair 309.00
212 BMT-G.56 Deluxe window stay Aluminium Each 88.00
213 BMT-G.57 Heavy duty Aluminium Door stopper Each 38.00
214 BMT-G.58 Brass fancy handles 150 mm Each 230.00
219 BMT-G.63 Door closer automatic hyper brand IS 3564 Each 766.00
220 BMT-G.64 Double action brass plate floor spring Hyper brand IS 6315 Each 969.00
st
221 BMT-G.65 Providing and fixing Floor spring 1 Quality for Aluminium door Each 2422.00
222 BMT-G.66 Heavy duty mortise lock 6/7 levers with PC or CP handles Each 474.00
complete set
223 BMT-G.67 Heavy duty mortise lock 6/7 levers with brass heavy handles Each 1651.00
224 BMT-G.68 Brass latch heavy 300 mm Each 394.00
19
SS RATE
Sl.
No
20010-11
227 BMT-G.71 Friction stay hinges for windows Each 74.00
228 BMT-G.72 Keyless lockset for toilet with CP or PC handles (complete set) Each 213.00
229 BMT-G.73 Keyless lock set for toilet with brass handles Each 565.00
230 BMT-G.74 Providing and fixing IS: 3564 marked Aluminium Extruded Each 710.00
Section Body Tubular Type Universal Hydraulic Door Closer with
double speed adjustment, Hardwyn make (MYTEL) with
necessary accessories and screws etc. complete
double speed adjustment, Hardwyn make (EDDY) with necessary
accessories and screws etc. complete
double speed adjustment, Hardwyn make (GAZEL) with
necessary accessories and screws etc. complete
233 BMT-G.77 Providing and fixing double action hydraulic floor spring of Each 2300.00
approved brand manufacture IS:6315 marked, Hardwyn make
M-3000 for doors including cost of cutting floors as required,
embedding in floors and S.S.cover plates with brass pivot and
single piece M.S. Sheet outer box with slide plate etc. complete
(weight capacity up to 130 kgs)
234 BMT-G.78 Providing and fixing double action hydraulic floor spring of Each 1800.00
approved brand manufacture Hardwyn make M-2000 for doors
including cost of cutting floors as required, embedding in floors
and S.S.cover plates with brass pivot and single piece M.S. Sheet
outer box with slide plate etc. complete (weight capacity up to
80 kgs)
235 BMT-G.79 Providing of Floor Spring IS: 6315 sleek in size Model HE-8400 Each 8000.00
with the S.S. Cover plates of Length 320mm x Breadth 130mm
size along with the Top Patch (HE-20), Bottom Patch (HE-10),
Door Lock (HE-50) and Pivot (502) Floor spring HE-8400 with
Double Cylinder.
H WATER PROOFING CHEMICALS & ADMIXTURES
Literature for usage / application of construction / water
proofing materials, epoxies etc, may be obtained from
manufacturers.
236 BMT-H.01 Impervious Water Proofing compound 1 Kg 24.00
237 BMT-H.02 Providing Tar felting roof repairs duly applying one coat of 1 Sqm 172.00
appropriate grade of bitumen in hot condition @ 1.2 Kg/1Sqm of
roof area, fixing tar felt (Manufactures to IS 1322/1972
specification), applying second coat of appropriate grade of hot
bitumen at 1.20 Kg/1Sqm of roof area and spreading course
aggregate (sand) at 0.063 cum per 1 Sqm of roof area finished
item
238 BMT-H.03 Providing waterproofing treatment by supplying and applying 1 Sqm. 285.00
ROOFSHIELD-1500 OR EQUIVALENT (1.50 mm thickness, 2.25Kg
per Sq. Mt and 20 X1 Mtr. roll with a centre core of 90 micron
thickness HMHDPE film) Water Proofing Membrane. A) apply
one coat of Bituminous Emulsion, first coat of bituminous grade
85/25, fix "ROOFSHIELD-1500 OR EQUIVALENT" water proofing
membrane, apply second coat of Bitumen grade 90/15 after
20
SS RATE
Sl.
No
20010-11
sealing all the joints and abutments with a Gas torch and apply
one coat of BITUMINOUS ALUMINIUM PAINT for heat resistance
for finished item
239 BMT-H.04 Providing Chemical Water proof treatment with Brick bat coba & 1 Sqm 475.00
chemical cement mortars to exposed RCC roof slab surfaces to
required slopes mixed with water proofing chemical compound,
laid over roof slab and brickbat coba treatment in chemical
cement mortar 100 mm thick at the centre and 80 mm thick at
the edges finished smooth with a floating coat of chemical mixed
cement mortar as per the manufacturer specification including
cost and conveyance of all materials like sand, chemical water
proofing compound, water etc., to site, including seigniorage
charges and operational, incidental, and labour charges for
mixing mortar, laying, lift charges, rendering smooth curing
including rounding off junctions of wall and slab etc., complete
for finished item of work. (with a guarantee of 10 years)
240 BMT-H.05 Providing Chemical Water proof treatment with Brick bat coba & 1 Sqm 400.00
chemical cement mortars to exposed RCC roof slab surfaces to
required slopes mixed with water proofing chemical compound,
laid over roof slab and brickbat coba treatment in chemical
cement mortar 80 mm thick at the centre and 60 mm thick at the
edges finished smooth with a floating coat of chemical mixed
cement mortar as per the manufacturer specification including
cost and conveyance of all materials like sand, chemical water
proofing compound, water etc., to site, including seigniorage
charges and operational, incidental, and labour charges for
mixing mortar, laying, lift charges, rendering smooth curing
including rounding off junctions of wall and slab etc., complete
for finished item of work. (with a guarantee of 10 years)
241 BMT-H.06 Construction Chemicals, Epoxy & Admixtures: Conflow SNP1 or 1 liter 66.00
Equivalent
242 BMT-H.07 Construction Chemicals, Epoxy & Admixtures: Conflow SNP20 or 1 litre 70.00
Equivalent
243 BMT-H.08 Construction Chemicals, Epoxy & Admixtures: Conflow SNPA or 1 litre 88.00
Equivalent
244 BMT-H.09 Super plasticizer: Conflow SNS I or equivalent Litre 78.00
245 BMT-H.10 Super plasticizer: Conflow SNS 2 or equivalent Litre 78.00
246 BMT-H.11 Accelerating plasticizer: Conflow SNA or equivalent Litre 84.00
247 BMT-H.12 Retarding plasticizer: Conflow SNR or equivalent Litre 66.00
248 BMT-H.13 Air Entraining Agent: Conflow SNE or equivalent Litre 56.00
249 BMT-H.14 Retarding super plasticizer: Conflow SNS-3 SPL Litre 78.00
250 BMT-H.15 Retarding super plasticizer: Conflow SNS-3 Litre 92.00
251 BMT-H.16 Mortar plasticizer: Morflow SN 1 Litre 36.00
252 BMT-H.17 Integral water proofing: Conflow SNW1 Litre 128.00
253 BMT-H.18 Integral water proofing: Conflow SNW2 Kg 11.00
254 BMT-H.19 Integral water proofing: Conflow SNW2 - 750 Gms Pack 35.00
255 BMT-H.20 Block Admixture: Conflow SNB Litre 39.00
256 BMT-H.21 Sprayed Concrete Accelerator: Shotset SN1 Kg 24.00
257 BMT-H.22 Concrete surface Treatment: Curaid SN1 Litre 71.00
258 BMT-H.23 Concrete surface Treatment: Curaid SN2 Litre 76.00
259 BMT-H.24 Formwork & Mould Treatment: Shutterol SNU Litre 77.00
260 BMT-H.25 Cleaning Agents: Uniklen SN1 Litre 49.00
21
SS RATE
Sl.
No
20010-11
263 BMT-H.28 Non-shrink Free flow grout: Expacrete SN50 Kg 13.00
266 BMT-H.31 Non-shrink Free flow grout: Expacem SN2 pack 29.00
267 BMT-H.32 Epoxy Resin Grouts: Expacrete SNE 1 Kg 724.00
268 BMT-H.33 Epoxy Resin Grouts: Expacrete SNE 3 pack 2635.00
269 BMT-H.34 Polyester Resin Grouts: Anchorset SN1 pack 181.00
270 BMT-H.35 Polyester Resin Grouts: Anchorset SN2 pack 1709.00
271 BMT-H.36 Floor Hardeners: Flortop SNC Kg 28.00
272 BMT-H.37 Floor Hardeners: Flortop SNS Kg 17.00
273 BMT-H.38 Epoxy Floor coating: Procoat SNF Pack 592.00
274 BMT-H.39 Epoxy Floor coating: Procoat SNS Pack 563.00
275 BMT-H.40 Essenputty SNE or Equivalent Pack 272.00
276 BMT-H.41 Procoat SNZ or Equivalent Pack 1333.00
277 BMT-H.42 Procoat SNL or Equivalent Pack 955.00
278 BMT-H.43 Epoxy Self Leveling (Flooring system): Flortop SNSL Pack 4035.00
279 BMT-H.44 Epoxy Self Leveling: Flortop SNSL-SPL Pack 3128.00
280 BMT-H.45 Heavy Duty Epoxy Base (Flooring):Flortop SNM Pack 1547.00
281 BMT-H.46 Flortop SNFM or Equivalent Pack 1170.00
282 BMT-H.47 Epoxy resin primer: Florcoat SNP Pack 658.00
283 BMT-H.48 Procoat SNC or Equivalent Pack 1350.00
284 BMT-H.49 Procoat SNP or Equivalent Pack 633.00
285 BMT-H.50 Procoat SNP2 or Equivalent Pack 1098.00
286 BMT-H.51 Repair Products:Repcrete SNC Kg 14.00
287 BMT-H.52 Repair Products:Repcrete SNE1 Pack 1358.00
288 BMT-H.53 Repair Products:Repcrete SNW Pack 906.00
289 BMT-H.54 Repair Products:Repcrete SNW Mortar Pack 280.00
290 BMT-H.55 Uniplug SN or Equivalent Kg 35.00
291 BMT-H.56 Water Proofing Systems: Aqua coat SNF Pack 2170.00
292 BMT-H.57 Water Repellents: Aquarepel SN1 Litre 74.00
293 BMT-H.58 Tile Adhesives: Tilegrip SNU Kg 20.00
294 BMT-H.59 Bonding Adhesives: Conbond SNA Litre 283.00
295 BMT-H.60 Bonding Adhesives: Conbond SNE Pack 757.00
296 BMT-H.61 Supply of concare anti-corrosion admixture inhibitor liquid as per Litre 207.00
Central Electro Chemical Research Institute developed
specification
297 BMT-H.62 HI-BOND: Concrete Plasticizers: HI-PLAST 01 Litre 45.00
298 BMT-H.63 Concrete Plasticizers: HI-PLAST 02 Litre 57.00
299 BMT-H.64 Concrete Plasticizers: HI-PLAST PA Litre 75.00
300 BMT-H.65 Super Plasticizers: HI-PLAST SP Litre 57.00
301 BMT-H.66 Super Plasticizers: HI-PLAST SP AR Litre 57.00
302 BMT-H.67 Accelerating Plasticizers: HI-PLAST AR Litre 72.00
303 BMT-H.68 Retarding Plasticizers: HI-PLAST RT Litre 45.00
304 BMT-H.69 Air Entraining Agents: HI-PLAST A.E Litre 45.00
305 BMT-H.70 Retarding Super Plasticizers: HI-PLAST SP RT Litre 57.00
306 BMT-H.71 HI-PLAST RSP or Equivalent Litre 75.00
307 BMT-H.72 Mortar Plasticizers: HI-PLAST MP Litre 21.00
308 BMT-H.73 Integral Water Proofing compounds: HI-PROOF (L) Litre 65.00
309 BMT-H.74 HI-PROOF (P) or Equivalent Kg 9.00
22
SS RATE
Sl.
No
20010-11
310 BMT-H.75 Pack size 750 Gms Pack 11.00
311 BMT-H.76 Block Admixtures: HI-ADMIX Litre 22.00
312 BMT-H.77 Sprayed Concrete Accelerators: HI-ACCEL Kg 22.00
313 BMT-H.78 Surface Treatments curing compounds: HI-CURE 01 Litre 57.00
314 BMT-H.79 Surface Treatments curing compounds: HI-CURE 02 Litre 60.00
315 BMT-H.80 Repair Products: HI-CRM Kg 13.00
316 BMT-H.81 HI-CRM EX or Equivalent Pack 1609.00
317 BMT-H.82 HI-CRM EXW or Equivalent Pack 804.00
318 BMT-H.83 HI-CRM EX M or Equivalent Pack 226.00
319 BMT-H.84 Water Proofing: HI-SHIELD or Equivalent Pack 1772.00
320 BMT-H.85 Water Repellents: HI-REPEL or Equivalent Litre 54.00
321 BMT-H.86 Adhesive Tile Adhesives: HI-ADHESIVE Kg 18.40
322 BMT-H.87 Bonding Adhesives: HI-FIX HFA Litre 244.00
323 BMT-H.88 HI-FIX HFE or Equivalent Pack 670.00
324 BMT-H.89 HI-BOND Wall Putty Normal or Equivalent 25 Kg 375.00
325 BMT-H.90 HI-BOND Wall Putty Fine or Equivalent 25 Kg 310.00
326 BMT-H.91 HI-BOND Wall Putty Super Fine or Equivalent 25 Kg 336.00
327 BMT-H.92 HI-BOND Wall Putty Super Fine (Water Resistant) or Equivalent 25 Kg 971.00
328 BMT-H.93 BITUMINOUS HOT SEALING COMPOUND: Grade 'A' I.S.I 1 Kg 26.00
excluding ST
329 BMT-H.94 Bitumen solution primer of approved quality 1 Kg 45.00
330 BMT-H.95 Tar Felt Type - 2 Grade - 1 1 sqm 74.00
I GLASS
331 BMT-I.01 Plain Float Glass 4 mm thick 1 sqm 334.00
332 BMT-I.02 Plain Float Glass 5 mm thick 1 sqm 427.00
333 BMT-I.03 Plain Float Glass 6 mm thick 1 Sqm 460.00
337 BMT-I.07 Tinted - Bronze/ Green Glass 4 mm thick 1 sqm 453.00
338 BMT-I.08 Tinted - Bronze/ Green Glass 5 mm thick 1 sqm 570.00
339 BMT-I.09 Tinted - Bronze/ Green Glass 6 mm thick 1 Sqm 638.00
343 BMT-I.13 Pin headed Glass 4 mm thick 1 sqm 220.00
344 BMT-I.14 Pin headed Glass 5 mm thick 1 sqm 376.00
345 BMT-I.15 Frosted / Ground Glass 4 mm thick 1 sqm 485.00
346 BMT-I.16 Frosted / Ground Glass 5 mm thick 1 sqm 609.00
347 BMT-I.17 Toughened Plain Glass 5 mm (including Glass) 1 sqm 962.00
J PAINTS & POLISHES
352 BMT-J.01 Cement Primer Waterbase Interior Gr- 1 Asian/ Berger/ Nerolac/ 1 Kg 100.00
Saicoat/Indocem or Equivalent
353 BMT-J.02 Cement Primer Waterbase Exterior Gr-2 Asian/ Berger/ Nerolac/ 1 Kg 60.00
354 BMT-J.03 Red Oxide Iron Primer Paint Grade -1 1 Litre 90.00
355 BMT-J.04 Zinc Chromate Yellow Oxide Iron Primer paint Asian/ Berger/ 1 Litre 130.00
23
SS RATE
Sl.
No
20010-11
Nerolac/ Saicoat/Indocem or Equivalent
356 BMT-J.05 Wood Primer Asian/ Berger/ Nerolac/ Saicoat/Indocem or 1 Litre 100.00
Equivalent
357 BMT-J.06 Putty for steel work Asian/ Berger/ Nerolac/ Indocem or 1 Kg 100.00
Equivalent
358 BMT-J.07 Putty for wood work Asian/ Berger/ Nerolac/ Indocem or 1 Kg 100.00
Equivalent
359 BMT-J.08 White Lead 1 Kg 72.00
360 BMT-J.09 Varnish Indocem Synthetic Clear Varnish Asian/ Berger/ Nerolac/ 1 Litre
(Indocem Paints) Or Equivalent 100.00
361 BMT-J.10 Spirit 1 Litre 70.00
362 BMT-J.11 Linseed Oil 1 Litre 40.00
363 BMT-J.12 Thinner for Melamine polish/ French polish - Sheenlac 1 Litre 92.00
364 BMT-J.13 Thinner for Poly-urethene polish 1 Litre 190.00
365 BMT-J.14 French Polish 1 Litre 132.00
366 BMT-J.15 Wax Polish (Ready made) 1 Kg 400.00
367 BMT-J.16 Melamine Polish 1 Litre 221.00
368 BMT-J.17 Poly-Urethene Polish - Interior Grade 1 Litre 450.00
369 BMT-J.18 Poly-Urethene Polish - Exterior Grade 1 Litre 550.00
370 BMT-J.19 Fevicol/ Wood adhesive compound 1 Kg 156.00
371 BMT-J.20 Dry Powder Distemper 1 Kg 30.00
372 BMT-J.21 Oil Bound Washable Distemper Acrylic Based Asian/ Berger/ 1 Kg 60.00
Nerolac/ Saicoat/Indocem or Equivalent
373 BMT-J.22 Plastic Emulsion Paint Asian/ Berger/ Nerolac/ Saicoat/Indocem 1 Litre 180.00
or Equivalent
374 BMT-J.23 Royale Emulsion Paint 1 Litre 300.00
375 BMT-J.24 Water proof Cement paint of Snowcem/ Indocem Or Equivalent 1 Kg 35.00
376 BMT-J.25 Acrylic Exterior Emulsion Asian/ Berger/ Nerolac/ 1 Litre 136.00
377 BMT-J.26 Water proof Cement paint Snowcem Indocem or Equivalent 25 Kg 820.00
378 BMT-J.27 Surya Cem or equivalent quality 25 Kg 350.00
379 BMT-J.28 Anti Corrosive bitumen paint (Black ) grade1 Indocem or 1 Litre 360.00
Equivalent
st
380 BMT-J.29 Aluminium paint 1 Grade Indocem or Equivalent 1 Litre 180.00
381 BMT-J.30 Synthetic Enamel paints in all shades Grade - I Asian/ Berger/ 1 Litre 170.00
Nerolac / Indocem or Equivalent
382 BMT-J.31 Synthetic Enamel paints in all shades Grade - II Asian/ Berger/ 1 Litre 130.00
Nerolac / Indocem or Equivalent
383 BMT-J.32 Supplying and finishing Synthetic plaster comprising of Acrylic 1 Sqm 60.00
emulsion binder with sieved fillers, application performance
additives like thickeners, anti cracking and biocides - interior
grade (Altek superfine/ sai coat/ Neon superfine or equivalent)
384 BMT-J.33 Supplying and finishing Synthetic plaster comprising of Acrylic 1 Sqm 60.00
emulsion binder with sieved fillers, application performance
additives like thickeners, anti cracking and biocides - interior
water resistant grade (Altek superfine W/R / sai coat/
Neon/indocem or equivalent)
385 BMT-J.34 Supplying and finishing Synthetic ready mix plaster comprising of 1 Sqm 70.00
Acrylic emulsion binder with bigger size sieved fillers, application
performance additives like thickeners, surface levelling for heavy
undulations - interior grade (Altek coarse / sai coat/
24
SS RATE
Sl.
No
20010-11
Neon/indocem or equivalent)
386 BMT-J.35 Supplying and finishing Synthetic ready mix plaster comprising of 1 Sqm 70.00
Acrylic emulsion binder with bigger size sieved fillers, application
performance additives like thickeners, surface levelling for
medium undulations - interior grade (Altek fine / sai coat/ Neon
or equivalent)
387 BMT-J.36 Supply & Application of Two Coats of Altek/sai coat/ Neon Super 1 Sqm. 95.00
Fine, One Coat of Altek/ sai coat/ Neon Water Based Cement
Primer & Two Coats of Altek Flora/ sai coat/ Neon/indocem
super track for internal walls (Emulsion Paint)
388 BMT-J.37 Supply & Application of Two Coats of Altek/sai coat/ 1 Sqm. 90.00
Neon/indocem Super Fine, One Coat of Altek/sai coat/ Neon
Water Based Cement Primer & Two Coats of Delight for internal
walls (Acrylic Washable Distemper)
389 BMT-J.38 Supply & Application One Coat of Altek/ sai coat/ Neon/indocem 1 Sqm. 96.00
Water Based Cement Primer & Two Coats of Altek Harmony/sai
coat/ Neon Espro with fungicides for exterior walls (Emulsion
Paint Exterior Grade).
390 BMT-J.39 Supply & Application of One Coat of Altek/sai coat/ 1 Sqm. 110.00
Neon/indocem Water Based Cement Primer & Two Coats of
Altek Alltimate/sai coat/ Neon weather flex for exterior walls
(Acrylic Emulsion Paint Exterior grade)
391 BMT-J.40 Altek 1127 / Indocem Wall Magic/ Saicoat / Birla - Wallbond 20 Kg 575.00
Putty with White Cement & Polymer Base/ Cement Based Putty
392 BMT-J.41 Altek Top Coat High UV resistant Exterior Paint 25 Kg 1403.00
393 BMT-J.42 Altek Deco Orient Base Exterior Texture 25 Kg 527.00
394 BMT-J.43 Altek Gold line Exterior Texture 25 Kg 1033.00
395 BMT-J.44 NCL Skim coat 1127 is white cement based, polymer modified 1 Sqm 65.00
dry mix putty, specially made to work on levelled, cement
sponge finished interior and exterior surfaces. Supply and
application of Two Coats of Cement based putty 1127, inclusive
of all taxes for finished item of work
396 BMT-J.45 Supply & application of One coat of Altek Water base Cement 1 Sqm 60.00
Primer & two coats of top coat high UV resistant & water
resistant exterior paint, inclusive of all taxes for finished item of
work
397 BMT-J.46 Supply & application of One Coat Water based Cement Primer, 1 Sqm 205.00
One coat of Deco Orient Base Exterior Texture & two coats of
Altek Harmony (Emulsion paint exterior grade) inclusive of all
taxes for finished item of work
398 BMT-J.47 Supply & application of One coat of Water based Cement Primer, 1 Sqm 215.00
One coat of Gold line Exterior Roller Finish, inclusive of all taxes
for finished item of work
399 BMT-J.48 Supply & Application of two coats of Saicoat Or Equivalent 1 Sqm 140.00
suferfine acrylic spray plaster one coat of Saicoat water base
cement primer and two coat of Saicoat Premium Emulsion for
interior walls
400 BMT-J.49 Supply & Application of one coat of Saicoat Or Equivalent water 1 Sqm 160.00
base cement primer exterior & two coat of Saicoat Weatherflex
Elastromeric exterior emulsion with antifunges for exterior wall (
Emulsion Paints Exterior Grade)
401 BMT-J.50 Saicoat Or Equivalent Wallbond White Cement & Polymer base 1 Sqm 170.00
25
SS RATE
Sl.
No
20010-11
putty specially made to work on leveled, cement sponge finished
interior and exterior surfaces,Supply and application of two coat
of Saicoat Wallbond putty, one coat of Saicoat water base primer
exterior & two coat of Saicoat Weatherflex elastomeric exterior
emulsion, Inclusive of all taxes for finished item of work
402 BMT-J.51 Supply and application of one coat of Saicoat Or Equivalent Re - 260.00
Ino Texture & two coat Saicoat Weatherflex elastomeric exterior
emulsion ,Inclusive of all taxes for finished item of work
K PARTICLE BOARDS
403 BMT-K.01 Plain Particle Board: Interior Grade - 6 mm thick 1 Sqm 183.00
408 BMT-K.06 Plain Particle Board: Interior Grade - 21.4 mm thick 1 Sqm 334.00
411 BMT-K.09 Plain Particle Board: Exterior Grade- 8 mm thick 1 Sqm 229.00
412 BMT-K.10 Plain Particle Board: Exterior Grade-12 mm thick 1 Sqm 255.00
414 BMT-K.12 Plain Particle Board: Exterior Grade-21.4 mm thick 1 Sqm 392.00
417 BMT-K.15 Melamine faced Single Deco PPB- 8 mm thick 1 Sqm 475.00
422 BMT-K.20 Melamine faced Twin Deco PPB- 8 mm thick 1 Sqm 546.00
423 BMT-K.21 Melamine faced Twin Deco PPB- 12 mm thick 1 Sqm 624.00
424 BMT-K.22 Melamine faced Twin Deco PPB-18 mm thick 1 Sqm 722.00
427 BMT-K.25 Natural Colour-Insulating Board - 12 mm thick 1 Sqm 177.00
430 BMT-K.28 White Insulating Board - 12 mm thick 1 Sqm 216.00
433 BMT-K.31 Extra for veneered particle Board with commercial veneering on 1 Sqm 105.00
both sides.
434 BMT-K.32 Extra for veneered particle Board with Veneering on both sides 1 Sqm 222.00
with one side teak veneered and other side commercial
veneered
435 BMT-K.33 Extra for veneered particle Board with Teak veneering on both 1Sqm 347.00
sides
436 BMT-K.34 Medium Fibre Board: Interior Grade - 6 mm thick 1 Sqm 288.00
437 BMT-K.35 Medium Fibre Board: Interior Grade - 8 mm thick 1Sqm 327.00
26
SS RATE
Sl.
No
20010-11
444 BMT-K.42 Medium Fibre Board: Exterior Grade - 6 mm thick 1 Sqm. 393.00
452 BMT-K.50 MDF Board: Plain-Interior - 9 mm thick 1 Sqm 264.00
458 BMT-K.56 MDF Board: Plain-Exterior - 9 mm thick 1 Sqm 346.00
464 BMT-K.62 MDF Board: Interior-One Side Laminated -9 mm thick 1 Sqm 415.00
470 BMT-K.68 MDF Board: Exterior-One Side Laminated -9 mm thick 1 Sqm 477.00
476 BMT-K.74 MDF Board: Interior-Both Side Laminated -9 mm thick 1 Sqm 474.00
482 BMT-K.80 MDF Board: exterior-Both Side Laminated -9 mm thick 1 Sqm 534.00
488 BMT-K.86 BISON PANEL CEMENT BONDED PARICLE BOARD CONFORMING 1 sqm 159.00
TO IS 14276-6 mm thick
TO IS 14276- 8 mm thick
27
SS RATE
Sl.
No
20010-11
497 BMT-K.95 BISON LAM PRE LAMINATED CEMENT BONDEDPARTICLE BOARD- 1 sqm 495.00
6 mm thick
8 mm thick
10 mm thick
12 mm thick
16 mm thick
502 BMT-K.100 BISON DESIGNER BOARD Available Designs 1. Lumber 2. Quadra 1 sqm 183.00
3.Murk Standard size 8’X4’ 10’X4’- 6mm thick
507 BMT-K.105 V-Board-Cement Bonded Board - 4mm Thick 1 Sqm 111.00
516 BMT-K.114 Laminate Sheets - Glossy Finish: 1.00 mm thick 1 Sqm 282.00
517 BMT-K.115 Laminate Sheets - Glossy Finish: 1.50 mm thick 1Sqm 405.00
518 BMT-K.116 Laminate Sheets - Glossy Finish: 1.80 mm thick 1Sqm 444.00
519 BMT-K.117 Laminate Sheets - Mat Finish: 1.00 mm thick 1 Sqm 301.00
520 BMT-K.118 Laminate Sheets - Mat Finish: 1.50 mm thick 1 Sqm 418.00
521 BMT-K.119 Laminate Sheets - Mat Finish: 1.80 mm thick 1Sqm 451.00
522 BMT-K.120 Teak Veneer Lamination - 4 mm thick - Pencil Grains 1 Sqm 316.00
523 BMT-K.121 Teak Veneer Lamination - 4 mm thick - Natural Grains 1 Sqm 582.00
28
SS RATE
Sl.
No
20010-11
L PLYWOOD
524 BMT-L.01 3 Ply - 4 mm thick Plywood(IS:303) MR Grade 1 Sqm 278.00
531 BMT-L.08 3 Ply - 4 mm thick Plywood(IS:303) BWR/BWP Grade 1 Sqm 318.00
538 BMT-L.15 3 Ply-4 mm thick One side Teak Veneer Decorated Plywood 1 Sqm 412.00
(IS:1328)
539 BMT-L.16 5 Ply - 6 mm thick One side Teak Veneer Decorated Plywood 1 Sqm 536.00
(IS:1328)
(IS:1328)
(IS:1328)
542 BMT-L.19 5 Ply - 9 mm thick Both sides Teak Veneer Decorated Plywood 1 Sqm 896.00
(IS:1328)
543 BMT-L.20 9 Ply - 12 mm thick Both sides Teak Veneer Decorated Plywood 1 Sqm 1045.00
(IS:1328)
M CEILINGS, WALL PARTITIONS & WALL LININGS
544 BMT-M.01 Gypsum Board 0.595 M x 0.595 M of 12.5 mm thick as per IS 1 Sqm 220.00
2095 -1992
545 BMT-M.02 Gypsum Board 0.595 M x 0.595 M of 9 mm thick as per IS 2095 - 1 Sqm 215.00
1992
546 BMT-M.03 Gypsum Board Plain sheet 12.5 mm thick as per IS 2095 -1993 1 Sqm 200.00
547 BMT-M.04 G.I. Ceiling Angle - 25 mm x 10 mm x 0.55 mm 1 RM 65.00
548 BMT-M.05 G.I. Ceiling Section 51.5 mm x 26 mm x 10.5 mm x 0.55 mm thick 1 RM 74.00
549 BMT-M.06 G.I. Intermediate Section 45 mm x 15 mm x 15 mm x 0.9 mm 1 RM 73.00
550 BMT-M.07 G.I. Perimeter Channel - 20 mm x 27 mm x 30 mm(web) of 0.55 1 RM 65.00
mm thick
551 BMT-M.08 G.I.-Precoated Fine line Grid 25 mm x 25 mm x 0.7 mm 1 RM 36.00
552 BMT-M.09 G.I.-Precoated Fine line Grid 15 mm x 25 mm x 0.7 mm 1 RM 33.00
553 BMT-M.10 GI - Precoated - T-Sec- 24 mm x 38 mm x 0.7 mm thick 1 RM 47.00
554 BMT-M.11 Hot dipped GI Angle - Precoated - Grid: 19 mm x 19 mm 1 RM 35.00
555 BMT-M.12 Polyester painted GI - T Section - 24 x 32 mm 1 RM 44.00
556 BMT-M.13 Polyester painted GI - T Section - 24 x 25 mm 1 RM 39.00
557 BMT-M.14 Polyester painted GI - T Section - 24 mm x 27 mm 1 RM 40.00
558 BMT-M.15 Aluminium Angle : 24 mm x 24 mm 1 RM 23.00
559 BMT-M.16 Anodised Aluminium T Section : 24 x 24.5 x 2.4 mm 1 RM 30.00
560 BMT-M.17 Connecting Clips 1 Each 2.00
561 BMT-M.18 Rawl Plug 1 Each 1.50
562 BMT-M.19 6 mm Nylon Rawl Plug 1 Each 2.50
563 BMT-M.20 Soffit Cleats 1 Each 1.50
29
SS RATE
Sl.
No
20010-11
564 BMT-M.21 Drywall Screws - 25 mm 1 Each 1.50
565 BMT-M.22 Jointing Compound 1 Kgs 25.00
566 BMT-M.23 Jointing Paper Tape 1 RM 5.00
567 BMT-M.24 Drywall Top Coat 1 Litre 125.00
568 BMT-M.25 Universal Holding Clips 1 Each 2.50
569 BMT-M.26 4 mm Dia GI Connecting Rod 1 RM 10.00
570 BMT-M.27 2 mm Dia GI Connecting Rod 1 RM 8.00
571 BMT-M.28 12 mm - Armstrong Mineral Fibre sheet 600 x 600 1 Sqm 385.00
572 BMT-M.29 15 mm - Armstrong Mineral Fibre sheet 600 x 600 1 Sqm 450.00
573 BMT-M.30 15 mm - Armstrong Tegular Edge 600 x 600 1 Sqm 485.00
574 BMT-M.31 12 mm - Daiken Mineral Fibre sheet 600 x 600 1 Sqm 390.00
575 BMT-M.32 15 mm - Daiken Mineral Fibre sheet 600 x 600 1 Sqm 460.00
576 BMT-M.33 15 mm - Daiken Tegular edge sheet 600 x 600 1 Sqm 500.00
577 BMT-M.34 12 mm - AMF Mineral Fibre sheet 600 x 600 1 Sqm 385.00
578 BMT-M.35 15 mm - AMF Mineral Fibre sheet 600 x 600 1 Sqm 450.00
579 BMT-M.36 15 mm - AMF Tegular edge sheet 600 x 600 1 Sqm 485.00
580 BMT-M.37 Supply of Thermocole 12 mm thick sheets 1 Sqm 23.00
581 BMT-M.38 Supply of Thermocole 19 mm thick sheets 1 Sqm 40.00
582 BMT-M.39 Supply &fixing 75mm thick metal stud partition using 12.5 mm 1 Sqm 1072.00
thick Gypboard conforming to IS 2095-1982 screw fixed to either
side to 48 mm studs of 0.55 mm thick with the 50 mm floor and
ceiling channel 0.55 mm and the joints duly finished with joint
compound, paper tape and two coats Dry wall top coat as per
specification.
583 BMT-M.40 Providing wooden panelling 12 mm thick Novapan one side 1 Sqm 1587.00
laminated sheet fixed on wooden frame of BT wood size 50.8
mm x 25.4 mm (2"x1") at distance of 609.6mm (2'-0") intervals of
both ways providing 3/4" x 1/2" (19.05 mm x 12.7 mm) size BT
wood ornamental cover beading and necessary screws, fevicol
glue complete for finished item of work.
584 BMT-M.41 Supply , manufacturing , installing of library Rack of 19 mm thick 1 Sqm 6796.00
ISI marked commercial ply All round boxing verticals, Horizontal
for depth of 609.6mm (2'-0) and shelves with 3.5 mm thick teak
veneer covered with on exposed surface externally and internally
and each panels with 6mm thick ISI commercial ply with 3.5 mm
thick teak veneer for glazed shutters teak wood size 55 mm x
28mm with 5 mm thick glass fixed with ornamental beading and
other ornamental beading is covered as per drawing including
brass hinges, ornamental handles, ball catchers, buffers, locking
system etc, and all the commercial ply exposed edges are to be
covered with 6 mm thick teak wood lipping. All the teak veneer
and teak wood and ornamental beading is coated with polishing
and a coat of melamine finish etc, for finished item of work.
585 BMT-M.42 Ramco-Hilux Calcium Silicate Boards - 6mm thick 1sqm 202.00
589 BMT-M.46 Supply and Fixing 66mm thick metal stud partition screw fixed to 1sqm 1131.00
either side of 48mm studs of 0.55mm thick with 50mm floor and
ceiling channel 0.55mm and the joints duly finished with joining
compound, glass fibre tape and two coats dry wall top coat as
per specification finished Item of work- using 8mm thick Ramco
30
SS RATE
Sl.
No
20010-11
Hilux boards
per specification finished Item of work - Using 10mm thick
Ramco Hilux boards
per specification finished Item of work - Using 12mm thick
Ramco Hilux boards
592 BMT-M.49 Supply and fixing of Ramco Hilux wall lining fixing to GI channels 1sqm 671.00
of perimeter channel 30mm x 27mm x 0.55 thick and ceiling
channels of 51.1mm x 26mm x 10.5mm x 0.55mm thick and
fixing and finishing using joint compound and glass fibre tape
complete finish as per specification without painting for finished
item of work: using 8mmthick Ramco Hilux board
item of work: Using 10mm thick Ramco Hilux boards
item of work: Using 12mm thick Ramco Hilux boards
595 BMT-M.52 Supply and Fixing 66mm thick metal stud partition using 2 layers 1sqm 3759.00
of 12mm thick Ramco Hilux boards screw fixed to either side to
48mm studs of 0.55mm thick with 50mm floor and ceiling
channel 0.55mm.The boards joints are to be staggered to avoid
through passage. Ceramic wool of 50mm thick, 64kg/m3 density
is to be placed in cavity of the partition. The joints duly finished
with joining compound, glass fibre tape and two coats dry wall
top coat as per specification with out painting for finished item
of work
596 BMT-M.53 Supply of Plaster of paris Boards 12 mm thick 1 Sqm 392.00
597 BMT-M.54 Supply of Plaster of Paris Boards 10 mm thick 1 Sqm 327.00
598 BMT-M.55 DECOCEIL DESIGNER CEILING BOARD - DECOCEIL Patterns: 1. 1 Sqm 232.00
Tikka 2. Forraplus 3. Chemerraplus (sizes 4x2 , 4x4 , 2x2 )
Thickness 3.2 mm
599 BMT-M.56 Everest Cement Boards (High Pressure Steam Cured) 4 mm thick 1 Sqm. 112.00
602 BMT-M.59 Everest Cement Boards (High Pressure Steam Cured) 10 mm 1 Sqm. 247.00
thick
thick
31
SS RATE
Sl.
No
20010-11
thick
thick
thick
thick
608 BMT-M.65 Everest Designer Boards 4 mm thick 1 Sqm. 187.00
609 BMT-M.66 Everest Designer Boards 6 mm thick 1 Sqm. 280.00
610 BMT-M.67 Supply and fixing of E-board wall panelling (water, fire and 1 Sqm. 750.00
Termite proof) with frame work made of GI stud profile of size 48
x 40 10 x 0.6 mm thick placed at every 610 mm C/C intervals
fixed vertically in between floor and roof Ù’ track of size 50 x 30
x 0.6 mm thick duly fixed with self expansion screws and with 8
mm thick E-board / 6 mm thick E-board classic cladded around
with self tapping self embedding screws fixed at every 300 mm
(centres) leaving a 3 mm gap between two panels of width 2’-0”.
The Gap will be covered with a decorative beading. Surface will
be given a smooth finish over a coat of primer. - With 8 mm E-
board
611 BMT-M.68 Supply and fixing of E-board wall panelling (water, fire and 1 Sqm. 800.00
Termite proof) with frame work made of GI stud profile of size 48
x 40 10 x 0.6 mm thick placed at every 610 mm C/C intervals
fixed vertically in between floor and roof Ù’ track of size 50 x 30
mm thick E-board / 6 mm thick E-board classic cladded around
with self tapping self embedding screws fixed at every 300 mm
(centres) leaving a 3 mm gap between two panels of width 2’-0”.
The Gap will be covered with a decorative beading. Surface will
be given a smooth finish over a coat of primer. - With 6 mm E-
board Designer
612 BMT-M.69 Supply and fixing double skin E-board partition with Frame work 1 Sqm. 1100.00
made of GI stud profile of size 48 x 40 x 10 x 0.6 mm thick placed
at every 610 mm C/C intervals and 915 mm horizontal intervals
duly fixed with self expansion screws, the E-board of 8 mm thick
cladded around with self tapping self embedding screws fixed at
every 300 mm (centres) leaving 3 mm gap between two panels
of width 2’-0” (610 mm). The gap will be covered with decorative
moulding surface will be given a smooth finish over cement
primer. The rate is inclusive of cost and conveyance of all
materials and labour charges etc. complete.
613 BMT-M.70 Providing and fixing of 50mm thick EVEREST SOLID WALL PANEL 1 sqm 1345.00
Sandwich panels made of light Weight FRACC two 4mm thick
non-asbestos fibre reinforced cement sheets on either side of
the lightweight concrete core composed of Portland cement
binders with tongue and groove arrangement. The bottom of the
panel shall be fixed to the floor channel made up of 1 mm thick
GI channels of size 14x50x25 mm fixed to the existing floor with
6x60mm nylon self expansion screws at 600 mm C/C and top of
the panel fixed with ceiling channel made out of 1mm thick GI
Channel of size 38x50x38mm duly fixed to the existing ceiling
32
SS RATE
Sl.
No
20010-11
with 6x60mm nylon self expansion screws at 600 mm C/C. All the
tongue and groove joints of the panels have to be properly
cleaned and both the panels have to be fixed by applying the
mixture of fly ash and sodium silicate in between and Everest
jointing compound all the exposed joints. The rate includes cost
of 50mm EVEREST SOLID WALL PANELS, G.l. Floor and ceiling
channel. The panels can be flushed by using paper tape and
Everest jointing compound all complete
614 BMT-M.71 Providing and fixing of 75mm thick EVEREST SOLID WALL PANEL 1 Sqm. 1722.00
Sandwich panels made of light Weight FRACC two 4mm thick
non-asbestos fibre reinforced cement sheets on either side of
the lightweight concrete core composed of Portland cement
binders with tongue and groove arrangement. The bottom of the
panel shall be fixed to the floor channel made up of 1 mm thick
GI channels of size 14x75x25 mm fixed to the existing floor with
6x60mm nylon self expansion screws at 600 mm C/C and top of
the panel fixed with ceiling channel made out of 1mm thick GI
Channel of size 38x75x38mm duly fixed to the existing ceiling
with 6x60mm nylon self expansion screws at 600 mm C/C. All the
tongue and groove joints of the panels have to be properly
cleaned and both the panels have to be fixed by applying the
mixture of fly ash and sodium silicate in between and Everest
jointing compound all the exposed joints. The rate includes cost
of 75mm EVEREST SOLID WALL PANEL panels, G.l. Floor and
ceiling channel. The panels can be flushed by using paper tape
and Everest jointing compound all complete.
615 BMT-M.72 BISON PANEL (IS 14276) FALSE CEILING-Supply and fixing of 1Sqm 690.00
BISONPANEL (IS 14276) false ceilingusing 8MM BISONPANEL with
galvanized and pre painted steel T section of size 24mm x 38mm
x 0.4mm for main T duty pre punched to accept cross T section
of size 24mm x 30mm x 0.4mm duly punched at both ends for
insertion into main T. The grid size will be 610mm x 610mm. The
frame work (grid) is suspended to the roof by using G.I flat of
0.60mm or 14-gauge G.I wire with necessary fixers to the roof
and frame work. BISONPANEL lay on the grid. The cost inclusive
of necessary hardware, labor, one coat of primer (Both side) and
two coats of smooth finish on visible side.
616 BMT-M.73 BISON PANEL(IS 14276) WALL PANELING-Supply and fixing 1 Sqm 960.00
BISONPANEL(IS 14276) wall paneling using 10 MM BISONPANEL
with frame work made of GI stud section of size 48mm x 35mm x
0.55mm thick placed at every 610 mm C/C intervals vertically
and at 1200mm internals horizontally fixed to the wall by means
of self expansion screws and caps. BISONPANEL is to be fixed to
frame by means of self taping screws placed at every 300 mm
intervals leaving 3mm gap between two panels. The cost
inclusive of one coat of Altek primer and two coats of Altek
smooth finish and cost & conveyance of all materials, labor
charges etc. complete as per the direction of Engineer in charge.
617 BMT-M.74 BISON PANEL (IS 14276) DOUBLE SKINPARTITIONS-Supply and 1 Sqm 1400.00
fixing BISONPANEL (IS 14276) double skin partition using with 10
MM BISONPANEL made out of G.I. track section of size 50mmx
35mm x 0.55 mm for fixing to the roof and floor and stud section
of size 48mm x 35mm x 0.55mm placed in track section vertically
33
SS RATE
Sl.
No
20010-11
at 610mm intervals and at 1200mm intervals horizontally fixed
to the wall by means of self expansion screws and caps to the
wall and roof. BISONPANEL is to be fixed both sides of frame
work by using self taping screws fixed at every 300mm intervals
to the frame work leaving 3 mm gap between two panels. The
cost inclusive with one coat of Alltek primer and two coats of
Alltek smooth finish and cost and conveyance of all materials to
site, labor charges etc., complete as per the direction of Engineer
in charge.
618 BMT-M.75 BISON LAM (Pre Laminated Cement Bonded Particle Board) 1 Sqm 2000.00
DOUBLE SKIN PARTITIONS-Supply and fixing of BISONLAM double
skin partition using with 12MM BISONLAM made out of G.I track
section of size 50 mm x 35mm x 0.55mm for fixing to the roof
and floor and stud section of size 48mm x 35mm x 0.55mm
placed in track section vertically at 610mm intervals and at
1200mm internals horizontally. The frame is fixed by means of
self expansion screws and caps to the wall / roof. BISON LAM is
to be fixed both sides of the frame work by using 2mm thick
electro plated CR flat section leaving 3mm gap between two
panels. The cost inclusive of cost and conveyance of all materials
to sites, other materials incidentals and labour charges as per the
direction of Engineer in charges.
619 BMT-M.76 BISON LAM ( Pre Laminated Cement Bonded Particle Board) 1 Sqm 1500.00
WALL PANELING-Supply and fixing of BISONLAM wall paneling
using 12MM BISONLAM with frame work made of G.I stud
section of size 48mm x 35mm x 0.55mm thick placed at every
610mm intervals vertically and at 1200mm internals horizontally
fixed to the wall by means of self expansion screws and caps.
BISON LAM is to be fixed to frame by means of self-taping screws
placed at every 300mm intervals leaving 3mm gap between two
panels. The cost inclusive of Conveyance of materials, Labor
charges etc., complete as per the direction of Engineer in charge
620 BMT-M.77 BISON LAM ( Pre Laminated Cement Bonded Particle Board) 1 Sqm 2625.00
ALUMINIUM PARTATIONS-Supply and fixing of BISON LAM
aluminum glazed partitions using 10MM BISONLAM and 5.50
mm thick plain glass to full height. Using with BISON LAM to a
height of 0.91 meter at bottom panel and remaining height with
glass and aluminum sections anodized to 12 to 15 microns and of
sections of size 37mm x 62mm and 1.5mm thickness with one
meter centre to centre duly fixed with clip beading on both sides
including fixing the frame to pillars by M.S. flats, bolts and nuts
including cost and conveyance of all materials etc., complete
621 BMT-M.78 Providing and fixing 50mm thick “RAJSHRI” or Equivalent SEMI 1 sqm 2700.00
HEIGHT SOLID PVC PARTITION consisting of 49mm sandwich PVC
panel made out of 36mm high density expanded polystyrene
sheet(E.P.S.-Thermocole) stuck on both side with 2mm thick
plain/printed /prelam PVC rigid foam sheets reinforced with
frame work made from 35mmX5mm M.S. Angle. In between two
M.S. Angles 5mm thick plain/printed/prelam heat moulded
“Rajshri” PVC ‘C’ channel of size 50X100mm with feathered
edges shall be fixed on the floor & 50X75mm with feathered
edges plain/printed /prelam PVC ‘C’ channel. In between
adjoining EPS sandwiched PVC partitions panel 5mm
34
SS RATE
Sl.
No
20010-11
thickX75mm width plain/printed/prelam PVC sheet feathered at
edges shall be stuck on front & back face using solvent cement
etc. in places where two partitions meet to from an ‘L’ shape the
panels are joined 5mm thick plain/printed/prelam heat moulded
“Rajshri” PVC ‘L’ section of size 75mmX75mm with feathered
edges shall be fixed on front & back side. This is done to maintain
the symmetry of design. An additional 5mm thick PVC strip of
40mm width is to be stuck on the interior side of the ‘C’ Channel
using PVC solvent adhesive, complete as per direction of
Engineer-in-Charge, manufacture’s specification & drawing
622 BMT-M.79 Providing and fixing “RAJSHRI” or Equivalent INSULATED PVC 1 sqm 2000.00
WALL PANELING shall consist of PVC insulated panels having wall
thickness of 1mm /1.5mm/2mm PVC sheet and the desired
thickness of EPS (dependent on the insulation required) screwed
into the wall using screws of adequate length. The screws shall
be placed at a distance of 150mm and shall be 25mm from the
edge of the insulated panel on all from sides of the panel. The
PVC strips of 5mm thick PVC sheet of width 75mm feathered at
the edges shall be stuck using solvent cement adhesive at the
places where two panels are joined, so a to cover the screw of
both the panels, using solvent cement. 90 heat bent strips of
5mm thick PVC sheets of width 75mm X75mm feathered at the
edges shall be stuck at wall joints / pillars etc. , complete as per
direction of Engineer-in-Charge, manufacture’s specification &
drawing
623 BMT-M.80 RAJSHRI SOLID PVC WALL LINING Providing and fixing RAJSHRI or 1 sqm 1900.00
equivalent plain PVC rigid foam sheet wall panelling of thickness
5mm consisting of panels having size 1220mm X2440mm stuck
on inner frame work of 25mm wide strips of 5mm thick PVC rigid
foam sheet. The strips should have in their centre a grove of
6mm width and 2mm depth for sinking the head of the screw
used to fix the strips to the wall and should be placed vertically
at equal intervals of 405/407mm centre to c entre. The PVC
strips shall be fixed to the wall using 65mm long M.S. screws
through the groove in the strip by using PVC fasteners. The
distance between two screws shall not be more than 300mm. a
groove of 2mm may be left at the joint of two panels for
aesthetic looks. This framework is done for making existing wall
surface in ensured level and for sticking the wall panelling sheet
(panel) on it. The exact size of the panel and correspondingly of
the grid May be varied depending n the size of the wall. However
it must be ensured that a strips of 5mm thick PVC sheet of width
75mm feathered at the edges shall be stuck at the places where
two panels are joined, using solvent cement. , complete as per
direction of Engineer-in-Charge, manufacture’s specification &
drawing
624 BMT-M.81 Providing and fixing RAJSHRI or Equivalent false ceiling consisting 1 sqm 1200.00
of 600mmX600mm, Solid PVC insulation panels having wall
thickness of 1mm thick plain PVC rigid foam sheet and EPS as
defined in of desired thickness depending on insulation required
shall be insert in a frame work made using anodized aluminium
Tee section of sizes 1”X1” (25X25mm, 19 gauge or 1mm thick) in
square pattern of grid sizes of 2’X2’ (600X600mm). The
35
SS RATE
Sl.
No
20010-11
aluminium framework is supported from the ceiling with the help
of G.I. hook and G.I. wire/6mm.M.S. rods of required sizes to
maintain proper level etc. the aluminium framework is
supported on side wall with the use of aluminium 1”X1”
(25X25mm) angles, complete as per direction of Engineer-in-
Charge, manufacture’s specification & drawing
625 BMT-M.82 Inssula Mineral Fibre Ceiling Tile of 0.595 mm x 0.595 mm of 13 1 Sqm 329.00
mm thick Square Edge - Fissura Fine Model
mm thick Square Edge - Speckle Model
mm thick Square Edge - Textura Model
628 BMT-M.85 Inssula Ceiling Tile of 0.595 mm x 0.595 mm of 15 mm thick 1 Sqm 415.00
Standard Regular Edge
Fissura Fine Model
Speckle Model
Textura Model
632 BMT-M.89 Supply and fixing of PVC false ceiling on MS/GI made skeleton 1 Sqm. 1335.00
framework. The frame shall be 24 X 48mm MS tube section fixed
along with the wall. The entire frame work shall be concealed
with PVC section having overall dimensions of 6 X 250mm with a
wall thickness of 1mm ± 0.3mm with tongue and groove system,
provided with necessary arrangements for electrical connections,
complete, for finished item of work.
633 BMT-M.90 Supply and fixing of wall panelling on the framework of wooded 1 Sqm. 1273.00
rippers of 24 X 24mm of required size. The entire framework
shall be panelled with PVC section having overall dimensions of 6
X 250mm with a wall thickness of 1mm ± 0.3mm. The panels are
joined with tongue and groove system. Necessary cut-outs for
electrical connections to be provided at required places
634 BMT-M.91 Supply and fixing of PVC Double Skin Partition. The entire Sqm. 2219.00
framework shall be carried out by mild steel section having
overall dimensions of 24 X 48mm with a wall thickness of 1.2mm.
The entire framework shall be concealed with PVC section having
overall dimensions of 6 X 250mm with a wall thickness of 1mm ±
0.3mm both sides. Glass provision/Door provision can be
provided along the partition wherever required. Partitions can
be made full or half as per requirement complete, for finished
item of work.
635 BMT-M.92 NCL or Equivalent Partitions: Supply and fixing of partitions made
of seccolor pre-painted steel (base steel as per IS 513 of 0.58 mm
thick ‘D’ quality, galvanized as per IS 277 with Zinc of 120 GSM).
Primer coated with epoxy primer of 5-7 microns thick, finish
painted with a polyester paint of 12-16 microns thick alkyd
backer. Section for outer frame should be 46x52mm, section for
shutter should be 46x46mm, section for mullion should be
46x70mm, section for beading should be 18x25mm and section
for middle and bottom rail (Lock Rail and Kick Rail) of size should
36
SS RATE
Sl.
No
20010-11
be 23x130mm. The partition should be paneled with 9mm pre-
laminated particle board to a height of 0.91m from the bottom,
and remaining height with 5mm thick plain glass With Ethyl
Propylene Diamine Monomer (EPDM) Gaskets. The sections are
to be cut to length, mitre joined with corner bracket Centre
mullions are to be fixed using mullion cap. Gaskets made of
Ethyl Propylene Diamine Monomer (EPDM). Corner brackets
made of CRCA with zinc phosphate. Mullion caps made of Glass
filled nylon. The above frames should be fixed to the
concrete/masonry wall by means of self expanding screws, and
complete for finished item of work.
636 BMT-M.93 Fixed Partition: Outer frame section size of 46x52mm, mullion 1 sqm 3591.00
section should be of 46x70mm, fixed beading should be of
18x25mm.
637 BMT-M.94 Fixed Partition with Door: Outer frame section size of 1 sqm 4096.00
46x52mm, mullion section should be of 46x70mm, fixed beading
should be of 18x25mm, section for shutter should be of
46x46mm and section for middle & bottom should be of size
23x130mm
638 BMT-M.95 Supply & fixing of 50mm thick Aerocon/ V-panels sandwich Sqm. 1300.00
Panels having Tongue and Groove joint for partitions and walls
using G.I. Flooring & Ceiling channels, hardware, Labour,
transportation, wastages, etc., as a complete item of work
excluding finishing, fittings & fixtures.
639 BMT-M.96 Supply & fixing of 75mm thick Aerocon/ V-Panel sandwich Panels Sqm. 1650.00
having Tongue & groove joint for partitions And walls using G.I.
Flooring & Ceiling channels, hardware, Labour, transportation,
wastages, etc., As a complete item of work Excluding finishing,
fittings & fixtures
640 BMT-M.97 Aerocon/ V- Panels - 50mm thick x 600mm standard width x 1 Sqm. 900.00
2400mm, 2700mm, 3000mm & 3300mm lengths
641 BMT-M.98 Aerocon/ V- Panels - 75mm thick x 600mm standard width x 1 Sqm. 1175.00
2400mm, 2700mm, 3000mm & 3300mm lengths
N DOORS
642 BMT-N.01 Providing and fixing factory made polyvinyl chloride (PVC) Door 1 Rm 303.00
Frame of the size 50 x 47mm with a wall thickness of 5mm, made
out of extruded 5mm rigid PVC foam sheet, mitre cut at two
corners and joined with 2nos. of 150mm long brackets of
15x15mm M.S. square tube. The two vertical door profiles are to
be reinforced with 19x19mm M.S. Square tube of 19 gauge. The
door frame shall be fixed to the wall using 65/100mm long M.S.
Screws through the frame by using PVC fasteners. A minimum of
4nos. of screws to be provided for each vertical member &
minimum 2nos. for horizontal member etc. complete as per
manufacturers specification and direction of Engineer-in-Charge
for finished item of work
643 BMT-N.02 Providing and fixing 30mm thick Solid panel PVC door shutter 1 Sqm. 2205.00
consisting of frame made out of M.S. tubes of 19 gauge thickness
and size of 19mm x 19mm for stiles, & 15mm x 15mm for top &
bottom rails. M.S. frame shall have a coat of steel primers of
approved make and manufacture. M.S. frame shall be covered
with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm
37
SS RATE
Sl.
No
20010-11
forming stiles, and 5mm thick, 75mm wide PVC sheets for top
rail, lock rail & bottom rail on either side, and 10mm (5mm x 2)
thick, 20mm wide cross PVC sheet as gap insert for top rail &
bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the
M.S. frame welded / sealed to the stiles & rails with 30mm wide
x 5mm thick PVC sheet beading on either side, and joined
together with solvent cement adhesive etc. An additional 5mm
thick PVC strip of 20mm width is to be stuck on the interior side
of the ‘C’ Channel using PVC solvent adhesive. Complete as per
direction of Engineer-in-charge, manufacturer’s specification &
drawing for finished item of work.
644 BMT-N.03 Providing and fixing 30mm thick “RAJSHRI” or Equivalent BRAND 1 sqm 2700.00
FACTORY MADE BOTHSIDE PRELAM SOLID PANEL PVC DOOR
SHUTTER consisting of frame made out of MS. Tubes of 19gauge
thickness and size of 19mmX19mm for stiles, top and bottom
rails. MS. Frame shall have a coat of steel primers of approved
make and manufacture. MS. Frame covered with 5mm thick heat
moulded “Rajshri” Prelam Pac ‘C’ channel of size 30mm
thickness, 70mm width out of which 50mm shall be flat and
20mm shall be tapered in 450 angle on either side forming stiles;
and 5mm thick, 95mm wide Rajshri Prelam Pac sheet out of
which 75mm shall be flat and 20mm shall be tapered in 450 on
the inner side to form top and bottom rail 115mm wide Rajshri
Prelam Pac sheet out of which 75mm shall be flat and 20mm
shall be tapered on both sides to form lock rail. Top, bottom and
lock rail shall be provided either side of the panel. 10mm
(5mmX2) thick, 20mmwide cross Pac sheet shall be provided as
gap insert for top and bottom rail. Panelling of 5mm thick both
side Prelam Pac sheet to be fitted in the MS. Frame welded/
sealed to the stiles & rails with 7mm(5mm+2mm) thick X 15mm
wide Pac sheet beading on inner side, and joined together with
solvent cement adhesive etc. an additional 5mm thick Pac strip
of 20mm width is to be stuck on the interior side of the ‘C’
channel using Pac solvent cement adhesive etc. complete as per
direction of Engineer – in-charge, manufacture specification and
drawing.
FACTORY MADE SOLID SINGLE SIDE PRELAM PANEL PVC DOOR
SHUTTER consisting of frame made out of MS. Tubes of 19gauge
thickness and size of 19mmX19mm for stiles, and 15mmX15mm
for top and bottom rails. The MS. Frame shall have a coat of steel
primers of approved make and manufacture. MS. Frame covered
with 5mm thick heat moulded “Rajshri” single side Prelam Pac ‘C’
channel of size 30mmX50mm to form stiles.5mm thick& 75mm
wide single side prelim Pac sheets shall be for the top, bottom
and lock rails. Panelling of 5mm thick one side Pac sheet to be
fitted in the MS. Frame and sealed to the front (prelam side)
stiles and rails (which should have a 5mm 45 bent portion as
beading) and attached to the back (white/ivory) stiles and rails
which should have a 10mm 900 bent portion as beading) using
2nos. 15mm wide X 5mm thick Pac sheet beading inside the 90
bent beading. All stiles, rails and beadings are to be joined to the
panel using solvent cement etc. an additional 5mm thick Pac
38
SS RATE
Sl.
No
20010-11
strip of 20mm width to be stuck on the interior side of the ‘C”
channel using Pac solvent cement adhesive and 10mm (5mmX2)
thick, 20mm wide cross Pac sheet to be fitted as gap insert for
top and bottom rail etc. complete as per direction of Engineer –
in-Charge, manufacture specification and drawing.
646 BMT-N.05 SUPPLY & FIXING or RAJSHRI or Equivalent SINGLE SIDE PRELAM 1 Rm 340.00
SOLID PANEL PVC DOOR FRAME (CHOUKHAT) Providing and
fixing factory made Pac single side Prelam door frame of the size
50X47 mm with a wall thickness of 5mm, made out of extruded
5mm rigid Pac single side prelam sheet, meter cut at two corners
and joined with 2nos. of 150mm long brackets of 1515mm
MS.Square tube. The two vertical door profiles are to be
reinforced with 19X19mm MS. square tube of 19guage. The door
frame shall be fixed to the wall using 65/100mm long MS. Screws
through the frame by using Pac fasteners. a minimum of 4nos. of
screws to be provided for each vertical member and minimum
2nos. for horizontal member etc. complete as per manufacture
specification and direction of Engineer-in-charge.
FACTORY MADE MOULDED DOOR SHUTTER consisting of sold
core single leaf flush door of 30mm thickness, lipped with 15mm
(5mmX3) thick X 30mm width on one stiles and top rails and
10mm (5mmX2) thick X 30mm width on the other stiles and
bottom rails. The inner panel laminated with 2mm thick termite
proof, water proof and fire resistant moulded Pac sheet with
2,4,6 raised panel design in different panel and / or prelam
colours on one side after routing the moulded design on flush
door and 2mm prelam Pac sheet on other side using rubber
adhesive on flush door and solvent cement adhesive on Pac
lipping etc. complete as per direction of Engineer-in-Charge,
manufacture specification and drawing
648 BMT-N.07 RAJSHRI or Equivalent MOULDED PVC DOOR – WOOD FREE 1 sqm 2475.00
Providing and fixing 30mm thick Rajshri Brand factory made
Moulded door shutter- wood free consisting of frame made out
of MS. tubes 19gauge thickness and size of 25mmX25mm for
stiles, top and bottom rails. MS. Frame shall have a coat of steel
primers. The inner panel shall consist of 25mm thick High density
EPS conforming to IS 4671-1984 bounded with 2mm thick
termite proof, water proof and fire resistant moulded Pac sheet
with 2,4,6 raised panel design in different plain and / or prelam
colours after routing to the moulded design on one side and
2mm plain and / or prelam Pac sheet on other side of the EPS.
The edge of panel to be sealed with lipping of 10mm wide PVC
sheet bottom (made by sticking 2 rigid foam sheet of 5mm
thickness using Pac solvent cement) and stiles sides
25mm(5mmX5) thick and 30mm width Pac sheet fitted along Ms.
Tube for lock provision for lock height 5mm thick Pac sheet of
size 150mmX100mm fixed with upper and lower face of inner
side of EPS Panel etc. Complete as per direction of Engineer – in-
Charge, manufacture specification and drawing
FACTORY MADE WIRE MESH SOLID PVC DOOR SHUTTER
consisting of frame made out of M.S. tubes of 19 gauge thickness
39
SS RATE
Sl.
No
20010-11
and size of 19mmX19mm for stiles and 15mm for top, lock &
bottom rails. MS. Frame shall have a coat of steel primers of
approved make and manufacture. 19mmX19mm M.S. square
tubes shall be covered with 5mm thick heat moulded “Rajshri”
PVC ‘C’ channel of size 30mm thickness, 90mm width out of
which 75mm shall be flat and 15mm shall be flat and 15mm shall
be bent in 900 on the inner side to from top and bottom rail land
130mm wide PVC sheet out of which 100mm shall be flat and
154mm shall be bent in 900 on both side to from lock rail,
10mm(5mmX2) thick, 20mm wide cross PVC sheet as gap insert
for top rail & bottom rail. Panel will be of G.I.wire mesh of
24gauge to be fitted in by ’C’ channel of size 35mm X10mm on
the either side in the stiles. The inner side ‘C’ channel is fixed by
19mmX19mm MS. Tube on both sides with screws. The wire
mesh in top bottom & lock rail is sealed with15mm X 15mm tube
with G.I.wire 10mm(5mmX2) thick PVC strip of 25mm width is to
be stuck& nails on both side of G.I. wire mesh interior at the top,
bottom & lock rail. An additional 5mm thick PVC srip of 20mm
width is to be stuck on the interior side of the ‘C’ channel using
PVC solvent cement adhesive etc. complete as per direction of
Engineer-in-charge, manufacturer’s specification & drawings
650 BMT-N.09 Providing and fixing “RAJSHRI” PVC door cladding to the flush 1 sqm 377.00
doors shutters. For the new doors it shall be pasted with Fevicol
SOR 998 or nailed to the old doors. complete as per direction of
Engineer –in – charge, manufacturers specification and drawing -
1 mm thick
1.5 mm thick
2.0 mm thick
653 BMT-N.12 Flush door shutters, solid bond wood block board type with teak 1 sqm 1168.00
ply on both faces.: 25 mmthick conforming to IS:2202 of
ANAND/RAAVILA/KUTTY/STANDARD/SHUBHDWAR/ITP
656 BMT-N.15 Flush door shutters, solid bond wood block board type with 1 sqm 595.00
commercial ply on both faces.: 25 mmthick conforming to
IS:2202 of ANAND/ RAAVILA/ KUTTY/ STANDARD/ SHUBHDWAR/
ITP
40
SS RATE
Sl.
No
20010-11
ITP
ITP
ITP
veneer on one face and commercial ply on another face (lipping):
20 mmthick conforming to IS:2202 of ANAND/ RAAVILA/ KUTTY/
STANDARD/ SHUBHDWAR/ ITP
665 BMT-N.24 Supply and fixing of E-board door shutter with alround style “U” 1 Sqm. 1102.00
lipping size 15 x 18 x 15 mm made from 0.8 mm thick powder
coated cold rolled steel profiles with 16 mm thick E-board with
necessary screws fixed at 1’-0” interval 250 mm long aldrops 2
Nos. M.S. nickel coated 250 mm long 1 No. M.S. Tower bolts
including cost and conveyance of all materials at site and
applying 1 coat of primer, 2 coats of luppum and 2 coats of
synthetic enamel paint as per approved design for finished item
of work.
666 BMT-N.25 Providing and fixing frame made from 1.2 mm powder coated 1 Sqm. 1680.00
cold rolled steel profiles of overall section size of 60 mm x 45 mm
with 21 mm rivet for shutter with necessary stiffeners hinges and
screws. E-board shutter with alround Ù’ lipping of size 15 X 18 X
15 mm made from 0.8 mm thick CRCA powder coated steel
profile with 16 mm thick E-board with necessary screws fixed at
every 1’-0” interval 250 mm long aldrops 2 Nos. MS Nickel
coated 250 mm long 1 No. MS tower bolt including cost and
conveyance. One coat of primer, 2 coats of luppum and 2 coats
of synthetic enamel paint as per approved colour, labour charges
etc.
667 BMT-N.26 BISON PANEL (IS 14276) CUP BOARD SHUTTERS - Supply and 1 sqm 1506.00
fixing of BISONPANEL(IS 14276) cup board frames and shutters
and using 16mm BISON PANEL dulypainted both sides with one
41
SS RATE
Sl.
No
20010-11
coat of primer and two coats of synthetic / enamel paint of
approved shade and brand including fixing of hardware like M.S.
powder coated Piano hinges of size 18mm x 18mm, brass ball
catches, Aluminum tower bolts and handles , Godrej locks,
Fevicol, screws and nails including cost and conveyance of all
materials, labor charges, all incidental and operational charges
etc., complete for finished item of work at site as per the
directions of Engineer in Charge.
668 BMT-N.27 BISON PANEL(IS 14276) SINGLE DOOR SHUTTER -Supply and 1 Sqm 1250.00
fixing BISONPANEL (IS 14276) single door shutter using with
16MM BISONPANEL with all-round "U" section of size
12mmx18mmx12mm made from 0.6 mm thick galvanized, color
quoted cold rolled steel profiles with necessary screws fixed at
every 304.8 mm intervals. The cost inclusive of MS Nickel coated
Aldrops of size 255 mm long 2 Nos., 200 mm long tower bolts 1
No., 125 mm handles 2 Nos. 300 mm long "T" hinge cost and
conveyance of all materials at site and applying 1 coat primer, 1
coat of luppum and 2 coats of synthetic enamel paint as per
approved design for finished item of work.
669 BMT-N.28 BISON PANEL (IS 14276) DOUBLE DOOR SHUTTER -Supply and 1 Sqm 1708.00
fixing of BISON PANEL(IS 14276) door shutters using with 16MM
BISONPANEL with all round style “U” size of 20mmx18mm
x20mm made from 0.6mm thick galvanized pre-painted cold
rolled steel profiles with BISONPANEL separating two shutter
with 30mmx18mmx30mm Stepped lipping with necessary screws
fixed at every 1’-0” (304.8mm) intervals. Ms Nickel coated 250
mm long aldrops 2 no’s, MS powder coated 250mm long tower
bolt 2no’s , & 2no’s MS powder coated 125 mm long grip handle.
Including cost and conveyance of all materials at site and
applying one coat of primer, 2 coats of lappum and 2 coats of
of work.
670 BMT-N.29 BISON LAM (Pre Laminated Cement Bonded Particle Board) 1 Sqm 1500.00
SINGLE SHUTTER - Supply and fixing of BISON LAM single door
shutter using 16MM BISONLAM with all round section “U” size of
mm thick galvanized pre-painted cold rolled steel profiles BISON
LAM with necessary screws fixed at every 1’0” ( 304.8mm)
intervals. The cost inclusive of MS Nickel coated 250mm long
aldrops 2 no’s , MS powder coated 250mm long tower bolt 1
no’s, 2no’s MS powdercoated 125mm long grip handle, 1 no’s
M.S.P.C. Door stopper. Including cost and conveyance of all
materials at site labour charges etc., complete finished item of
work.
671 BMT-N.30 BISON LAM (Pre Laminated Cement Bonded Particle Board) 1 Sqm 1800.00
DOUBLE DOOR SHUTTER - Supply and fixing of BISON LAM
double door shutter using 16MM BISONLAM with all round “U”
section size of 20mm x 18mm x 20mm made from 0.6mm thick
galvanized pre-painted cold rolled steel profiles with BISON LAM
separating two shutter with 30mm x 20mm x 30mm stepped
lipping with necessary screws fixed at every 1’0” (304.8mm)
intervals. The cost inclusive of MS Nickel coated 250mm long
aldrops 2no’s, MS powder coated 125mm long grip handle, 2
no’s M.S.P.C. Door stopper. Including cost and conveyance of all
42
SS RATE
Sl.
No
20010-11
materials at site labour charges etc., complete finished item of
work.
672 BMT-N.31 Doors Frames (Colour Coated Steel Sections) & Shutter using 1 Sqm 2558.00
Cement Bonded Particle Board as per IS 14276 (Bison Panel or
Equivalent) : Providing and fixing of door frame made from cold
roll formed sections made of galvanized (Base steel as per IS277
with zinc of 120 Gms/sqm) colour coated steel sections with
total coated thickness of 1mm, primer coated with epoxy primer
coat of 5-7 microns thick, finish paint with polyester paint of 12-
16 microns. The Section for door frame is to be filled with
polyurethane (P.U) form of 40kg/m3. Overall size of frame
section should be of 50mm x 50mm. With necessary corner
brackets, stiffeners, hinges, and screws. Cement Bonded particle
board shutter (Bison Panel or Equivalent) “Single Leaf” with all
round styles “U” section of size 12m x 18m x 12mm made from
0.6 mm thick galvanized, colour coated cold rolled steel profiles
with 16mm thick Cement Bonded particle Board (Bison Panel or
Equivalent) with necessary screws fixed at every 1’-0” (304.8mm)
intervals. The cost inclusive of MS nickel coated Aldrop of size
250mm long 2nos. 200mm long tower bolt 1no., 125mm handles
2nos., cost and conveyance of all materials at site and applying
one coat primer , one coat of luppum and two coats of synthetic
enamel paint as per approved design for finished item of work
673 BMT-N.32 CUPBOARD FRAMES & SHUTTERS USING BISONLAM (Pre- 1 Sqm 2250.00
Laminated Cement Bonded Particle Board) - Supply and fixing of
BISONPANEL (IS 14276) box type cup board using BISONPANEL
for making frame of size 100mm x 35mm using two sandwiched
16MM boards, one BISONPANEL and one BISONLAM with plain
35mm wood lipping. The Shutters are made of 16MM thick
BISONLAM (Pre-Laminated Cement Bonded Particle Board) of
approved shade inclusive of hardware like M.S. powder coated
Piano hinges of size ¾” x ¾” , Aluminum powder coated handles
of size 4” (101.6mm), Aluminum tower bolt 4” (101.6mm) Godrej
locks, screws, wood lipping and Fevicol etc., complete finish item
of work.
674 BMT-N.33 BISON LAM (Pre laminated Cement Bonded Particle Board) 1 Sqm 1500.00
SINGLE DOOR SHUTTERS - Supply and fixing of BISONLAM door
shutter made out of U sections of size 12x14x12 made from
0.6mm thick pps sections with 12MM BISONLAM with necessary
screws fixed at every 1’.0”interwells. The hardware consists of
250mm long aldrop – 2 Nos.150mm Handle- 1 No , 150 mm long
ms powder coated tower bolt 1 no. nickle coated. The cost is
inclusive of all incidentals, labor transportation charges.
675 BMT-N.34 Supply and fixing of V- Board door shutter with alround style “U” 1 Sqm 1400.00
lipping size 15 x 18 x 15 mm made from 0.8 mm thick powder
coated cold rolled steel profiles with 16 mm thick V-board with
necessary screws fixed at 1’-0” interval 250 mm long aldrops 2
nos. M.S. nickel coated 250 mm long 1 no. M.S. Tower Bolts
Including cost and conveyance of all materials at site and
applying 1 coat of primer, 2 coats of luppum and 2 coats of
of work.
43
SS RATE
Sl.
No
20010-11
676 BMT-N.35 Providing and fixing frame made from 1.2 mm powder coated 1 Sqm 1650.00
cold rolled steel profiles of overall section size of 60 mm x 45 mm
with 21 mm rivet for shutter with necessary stiffeners hinges and
screws. V- Board shutter with alround style “U” lipping of size 15
x 18 x 15 mm made from 0.8 mm thick CRCA powder coated
steel profile with 16 mm thick V-board with necessary screws
fixed at every 1’-0” interval 250 mm long aldrops 2 nos. M.S.
nickel coated 250 mm long 1 no. M.S. Tower Bolts Including cost
and conveyance. One coat of primer, 2 coats of luppum and 2
coats of synthetic enamel paint as per approved colour, labour
charges etc.,.
677 BMT-N.36 Supply and fixing Sintex or equivalent doors are made out of PVC Sqm. 2018.00
section and panels. The overall dimension of the same is 33mm X
47mm with usual process variation and having a wall thickness of
1.5mm with a variation of ± 0.3mm. The infill is seamless hallow
multi chambered PVC single panel having an effective dimension
of 762mm X 20mm having a wall thickness of 1mm ± 0.3mm
678 BMT-N.37 Supply and fixing PVC door frames made from extruded sections 1 RM. 189.00
in overall dimensions of 40 X 48mm having a wall thickness of
1.5mm with usual process variation of ± 0.3mm, complete, for
finished item of work.
679 BMT-N.38 Supply and fixing of V-board wall panelling (water, fire and 1 Sqm 860.00
termite resistant) with frame work made of GI stud profile of size
48 x 40 x 10 x 0.6 mm thick placed at every 610 mm C/C intervals
fixed vertically in between floor and roof ‘U’ track of size 50 x 30
mm thick V- Board / Cladded around with self tapping self
embedding screws fixed at every 300 mm (centres) leaving a 3
mm gap between two panels of width 2’-0”. The Gap will be
covered with a decorative beading. Surface will be given a
smooth finish over a coat of primer. Inclusive of all taxes: With 8
mm V- Board
680 BMT-N.39 Supply and fixing double skin V- Board partition with Frame work 1 Sqm 1300.00
made of GI stud profile of size 48x40x 10x 0.6 mm thick placed at
every 610 mm C/C intervals and 915 mm horizontal intervals duly
fixed with self expansion screws, the V- Board of 8 mm thick
cladded around with self tapping self embedding screws fixed at
every 300 mm (centres) leaving a 3 mm gap between two panels
of width 2’-0”(610 mm). The Gap will be covered with a
decorative moulding surface will be given a smooth finish over
cement primer. The rate Inclusive of cost and conveyance of all
materials and labour charges etc., Complete. DOUBLE SKIN
PARTITION
681 BMT-N.40 Supply and fixing of PVC cupboards for kitchen and bedrooms 1 Sqm. 4050.00
shall be made out of multi chambered PVC sections having
overall dimensions of 20 X 762mm with a wall thickness of
1.2mm ± 0.3mm. The cabinets shall be made as per the
requirements of the room with groove system. The PVC section
surface shall be plain and laminated finish to have good look,
completed, for finished item of work for SINTEX OR EQUIVALENT
PVC CABINETS
44
SS RATE
Sl.
No
20010-11
682 BMT-N.41 Supply and fixing of Sintex Frontura door shutter consisting of 1 Sqm. 3120.00
Sintex make or equivalent FRP (Fibre Reinforced Plastic) panels
on either sides with depressed panelled design for door having
overall wall thickness of 1.5mm + 0.35 mm with usual process
variation. The core of the door shutter shall be filled with
Polyurethane foam (PUF) injected with the help of Hydraulic
Injection method, wooden black of 35mm x 31mm shall be
provided on all four side of the door shutter. Necessary wooden
blacks shall be provided to take up necessary hard wares and
fixtures etc. with steel wire mesh at the centre of the door the
rate inclusive of all taxes and finished item work. Max size:
838mm (W) x 2060mm(H) Colour GOLDEN BROWN. SINTEX
FRONTURA DOOR SHUTTER (25MM THICK)
683 BMT-N.42 Supply and fixing of Sintex Frontura door shutter consisting of 1 Sqm. 3400.00
Sintex make or equivalent FRP (Fibre Reinforced Plastic) panels
on either sides with depressed panelled design for door having
overall wall thickness of 1.5mm + 0.35 mm with usual process
variation. The core of the door shutter shall be filled with
Polyurethane foam (PUF) injected with the help of Hydraulic
Injection method, wooden black of 35mm x 31mm shall be
provided on all four side of the door shutter. Necessary wooden
blacks shall be provided to take up necessary hard wares and
fixtures etc. with steel wire mesh at the centre of the door the
rate inclusive of all taxes and finished item work Max size:
838mm (W) x 2060 (H)Colour Golden Brown SINTEX FRONTURA
DOOR SHUTTER (35MM THICK)
684 BMT-N.43 Supply and fixing of Sintex Door shutter made from specially Hot 1 Sqm. 2600.00
Press Moulded SMC ( Sheet moulding compound) sheets,
Polyurethane core and PVC Frame section SMC sheets shall be
made from SMC conforming to IS-13410 sheet shall have an
average thickness of 1.5mm + 0.35mm.Core of the door shutter
shall be filled with high density polyurethane foam, injected with
the help of hydraulic injection method shutter frame to be made
of PVC extruded section confirming to IS:10151:1982 of size
26mm x 47mm with a wall thickness of 1.5mm + 0.3mm
corresponding to Sintex code DWUF 305. The hardware
locations shall be reinforced with special polymeric
reinforcement wooden blocks of suitable size. The corners of the
shutter frame shall be reinforced with Polymeric ‘L’ shaped angle
of size 105mm x 230mm corresponding to Sintex code PR-02 the
lock rail shall be made from PVC extruded sections having overall
dimensions of 26mm x 47mm 1.5mm + 0.3mm, with usual
process variation corresponding to Sintex code DWUF 305
Combining two numbers. Wooden pieces are inserted on the
periphery. Suitable MS Tube reinforcement shall be provided on
vertical sides of shutter frame the rate inclusive of all taxes and
finished item work Colour: White & Grey
SINTEX ENDURA DOOR SHUTTER (26MM THICK)
685 BMT-N.44 Supply and fixing of door shutters made of rigid PVC extruded 1 Sqm. 1570.00
hollow section(Nandi or equivalent) of 20mm X 200 mm with the
wall thickness of 1.0mm +/- 0.1mm equally divided into 4 no's
with tongue and groove locking arrangements. The shutter frame
is made of 58 X 24 mm with the wall thickness of 1.5mm +/-
45
SS RATE
Sl.
No
20010-11
0.15mm section mitre-cut and joined at 4 corners with 125mm X
225mm plastic brackets. The shutter shall be horizontally
reinforced with 2 no's of 8mm PVC rods. Teak wood batons shall
be reinforced inside the door shutter during the fabrication of
the door shutter at those points wherever the hardware is fixed
on to the door shutter. PVC DOOR SHUTTER (Nandi or
Equivalent)
686 BMT-N.45 Supply and fixing of door shutters made of rigid PVC extruded Sqm. 1795.00
hollow section(Nandi or equivalent) of 20mm X 200 mm with the
wall thickness of 1.0mm +/- 0.1mm equally divided into 4 no's
with tongue and groove locking arrangements. The shutter frame
is made of 30mm X 79mm with the wall thickness of 1.5mm +/-
0.15mm section mitre-cut and joined at 4 corners with 125mm X
225mm plastic brackets. The shutter shall be horizontally
reinforced with 2 no's of 8mm PVC rods. Teak wood batons shall
be reinforced inside the door shutter during the fabrication of
the door shutter at those points wherever the hardware is fixed
onto the door shutter.
687 BMT-N.46 Supply and fixing of door frame made of hollow extruded PVC 1 RM 215.00
section (Nandi or equivalent) having dimensions of 40 X 57mm
with the wall thickness of 2mm +/- 0.2mm duly reinforced with
seasoned wood plank at the hinges side. The door frame top 2
corners shall be metri-cut/ welded. PVC DOOR FRAME (Nandi or
Equivalent)
688 BMT-N.47 Supply and fixing of door frame made of hollow extruded PVC 1 RM 187.00
section (Nandi or equivalent) having dimensions of 40 X 46 mm
with the wall thickness of 2mm +/- 0.2mm duly reinforced with
seasoned wood plank at the hinges side. The door frame top 2
corners shall be mitre cut/welded
689 BMT-N.48 Supply & fixing of Fly mesh shutters of size 20 x 40 mm fly proof 1 Sqm 1022.00
mesh with std. Spn (S.S.) fly mesh including cost and conveyance
of all materials, and labour charges etc. complete for finished
item of work.: Single shutter 2'-0" x 4'-0" (609.6x1219.2mm)
shutter section size 20 x 40 mm
item of work.: Double shutter 3'-0" x 4'-0" (914.4 x 1219.2mm)
item of work.: Double shutter 4'-0" x 4'-0" (1219.2 x 1219.2mm)
mesh with Netlon fly mesh including cost and conveyance of all
materials, and labour charges etc. complete for finished item of
work.: Single shutter 2'-0" x 4'-0" (609.6x1219.2mm) shutter
section size 20 x 40 mm
46
SS RATE
Sl.
No
20010-11
work.: Double shutter 3'-0" x 4'-0" (914.4 x 1219.2mm) shutter
work.: Double shutter 4'-0" x 4'-0" (1219.2 x 1219.2mm) shutter
695 BMT-N.54 Supply & fixing of Door frames made of all formed sections of 1RM 204.00
1.25mm thick CRCA section, size should be 50x60mm with 32mm
rebate. The corner of the frame should be welded. The frame
should be painted with one coat of primer and finished painted
with pure polyester paint. The frame should be provided with
approved quality butt hinges of 3 Nos. complete for finished
item.: Single shutter 3'-0" x 7'-0" (914.4x2133.6mm) outer frame
section size of 50 x 60 mm
696 BMT-N.55 Supply & fixing of Door frames made of all formed sections of 1 RM 204.00
1.25mm thick CRCA section, size should be 50x60mm with 32mm
rebate. The corner of the frame should be welded. The frame
should be painted with one coat of primer and finished painted
with pure polyester paint. The frame should be provided with
approved quality butt hinges of 3 Nos. complete for finished
item.: Double shutter 5'-0" x 7'-0" (1524 x 2133.6mm) outer
frame section size of 50 x 60 mm
697 BMT-N.56 Supplying & fixing of Door frame made of roll formed section of 1 RM 232.00
1.25 mm thick CRCA section, size should be 50 x 60 mm with 32
mm rebate. The corner of the frame should be welded. The
frame should be painted with one coat of primer and finished
painted with pure polyester paint. The frame should be provided
with approved quality butt hinges of 3 Nos. Complete for
finished item of work.: Single shutter 3'-0" x 7'-0"
(914.4x2133.6mm) outer frame section size of 50 x 75 mm
698 BMT-N.57 Supplying & fixing of Door frame made of roll formed section of 1 RM 232.00
1.25 mm thick CRCA section, size should be 50 x 60 mm with 32
mm rebate. The corner of the frame should be welded. The
frame should be painted with one coat of primer and finished
painted with pure polyester paint. The frame should be provided
with approved quality butt hinges of 3 Nos. Complete for
finished item of work.: Single shutter 5'-0" x 7'-0"
(1524x2133.6mm) outer frame section size of 50 x 75 mm
699 BMT-N.58 NCL or Equivalent Door Frames: Providing and fixing door 1 RM 586.00
frames fabricated from sections made of galvanized steel
powder coated (base steel as per IS 513, galvanised as per IS 277
with zinc of 120 grams / square metre). The factory made section
should be with a Powder Coating of pure Polyester Powder of 50-
60 microns thick with total coated thickness of 1.25 mm. Size of
door frame section should be of 105x60mm with a rebate of
38mm to accommodate 35mm thick door shutter. The frame
section should have groove to insert gasket. The section of the
door and fan light frame is to be filled with polyurethane foam.
The frame section should be cut to length, and joined by way of
welding and each frame should be provided with: a) 2mm thick
MS powder coated butt hinges of 100nn long – 3 Nos. for single
47
SS RATE
Sl.
No
20010-11
shutter, 6 Nos. for double shutter. b) CRCA Electroplates
stiffeners of 6 Nos. – 3 in each vertical. c) 40mm x 200mm x
1.2mm hold fasts screwed to stiffeners – 6 Nos. with split end
tail. d) Nylon Aldrop Receiver – 1 No. for single shutter frame.
e)Tie Rod – 1 No
700 BMT-N.59 Supply and fixing of ELIXIR OR EQUALENT DOOR FRAMES factory 1 RM 385.00
made Internal door frames without threshold, fabricated from
pre-painted cold roll formed section 100mm x 60 mm made of
galvanized ( base steel as per IS – 513 ‘D’ quality, galvanized as
per IS-277 with Zinc of 120 Gms/sqm) steel colour coated
sections with total coated thickness of 1 mm, primer coated with
epoxy primer of 5-7 microns thick, finish painted with polyester
paint of 12-16 microns and back coated with alkyd backer of 5-7
microns. The frame section is to be filled with polyurethane (P.U.
Foam) of 40 Kg/Cum; and the sections are cut to length and
mitre joined by means of 1.25mm thick CRCA electroplated
corner brackets of size 75 x 75 mm and 1.25mm thick
electroplated stiffeners of size 150mm for fixing hold fasts and
hinges together with the following MS Power coated fitting
(Supply and fixing ) of approved make a) 6 Nos M.S. Z. Type hold
fasts made of 30mm x 3 mm MS flat of 230mm long, 3 Nos each
side expandable PVC covered screw type fasteners b) 2.5 mm x
300 mm long ‘T’ hinges / 2.5mm x 50 mm x 100mm two way but
hinges (3 Nos for single leaf or 2 Nos for Double leaf /leaf ) c) 12
mm Dia MS tie rod at bottom with necessary size of nuts on
either side
701 BMT-N.60 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 1 sqm 5697.00
sliding doors three track - only two glass shutters sliding - 95 -
Series duly manufactured using UPVC reinforced profiles of
95.50 mm x 60 mm x 2.25 mm for outer frames, 66 mm x 42 mm
x 2.25 mm for sliding door shutter frames capable of mounting
single glazing system, structurally reinforced with hot dip
galvanized up to 50 microns of minimum thickness of 1.2 mm
prefabricated & welded through fusion welding the window sash
shall be fitted with 5 mm thick clear float glass of reputed make
duly fixed with EPDM weathering seal resistant accessories like
clipping locking system made of aluminium 1 No., per set of
sashes and the system is to be installed at the site using anchor
fasteners, silicon rubber sealant, easy glazing/ deglazing at site
etc., including cost and conveyance of all materials, accessories,
labour charges for transportation, erection at site with templates
for casement sizing complete for finished item of work (Elgi/
Polywood/ Sintex / NCL/ Fenesta etc)
sliding doors three track - two glass shutters sliding and one
mesh shutter sliding- 95 -Series duly manufactured using UPVC
reinforced profiles of 95.50 mm x 60 mm x 2.25 mm for outer
frames, 66 mm x 42 mm x 2.25 mm for sliding door shutter
frames capable of mounting single glazing system, structurally
reinforced with hot dip galvanized up to 50 microns of minimum
thickness of 1.2 mm prefabricated & welded through fusion
welding the window sash shall be fitted with 5 mm thick clear
float glass of reputed make and mesh shutter shall be made of
48
SS RATE
Sl.
No
20010-11
50 x 26.5 x 2.0 mm uPVC profile section and fitted with
nylon/polymer mesh and rollers/pulley duly fixed with EPDM
weathering seal resistant accessories like clipping locking system
made of aluminium 1 No., per set of sashes and the system is to
be installed at the site using anchor fasteners, silicon rubber
sealant, easy glazing/ deglazing at site etc., including cost and
conveyance of all materials, accessories, labour charges for
transportation, erection at site with templates for casement
sizing complete for finished item of work (Elgi/ Polywood/ Sintex
/ NCL/ Fenesta etc)
sliding doors three track - three glass shutters sliding - 112 -
Series duly manufactured using UPVC reinforced profiles of
112.0 mm x 60 mm x 2.25 mm for outer frames, 66 mm x 42 mm
x 2.25 mm for sliding door shutter frames capable of mounting
single glazing system, structurally reinforced with hot dip
and fixed with EPDM weathering seal resistant accessories like
704 BMT-N.63 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 1 Sqm 7135.00
openable doors with openable shutters - 106-Series duly
manufactured using UPVC reinforced profiles of 60 mm x 56 mm
x 2.25 mm for outer frames, 70 mm x 60 mm x 2.25 mm for
mullion sections as per the need and 106 mm x 60 mm x 2.25
mm for openable shutter frame capable of mounting single
glazing system structurally reinforced with hot dip galvanized up
to 50 microns of minimum thickness of 1.2 mm prefabricated &
welded through fusion welding the window sash shall be fitted
with 5 mm thick clear float glass of reputed make duly fixed with
EPDM weathering seal resistant and accessories for openable
door - hinges of stainless steel grade 304- 3 Nos., per shutter
handle with mazak alloy casting 1 No. per shutter, locking system
suitably concealed 1 No., with raiser wedges for smooth
operation and the system is to be installed at the site using
anchor fasteners, silicon rubber sealant, easy glazing/ deglazing
at site etc., including cost and conveyance of all materials,
accessories, labour charges for transportation, erection at site
with templates for casement sizing complete for finished item of
work (Elgi/ Polywood/ Sintex / NCL/ Fenesta etc)
705 BMT-N.64 Sintex Door shutter, with shutter frame and infill panel made 1 Sqm 925.00
from PVC material confirming to IS: 10151-1982, The shutter
frame made out of PVC Extruded sections having overall
dimension of 47mm x 33mm with wall thickness of 1.2mm +
0.3mm with usual process variation corresponding to the Sintex
code number DWUF 306. The shutter frame is given tapered
49
SS RATE
Sl.
No
20010-11
shape to provide better grip to the infill panel end to drain out
the water The Infill panel is made out of PVC Sections having
Overall Dimensions of 200mmX 20mm with wall thickness of
1mm + 0.2mm with usual process variation corresponding to the
Sintex code number SPUF 101. The shutter frames shall be mitre
cut and joined at the corner. Polymeric “ L” type corners shall be
provided at the corners to take up hardware & fixtures and shall
be fixed with 10-20mm counter sunk fully threaded parallel
shank steel screws. All the hardware locations shall be
reinforced with special polymeric Bars as shown in the drawings.
Stickers showing locations of different Hardware shall be pasted
on the shutter. The infill panels shall be joined by tongue and
groove method, WOODEN AND BP GREY COLOUR.
706 BMT-N.65 Door shutter made out of PVC material confirming to IS: 10151- 1 Sqm 1100.00
1982. The Infill Panel is made out of seamless one piece multi
chamber PVC extruded sections having overall dimensions of
610mm x 20mm with wall thickness of 1mm + 0.2mm with usual
process variation corresponding to the Sintex code number SPUF
128. The top and bottom edges of the shutter to be covered with
end cap of the size 20mm x 11mm with usual process variation
corresponding to Sintex Code Number DWUF 327. The door
shutter to be reinforced with special polymeric reinforcements
as shown in the drawing to take up necessary hardware’s and
fixtures. Stickers indicating the locations of hardware will be
pasted at appropriate places, . WOODEN AND BP GREY COLOUR.
707 BMT-N.66 NCL or Equivalent Metal Door (Scientific Door): Providing & 1 Sqm 7500.00
Fixing of Metal Door frames and door shutters made upof
Galvanize steel (base steel as per IS 513 of 0.58 mm thick D
quality, galvanized as per IS 277 with Zinc of 120 GSM) Pure
polyester powder upto 50-60 microns thick . Outer frame
section should be of 100x 58mm x 1.2mm thick. Shutter section
should be of 0.80 mm thick galvanized steel sheet pressed (roll
formed) to provide a 46mm thick fully flush, double skin door
shell Seam joints at stile edges. In-fill of Honeycomb Kraft paper
is used to give the required rigidity and effective acoustic
insulation. 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10”
Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved
quality – 1 No. The above frames should be fixed to the
concrete/masonry wall by means of self expanding screws
complete for finished item of work. Single leaf Door
708 BMT-N.67 NCL or Equivalent Metal Door (Scientific Door): Providing & 1 Sqm 8000.00
Fixing of Metal Door frames and door shutters made upof
Galvanize steel (base steel as per IS 513 of 0.58 mm thick D
quality, galvanized as per IS 277 with Zinc of 120 GSM) Pure
polyester powder upto 50-60 microns thick . Outer frame
section should be of 100x 58mm x 1.2mm thick. Shutter section
should be of 0.80 mm thick galvanized steel sheet pressed (roll
formed) to provide a 46mm thick fully flush, double skin door
shell Seam joints at stile edges. In-fill of Honeycomb Kraft paper
is used to give the required rigidity and effective acoustic
insulation. 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10”
Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved
quality – 1 No. The above frames should be fixed to the
50
SS RATE
Sl.
No
20010-11
complete for finished item of work. Double leaf Door
709 BMT-N.68 Moulded panel solid core flush doors using water-resistant 1 Sqm 1720.00
hardwood fibre HDF / MDF fibre boards skins of 2.5 mm thick of
Masonite or equivalent doors - 30 mm thick
710 BMT-N.69 Moulded panel solid core flush doors using water-resistant 1 Sqm 1880.00
hardwood fibre HDF / MDF fibre boards skins of 2.5 mm thick
Masonite or equivalent doors - 35 mm thick
711 BMT-N.70 Solid core membrane flush doors using rigid PVC membrane of 1 Sqm 1400.00
0.3 mm thick of different elegant shades doors - 30 mm thick
712 BMT-N.71 Solid core membrane flush doors using rigid PVC membrane of 1 Sqm 1550.00
0.3 mm thick of different elegant shades doors - 35 mm thick
P WINDOWS
BISON LAM ( Pre Laminated Cement Bonded Particle Board)
WINDOWS with Pre-Painted Steel Sections - Supply and fixing of
factory made windows fabricated from pre-painted Cold rolled
formed sections made of galvanized steel color coated sections
(Base steel as per IS-512 D quality, galvanized as per IS-277 with
Zinc of 120 gram/sqm) with total coated thickness of 0.6mm
primer coated with epoxy primer of 5-7 microns thick, finish
painted with polyester paint of 12-16 microns and back coated
with alkyd backer of 5-7 microns), the sections for outer frame
and center mullion (duly filled with PU form of 40 kg/Cum)
should be of 60mm X 50mm, with provision for fixing glazed
shutter. The section for glazed/paneled shutter should be of size
47mm x 20mm and another section of size 60mm x 23 mm
should be provided for separating glazed and paneled portion.
The section are cut to length and miter jointed with plastic
corner brackets. The size of the corner brackets for a window
outer frames 50mm x 60mm. the mullion section is to be fixed to
the frame with plastic mullion cap.SZS 1. Stiffener plates of size
60mmx50mm made of 1.25mm thick CRCA electroplated are to
be provided to fix window frames to concrete/masonry. Gasket
is to be provided for fixing glass. 10mm BISON LAM both sides.
5mm thick color pin headed glass is to be provided for glazing
and providing guard bars of 10mm square rods duly welded at
100mm pitch to MS flat section of size 18mm and 3 mm thick.
Windows are to be fixed to wall by means of self expansion nylon
cap(75) and electroplated wooden screws of size 100mm,
together with the following (Supply and fixing) aluminum
powder coated fittings A) 75mm long grip handles 1 no per
shutter. B) 75mm long tower bolts 2 nos. per shutter. C) Heavy
duty SS pivot hinges 2nos per shutter. D) MS Powder coated
telescopic stay 1 no per shutter.
713 BMT-P.01 BISON LAM (Pre Laminated Cement Bonded Particle Board) 1 Sqm 3800.00
WINDOWS WITH PPS SECTIONS -Single shutter 2’0”x4’0” outer
frame section size of 50mm x60mm shutter frame section size of
47 mm x 20mm and 60mm x23mm section provided for shutter
frame mullion.
WINDOWS WITH PPS SECTIONS - Double shutter 3’0” x4’0” outer
51
SS RATE
Sl.
No
20010-11
47mmx20mm Mullion section size of 50mmx60mm for outer
frame and 60mmx23mm section provided for shutter frame
mullion.
WINDOWS WITH PPS SECTIONS - Double shutter 3’0” x3’0” outer
47mmx20mm Mullion section size of 50mmx60mm for outer
mullion
WINDOWS WITH PPS SECTIONS- Double shutter 4’0” x4’0” outer
47mmx20mm Mullionsection size of 50mmx60mm for outer
mullion
WINDOWS WITH PPS SECTIONS- Center fixed both side open
able shutters 6’0” x4’0” outer frame section size of 50mmx60mm
shutter frame section size of 47mmx20mm, Mullion section size
of 50mmx60mm fixed beading section size of 18mmx25mm, and
60mmx23mm section provided for shutter frame mullion.
718 BMT-P.06 SINTEX OR EQUIVALENT OPENABLE WINDOW Supply and fixing 1 Sqm. 3008.00
of Sintex window shall be made out of extruded PVC section. The
outer frame having overall dimensions of 40 X 48mm with a wall
thickness of 1.5mm with usual process variation of ± 0.3mm. The
shutter frame having with overall dimensions of 26 X 47mm with
wall thickness of 1.2mm ± 0.3mm provided with 5mm glazing.
The centre mullion having over all dimensions of 25 X 32.5mm
±0.3mm, complete, for finished item of work.
719 BMT-P.07 SINTEX OR EQUIVALENT SLIDING 2 TRACK WINDOWS Supply 1 Sqm. 2680.00
and fixing of two tracks or three track sliding window the outer
frame shall be 58 X 45mm with a wall thickness of 1.2mm ±
0.3mm. The sliding shutter frame is made of PVC section 57 X
32mm with overall dimensions of 1.5mm ± 0.3mm provided with
5mm glazing. Roller bearings and arrestor type handle cum lock
shall be provided, complete, for finished item of work.
NCL or Equivalent PRE- PAINTED STEEL, WINDOWS,
VENTILATORS & DOOR FRAMES. Supply and fixing of windows &
top Hung and fixed louvered ventilators made of pre - painted
steel (base steel as per IS 513 of -0.6 mm thick 'D" quality,
galvanized as per IS 277 with zinc of 120 GSM) primer coated
with epoxy primer of 5-7 microns thick, finish painted with a
polyester paint of 12-16 microns thick and back coated with 5-7
microns thick alkyd backer. Section for outer frame should be 46
x 52 mm section for shutter should be 46 x 46 mm section for
mullion should be 46 x 70 mm, and section for beading should be
18 x 25 mm and section for louvered ventilation should be 33
x57mm Box section. The windows should be panelled with 5mm
thick plain float glass & 4 mm pinhead glass for ventilators with
Ethyl propylene Diamine monomer Gasket (EPDM). The sections
are to be cut to length mitre joined with corner brocket centre
mullions are to be fixed using mullion cap. Handle made of high
52
SS RATE
Sl.
No
20010-11
grade aluminium powder coated and nylon receiver. Gaskets
made of Ethyl propylene Diamine monomer (EPDM). Corner
brackets made of CRCA with Zinc Phosphate. Mullion caps made
of glass filled nylon. The above frames should be fixed to the
concrete /masonry wall by means of self expanding screws.
including 10 mm square guard bars with 6" pitch complete for
finished item of work.
720 BMT-P.08 Windows: Single shutter 2'0 x 4'0 (609.6 x 1219.2 mm ) Outer 1 sqm 4668.00
frame section size of 46 x 52 mm shutter frame section size of 46
x 46 mm
721 BMT-P.09 Windows: Double shutter 3'-0" x 4'-0" (914.4mm x 1219.2 mm) 1 Sqm 4668.00
outer frame section size of 46 x 52 mm shutter frame section
size of 46 x 46 mm
722 BMT-P.10 Windows: Double shutter 3'-0" x 4'-0" (914.4mm x 1219.2 mm) 1 Sqm 4948.00
size of 46 x 46 mm Mullion section size of 46 x 70 mm
723 BMT-P.11 Windows: Double shutter 4'-0" x 4 '-0" (1219.2x12.19.2mm) 1 Sqm 4668.00
size of 46 x 46 mm
724 BMT-P.12 Windows: Double shutter 4'-0" x 4 '-0" (1219.2x1219.2mm) 1 Sqm 4948.00
outer frame section size of 46 x 52 mm shutter frame section size
of 46 x 46 mm Mullion section size of 46 x 70 mm
725 BMT-P.13 Windows: Double shutter 4'-6" x 4 '-6" (1371.6x1371.6mm) 1 Sqm 4410.00
of 46 x 46 mm Mullion section size of 46 x 70 mm
726 BMT-P.14 Windows: Centre fixed both side openable shutter 5'-0" x 4'-0" 1 Sqm 4410.00
(1524x1219.2mm) outer frame section size of 46 x 52 mm
shutter frame section size of 46 x 46 mm Mullion section size of
46 x 70 mm fixed beading section size of 18 x 25 mm
729 BMT-P.17 Ventilators: Top Hung 2 '-0" x 2'-0" (609.6x609.6mm) outer 1 Sqm 5114.00
frame section size of 46mm x 52 mm shutter frame section size
of 46mm x 46 mm
frame section size of 46 x 52 m shutter frame section size of 46 x
46 mm Mullion section size of 46 x 70 mm
frame section size of 46 x 52m m shutter frame section size of 46
x 46 mm Mullion section size of 46 x 70 mm
732 BMT-P.20 Ventilators: Fixed louvers 2'-0" x 2'-0" (609.6x609.6mm)(Box 1 Sqm 3510.00
section) outer frame section size of 33 x 57 mm
733 BMT-P.21 Ventilators: Fixed louvers 4'-0" x 2'-0" (1219.2x609.6mm)(Box 1 Sqm 3510.00
section) outer frame section size of 33 x 57 mm Mullion section
size of 33 x 57
734 BMT-P.22 Ventilators: Fixed louvers 4'-0" x 3'-0" (1219.2x914.4mm) (Box 1 Sqm 3510.00
53
SS RATE
Sl.
No
20010-11
section) outer frame section size of 33 x 57 mm Mullion section
size of 33 x 57
NCL or Equivalent ECO 3000 SERIES WINDOWS (SUITABLE FOR
RESIDENTIAL BUILDINGS WITH GRILL PROVISION) Providing and
Fixing of windows made of pre-painted steel (Base steel as per IS
513 of 0.6mm thick galvanized as per IS 277 with Zinc of 120
GSM). Primer coated with epoxy primer of 5-7 microns thick,
finish painted with a polyester paint of 12-16 microns thick and
back coated with 5-7 microns thick alkyd backer. Section for
outer frame should be of 48x50mm, centre mullion should be of
48x50mm, section for shutter should be of 47x20mm and Fixed
glass beading section should be of 12x12mm. Outer frame and
mullions to have rebate for Glazed shutter and a 20mm provision
for Guard bars/Grills. The sections are to be cut to length metre
joined with corner bracket. Centre mullion is to be fixed with
mullion cap. Seccolor Handle, seccolor stay, 2 nos. of Stainless
Steel heavy duty Pivot hinges shall be provided per shutter. The
windows should be panelled with 5mm thick plain float glass.
Rubber Gaskets are provided all around the glass. The above
frames should be fixed to the concrete/masonry wall by means
of self expanding screws, Including 10mm Square guard bars
with 6” (152.4mm) pitch etc., complete for finished item of work.
735 BMT-P.23 Single shutter Window 2’0”x4’0” (609.6mm x 1219.2mm). Outer 1 Sqm 4298.00
frame section size of 48x50mm shutter frame section size of
47x20mm.
736 BMT-P.24 Double shutter Window with vertical mullion 3’0” x 4’0” ( 1 Sqm 4577.00
914.4mm x 1219.2mm) outer frame section size of 48x50mm
shutter frame section size of 47x20mm. Mullion section size of
48x50mm.
737 BMT-P.25 Double shutter Window with vertical member4’0” x 4’0” 1 Sqm 4577.00
(1219.2mm x 1219.2mm) outer frame section size of 48x50mm
shutter frame section size of 47x20mm and mullion section
should be of 48x50mm.
738 BMT-P.26 Centre fixed both side openable shutter window 5’0”x4’0” 1 Sqm 4038.00
(1524mm x1219.2mm). Outer frame section size of 48x50mm.
Shutter frame section size of 47x20mm. Mullion section size of
48x50mm. Fixed beading section size of 12x12mm.
(1828.8mm x1219.2mm). Outer frame section size of 48x50mm.
NCL or Equivalent ECO 4000 SERIES WINDOWS (SUITABLE FOR
RESIDENTIAL BUILDINGS WITH GRILL & FLYMESH PROVISION)
Providing & Fixing of windows made of pre-painted steel (Base
Steel as per IS 513 of 0.6mm thick galvanized as per IS 277 with
zinc of 150 GSM). Primer coated with epoxy primer of 5-7
microns thick, finish painted with a polyester paint of 12-16
microns thick and back coated with 5-7 microns thick alkyd
backer. Section for outer frame should be of 72x55mm, centre
mullion should be of 72x50mm, Section for fixed glass beading
section should be of 12x12mm and section for shutters should be
of 47x20mm. Outer frame & mullion sections to have rebate for
54
SS RATE
Sl.
No
20010-11
glazed shutters, fly mesh and a 20mm provision for guard
bars/grills. Fly mesh shutter section should be of 20x40mm. The
sections are to be cut to length metre joined with corner bracket.
Centre mullions are to be fixed with mullion cap, seccolor stay,
and seccolor handles, seccolor latch 2 Nos of heavy duty stainless
steel pivot hinges shall be provided per Shutter. The windows
should be panelled with 5mm thick plain float glass and S.S.
Mesh for fly mesh shutter (304 grade). Rubber Gaskets are
provided all around the glass. The above frames should be fixed
to the concrete/masonry wall by means of self expanding screws.
Including 10mm Square guard bars with 6” (152.4mm) pitch ,
complete for finished item of work
740 BMT-P.28 Single shutter Window 2’0”x4’0” (609.6mm x 1219.2mm). Outer 1 Sqm 5706.00
47x20mm.
741 BMT-P.29 Double shutter Window with vertical mullion 3’0” x 4’0” ( 1 Sqm 5984.00
914.4mm x 1219.2mm) outer frame section size of 72x50mm
72x50mm.
742 BMT-P.30 Double shutter Window with vertical member4’0” x 4’0” 1 Sqm 5984.00
(1524mm x1219.2mm). Outer frame section size of 72x50mm.
(1828.8mm x1219.2mm). Outer frame section size of 72x50mm.
745 BMT-P.33 NCL or Equivalent Sliding Windows Providing and Fixing Sliding 1 sqm 4948.00
Window fabricated from Roll formed sections made of
galvanized Steel colour coated/powder coated (Base Steel as per
IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120
GM/Sq.mtr) with total coated thickness of 0.60mm. Primer coat
with epoxy primer of 5-7 microns thick, finish painted with a
polyester paint of 12-16 microns thick and back coated with
Alkyd backer of 5-7 microns or powder coated with pure
polyester powder up to 50-60 microns thick. Section for external
frame bottom should be of 79x44mm, external frame sides and
top should be of 69x24mm, guide for top and bottom should be
of 69x26mm (Stainless Steel). Section for shutter should be of
26x30mm. The windows should be panelled with 5mm thick
plain float glass. Corner bracket for internal and external frame
made of glass filled nylon. Gaskets are to be made of Ethyl
Propylene Diamine Monomer (EPDM).The sections are to be cut
to length, joined and assembled by means of corner bracket. The
above frames should be fixed to the concrete/masonry walls by
means of self expanding brackets & screws including 10mm
square guard bars with 6” pitch (152.4mm) and all Taxes
55
SS RATE
Sl.
No
20010-11
ELIXIR SUPER SERIES OR EQUIVALENT PRE – PAINTED STEEL
WINDOWS / VENTILATORS & DOOR FRAMES Supply and fixing
of windows & top hung and fixed louvered Ventilators made of
pre – painted steel (base steel as per IS 513 of -0.6 mm thick ‘D”
quality, galvanized as per IS 277 with zinc of 120 GSM) primer
coated with epoxy primer of 5-7 microns thick, finish painted
with a polyester paint, of 12-16 microns thick and back coated
with 5-7 microns thick alkyd backer. Section for outer frame
should be 46 x 52 mm, section for shutter should be 46 x 46 mm,
section for mullion should be 46x70 mm, and section for
beading should be 18x25 mm and section for louvered ventilator
should be 33x57 mm Box section. The windows should be
panelled with 5 mm thick plain float glass & 4 mm pinhead glass
for ventilators with Ethyl propylene Diamine monomer Gasket
(EPDM). The sections are to be cut to length, mitre joined with
corner bracket and centre mullions are to be fixed using mullion
cap. Handle made of high grade aluminium powder coated and
nylon receiver. Gaskets made of Ethyl propylene Diamine
monomer (EPDM). Corner brackets made of CRCA with Zinc
phosphate. Mullion caps made of glass filled nylon. The above
frames should be fixed to the concrete / masonry wall by means
of self expanding screws. Including 10 mm square bars with 6”
pitch complete finished item of work including all taxes.
746 BMT-P.34 WINDOWS Single shutter 2’0x4’0(609.6x1219.2 mm) Outer 1 Sqm 4535.00
frame section size of46x52 mm shutter frame section size of
46x46mm
747 BMT-P.35 WINDOWS Double shutter 3’- 0” X 4’ – 0” (914.4MM X 1 Sqm 4535.00
1219.2MM) outer frame section size of 46x52 mm shutter frame
section size of 46x46 mm
748 BMT-P.36 WINDOWS Double shutter 3’- 0” x 4’- 0” (914.4mm x 1219.2 1 Sqm 4806.00
mm) outer frame section size of 46 x 52 mm shutter frame
section size of 46x46 mm mullion section size of 46 x 70 mm
749 BMT-P.37 WINDOWS Double shutter 4’ – 0” x 4’ – 0” (1219.2x12.19.2mm) 1 Sqm 4677.00
of 46 x 46 mm
750 BMT-P.38 WINDOWS Double shutter 4’-0” x 4’-0” (1219.2x1219.2mm) 1 Sqm 4535.00
of 46 x 46 mm mullion section size of 46 x 70mm
751 BMT-P.39 WINDOWS Double shutter 4’-6” x 4’-6” (1371.6 x 1371.6mm) 1 Sqm 4284.00
of 46 x 46mm Mullion section size of 46 x 70 mm
752 BMT-P.40 WINDOWS Centre fixed both side openable shutter 5’-0” x 4’- 1 Sqm 4284.00
0”(1524x1219.2mm) outer frame section size of 46x52 mm
shutter frame section size of 46 x 46 mm mullion section size of
46 x 70 mm fixed beading section size of 18 x 25mm
753 BMT-P.41 WINDOWS Centre fixed both side openable shutter 6’-0” x 4’-0” 1 Sqm 4284.00
(1828.8 x 1219.2 mm) outer frame section size of 46 x 52 mm
754 BMT-P.42 WINDOWS Centre fixed both side openable shutter 6’-0” x 4’-6” 1 Sqm 4284.00
(1828.8 x 1371.6 mm) outer frame section size of 46 x 52 mm
56
SS RATE
Sl.
No
20010-11
755 BMT-P.43 Ventilators : Top hung 2’ – 0” x 2’ -0” (609.6 x 609.6mm) outer 1 Sqm 4992.00
frame section size of 46 mm x 52mm shutter frame section size
of 46mm x 46mm
756 BMT-P.44 Ventilators : Top hung 4’-0” x 2’-0” (1219.2 x 609.6mm) outer 1 Sqm 4992.00
frame section size of 46 x 52 m shutter frame section size of
46x46mm mullion section size of 46 70 mm
757 BMT-P.45 Ventilators : Top hung 4’-0” x 3’=0” ( 1219.2 x 914.4mm) outer 1 Sqm 4992.00
frame section size of 46 x 52 mm shutter frame section size of 46
x 46 mm mullion section size of 46 x 70mm
758 BMT-P.46 Ventilators : Fixed louvers 2’-0” x 2’-0”(609.6x 609.6mm)(Box 1 Sqm 3417.00
section) outer frame section size of 33x57mm
759 BMT-P.47 Ventilators : Fixed louvers 4’-0” x 2’-0” (1219.2 x 609.6mm) ) 1Sqm 3417.00
(Box section) outer frame section size of 33x57mm mullion
section size of 33 x 57
760 BMT-P.48 Ventilators : Fixed lovers 4’-0” x 3’-0” (1219.2 x 914.4 mm) (Box 1 Sqm 3417.00
section) outer frame section size of 33 x 57 mm mullion section
size of 33 x 57
ELIXIR E 1000 SERIES OR EQIVALENT WINDOWS (SUITABLE FOR
RESIDENTIAL BUILDINGS WITH GRILL PROVISION) Providing and
fixing of windows made of pre-painted steel (base steel as per IS
513 of 0.6mm thick galvanized as per IS 277 with zinc of 120
48x50mm, section for shutter should be of 47x20mm and fixed
glass beading section should be of 12x12mm. Outer frame and
mullions to have rebate for glazed shutter and a 20mm provision
for guard bars/grills. The sections are to be cut to length meter
joined with corner bracket. Centre mullion is to be fixed with
mullion cap. Handle, 2 nos of stainless steel heavy duty pivot
hinges shall be provided for shutter. The window should be
panelled with 5mm thick plain float glass. Rubber gaskets are
provided all around the glass. The above frames should be fixed
to the concrete/masonry wall by means of self expanding screws,
including 10mm square guard bars with 6” (152.4 mm) pitch etc.,
complete for finished item of work including of all taxes.
761 BMT-P.49 Single shutter window 2’0”x4’0” (609.6mm x 1219.2mm).outer 1 Sqm 4154.00
47x20mm.
762 BMT-P.50 Double shutter window with vertical mullion 3’0” x 4’0” 1 Sqm 4424.00
shutter frame section size of 47x20mm. mullion section size of
48x50mm
763 BMT-P.51 Double shutter window with vertical member 4’0” x 4’0” 1 Sqm 4424.00
should be of 48x50mm
(1524mm x 1219.2mm). Outer frame section size of 48x50mm.
57
SS RATE
Sl.
No
20010-11
(1828.8mm x 1219.2mm). Outer frame section size of 48x50mm.
ELIXIR E-2000 SERIES, OR EQUIVALENT WINDOWS (SUITABLE
FOR RESIDENTIAL BUILDINGS WITH GRILL & FLYMESH
PROVISION) Providing & fixing of windows made of pre-painted
steel (Base steel as per IS 513 of 0.6mm thick galvanized as per IS
277 with zinc of 150 GSM). Primer coated with epoxy primer of
5-7 microns thick, finish painted with a polyester paint of 12-16
microns thick and back coated with 5-7 microns thick alkyd
backer. Section for outer frame should be of 72x55mm, centre
mullion should be of 72x50mm, section for fixed glass beading
should be of 12x12mm and section for shutter should be of
47x20mm. Outer frame & mullion sections to have rebate for
glazed shutters, fly mesh and 20 mm provision for guard bars/
grills fly mesh shutter section should be of 20x40mm. The
sections are to be cut to length m1 Sqm joined with corner
bracket. Centre mullions to be fixed with mullion cap. Elixir or
equivalent stay, handles latch 2nos of heavy duty stain less steel
pivot hinges shall be provided per shutter. The windows should
be panelled with 5 mm thick plain float glass and S.S. Mesh for fly
mesh shutter (304 grade). Rubber Gaskets are provided all
around the glass. The above frames should be fixed to the
concrete/masonry wall by means of self expanding screws.
Including 10mm square guard bars with 6” (152.4mm) pitch,
complete for finished item of work including of all taxes.
766 BMT-P.54 Single shutter window 2’0”x4’0” (609.6mm x 1219.2mm). Outer 1 Sqm 5515.00
47x20mm.
72x50mm.
769 BMT-P.57 Centre fixed both side openable shutter window 1 Sqm 5265.00
5’0”x4’0”(1524mm x 1219.2mm).outer frame section size of
72x50mm. Shutter frame section size of 47x20mm and mullion
section size of 72x50mm. Fixed beading section size of
12x12mm.
770 BMT-P.58 Centre fixed both side openable shutter window 6’0” x 4’0” 1 Sqm 5265.00
(1828.8mm x 1219.2mm). Outer frame section size of
72x50mm.shutter frame section size of 72 x 50mm. Fixed
beading section size of 12x12mm.
771 BMT-P.59 Supply & fixing of fly mesh shutters of size 20x40mm fly proof 1 Sqm 1037.00
mesh with std. Spn (S.S) fly mesh including cost and conveyance
of all materials, and labour charges etc. Complete for finished
item of work including of all taxes. : Single shutter 2’-0” x 4’-0” (
58
SS RATE
Sl.
No
20010-11
609.6 x 1219.2mm) Shutter section size 20 x 40mm
item of work including of all taxes. Double shutter 3’-0” x 4’-0”
(914.4 x 1219.2mm) shutter section size 20 x 40mm
item of work including of all taxes. Double shutter 4’-0” x 4’-0”
(1219.2 x 1219.2mm) shutter section size 20 x 40mm
774 BMT-P.62 Supply & fixing of fly mesh shutters of size 20 x 40 mm fly proof 1 Sqm 894.00
work including of all taxes. Single shutter 2’-0” x 4’-0” (609.6 x
1219.2mm) shutter section size 20 x 40mm
work including of all taxes. Double shutter 3’-0” x 4’= 0” ( 914.4 x
1219.2mm) shutter section size 20 x 40 mm
work including of all taxes. Double shutter 4’-0” x 4’-0” (1219.2 x
1219.2 mm) shutter section size 20 x 40 mm
777 BMT-P.65 ELIXIR or Equivalent Supply and fixing fly mesh window with 1 Sqm 3678.00
sections made of pre painted steel (Base steel as per IS 513 of ‘D’
quality, Galvanized as per IS 277 with zink of 120 GSM). Primer
with a polyester paint of 12 to 16 microns thick and back coated
with 5-7 microns thick alkyd baker with total coated thick ness of
0.6 mm for shutter frame and 0.8 for outer frame. Section for
outer frame should be of 30x30mm and fly mesh shutter section
should be of 20x40mm outer frame sections to have rebate for
fly mesh shutters. The sections are to be cut to lengh metre
jointed with corner bracket. Aluminum ‘T’ section of double
shutter & above. The mesh is of ss for fly mesh shutter (304
grade) and EPD gasket is provided for fixing up the fly mesh. The
above frames should be fixed to the concrete/ masonry wall by
means of left expending screws. Elixir latch, 2 nos of heavy duty
GI pivot hinges shall be provided per shutter (304 grade). All
taxes complete for finished item of work.
778 BMT-P.66 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 1 Sqm 5424.00
sliding windows two track sliding - 62-Series duly manufactured
using UPVC reinforced profiles of 62 mm x 60 mm x 2.25 mm for
outer frames, 66 mm x 38 mm x 2.25 mm for sliding shutter
frames capable of mounting single glazing system, structurally
reinforced with hot dip galvanized up to 50 microns of minimum
thickness of 1.2 mm prefabricated & welded through fusion
welding the window sash shall be fitted with 5 mm thick clear
float glass of reputed make duly fixed with EPDM weathering
59
SS RATE
Sl.
No
20010-11
seal resistant accessories like clipping locking system made of
aluminium 1 No., per set of sashes and the system is to be
installed at the site using anchor fasteners, silicon rubber
sealant, easy glazing/ deglazing at site etc., including cost and
sizing complete for finished item of work (Elgi/Polywood/
Sintex/NCL/Fenesta etc)
sliding windows three track - only two glass shutters sliding - 80-
Series duly manufactured using UPVC reinforced profiles of 80
mm x 52 mm x 2.25 mm for outer frames, 54 mm x 38 mm x 2.25
mm for sliding shutter frames capable of mounting single glazing
system, structurally reinforced with hot dip galvanized up to 50
microns of minimum thickness of 1.2 mm prefabricated &
welded through fusion welding the window sash shall be fitted
with 5 mm thick clear float glass of reputed make duly fixed with
EPDM weathering seal resistant accessories like clipping locking
system made of aluminium 1 No., per set of sashes and the
system is to be installed at the site using anchor fasteners, silicon
rubber sealant, easy glazing/ deglazing at site etc., including cost
and conveyance of all materials, accessories, labour charges for
sizing complete for finished item of work (Elgi/ Polywood/ Sintex
/ NCL/ Fenesta etc)
sliding windows three track - two glass shutters sliding and one
mesh shutter - 80-Series duly manufactured using UPVC
reinforced profiles of 80 mm x 52 mm x 2.25 mm for outer
frames, 54 mm x 38 mm x 2.25 mm for sliding shutter frames
capable of mounting single glazing system structurally reinforced
with hot dip galvanized up to 50 microns of minimum thickness
of 1.2 mm prefabricated & welded through fusion welding the
window sash shall be fitted with 5 mm thick clear float glass of
reputed make and mesh shutter frame shall be 52 mm x 21.5
mm x 2 mm fitted with nylon/ polymer mesh on rollers/ pulley
duly fixed with EPDM weathering seal resistant accessories like
casement windows openable shutters - 48-Series duly
mullion sections for two or more openable shutters and 78 mm x
60 mm x 2.25 mm for outward openable shutter frame or 70 mm
x 60 mm x 2.25 mm for inward openable shutter frame capable
of mounting single glazing system structurally reinforced with
hot dip galvanized up to 50 microns of minimum thickness of 1.2
60
SS RATE
Sl.
No
20010-11
mm prefabricated & welded through fusion welding the window
sash shall be fitted with 5 mm thick clear float glass of reputed
make duly fixed with EPDM weathering seal resistant
accessories for casement window - friction stay hinges of
stainless steel grade 304- 2 Nos., per sash, handle with mazak
alloy casting 1 No. per sash, multipoint locking system suitably
concealed 1 No., per sash provided with raiser wedges for
smooth operation and the system is to be installed at the site
using anchor fasteners, silicon rubber sealant, easy glazing/
deglazing at site etc., including cost and conveyance of all
materials, accessories, labour charges for transportation,
erection at site with templates for casement sizing complete for
finished item of work (Elgi/ Polywood/ Sintex / NCL/ Fenesta etc)
casement windows openable shutters - 60 -Series duly
mullion sections for two or more openable shutters 70 mm x 60
mm x 2.25 mm for openable shutter frame capable of mounting
single glazing system structurally reinforced with hot dip
duly fixed with EPDM weathering seal resistant and accessories
for casement window - friction stay hinges of stainless steel
grade 304- 2 Nos., per sash, handle with mazak alloy casting 1
No. per sash, multipoint locking system suitably concealed 1 No.,
per sash provided with raiser wedges for smooth operation and
the system is to be installed at the site using anchor fasteners,
silicon rubber sealant, easy glazing/ deglazing at site etc.,
including cost and conveyance of all materials, accessories,
783 BMT-P.71 DELETED 1 Sqm
784 BMT-P.72 DELETED 1 Sqm
785 BMT-P.73 Galvanized powder coated Casement Windows of ROSHINI make 1 Sqm 4334.00
with openable shutters duly manufactured using pressed steel
sections in mild steel conforming to IS 513 of having 1.0 mm
thick and galvanized as per IS 277 of 120 GSM surface treatment
with pure polyester powder coating of 30-40 microns thick and
section for outer frame of 60x50mm, centre for mullion of
62x50mm, section for shutter of 52 x 22 mm, outer frame and
mullions to have one side rebate for glazed shutter of size 24 mm
and 10x10 mm square guard bars provided at 125 mm c/c the
sections assembled with bolt & nut assembly with zinc-
electroplated M-5 bolts, GI Handle of size 80 mm x 15 mm -1 No
per shutter, 2 nos of stainless steel heavy duty pivot hinges of
size 3" of SS 304 Grade per shutter, window panes with 5 mm
thick plain float glass and fixed with glass beading section of
10x12 mm size with 0.8 mm thick powder coated aluminum 'U'
channel and window frames fixing to the concrete/masonry wall
arrangement with self expanding screws, complete for finished
61
SS RATE
Sl.
No
20010-11
item of work including of all taxes - 1220 x 1372 or below size
section for outer frame of 60x50mm, centre for mullion of
62x50mm, section for shutter of 52 x 22 mm, outer frame and
mullions to have one side rebate for glazed shutter of size 24 mm
and 10x10 mm square guard bars provided at 125 mm c/c the
sections assembled with bolt & nut assembly with zinc-
electroplated M-5 bolts, GI Handle of size 80 mm x 15 mm -1 No
per shutter, 2 nos of stainless steel heavy duty pivot hinges of
size 3" of SS 304 Grade per shutter, window panes with 5 mm
thick plain float glass and fixed with glass beading section of
10x12 mm size with 0.8 mm thick powder coated aluminum 'U'
channel and window frames fixing to the concrete/masonry wall
arrangement with self expanding screws, complete for finished
item of work including of all taxes - 1530 x 1372 or above size
section for outer frame of 88x50mm, centre for mullion of 62x88
mm, section for glass and fly-proof mesh shutter of 52 x 22 mm,
outer frame and mullions to have two sides rebate for glazed
shutter of size 24 mm and 10x10 mm square guard bars provided
at 125 mm c/c the sections assembled with bolt & nut assembly
with zinc-electroplated M-5 bolts, GI Handle of size 80 mm x 15
mm -1 No per shutter, 2 Nos of stainless steel heavy duty pivot
hinges of size 3" of SS 304 Grade per shutter, window panes with
5 mm thick plain float glass and fixed with glass beading section
of 10x12 mm size with 0.8 mm thick powder coated aluminum
'U' channel and fly-proof mesh of SS 304 grade fixed with 18 mm
x 12 mm BT wood beading and window frames fixing
arrangement to the concrete/masonry wall with self expanding
screws, complete for finished item of work including of all taxes -
1220 x 1372 or below size
section for outer frame of 88x50mm, centre for mullion of 62x88
mm, section for glass and fly-proof mesh shutter of 52 x 22 mm,
outer frame and mullions to have two sides rebate for glazed
shutter of size 24 mm and 10x10 mm square guard bars provided
at 125 mm c/c the sections assembled with bolt & nut assembly
with zinc-electroplated M-5 bolts, GI Handle of size 80 mm x 15
mm -1 No per shutter, 2 Nos of stainless steel heavy duty pivot
hinges of size 3" of SS 304 Grade per shutter, window panes with
5 mm thick plain float glass and fixed with glass beading section
62
SS RATE
Sl.
No
20010-11
of 10x12 mm size with 0.8 mm thick powder coated aluminum
'U' channel and fly-proof mesh of SS 304 grade fixed with 18 mm
x 12 mm BT wood beading and window frames fixing
arrangement to the concrete/masonry wall with self expanding
screws, complete for finished item of work including of all taxes -
1530 x 1372 or above size
789 BMT-P.77 NCL or Equivalent only Mesh Window: Providing & Fixing of 1 Sqm 3650.00
Mesh windows made of pre-painted steel (Base Steel as per IS
513 of 0.58mm thick galvanized as per IS 277 with zinc of 120
60x36mm, section mesh beading should be 18x6mm and Fly
mesh shutter section should be of 20x40mm. The sections are to
be cut to length meter joined with corner bracket. Centre
mullions are to be fixed with mullion cap, seccolor handles,
seccolor latch, 2 Nos of heavy duty stainless steel pivot hinges
shall be provided per Shutter. S.S. Mesh for fly mesh shutter (304
grade). The above frames should be fixed to the
Q STRUCTURAL GLAZING
790 BMT-Q.01 ELIXIR or Equivalent Structural Glazing: Providing and Fixing 1 Sqm 5253.00
Structural Glazing fabricated from Roll formed sections made of
Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’
quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with
total coated thickness of 0.72mm. The glass holding section
made of 304 grade stainless steel of 0.6mm thick as per the
design requirement & calculations as given in IS: 875. Primer coat
with epoxy primer of 5 – 7 microns thick, finish painted with a
polyester paint of 12-16 microns thick and back coated with
polyester powder up to 50-60 microns thick. The vertical section
should be of 50mm x100mm x 0.72mm, 33mm x 58mm x
0.72mm for frame horizontal section, stiffener section should be
48mm x 98mm x 1mm, cover profiles sections should be of
20mm x 58mm x 0.58mm, Glass holding section should be of
37mm x 37mm & 37mm x 18mm. Including 5mm thick Ocean
Blue reflective glass. Brackets made of CRCA powder
coated/Electroplated should be used to connect vertical to
horizontal, vertical to slab, to fix verticals at top & bottom as per
site requirement. Gasket made of Ethyl Propylene Diamine
Monomer. Natural cure, with Good U.V. Resistance Silicon to be
used. Wall fixing of sections to concrete/masonry wall should be
with self-expanding cap & screws. The rate is inclusive of cost
and conveyance of all materials to site, all labour charges,
incidental charges, cost of all consumables etc. and scaffolding
charges, form work etc. complete for finished item of work.
791 BMT-Q.02 ELIXIR or Equivalent Top Hung in Structural Glazing: Providing 1 Sqm 4246.00
and Fixing Top Hung shutters in Structural Glazing fabricated
from Roll formed sections made of Pre-painted Steel / Powder
coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per
63
SS RATE
Sl.
No
20010-11
IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of
0.72mm. The glass holding section made of 304 grade stainless
steel of 0.6mm thick. Galvanized steel sections are to be used as
stiffeners inside the colour coated steel/powder coated sections
as per the design requirement. Design calculations are made to
suit wind pressures as given in IS 875. Primer coat with epoxy
primer of 5-7 microns thick and back coated with Alkyd backer of
5-7 microns or powder coated with pure polyester powder up to
50-60 microns thick. The outer frame should be of 20mm x
58mm x 0.6mm, Shutter section should be of 58mm x 33mm x
0.72 mm, stiffener section should be 56mm x 31mm x 1mm.
EARL Bihari Hinges – 2 Nos for each shutter and Aluminium Stays
– 2 Nos. for each shutter, Aluminium Handle – 1 no. for each
shutter. The rate is inclusive of cost and conveyance of all
materials to site, all labour charges, incidental charges, cost of all
consumables etc. and scaffolding charges, form work etc.
792 BMT-Q.03 ELIXIR or Equivalent Supply and fixing of curtain Glazing made of
pre painted steel (base steel as per IS 513 of 0.6 mm thick D
quality, galvanized as per IS 277 with Zinc of 120 GSM) Primer
with a polyester paint of 12- 16 microns thick and back coated
with 5-7 microns thick alkyd backer. Section for outer frame
should be 46 x 52 mm, section for mullion should be 46 x 70 mm
and section for beading should be 18 x 25 mm. The Glazing
should be panelled with 5 mm thick plain float Glass with Ethyl
Propylene diameine Monomer (EPDM) Gaskets. The sections are
to be cut to length, mitre joined with corner bracket. Centre
mullions are to be fixed suing mullion cap. Handle made of high
grade Aluminium powder coated and nylon receiver. Gaskets
made of Ethyl propylene Diamine Monomer (EPDM) Corner
brackets made of CRCA with zinc phosphating. Mullion caps
made of Glass filled nylon. The above frames should be fixed to
the concrete / masonry wall be means of self expanding screws.
& complete for finished item.- Fixed Glazing 2'-0" x 2'-0"
(609.6x609.6mm) grid outer frames section size of 46 x 52 mm
793 BMT-Q.04 Mullion section size of 46 x 70mm Beading section size of 18 x 25 1 Sqm 4316.00
mm - Fixed Glazing 2'-0" x 3'-0" (609.6x914.4mm) grid outer
mm Fixed Glazing 3'-0" x 3'-0" (914.4x914.4mm) grid outer frame
section size of 46 x 52 mm
mm Fixed Glazing 3'-0" x 4'-0" (914.4x1219.2mm) grid outer
796 BMT-Q.07 NCL or Equivalent Structural Glazing: Providing and Fixing 1 sqm 5253.00
Structural Glazing fabricated from Roll formed sections made of
Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’
quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with
total coated thickness of 0.72mm. The glass holding section
made of 304 grade stainless steel of 0.6mm thick as per the
design requirement & calculations as given in IS: 875. Primer
64
SS RATE
Sl.
No
20010-11
coat with epoxy primer of 5 – 7 microns thick, finish painted with
a polyester paint of 12-16 microns thick and back coated with
polyester powder up to 50-60 microns thick. The vertical section
should be of 50mm x100mm x 0.72mm, 33mm x 58mm x
0.72mm for frame horizontal section, stiffener section should be
48mm x 98mm x 1mm, cover profiles sections should be of
20mm x 58mm x 0.58mm, Glass holding section should be of
37mm x 37mm & 37mm x 18mm. Including 5mm thick Ocean
Blue reflective glass. Brackets made of CRCA powder
coated/Electroplated should be used to connect vertical to
horizontal, vertical to slab, to fix verticals at top & bottom as per
site requirement. Gasket made of Ethyl Propylene Diamine
Monomer. Natural cure, with Good U.V. Resistance Silicon to be
used. Wall fixing of sections to concrete/masonry wall should be
with self-expanding cap & screws. The rate is inclusive of cost
and conveyance of all materials to site, all labour charges,
incidental charges, cost of all consumables etc. and scaffolding
charges, form work etc. complete for finished item of work.
797 BMT-Q.08 NCL or Equivalent Top Hung in Structural Glazing: Providing and 1 sqm 4226.00
Fixing Top Hung shutters in Structural Glazing fabricated from
Roll formed sections made of Pre-painted Steel / Powder coated
(Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277
with Zinc of 120 Gm/Sqm) with total coated thickness of
0.72mm. The glass holding section made of 304 grade stainless
steel of 0.6mm thick. Galvanized steel sections are to be used as
stiffeners inside the colour coated steel/powder coated sections
as per the design requirement. Design calculations are made to
suit wind pressures as given in IS 875. Primer coat with epoxy
primer of 5-7 microns thick and back coated with Alkyd backer of
5-7 microns or powder coated with pure polyester powder up to
50-60 microns thick. The outer frame should be of 20mm x
58mm x 0.6mm, Shutter section should be of 58mm x 33mm x
0.72 mm, stiffener section should be 56mm x 31mm x 1mm.
EARL Bihari Hinges – 2 Nos for each shutter and Aluminium Stays
– 2 Nos. for each shutter, Aluminium Handle – 1 no. for each
shutter. The rate is inclusive of cost and conveyance of all
materials to site, all labour charges, incidental charges, cost of all
consumables etc. and scaffolding charges, form work etc.
798 BMT-Q.09 Supply and fixing of curtain Glazing made of pre painted steel 1 Sqm 4317.00
(base steel as per IS 513 of 0.6 mm thick D quality, galvanized as
per IS 277 with Zinc of 120 GSM) Primer coated with epoxy
primer of 5-7 microns thick, finish painted with a polyester paint
of 12- 16 microns thick and back coated with 5-7 microns thick
alkyd backer. Section for outer frame should be 46 x 52 mm,
section for mullion should be 46 x 70 mm and section for
beading should be 18 x 25 mm. The Glazing should be panelled
with 5 mm thick plain float Glass with Ethyl Propylene diameine
Monomer (EPDM) Gaskets. The sections are to be cut to length,
mitre joined with corner bracket. Centre mullions are to be fixed
suing mullion cap. Handle made of high grade Aluminium
powder coated and nylon receiver. Gaskets made of Ethyl
65
SS RATE
Sl.
No
20010-11
propylene Diamine Monomer (EPDM) Corner brackets made of
CRCA with zinc phosphating. Mullion caps made of Glass filled
nylon. The above frames should be fixed to the concrete /
masonry wall be means of self expanding screws. & complete for
finished item.- Fixed Glazing 2'-0" x 2'-0" (609.6x609.6mm) grid
outer frames section size of 46 x 52 mm
799 BMT-Q.10 Mullion section size of 46 x 70mm Beading section size of 18 x 1 sqm 4317.00
25 mm - Fixed Glazing 2'-0" x 3'-0" (609.6x914.4mm) grid outer
25 mm Fixed Glazing 3'-0" x 3'-0" (914.4x914.4mm) grid outer
25 mm Fixed Glazing 3'-0" x 4'-0" (914.4x1219.2mm) grid outer
802 BMT-Q.13 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 6150.00
Curtain Walling systems duly manufactured using UPVC
reinforced profiles of 60 mm x 56 mm x 2.5 mm for outer frames,
60 mm x 70 mm x 2.5 mm for casement shutter frames and the
mullion sections are of 60 mm x 70 mm x 2.5 mm or 60 mm x 62
mm x 2.5 mm for sliding shutter outer frames and 77 mm x 38
mm x 2.5 mm for sliding shutter frames structurally reinforced
with hot dip galvanized up to 50 microns of minimum thickness
of 1 mm the sash shall be fitted with 5 mm thick clear float glass
of reputed make duly fixed with EPDM weathering seal resistant
and accessories for casement window - friction stay hinges of
stainless steel grade 304- 2 Nos., per sash, handle with mazak
alloy casting 1 No. per sash, multipoint locking system suitably
concealed 1 No., per sash provided with raiser wedges for
smooth operation for sliding window - clipping locking system 1
No. made of aluminium including cost and conveyance of all
materials, accessories, labour charges for transportation,
erection at site with templates for casement sizing complete for
finished item of work (Elgi/Polywood/Sintex/NCL/Fenesta etc)
803 BMT-Q.14 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 1 Sqm 2887.00
Fixed Glazing - 48 series duly manufactured using UPVC
frames and the mullion sections are of 60 mm x 76 mm x 2.25
mm frames are structurally reinforced with hot dip galvanized up
to 50 microns of minimum thickness of 1.2 mm the sash shall be
fitted with 5 mm thick clear float glass of reputed make duly
fixed with EPDM weathering seal resistant including cost and
Sintex/NCL/Fenesta etc - up to 6'-0" 6'-0" opening sizes)
804 BMT-Q.15 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 1 Sqm 3450.00
Fixed Glazing - 56 series duly manufactured using UPVC
frames and the mullion sections are of 60 mm x 70 mm x 2.25
mm frames are structurally reinforced with hot dip galvanized up
to 50 microns of minimum thickness of 1.2 mm the sash shall be
66
SS RATE
Sl.
No
20010-11
fitted with 5 mm thick clear float glass of reputed make duly
fixed with EPDM weathering seal resistant including cost and
Sintex/NCL/Fenesta etc - up to 6'-0" 6'-0" opening sizes)
R A. DISMANTLING clearing away and carefully stacking materials
useful for reuse.
805 BMT-R.01 Stone masonry in cement mortar 1 Cum 239.00
806 BMT-R.02 Terracing work in roofs or floors 10 Sqm 99.00
807 BMT-R.03 Flat stones in roof or floors including lifting 10 Sqm 83.00
808 BMT-R.04 Pan tiled or Mangalore tiled roof without roof timbers. 10 Sqm 75.00
809 BMT-R.05 Flat and pan tiles or Mangalore tiles over flat tiles without roof 10 Sqm 83.00
timbers
810 BMT-R.06 Wrought and framed timber in roofs or floors 1 Cum 125.00
811 BMT-R.07 Old lime mortar plaster 10 Sqm 26.00
812 BMT-R.08 Old cement mortar plaster 10 Sqm 29.00
813 BMT-R.09 Dry rough stone revetment for aprons and stacking within 40 M 1 Cum 40.00
lead
814 BMT-R.10 Revetment for aprons and stacking grouted within 40 lead 1 Cum 29.00
815 BMT-R.11 Kadapa slabs or Shahabad stone slabs flooring on sand bed 10 Sqm 42.00
816 BMT-R.12 Through scraping of old plastered surface 10 Sqm 26.00
817 BMT-R.13 Washing of plastered surface with soap, soda and water (or with 10 Sqm 9.00
soda lime and water)
818 BMT-R.14 clean removal of lime plaster from walls and raking out joints 10 Sqm 27.00
20mm deep or from terraced roof and raking out joints 100 mm
deep
819 BMT-R.15 Clean removal of cement plaster from walls and raking out joint 10 Sqm 28.00
200 mm deep
S READY MIX CONCRETE
Supply and placing of the Ready Mix Concrete as per IS-
4926:2003 of following grades with minimum cement content as
per IS-456:2000 and Standard Mix Design as per IS-10262:1982
with coarse aggregate of nominal size 20 mm and fine aggregate
of Zone-II as per the Mix Design approved by the Department
from standard suppliers including cost and conveyance, vertical
pumping up to 5 floors/ horizontal pumping up to 60.0 M for
buildings/ pavements etc., works for basic cost excluding
levelling, grading, spreading, curing, centring, vibrating,
compacting, finishing etc as required
820 BMT-S.01 RMC - M -10 (CEMENT CONTENT - 220 Kgs) 1 Cum 2695.00
823 BMT-S.04 Extra rate for pumping for each additional floor above 5 Floors / 1 cum 30.00
for each 12.0 M additional length over 60.0 M for horizontal
pumping to be added in the datas
824 BMT-S.05 Extra rate for pumping with Boom Pump up to 24.0 M vertical 1 cum 200.00
height from average ground level
Note: 1. Variation in cement content for mixes other than
specified above has to be adjusted in the rates as per the
corresponding approved rate of Cement per Kg. 2.For Standard
Concrete and High Strength Concretes vide IS-456, rates may be
67
SS RATE
Sl.
No
20010-11
arrived as per the design mixes.
U EXPANSION JOINT FILLERS
826 BMT-U.01 Supply of high performance expansion joint filler board 1 Sqm 653.00
conforming to M.O.S.T "Silflex" Capcell HD-100 - 18 mm THICK
829 BMT-U.04 Supply of expansion joint filler board for buildings, columns, 1 Sqm 262.00
beams and slabs "ARMOUR BOARD" SILFILL. 20 mm THICK
832 BMT-U.07 Supply of back up to cold applied sealant in construction and 1 RM 10.00
longitudinal joint "back up road" silseal - 10 mm OD
V LABOUR CHARGES
837 BMM-V.01 Bailing out water for earth work excavation /concrete for 1 cum 127.00
foundation below water level. (For building items only) - Other
than sandy soil - 0.0 M to 1.0 M
840 BMM-V.04 Bailing out water for earth work excavation / for concrete 1 cum 201.00
foundation below water level. (For building items only) Sandy
soil - 0.0 M to 1.0 M
841 BMM-V.05 Bailing out water for earth work excavation /for concrete 1 cum 312.00
soil - 1.0 M to 2.0 M
soil - 2.0 M to 3.0 M
843 BMM-V.07 Labour charges for making, fabricating office furniture, racks, 1 Sqm 317.00
work-station furniture with ply-wood sheets, decolam/ veneer
laminations including fixing cutting, making, assembling, fixing
hinges, fixing fixtures, fixing locks, pasting sheets/ laminations
fixing in position with necessary screws excluding cost of
materials, accessories, fittings
844 BMM-V.08 Labour charges for making, fabricating kitchen furniture, cup- 1 Sqm 484.00
boards with shutters, box racks, with ply-wood sheets, decolam/
veneer laminations including fixing cutting, making, assembling,
68
SS RATE
Sl.
No
20010-11
fixing hinges, fixing fixtures, fixing locks, pasting sheets/
laminations fixing in position with necessary screws excluding
cost of materials, accessories, fittings
845 BMM-V.09 Rounding the edges of Kadapa / Shahabad stone slabs of any 1 Rm 55.00
thickness including polishing the same
846 BMM-V.10 Half Rounding the edges of Marble/ Granite stone slabs of all 1 Rm 166.00
thicknesses including polishing the same.
847 BMM-V.11 Full Rounding the edges of Marble/ Granite stone slabs of all 1 Rm 216.00
thicknesses including polishing the same.
848 BMM-V.12 Machine Cutting charges - for Marble/ Granite slabs up to 50 mm 1 RM 9.00
thick by mechanical device.
849 BMM-V.13 Flat nosing to Kadapa/ Shahabad stone slabs of any thick 1 Rm 9.00
850 BMM-V.14 Labour charges for fabricating steel works like Window Grills, 1 Kg 14.00
Compound Wall Grills, Iron Doors, Windows including cost of
welding rods, power charges, excluding cost of fixing in position
851 BMM-V.15 Labour charges for fixing Iron Doors, Iron Windows and Window 1 Kg 3.00
Grills in position
852 BMM-V.16 Labour charges for fabricating all heavy steel works like Trusses, 1 Kg 12.00
Stanchions, Heavy Beams and Girders including cost of welding
rods, power charges, etc excluding cost of fixing in position
853 BMM-V.17 Labour charges for fixing heavy iron grills, Trusses, Stanchions, 1 Kg 10.00
Heavy Beams and Girders erecting in position and fixing by using
chain pulley blocks, Derek pole arrangements and cranes etc.,
complete in position
854 BMM-V.18 Labour charges for Fabrication of stainless steel railing works 1 Kg 69.00
using stainless steel welding rods including buffing, polishing,
lacquer finishing, to present seamless finish
855 BMM-V.19 Labour charges for Fabrication of stainless steel sheet cladding 1 sqm 920.00
works using stainless steel welding rods including buffing,
polishing, lacquer finishing, to present seamless finish
856 BMM-V.20 Labour charges for Glass designing works on any thickness of 1 Sqm 501.00
Glass including fixing at site - Etching works
Glass including fixing at site - Reverse Etching work
Glass including fixing at site - Acid wash works
859 BMM-V.23 Labour charges for fixing Flush door shutters of any thickness to 1 Sqm 200.00
the existing door frame including fixing the fixtures to the door
shutter excluding cost of shutter
860 BMM-V.24 Labour charges for fixing glass panes of any thickness to the 1 Sqm 150.00
existing door / window panes including fixing the beading
excluding cost of beading
W MISCELLANEOUS ITEMS
861 BMS-W.01 Supplying Aluminium anodised Sections for Doors, partitions, 1 Kg 250.00
windows, Ventilators (including annodization cost)
862 BMS-W.02 Sun Control film to the glazed windows partition including labour 1 sqm 285.00
charges.
863 BMS-W.03 Aluminium Venetian Blinds horizontal 25.4 mm wide with all 1 sqm 727.00
accessories.
864 BMS-W.04 Aluminium Venetian Blinds horizontal 20.0 mm wide with all 1 sqm 693.00
accessories.
865 BMS-W.05 Venetian blinds Vertical blinds 100 mm wide with all accessories. 1 sqm 1176.00
69
SS RATE
Sl.
No
20010-11
866 BMS-W.06 Rubber Beading 1 RM 2.00
867 BMS-W.07 S&F of marblex flooring with 2.0 mm thick in rolls. 1 sqm 369.00
868 BMS-W.08 S&F Vinyl Flooring with 1.5 mm thick in rolls 1 sqm 369.00
869 BMS-W.09 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% 1 Litre 200.00
870 BMS-W.10 Soft Brush Each 130.00
871 BMS-W.11 Wire Brush Each 29.00
872 BMS-W.12 Supplying and fixing aluminium composite cladding of approved 1 Sqm 2024.00
make (Alucopanel, alucobonel, Reynobond, Lennox Durabuid,
Alstrong legame, Alpolic, Alcomat, Alshine etc.,) with skin
material 0.25 mm thick aluminium sheet cover material natural
polyethylene aluminium cladding panel fixed with extruded
aluminium basis frame (50x25x1.5mm) angle cleats, weather
sealants, rivets, GI brackets all as approved, using suitable bolts
on structural steel work including necessary accessories
complete in all respects including all scaffolding and labour
charges etc., complete for finished item of work but excluding
cost of structural steel fabrication, if any, ACP Cladding - 3 mm
thk
thk
thk
875 BMS-W.15 CEMENT JALI - 25 mm thick 1 sqm 189.00
878 BMS-W.18 Aluminium sheet 24 Gauge 1 Sqm 262.00
879 BMS-W.19 7.5mm thick Aluminium Grill (as approved by the department) 1 Sqm 965.00
3.58 Kg/Sqm.
880 BMS-W.20 Mastic pad 2'0 " x 4'0" (0.60M x 1.2M) of 1" (25.4 mm ) thick 1 Sqm 805.00
881 BMS-W.21 Mastic pad 2'0 " x 4'0" (0.60M x 1.2M) of 1/2" (12.7 mm ) thick 1 Sqm 461.00
SINTEX OR EQUIVALENT SMC SIGN BOARDS: Supply of hot
pressed compression moulded SMC sign plates for making road
70
SS RATE
Sl.
No
20010-11
signs ass per the approved dimensions of National Highway
Authority Of India, complete, for finished item of work.
882 BMS-W.22 Circular sign plate Dia 400mm. Each. 506.00
883 BMS-W.23 Circular sign plate Dia 600mm. Each. 1330.00
884 BMS-W.24 Circular sing plate Dia 870mm Each. 2665.00
885 BMS-W.25 Triangular sign plate 600mm. Each. 683.00
886 BMS-W.26 Triangular sign plate 900mm. Each. 1542.00
887 BMS-W.27 Square sign plate 600mm. Each. 1236.00
888 BMS-W.28 Square sign plate 1000mm. Each. 4591.00
889 BMS-W.29 Supply of Sintex /Aqua tech or equivalent Polyethylene water Litre. 5.75
storage tank double layer confirming to ISI 12701/96 mark with
lid.
ELIXIR PEB OR EQUIVALENT PRE ENGINEERED BUILDINGS FOR A
MAXIMUM SPAN OF 9 MTRS
Design, fabrication & supply of light weight pre engineered
buildings for a maximum span of 9 metres with 50x50x2.8 mm
M.S hollow square tubes for columns, trusses & purlins walls
with sandwich panels made up of 2 Nos 10mm thick cement
bonded particle/ fibre boards with 25mm thick 12 kg/cum
density expanded polystyrene in between encased in 1.25 mm
thick 24x7x26 mm ‘W’ tracks in bottom & top and ‘H’ section for
sides with doors, windows & ventilators, roofing with 26 gauge
pre painted profiled sheets fixed with self tapping/ drilling
screws, painting with enamel paint for steel items, OBD for
interiors and ace for exteriors & providing base plates, templates
& anchor bolts along with civil foundation designs & drawings for
the finished item of work. Inclusive of all Taxes and Duties.
890 BMS-W.30 Steel Structure: - Structure is made up of 50x50X 2.8 1 RM 316.80
m/33x66x2.8mm thick hollow M.S. sections for Trusses, columns,
and purloins. - Columns
891 BMS-W.31 Steel Structure: - Structure is made up of 50x50X 2.8 1 RM 1450.00
m/33x66x2.8mm thick hollow M.S. sections for Trusses, columns,
and purloins. Trusses
892 BMS-W.32 10 mm thick 200x200 mm M.s. plates for base plates, 250 mm Each 550.00
long 12mm Φ anchor bolts with plate washer and nuts complete
with one coat of Asian or equivalent red oxide paint.
893 BMS-W.33 Sandwich panels: Sandwich panels of 50 mm thick with 25 mm 1 Sqm 1147.00
thermocol of 12 kg / cum, fixed in between 2 Nos 10 mm
cement bonded wood particle / fibre boards properly fixed
together with 30 mmx30mmx30mm wood pieces along width &
length wherever necessary
894 BMS-W.34 U' Tracks & 'H' Section:- Bottom & Top 'U' Tracks are made of 1 RM 125.00
1.25 mm thick 120 GSM G.I. Sheet of size 24x51x26 mm size.
895 BMS-W.35 Fabricated 'H' sections are made up of 2 Nos 1.25 mm thick C.R. 1 RM 180.00
Of 40 mm width for flanges and 1 Nos of 2 mm thick C.R. of 50
mm width plate for web. will be used
896 BMS-W.36 Sandwich Panel joinery is made up of "Elixir" couplers or 1RM 205.00
equivalent made from 0.6 mm G.I. roll formed section to hold 2
Nos of 10 mm board on both sides with 25 mm thermocol in
between.
897 BMS-W.37 Window:- windows are made up of 51 x51 mm step 'U' section 1 Sqm 3500.00
made from 1.25 thick MS Cold rolled Steel Sheet and Windows
71
SS RATE
Sl.
No
20010-11
Shutters & Grill are made of 47x20 mm size pre painted section
with 4 mm glass complete with necessary hardware. Grills are
made from 8 mm square rod at 100 mm spacing.
898 BMS-W.38 Door Frames :-51 X 51 Stepped ' U' section made from 1.25 mm 1 Sqm 3350.00
thick C.R. section with a 32 mm rebate for 30 mm flush door and
Door Shutters with 30 mm thick block board / flush doors with
boiling water proof plywood complete with necessary Hard
ware.
899 BMS-W.39 Ventilators:- Ventilators are made of 51x51 mm step 'U' section 1 Sqm 3750.00
made From 1.25 mm thick C.R. sheet with fixed louvers and
glass.
900 BMS-W.40 Painting:-1) Steel structure is to be painted with 2 coats of Grade 1 Sqm 95.00
I enamel paint.
901 BMS-W.41 2) Exterior walls are painted with one coast of primer and 2 coats 1 Sqm 85.00
of ACE" or equivalent paint.
902 BMS-W.42 3) Interiors are painted with 1+2 coat of O.B.D. 1 Sqm 75.00
903 BMS-W.43 Toilets: - Toilets are provided as per plan with a provision for Each 800.00
fixing the wash basin, W.C. etc only is made with M.S. steel
section secured to the walls with toilet bracket provision
excluding cost of WC/ Wash basin etc
904 BMS-W.44 Sun shades: - Sun shades will be provided wherever necessary Each 2700.00
with 300 mm more than the width of window. 25x25 mm angle
frame to cover 450 mm in the front and the sides. 10mm
cement bonded particle board will be fixed on the frame work
and sealed with green paste or equivalent.
905 BMS-W.45 Roofing:- Roofing will be provided with 0.5mm thick galvanized / 1 Sqm 610.00
pre painted G.I. profiled sheets fixed to the purlins with 14 size
self drilling screws with neoprene washer. Side laps are stitched
with self tapping / drilling screws. End laps are to be sealed with
25x3 mm Butyl tape. The sheets are provided with anti capillary
grove.
Supply and fixing of factory made Bathroom door frames without
threshold, fabricated from pre-painted cold roll formed section
50mm x 50 mm made of galvanized (base steel as per IS – 513 ‘D’
quality, galvanized as per IS-277 with Zinc of 120 Gms/sqm) steel
colour coated sections with total coated thickness of 1 mm,
primer coated with epoxy primer of 5-7 microns thick, finish
painted with polyester paint of 12-16 microns and back coated
with alkyd backer of 5-7 microns. The frame section is to be filled
with polyurethane (P.U. Foam) of 40 Kg/Cum; and the sections
are cut to length and mitre joined by means of 1.25mm thick
CRCA electroplated corner brackets of size 75 x 75 mm and
1.25mm thick electroplated stiffeners of size 150mm for fixing
hold fasts and hinges together with the following MS Power
coated fitting (Supply and fixing) of approved make.
a) 6 Nos M.S. Z. Type hold fasts made of 30mm x 3 mm MS flat
of 230mm long, 3 Nos each side expandable PVC covered screw
type fasteners
b) 2.5 mm x 300 mm long ‘T’ hinges / 2.5mm x 50 mm x 100mm
two way but hinges (3 Nos for single leaf or 2 Nos for Double
leaf /leaf )
906 BMS-W.46 c) 12 mm Dia MS tie rod at bottom with necessary size of nuts on 1 RM 327.00
72
SS RATE
Sl.
No
20010-11
either side.
907 BMS-W.47 Preparing gabions with jungle wood Each 3.00
908 BMS-W.48 Planting plants Each 2.00
909 BMS-W.49 Pruning plants Each 2.00
910 BMS-W.50 Maintaining avenues including fencing, weeding, mulching, Each 6.00
watering etc per plant.
911 BMS-W.51 - do - When scattered in hot weather with extra conveyance Each 7.00
from March to June
912 BMS-W.52 Hoisting or lowering of slab 1 cum 92.00
913 BMS-W.53 Dressing faces of granite stone (double line dressing) 1 Sqm 152.00
914 BMS-W.54 Dressing faces of other than granite stone(double line dressing) 1 Sqm 95.00
915 BMS-W.55 Supply of CENTURYWELLS or equivalent Pre-painted Galvalume 1 Sqm 400.00
Trapezoidal Profile Roofing sheets with 0.50mm thickness,
Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA.
Paint coating: Regular Modified Polyester painting. Painting
Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns.
Sheet Width: 1.020, Length: Maximum 12 Meters with Regular
Range Colours
916 BMS-W.56 Supply of CENTURYWELLS or equivalent Pre-painted Galvalume 1 Sqm 390.00
Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA.
Range Colours
917 BMS-W.57 Supply of CENTURYWELLS or equivalent Pre-painted Galvanized 1 Sqm 350.00
Coating: Zinc coating Z120 GSM. Tensile Strength: 300 MPA.
Range Colours
918 BMS-W.58 Supply of CENTURYWELLS or equivalent Pre-painted Galvanized 1 Sqm 330.00
Coating: Zinc coating Z120 GSM. Tensile Strength: 300 MPA.
Range Colours
919 BMS-W.59 Supply of CENTURYWELLS or equivalent Roof Accessories 1 RM 270.00
medium size: Ridge, Barge Cap, Corner Trim, L-Flashing, Down
Pipes, Gutter etc., with 0.50mm thick, Width: 0.585, Length:
Maximum 2½ Meters
920 BMS-W.60 Supply of CENTURYWELLS or equivalent Roof Accessories 1 RM 240.00
medium size: Ridge, Barge Cap, Corner Trim, L-Flashing, Down
Pipes, Gutter etc., with 0.47mm thick, Width: 0.585, Length:
Maximum 2½ Meters
921 BMS-W.61 75 mm long screws - 1 Each 4.00
922 BMS-W.62 G.I scam bolts & nuts 1 Each 5.00
923 BMS-W.63 G.I bolts & nuts 1 Each 5.00
924 BMS-W.64 G.I ‘J’ bolts 8 mm dia 1 Each 8.00
925 BMS-W.65 G.I Washers 1 Each 0.50
73
SS RATE
Sl.
No
20010-11
926 BMS-W.66 Limpet washers (for scam & ‘J’ bolts) 1 Each 0.25
927 BMS-W.67 Bitumen washers 1 Each 0.20
928 BMS-W.68 White Cement 1 Kg 25.00
X MACHINERY CHARGES, HIRE CHARGES FOR CENTRING
929 BMC-X.01 Machine charges of rubbing/ polishing floor 1 day 1800.00
930 BMC-X.02 Power Saw Cutter - Hand Operated - Hire charges 1 Hr 105.00
931 BMC-X.03 Power Drill - Hand Operated - Hire Charges 1 Hr 97.00
932 BMC-X.04 Grinding Mortar (Spl Grinding) 1 day 900.00
933 BMC-X.05 Casuarina Balli Props - 3" to 4" dia - 12'-0" Height Each 60.00
934 BMC-X.06 Casuarina Balli Props - 4" to 8" dia - 20'-0" Height Each 100.00
935 BMC-X.07 Wall Plate Brackets / beam bottom supports Each 170.00
936 BMC-X.08 Wedge Plate fixture Each 7.50
937 BMC-X.09 Runner beams of approximately 4" x 4" size RM 330.00
938 BMC-X.10 Steel Plates for form works 1 sqm 1000.00
939 BMC-X.11 Scaffolding Pipes & Centering accessories 1 Kg 75.00
940 BMC-X.12 Scaffold Boards - Bamboo scaffolds - Bamboos - 8'0" long Each 100.00
NOTE
1 All the items to be used on work are of first quality & ISI and as approved by the Engineer In charge of the work.
2 Supply Rates for all the materials are based on market rates plus Sales Tax/ Material VAT.
3 Works Contract VAT for General/ Composition Scheme on finished items may be allowed as applicable.
4 SOR Rates for Building items are purely for guidance for the officers for preparation of estimates
vide para.113 of APPWD code. Authority who prepares the estimate is however responsible for
proper rates as envisaged in para.45 of APPWD code.
LEGEND "BMT" -X.XX "BMT" for BUILDING MATERIALS
"BMM"-X.XX "BMM" for LABOUR CHARGES
"BMS"-X.XX "BMS" for MISCELLANEOUS
"BMC"-X.XX "BMC" for MACHINERY, HIRE CHARGES
XXX-"A".XX "A" for NAME OF THE SECTION
XXX-X."01" "01" for SERIAL NUMBER OF THE ITEM
74
Centring
Material Hire Unit of
Sl NAME OF THE STRUCTURAL MEMBER Labour charges Charges for
charges Measurement
2010-11
1 2 3 4 5 6
HIRE CHARGES FOR CENTERING & SCAFFOLDING - Unsupported Height upto 3.66 M
Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc.,
A FOOTINGS Rs. 49.00 Rs. 303.00 Rs. 352.00 per 1 cum

B PEDESTALS Rs. 58.00 Rs. 481.00 Rs. 539.00 per 1 cum
C PLINTH BEAMS Rs. 827.00 Rs. 729.00 Rs. 1556.00 per 1 cum
D LINTELS Rs. 703.00 Rs. 619.00 Rs. 1322.00 per 1 cum
E CHAJJAS - SUNSHADES Rs. 139.00 Rs. 95.00 Rs. 234.00 per 1 sqm
F COLUMNS Rs. 106.00 Rs. 870.00 Rs. 976.00 per 1 cum
G BEAMS Rs. 1064.00 Rs. 729.00 Rs. 1793.00 per 1 cum
H SLABS - Up to 150 mm thick Rs. 119.00 Rs. 82.00 Rs. 201.00 per 1 sqm
I SLABS - above 150 mm - Up to 300 Rs. 124.00 Rs. 85.00 Rs. 209.00 per 1 sqm
mm thick
J SLABS - above 300 mm thick Rs. 130.00 Rs. 89.00 Rs. 219.00 per 1 sqm
K WAFFLE - (GRID) SLABS (Rib Beams Rs. 438.00 Rs. 300.00 Rs. 738.00 per 1 sqm
with Slabs)
L PERGOLA SLABS (Only Rib Beams) Rs. 307.00 Rs. 211.00 Rs. 518.00 per 1 sqm
M ARCH BEAMS - up to 1.5 M Span Rs. 1209.00 Rs. 829.00 Rs. 2038.00 per 1 cum
N ARCH BEAMS - above 1.5 M Span Rs. 1226.00 Rs. 841.00 Rs. 2067.00 per 1 cum
O DOME SLABS Rs. 2281.00 Rs. 1341.00 Rs. 3622.00 per 1 cum
P HELICAL STAIRCASES Rs. 174.00 Rs. 102.00 Rs. 276.00 per 1 sqm
Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc.,

mm thick
with Slabs)
75
Centring
Material Hire Unit of
Sl NAME OF THE STRUCTURAL MEMBER Labour charges Charges for
charges Measurement
2010-11
1 2 3 4 5 6
Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc.,

mm thick
with Slabs)
HIRE CHARGES FOR ACCESS SCAFFOLDING - upto 3.66 M using Casurina Ballies, Bamboos, Wooden Reapers,
Runners, Wood Posts, Wall Plates etc., for BRICK MASONRY/ STONE MASONRY - 1 sqm
A 1st - Floor Rs. 5.29 Rs. 33.54 Rs. 38.83 per 1 sqm
B 2nd - Floor Rs. 5.29 Rs. 42.60 Rs. 47.89 per 1 sqm
C 3rd - Floor Rs. 5.29 Rs. 56.80 Rs. 62.09 per 1 sqm
D 4th - Floor Rs. 5.29 Rs. 71.00 Rs. 76.29 per 1 sqm
E 5th - Floor Rs. 5.29 Rs. 85.20 Rs. 90.49 per 1 sqm
F 6th - Floor Rs. 5.29 Rs. 99.41 Rs. 104.69 per 1 sqm
G 7th - Floor Rs. 5.29 Rs. 113.61 Rs. 118.89 per 1 sqm
H 8th - Floor Rs. 5.29 Rs. 127.81 Rs. 133.09 per 1 sqm
I 9th - Floor Rs. 5.29 Rs. 142.01 Rs. 147.29 per 1 sqm
J 10th - Floor Rs. 5.29 Rs. 156.21 Rs. 161.50 per 1 sqm
K 11th - Floor Rs. 5.29 Rs. 170.41 Rs. 175.70 per 1 sqm
L 12th - Floor Rs. 5.29 Rs. 184.61 Rs. 189.90 per 1 sqm
M 13th - Floor Rs. 5.29 Rs. 198.81 Rs. 204.10 per 1 sqm
N 14th - Floor Rs. 5.29 Rs. 213.01 Rs. 218.30 per 1 sqm
O 15th - Floor Rs. 5.29 Rs. 227.21 Rs. 232.50 per 1 sqm
76
HIRE CHARGES FOR ACCESS SCAFFOLDING - upto 3.66 M using Casurina Ballies, Bamboos, Wooden Reapers,
Runners, Wood Posts, Wall Plates etc., for PLASTERING to WALLS - 1 sqm
HIRE CHARGES FOR STAGE SCAFFOLDING - upto 3.66 M using Casurina Ballies, Bamboos, Wooden Reapers, Runners,
Wood Posts, Wall Plates etc., for CEILING PLASTERING - 1 sqm
77
CENTERING & SCAFFOLDING CHARGES- FLOOR WISE RATES for Steel scaffolding pipes, jack Props, Steel Centering Plates,etc., for unsupported height 3.66 M
WAFFLE
SLABS - - (GRID) ARCH
SLABS - PERGOLA ARCH DOME
SLABS - above 150 SLABS BEAMS - HELICAL
CHAJJAS - above SLABS BEAMS - SLABS
Floor LINTELS COLUMNS BEAMS Up to 150 mm - Up (Rib above STAIRCASES
SUNSHADES 300 mm (Only Rib up to 1.5 (Plan
mm thick to 300 Beams 1.5 M (Plan area)
thick Beams) M Span area)
mm thick with Span
Slabs)
Unit of
Per 1 cum Per 1 sqm Per 1 cum Per 1 cum Per 1 sqm Per 1 sqm Per 1 sqm Per 1 sqm Per 1 sqm Per 1 cum Per 1 cum Per 1 sqm Per 1 sqm
Measurement
Material Hire
H 703.00 139.00 106.00 1064.00 119.00 124.00 130.00 438.00 307.00 1209.00 1226.00 2281.00 174.00
for any Floor
Labour
Charges for L 619.00 95.00 870.00 729.00 82.00 85.00 89.00 300.00 211.00 829.00 841.00 1341.00 102.00
1st Floor
Total Hire
T 1322.00 234.00 976.00 1793.00 201.00 209.00 219.00 738.00 518.00 2038.00 2067.00 3622.00 276.00
Charges (H+L)
1st - Floor 619.00 95.00 870.00 729.00 82.00 85.00 89.00 300.00 211.00 829.00 841.00 1341.00 102.00
2nd - Floor 681.00 105.00 957.00 802.00 90.00 94.00 98.00 330.00 232.00 912.00 925.00 1475.00 112.00
3rd - Floor 743.00 114.00 1044.00 875.00 98.00 102.00 107.00 360.00 253.00 995.00 1009.00 1609.00 122.00
4th - Floor 805.00 124.00 1131.00 948.00 107.00 111.00 116.00 390.00 274.00 1078.00 1093.00 1743.00 133.00
5th - Floor 867.00 133.00 1218.00 1021.00 115.00 119.00 125.00 420.00 295.00 1161.00 1177.00 1877.00 143.00
6th - Floor 929.00 143.00 1305.00 1094.00 123.00 128.00 134.00 450.00 317.00 1244.00 1262.00 2012.00 153.00
7th - Floor 990.00 152.00 1392.00 1166.00 131.00 136.00 142.00 480.00 338.00 1326.00 1346.00 2146.00 163.00
8th - Floor 1052.00 162.00 1479.00 1239.00 139.00 145.00 151.00 510.00 359.00 1409.00 1430.00 2280.00 173.00
9th - Floor 1114.00 171.00 1566.00 1312.00 148.00 153.00 160.00 540.00 380.00 1492.00 1514.00 2414.00 184.00
10th - Floor 1176.00 181.00 1653.00 1385.00 156.00 162.00 169.00 570.00 401.00 1575.00 1598.00 2548.00 194.00
11th - Floor 1238.00 190.00 1740.00 1458.00 164.00 170.00 178.00 600.00 422.00 1658.00 1682.00 2682.00 204.00
12th - Floor 1300.00 200.00 1827.00 1531.00 172.00 179.00 187.00 630.00 443.00 1741.00 1766.00 2816.00 214.00
13th - Floor 1362.00 209.00 1914.00 1604.00 180.00 187.00 196.00 660.00 464.00 1824.00 1850.00 2950.00 224.00
14th - Floor 1424.00 219.00 2001.00 1677.00 189.00 196.00 205.00 690.00 485.00 1907.00 1934.00 3084.00 235.00
15th - Floor 1486.00 228.00 2088.00 1750.00 197.00 204.00 214.00 720.00 506.00 1990.00 2018.00 3218.00 245.00
Note: - Centering & scaffolding charges for steel scaffolding with pipes, jack props, steel centring plates for unsupported heights of every 610 mm height above 3.66 M may be
allowed at 16.666% more than the basic material hire charges and relevant labour charges of the applicable floor and item
4.27 M 16.666% 4.88 M 33.332% 5.49 M 49.998% 6.1 M 66.664% 6.71 M 83.330%
78
CENTERING & SCAFFOLDING CHARGES- FLOOR WISE RATES for Steel scaffolding pipes, jack Props, Steel Centering Plates,etc., for unsupported height 7.32 M
WAFFLE
SLABS - - (GRID) ARCH
SLABS - PERGOLA ARCH DOME
SLABS - above 150 SLABS BEAMS - HELICAL
CHAJJAS - above SLABS BEAMS - SLABS
LINTELS COLUMNS BEAMS Up to 150 mm - Up (Rib above STAIRCASES
SUNSHADES 300 mm (Only Rib up to 1.5 (Plan
mm thick to 300 Beams 1.5 M (Plan Area)
thick Beams) M Span Area)
mm thick with Span
Slabs)
Unit of
Measurement
Material Hire for
any Floor H 1266.00 250.00 190.00 1916.00 215.00 223.00 234.00 789.00 553.00 2179.00 2210.00 4111.00 313.00
Labour Charges
for 1st Floor L 977.00 150.00 1371.00 1150.00 129.00 134.00 140.00 474.00 332.00 1307.00 1326.00 2114.00 161.00
Total Hire
T 2243.00 400.00 1561.00 3066.00 344.00 357.00 374.00 1263.00 885.00 3486.00 3536.00 6225.00 474.00
Charges (H+L)
1st - Floor 977.00 150.00 1371.00 1150.00 129.00 134.00 140.00 474.00 332.00 1307.00 1326.00 2114.00 161.00
2nd - Floor 1075.00 165.00 1508.00 1265.00 142.00 147.00 154.00 521.00 365.00 1438.00 1459.00 2325.00 177.00
3rd - Floor 1172.00 180.00 1645.00 1380.00 155.00 161.00 168.00 569.00 398.00 1568.00 1591.00 2537.00 193.00
4th - Floor 1270.00 195.00 1782.00 1495.00 168.00 174.00 182.00 616.00 432.00 1699.00 1724.00 2748.00 209.00
5th - Floor 1368.00 210.00 1919.00 1610.00 181.00 188.00 196.00 664.00 465.00 1830.00 1856.00 2960.00 225.00
6th - Floor 1466.00 225.00 2057.00 1725.00 194.00 201.00 210.00 711.00 498.00 1961.00 1989.00 3171.00 242.00
7th - Floor 1563.00 240.00 2194.00 1840.00 206.00 214.00 224.00 758.00 531.00 2091.00 2122.00 3382.00 258.00
8th - Floor 1661.00 255.00 2331.00 1955.00 219.00 228.00 238.00 806.00 564.00 2222.00 2254.00 3594.00 274.00
9th - Floor 1759.00 270.00 2468.00 2070.00 232.00 241.00 252.00 853.00 598.00 2353.00 2387.00 3805.00 290.00
10th - Floor 1856.00 285.00 2605.00 2185.00 245.00 255.00 266.00 901.00 631.00 2483.00 2519.00 4017.00 306.00
11th - Floor 1954.00 300.00 2742.00 2300.00 258.00 268.00 280.00 948.00 664.00 2614.00 2652.00 4228.00 322.00
12th - Floor 2052.00 315.00 2879.00 2415.00 271.00 281.00 294.00 995.00 697.00 2745.00 2785.00 4439.00 338.00
13th - Floor 2149.00 330.00 3016.00 2530.00 284.00 295.00 308.00 1043.00 730.00 2875.00 2917.00 4651.00 354.00
14th - Floor 2247.00 345.00 3153.00 2645.00 297.00 308.00 322.00 1090.00 764.00 3006.00 3050.00 4862.00 370.00
15th - Floor 2345.00 360.00 3290.00 2760.00 310.00 322.00 336.00 1138.00 797.00 3137.00 3182.00 5074.00 386.00
79
CENTERING & SCAFFOLDING CHARGES- FLOOR WISE RATES for Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates, Steel Centring Plates etc., for unsupported
height 3.66 M
WAFFLE
SLABS -
- (GRID) ARCH
SLABS - above SLABS - PERGOLA ARCH
SLABS BEAMS -
CHAJJAS - Up to 150 mm above SLABS BEAMS - DOME HELICAL
LINTELS COLUMNS BEAMS (Rib above
SUNSHADES 150 mm - Up to 300 mm (Only Rib up to 1.5 SLABS STAIRCASES
Beams 1.5 M
thick 300 mm thick Beams) M Span
with Span
thick
Slabs)
Unit of
Measurement
Hire Charges H 525.00 104.00 79.00 795.00 89.00 93.00 97.00 327.00 230.00 904.00 916.00 1705.00 130.00
Labour
Charges L 492.00 76.00 691.00 580.00 65.00 68.00 71.00 239.00 167.00 659.00 668.00 1066.00 81.00
Unit of
1017.00 180.00 770.00 1375.00 154.00 161.00 168.00 566.00 397.00 1563.00 1584.00 2771.00 211.00
Measurement T
1st - Floor 492.00 76.00 691.00 580.00 65.00 68.00 71.00 239.00 167.00 659.00 668.00 1066.00 81.00
2nd - Floor 541.00 84.00 760.00 638.00 72.00 75.00 78.00 263.00 184.00 725.00 735.00 1173.00 89.00
3rd - Floor 590.00 91.00 829.00 696.00 78.00 82.00 85.00 287.00 200.00 791.00 802.00 1279.00 97.00
4th - Floor 640.00 99.00 898.00 754.00 85.00 88.00 92.00 311.00 217.00 857.00 868.00 1386.00 105.00
5th - Floor 689.00 106.00 967.00 812.00 91.00 95.00 99.00 335.00 234.00 923.00 935.00 1492.00 113.00
6th - Floor 738.00 114.00 1037.00 870.00 98.00 102.00 107.00 359.00 251.00 989.00 1002.00 1599.00 122.00
7th - Floor 787.00 122.00 1106.00 928.00 104.00 109.00 114.00 382.00 267.00 1054.00 1069.00 1706.00 130.00
8th - Floor 836.00 129.00 1175.00 986.00 111.00 116.00 121.00 406.00 284.00 1120.00 1136.00 1812.00 138.00
9th - Floor 886.00 137.00 1244.00 1044.00 117.00 122.00 128.00 430.00 301.00 1186.00 1202.00 1919.00 146.00
10th - Floor 935.00 144.00 1313.00 1102.00 124.00 129.00 135.00 454.00 317.00 1252.00 1269.00 2025.00 154.00
11th - Floor 984.00 152.00 1382.00 1160.00 130.00 136.00 142.00 478.00 334.00 1318.00 1336.00 2132.00 162.00
12th - Floor 1033.00 160.00 1451.00 1218.00 137.00 143.00 149.00 502.00 351.00 1384.00 1403.00 2239.00 170.00
13th - Floor 1082.00 167.00 1520.00 1276.00 143.00 150.00 156.00 526.00 367.00 1450.00 1470.00 2345.00 178.00
14th - Floor 1132.00 175.00 1589.00 1334.00 150.00 156.00 163.00 550.00 384.00 1516.00 1536.00 2452.00 186.00
15th - Floor 1181.00 182.00 1658.00 1392.00 156.00 163.00 170.00 574.00 401.00 1582.00 1603.00 2558.00 194.00
80
Water supply Items (Building SoR-2010-11)
WATER SUPPLY
&
SANITARY ITEMS
81
Water Supply Items (Building SoR-2010-11)
Sl. SS RATE FOR

Item Code Description of item Unit
No 20010-11
1 2 3 4 5
A S.W.G. PIPES & FITTINGS
1 BMW-A.01 Supplying, laying, jointing and testing 101.6 mm SWG SP- 1 RM 248.00
1 pipes of ISI make conforming to ISI 651 & 4127 with
airtight cement joints in CM 1.5:1 prop. Including
excavation of trenches and socket pits in any soil (except
rock requiring blasting) up to 1524 mm(5'0") depth and
refilling with watering and tamping.
airtight cement joints in CM 1:5:1 prop. including
rock requiring blasting) up to 914.4 mm (3'0") depth and
airtight cement joints in CM 1.5:1 prop. including
rock requiring blasting) up to 1524 mm(5'0") depth and
airtight cement joints in CM 1.5:1 prop. including
rock requiring blasting) up to 914.4 mm (3'0")) depth and
5 BMW-A.05 labour charges only for laying, jointing and testing SWG 1 RM 89.00
pipes of any dia with airtight cement joints including
excavation of trenches and socket pits in any soil up to
914.4 mm (3'0") depth (except rock requiring blasting)
and refilling with watering and tamping.
6 BMW-A.06 labour charges only for laying, jointing and testing SWG 1 RM 120.00
pipes of any dia with airtight cement joints including
excavation of trenches and socket pits in any soil up to
1524 mm (5'-0") depth (except rock requiring blasting)
and refilling with watering and tamping.
7 BMW-A.07 a)Supplying , laying, jointing and testing 152.4 mm CC 1 RM 70.00
bed 1:2:4 Prop: using 19.05 mm gauge graded granite
metal chips and cradling 101.6 mm SWG pipe line all
round to have 76.2 mm thick cover over the sockets.
8 BMW-A.08 b) - do - labour charges only 1 RM 7.00
9 BMW-A.09 a)Supplying , laying, jointing and testing 152.4 mm CC 1 RM 121.00
bed 1:2:4 Prop: using 19.05 mm gauge graded granite
metal chips and cradling 152.4 mm SWG pipe line all
round to have 76.2 mm thick cover over the sockets.
11 BMW-A.11 a) Supplying & Laying 101.6 mm SWG channels with 1 RM 67.00
cement mortar joints with suitable brick masonry for
fixing the channels in position
13 BMW-A.13 a) Supplying & Laying 152.4 mm SWG channels with 1 RM 126.00
cement mortar joints with suitable brick masonry for
fixing the channels in position
82
Sl. SS RATE FOR

No 20010-11
15 BMW-A.15 Supply of SWG SP-1 pipe conforming to ISI 651 - 4" dia 1 RM 134.00
(101.6mm)
(152.4mm)
(203.2mm)
(254 mm)
(300 mm)
(350 mm)
(400 mm)
(450 mm)
(101.6mm)
(152.4mm)
(203.2mm)
(254 mm)
(300 mm)
(350 mm)
(400 mm)
(450 mm)
(101.6mm)
(152.4mm)
(203.2mm)
(254 mm)
(300 mm)
(350 mm)
(400 mm)
(450 mm)
39 BMW-A.39 Supply of SWG Bends conforming to IS standards -100 Each 67.00
mm dia
mm dia
83
Sl. SS RATE FOR

No 20010-11
mm dia
mm dia
mm dia
mm dia
45 BMW-A.45 Supply of SWG Junctions (T's & Y's) conforming to IS Each 129.00
standards with length of barrel 60 cm for - 100 x 100
66 BMW-A.66 Supply of SWG Plugs conforming to IS standards for 100 Each 24.00
mm dia
84
Sl. SS RATE FOR

No 20010-11
mm dia
mm dia
mm dia
mm dia
mm dia
72 BMW-A.72 Supplying & fixing 150 mm x 100 mm SWG gully traps Each 419.00
conforming to ISI 651 & 4127 with C.I Grating & Cost.
Brick masonry in CM 1:6 prop. Intermediate chamber and
fitted with 304.8 mm x 288.6mm (12"x9") C.I Frame and
hinged cover
73 BMW-A.73 Supply of SWG Gully Traps (Round & Square) conforming Each 187.00
to IS standards 150 x 100 mm
74 BMW-A.74 Labour charges for fixing and laying the SWG Junctions/ Each 18.00
Plugs/ Bends of any dia with airtight cement joints as per
standard practice
75 BMW-A.75 Supply of SWG Saddles conforming to IS standards 150 x 136.00
100 mm
100 mm
100 mm
B MAN HOLES & INSPECTION CHAMBERS - AS PER - IS
4111 : Part 1 : 1986
78 BMW-B.01 Constructing 904.0 mm (3’0”) dia solid block masonry Each 4648.00
inspection chamber as per IS - 4111: Part-1:1986 with
cement mortar (1:6) prop using fly-ash blocks of 225 mm
thick from approved source having a minimum crushing
strength of 10 N/sq.mm including plastering with cement
mortar 1:3 prop; ½” thick both inside and outside fitted
with 20” dia RCC manhole covers and frames including
excavating pits up to a depth of 904 mm (3'-0") in all
sorts of soils (excluding rock) and laying cement concrete
(1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C.
1:2:4 benching and channel 100 mm thick as per
Standard specification and including cost and
conveyance of all materials like cement, sand, bricks,
water etc., to site, cost of seigniorage charges on all
materials and all incidental and operational, labour
charges like mixing cement mortar, constructing
masonry, lift charges, curing etc., complete for finished
item of work as per Standard specification.
79 BMW-B.02 Constructing 904.0 mm (3’0”) dia solid block masonry Each 7225.00
cement mortar (1:6) prop using fly-ash blocks of 225 mm
thick from approved source having a minimum crushing
strength of 10 N/sq.mm including plastering with cement
mortar 1:3 prop; ½” thick both inside and outside fitted
with 20” dia RCC manhole covers and frames including
excavating pits up to a depth of 1524 mm (5'-0") in all
sorts of soils (excluding rock) and laying cement concrete
85
Sl. SS RATE FOR

No 20010-11
(1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C.
1:2:4 benching and channel 100 mm thick as per
Standard specification and including cost and
80 BMW-B.03 Constructing 904.0 mm (3’0”) dia brick masonry Each 4096.00
cement mortar (1:6) prop using 2nd Class Clay Bricks of
225 mm thick from approved source having a minimum
crushing strength of 5 N/sq.mm including plastering with
cement mortar 1:3 prop; ½” thick both inside and outside
fitted with 20” dia RCC manhole covers and frames
including excavating pits up to a depth of 904 mm (3'-0")
in all sorts of soils (excluding rock) and laying cement
concrete (1:4:8) 150 mm thick using 40 mm HBG Metal
and P.C.C. 1:2:4 benching and channel 100 mm thick as
per Standard specification and including cost and
81 BMW-B.04 Constructing 904.0 mm (3’0”) dia brick masonry Each 6160.00
cement mortar (1:6) prop using 2nd Class Clay Bricks of
225 mm thick from approved source having a minimum
crushing strength of 5 N/sq.mm including plastering with
cement mortar 1:3 prop; ½” thick both inside and outside
fitted with 20” dia RCC manhole covers and frames
including excavating pits up to a depth of 1524 mm (5'-
0") in all sorts of soils (excluding rock) and laying cement
concrete (1:4:8) 150 mm thick using 40 mm HBG Metal
and P.C.C. 1:2:4 benching and channel 100 mm thick as
per Standard specification and including cost and
82 BMW-B.05 Constructing 914.4 mm x 457.2 mm (3'0"x1'6") brick in Each 4355.00
CM 1:6 prop. Masonry Inspection chamber up to 914.4
mm (3'0") and fitted with light weight 914.4 mm x 457.2
mm (3'0"x1'6") C.I frame and cover of 40 Kg.
83 BMW-B.06 Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in Each 2626.00
CM 1:6 prop. Masonry. Inspection chamber up to 914.4
mm (3'0") and fitted with light weight 457.2 mm x 457.2
mm (1'6"x1'6") C.I frame and cover of 20 Kg.
84 BMW-B.07 a)Making drainage connection in the existing inspection Each 90.00
86
Sl. SS RATE FOR

No 20010-11
including all repairs
85 BMW-B.08 b) - do - labour charges only Each 50.00
C C.I. PIPES & FITTINGS - AS PER - IS 1729:1979
Supplying and fixing of C.I. Single/ Double Socket soil
pipes ISI marked conforming to IS:1729-1979 of reputed
make with cement caulked joints and fixing as per site
requirements including painting black with Japan paint
and fixing with necessary wooden blocks fixed in the
masonry walls in cement mortar (1½:1) and including
fixing of M.S. clamps if necessary with required no. of
Bombay nails etc., complete
86 BMW-C.01 3" dia (76.2 mm) Single Socket 1 RM 561.00
87 BMW-C.02 4" dia (101.6mm) Single Socket 1 RM 641.00
88 BMW-C.03 6" dia (152.4mm) Single Socket 1 RM 1121.00
89 BMW-C.04 3" dia (76.2 mm) Double Socket 1 RM 613.00
90 BMW-C.05 4" dia (101.6mm) Double Socket 1 RM 700.00
91 BMW-C.06 6" dia (152.4mm) Double Socket 1 RM 1183.00
92 BMW-C.07 Labour charges only for fixing of C.I. Single/ Double 1 RM 150.00
Socket soil pipes of any dia with cement caulked joints
and fixing as per site requirements including painting
black with Japan paint and fixing with necessary wooden
blocks fixed in the masonry walls in cement mortar and
including fixing of M.S. clamps if necessary with required
nails
93 BMW-C.08 Supplying & fixing CI Plain bends Ist quality ISI marked Each 183.00
conforming to IS:1729-1979 with cement caulked joints
and fixing as per site requirements with standard practice
for 3" dia (76.2 mm)
for 4" dia (101.6 mm)
for 6" dia (152.4 mm)
96 BMW-C.11 Supplying & fixing CI Plug (Door) bends Ist quality ISI Each 247.00
marked conforming to IS:1729-1979 with cement caulked
joints and fixing as per site requirements with standard
practice for 3" dia (76.2 mm)
99 BMW-C.14 Labour charges only for fixing CI Plain/ Plug (Door) bends Each 48.00
with cement caulked joints and fixing as per site
requirements with standard practice
100 BMW-C.15 Supplying and fixing of 76.2 mm (3") CI soil single Each 332.00
junction with plug : conforming to IS:1729-1979 with
87
Sl. SS RATE FOR

No 20010-11
cement caulked joints and fixing
103 BMW-C.18 Supplying and fixing of 76.2 mm (3") CI soil plain single Each 286.00
junction : conforming to IS:1729-1979 with cement
caulked joints and fixing
106 BMW-C.21 Labour charges only fixing CI soil single junctions with Each 65.00
cement caulked joints and fixing as per site requirements
with standard practice
107 BMW-C.22 Supplying and Fixing of 76.2 mm (3") CI soil Double Each 516.00
110 BMW-C.25 Supplying and Fixing of 76.2 mm (3") CI soil plain Double Each 449.00
113 BMW-C.28 Labour charges only fixing CI soil Double junctions with Each 60.00
cement caulked joints and fixing as per site requirements
with standard practice
114 BMW-C.29 Supplying and Fixing of 75mm C.I. Offsets Ist quality Each 220.00
and fixing -for 76.20 mm (3") C.I. Pipe
117 BMW-C.32 Supplying and Fixing of 115 mm C.I. Offsets Ist quality Each 262.00
and fixing - for 76.20 mm (3") C.I. Pipe
88
Sl. SS RATE FOR

No 20010-11
and fixing for 76.20 mm (3") C.I. Pipe
123 BMW-C.38 Labour charges only fixing CI soil Offsets with cement Each 30.00
caulked joints and fixing as per site requirements with
standard practice
124 BMW-C.39 Supplying & fixing CI floor traps 1st quality ISI marked Each 300.00
conforming to IS:1729-1979 with C.P. Grating fixing with
white cement as per site requirements with standard
practice for 100 mm dia Inlet- 75 mm (3") outlet pipe
125 BMW-C.40 Supplying & fixing CI floor traps 1st quality ISI marked Each 358.00
practice for 100 mm dia Inlet - 100 mm (4") outlet pipe
126 BMW-C.41 Supplying & fixing CI Nahany traps 1st quality ISI marked Each 243.00
practice for 100 mm dia Inlet- 75 mm (3") outlet pipe - 4
Kgs
127 BMW-C.42 Labour charges only for fixing CI Nahany/ Floor traps with Each 39.00
C.P. Grating fixing with white cement as per site
requirements with standard practice
128 BMW-C.43 Boxing of Nahany traps in RCC floors Each 127.00
129 BMW-C.44 Boxing of W.C Trap in R.C.C floors Each 254.00
130 BMW-C.45 Supplying & fixing CI Collars (double socket) Ist quality ISI Each 134.00
practice for 76.20 mm (3") C.I. Pipe
D VITREOUS CHINAWARE - SANITARY APPLIANCES as per
IS:2556 - 1974
133 BMW-D.01 Supplying & Fixing Indian pattern white glazed W.C 1st Each 700.00
quality ISI marked conforming to IS:2556-Part-3-1981
with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI
Mark: 580 mm Long
134 BMW-D.02 Supplying & Fixing Indian pattern white glazed W.C 1st Each 700.00
89
Sl. SS RATE FOR

No 20010-11
Mark: 630 mm Long
135 BMW-D.03 Labour charges only for fixing Indian pattern W.C with Each 200.00
"P" or "S" trap
136 BMW-D.04 Supplying & Fixing Orissa Pan white glazed W.C 1st Each 915.00
Mark: 580 mm x 440 mm
137 BMW-D.05 Supplying & Fixing Orissa Pan white glazed W.C 1st Each 1000.00
Mark: 630 mm x 450 mm
138 BMW-D.06 Labour charges only Fixing Orissa pan W.C with "P" or Each 250.00
"S" trap
139 BMW-D.07 Supplying & Fixing porcelain foot rest for squatting I.W.C. Pair 170.00
(Rectangular pair) of sizes 250 mm x 125 mm x 15 mm
thick each foot rest 1st quality ISI marked conforming to
IS:2556-Part-10:1974
140 BMW-D.08 Labour charges only for fixing porcelain foot rest for Pair 45.00
squatting I.W.C. (Rectangular pair)
141 BMW-D.09 Providing Brick masonry seat for Orissa pan/ Indian W.C. Each 220.00
using 2nd class bricks as per standard practice
142 BMW-D.10 Providing Cement Concrete Squatting plate for Orissa Each 65.00
pan/ Indian W.C. in P.C.C. 1:2:4 as per standard practice
143 BMW-D.11 Supplying & Fixing low down porcelain flushing tank 10 Each 1700.00
Lit Capacity Hindustan Sanitary ware/ parry/ Neycer with
internal components
144 BMW-D.12 Labour charges only for fixing low down porcelain Each 350.00
flushing tank with internal components
145 BMW-D.13 Supplying and Fixing European Water Closet of 1st quality Each 1200.00
conforming to IS:2556-Part-2-1973 of Hindustan / Neycer
or Parryware make white glazed with 'P' trap
146 BMW-D.14 Supplying and Fixing European Water Closet of 1st quality Each 1250.00
conforming to IS:2556-Part-2-1973 of Hindustan / Neycer
or Parryware make white glazed with 'S' trap
147 BMW-D.15 Labour charges only for fixing European Water Closet Each 175.00
with 'P' or 'S' trap as per standard practice
148 BMW-D.16 Supplying and Fixing best Indian make plastic seat and lid Each 340.00
for European water closets with rubber or plastic Buffers
as per IS 2548-1996
149 BMW-D.17 Labour charges only for fixing plastic seat and lid for Each 50.00
European water closet
150 BMW-D.18 Supply, Installation and commissioning approved make Each 6500.00
floor mounted EWC (suit) CASCADE model 'P' or 'S' trap
with dual flush porcelain cistern fixed on EWC with all
internal parts of dual flush cistern, ultra solid seat cover
of approved make with rubber buffer and cap 15 mm
angle stop cock 450 mm long PVC inter connection pipe
wall flanges all of approved make etc. complete for
finished item of work in all respects: White Colour
90
Sl. SS RATE FOR

No 20010-11
finished item of work in all respects: Coloured - Grade - I/
Grade - II
finished item of work in all respects: Special Colour -
Grade - III
153 BMW-D.21 Supplying & Fixing Indian make Flat Back Wash Hand Each 1750.00
Basin (HSW/Parryware/ Neycer) 1st quality conforming to
IS:2556-Part-4:1972 with waste fittings like rubber plug,
chain, 32 mm nominal size C.P. Fitting with parallel pipe
thread conforming to IS:2963-1979 and fitted with 15
mm nominal bore Chromium Plated Pillar Tap of 1st
quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso
or equivalent complete with standard CI brackets
including wooden block: 660 x 460 mm - Single C.P. Pillar
cock
cock
including wooden block: 630 x 450 mm - Double C.P.
Pillar cock
91
Sl. SS RATE FOR

No 20010-11
cock
Pillar cock
cock
Pillar cock
160 BMW-D.28 Labour charges only for fixing Indian make Flat Back Each 250.00
Wash Hand Basin with waste fittings like rubber plug,
chain, 32 mm nominal size C.P. Fitting Pillar Taps
complete with standard CI brackets including wooden
block
161 BMW-D.29 Supplying and Fixing Pedestal for Wash Hand Basin Each 810.00
(H.S.W / Parry / Earthenware)
162 BMW-D.30 Labour charges only for fixing pedestal for wash hand Each 90.00
basin
163 BMW-D.31 Supplying & Fixing 31.75 mm C.P bottle trap (Heavy type) Each 320.00
Parryware or equivalent
164 BMW-D.32 Labour charges only for fixing bottle trap to the wash Each 35.00
hand basin
165 BMW-D.33 Supplying & Fixing white glazed flat back Bowl urinals of Each 600.00
size 440 mm x 265 mm x 315 mm with internal flushing
rim fixed with screws complete Indian make
(HSW/Parry/Neycer) conforming to IS:2556-1995
166 BMW-D.34 Supplying & Fixing white glazed flat back half stall urinals Each 1800.00
1st quality conforming to IS:2556-1995 with standard C.P.
Spreader of overall size 95 x 95 x 57 mm conforming to
IS:2556-Part6, Sec-6-1974 fixed with screws complete
Indian make (HSW/Parry/Neycer) : 410 x 265 x 305 mm
167 BMW-D.35 Supplying & Fixing white glazed flat back half stall urinals Each 2000.00
92
Sl. SS RATE FOR

No 20010-11
1st quality conforming to IS:2556-1995 with standard C.P.
Spreader of overall size 95 x 95 x 57 mm conforming to
IS:2556-Part6, Sec-6-1974 fixed with screws complete
Indian make (HSW/Parry/Neycer) : 590 x 375 x 390 mm
168 BMW-D.36 Labour charges only Fixing flat back Bowl/ Half stall Each 100.00
urinals with fixing C.P. Spreader and screws complete
169 BMW-D.37 Supplying & Fixing Indian make white glazed vitreous Each 3200.00
china porcelain sink conforming to IS:2556-Part-5-1994
on cantilever brackets with waste fittings like rubber
plug, chain, 32 mm nominal size C.P. Fitting with parallel
pipe thread conforming to IS:2963-1979 : 600 x 400 x 250
170 BMW-D.38 Supplying & Fixing Indian make white glazed vitreous Each 3600.00
china porcelain sink conforming to IS:2556-Part-5-1994
on cantilever brackets with waste fittings like rubber
plug, chain, 32 mm nominal size C.P. Fitting with parallel
pipe thread conforming to IS:2963-1979 : 750 x 450 x 250
171 BMW-D.39 Labour charges only for fixing Vitreous china porcelain Each 250.00
sinks with waste fittings, rubber plug, chain, cantilever
brackets etc.
172 BMW-D.40 a) S & F 609.6 x 457.2 x 254 mm RCC terrazzo finished Each 510.00
sink (or constructed at site with 50.8mm thick) brass
plug and chain including CI cantilever brackets
173 BMW-D.41 b) - do - labour charges only Each 160.00
E TAPS & FAUCETS
174 BMW-E.01 a) S & F 12.7 mm NP stop cock Indian make 400 grams Each 350.00
Seiko/ Senior/ Nice/ Senior/ Nice or equivalent
175 BMW-E.02 b) - do - labour charges only Each 20.00
176 BMW-E.03 a) S & F concealed stop cock 12.7 mm (1/2") Indian Make Each 400.00
400 grams Seiko/ Senior/ Nice or equivalent
178 BMW-E.05 a) S & F angle stop cock 12.7 mm dia first quality Indian Each 350.00
Make 400 grams Seiko/ Senior/ Nice or equivalent
180 BMW-E.07 a) S&F 12.7 mm N.P bib tap Indian make 400 grams Each 300.00
Seiko/ Senior/ Nice or equivalent
182 BMW-E.09 a) S&F 12.7mm N.P bib tap Indian make 300 grams Each 190.00
184 BMW-E.11 a)S & F 31.75 mm brass plumber Union best Indian first Each 50.00
quality
186 BMW-E.13 a) S & F 12.7 mm brass stop cock Indian make 400 grams Each 170.00
188 BMW-E.15 a) S & F 12.7 mm brass stop cock Indian make 300 grams Each 150.00
190 BMW-E.17 a) S & F 12.7 mm brass bib cock Indian make 400 grams Each 170.00
192 BMW-E.19 a) S & F 12.7 mm brass bib cock Indian make 300 grams Each 150.00
194 BMW-E.21 S & F CP Long body bib cock fancy type deluxe 400 grams Each 470.00
12.7 mm dia Indian make Seiko/ Senior/ Nice or
93
Sl. SS RATE FOR

No 20010-11
equivalent
195 BMW-E.22 S & F CP Short body bib cock fancy type deluxe 400 grams Each 450.00
12.7 mm dia Indian make Seiko/ Senior/ Nice or
equivalent
196 BMW-E.23 S & F 12.7mm 400 grams dia high neck pillar cock 1st Each 860.00
quality Indian make Seiko/ Senior/ Nice or equivalent
197 BMW-E.24 a) S & F 12.7 mm 400 grams NP Swan Neck Pillar cock Each 860.00
Seiko/ Senior/ Nice or equivalent
199 BMW-E.26 a) S & F 12.7 mm 400 grams NP Sink cock Seiko/ Senior/ Each 860.00
Nice or equivalent
201 BMW-E.28 S&F 12.7 mm dia NP pillar cock 400 grams Ist quality Each 450.00
Indian make Seiko/ Senior/ Nice or equivalent
202 BMW-E.29 S&F 12.7 mm dia NP push cock Ist quality Each 200.00
203 BMW-E.30 S&F 12.7 mm dia NP lift cock Ist quality Each 175.00
204 BMW-E.31 a)S & F 38.1 mm C.P waste coupling Half or Full Thread Each 175.00
1st Quality Indian make Parryware or equivalent
206 BMW-E.33 a) S & F 31.75 mm PVC bottle trap Each 105.00
208 BMW-E.35 a) S& F 38.1 mm brass plumber union Each 50.00
210 BMW-E.37 a)S & F 19.05 mm 400 grams NP stop cock Indian make Each 450.00
with ISI mark Seiko/ Senior/ Nice or equivalent
F G.I. PIPES & FITTINGS
212 BMW-F.01 S& F GI union 12.7 mm Ist Quality Each 29.00
218 BMW-F.07 S& F GI connector 25.4 mm dia Each 58.00
219 BMW-F.08 S& F 12.7 mm GI 'T' A class Ist quality Each 36.00
220 BMW-F.09 S& F 31.75 mm dia GI bend Ist quality Each 53.00
221 BMW-F.10 S & F 31.75 mm dia GI 'T' 1st Quality Each 52.00
222 BMW-F.11 a) S & F 25.4 mm copper ball cock ith PVC ball Indian Each 303.00
make ISI mark
223 BMW-F.12 b) - do - labour charges only Each 31.00
224 BMW-F.13 a) S & F 19.05 mm copper ball cock ith PVC ball Indian Each 248.00
make ISI mark
226 BMW-F.15 a)S & F 12.7 mm copper ball cock ith PVC ball Indian Each 160.00
make ISI mark
228 BMW-F.17 a) S & F Gunmetal Gate (GM peet) valve as per IS - 778 Each 530.00
Class - I, Indian make heavy type - 25 mm NB Size
94
Sl. SS RATE FOR

No 20010-11
244 BMW-F.33 a) Supplying & fixing Gunmetal (GM) Horizontal Check Each 233.00
(Non return) Valve as per IS-778 I-class heavy duty - 15
mm NB Size
mm NB Size
mm NB Size
mm NB Size
mm NB Size
254 BMW-F.43 a) Supplying & fixing Gunmetal (GM) Vertical Check (Non Each 177.00
return) Valve as per IS-778 I-class heavy duty - 15 mm NB
Size
Size
Size
95
Sl. SS RATE FOR

No 20010-11
Size
Size
Size
266 BMW-F.55 a) S & F Gunmetal (GM) Ball valve with SS Ball and SS Each 276.00
Spindle as per IS - Class - I, Indian make heavy type - 15
mm NB Size
mm NB Size
mm NB Size
mm NB Size
mm NB Size
mm NB Size
278 BMW-F.67 a) S& F 15 mm Nominal Bore GI pipe Light Grade 1 RM 118.00
properties & weight as per IS 1239 ISI mark with GI
fittings including the cost of pipe & its fittings & labour
charges complete
279 BMW-F.68 b) - do - labour charges only 1 RM 29.00
charges complete
charges complete
96
Sl. SS RATE FOR

No 20010-11
charges complete
charges complete
charges complete
290 BMW-F.79 a) S& F 15 mm Nominal Bore GI pipe Medium Grade 1 RM 131.00
charges complete
charges complete
charges complete
charges complete
charges complete
charges complete
302 BMW-F.91 S & F 65 mm Nominal Bore GI pipe Medium Grade 1 RM 575.00
properties & weight as per IS 1239 with GI fittings such as
elbows tees couplings, nipples, plugs including excavation
for trenches and refilling the trenches complete except
for GI bends union and GI connectors with checkout and
socket Tata or Zenith make or equivalent.
303 BMW-F.92 a)S & F 12.7 mm holder bat clamps Each 9.00
97
Sl. SS RATE FOR

No 20010-11
311 BMW-F.100 a) S & F 12.7 x 152.0 mm NP shower rose heavy Each 132.00
317 BMW-F.106 a) S & F 12.7 x 88.9 CP fancy shower Each 215.00
319 BMW-F.108 a) Supplying & fixing 12.7 mm GI drain pipe with plug for Each 30.00
tanks (Mud valve) including making a hole
325 BMW-F.114 a) Taking branch water connection from the existing 25.4 Each 102.00
mm GI pipe including cutting threading, etc, complete
with fitting
327 BMW-F.116 a) Taking branch water connection from the existing Each 58.00
19.05 mm GI pipe including cutting threading, etc,
complete with fitting,
329 BMW-F.118 a) Taking branch water connection from the existing 12.7 Each 44.00
mm GI pipe including cutting threading, etc, complete
with fitting,
331 BMW-F.120 Supplying & fixing leather washers for 12.7 mm bib tap Each 1.00
and stop cock
332 BMW-F.121 Supplying & fixing leather washers for 19.05 mm bib tap Each 3.00
and stop cock
333 BMW-F.122 Supplying & Fixing 12.7 mm fibre washers Each 3.00
334 BMW-F.123 Supplying & Fixing 19.05 mm fibre washers Each 3.00
G PVC PIPES & FITTINGS
335 BMW-G.01 a) Providing & Placing on Terrace (at all floor levels) 1 Lit 4.40
polyethylene water storage tank with Double layer
approved brand & manufacture with cover and suitable
locking arrangement & making necessary holes for inlet &
outlets and over flow pipes but without fittings & base
support for tanks
336 BMW-G.02 b) - do - labour charges only 1 Lit 0.38
337 BMW-G.03 Supply of Plastic storage tank lid with hinges Each 60.00
98
Sl. SS RATE FOR

No 20010-11
338 BMW-G.04 Supply & Fixing 76.2 mm dia PVC elbow Ist quality Each 37.00
339 BMW-G.05 Supply & fixing 31.75 mm dia PVC flexible waste pipe of Each 21.00
914.4 mm length of Ist quality
340 BMW-G.06 Supply & Fixing 38.1 mm dia PVC solid waste pipe outlet Each 70.00
341 BMW-G.07 Supply & fixing Fancy PVC shelf including all fittings Each 168.00
342 BMW-G.08 Supply & fixing of PVC low level system parry ware, slim Each 1150.00
line with internal components & short bend: 10 Litres
capacity Single Flush
line with internal components & short bend: 10 litres
capacity Dual Flush
line with internal components & short bend: 8 Litres
capacity single Flush
345 BMW-G.11 75 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm Each 202.00
- Prince/Sudhakar or any ISI Brand
346 BMW-G.12 90 mm dia 3 M single Socket PVC/SWR pipe - 4 Kg/sq.cm Each 320.00
347 BMW-G.13 110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Each 383.00
Kg/sq.cm - Prince/Sudhakar or any ISI Brand
348 BMW-G.14 75 mm dia 3 M Double Socket PVC/SWR pipe - 4 Each 228.00
351 BMW-G.17 75 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR Each 142.00
pipe - 4 Kg/sq.cm - Prince/Sudhakar or any ISI Brand
354 BMW-G.20 75 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR Each 151.00
357 BMW-G.23 75 mm dia 1219. mm (4'-0") Double Socket PVC/SWR Each 104.00
360 BMW-G.26 75 mm dia 914.4mm (3'-0") Double Socket PVC/SWR pipe Each 88.00
- 4 Kg/sq.cm - Prince/Sudhakar or any ISI Brand
362 BMW-G.28 110 mm dia 914.4mm (3'-0") Double Socket PVC/SWR Each 166.00
99
Sl. SS RATE FOR

No 20010-11
366 BMW-G.32 160 MM dia 3 M Double Socket PVC/SWR pipe - 4 Each 911.00
367 BMW-G.33 75 mm dia 3 M Single Socket PVC/SWR pipe - 6 Kg/sq.cm Each 342.00
368 BMW-G.34 90 mm dia 3 M single Socket PVC/SWR pipe - 6 Kg/sq.cm Each 550.00
369 BMW-G.35 110 mm dia 3 M Single Socket PVC/SWR pipe - 6 Each 655.00
389 BMW-G.55 75 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe Each 39.00
fittings (Prince/Sudhakar or any ISI Brand)
100
Sl. SS RATE FOR

No 20010-11
392 BMW-G.58 75 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe Each 53.00
395 BMW-G.61 75 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings Each 30.00
(Prince/Sudhakar or any ISI Brand)
398 BMW-G.64 75 mm dia - Cleaning Pipe - UPVC/SWR Pipe fittings Each 53.00
401 BMW-G.67 75 mm dia - Single Tee - UPVC/SWR Pipe fittings Each 47.00
404 BMW-G.70 75 mm dia - Single Tee with Door - UPVC/SWR Pipe Each 57.00
407 BMW-G.73 75 mm dia - Double Tee - UPVC/SWR Pipe fittings Each 99.00
410 BMW-G.76 75 mm dia - Double Tee with Door - UPVC/SWR Pipe Each 158.00
413 BMW-G.79 75 mm dia - Single 'Y' - UPVC/SWR Pipe fittings Each 58.00
416 BMW-G.82 75 mm dia - Single 'Y' with Door - UPVC/SWR Pipe fittings Each 75.00
417 BMW-G.83 90 mm dia - Single 'Y' with Door - UPVC/SWR Pipe fittings Each 117.00
101
Sl. SS RATE FOR

No 20010-11
418 BMW-G.84 110 mm dia - Single 'Y' with Door - UPVC/SWR Pipe Each 135.00
419 BMW-G.85 75 mm dia - Double 'Y' - UPVC/SWR Pipe fittings Each 81.00
422 BMW-G.88 75 mm dia - Double 'Y' with Door - UPVC/SWR Pipe Each 104.00
425 BMW-G.91 75 mm dia - Coupler - UPVC/SWR Pipe fittings Each 28.00
428 BMW-G.94 90 x 75 mm dia - Reducer - UPVC/SWR Pipe fittings Each 47.00
431 BMW-G.97 63 mm dia - Vent Cowl - UPVC/SWR Pipe fittings Each 7.00
435 BMW-G.101 40 mm dia - Pipe Clip - UPVC/SWR Pipe fittings Each 9.00
(Prince/Sudhakar or any ISI Brand) - Pipe Clip -
UPVC/SWR Pipe fittings (Prince/Sudhakar or any ISI
Brand)
440 BMW-G.106 110 mm - Pipe Clip - UPVC/SWR Pipe fittings Each 14.00
442 BMW-G.108 P' Trap ( Small without Air vent ) 110 mm - UPVC/SWR Each 149.00
Pipe fittings (Prince/Sudhakar or any ISI Brand)
102
Sl. SS RATE FOR

No 20010-11
443 BMW-G.109 P' Trap ( Small with Air vent ) 110 mm - UPVC/SWR Pipe Each 164.00
444 BMW-G.110 P' Trap (Big with Air vent ) 110 mm - UPVC/SWR Pipe Each 188.00
445 BMW-G.111 P' Trap ( Big without Air vent ) 110 mm - UPVC/SWR Pipe Each 173.00
446 BMW-G.112 Floor Trap (Bell Mouth ) 110 mm - UPVC/SWR Pipe Each 179.00
447 BMW-G.113 Bell Mouth Trap 7 " ( 177.8 mm) - UPVC/SWR Pipe fittings Each 261.00
448 BMW-G.114 4" (101.6 mm) Nahany Trap ( Without Jali with Each 89.00
inlet)UPVC/SWR Pipe fittings (Prince/Sudhakar or any ISI
Brand)
449 BMW-G.115 3" (76.2 mm) Nahany Trap (without Jali without inlet) Each 69.00
UPVC/SWR Pipe fittings (Prince/Sudhakar or any ISI
Brand)
450 BMW-G.116 4" (101.6 mm) Nahany Trap ( without inlet with out Each 85.00
Jali)UPVC/SWR Pipe fittings (Prince/Sudhakar or any ISI
Brand)
451 BMW-G.117 Mini Trap - UPVC/SWR Pipe fittings (Prince/Sudhakar or Each 42.00
any ISI Brand)
452 BMW-G.118 3" (76.2 mm ) Nahany Trap with Jali - UPVC/SWR Pipe Each 81.00
453 BMW-G.119 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe Each 114.00
454 BMW-G.120 4" (101.6) multi floor trap with out Jalli- UPVC/SWR Pipe Each 89.00
455 BMW-G.121 Round Jali - UPVC/SWR Pipe fittings (Prince/Sudhakar or Each 19.00
any ISI Brand)
456 BMW-G.122 Square tile & Jalli - UPVC/SWR Pipe fittings Each 30.00
457 BMW-G.123 Pipe connector ( with LIP ring) - UPVC/SWR Pipe fittings Each 119.00
458 BMW-G.124 Pipe connector ( with out LIP ring) - UPVC/SWR Pipe Each 92.00
459 BMW-G.125 4" (101.6 mm ) Floor Trap - UPVC/SWR Pipe fittings Each 109.00
460 BMW-G.126 5" (127.mm ) floor Trap - UPVC/SWR Pipe fittings Each 116.00
461 BMW-G.127 75 mm dia - Door cap - UPVC/SWR Pipe fittings Each 45.00
464 BMW-G.130 75 mm dia - Socket plug - UPVC/SWR Pipe fittings Each 42.00
467 BMW-G.133 75 mm dia - Rubber ring for Socket - UPVC/SWR Pipe Each 6.00
103
Sl. SS RATE FOR

No 20010-11
470 BMW-G.136 75 mm dia - Door Socket - UPVC/SWR Pipe fittings Each 7.00
473 BMW-G.139 LIP ring 110 mm - UPVC/SWR Pipe fittings Each 55.00
474 BMW-G.140 Rubber Lubricant - 100 Grams Each 23.00
478 BMW-G.144 P' Trap with lip UPVC/SWR Pipe fittings (Prince/Sudhakar Each 236.00
or any ISI Brand)
479 BMW-G.145 50 ml - Solvent Cement Each 12.00
484 BMW-G.150 110mm x 90 mm - Internal Reducer - UPVC/SWR Pipe Each 71.00
485 BMW-G.151 160 mm x 110 mm - Internal Reducer - UPVC/SWR Pipe Each 177.00
486 BMW-G.152 Labour charges for laying, fixing and commissioning the 1 RM 50.00
PVC pipes including couplers/ bends/ tees etc any
diameter including fixing necessary fittings like bends,
plugs, couplers, junctions, tees, etc with solvent jointing
as per standard practice
H CENTRIFUGAL CAST IRON PIPES & FITTNGS AS PER IS:
3989 - 1984
487 BMW-H.01 75 mm dia CI (spun) soils Waste & Ventilating pipe (3 M) Each 1024.00
Double socket
Double socket
492 BMW-H.06 75 mm dia 9'-0" (2743.2 mm) CI (Spun) pipes Each 922.00
498 BMW-H.12 75 mm dia 6'-0" (1828.8 mm) Double Socket CI (Spun) Each 705.00
pipes
499 BMW-H.13 100 mm dia 6'-0" (1828.8 mm) Double Socket CI (Spun) Each 875.00
pipes
104
Sl. SS RATE FOR

No 20010-11
500 BMW-H.14 75 mm dia Cut pipes (pieces) 1 foot (304.8 mm) CI (Spun) Each 244.00
fittings
501 BMW-H.15 100 mm dia Cut pipes (pieces) 1 foot (304.8 mm) CI Each 281.00
(Spun) fittings
502 BMW-H.16 75 mm dia Cut pipes (pieces) 1'.6" (457.2 mm) CI (Spun) Each 350.00
fittings
fittings
fittings
505 BMW-H.19 75 mm dia Cut pipes (pieces ) 2 feet (609.6 mm) CI Each 483.00
(Spun) fittings
(Spun) fittings
(Spun) fittings
(Spun) fittings
(Spun) fittings
(Spun) fittings
(Spun) fittings
512 BMW-H.26 75 mm dia Plain Bend - CI (Spun) fittings Each 251.00
515 BMW-H.29 75 mm dia Door Bend - CI (Spun) fittings Each 260.00
518 BMW-H.32 75 mm dia Plain Bend 45 Degrees - CI (Spun) fittings Each 251.00
521 BMW-H.35 75 mm dia Door Bend 45 Degrees - CI (Spun) fittings Each 260.00
524 BMW-H.38 Horn Bend Plain 101.6 x 50.8 mm (4" x 2") 100 mm dia - Each 512.00
CI (Spun) fittings
525 BMW-H.39 Horn Bend door 101.6 x 50.8 mm (4" x 2") 100 mm dia - Each 597.00
CI (Spun) fittings
526 BMW-H.40 75 mm dia Heel Rest Bend - CI (Spun) fittings Each 268.00
529 BMW-H.43 75 mm dia Single Branch Plain "T" - CI (Spun) fittings Each 337.00
532 BMW-H.46 75 mm dia Single Branch Door "T" - CI (Spun) fittings Each 397.00
535 BMW-H.49 75 mm dia Single Branch plain "Y" - CI (Spun) fittings Each 397.00
105
Sl. SS RATE FOR

No 20010-11
538 BMW-H.52 75 mm dia Single Branch Door "Y" - CI (Spun) fittings Each 436.00
541 BMW-H.55 75 mm dia Double Branch Plain "T" - CI (Spun) fittings Each 461.00
542 BMW-H.56 100 mm dia Double Branch Plain "T" - CI (Spun) fittings Each 621.00
543 BMW-H.57 75 mm dia Double Branch Door "T" - CI (Spun) fittings Each 514.00
544 BMW-H.58 100 mm dia Double Branch Door "T" - CI (Spun) fittings Each 647.00
545 BMW-H.59 75 mm dia Double Branch Plain "Y" - CI (Spun) fittings Each 514.00
546 BMW-H.60 100 mm dia Double Branch Plain "Y" - CI (Spun) fittings Each 647.00
547 BMW-H.61 75 mm dia Double Branch Door "Y" - CI (Spun) fittings Each 542.00
548 BMW-H.62 100 mm dia Double Branch Door "Y" - CI (Spun) fittings Each 702.00
549 BMW-H.63 75 mm dia Shoe Bend - CI (Spun) fittings Each 317.00
552 BMW-H.66 75 mm dia Collar - CI (Spun) fittings Each 217.00
555 BMW-H.69 75 mm dia Cowl - CI (Spun) fittings Each 192.00
558 BMW-H.72 75 mm dia Offset 3" (76.2 mm ) projection - CI (Spun) Each 278.00
fittings
fittings
fittings
561 BMW-H.75 75 mm dia Offset 6" (152.4mm ) projection - CI (Spun) Each 304.00
fittings
fittings
fittings
564 BMW-H.78 75 mm dia Long Door Bend - CI (Spun) fittings Each 639.00
565 BMW-H.79 100 mm dia Long Door Bend - CI (Spun) fittings Each 688.00
566 BMW-H.80 75 mm dia Hand Hole pipe ( Inspection pipe) Each 368.00
569 BMW-H.83 75 mm dia P Traps - CI (Spun) fittings Each 397.00
570 BMW-H.84 100 mm dia P Traps - CI (Spun) fittings Each 545.00
571 BMW-H.85 4" x 3" (101.6 mm x 76.2mm ) P. Traps 100 mm dia - CI Each 625.00
(Spun) fittings
572 BMW-H.86 4" x 3" (101.6 mm x 76.2mm ) Vent Traps 100 mm dia - CI Each 625.00
(Spun) fittings
573 BMW-H.87 4" x 3" (101.6 mm x 76.2mm ) Reducer 75 mm dia - CI Each 388.00
(Spun) fittings
574 BMW-H.88 6" x 4" (152.4 mm x101.6 mm ) Reducer 75 mm dia - CI Each 531.00
(Spun) fittings
575 BMW-H.89 3" x 2" ( 76.2 mm x 50.8 mm ) plain T 75 mm dia - CI Each 332.00
(Spun) fittings
106
Sl. SS RATE FOR

No 20010-11
576 BMW-H.90 3" x 2" ( 76.2 mm x 50.8 mm ) Door T 75 mm dia - CI Each 517.00
(Spun) fittings
577 BMW-H.91 3" x 2" ( 76.2 mm x 50.8 mm ) Plain Y 75 mm dia - CI Each 517.00
(Spun) fittings
578 BMW-H.92 3" x 2" ( 76.2 mm x 50.8 mm ) Door Y 75 mm dia - CI Each 517.00
(Spun) fittings
579 BMW-H.93 4" x 3" (101.6 mm x 76.2mm ) Plain T 75 mm dia - CI Each 517.00
(Spun) fittings
580 BMW-H.94 4" x 3" (101.6 mm x 76.2mm ) Door T 75 mm dia - CI Each 549.00
(Spun) fittings
581 BMW-H.95 4" x 3" (101.6 mm x 76.2mm ) Plain Y 75 mm dia - CI Each 549.00
(Spun) fittings
582 BMW-H.96 4" x 3" (101.6 mm x 76.2mm ) Door Y 75 mm dia - CI Each 586.00
(Spun) fittings
583 BMW-H.97 6" x 4" (152.4 mm x101.6 mm ) Plain T 75 mm dia - CI Each 767.00
(Spun) fittings
584 BMW-H.98 6" x 4" (152.4 mm x101.6 mm ) Door T 75 mm dia - CI Each 830.00
(Spun) fittings
585 BMW-H.99 6" x 4" (152.4 mm x101.6 mm ) Plain Y 75 mm dia - CI Each 878.00
(Spun) fittings
586 BMW-H.100 6" x 4" (152.4 mm x101.6 mm ) Door Y 75 mm dia - CI Each 1074.00
(Spun) fittings
587 BMW-H.101 75 mm dia Plain " T" 27 " (685.8 mm ) Special Types of Each 1113.00
Long Fittings
588 BMW-H.102 100 mm dia - Plain " T" 27 " (685.8 mm ) Special Types of Each 1563.00
Long CI (Spun) fittings
589 BMW-H.103 75 mm dia Door "T" 27" (685.8 mm ) Special Types of Each 1243.00
590 BMW-H.104 100mm dia Door "T" 27" (685.8 mm ) Special Types of Each 1717.00
591 BMW-H.105 75 mm dia Plain " Y" 27" (685.8 mm) Special Types of Each 1243.00
592 BMW-H.106 100mm dia Plain " Y" 27" (685.8 mm) Special Types of Each 1717.00
593 BMW-H.107 75 mm dia Door " Y" 27" (685.8 mm) Special Types of Each 1386.00
594 BMW-H.108 100mm dia Door " Y" 27" (685.8 mm) Special Types of Each 1885.00
I MISCELLANEOUS ITEMS
595 BMW-I.01 a) Supplying & Fixing solder joints up to 50.8 mm dia Each 45.00
596 BMW-I.02 b) - do - labour charges only Each 14.00
597 BMW-I.03 a) Supplying & Fixing solution joints up to 50.8 dia Ist Each 9.00
quality.
599 BMW-I.05 Chiselling the stone masonry wall for fixing of wooden Each 21.00
blocks including finishing as directed by the department
600 BMW-I.06 Chiselling the stone masonry wall and repairs as directed 1 Rm 98.00
by the department.
601 BMW-I.07 Chiselling the brick masonry wall and repairs as directed 1 Rm 21.00
by the department.
602 BMW-I.08 a) S & F NP telephonic shower spray set & valve mixer Each 1599.00
with rest and all fittings complete (ARK/ESSCO or
equivalent make)
107
Sl. SS RATE FOR

No 20010-11
604 BMW-I.10 a) S & F NP shower spray fancy with NP Flexible pipe Each 425.00
606 BMW-I.12 a) S & F NP cover for Nahany trap Each 23.00
608 BMW-I.14 a) Painting the flushing tank with white enamel paint Each 77.00
610 BMW-I.16 S & F internal fittings for flush tank Parryplast wonder Each 484.00
flush or equivalent
611 BMW-I.17 Repairing and over hauling flushing tank Each 64.00
612 BMW-I.18 a) Supplying & Fixing NP chain rubber and plug for basin Each 30.00
614 BMW-I.20 a) S & F 25.4 mm dia & 609.6 mm long aluminium Each 121.00
anodized towel rod with brackets and aluminium screws
616 BMW-I.22 a) S & F 19.04 mm dia & 609.6 mm long aluminium Each 105.00
anodized towel rod with brackets and aluminium screws
618 BMW-I.24 a) S & F 609.6 mm long 127 mm wide plate glass shelf Each 154.00
with superior quality aluminium railing complete with
aluminium screws
620 BMW-I.26 a) S & F 609.6 mm long 127 mm wide plate glass shelf Each 50.00
only
622 BMW-I.28 a) S & F NP soap dish heavy type with NP SCREWS Each 179.00
624 BMW-I.30 a) S &F NP holder brackets with screws Each 36.00
626 BMW-I.32 a) S & F liquid soap container NP metallic with NP Each 179.00
brackets and screws.
628 BMW-I.34 a) S & F 31.75 mm C.P TRAPS Each 231.00
630 BMW-I.36 a) Supplying & fixing 88.9 mm A.C cowls Each 52.00
632 BMW-I.38 a) Supplying & fixing A.C Cowl 63.5 mm dia Each 36.00
634 BMW-I.40 Removing and refixing W.C s Each 169.00
635 BMW-I.41 Removing and refixing wash hand basins of any size with Each 151.00
fittings complete
636 BMW-I.42 a) S & F 76.2 x 101.6 mm teak wood block complete Each 19.00
638 BMW-I.44 Cutting holes in C.C; basement & repairs Labour charges Each 71.00
only
639 BMW-I.45 Cutting holes in stone masonry & basement and repairs Each 48.00
Labour charges only
640 BMW-I.46 Cutting holes in Brick masonry & repairs Labour charges Each 31.00
only
641 BMW-I.47 Cutting holes in RCC slab floor & repairs Labour charges Each 48.00
108
Sl. SS RATE FOR

No 20010-11
only
642 BMW-I.48 a) Supplying & Fixing 12.7 mm PVC connection with Each 74.00
brass union nut C.P coated
644 BMW-I.50 a) S & F 12.7 mm .M.P couplings Each 26.00
646 BMW-I.52 a) S & F 19.05 mm M.P couplings Each 30.00
648 BMW-I.54 a) S& F MP coupling 25.4 mm dia Each 70.00
649 BMW-I.55 a) S & F PVC Rubber adopter for LLC and bend Each 14.00
651 BMW-I.57 a) S& F 31.75 mm Brass union nuts Each 26.00
653 BMW-I.59 a) S& F 38.1 mm Brass union nuts Each 28.00
655 BMW-I.61 a) Constructing Brick masonry chamber over the gully Each 336.00
trap or peet valve and fitted with 304.8 x 228.6 m size CI
frame and hinged cover.
657 BMW-I.63 a) Constructing Brick masonry support for G.I pipe with Each 54.00
C.M 304.8 x 228.6 x228.6 mm size including plastering
and finishing etc. complete.
659 BMW-I.65 a) Supplying & fixing 304.8 x 228.6 mm CI frame & cover Each 88.00
over gully taps
661 BMW-I.67 a) Supplying & fixing CI Nahany trap grating Each 14.00
663 BMW-I.69 a) Supplying & fixing CI gully trap grating Each 36.00
665 BMW-I.71 a) Supplying & fixing valves for brass ball cocks 25.4 mm Each 14.00
dia
667 BMW-I.73 a) Supplying & fixing 12.7 m valve for bib tap or stop Each 13.00
cocks
669 BMW-I.75 a) Supplying & fixing 19.05 m valve for bib tap or stop Each 29.00
cocks
671 BMW-I.77 Removing 12.7 mm GI pipe and refixing the same Mr. 45.00
674 BMW-I.80 Removing 38.1 mm GI pipe and refixing the same Rm 95.00
675 BMW-I.81 Removing 50.8 mm GI pipe and refixing the same Rm 110.00
676 BMW-I.82 Cleaning the W.C with acid and Vim powder Each 30.00
677 BMW-I.83 Cleaning the Urinal with acid and Vim power Each 30.00
678 BMW-I.84 Cleaning the wash basin with acid and Vim powder Each 30.00
679 BMW-I.85 Cleaning the E.W.C with acid and Vim power Each 30.00
680 BMW-I.86 Supplying & fixing 914.4 x 457.2 mm CI man hole frame Each 1430.00
and cover (light weight) 30 Kgs
109
Sl. SS RATE FOR

No 20010-11
681 BMW-I.87 Supplying & fixing 602 x 602 mm CI man hole frame and Each 2130.00
cover (light weight) 30 Kgs
683 BMW-I.89 a) Supplying & fixing CI steps for septic tank. Each 46.00
685 BMW-I.91 a) Supplying & fixing 50.8 cm dia C.I. Man hole frame & Each 920.00
cover for 914.4 mm dia chamber (20 Kgs - Light weight)
687 BMW-I.93 a) Supplying & fixing 50.8 cm dia C.I. Man hole frame & Each 1900.00
cover for 914.4 mm dia chamber (Medium weight) as per
IS:1726 - 40 Kgs
689 BMW-I.95 Cost. 50.8 mm thick RCM baffle wall with 2.267 Kg steel 1 Sqm 185.00
& rabbit wire mesh in CM 1:3 with fine rendering in neat
cement labour charges Only
690 BMW-I.96 a) Cost. 50.8 mm RCC partition wall 1 Sqm 202.00
691 BMW-I.97 b) - do - labour charges only 1 Sqm 31.00
692 BMW-I.98 a) S & F double layer of bamboo matting tarred on both 10 Sqm 461.00
sides.
693 BMW-I.99 b) - do - labour charges only 10 Sqm 88.00
694 BMW-I.100 Removing of 101.6 m or 76.2 mm CI pipe 1 RM 27.00
695 BMW-I.101 a) Supplying & fixing 76.2 mm W.I clamps Each 18.00
697 BMW-I.103 a) Supplying & fixing NP coat hook Each 35.00
699 BMW-I.105 a) Supplying and fixing TV shape mirror with plastic frame Each 378.00
size 609.6 mm x 457 .2 mm
701 BMW-I.107 a) Supplying & fixing GI pipe plug of size 12.7 mm dia Each 7.00
703 BMW-I.109 a) Supplying & fixing 19.06 mm dia GI plug Each 10.00
705 BMW-I.111 a) Supplying and fixing 38.1 mm dia of GI plug Each 53.00
707 BMW-I.113 a) Supplying & fixing 50.8 mm dia of GI PLUG Each 82.00
709 BMW-I.115 a) Supplying & fixing 76.2 mm dia of GI PLUG Each 148.00
711 BMW-I.117 a) Supplying & fixing C.P flange. Each 19.00
713 BMW-I.119 a) Supplying & fixing stainless steel sink size 36" x 18" Each 5066.00
(914.4x457.2mm) 1 mm thick with accessories
715 BMW-I.121 a) Supplying & fixing SINGLE BOWL stainless steel sink Each 3995.00
size 24"x18"x8 " (609.6 x 457.2 x 203.2mm) 1 mm thick
with accessories
717 BMW-I.123 a) Supplying & fixing stainless steel sink size 20" x18" x 8 " Each 3620.00
(508x457.2x203.2mm) 1 mm thick with accessories
110
Sl. SS RATE FOR

No 20010-11
719 BMW-I.125 Supplying & fixing 4 " x 24 " (101.6x609.6mm) white Each 365.00
glazed porcelain channel fixed in brick masonry white
cement pointing.
720 BMW-I.126 Supply & Fixing of steel surgical long elbow action handle Each 730.00
12.7 mm dia bib cock Indian make heavy type including
all materials
721 BMW-I.127 Supply & fixing 2 1/2" (63.5mm) dia Sluice valve ISI mark Each 4000.00
with 2 Nos. flanges, 8 nos, 3/4" dia nuts & bolts and all
necessary washers and packing materials etc. complete
722 BMW-I.128 Supply & fixing porcelain P' trap Each 172.00
723 BMW-I.129 Supplying & fixing oval shape basin white (520x410mm) Each 1830.00
parry or equivalent
724 BMW-I.130 Supply & fixing RCC cover 22" dia with nominal Each 520.00
reinforcement 3 " thick and hooks for lifting
st
725 BMW-I.131 Supply & fixing cp spl. Grating with frame and cover of 1 Each 47.00
quality
726 BMW-I.132 Supply & fixing towel rod (CP) of 24" long and 3/4 " dia Each 292.00
727 BMW-I.133 Supply & fixing of LLC handle set 1st quality Each 58.00
728 BMW-I.134 Mechanical Cleaning of water sumps with pumps & UV 1000 40.00
disinfecting Lit
729 BMW-I.135 Supply & fixing 4" dia CP thimble pipe: 150 mm long Each 305.00
732 BMW-I.138 Supply & fixing CP long bend Each 257.00
733 BMW-I.139 Supply & fixing CP short bend Each 129.00
734 BMW-I.140 Supplying & fixing 15 mm Chromeum plated bib tap with Each 1236.00
flange Jaquar make queen series/ Jupiter Aqua Lines-JAL-
make Nira or equivalent series
735 BMW-I.141 Supply & fixing Chrome plated bib cock cum health faucet Each 3551.00
with 1 m long flexible tube and wall hook of Jaquar make
queen series / Jupiter Aqua Lines-JAL-make Nira or
equivalent series with 7 years warranty
736 BMW-I.142 Supply & fixing Ivory gold bib cock cum health faucet with Each 5883.00
1 m long flexible tube and wall hook of Jaquar make
737 BMW-I.143 Supply & fixing Chrome plated pillar cock Jaquar make Each 1383.00
Queen series / Jupiter Aqua Lines-JAL-make Nira or
738 BMW-I.144 Supply & fixing Ivory gold pillar cock Jaquar make Queen Each 2317.00
series / Jupiter Aqua Lines-JAL-make Nira or equivalent
series with 7 years warranty
739 BMW-I.145 Supply & fixing Chrome plated Angular stop cocks with Each 1339.00
wall flange Jaquar make Queen series / Jupiter Aqua
Lines-JAL-make Nira or equivalent series with 7 years
warranty
740 BMW-I.146 Supply & fixing Ivory gold Angular stop cocks with wall Each 1631.00
flange Jaquar make Queen series / Jupiter Aqua Lines-
JAL-make Nira or equivalent series with 7 years warranty
741 BMW-I.147 Supply & fixing Chrome plated Waste coupling Jaquar Each 322.00
make / Jupiter Aqua Lines-JAL-make Nira or equivalent
111
Sl. SS RATE FOR

No 20010-11
742 BMW-I.148 Supply & fixing of Chrome plated Bottle trap Jaquar make Each 1346.00
/ Jupiter Aqua Lines-JAL-make Nira or equivalent series
with 7 years warranty
743 BMW-I.149 Supply & fixing of Ivory gold Bottle trap Jaquar make / Each 2116.00
Jupiter Aqua Lines-JAL-make Nira or equivalent series
744 BMW-I.150 Supply & Fixing Chrome plated copper pipe 450 mm long Each 322.00
with nuts & washers Jaquar make / Jupiter Aqua Lines-
745 BMW-I.151 Supply & Fixing Ivory gold copper pipe 450 mm long with Each 628.00
nuts & washers Jaquar make / Jupiter Aqua Lines-JAL-
make Nira or equivalent series with 7 years warranty
746 BMW-I.152 Supply and fixing wall mirror with provision for Chrome Each 4074.00
plated over head shower and 115 mm long bend pipe
with wall flange Jaquar make queen series / Jupiter Aqua
warranty
747 BMW-I.153 Supply and fixing wall mirror with provision for Ivory gold Each 7355.00
over head shower and 115 mm long bend pipe with wall
flange Jaquar make queen series / Jupiter Aqua Lines-
748 BMW-I.154 Supply & fixing Chrome plated overhead shower rose Each 1869.00
with revolving joint and 150 mm long swivel shower arm
Jaquar make queen series/ Jupiter Aqua Lines-JAL-make
Nira or equivalent series with 7 years warranty
749 BMW-I.155 Supply & fixing Ivory Gold overhead shower rose with Each 2878.00
revolving joint and 150 mm long swivel shower arm
Jaquar make queen series / Jupiter Aqua Lines-JAL-make
750 BMW-I.156 Supply and Fixing Ivory gold colour Wall Mixer with Each 11392.00
Telephonic shower arrangement with crutch and flexible
pipe Jaquar series for bath tub / Jupiter Aqua Lines-JAL-
751 BMW-I.157 Supply & fixing Bath tub overflow set complete with over Each 1309.00
flow cap, 450 mm Ball chain with rubber plug & union
bend with brass nut Jaquar make, Ivory gold colour. /
752 BMW-I.158 Supply & fixing sink cock with regular swinging spout Each 1967.00
with wall flange chromeplated Jaquar make Queen series
/ Jupiter Aqua Lines-JAL-make Nira or equivalent series
753 BMW-I.159 Supply & fixing Chrome plated soap dish Jaquar make Each 1234.00
754 BMW-I.160 Supply & fixing Ivory Gold soap dish Jaquar make queen Each 1988.00
755 BMW-I.161 Supply & fixing of Chrome plated toilet paper holder Each 1040.00
Jaquar make Queen series / Jupiter Aqua Lines-JAL-make
756 BMW-I.162 Supply & fixing of Ivory Gold toilet paper holder Jaquar Each 1817.00
make Queen series / Jupiter Aqua Lines-JAL-make Nira or
112
Sl. SS RATE FOR

No 20010-11
757 BMW-I.163 Supply & Fixing of Chrome plated Towel ring Jaquar make Each 972.00
758 BMW-I.164 Supply & Fixing of Ivory Gold Towel ring Jaquar make Each 1659.00
759 BMW-I.165 Supply & Fixing of Chrome plated towel coat hook Jaquar Each 711.00
760 BMW-I.166 Supply & Fixing of Ivory Gold towel coat hook Jaquar Each 1458.00
761 BMW-I.167 Supply & Fixing of Ivory gold colour Towel rod 24 " Jaquar Each 2565.00
762 BMW-I.168 Supply & Fixing of Ivory gold colour Tumbler holder Each 1802.00
Jaquar make Queen series, / Jupiter Aqua Lines-JAL-make
763 BMW-I.169 Supply & fixing of Ivory gold colour Glass shelf 22" Jaquar Each 3558.00
make Queen series, / Jupiter Aqua Lines-JAL-make Nira or
764 BMW-I.170 Supply & Fixing of Chrome Finish Bibcock cum Health Each 2527.00
Faucet with 1m long tube and wall hook of Jaquar
Continental series, / Jupiter Aqua Lines-JAL-make Nira or
765 BMW-I.171 Supply & Fixing of Chrome Finish Bibcock Jaquar Each 741.00
766 BMW-I.172 Supply & Fixing of Chrome Finish Pillar cock Jaquar Each 920.00
767 BMW-I.173 Supply & Fixing of Chrome finish Angular stopcock with Each 726.00
wall flange Jaquar Continental series, / Jupiter Aqua
warranty
768 BMW-I.174 Supply fixing of Chrome finish Waste coupling Jaquar Each 322.00
make, / Jupiter Aqua Lines-JAL-make Nira or equivalent
769 BMW-I.175 Supply & Fixing of Chrome finish Bottle Trap Jaquar Each 1420.00
770 BMW-I.176 Supply & Fixing of Chrome Finish / Jupiter Aqua Lines- Each 322.00
copper pipe 450mm long with nuts & washers Jaquar
make,
771 BMW-I.177 Supply & Fixing of Chrome finish Wall Mixer with Each 3252.00
provision for overhead shower and 115mm long bend
pipe with wall flange Jaquar make Continental series, /
772 BMW-I.178 Supply & Fixing of Chrome finish Exclusive overhead Each 1495.00
shower with 190mm long light body shower arm Jaquar
make Continental series, / Jupiter Aqua Lines-JAL-make
113
Sl. SS RATE FOR

No 20010-11
773 BMW-I.179 Supply & Fixing Chrome colour wall mixer with telephonic Each 4590.00
shower arrangement with crutch and telephone shower
with flexible tube Jaquar make Continental series for
bath tub / Jupiter Aqua Lines-JAL-make Nira or
774 BMW-I.180 Supply & Fixing Chrome colour bath tub over flow set Each 942.00
complete with over flow cap, 450mm ball chain with
rubber plug 7 Union bend with brass nuts Jaquar make, /
775 BMW-I.181 Supply & Fixing chrome plated Sink cock with regular Each 1309.00
swinging spout with flange Jaquar make Continental
776 BMW-I.182 Supply & Fixing Chrome Finish soap dish Jaquar make Each 1010.00
777 BMW-I.183 Supply & Fixing of Chrome finish Toilet paper holder Each 741.00
Jaquar make Continental series / Jupiter Aqua Lines-JAL-
778 BMW-I.184 Supply & Fixing of Chrome finish Towel Ring Jaquar make Each 852.00
779 BMW-I.185 Supply & Fixing Chrome finish Double coat hook Jaquar Each 636.00
780 BMW-I.186 Supply & Fixing of Chrome finish towel rail 24'' Jaquar Each 1375.00
781 BMW-I.187 Supply & Fixing of Chrome finish Tumbler holder Jaquar Each 927.00
782 BMW-I.188 Supply & Fixing of Chrome finish Glass shelf 22'' Jaquar Each 1824.00
783 BMW-I.189 Supply & Fixing of Chrome Finish Bibcock cum Health Each 3163.00
Faucet with 1m long tube and wall hook of Jaquar
Florentine(Quarter turn) series, / Jupiter Aqua Lines-JAL-
784 BMW-I.190 Supply & Fixing of Chrome Finish Bibcock Jaquar Each 1010.00
Florentine (Quarter turn)series, / Jupiter Aqua Lines-JAL-
785 BMW-I.191 Supply & Fixing of Chrome Finish Pillar cock Jaquar Each 1010.00
Florentine(Quarter turn) series, / Jupiter Aqua Lines-JAL-
786 BMW-I.192 Supply & Fixing of Chrome finish Angular stopcock with Each 972.00
wall flange Jaquar Florentine( Quarter turn)series, /
787 BMW-I.193 Supply & Fixing of Chrome finish Bottle Trap Jaquar Each 1420.00
788 BMW-I.194 Supply & Fixing of Chrome finish Wall Mixer with Each 3775.00
provision for overhead shower and 115mm long bend
114
Sl. SS RATE FOR

No 20010-11
pipe with wall flange Jaquar make Florentine(Quarter
turn) series, / Jupiter Aqua Lines-JAL-make Nira or
789 BMW-I.195 Supply & Fixing Chrome colour wall mixer with telephonic Each 5868.00
shower arrangement with crutch and telephone shower
with flexible tube Jaquar make Florentine(Quarter turn)
series for bath tub / Jupiter Aqua Lines-JAL-make Nira or
790 BMW-I.196 Supply & Fixing chrome plated Sink cock with regular Each 1563.00
swinging spout with flange Jaquar make
Florentine(Quarter turn) series / Jupiter Aqua Lines-JAL-
791 BMW-I.197 Supply & Fixing of Rose shower with revolving ball joint & Each 1794.00
115mm long shower arm / Jupiter Aqua Lines-JAL-make
792 BMW-I.198 Supply & Fixing chrome plated Metro pole flush valve Each 3140.00
concealed type with cover plate 40mm size of Jaquar
make / Jupiter Aqua Lines-JAL-make Nira or equivalent
793 BMW-I.199 Supply & Fixing Chrome plated Sensotronic sensor faucet Each 12334.00
for wash basin of Jaquar make / Jupiter Aqua Lines-JAL-
794 BMW-I.200 Supply & fixing Chrome plated Sensotronic concealed Each 12334.00
type flushing valve for urinal complete set with
installation box with control cock of Jaquar make/ Jupiter
Aqua Lines-JAL-make Nira or equivalent series with 7
years warranty
795 BMW-I.201 Supply & fixing Chrome plated Auto closing system pillar Each 1944.00
cock for wash basin of Jaquar make / Jupiter Aqua Lines-
796 BMW-I.202 Supply& Fixing Chrome plated Auto Closing system Each 1944.00
Bibcock of Jaquar make / Jupiter Aqua Lines-JAL-make
797 BMW-I.203 S&F KITEC Polyethylene-Aluminium-Polyethylene (PE-AL- 1 RM 134.00
PE) composite pressure pipes conforming to IS-15450-
2004 with UV stabilized, carbon black for hot & cold
water supply, capable to withstand pressure up to 80 C
including all special composite fittings, plastic & brass
blend inserts for elbows, tees, reducers, couplers,
connectors etc complete for external works including
laying pipes, fixing in position, testing and commissioning
etc : 16 mm OD pipe
etc : 20 mm OD pipe
115
Sl. SS RATE FOR

No 20010-11
etc : 25mm OD pipe
etc : 32 mm OD pipe
etc : 40 mm OD pipe
etc : 50 mm OD pipe
connectors etc complete with MS Iron clamps at 1.0 M
spacing including cutting, chasing walls, making good,
etc 16 mm OD pipe
etc 20 mm OD pipe
116
Sl. SS RATE FOR

No 20010-11
etc 25mm OD pipe
etc 32 mm OD pipe
etc 40 mm OD pipe
etc 50 mm OD pipe
809 BMW-I.215 S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE) 1 RM 157.00
composite pressure pipes conforming to IS-15450-2004
with UV stabilized, carbon black for hot & cold water
supply, capable to withstand pressure up to 80 C
connectors etc complete including excavating trenches
up to 1.0 M deep laying pipes, fixing in position, testing,
refilling excavated earth and commissioning etc 16 mm
OD pipe
117
Sl. SS RATE FOR

No 20010-11
OD pipe
refilling excavated earth and commissioning etc 25mm
OD pipe
OD pipe
OD pipe
Supply and Fixing of CPVC Pipes and Fittings to meet the
requirement of ASTM-D 2846 and are produced in CTS
(Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5
pipes are made from idential CPVC compounds having
the same physical Properties for Hot and Cold Water (IS
15778:2007) of Ashirvad / Ajay Flowguard
814 BMW-I.220 15.90mm OD Pipe - SDR 13.5 1 RM 120.00
820 BMW-I.226 15.90mm OD Pipe - SDR 11 1 RM 133.00
118
Sl. SS RATE FOR

No 20010-11
826 BMW-I.232 Supply of 20mm x 1.9mm PN 10/PPR pipe conforming to 1 RM 41.00
DIN Standards 8077/8078
834 BMW-I.240 Supply of 110mm x 10mm PN 10/PPR pipe conforming to 1 RM 1211.00
841 BMW-I.247 Supply of 75mm x 10.3mm PN 16/PPR pipe conforming 1 RM 848.00
to DIN Standards 8077/8082
851 BMW-I.257 Supply of 90mm x 15mm PN 20/PPR pipe conforming to 1 RM 1340.00
119
Sl. SS RATE FOR

No 20010-11
853 BMW-I.259 Supply of 20mm PPR Socket conforming to DIN Standards 1 RM 9.00
8077/8084
8077/8085
8077/8086
8077/8087
8077/8088
8077/8089
8077/8090
8077/8091
861 BMW-I.267 Supply of 110mm PPR Socket conforming to DIN 1 RM 591.00
Standards 8077/8092
862 BMW-I.268 Supply of 32mm PPR Core Flange conforming to DIN Each 35.00
Standards 8077/8086
Standards 8077/8087
Standards 8077/8088
Standards 8077/8089
Standards 8077/8090
Standards 8077/8091
Standards 8077/8092
869 BMW-I.275 Supply of 20mm PPR Elbow conforming to DIN Standards Each 15.00
8077/8084
8077/8085
8077/8086
8077/8087
8077/8088
8077/8089
8077/8090
8077/8091
877 BMW-I.283 Supply of 110mm PPR Elbow conforming to DIN Each 1298.00
Standards 8077/8092
878 BMW-I.284 Supply of 20mm PPR Tee conforming to DIN Standards Each 14.00
120
Sl. SS RATE FOR

No 20010-11
8077/8084
8077/8085
8077/8086
8077/8087
8077/8088
8077/8089
8077/8090
8077/8091
8077/8092
887 BMW-I.293 Supply of 20mm PPR End Cap conforming to DIN Each 6.00
Standards 8077/8084
Standards 8077/8085
Standards 8077/8086
Standards 8077/8087
Standards 8077/8088
Standards 8077/8089
Standards 8077/8090
Standards 8077/8091
Standards 8077/8092
896 BMW-I.302 Supply of 25mm x 20mm PPR Reducer conforming to DIN Each 11.00
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
121
Sl. SS RATE FOR

No 20010-11
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
916 BMW-I.322 Supply of 110mm x 63mm PPR Reducer conforming to Each 509.00
919 BMW-I.325 Supply of 25mm x 20mm x 25mm PPR Reducer Tee Each 30.00
conforming to DIN Standards 8077/8092
122
Sl. SS RATE FOR

No 20010-11
940 BMW-I.346 Supply of 20mm x ½” PPR Female Threaded Adaptor Each 95.00
942 BMW-I.348 Supply of 25mm x ¾” PPR Female Threaded Adaptor Each 171.00
944 BMW-I.350 Supply of 32mm x ¾” PPR Female Threaded Adaptor Each 180.00
945 BMW-I.351 Supply of 32mm x 1" PPR Female Threaded Adaptor Each 277.00
946 BMW-I.352 Supply of 40mm x 1¼” PPR Female Threaded Adaptor Each 411.00
947 BMW-I.353 Supply of 50mm x 1½” PPR Female Threaded Adaptor Each 574.00
948 BMW-I.354 Supply of 63mm x 2" PPR Female Threaded Adaptor Each 763.00
949 BMW-I.355 Supply of 75mm x 2½”PPR Female Threaded Adaptor Each 1471.00
950 BMW-I.356 Supply of 20mm x ½” PPR Male Threaded Adaptor Each 147.00
951 BMW-I.357 Supply of 25mm x ½” PPR Male Threaded Adaptor Each 153.00
952 BMW-I.358 Supply of 25mm x ¾” PPR Male Threaded Adaptor Each 223.00
953 BMW-I.359 Supply of 32mm x ¾” PPR Male Threaded Adaptor Each 233.00
954 BMW-I.360 Supply of 32mm x 1" PPR Male Threaded Adaptor Each 432.00
955 BMW-I.361 Supply of 40mm x 1¼” PPR Male Threaded Adaptor Each 506.00
956 BMW-I.362 Supply of 50mm x 1½” PPR Male Threaded Adaptor Each 708.00
957 BMW-I.363 Supply of 63mm x 2" PPR Male Threaded Adaptor Each 1089.00
123
Sl. SS RATE FOR

No 20010-11
958 BMW-I.364 Supply of 75mm x 2½”PPR Male Threaded Adaptor Each 1742.00
959 BMW-I.365 Supply of 20mm x ½” PPR Female Threaded Elbow Each 102.00
961 BMW-I.367 Supply of 25mm x ¾” PPR Female Threaded Elbow Each 164.00
963 BMW-I.369 Supply of 32mm x ¾” PPR Female Threaded Elbow Each 184.00
964 BMW-I.370 Supply of 32mm x 1" PPR Female Threaded Elbow Each 307.00
965 BMW-I.371 Supply of 20mm x ½” PPR Male Threaded Elbow Each 153.00
967 BMW-I.373 Supply of 25mm x ¾” PPR Male Threaded Elbow Each 222.00
969 BMW-I.375 Supply of 32mm x1" PPR Male Threaded Elbow Each 459.00
970 BMW-I.376 Supply of 20mm x ½” PPR Female Threaded Tee Each 98.00
972 BMW-I.378 Supply of 25mm x ¾” PPR Female Threaded Tee Each 180.00
974 BMW-I.380 Supply of 32mm x ¾” PPR Female Threaded Tee Each 213.00
975 BMW-I.381 Supply of 32mm x 1" PPR Female Threaded Tee Each 299.00
976 BMW-I.382 Supply of 20mm x ½” PPR Male Threaded Teeconforming Each 154.00
977 BMW-I.383 Supply of 25mm x ½” PPR Male Threaded Tee conforming Each 164.00
978 BMW-I.384 Supply of 25mm x ¾” PPR Male Threaded Tee conforming Each 235.00
979 BMW-I.385 Supply of 32mm x ½” PPR Male Threaded Tee conforming Each 240.00
980 BMW-I.386 Supply of 32mm x ¾” PPR Male Threaded Tee Each 254.00
981 BMW-I.387 Supply of 32mm x 1" PPR Male Threaded Tee conforming Each 468.00
982 BMW-I.388 Supply of 20mm x ½” PPR Female Threaded Union Each 395.00
983 BMW-I.389 Supply of 25mm x ¾” PPR Female Threaded Union Each 593.00
984 BMW-I.390 Supply of 32mm x 1” PPR Female Threaded Union Each 791.00
124
Sl. SS RATE FOR

No 20010-11
985 BMW-I.391 Supply of 40mm x 1¼” PPR Female Threaded Union Each 1108.00
986 BMW-I.392 Supply of 50mm x 1½” PPR Female Threaded Union Each 1782.00
987 BMW-I.393 Supply of 63mm x 2” PPR Female Threaded Union Each 2830.00
988 BMW-I.394 Supply of 20mm x ½” PPR Male Threaded Union Each 454.00
989 BMW-I.395 Supply of 25mm x ¾” PPR Male Threaded Union Each 603.00
990 BMW-I.396 Supply of 32mm x 1” PPR Male Threaded Union Each 791.00
991 BMW-I.397 Supply of 40mm x 1¼” PPR Male Threaded Union Each 989.00
992 BMW-I.398 Supply of 50mm x 1½” PPR Male Threaded Union Each 1880.00
993 BMW-I.399 Supply of 63mm x 2” PPR Male Threaded Union Each 3167.00
994 BMW-I.400 Supply of 20mm PPR Union conforming to DIN Standards Each 86.00
8077/8092
8077/8092
8077/8092
997 BMW-I.403 Supply of 20mm PPR Ball Valve conforming to DIN Each 158.00
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
Standards 8077/8092
1005 BMW-I.411 Supply of 20mm PPR Clamp conforming to DIN Standards Each 9.00
8077/8092
8077/8092
8077/8092
8077/8092
1009 BMW-I.415 Labour charges for laying, joining, welding, fixing and 1 RM 20.00
commissioning the PPR pipes including all specials such
as couplers/ bends/ tees etc including fixing necessary
fittings like bends, plugs, couplers, junctions, tees, etc
125
Sl. SS RATE FOR

No 20010-11
with welding the joint as per standard practice - up to 40
mm dia
1010 BMW-I.416 Labour charges for laying, joining, welding, fixing and 1 RM 35.00
commissioning the PPR pipes including all specials such
as couplers/ bends/ tees etc including fixing necessary
fittings like bends, plugs, couplers, junctions, tees, etc
with welding the joint as per standard practice - above 40
mm dia
NOTE
1 All the items to be used on work are of first quality & ISI and as approved by the Engineer In charge of
the work.
2 Rates given above are:
a) Rate for finished item of work
b) Labour charges only
3 RATES
a) Supply Rates for all the materials are based on market rates plus Sales Tax/ Material VAT.
b) Works Contract VAT for General/ Composition Scheme on finished items may be allowed as
applicable.
4 LABOUR Labour charges are increased based on proposals and market rates
5 Coloured porcelain items: 50% extra may be allowed on basic cost of white porcelain items excluding
fittings
6 SOR Rates for Sanitary & water supply items are purely for guidance for the officers for preparation of
estimates vide Para 113 of APPWD code. Authority who prepares the estimate is however responsible
for proper rates as envisaged in Para 45 of APPWD code.
LEGEND
"BMW" -X.XX "BMW" for Water Supply & Sanitary items
XXX-"A".XX "A" for Name of the Section
XXX-X."01" "01" for Serial Number of the Item
126
Electrical Items (Building SoR-2010-11)
ELECTRICAL ITEMS
127
ELECTRICAL ITEMS
SL. BUILDING SOR:2009-10 PAGE NOS
NO. INDEX FOR ELECTRICAL ITEMS FROM TO
PREAMBLE 126 127
SECTION - 1
1.1 M.S.CONDUIT PIPES 128 129
1.2 PVC CONDUIT PIPES 129 130
1.3 METAL BOXES 130 130
1.4 T.W. BOARDS 130 131
1.5 PVC INSULATED COPPER FLEXIBLE CABLES 131 133
1.6 SERVICE MAINS AND LT OH LINES 133 134
1.7 FLUSH TYPE SWITCHES AND ACCESSORIES 134 135
1.8 MINI MODULAR SWITCHES AND ACCESSORIES 135 136
1.9 MODULAR SWITCHES AND ACCESSORIES 136 139
SECTION - 2
2.1 PANEL MOUNTING SWITCH DISCONNECTOR FUSE UNITS 139 140
2.2 ON LOAD CHANGE OVER SWITCHES. (OPEN EXECUTION) 140 141
2.3 CHANGE OVER SWITCHES IN SS ENCLOUSURE. 141 141
2.4 REWIRABLE / DOUBLE BREAK SWITCHES IN SS ENCLOSURE. 141 142
2.5 HRC FUSE LINKS (BOLTED TYPE) 142 142
2.6 PORCELAIN REWIRABLE FUSE UNITS. 142 142
2.7 VOLTAGE SURGE PROTECTORS 142 142
2.8 PANEL MOUNTING MCCB's / ACB's 143 144
2.9 MCB's 144 145
2.91 ISOLATORS 145 146
2.92 RCCB's 146 147
2.93 MCB DISTRIBUTION BOARDS 147 151
SECTION - 3
3.1 STREET LIGHT LUMINAIRES 151 154
3.2 POST TOP LANTERN LUMINAIRES 154 155
3.3 ACCESSORIES FOR MV / SV / MH LUMINAIRES 155 156
3.4 LAMPS 156 158
3.5 NATURE SWITCHES 158 159
3.6 INTERNAL LUMINAIRES 159 165
3.7 FLUORESCENT / CFL LAMPS 165 167
3.8 ENERGY CONSERVING LUMINAIRES. 167 168
3.9 LED LUMINAIRES. 168 173
SECTION - 4
4.1 U.G. CABLES 173 176
4.2 CABLE GLANDS 176 177
4.3 LUGS 177 178
4.4 CABLE JOINTS 178 181
4.5 CABLE TRAYS 181 182
SECTION - 5
5.1 FANS 182 183
5.2 WATER HEATERS 183 183
5.3 ACCESSORIES FOR WATER HEATERS 183 183
5.4 ACCESSORIES FOR MOTORS 183 183
5.5 REPAIRS TO AIR CONDITIONERS 186 190
5.6 REPAIRS TO MOTORS. 190 191
SECTION - 6
6.1 SWAGED / OCTOGANAL POLES AND ACCESSORIES. 191 195
6.2 CONTROL PANEL 195 195
6.3 METERING EQUIPMENT 195 196
6.4 SUB STATION EQUIPMENT 196 198
6.5 PROTECTIVE GEAR 198 199
SECTION – 7
7.1 NET WORKING 199 200
SECTION – 8
8.1 MISCELLANIOUS ITEMS 200 202
SECTION –9
9.1 WIRELESS FIRE ALARM 202 202
9.2 ADDRESSABLE FIRE ALARM 202 205
9.3 CONVENTIONAL FIRE ALARM 205 207
9.4 FIRE EXTINGUISHERS 207 210
SECTION –108
10.1 GENERATORS 210 214
128
PREAMBLE TO ELCTRICAL SOR 2010-11.
1. The area allowances in case of Corporation, Municipalities, Jail Compounds, Agency & Tribal areas
and Industrial areas have to be followed as per prevailing Common SOR.
2. As per the rule 45 under Indian Electricity Rules the Electrical contractor is solely responsible for
both quality and quantity. Proposing specific make in the estimate from the SOR is within the scope
of concerned field officers based on the necessity and availability of materials in such areas.
3. In case of stair case point wiring where two way switch control is necessary, an extra at 50 %
excess over each point shall be allowed.
4. Where ever the light/fan point is provided at height/length of 15 feet and above, then an extra of
50% over the point rates shall be allowed.
5. The rates for common civil items including lab our rates have to adopt from prevailing civil SOR.
6. The rates for all types of lighting fixtures proposed are inclusive of all taxes such as Sales Tax,
Excise duty etc., but without cost of tubes and bulbs .
7. The Government instructions for usage of energy efficient luminaries have to invariably follow
while proposing luminaries in the estimates.
8. The rates for items such as Lifts, Transformers, Generators, Refrigerators / A.C. plants / Water
coolers etc., have to be invariable followed based on the prevailing market rates, since the rates and
specification varies from manufacturer to manufacturer considerably. Hence, rates for these items
are not incorporated in the schedule. However, relevant data without rates is provided in the
standard schedule data for electrical works.
9. The rates for steel items such as M.S. poles, M.S. iron, G.I. pipes and its accessories shall be as per
the rates approved by the Government/Steel India authority/ Prevailing SOR for Buildings List price
from reputed firms etc., from time to time.
10. In case of any addition to the proposed SOR, the approval has to be obtained from the Chief
Engineer (R&B) Buildings through the Superintending Engineer (R&B) Electrical circle. Temporary
approvals which are under relevant specifications of the BIS/ISO/ISI can be given by the
Superintending Engineer (R&B) Electrical/Executive Engineer (R&B) Electrical.
11. The Superintending Engineer (R&B) Electrical will review the performance over the quality of the
makes proposed in the SOR from time to time and in case any inferior quality observed the same
shall be brought to the notice of the Chief Engineer (R&B) Buildings to consider for deletion from the
list.
12. The schedule of rates is only for guidance of officers for preparation of estimates as per the Para
113 of APPWD code. The authority that sanctioned the estimate is however responsible for adopting
the proper rates in the estimates as envisaged in para 45 of APPWD code.
SECTION NO.1
This section contains basic requirements for M.S./PVC conduit and its accessories as well as
switches and its accessories. Except mini modular switches and accessories, all the items in this
section are increased within 3%. The cost of the cover frames for mini modular switches was not
included in previous SOR. Now it is rectified. In view of fire accidents took place in the
A.P.Secretariat and high Court buildings, EBXL flexible copper cables are incorporated in the draft
SOR 2010 - 11.
SECTION NO.2
129
This section contains the switch gear such as panel mounting switch disconnector fuse
units, Changeover Switches, Fuses, MCBs and DBs etc. Except panel mounting switches and
rewirable fuse units, all the rates are increased due to tax variation. The cost for panel mounting
switches and rewiable switch are increased and the rates are finalized based on the price list of
reputed MNC companies.
SECTION NO.3
This section contains the luminaires and lamps such as internal and external fixtures
including CFL and LED luminaires with lamps and accessories. The rates are finalized based on price
lists of various firms. The Rates for Post Top Lantern are decreased by 11.98% less, on SOR 2009-10.
SECTION NO.4
This chapter consists of LT and H.T. alluminium cables including accessories like Glands,
Alluminium / Copper lugs including cable end terminations. The rates for UG cables are increased by
6% over the existing rates in SOR 2009-2010.
SECTION NO.5
This section contains the ceiling Fans, Exhaust Fans, Water heaters, Star rated AC Units and
Motors including accessories. The rates for water heaters are decreased by 0.72%.
SECTION NO.6
This section contains swaged / Octogonal / Conical Poles including High Mast. All the items
of Poles proposed in previous SOR are reviewed and updated. The over all rates are decreased by
11.30% on the SOR 2009-2010.
SECTION NO.7
This section contains Networking wires, switches and its accessories. There is no change or
increase of rates.
SECTION NO.8
This section contains miscellaneous items. There is no change or increase of rates. In this
chapter certain items such as clamps for fixing of cables on walls etc are proposed in the draft SOR
2010-11.
SECTION NO.9
This section contains FIRE Alarm system, detection and extinguishers which are newly
proposed in this SOR so as to meet the minimum requirement in multi storied buildings.
SECTION NO.10
In the SOR 2001-2011 the GENERATOR section was incorporated but in subsequent SOR this
item was deleted. However again included in this SOR so as to avoid discrepancy in proposing the
specification and rates.
130
SL. SS RATE for

ITEM CODE DESCRIPTION OF ITEM
NO. 2010-11
1 2 3 4 5
SECTION - 1
1.1 M.S. CONDUIT PIPES
1 ELEC-1.1.1 Supply of ISI, 20mm dia, 16 guage thickness MS 1 Mtr 60.00
conduit pipe of makes NAI / Bharath / GB.
5 ELEC-1.1.5 Supply of ISI, 50mm dia,16 guage thickness MS 1 Mtr 150.00
6 ELEC-1.1.6 Supply of 19 / 20 mm MS Junction box normal range 1 No 20.00
big size long neck.
7 ELEC-1.1.7 Supply of 25 mm MS Junction box normal range big 1 No 20.00
size long neck.
size long neck.
9 ELEC-1.1.9 Supply of 40 / 38 mm MS Junction box normal range 1 No 62.00
big size long neck.
size long neck.
11 ELEC-1.1.11 Supply of 25/20mm.MS Junction deep box. 1 No 32.00
12 ELEC-1.1.12 Supply of 32mm.MS Junction deep box. 1 No 75.00
13 ELEC-1.1.13 Supply of 40mm.MS Junction deep box. 1 No 77.00
14 ELEC-1.1.14 Supply of 19/20mm MS Inspection Bends. 1 No 18.00
15 ELEC-1.1.15 Supply of 25mm MS Inspection Bends. 1 No 18.00
17 ELEC-1.1.17 Supply of 40/38mm MS Inspection Bends. 1 No 56.00
19 ELEC-1.1.19 Supply of 19/20mm MS Inspection Tee. 1 No 19.00
20 ELEC-1.1.20 Supply of 25mm MS Inspection Tee. 1 No 20.00
22 ELEC-1.1.22 Supply of 40/38mm MS Inspection Tee. 1 No 62.00
24 ELEC-1.1.24 Supply of 19/20mm MS Inspection Elbow. 1 No 17.00
25 ELEC-1.1.25 Supply of 25mm MS Inspection Elbow. 1 No 17.00
27 ELEC-1.1.27 Supply of 40/38mm MS Inspection Elbow. 1 No 54.00
29 ELEC-1.1.29 Supply of MS Inspection 10 Guage G.I. checknut size 100 Nos 173.00
19/20mm.
25mm.
32mm.
40/38mm.
131
SL. SS RATE for

NO. 2010-11
50mm.
34 ELEC-1.1.34 Supply of 19/20mm Saddles with Base. 100 Nos 177.00
35 ELEC-1.1.35 Supply of 25mm Saddles with Base. 100 Nos 185.00
37 ELEC-1.1.37 Supply of 40/38mm Saddles with Base. 100 Nos 325.00
39 ELEC-1.1.39 Supply of 19/20mm 20 guage Saddles. 100 Nos 95.00
40 ELEC-1.1.40 Supply of 25mm 20 guage Saddles. 100 Nos 125.00
42 ELEC-1.1.42 Supply of 40/38mm 20 guage Saddles. 100 Nos 259.00
44 ELEC-1.1.44 Supply of 19/20mm 16 Guage socket coupler. 12 Nos 48.00
45 ELEC-1.1.45 Supply of 25mm 16 Guage socket coupler. 12 Nos 60.00
50 ELEC-1.1.50 Supply of 19mm Ball Socket. 12 Nos 178.00
51 ELEC-1.1.51 Supply of 25mm Ball Socket. 12 Nos 174.00
1.2 PVC CONDUIT PIPES
52 ELEC-1.2.1 Supply of ISI 20mm dia 1.5mm thickness PVC pipe of 1 Mtr 15.00
makes Sudhakar / Maco Plast / Modi.
59 ELEC-1.2.8 Supply of Non - ISI 20mm dia 1.5mm thickness PVC 1 Mtr 12.00
pipe of makes Million Plast / Sudhakar / Durga / Nandi
/ Sunlight / Besto Plast.
132
SL. SS RATE for

NO. 2010-11
66 ELEC-1.2.15 Supply of ISI 19/20mm width and 12.5mm height 1 Mtr 20.00
Casing and Caping of Modi make.
67 ELEC-1.2.16 Supply of ISI 25mm width and 12.5mm height Casing 1 Mtr 25.00
and Caping of Modi make.
68 ELEC-1.2.17 Supply of ISI 32mm width and 12.5mm height Casing 1 Mtr 29.00
and Caping of Modi make.
69 ELEC-1.2.18 Supply of ISI 38/40mm width and 12.5mm height 1 Mtr 50.00
Casing and Caping of Modi make.
70 ELEC-1.2.19 Supply of Non - ISI 19/20mm width and 12.5mm 1 Mtr 15.00
height Casing and Caping of Diamond / Durga make.
71 ELEC-1.2.20 Supply of Non - ISI 25mm width and 12.5mm height 1 Mtr 16.00
Casing and Caping of Diamond / Durga make.
72 ELEC-1.2.21 Supply of Non - ISI 32mm width and 12.5mm height 1 Mtr 21.00
Casing and Caping of Diamond / Durga make.
73 ELEC-1.2.22 Supply of Non - ISI 38/40mm width and 12.5mm 1 Mtr 31.00
height Casing and Caping of Diamond / Durga make.
74 ELEC-1.2.23 Supply of 19/20mm PVC Flexible Pipe. 1 Mtr 3.00
75 ELEC-1.2.24 Supply of 25mm PVC Flexible Pipe. 1 Mtr 4.00
77 ELEC-1.2.26 Supply of 40/38mm PVC Flexible Pipe. 1 Mtr 10.00
79 ELEC-1.2.28 Supply of 19/20mm PVC Flexible Couplings. 1 No 9.00
80 ELEC-1.2.29 Supply of 25mm PVC Flexible Couplings. 1 No 11.00
82 ELEC-1.2.31 Supply of 40/38mm PVC Flexible Couplings. 1 No 25.00
84 ELEC-1.2.33 Supply of 19/20mm PVC Junction Boxes Normal. 1 No 13.00
85 ELEC-1.2.34 Supply of 25mm PVC Junction Boxes Normal. 1 No 15.00
87 ELEC-1.2.36 Supply of 40/38mm PVC Junction Boxes Normal. 1 No 29.00
89 ELEC-1.2.38 Supply of PVC Junction Boxes Deep size 19/20mm. 1 No 17.00
90 ELEC-1.2.39 Supply of PVC Junction Boxes Deep size 25mm. 1 No 20.00
92 ELEC-1.2.41 Supply of PVC Junction Boxes Deep size 40/38mm. 1 No 34.00
94 ELEC-1.2.43 Supply of 19/20mm PVC Bends. 1 No 4.00
95 ELEC-1.2.44 Supply of 25mm PVC Bends. 1 No 5.00
97 ELEC-1.2.46 Supply of 40/38mm PVC Bends. 1 No 15.00
99 ELEC-1.2.48 Cover to PVC junction boxes 1 No 4.00
1.3 HOT DIP GALVANIZED METAL BOXES
100 ELEC-1.3.1 Supply of Metal Boxes of 1 or 2 Module 1 No 50.00
101 ELEC-1.3.2 Supply of Metal Boxes of 3 Module 1 No 70.00
104 ELEC-1.3.5 Supply of Metal Boxes of 8 or 9 Module 1 No 150.00
Horizontal/Vertical.
105 ELEC-1.3.6 Supply of Metal Boxes of 12 Module vertical. 1 No 184.00
1.4 T.W. BOARDS
133
SL. SS RATE for

NO. 2010-11
106 ELEC-1.4.1 Supply of T.W.Board of Size 4" x 4" 1 No 8.00
113 ELEC-1.4.8 Supply of T.W.Deep Box of Size 4" x 4" 1 No 8.00
120 ELEC-1.4.15 Supply of 3 mm thick hylam sheet of Size 4" x 4" 1 No 8.00
127 ELEC-1.4.22 Supply of Sunglass Delux Board of Size 4" x 4" 1 No 12.00
134 ELEC-1.4.29 Supply of Peeta Board of Size 9" x 14" 1 No 44.00
139 ELEC-1.4.34 Supply of No.8 Screws of 12mm. 100 Nos 50.00
142 ELEC-1.4.37 Supply of No.8 Screws of 35/38mm. 100 Nos 80.00
144 ELEC-1.4.39 Supply of No.8 Screws of 63/75mm. 100 Nos 110.00
1.5 COPPER FLEXIBLE CABLES
(AS PER IS:694)
145 ELEC-1.5.1 Supply of 14/0.3mm (1.0 Sqmm) FRLS / HFFR / EBXL 100 Mtrs 910.00
PVC insulated ISI Copper cable of makes Finolex / RR
kabel / Fortune Art EBXL.
134
SL. SS RATE for

NO. 2010-11
152 ELEC-1.5.8 Supply of 14/0.3mm (1.0 Sqmm) FR / FRLS PVC 100 Mtrs 800.00
insulated ISI Copper cable of makes GM / L&T / RPG /
Havells / V-Guard / Power Flex / Polycab / Gold Medal
/ Standard / Milion / Vimal / Sun cab / Paragaon /
Delton.
Delton..
Delton..
Delton..
Delton..
Delton..
Delton..
insulated ISI Copper cable of makes Pawancab / Star /
Milltec / Fine Cab / Payal / Sunlight / Bentec /
Gemscab.
Gemscab.
135
SL. SS RATE for

NO. 2010-11
Gemscab.
Gemscab.
Gemscab.
Milltec / Fine Cab / Payal / Sunlight / Bentec.
Milltec / Fine Cab / Payal / Sunlight / Bentec.
1.6 SERVICE MAINS AND FLAT CABLE OF ISI FOR
SUBMERSIBLE MOTORS.
166 ELEC-1.6.1 Supply of 2.5 Sqmm 3/20 WPSC (Weather Proof 100 Mtrs 650.00
Single Core ) ISI Alluminium Wire Finolex / Polycab /
Gold Medal / Million / Payal / Sun Light / Power Flex.
167 ELEC-1.6.2 Supply of 6 Sqmm 7/18 WPSC (Weather Proof Single 100 Mtrs 1320.00
Core ) ISI Alluminium Wire of makes Finolex / Polycab
/ Gold Medal / Million / Payal / Sun Light / Power Flex.
168 ELEC-1.6.3 Supply of 10 Sqmm WPSC (Weather Proof Single Core 100 Mtrs 1420.00
) ISI Alluminium Wire of makes Finolex / Polycab /
169 ELEC-1.6.4 Supply of 16 Sqmm WPSC (Weather Proof Single Core 100 Mtrs 2375.00
) ISI Alluminium Wire of makes Finolex / Polycab /
170 ELEC-1.6.5 Supply of 6 Sqmm WPTC (Weather Proof Twin Core ) 100 Mtrs 2660.00
ISI Alluminium Wire of makes Finolex / Polycab / Gold
Medal / Million / Payal / Sun Light / Power Flex /
Fortune Art.
Fortune Art.
Fortune Art.
173 ELEC-1.6.8 Supply of 23 / 0060 twin core flat wire of makes 100 Mtrs 900.00
Finolex / Polycab / Gold Medal / Million / Payal / Sun
Light / Power Flex / Fortune Art.
174 ELEC-1.6.9 Supply of 3 Core 1.5 Sqmm Flat Copper cable of ISI for 100 Mtrs 4950.00
Submersible Motors of makes Finolex / Polycab / Gold
Fortune Art.
Fortune Art.
136
SL. SS RATE for

NO. 2010-11
Fortune Art.
Fortune Art.
178 ELEC-1.6.13 Supply of 3 Core 10.0 Sqmm Flat Copper cable of ISI 100 Mtrs 27300.00
for Submersible Motors of makes Finolex / Polycab /
Gold Medal / Million / Payal / Sun Light / Power Flex /
Fortune Art.
1.7 FLUSH TYPE SWITCHES AND ACCESSORIES
179 ELEC-1.7.1 Supply of 6A 1 Way flush type Swich of makes Anchor 1 No 18.00
/ Gold Medal Olive / Million Zoom.
180 ELEC-1.7.2 Supply of 6A 2 Way flush type Swich of makes Anchor 1 No 21.00
181 ELEC-1.7.3 Supply of 6A 2 pin flush type Socket of makes Anchor 1 No 20.00
182 ELEC-1.7.4 Supply of 6A 3/2 pin flush type Socket of makes 1 No 27.00
Anchor / Gold Medal Olive / Million Zoom.
183 ELEC-1.7.5 Supply of 6A flush type Neon Indicator of makes 1 No 20.00
184 ELEC-1.7.6 Supply of 6A Triangle Plug Top of makes Anchor / 1 No 35.00
Gold Medal Olive / Million Zoom.
185 ELEC-1.7.7 Supply of 6A 1 Way flush type Bed Swich / Bell Push of 1 No 21.00
makes Anchor / Gold Medal Olive / Million Zoom.
186 ELEC-1.7.8 Supply of 16A flush type Swich of makes Anchor / 1 No 65.00
187 ELEC-1.7.9 Supply of 16A flush type Socket of makes Anchor / 1 No 65.00
188 ELEC-1.7.10 Supply of 16A flush type Switch Socket combined (2 in 1 No 102.00
one) of makes Anchor / Gold Medal Olive / Million
Zoom.
189 ELEC-1.7.11 Supply of 16A flush type Switch, Socket, Fuse, 1 No 146.00
Indicator combined (5 in one) of makes Anchor / Gold
Medal Olive / Million Zoom.
190 ELEC-1.7.12 Supply of 16A Triangle Plug Top of makes Anchor / 1 No 50.00
191 ELEC-1.7.13 Deleted
192 ELEC-1.7.14 Supply of stepped type Electronic Regulator of makes 1 No 220.00
193 ELEC-1.7.15 Supply of Jumbo Ceiling Rose 3 Plate of makes 1 No 21.00
194 ELEC-1.7.16 Supply of BH / SBH of makes Anchor / Gold Medal 1 No 20.00
Olive / Million Zoom.
195 ELEC-1.7.17 Supply of Pendent Holder / Adopter of makes Anchor 1 No 17.00
196 ELEC-1.7.18 Supply of Telephone Jack with Connector of makes 1 No 48.00
197 ELEC-1.7.19 Supply of TV Antenna Outlet of makes Anchor / Gold 1 No 26.00
Medal Olive / Million Zoom.
198 ELEC-1.7.20 Supply of 15A/10A Flush type Fuse of makes Anchor / 1 No 32.00
Gold Medal / Million / Vimal / Maru.
137
SL. SS RATE for

NO. 2010-11
199 ELEC-1.7.21 Supply of 32A DP Flush type of makes Anchor / Gold 1 No 106.00
Medal / Million.
200 ELEC-1.7.22 Supply of Calling Bell of makes Anchor / Gold Medal 1 No 50.00
/ Million / Vimal / Maru.
201 ELEC-1.7.23 Supply of Buzzer of makes Anchor / Gold Medal / 1 No 45.00
Million / Vimal / Maru.
202 ELEC-1.7.24 Supply of Ding Dong Bell of makes Anchor / Gold 1 No 102.00
Medal / Million / Vimal / Maru.
203 ELEC-1.7.25 Supply of Electronic Musical Bell of makes Anchor / 1 No 240.00
Gold Medal / Million / Vimal / Maru.
204 ELEC-1.7.26 Supply of Remote Bell of makes Anchor / Gold Medal 1 No 450.00
/ Million / Vimal / Maru.
205 ELEC-1.7.27 Supply of MC Holder of makes Anchor / Gold Medal / 1 No 21.00
Million / Vimal / Maru.
207 ELEC-1.7.29 Supply of Spike Guard with 1 No Switch and 4 Nos 1 No 310.00
Sockets of makes Anchor / Gold Medal / Million /
Vimal / Maru.
208 ELEC-1.7.30 Supply of Spike Guard with 4 No Switches and 4 Nos 1 No 410.00
Sockets of makes Anchor / Gold Medal / Million /
Vimal / Maru.
209 ELEC-1.7.31 Supply of 6A 1 Way flush type Swich of makes Milltec 1 No 15.00
/ Vimal opel / Maru Mantero / Starex Smile / CPL.
210 ELEC-1.7.32 Supply of 6A 2 Way flush type Swich of makes Milltec 1 No 19.00
211 ELEC-1.7.33 Supply of 6A 2 pin flush type Socket of makes Milltec / 1 No 15.00
Vimal opel / Maru Mantero / Starex Smile / CPL.
212 ELEC-1.7.34 Supply of 6A 3/2 pin flush type Socket of makes 1 No 20.00
Milltec / Vimal opel / Maru Mantero / Starex Smile /
CPL.
213 ELEC-1.7.35 Supply of 6A flush type Neon Indicator of makes 1 No 18.00
CPL.
214 ELEC-1.7.36 Supply of 6A Triangle Plug Top of makes Milltec / 1 No 28.00
215 ELEC-1.7.37 Supply of 6A 1 Way flush type Bed Swich / Bell Push of 1 No 18.00
makes Milltec / Vimal opel / Maru Mantero / Starex
Smile / CPL.
216 ELEC-1.7.38 Supply of 16A flush type Swich of makes Milltec / 1 No 55.00
217 ELEC-1.7.39 Supply of 16A flush type Socket of makes Milltec / 1 No 55.00
218 ELEC-1.7.40 Supply of 16A flush type Switch Socket combined (2 in 1 No 85.00
one) of makes Milltec / Vimal opel / Maru Mantero /
Starex Smile / CPL.
219 ELEC-1.7.41 Supply of 16A flush type Switch, Socket, Fuse, 1 No 110.00
Indicator combined (5 in one) of makes Milltec / Vimal
opel / Maru Mantero / Starex Smile / CPL.
220 ELEC-1.7.42 Supply of 16A Triangle Plug Top of makes Milltec / 1 No 44.00
221 ELEC-1.7.43 Supply of stepped type Electronic Regulator of makes 1 No 180.00
CPL.
138
SL. SS RATE for

NO. 2010-11
222 ELEC-1.7.44 Supply of Jumbo Ceiling Rose 3 Plate of makes Milltec 1 No 16.00
223 ELEC-1.7.45 Supply of 32A DP Flush type of makes Milltec / Vimal 1 No 85.00
/ Maru / Star.
1.8 MINI MODULAR SWITCHES AND ACCESSORIES
224 ELEC-1.8.1 Supply of 6A 1 Way Mini Modular Switch with Cover 1 No 23.00
Frame of makes GM / Anchor / Gold Medal / Million /
Vimal / Maru / Milltec.
225 ELEC-1.8.2 Supply of 6A 2 Way Mini Modular Switch with Cover 1 No 26.00
226 ELEC-1.8.3 Supply of 6A 2 Pin Mini Modular Socket with Cover 1 No 24.00
227 ELEC-1.8.4 Supply of 6A 3/2 Pin Mini Modular Socket with Cover 1 No 35.00
228 ELEC-1.8.5 Supply of 6A Mini Modular Neon Indicator with Cover 1 No 28.00
229 ELEC-1.8.6 Supply of 6A Mini Modular Bed Switch / Bell Push 1 No 26.00
with Cover Frame of makes GM / Anchor / Gold
Medal / Million / Vimal / Maru / Milltec.
230 ELEC-1.8.7 Supply of 6A 1 Way Mini Modular Switch with Neon 1 No 28.00
Indicator with Cover Frame of makes GM / Anchor /
Gold Medal / Million / Vimal / Maru / Milltec.
231 ELEC-1.8.8 Supply of 6A Mini Modular Bell Push with Neon 1 No 39.00
Indicator with Cover Frame of makes GM / Anchor /
232 ELEC-1.8.9 Supply of 16A Mini Modular Switch with Cover Frame 1 No 80.00
of makes Anchor / Million / Vimal / Maru / Milltec.
234 ELEC-1.8.11 Supply of 16A (2 in one) Mini Modular Switch & 1 No 110.00
Socket combined with Cover Frame of makes Anchor /
Million / Vimal / Maru / Gold Medal / Milltec.
235 ELEC-1.8.12 Supply of 16A (5 in one) Mini Modular Switch, Socket, 1 No 185.00
Fuse and Indicator with Cover Frame of makes GM /
Anchor / Gold Medal / Million / Vimal / Maru /
Milltec.
236 ELEC-1.8.13 Supply of 16A Triangle Top with Cover Frame of 1 No 49.00
makes GM / Anchor / Gold Medal / Million / Vimal /
Maru / Milltec.
238 ELEC-1.8.15 Supply of Mini Modular Stepped type Electronic 1 No 240.00
Regulator with Cover Frame of makes GM / Anchor /
239 ELEC-1.8.16 Supply of Jumbo Ceiling Rose 3 Plate of makes GM / 1 No 25.00
Anchor / Gold Medal / Million / Vimal / Maru /
Milltec.
240 ELEC-1.8.17 Supply of BH / SBH of makes GM / Anchor / Gold 1 No 35.00
Medal / Million / Vimal / Maru / Milltec.
241 ELEC-1.8.18 Supply of Mini Modular Telephone Jack with 1 No 54.00
Connector with Cover Frame of makes GM / Anchor /
139
SL. SS RATE for

NO. 2010-11
242 ELEC-1.8.19 Supply of Mini Modular TV Antenna Outlet with 1 No 35.00
Cover Frame of makes GM / Anchor / Gold Medal /
Million / Vimal / Maru / Milltec.
243 ELEC-1.8.20 Supply of 16A/10A Mini Modular Flush Fuse with 1 No 40.00
Cover Frame of makes GM / Anchor / Gold Medal /
Million / Vimal / Maru / Milltec.
1.9 MODULAR SWITCHES AND ACCESSORIES
244 ELEC-1.9.1 Supply of 6A / 10A 1 Way Modular Switch of GM / 1 No 92.00
Legrand Mossaic / L & T / North West / M K / Salzer /
Indo Simon.
Indo Simon.
246 ELEC-1.9.3 Supply of 6A / 10A 2 Pin Modular Socket of GM / 1 No 93.00
Indo Simon.
247 ELEC-1.9.4 Supply of 6A / 10A 3/2 Pin Modular Socket of GM / 1 No 141.00
Indo Simon.
248 ELEC-1.9.5 Supply of 6A / 10A Modular Switch with Neon 1 No 117.00
Indicator of GM / Legrand Mossaic / L & T / North
West / M K / Salzer / Indo Simon.
249 ELEC-1.9.6 Supply of 6A / 10A Modular Bell Push with Neon 1 No 137.00
250 ELEC-1.9.7 Supply of 16A / 10A Modular Flush Fuse with Neon 1 No 126.00
Indo Simon.
Indo Simon.
253 ELEC-1.9.10 Supply of 20A 1 Way Modular Switch with Indicator 1 No 138.00
of GM / Legrand Mossaic / L & T / North West / M K /
Salzer / Indo Simon.
254 ELEC-1.9.11 Supply of 20A Modular Socket of GM / Legrand 1 No 188.00
Mossaic / L & T / North West / M K / Salzer / Indo
Simon.
255 ELEC-1.9.12 Supply of 16A/6A 1 way Combi Socket Modular Socket 1 No 196.00
of GM / Legrand Mossaic / L & T / North West / M K /
256 ELEC-1.9.13 Supply of 16A Triangle Top of GM / Legrand Mossaic / 1 No 158.00
L & T / North West / M K / Salzer / Indo Simon.
257 ELEC-1.9.14 Supply of 400W Electronic Regulator of Modular of 1 No 473.00
GM / Legrand Mossaic / L & T / North West / M K /
258 ELEC-1.9.15 Supply of 600W Electronic Regulator of Modular of 1 No 546.00
259 ELEC-1.9.16 Supply of Modular Telephone jack with Connector of 1 No 100.00
140
SL. SS RATE for

NO. 2010-11
260 ELEC-1.9.17 Supply of Modular TV Antenna outlet of GM / 1 No 98.00
Indo Simon.
261 ELEC-1.9.18 Supply of 6A / 10A 1 Way Modular Switch of Crabtree 1 No 63.00
/ Feno Swtch / Toyoma / Fortune Art / Million / Gold
Medal / Vimal / Anchor Roma.
262 ELEC-1.9.19 Supply of 6A / 10A 2 Way Modular Switch of Crabtree 1 No 75.00
263 ELEC-1.9.20 Supply of 6A / 10A 2 Pin Modular Socket of Crabtree / 1 No 64.00
Feno Swtch / Toyoma / Fortune Art / Million / Gold
264 ELEC-1.9.21 Supply of 6A / 10A 3/2 Pin Modular Socket of 1 No 93.00
Crabtree / Feno Swtch / Toyoma / Fortune Art /
Million / Gold Medal / Vimal / Anchor Roma.
265 ELEC-1.9.22 Supply of 6A / 10A Modular Switch with Neon 1 No 75.00
Indicator of Crabtree / Feno Swtch / Toyoma /
Fortune Art / Million / Gold Medal / Vimal / Anchor
Roma.
266 ELEC-1.9.23 Supply of 6A / 10A Modular Bell Push with Neon 1 No 90.00
Roma.
267 ELEC-1.9.24 Supply of 16A / 10A Modular Flush Fuse with Neon 1 No 83.00
Roma.
268 ELEC-1.9.25 Supply of 16A / 20A 1 Way Modular Switch of 1 No 83.00
269 ELEC-1.9.26 Supply of 16A / 20A 2 Way Modular Switch of 1 No 95.00
270 ELEC-1.9.27 Supply of 20A 1 Way Modular Switch with Indicator 1 No 91.00
of Crabtree / Feno Swtch / Toyoma / Fortune Art /
271 ELEC-1.9.28 Supply of 20A Modular Socket of Crabtree / Feno 1 No 133.00
Swtch / Toyoma / Fortune Art / Million / Gold Medal
/ Vimal / Anchor Roma.
272 ELEC-1.9.29 Supply of 16A/6A 1 way Combi Socket Modular Socket 1 No 135.00
273 ELEC-1.9.30 Supply of 16A Triangle Top of Crabtree / Feno Swtch / 1 No 65.00
Toyoma / Fortune Art / Million / Gold Medal / Vimal /
Anchor Roma.
275 ELEC-1.9.32 Supply of Electronic Regulator of Modular of Crabtree 1 No 375.00
276 ELEC-1.9.33 Supply of Modular Telephone jack with Connector of 1 No 65.00
277 ELEC-1.9.34 Supply of Modular TV Antenna outlet of Crabtree / 1 No 64.00
141
SL. SS RATE for

NO. 2010-11
278 ELEC-1.9.35 Supply of 1 or 2 Modular Cover Frame of GM / 1 No 65.00
Legrand Mossaic / L & T / North West / M K / Salzer.
279 ELEC-1.9.36 Supply of 3 Modular Cover Frame of GM / Legrand 1 No 77.00
Mossaic / L & T / North West / M K / Salzer.
282 ELEC-1.9.39 Supply of 8 Modular Horizontal / Vertical Cover Frame 1 No 172.00
of GM / Legrand Mossaic / L & T / North West / M K
/ Salzer.
283 ELEC-1.9.40 Supply of 12 Modular Vertical Cover Frame of GM / 1 No 210.00
Legrand Mossaic / L & T / North West / M K / Salzer.
284 ELEC-1.9.41 Supply of 1 or 2 Modular Cover Frame of Crabtree / 1 No 56.00
285 ELEC-1.9.42 Supply of 3 Modular Cover Frame of Crabtree / Feno 1 No 69.00
288 ELEC-1.9.45 Supply of 8 Modular Horizontal / Vertical Cover Frame 1 No 137.00
289 ELEC-1.9.46 Supply of 12 Modular Vertical Cover Frame of 1 No 167.00
SECTION - 2
2.1 PANEL MOUNTING SWITCH DISCONNECTOR FUSE
UNITS
(SDFU / FSDU) AS PER IS: 13947
290 ELEC-2.1.1 Supply of 32A TPN Switch Disconnector Fuse Unit 1 No 1351.00
Cubical type without fuses of makes L&T / G E / C&S /
ABB / SIEMENS
ABB / SIEMENS
ABB / SIEMENS
ABB / SIEMENS
ABB / SIEMENS
ABB / SIEMENS
142
SL. SS RATE for

NO. 2010-11
ABB / SIEMENS
Cubical type without fuses of makes Standard /
Crystal / Havells / HPL.
2.2 ON LOAD CHANGEOVER SWITCHES
(OPEN EXECUTION)
AS PER IS:13947
304 ELEC-2.2.1 Supply of 63A 4 Pole Change Over Switch on Load 1 No 3938.00
with open Execution of makes HPL / G E / L & T / ABB
/ SIEMENS
/ SIEMENS
/ SIEMENS
/ SIEMENS
/ SIEMENS
/ SIEMENS
/ SIEMENS
/ SIEMENS
with open Execution of makes Standard / Crystal /
Havells.
143
SL. SS RATE for

NO. 2010-11
Havells.
Havells.
Havells.
Havells.
Havells.
Havells.
Havells.
2.3 CHANGE OVER SWITCHES IN SS ENCLOUSURE AS PER
IS:13947
320 ELEC-2.3.1 Supply of 32A 240V DP Changeover Switch in sheet 1 No 1255.00
steel enclosure of makes L & T / G E / C & S / HPL /
Havells / ABB / SIEMENS
321 ELEC-2.3.2 Supply of 63A 415V FP Changeover Switch in sheet 1 No 4375.00
323 ELEC-2.3.4 Supply of 32A 240V DP Changeover Switch in sheet 1 No 723.00
steel enclosure of makes Standard / Crystal / Million /
Sputnik / Sunlight / / Bentec / Gold Medal / Star.
Sputnik / Sunlight / / Bentec / Gold Medal / Star.
Sputnik / Sunlight / / Bentec / Gold Medal.
2.4 REWIRABLE / DOUBLE BREAK SWITCHES IN SS
ENCLOSURE
AS PER IS:13947
326 ELEC-2.4.1 Supply of 32A 240V SPN Rewirable Fuse Switch in SS 1 No 936.00
enclosure of makes L & T / G E / C & S / HPL / Havells /
ABB / SIEMENS
327 ELEC-2.4.2 Supply of 32A 415V TPN Rewirable Fuse Switch in SS 1 No 1446.00
ABB / SIEMENS
ABB / SIEMENS
144
SL. SS RATE for

NO. 2010-11
ABB / SIEMENS
330 ELEC-2.4.5 Supply of 100A 415V TPN Double Break Switch in SS 1 No 6190.00
enclosure without fuses of makes L & T / G E / C & S /
HPL / Havells / ABB / SIEMENS
enclosure without fuses of makes L & T / G E / C & S /
HPL / Havells / ABB / SIEMENS
332 ELEC-2.4.7 Supply of 32A 240V SPN Rewirable Fuse Switch in SS 1 No 620.00
enclosure of makes Standard / Crystal / Gold Medal /
Million / Sputnik / Sunlight / Bentec / Star.
enclosure without fuse of makes Standard / Crystal /
Gold Medal / Million / Sputnik / Sunlight / Bentec.
enclosure without fuse of makes Standard / Crystal /
Gold Medal / Million / Sputnik / Sunlight / Bentec.
2.5 HRC FUSE LINKS (BOLTED TYPE)
338 ELEC-2.5.1 Supply of up to 32A HRC Fuse Links of makes L & T / G 1 No 45.00
E / C & S / Standard / HPL / Havells.
339 ELEC-2.5.2 Supply of 32A to 63A HRC Fuse Links of makes L & T / 1 No 70.00
G E / C & S / Standard / HPL / Havells.
340 ELEC-2.5.3 Supply of 125A to 200A HRC Fuse Links of makes L & 1 No 225.00
T / G E / C & S / Standard / HPL / Havells.
341 ELEC-2.5.4 Supply of 250A to 350A HRC Fuse Links of makes L & 1 No 330.00
T / G E / C & S / Standard / HPL / Havells.
342 ELEC-2.5.5 Supply of 400A HRC Fuse Links of makes L & T / G E / 1 No 640.00
C & S / Standard / HPL / Havells.
343 ELEC-2.5.6 Supply of 630A HRC Fuse Links of makes L & T / G E / 1 No 1295.00
C & S / Standard / HPL / Havells.
2.6 PORCELAIN REWIRABLE FUSE UNITS.
344 ELEC-2.6.1 Supply of 32A 240V Porcelain Rewirable Fuse Units of 1 No 90.00
makes Gold Medal / HPL / Vimal / Standard / Crystal /
Million / Sputnik / Bentec / Sunlight / Star.
347 ELEC-2.6.4 Supply of 100A 415V Porcelain Rewirable Fuse Units 1 No 440.00
of makes Gold Medal / HPL / Vimal / Standard /
Crystal / Million / Sputnik / Bentec / Sunlight.
145
SL. SS RATE for

NO. 2010-11
with extension strip of makes Gold Medal / HPL /
Vimal / Standard / Crystal / Million / Sputnik / Bentec
/ Sunlight.
with extension strip of makes Gold Medal / HPL /
Vimal / Standard / Crystal / Million / Sputnik / Bentec
/ Sunlight.
2.7 VOLTAGE SURGE PROTECTORS
350 ELEC-2.7.1 Supply of 2 Pole 2 Module 40 KA 1.4 KV Voltage Surge 1 No 8047.00
Protector of make Legrand / L & T Hager / G E.
2.8 PANEL MOUNTING MCCBs/ ACBs
354 ELEC-2.8.1 Supply of 63A / 60A 3 Pole MCCB / Confirms to 1 No 5560.00
IS:13947 having Breaking Capacity 25 KA Panel
Mounted of makes L & T / GE / SCHNEIDER / ABB /
SIEMENS.
355 ELEC-2.8.2 Supply of 125A 3 Pole MCCB / Confirms to IS:13947 1 No 6600.00
having Breaking Capacity 25 KA Panel Mounted of
makes L & T / GE / SCHNEIDER / ABB / SIEMENS.
having Breaking Capacity 36/35 KA Panel Mounted of
Mounted of makes L & T / GE / SCHNEIDER / ABB /
SIEMENS.
Mounted of makes Legrand / Havells / HPL / Standard
/ Crystal.
makes Legrand / Havells / HPL / Standard / Crystal.
146
SL. SS RATE for

NO. 2010-11
Mounted of makes Legrand / Havells / HPL / Standard
/ Crystal.
370 ELEC-2.8.17 Supply of 630A 3 Pole Air Circuit Breaker electrical 1 No 95820.00
fixed Confirms to IS 13947-2, IEC 60947-2 and BS-EN
60947 with Micro processer based having over load,
shot circuit and earth fault Protection of Siemens
make.
371 ELEC-2.8.18 Supply of 630A 4 Pole Air Circuit Breaker electrical 1 No 119120.00
fixed Confirms to IS 13947-2, IEC 60947-2 and BS-EN
60947 with Micro processer based having over load,
shot circuit and earth fault Protection of Siemens
make.
372 ELEC-2.8.19 Supply of 630A 3 Pole Air Circuit Breaker electrically 1 No 128250.00
drawout Confirms to IS 13947-2, IEC 60947-2 and BS-
EN 60947 with Micro processer based having over
load, shot circuit and earth fault Protection of
Siemens / C&S make.
load, shot circuit and earth fault Protection of
Siemens / C&S make.
load, shot circuit and earth fault protection of makes
Siemens / L&T / GE.
Siemens / L&T / GE.
GE / L&T / Siemens.
147
SL. SS RATE for

NO. 2010-11
GE / L&T / Siemens.
2.9 MCBs (AS PER IS:8828)
378 ELEC-2.9.1 Supply of 6-32A 10KA SP MCB ISI Mark of make 1 No 184.00
Legrand / L & T / GE / Siemens / Schneider/ ABB.
380 ELEC-2.9.3 Supply of 6-32A 10KA SPN / DP MCB ISI Mark of make 1 No 545.00
381 ELEC-2.9.4 Supply of 40-63A 10KA SPN / DP MCB ISI Mark of 1 No 882.00
make Legrand / L & T / GE / Siemens / Schneider/
ABB.
382 ELEC-2.9.5 Supply of 6-32A TP MCB ISI Mark of make Legrand / L 1 No 876.00
& T / GE / Siemens / Schneider/ ABB.
383 ELEC-2.9.6 Supply of 40 - 63A TP MCB ISI Mark of make Legrand / 1 No 1355.00
L & T / GE / Siemens / Schneider/ ABB.
384 ELEC-2.9.7 Supply of 6-32A TPN / FP MCB ISI Mark of make 1 No 1175.00
385 ELEC-2.9.8 Supply of 40 - 63A TPN / FP MCB ISI Mark of make 1 No 1742.00
Standard / Havells / HPL / Toyoma.
388 ELEC-2.9.11 Supply of 6-32A 10KA SPN / DP MCB ISI Mark of make 1 No 469.00
389 ELEC-2.9.12 Supply of 40-63A 10KA SPN / DP MCB ISI Mark of 1 No 643.00
make Standard / Havells / HPL / Toyoma.
390 ELEC-2.9.13 Supply of 6-32A TP MCB ISI Mark of make Standard / 1 No 750.00
Havells / HPL / Toyoma.
391 ELEC-2.9.14 Supply of 40 - 63A TP MCB ISI Mark of make Standard 1 No 1040.00
/ Havells / HPL / Toyoma.
392 ELEC-2.9.15 Supply of 6-32A TPN / FP MCB ISI Mark of make 1 No 974.00
393 ELEC-2.9.16 Supply of 40 - 63A TPN / FP MCB ISI Mark of make 1 No 1306.00
394 ELEC-2.9.17 Supply of 6-32A 10KA SP MCB ISI Mark of make Gold 1 No 111.00
Medal / Milltec / Sputnik / Crystal / Bentec.
395 ELEC-2.9.18 Supply of 40-63A 10KA SP MCB ISI Mark of make Gold 1 No 202.00
396 ELEC-2.9.19 Supply of 6-32A 10KA SPN MCB ISI Mark of make Gold 1 No 307.00
397 ELEC-2.9.20 Supply of 40-63A 10KA SPN / DP MCB ISI Mark C- 1 No 459.00
Curve of make Gold Medal / Milltec / Sputnik / Crystal
/ Bentec.
398 ELEC-2.9.21 Supply of 6-32A TP MCB ISI Mark of make Gold Medal 1 No 561.00
/ Milltec / Sputnik / Crystal / Bentec.
399 ELEC-2.9.22 Supply of 40 - 63A TP MCB ISI Mark of make Gold 1 No 867.00
400 ELEC-2.9.23 Supply of 6-32A TPN MCB ISI Mark of make Gold 1 No 722.00
401 ELEC-2.9.24 Supply of 40 - 63A TPN MCB ISI Mark of make Gold 1 No 1020.00
2.10 ISOLATORS
148
SL. SS RATE for

NO. 2010-11
402 ELEC-2.10.1 Supply of 32A DP Isolator of make L & T / Legrand / 310.00
GE / Siemens / Schneider.
403 ELEC-2.10.2 Supply of 40A DP Isolator of make L & T / Legrand / 1 No 336.00
404 ELEC-2.10.3 Supply of 63A DP Isolator of make L & T / Legrand / 1 No 447.00
405 ELEC-2.10.4 Supply of 40A TP Isolator of make L & T / Legrand / 1 No 572.00
406 ELEC-2.10.5 Supply of 63A TP Isolator of make L & T / Legrand / 1 No 665.00
407 ELEC-2.10.6 Supply of 40A FP Isolator of make L & T / Legrand / 1 No 746.00
411 ELEC-2.10.10 Supply of 32A DP Isolator of make Standard / Havells / 1 No 291.00
HPL / Toyoma.
412 ELEC-2.10.11 Supply of 40A DP Isolator of make Standard / Havells / 1 No 306.00
HPL / Toyoma.
413 ELEC-2.10.12 Supply of 63A DP Isolator of make Standard / Havells 1 No 377.00
/ HPL / Toyoma.
414 ELEC-2.10.13 Supply of 40A TP Isolator of make Standard / Havells 1 No 536.00
/ HPL / Toyoma.
415 ELEC-2.10.14 Supply of 63A TP Isolator of make Standard / Havells 1 No 541.00
/ HPL / Toyoma.
416 ELEC-2.10.15 Supply of 40A FP Isolator of make Standard / Havells 1 No 622.00
/ HPL / Toyoma.
/ HPL / Toyoma.
/ HPL / Toyoma.
/ HPL / Toyoma.
420 ELEC-2.10.19 Supply of 32A DP Isolator of make Gold Medal / 1 No 197.00
Milltec / Sputnik / Crystal / Bentec.
423 ELEC-2.10.22 Supply of 40A TP Isolator of make Gold Medal / 1 No 351.00
424 ELEC-2.10.23 Supply of 63A TP Isolator of make Gold Medal / 1 No 392.00
425 ELEC-2.10.24 Supply of 40A FP Isolator of make Gold Medal / 1 No 524.00
149
SL. SS RATE for

NO. 2010-11
2.11 RCCBs CONFIRMS TO
IEC:61008 AND IS:12640
429 ELEC-2.11.1 Supply of 40A 2 Pole RCCB 30ma of makes Legrand / 1 No 2859.00
431 ELEC-2.11.3 Supply of 40A 2 Pole RCCB 100ma of makes Legrand 1 No 3051.00
/ L & T / GE / Siemens / Schneider/ ABB.
437 ELEC-2.11.9 Supply of 40A 2 Pole RCCB 30ma of makes Standard / 1 No 1974.00
Havells / HPL.
Havells / HPL.
439 ELEC-2.11.11 Supply of 40A 2 Pole RCCB 100ma of makes Standard 1 No 1943.00
/ Havells / HPL.
/ Havells / HPL.
Havells / HPL.
Havells / HPL.
/ Havells / HPL.
/ Havells / HPL.
445 ELEC-2.11.17 Supply of 40A 2 Pole RCCB 30ma of makes Milltec / 1 No 1375.00
Sputnik / Crystal / Bentec.
453 ELEC-2.11.25 Supply of MCB type Change Over Switch 20A Double 1 No 1724.00
Pole 2 way 400V AC suitable to fix on Din Channel of
150
SL. SS RATE for

NO. 2010-11
makes L & T / G E / C & S / HPL / Havells make.
2.12 MCB DISTRIBUTION BOARDS
(AS PER IS:13032)
454 ELEC-2.12.1 Supply of 4 Way SPN DB with IP 20 Protection of 1 No 663.00
makes Legrand / L & T / GE / Siemens / Schneider/
ABB.
ABB.
ABB.
ABB.
ABB.
ABB.
makes Standard / Havells / HPL / Toyoma.
makes Milltec / Sputnik / Crystal / Bentec / Gold
Medal.
Medal.
Medal.
Medal.
Medal.
Medal.
472 ELEC-2.12.19 Supply of 4 Way TPN DB Horizontal with IP 20 1 No 1295.00
Protection of makes Legrand / L & T / GE / Siemens /
Schneider/ ABB.
151
SL. SS RATE for

NO. 2010-11
Schneider/ ABB.
Schneider/ ABB.
Schneider/ ABB.
Schneider/ ABB.
Schneider/ ABB.
478 ELEC-2.12.25 Supply of 4 Way TPN DB Vertical with IP 20 Protection 1 No 4745.00
of makes Legrand / L & T / GE / Siemens / Schneider/
ABB.
ABB.
480 ELEC-2.12.27 Supply of 12 Way TPN DB Vertical with IP 20 1 No 8520.00
Schneider/ ABB.
ABB.
ABB.
ABB.
Schneider/ ABB.
485 ELEC-2.12.32 Supply of 7 Segment 4 Way TPN DB Vertical with IP 43 1 No 5435.00
Schneider/ ABB.
Schneider/ ABB.
487 ELEC-2.12.34 Supply of 4 Way TPN DB suitable for accomodating 1 No 7262.00
125A 4 Pole MCCB as incomer with IP 43 Protection of
ABB.
488 ELEC-2.12.35 Supply of 8 Way TPN DB suitable for accomodating 1 No 9095.00
125A 4 Pole MCCB as incomer with IP 43 Protection of
ABB.
489 ELEC-2.12.36 Supply of 20A SP Plug and Socket in SS enclosure of 1 No 834.00
ABB.
490 ELEC-2.12.37 Supply of 20A TP Plug and Socket in SS enclosure of 1 No 1773.00
152
SL. SS RATE for

NO. 2010-11
ABB.
ABB.
Protection of makes Standard / Havells / HPL /
Toyoma.
Toyoma.
Toyoma.
Toyoma.
Toyoma.
Toyoma.
of makes Standard / Havells / HPL / Toyoma.
Toyoma.
Toyoma.
Toyoma.
Toyoma.
Protection of makes Gold Medal / Milltec / Sputnik /
Crystal / Bentec.
153
SL. SS RATE for

NO. 2010-11
Crystal / Bentec.
Crystal / Bentec.
Crystal / Bentec.
Crystal / Bentec.
Crystal / Bentec.
Crystal / Bentec.
of makes Gold Medal / Milltec / Sputnik / Crystal /
Bentec.
517 ELEC-2.12.64 Supply of 6 Way TPN DB Vertical with IP 20 Protection 3124.00
Bentec.
Bentec.
Bentec.
Bentec.
Crystal / Bentec.
makes Gold Medal / Milltec / Sputnik / Crystal /
Bentec.
Bentec.
Bentec.
SECTION - 3
3.1 STREET LIGHT LUMINAIRES
525 ELEC-3.1.1 Supply of 1 x 36/40 W fluorescent street light 1 No 1390.00
luminaire with sheet alluminium housing and UV
stabilised acrylic cover of makes Wipro / G.E./ Phillips.
stabilised acrylic cover of makes Crompton / Bajaj /
HPL / Surya / Havells.
154
SL. SS RATE for

NO. 2010-11
stabilised acrylic cover of makes Elton / RK / Krishilite
/ Style Lamp / Mahita Electro / Elliot / Capart / Akhil.
528 ELEC-3.1.4 Supply of 80W MV Street light luminaire integral with 1 No 3031.00
pressure diecast alluminium housing having pot optics
with IP65 protection of makes Wipro / G.E./ Phillips.
with IP65 protection of makes Crompton / Bajaj /
Surya / Havells.
with IP65 protection of makes Elton / RK / Krishilite /
Style Lamp / Mahita Electro / Capart / Akhil.
531 ELEC-3.1.7 Supply of 125W MV Street light luminaire integral 1 No 3168.00
with pressure diecast alluminium housing having pot
optics with IP65 protection of makes Wipro / G.E./
Phillips.
optics with IP65 protection of makes Crompton / Bajaj
/ Surya / Havells.
optics with IP65 protection of makes Elton / RK /
Krishilite / Style Lamp / Mahita Electro / Capart /
Akhil.
534 ELEC-3.1.10 Supply of 70W SV / MH Street light luminaire integral 1 No 3735.00
optics with IP65 protection of makes Wipro / G.E./
Phillips.
optics with IP65 protection of makes Crompton / Bajaj
/ HPL / Surya / Havells.
optics with IP65 protection of makes Elton / RK /
Akhil.
537 ELEC-3.1.13 Supply of 150W SV / MH Street light luminaire 1 No 5484.00
integral with pressure diecast alluminium housing
having pot optics with IP65 protection of makes
Wipro / G.E./ Phillips.
Crompton / Bajaj / HPL / Surya / Havells.
having pot optics with IP65 protection of makes Elton
/ RK / Krishilite / Style Lamp / Mahita Electro / Capart
/ Akhil.
155
SL. SS RATE for

NO. 2010-11
having pot optics with IP65 protection of makes Elton
/ RK / Krishilite / Style Lamp / Mahita Electro / Capart
/ Akhil.
543 ELEC-3.1.19 Supply of 150W MH Flood light luminaire with integral 1 No 5535.00
weather proof diecast alluminium housing with IP65
protection of makes Wipro / G.E./ Phillips.
protection of makes Crompton / Bajaj / HPL / Surya /
Havells.
protection of makes Elton / RK / Krishilite / Style
Lamp / Mahita Electro / Capart / Akhil.
Havells.
Havells.
552 ELEC-3.1.28 Supply of 250W MH Flood light luminaire with Non - 1 No 7763.00
integral weather proof diecast alluminium housing
with IP65 protection with Control Gear Box without
lamp of makes Wipro / G.E./ Phillips.
lamp of makes Crompton / Bajaj / HPL / Surya /
Havells.
156
SL. SS RATE for

NO. 2010-11
lamp of makes Elton / RK / Krishilite / Style Lamp /
Mahita Electro / Capart / Akhil.
555 ELEC-3.1.31 Supply of 2 x 250W MH Flood light luminaire with Non 1 No 14991.00
- integral weather proof diecast alluminium housing
lamp of makes Crompton / Bajaj / Surya / HPL /
Transrail.
Transrail.
lamp of makes Elton / RK / Krishilite / Style Lamp /
560 ELEC-3.1.36 Supply of 2 x 400W MH Flood light luminaire with 1 No 16898.00
Non - integral weather proof diecast alluminium
housing with IP65 protection with Control Gear Box
without lamp of makes Wipro / G.E./ Phillips.
Transrail.
562 ELEC-3.1.38 Supply of 500W Hallozen Flood light luminaire with 1 No 731.00
cast alluminium housing and tough end glass cover
with all standard accessories of makes Wipro / G.E./
Phillips.
with all standard accessories of makes Crompton /
Bajaj / Surya / HPL / Transrail.
with all standard accessories of makes Elton / RK /
Akhil.
with all standard accessories of makes Wipro / G.E./
Phillips.
157
SL. SS RATE for

NO. 2010-11
with all standard accessories of makes Crompton /
Bajaj / Surya / HPL / Transrail.
with all standard accessories of makes Elton / RK /
Akhil.
568 ELEC-3.1.44 Supply of 80W MV Well glass and low bay luminaire of 1 No 2623.00
IP 65 integral type of makes Wipro / G.E./ Phillips.
569 ELEC-3.1.45 Supply of 80W MV Well glass and low bay luminaire of 1 No 2227.00
IP 65 integral type of makes Crompton / Bajaj / HPL /
Surya / Havells.
570 ELEC-3.1.46 Supply of 70W SV Well glass and low bay luminaire of 1 No 2673.00
IP 65 integral type of makes Wipro / G.E./ Phillips.
571 ELEC-3.1.47 Supply of 70W SV Well glass and low bay luminaire of 1 No 2587.00
IP 65 integral type of makes Crompton / Bajaj / HPL /
Surya / Havells.
3.2 POST TOP LANTERN LUMINAIRES
572 ELEC-3.2.1 Supply of 1 x 18W CFL integral post top luminaire with 1 No 1750.00
conical shape, opal clear acrylic diffuser with cast
alluminium pole mounting capsule complete with all
accessories and ballast of makes Crompton / Bajaj /
Surya / K Lite / HPL.
573 ELEC-3.2.2 Supply of 125W MV integral type standard Diamond / 1 No 3650.00
Spherical Post Top Lantern Luminaire of BJPTI 125 MV
or its equivalent with all accessories. makes Crompton
/ Bajaj / Surya.
574 ELEC-3.2.3 Supply of 70W SV / MH integral HID lamp post top 1 No 3640.00
lantern BJDPTI 70SV / MH LPF or its equivalent with
diamond / Mushroom / Spherical diffuser etc
complete with all accessories of makes Bajaj /
Crompton / Surya / HPL.
ACCESSORIES FOR MV / SV / MH LUMINAIRES
3.3 COPPER BALLASTS
575 ELEC-3.3.1 Supply of 80W MV copper ballast of makes Wipro / 1 No 750.00
G.E./ Phillips / Crompton / Bajaj / Surya / Havells.
576 ELEC-3.3.2 Supply of 80W MV copper ballast of makes RK / 1 No 720.00
Ballast Makers / Krishilite / Style Lamp / Akhil /
Capart.
577 ELEC-3.3.3 Supply of 125W MV copper ballast.of makes Wipro / 1 No 820.00
G.E./ Phillips / Crompton / Bajaj / Surya / Havells.
578 ELEC-3.3.4 Supply of 125W MV copper ballast.of makes RK / 1 No 730.00
Capart.
579 ELEC-3.3.5 Supply of 70 W SV / MH copper ballast.of makes 1 No 800.00
Crompton / Bajaj / Surya / HPL / Havells.
581 ELEC-3.3.7 Supply of 70 W SV / MH copper ballast.of makes RK / 1 No 650.00
Capart.
158
SL. SS RATE for

NO. 2010-11
584 ELEC-3.3.10 Supply of 150 W SV / MH copper ballast.of makes RK 1 No 1010.00
/ Ballast Makers / Krishilite / Style Lamp / Akhil /
Capart.
Capart.
Capart.
591 ELEC-3.3.17 Supply of Ignitor for SV / MH Lamp of makes Wipro / 1 No 190.00
G.E./ Phillips / Crompton / Bajaj / Surya / HPL /
Havells.
592 ELEC-3.3.18 Supply of 4 mfd HPF Capacitor of makes Wipro / G.E./ 1 No 120.00
Phillips make
593 ELEC-3.3.19 Supply of 4 mfd HPF Capacitor of makes Crompton / 1 No 106.00
Bajaj / Surya / Havells.
594 ELEC-3.3.20 Supply of 4 mfd HPF Capacitor of makes Elton / RK / 1 No 85.00
Ballst makers / Flourcraft / Mahita Electro / Capart.
595 ELEC-3.3.21 Supply of 10 mfd HPF Capacitor of makes Wipro / 1 No 200.00
G.E./ Phillips make
G.E./ Phillips make
G.E./ Phillips make
G.E./ Phillips make
159
SL. SS RATE for

NO. 2010-11
G.E./ Phillips make
ENEGRY SAVING ELECTRONIC BALLAST FOR STREET
LIGHT
610 ELEC-3.3.36 Supply of 70W SV / MH Electronic ballast of makes 1 No 1920.00
Trinic or its equivalent.
3.4 LAMPS
614 ELEC-3.4.1 Supply of 500W Hallozen Lamp of makes Wipro / G.E./ 1 No 108.00
Phillips / Osram.
615 ELEC-3.4.2 Supply of 500W Hallozen Lamp of makes Crompton / 1 No 80.00
Bajaj / Surya / HPL / Havells.
616 ELEC-3.4.3 Supply of 500W Hallozen Lamp of makes Elton / Style 1 No 60.00
Lamp / Mahita Electro / Capart
617 ELEC-3.4.4 Supply of 1000W Hallozen Lamp of makes Wipro / 1 No 130.00
G.E./ Phillips / Osram.
618 ELEC-3.4.5 Supply of 1000W Hallozen Lamp of makes Crompton / 1 No 100.00
619 ELEC-3.4.6 Supply of 1000W Hallozen Lamp of makes Elton / 1 No 80.00
Style Lamp / Mahita Electro / Capart
620 ELEC-3.4.7 Supply of 70W SV Lamp of makes Wipro / G.E./ 1 No 495.00
Phillips / Osram.
621 ELEC-3.4.8 Supply of 70W SV Lamp of makes Crompton / Bajaj / 1 No 450.00
Surya / HPL / Havells.
622 ELEC-3.4.9 Supply of 70W SV Lamp of makes Elton / Style Lamp / 1 No 400.00
Mahita Electro / Capart
Phillips / Osram.
625 ELEC-3.4.12 Supply of 150W SV Lamp of makes Elton / Style Lamp 1 No 600.00
/ Mahita Electro / Capart
Phillips / Osram.
Phillips / Osram.
632 ELEC-3.4.19 Supply of 70W double end MH Lamp of makes Wipro 1 No 605.00
160
SL. SS RATE for

NO. 2010-11
/ G.E./ Phillips / Osram.
633 ELEC-3.4.20 Supply of 70W double end MH Lamp of makes 1 No 580.00
634 ELEC-3.4.21 Supply of 70W double end MH Lamp of makes Elton / 1 No 530.00
635 ELEC-3.4.22 Supply of 150W double end MH Lamp of makes Wipro 1 No 900.00
/ G.E./ Phillips / Osram.
636 ELEC-3.4.23 Supply of 150W double end MH Lamp of makes 1 No 850.00
637 ELEC-3.4.24 Supply of 150W double end MH Lamp of makes Elton 1 No 800.00
/ Style Lamp / Mahita Electro / Capart
639 ELEC-3.4.26 Supply of 70W MH Lamp of makes Crompton / Bajaj / 1 No 890.00
640 ELEC-3.4.27 Supply of 70W MH Lamp of makes Elton / Style Lamp 1 No 850.00
641 ELEC-3.4.28 Supply of 150W MH Lamp of makes Wipro / G.E./ 1 No 990.00
Phillips / Osram.
642 ELEC-3.4.29 Supply of 150W MH Lamp of makes Crompton / Bajaj 1 No 950.00
/ Surya / HPL / Havells.
Phillips / Osram.
Phillips / Osram.
650 ELEC-3.4.37 Supply of 80W MV Lamp of makes Wipro / G.E./ 1 No 180.00
Phillips / Osram.
651 ELEC-3.4.38 Supply of 80W MV Lamp of makes Crompton / Bajaj / 1 No 160.00
652 ELEC-3.4.39 Supply of 80W MV Lamp of makes Elton / Style Lamp 1 No 140.00
Phillips / Osram.
654 ELEC-3.4.41 Supply of 125W MV Lamp of makes Crompton / Bajaj 1 No 170.00
Phillips / Osram.
161
SL. SS RATE for

NO. 2010-11
Phillips / Osram.
662 ELEC-3.4.49 Supply of 160W MLL Lamp of makes Wipro / G.E./ 1 No 240.00
Phillips / Osram.
663 ELEC-3.4.50 Supply of 160W MLL Lamp of makes Crompton / Bajaj 1 No 220.00
664 ELEC-3.4.51 Supply of 160W MLL Lamp of makes Elton / Style 1 No 200.00
Lamp / Mahita Electro / Capart
3.5 NATURE SWITCHES
665 ELEC-3.5.1 Supply of Swadeep Nature Switch or its equivalent 1 No 10560.00
with suitable SMC enclousure, MCBs contactor
suitable to control the load of 3 KW of single phase
load.
load.
load.
suitable to control the load of 5 KW of Three phase
load.
load.
load.
3.6 INTERNAL LUMINAIRES
671 ELEC-3.6.1 Supply of 1 x 11W Mirror light with all standard 1 No 645.00
accessories diffuser of makes Wipro / G.E./ Phillips.
accessories diffuser of makes Crompton / Bajaj / HPL /
Surya / Havells.
accessories diffuser of makes Elton / RK / Krishilite /
Akhil.
674 ELEC-3.6.4 Supply of 1 x 36/40W Box type tube light luminaire 1 No 660.00
powder coated CRCA sheet steel housing with VPIT
Chokes and all standard accessories of makes Wipro /
G.E./ Phillips.
Chokes and all standard accessories of makes
162
SL. SS RATE for

NO. 2010-11
Chokes and all standard accessories of makes Elton /
RK / Ballast Makers / Krishilite / Style Lamp / Mahita
Electro / Capart / Akhil / Million.
powder coated CRCA sheet steel housing with
Electronic Ballast Chokes and all standard
accessoriesof makes Wipro / G.E./ Phillips.
accessoriesof makes Crompton / Bajaj / Surya / HPL /
Havells.
accessoriesof makes Elton / RK / Ballast Makers /
Krishilite / Style Lamp / Mahita Electro / Capart / Akhil
/ Million.
Chokes and all standard accessoriesof makes Wipro /
G.E./ Phillips.
Chokes and all standard accessoriesof makes
Chokes and all standard accessoriesof makes Elton /
Electro / Capart / Akhil.
accessoriesof makes Wipro / G.E./ Phillips.
accessoriesof makes Crompton / Bajaj / Surya / HPL /
Havells.
accessoriesof makes Elton / RK / Ballast Makers /
Akhil.
686 ELEC-3.6.16 Supply of 1 x 36/40W Patty type tube light luminaire 1 No 350.00
powder coated CRCA sheet steel housing with Copper
Chokes and all standard accessories of makes Wipro /
G.E./ Phillips.
Chokes and all standard accessories of makes
163
SL. SS RATE for

NO. 2010-11
Chokes and all standard accessories of makes Elton /
RK / Ballast Makers / Krishilite / Kumar / Million /
Gold Medal / Vimal / Flourcraft / Akhil.
689 ELEC-3.6.19 Supply of 1 x 36/40W Industrial Box type tube light 1 No 1200.00
luminaire powder coated CRCA sheet steel housing
with VPIT Chokes and all standard accessories of
makes Wipro / G.E./ Phillips.
makes Crompton / Bajaj / Surya / Havells with
reflector.
makes Elton / RK / Krishilite / Kumar / Style Lamp /
makes Crompton / Bajaj / Surya / HPL / Havells.
makes Elton / RK / Krishilite / Akhil.
695 ELEC-3.6.25 Supply of 2 x 36/40W surface / Recessed mounting 1 No 2400.00
mirror optic luminaire with powder coated CRCA
sheet steel housing with alluminium mirror reflector
and decorative end plates with VPIT chokes, Starters,
Condencers of makes Wipro / G.E./ Phillips.
Condencers of makes Crompton / Bajaj / Surya / HPL /
Havells.
Condencers of makes Elton / RK / Krishilite / Akhil.
698 ELEC-3.6.28 Supply of 2 x 36/40W Surface / Recessed mounting 1 No 2600.00
and decorative end plates with Electronic Ballast of
makes.Wipro / G.E./ Phillips.
164
SL. SS RATE for

NO. 2010-11
and decorative end plates with Electronic Ballast, of
makes Elton / RK / Ballast Makers / Krishilite / Fixolite
/ Kumar.
701 ELEC-3.6.31 Supply of 2 x 11W CFL Surface / Recessed mounting 1 No 1485.00
Condencers of makes Wipro / G.E./ Phillips.
702 ELEC-3.6.32 Supply of Supply of 2 x 11W CFL Surface / Recessed 1 No 1330.00
mounting mirror optic luminaire with powder coated
CRCA sheet steel housing with alluminium mirror
reflector and decorative end plates with VPIT chokes,
Starters, Condencers of makes Crompton / Bajaj /
Condencers of makes Elton / RK / Krishilite / Kumar.
makes Elton / RK / Krishilite / Kumar / Style Lamp.
707 ELEC-3.6.37 Supply of 2 x 36W CFL Paralite louvre (P5) Surface / 1 No 4525.00
Recessed low glare Mirror Optic luminaire comprising
bright anodised alluminium reflector with VPIT Choke
of makes Wipro / G.E./ Phillips.
bright anodised alluminium reflector with VPIT Choke
of makes Crompton / Bajaj / Surya / Havells.
bright anodised alluminium reflector with Electronic
Ballst of makes Wipro / G.E./ Phillips.
165
SL. SS RATE for

NO. 2010-11
bright anodised alluminium reflector with Electronic
Ballst of makes Crompton / Bajaj / Surya / Havells.
711 ELEC-3.6.41 Supply of 2 x 36W CFL Direct / Indirect Recessed low 1 No 4000.00
glare Mirror Optic luminaire comprising bright
anodised alluminium reflector with VPIT Choke of
anodised alluminium reflector with VPIT Choke of
anodised alluminium reflector with Electronic Ballst of
anodised alluminium reflector with Electronic Ballst of
715 ELEC-3.6.45 Supply of 1 x 28W surface pendent mounting T5 1 No 760.00
Luminaire plastic housing with integrated reflector
extruded alluminium luminaire with Electronic Ballast
and all standard accessories.of makes Crompton /
716 ELEC-3.6.46 Supply of 1 x 28W surface pendent mounting T5 1 No 650.00
Luminaire plastic housing with integrated reflector
extruded alluminium luminaire with Electronic Ballast
and all standard accessories.of makes Elliot / Million /
Akhil / Gold Medal / Vimal.
717 ELEC-3.6.47 Supply of 1 x 13/18W Indoor recessed mounting 1 No 900.00
horizontal type down lights luminaire with
alluminium/Matt finished reflecttor with all standard
accessories of makes Wipro / G.E./ Phillips.
accessories of makes Crompton / Bajaj / Surya / HPL /
Havells.
accessories of makes Wipro / G.E./ Phillips.
accessories of makes Crompton / Bajaj / Surya / HPL /
Havells.
horizontal type down lights luminaire with Frosted
glass cover reflecttor with all standard accessories of
166
SL. SS RATE for

NO. 2010-11
725 ELEC-3.6.55 Supply of 70W metal hallid down light Recessed 1 No 2500.00
mounting with control gear of makes Wipro / G.E./
Phillips.
726 ELEC-3.6.56 Supply of 70W metal hallid down light Recessed 1 No 2200.00
mounting with control gear of makes Crompton /
727 ELEC-3.6.57 Supply of Recessed mounting 12V 50W adjustable 1 No 742.00
Halozen down light with white colour gold shade
including transformerWipro / G.E./ Phillips.
728 ELEC-3.6.58 Supply of Recessed mounting 12V 50W adjustable 1 No 668.00
including transformer of make Crompton / Bajaj /
729 ELEC-3.6.59 Supply of Recessed mounting 12V 50W zoom type 1 No 980.00
including transformer of makes Wipro / G.E./ Phillips.
730 ELEC-3.6.60 Supply of Recessed mounting 12V 50W zoom type 1 No 880.00
including transformer of makes Crompton / Bajaj /
Surya / Havells.
731 ELEC-3.6.61 Supply of 9/13W VPIT Ballast for CFL of makes Wipro / 1 No 140.00
G.E./ Phillips.
732 ELEC-3.6.62 Supply of 9/13W VPIT Ballast for CFL of makes 1 No 126.00
733 ELEC-3.6.63 Supply of 9/13W VPIT Ballast for CFL of makes Elton / 1 No 110.00
Electro / Capart
734 ELEC-3.6.64 Supply of 18W VPIT Ballast for CFL of makes Wipro / 1 No 140.00
G.E./ Phillips.
735 ELEC-3.6.65 Supply of 18W VPIT Ballast for CFL of makes 1 No 120.00
736 ELEC-3.6.66 Supply of 18W VPIT Ballast for CFL of makes Elton / RK 1 No 110.00
/ Ballast Makers / Krishilite / Style Lamp / Mahita
Electro / Capart
737 ELEC-3.6.67 Supply of 20W Copper Wound Ballast of makes 1 No 180.00
739 ELEC-3.6.69 Supply of 20W Copper Wound Ballast of makes Elton 1 No 145.00
/ RK / Ballast Makers / Krishilite / Style Lamp / Akhil /
Capart / Million / Gold Medal / Vimal.
740 ELEC-3.6.70 Supply of 40W Copper Wound Ballast of makes Wipro 1 No 180.00
/ G.E./ Phillips.
167
SL. SS RATE for

NO. 2010-11
742 ELEC-3.6.72 Supply of 40W Copper Wound Ballast of makes Elton 1 No 145.00
/ RK / Ballast Makers / Krishilite / Style Lamp / Akhil /
743 ELEC-3.6.73 Supply of 18/20W VPIT Ballast Wipro / G.E./ Phillips. 1 No 180.00
744 ELEC-3.6.74 Supply of 18/20W VPIT Ballast Crompton / Bajaj / 1 No 160.00
745 ELEC-3.6.75 Supply of 18/20W VPIT Ballast Elton / RK / Ballast 1 No 145.00
Makers / Krishilite / Style Lamp / Mahita Electro /
Capart
746 ELEC-3.6.76 Supply of 36/40W VPIT Ballast Wipro / G.E./ Phillips. 1 No 210.00
747 ELEC-3.6.77 Supply of 36/40W VPIT Ballast Crompton / Bajaj / 1 No 180.00
748 ELEC-3.6.78 Supply of 36/40W VPIT Ballast Elton / RK / Ballast 1 No 170.00
749 ELEC-3.6.79 Supply of 40W Starter of makes Wipro / G.E./ Phillips. 1 No 10.00
750 ELEC-3.6.80 Supply of 40W Starter of makes Crompton / Bajaj / 1 No 8.00
751 ELEC-3.6.81 Supply of 40W Starter of makes Elton / RK / Ballast 1 No 7.00
752 ELEC-3.6.82 Supply of Rotor holder(FTL) of makes Wipro / G.E./ 1 No 20.00
Phillips.
753 ELEC-3.6.83 Supply of Rotor holder(FTL) of makes Crompton / 1 No 18.00
754 ELEC-3.6.84 Supply of Rotor holder(FTL) of makes Elton / RK / 1 No 16.00
Ballast Makers / Krishilite / Style Lamp / Mahita
Electro / Capart / Million / Gold Medal / Vimal.
755 ELEC-3.6.85 Supply of HID Lamp holder of makes Wipro / G.E./ 1 No 50.00
Phillips.
756 ELEC-3.6.86 Supply of HID Lamp holder of makes Crompton / Bajaj 1 No 45.00
757 ELEC-3.6.87 Supply of HID Lamp holder of makes Elton / RK / 1 No 40.00
Electro / Capart
758 ELEC-3.6.88 Supply of CFL holder of makes Wipro / G.E./ Phillips. 1 No 30.00
759 ELEC-3.6.89 Supply of CFL holder of makes Crompton / Bajaj / 1 No 25.00
760 ELEC-3.6.90 Supply of CFL holder of makes Elton / RK / Ballast 1 No 23.00
Capart
761 ELEC-3.6.91 Supply of FTL Starter holder of makes Wipro / G.E./ 1 No 14.00
Phillips.
762 ELEC-3.6.92 Supply of FTL Starter holder of makes Crompton / 1 No 12.00
763 ELEC-3.6.93 Supply of FTL Starter holder of makes Elton / RK / 1 No 11.00
Electro / Capart / Million / Gold Medal / Vimal.
764 ELEC-3.6.94 Supply of 36W Electronic Ballast for FTL.of makes 1 No 600.00
Crompton / Bajaj / Surya / HPL / Havells / Trinic /
Elliot.
168
SL. SS RATE for

NO. 2010-11
Akhil / RK / Krishilite / Kumar / Style Lamp / Million /
Gold Medal / Vimal.
3.7 FLOURSCENT / CFL LAMPS
767 ELEC-3.7.1 Supply of 40W-60W Lamp of makes Wipro / G.E./ 1 No 12.00
Phillips.
768 ELEC-3.7.2 Supply of 40W-60W Lamp of makes Crompton / Bajaj 1 No 11.00
769 ELEC-3.7.3 Supply of 40W-60W Lamp of makes Elton / Style Lamp 1 No 10.00
770 ELEC-3.7.4 Supply of 100W Lamp of makes Wipro / G.E./ Phillips. 1 No 13.00
771 ELEC-3.7.5 Supply of 100W Lamp of makes Crompton / Bajaj / 1 No 12.00
772 ELEC-3.7.6 Supply of 100W Lamp of makes Elton / Style Lamp / 1 No 11.00
773 ELEC-3.7.7 Supply of 40W - 60W Milky Lamp of makes Wipro / 1 No 14.00
G.E./ Phillips.
774 ELEC-3.7.8 Supply of 40W - 60W Milky Lamp of makes Crompton 1 No 13.00
/ Bajaj / Surya / HPL / Havells.
775 ELEC-3.7.9 Supply of 40W - 60W Milky Lamp of makes Elton / 1 No 12.00
776 ELEC-3.7.10 Supply of Night Lamp of makes Wipro / G.E./ Phillips. 1 No 11.00
777 ELEC-3.7.11 Supply of Night Lamp of makes Crompton / Bajaj / 1 No 10.00
778 ELEC-3.7.12 Supply of Night Lamp of makes Elton / Style Lamp / 1 No 9.00
779 ELEC-3.7.13 Supply of 18/20W fluorescent Lamp of makes Wipro / 1 No 41.00
G.E./ Phillips.
780 ELEC-3.7.14 Supply of 18/20W fluorescent Lamp of makes 1 No 39.00
781 ELEC-3.7.15 Supply of 18/20W fluorescent Lamp of makes Elton / 1 No 38.00
782 ELEC-3.7.16 Supply of 36/40W fluorescent Lamp of makes Wipro / 1 No 45.00
G.E./ Phillips.
783 ELEC-3.7.17 Supply of 36/40W fluorescent Lamp of makes 1 No 40.00
784 ELEC-3.7.18 Supply of 36/40W fluorescent Lamp of makes Elton / 1 No 38.00
785 ELEC-3.7.19 Supply of 28W T5 Lamp of makes Crompton / Bajaj / 1 No 120.00
Phillips / Surya / Havells.
786 ELEC-3.7.20 Supply of 9W Pin type CFL Lamp of makes Wipro / 1 No 75.00
G.E./ Phillips.
787 ELEC-3.7.21 Supply of 9W Pin type CFL Lamp of makes Crompton 1 No 70.00
G.E./ Phillips.
G.E./ Phillips.
169
SL. SS RATE for

NO. 2010-11
G.E./ Phillips.
G.E./ Phillips.
G.E./ Phillips.
798 ELEC-3.7.32 Supply of up to 5W Retrofit tiny CFL of makes Wipro / 1 No 115.00
G.E./ Phillips.
799 ELEC-3.7.33 Supply of up to 5W Retrofit tiny CFL of makes 1 No 110.00
800 ELEC-3.7.34 Supply of up to 8W Retrofit tiny CFL of makes Wipro / 1 No 125.00
G.E./ Phillips.
801 ELEC-3.7.35 Supply of up to 8W Retrofit tiny CFL of makes 1 No 120.00
802 ELEC-3.7.36 Supply of up to 10/11W Retrofit tiny CFL of makes 1 No 135.00
806 ELEC-3.7.40 Supply of 15W Retrofit tiny CFL of makes Wipro / 1 No 180.00
G.E./ Phillips.
807 ELEC-3.7.41 Supply of 15W Retrofit tiny CFL of makes Crompton / 1 No 150.00
808 ELEC-3.7.42 Supply of up to 18/20W Retrofit CFL of makes Wipro 1 No 170.00
/ G.E./ Phillips.
809 ELEC-3.7.43 Supply of up to 18/20W Retrofit CFL of makes 1 No 150.00
810 ELEC-3.7.44 Supply of 23W Retrofit CFL of makes Wipro / G.E./ 1 No 200.00
Phillips.
811 ELEC-3.7.45 Supply of 23/25W Retrofit CFL of makes Crompton / 1 No 180.00
812 ELEC-3.7.46 Supply of up to 25/26W Retrofit CFL of makes Wipro 1 No 200.00
/ G.E./ Phillips.
813 ELEC-3.7.47 Supply of up to 25/26W Retrofit CFL of makes 1 No 180.00
814 ELEC-3.7.48 Supply of up to 5W Non - Retrofit CFL of makes Wipro 1 No 70.00
/ G.E./ Phillips.
815 ELEC-3.7.49 Supply of up to 5W Non - Retrofit CFL of makes 1 No 65.00
816 ELEC-3.7.50 Supply of up to 7 W Non - Retrofit CFL of makes 1 No 100.00
170
SL. SS RATE for

NO. 2010-11
3.8 ENERGY CONSERVING FIXTURES
830 ELEC-3.8.1 Supply of TRINIC / ELLIOT or its equivalent make 1 x 1 No 893.00
28W Patty type powder coated energy conserving
tube light luminaire with Electronic ballast operating
voltage range of 90 volts to 350 volts power factor >
0.98 current less than 130ma crest factor and total
hormonic distortion shall be as per IS Specification
with auto cut off at high voltage suitable for 36/40W
tube.
831 ELEC-3.8.2 Supply of ELLIOT or its equivalent make 1 x 28W Patty 1 No 919.00
type powder coated energy conserving tube light
luminaire with Electronic ballast operating voltage
range of 90 volts to 350 volts power factor > 0.98
current less than 130ma crest factor and total
with auto cut off at high voltage and auto restart at
normal voltage suitable for 36/40W tube.
832 ELEC-3.8.3 Supply of TRINIC / ELLIOT or its equivalent make 1 x 1 No 945.00
28W Box type powder coated energy conserving tube
light luminaire with Electronic ballast operating
voltage range of 90 volts to 350 volts power factor >
0.98 current less than 130ma crest factor and total
with auto cut off at high voltage suitable for 36/40W
tube.
833 ELEC-3.8.4 Supply of ELLIOT or its equvalent make 1 x 28W Box 1 No 1024.00
type powder coated energy conserving tube light
luminaire with Electronic ballast operating voltage
range of 90 volts to 350 volts power factor > 0.98
current less than 130ma 'crest factor total hormonic
distortion shall be as per IS Specification with auto cut
off at High Voltage and Auto restart at normal
171
SL. SS RATE for

NO. 2010-11
voltage suitable for 36/40W tube.
834 ELEC-3.8.5 Supply of TRINIC / ELLIOT or its equvalent make 1 No 3623.00
Recessed mounted mirror optic luminaire with
paralite louvers (P5) suitable for 2 x 36W CFL
lamps.Electronic ballast operating voltage range of 90
volts to 350 volts power factor > 0.98 current less
than 130ma crest factor and total hormonic
distortion shall be as per the IS Specification with auto
cut off at High Voltage suitable for 36/40W tube.
835 ELEC-3.8.6 Supply of ELLIOT or its equivalent make Recessed 1 No 3728.00
mounted mirror optic luminaire with paralite louvers
(P5) suitable for 2 x 36W CFL lamps.Electronic ballast
operating voltage range of 90 volts to 350 volts power
factor > 0.98 current less than 130ma crest factor and
total hormonic distortion shall be as per the IS
Specification with auto cut off at High Voltage and
Auto restart at normal voltage for 36/40W tube.
836 ELEC-3.8.7 Supply of TRINIC / ELLIOT or its equvalent make 28 W 1 No 675.00
Electronic Ballast with auto cut off at High Voltage
suitable for FTL.
837 ELEC-3.8.8 Supply of ELLIOT or its equvalent make 28 W 1 No 725.00
Electronic Ballast with auto cut off at High Voltage
and auto restart at normal voltage suitable for FTL.
3.9 LED LUMINAIRES INDOOR
838 ELEC-3.9.1 Supply and Transportation of 30W Recessed / Surface 15,000.00
mounting 2' x 2' LED luminaire made of sheet steel
body with acrylic diffuser, Constant current out put of
Driver operating voltage range of 150 to 265 Volts AC,
Power factor > 0.9 high power LED 1 watt having
efficacy of > 90 lumins/watt, junction temparature
less than 85 degrees centigrade etc complete.
a) LUMINAIRE MAKE : PHILLIPS / WIPRO / G.E.
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SEOUL SEMI CONDUCTORS / SAMSUNG.
body with acrylic diffuser,Constant current out put of
Driver operating voltage range of 150 to 265 Volts
AC, Power factor > 0.9 high power LED 1 watt having
a) LUMINAIRE MAKE : MIC / BAJAJ / CROMPTON
GREAVES / AVNI / SURYA / FORTUNE ART.
172
SL. SS RATE for

NO. 2010-11
842 ELEC-3.9.5 Supply and Transportation of 9W Down lighter 4,000.00
Recessed / Surface mounting made of diecast
alluminium body with powder coating acrylic diffuser
Constant current out put of Driver operating voltage
range of 150 to 265 Volts AC, Power factor > 0.9 high
power 9 Nos of 1W LED 1 watt having efficacy of > 90
lumins/watt etc., complete.
173
SL. SS RATE for

NO. 2010-11
in put voltage range of 150 to 265 Volts AC, Power
factor > 0.9 high power 7 Nos of 2W LED 1 watt
having efficacy of > 90 lumins/watt etc., complete.
849 ELEC-3.9.12 Supply and Transportation of 3W Down lighter 950.00
850 ELEC-3.9.13 Supply and transportation of 4 w LED Drivers 1,390.00
851 ELEC-3.9.14 Supply and transportation of 8 w LED Drivers 1,400.00
852 ELEC-3.9.15 Supply and transportation of indoor cove light LED 2,660.00
Drivers of 4 TO 8 mtr rope
LED TYPE STREET LIGHTS
853 ELEC-3.9.16 Supply and transportation of 18W LED street light 13,500.00
luminaire made of pressure diecast alluminium body
with powder coated, having toughned glass cover
input voltage range of 100 to 270 volts AC, power
factor > 0.90, high power LED 1 watt having efficacy
90 lumines/watt and junction temprature < 85 degree
centegrade of IP 65 with optics, total hormonic
destortion less than 10% at 110 Volts AC, driver
efficiency >90% and ISO 9001:2008 certificate etc.,
complete.
174
SL. SS RATE for

NO. 2010-11
complete.
complete.
complete.
complete.
175
SL. SS RATE for

NO. 2010-11
complete.
complete.
complete.
complete.
176
SL. SS RATE for

NO. 2010-11
a) LUMINAIRE MAKE : PHILLIPS / WIPRO / G.E / BAJAJ
RUUD.
complete.
a) LUMINAIRE MAKE : MIC / CROMPTON GREAVES /
AVNI / SURYA / FORTUNE ART.
SECTION - 4
4.1 U.G. CABLES
863 ELEC-4.1.1 Supply of 4 Sqmm 2 Core.XLPE PVC armoured 1 Mtr 85.00
alluminium cable of makes Torrent / Nicco / Universal
/ CCI / Fortune Art EBXL.
alluminium cable of makes Polycab / RPG / Finolex /
Havells / Paragon / V-Guard.
alluminium cable of makes Finecab / Suncab / Delton
/ Payal / Gemscab / SPM.
177
SL. SS RATE for

NO. 2010-11
884 ELEC-4.1.22 Supply of 25 Sqmm 3.5 Core.XLPE PVC armoured 1 Mtr 191.00
178
SL. SS RATE for

NO. 2010-11
/ Payal / Gemscab.
179
SL. SS RATE for

NO. 2010-11
/ Payal / Gemscab.
/ Payal / Gemscab.
11 KV H.T. XLPE CABLES
917 ELEC-4.1.55 Supply of 3 Core 11 KV 35 Sqmm HT XLPE (E) 558.00
armoured Cable. As per IS specification confirming to
IS 7098/II/85 with latest ammendments. Makes
Torrent / Nicco / Universal / CCI/ Polycab.
IS 7098/II/85 with latest ammendments.Makes
4.2 CABLE GLANDS
180
SL. SS RATE for

NO. 2010-11
933 ELEC-4.2.10 Supply and Fixing of Single compression brass cable 1 No 300.00
glands for 3.5 core PVC armoured cable for 185Sqmm
with brass washers complete.
937 ELEC-4.2.14 Supply and Fixing of single compression brass cable 1 No 86.00
glands for 4 core PVC armoured cable up to 16.0
Sq.mm with brass washers complete.
938 ELEC-4.2.15 Supply and Fixing of single compression brass cable 1 No 126.00
glands for 3.5 core PVC armoured cable from 25
Sqmm to 50.0 Sq.mm with brass washers complete.
glands for 3.5 core PVC armoured cable from 70
Sqmm to 150.0 Sq.mm with brass washers complete.
4.3 LUGS
940 ELEC-4.3.1 Supply and fixing of crimping type copper lugs 1 No 20.00
confirming to I.S specifications for cable upto 16
Sq.mm including nuts and bolts with connections.
confirming to I.S specifications for cable of 25 Sq.mm
including nuts and bolts with connections.
181
SL. SS RATE for

NO. 2010-11
952 ELEC-4.3.13 Supply and fixing of crimping type aluminium lugs 1 No 11.00
confirming to I.S specifications for cable upto 16
Sq.mm including nuts and bolts with connections.
4.4 CABLE JOINTS
182
SL. SS RATE for

NO. 2010-11
HEAT SHRINKABLE LT CABLE JOINTS
979 ELEC-4.4.16 Supply and errecting heat shrinkable straight through 543.00
joint Indoor / Out door for L.T. OVC Armoured 1100V
grade cable complete with necessary accessories and
suitable clamps including cost and conveyance of
materials and all labour charges etc., complete for 2.5
to 16 Sqmm. Makes Raychem.
materials and all labour charges etc., complete for 25
materials and all labour charges etc., complete for 70
materials and all labour charges etc., complete for
185 to 300 Sqmm. Makes Raychem.
983 ELEC-4.4.20 Supply and errecting heat shrinkable straight through 1,135.00
materials and all labour charges etc., complete for
400 Sqmm. Makes Raychem.
3 CORE 11 KV HT CABLE STRAIGHT THROUGH JOINTS
984 ELEC-4.4.21 Providing and erecting heat shrinkable straight 13,700.00
through joint out door / indoor for H.T, PVC Armoured
cable 1100V grade complete with necessary
accessories and suitable clamps duly erected and
connected to the supply for the following multi core
cables including cost and conveyance of materials
and all labour charges etc., complete for 16 to
35Sqmm.Makes Raychem.
183
SL. SS RATE for

NO. 2010-11
HT END TERMINATION KITS
987 ELEC-4.4.24 Providing and errecting heat shrinkable indoor 7,464.00
termination kit for 11 KV XLPE HT cable 3 core 70
Sqmm with necessary materials etc., complete.Makes
Raychem.
Raychem.
Raychem.
990 ELEC-4.4.27 Providing and errecting heat shrinkable outdoor 11,320.00
Raychem.
Raychem.
Raychem.
4.5 DOUBLE WALLED CORRUGATED HDPE PIPE
993 ELEC-4.5.1 Supply and Transportation of DURA LINE (Dura Guard) 1 Mtr 92.00
or its equivalent make of Outer dia 50mm and Inner
dia 38mm double walled corrugated HDPE duct made
as per specification BSEN - 500 86/IS 14930 Part-II.
dia 103.50mm double walled corrugated HDPE duct
made as per specification BSEN - 500 86/IS 14930
Part-II.
184
SL. SS RATE for

NO. 2010-11
dia 136mm double walled corrugated HDPE duct
Part-II.
Part-II.
Part-II.
4.6 CABLE TRAYS
1001 ELEC-4.6.1 Supply and Installation of 600mm x 75mm x 2mm 1 Mtr 1300.00
thick hot dip GI perforated cable tray with cover
along with required angle supports, with coupler
plates, Anchor bolts and nuts etc complete and the
tray should be fitted on the stone masonary wall by
providing hole in the wall ahere ever necessary and
also including necessary masonary work etc.,
complete.
thick GI perforated cable tray with cover along with
required angle supports, with coupler plates, Anchor
bolts and nuts etc complete and the tray should be
fitted on the stone masonary wall by providing hole in
the wall ahere ever necessary and also including
necessary masonary work etc., complete.
thick GI Ladder type cable tray along with required
angle supports, with coupler plates, Anchor bolts and
nuts etc complete and the tray should be fitted on the
stone masonary wall by providing hole in the wall
ahere ever necessary and also including necessary
masonary work etc., complete.
185
SL. SS RATE for

NO. 2010-11
Note: Perforated cable trays provided without cover
30% may be deducted from above rates.
SECTION - 5
5.1 FANS
1009 ELEC-5.1.1 Supply of 48" (1200mm) Sweep Ceiling Fan without 1 No 1400.00
Regulator.of makes Crompton High Speed / Bajaj
Ultima / Havells Velocity / Usha Astra / Orient
Summer Pride.
Regulator.of makes Crompton Decora / Bajaj G Gold /
Havells Deco / Usha Striker / Orient PSPO.
Regulator.of makes Crompton / Bajaj / Orient /Usha
with 5 Star rating.
Regulator.of makes Crompton High Speed / Bajaj
Ultima / Havells Velocity / Usha Astra / Orient
Summer Pride.
Regulator.of makes Crompton Decora / Bajaj G Gold /
Havells Deco / Usha Striker / Orient PSPO.
Regulator.of makes Crompton Aura / Bajaj R Gold /
Havells Festiva / Usha Premium.
1015 ELEC-5.1.7 Supply of 16" (400mm) Wall mounted Fan of makes 1 No 2045.00
Crompton SDX Gold / Bajaj Victor / Havells Remote /
Usha / Orient.
1016 ELEC-5.1.8 Supply of 16" (400mm) Pedestal Fan of makes 1 No 2360.00
Crompton SDX Gold / Bajaj Victor / Havells Remote /
Usha / Orient.
1017 ELEC-5.1.9 Supply of 18" (450mm) Air Circulators of makes 1 No 5500.00
Crompton / Bajaj / Havells / Orient / Almounard.
1018 ELEC-5.1.10 Supply of 24" (600mm) Air Circulators of makes 1 No 6000.00
Crompton / Bajaj / Havells / Orient / Almounard.
1019 ELEC-5.1.11 Supply of 12" (300mm) Cabin fan of makes Crompton 1 No 1305.00
/ Bajaj / Havells / Orient.
1020 ELEC-5.1.12 Supply of 12" (300mm) ISI, Fresh Air fan of makes 1 No 1100.00
186
SL. SS RATE for

NO. 2010-11
Crompton / Bajaj / Havells / Orient.
1021 ELEC-5.1.13 Supply of 9" (225mm) ISI, Fresh Air fan of makes 1 No 1150.00
1022 ELEC-5.1.14 Supply of 12" (300mm)ISI, 900 RPM Heavy duty 1 No 2300.00
exhaust fan with metallic blades with Mark of makes
5.2 WATER HEATERS
1025 ELEC-5.2.1 Supply of 25 Ltrs Geyser with Copper tank with Metal 1 No 6960.00
body of makes Venus / Bajaj / Racold / Usha /
Crompton / V-Guard.
1026 ELEC-5.2.2 Supply of 35 Ltrs Geyser with Copper tank with Metal 1 No 8000.00
body of makes Venus / Bajaj / Racold / Usha /
Crompton / V-Guard.
1027 ELEC-5.2.3 Supply of 25 Ltrs Geyser with Copper tank with ABS 1 No 8050.00
Plastic body of makes Venus / Bajaj / Racold / Usha /
Crompton / V-Guard.
1028 ELEC-5.2.4 Supply of 35 Ltrs Geyser with Copper tank with ABS 1 No 9950.00
Plastic body of makes Venus / Bajaj / Racold / Usha /
Crompton / V-Guard.
5.3 ACCESSORIES FOR WATER HEATERS
1029 ELEC-5.3.1 Heating element of 1.5 / 2.0 / 3.0 KW. 1 No 330.00
0
1030 ELEC-5.3.2 Supply of thermostat with range 30 to 1 No 200.00
0
90 C.Adjustable and suitable for 25 to 50 Ltrs.
Capacity.
1031 ELEC-5.3.3 Supply of pressure release valve for water heater of 1 No 200.00
15 to 50 Ltrs.capacity.
1032 ELEC-5.3.4 Flexible Nylon / PVC Metallic hose pipe 1 No 110.00
5.4 ACCESSORIES FOR MOTORS
1033 ELEC-5.4.1 Supply & Fixing of D.O.L Starter 250V, Single phase, 1 No 780.00
50Hz. With SS enclouser comprising of contactor with
bi-metalic relay with necessary push buttons, etc.,
complete .
1034 ELEC-5.4.2 Supply & Fixing of D.O.L Starter 415V, 3 phase, 50Hz.. 1 No 1450.00
enclosed with no volt coil and overload protection
with necessary materials, etc., complete suitable upto
7.5.HP.
1035 ELEC-5.4.3 Supply & Fixing of Semi automatic star / delta starter 1 No 4500.00
suitable for 10 HP to 12.5 HP Induction Motor totally
enclosed with over load protection and no volt relay
etc., complete.
1036 ELEC-5.4.4 Supply & Fixing of Semi automatic star / delta starter 1 No 7000.00
suitable for 15 HP to 25 HP Induction Motor totally
etc., complete.
1037 ELEC-5.4.5 Supply & Fixing of Automatic star / delta starter 1 No 5760.00
suitable for 10 HP to 12.5 HP Induction Motor totally
etc., complete.
187
SL. SS RATE for

NO. 2010-11
1038 ELEC-5.4.6 Supply & Fixing of Automatic star / delta starter 1 No 6097.00
suitable up to 15 HP Induction Motor totally enclosed
with over load protection and no volt relay etc.,
complete.
1039 ELEC-5.4.7 Single phasing preventer connected to A.C. supply 1 No 2106.00
upto 45A range.
1040 ELEC-5.4.8 Motor Cover made with GI sheet of 18SWG for 1 No 45.00
protection from rain complete.
SINGLE PHASE SUBMERSIBLE MOTOR PUMP SETS
1041 ELEC-5.4.9 Supply and Transportation of 0.75HP 8 Stage single 13100.00
phase ISI submersible motor pumpset suitable for 4"
Bore well. Makes: Kirloskar / Crompton / CRI / L&T /
Texmo / Varsha.
Texmo / Varsha.
Texmo / Varsha.
Texmo / Varsha.
Texmo / Varsha.
THREE PHASE SUBMERSIBLE MOTOR PUMP SETS.
1046 ELEC-5.4.14 Supply and Transportation of 3.00HP 18 Stage Three 18800.00
Texmo / Varsha.
Texmo / Varsha.
Texmo / Varsha.
Texmo / Varsha.
Texmo / Varsha.
Texmo / Varsha.
188
SL. SS RATE for

NO. 2010-11
Texmo / Varsha.
Texmo / Varsha.
Texmo / Varsha.
SINGLE PHASE OPEN WELL SUBMERSIBLE MOTOR
PUMP SETS.
1055 ELEC-5.4.23 Supply and Transportation of 1.00HP Single phase 9400.00
open well ISI submersible motor pumpset. Makes:
Kirloskar / Crompton / CRI / L&T / Texmo / Varsha.
THREE PHASE OPEN WELL SUBMERSIBLE PUMP SETS.
1058 ELEC-5.4.26 Supply and Transportation of 3.00HP Three phase 13200.00
open well ISI submersible motor pumpset.(65/50)
Makes: Kirloskar / Crompton / CRI / L&T / Texmo /
Varsha.
Varsha.
Varsha.
SINGLE PHASE MONO BLOCK MOTOR PUMP SETS.
1061 ELEC-5.4.29 Supply and Transportation of 0.5HP Single phase ISI 4100.00
Mono block motor pumpset (25x25mm). Makes:
CONTROL PANEL BOARD FOR MOTORS
1064 ELEC-5.4.32 Supply and Transportation of Direct - on - Line LTLK / 4800.00
SIEMENS / CROMPTON make starters fitted in sheet
metal box size of 265 x 295 x 110mm suitable
enclosure for single phase motors up to 3 HP at 220V
50Hz operating range between 80 to 240 Volts with
starting and running capacitors assembled with ISI
mark contactors and fitted with Legrand make ISI
189
SL. SS RATE for

NO. 2010-11
mark MCB etc., complete.
enclosure for 3 phase motors up to 5 HP at 415V 50Hz
fitted with all equipments with suitable ISI mark LTLK
/ Crompton make Capacitor and Single Pahse
preventor with Legrand make ISI mark MCB etc.,
complete.
enclosure for 3 phase motors up to 7.5 HP at 415V
50Hz fitted with all equipments with suitable ISI mark
LTLK / Crompton make Capacitor and Single Pahse
preventor with Legrand make ISI mark MCB etc.,
complete.
1067 ELEC-5.4.35 Supply and Transportation of Fully Automatic Star 17500.00
Delta Motor Starters fitted in CRCA sheet steel
enclosure suitable for 3 Phase 415V, 50Hz AC Motor
Pump set above 7.5HP and up to 12.5HP with ISI
marked LTLK / SIEMENS / CROMPTON suitable
Capacitor and Single Pahse preventor with Legrand
make ISI mark MCB etc., complete.
1068 ELEC-5.4.36 Supply and Transportation of Semi Automatic Star 16500.00
Pump set above 7.5HP and up to 12.5HP with ISI
1069 ELEC-5.4.37 Supply and Transportation of Fully Automatic Star 19500.00
Pump set above 12.5HP and up to 120HP with ISI
1070 ELEC-5.4.38 Supply and Transportation of Semi Automatic Star 18500.00
Pump set above 12.5HP and up to 120HP with ISI
5.5 REPAIRS TO AIR CONDITIONERS
1071 ELEC-5.5.1 Supply, Fabrication of well seasoned T.W frame of 1 No 1065.00
size 27" x 19" (with 3"x4" size TW) for 1.0 / 1.5 / 2.0
Ton Window A.C.Unit.
1072 ELEC-5.5.2 Providing Copper tubing between indoor and outdoor 1 Mtr 550.00
unit for split Air-Conditioner including foaming etc.,
complete.
1073 ELEC-5.5.3 Supply of 1.0 / 1.5 Ton brand new Rotary type sealed 1 No 8150.00
compressor.
190
SL. SS RATE for

NO. 2010-11
1074 ELEC-5.5.4 Supply of 2.0 Ton brand new Rotary type sealed 1 No 9250.00
compressor.
1075 ELEC-5.5.5 Multi speed Fan Motor suitable for 1.0 / 1.5 / 2.0 Ton 1 No 1250.00
Window A.C.Unit of makes Crompton / AU.
1076 ELEC-5.5.6 Fan motor capacitor 6 mfd by new capacitor for A.C 1 No 156.00
machine of 1.0 1.5 / Ton Capacity.
1077 ELEC-5.5.7 Thermostat switch suitable for 1.0 / 1.5 / 2.0 Ton 1 No 410.00
A.C.Unit.
1078 ELEC-5.5.8 Starting capacitor of 80 to 120 mfd. by new approved 1 No 180.00
make capacitor suitable for compressor motor of 1.0
/ 1.5 Ton A.C. Unit.
1079 ELEC-5.5.9 Running capacitor of 36 mfd by new approved make 1 No 220.00
capacitor suitable for compressor motor of 1.0 / 1.5
Ton A.C.Unit.
1080 ELEC-5.5.10 Relay by approved make having pickup voltage 220 1 No 225.00
Volts and dropout voltage 120 Volts suitable for 1.0 /
1.50 Ton A.C. Unit.
1081 ELEC-5.5.11 Filter and capillary tube including welding etc., 1 No 485.00
complete for 1.0 / 1.5 / 2.0 Ton A.C.Unit.
1082 ELEC-5.5.12 Air filter suitable for 1.50 Ton Window A.C.Unit P.V.C. 1 No 225.00
/ NYLON.
1083 ELEC-5.5.13 Air filter suitable for 1.50 Ton Split A.C.Unit P.V.C. / 1 No 475.00
NYLON.
1084 ELEC-5.5.14 Rewiring the entire Window type 1.50 Ton A.C.unit 1 No 325.00
with 2.5 Sq.mm Flexible copper cable and putting the
same in working conditions.
1085 ELEC-5.5.15 Overhauling and servicing the Window type 1.0 / 1.5 1 No 350.00
Ton A.C. Machine by Cleaning the condensor cooling
Coil etc., by blower and oiling the Fan Motor and
Cleaning all parts and putting the machine in working
condition.
1086 ELEC-5.5.16 Fan blade for 1.0 / 1.5 Ton A.C.Machine. 1 No 160.00
1087 ELEC-5.5.17 Grill of 1.0 / 1.5 ton A.C. Machine (for assembled 1 No 427.00
Units).
1088 ELEC-5.5.18 Grill of 1.0 / 1.5 ton A.C. Machine of branded units. 1 No 1700.00
1089 ELEC-5.5.19 Rotary / Selector switch by new one. 1 No 115.00
1090 ELEC-5.5.20 Flushing the line, leak testing, leak stopping, 1 No 1500.00
vaccumming, dehydrating and charging the gas in the
refrigeration system for 1.0/ 1.5 /2.0 Ton Window
A.C.Unit.
1091 ELEC-5.5.21 Flushing the line, leak testing, leak stopping, 1 No 2100.00
vaccumming, dehydrating and charging the gas in the
refrigeration system for 1.5 /2.0 Ton Split A.C.Unit.
1092 ELEC-5.5.22 Spray painting of Refrigerator using good quality paint 1 No 720.00
after scraping the surface etc.
1093 ELEC-5.5.23 New sealed compressor of 1/8 HP suitable for 165 to 1 No 3100.00
185 Ltrs. Capacity Refrigerator.
1094 ELEC-5.5.24 Sealed compressor of 1/6 HP suitable for 285 / 310 1 No 3750.00
Ltrs. Capacity Refrigerator.
1095 ELEC-5.5.25 Supply of fan motor by new 1/10 t0 1/12 H.P 1250 1 No 1590.00
RPM fan motor for Water Cooler of 80-150 Ltrs.
1096 ELEC-5.5.26 Bush for fan motor of 80-150 Lts. 1 No 125.00
1097 ELEC-5.5.27 Fan hook of 12/15mm dia M.S. rod / bar 1 No 20.00
191
SL. SS RATE for

NO. 2010-11
1098 ELEC-5.5.28 19/20mm steel tube down rod of 1 meter length. 1 No 60.00
1099 ELEC-5.5.29 Resistance type regulator for ceiling fans 1 No 40.00
900/1200/1400mm sweep complete erected on
existing board.
SPLIT AIR CONDITIONERS
1100 ELEC-5.5.30 Supply of 1.5 Ton 3 Star Model capacity split AC unit 1 No 27,950.00
with high wall mounted indoor unit and outdoor
condencing unit Hermetically sealed rotary type
compressor operating on refrigerant R-22 suitable for
operation on 230V, 50Hz, 1Phase AC supply capable
of performing cooling dehumidifying air circulating
and filtering with cooling and condensing units with
5mts of required size of copper piping duly insulated
and 3 core copper flexible chord of required
length.(Bluestar 3HWE181YB / Carrier DuraKool /
Hitachi - RAU 01 8K QDD / Samsung - AS 183 TGA
make)
and 3 core copper flexible chord of required length.(
Carrier Durakool Plus / Samsung - AS 18 EFB(crystal
wine) make)
condencing unit Hermetically sealed compressor
operating on refrigerant R-22 suitable for operation
on 230V, 50Hz, 1Phase AC supply capable of
performing cooling dehumidifying air circulating and
filtering with cooling and condensing units with 5mts
of required size of copper piping duly insulated and 3
core copper flexible chord of required length.(Carrier
DuraKool Star / Blue Star SHWE 181 YB / Hitachi
RAU018 GPD / Samsung - AS 18 EXA Vivace Plus
(Crystal Black) make)
core copper flexible chord of required length.(Carrier
DuraKool Plus / Panasonic - CS - PC 24 JKY make)
192
SL. SS RATE for

NO. 2010-11
core copper flexible chord of required
length.(Bluestar 3HWE241YB / LG-LSA 6BW3 NT1
make)
length.(Bluestar / Carrier Dura Kool Star / Hitachi
make)
length.(Daikin FTE 50 / 'O' General / Thoshiba Make)
length.(Daikin FT 50G / 'O' General / Thoshiba Make)
1108 ELEC-5.5.38 Supply of 1.8 / 2.0 Ton 1 Star Model capacity split AC 1 No 39,000.00
unit with high wall mounted indoor unit and outdoor
core copper flexible chord of required length.(Daikin
FTE 60 / 'O' General / Thoshiba Make)
1109 ELEC-5.5.39 Supply of 1.8 / 2.0 Ton 4 Star Model capacity split AC 1 No 45,800.00
unit with high wall mounted indoor unit and outdoor
193
SL. SS RATE for

NO. 2010-11
length.(Daikin FT 60 G / 'O' General / Thoshiba
Make)
WINDOW AIR CONDITIONERS
1110 ELEC-5.5.40 Supply of 1.5 Ton 2 Star Model capacity Window AC 1 No 19,250.00
unit with Hermetically sealed rotary type compressor
on 230V, 50Hz, 1Phase AC supply and capable of
filtering with cooling and condensing units. (Bluestar /
Carrier Durakool / Hitachi make)
Carrier Estrella / Hitachi make)
on 230V, 50Hz, 1Phase AC supply with remote and
capable of performing cooling dehumidifying air
circulating and filtering with cooling and condensing
units. (Bluestar / Carrier Durakool / Hitachi make)
Carrier Durakool / Hitachi make)
STABILIZERS
1114 ELEC-5.5.44 Supply of 0.5 KVA Stabilizer of make V-Guard / Real 1 No 990.00
Guard / Uni Stab / ITL.
1115 ELEC-5.5.45 Supply of 0.5 KVA Stabilizer of make Keeline / Soft 1 No 810.00
Line / Capri.
Line / Capri.
Line / Capri.
Line / Capri.
194
SL. SS RATE for

NO. 2010-11
Line / Capri.
5.6 REPAIRS TO MOTORS AND REWINDING, BEARINGS
1124 ELEC-5.6.1 Bearing of approved make for electric motor single 1 No 179.00
phase / 3 phase AC upto 1 HP of all types.
phase / 3 phase AC upto 2 to 3 HP of all types.
phase / 3 phase AC upto 5 to 7.5 HP of all types.
phase / 3 phase AC upto 10 to 12.5 HP of all types.
1128 ELEC-5.6.5 Bearing of approved make for electic motor single 1 No 489.00
phase / 3 phase AC upto 15 to 20 HP of all types.
1129 ELEC-5.6.6 Bearing of table / cabin / pedestal / ceiling / exhaust 1 No 84.00
fan complete with alignment of shaft and tested.
1130 ELEC-5.6.7 Bearing of bush / rubber / ring washers complete 1 No 40.00
with alignment of shaft and tested.
1131 ELEC-5.6.8 Capacitor of table / cabin / pedestal / ceiling / exhaust 1 No 38.00
fan complete.
1132 ELEC-5.6.9 EICHER model 11:10 with 100 H. P direct injestion 4 1 No 795069.00
stroke engine with one spare wheel 3800 mm cabin
high deck with jangla (full body) (4 wheeler) for
generator
6.1 SWAGED POLES / OCTOGONAL POLES, GARDEN
POSTS AND ACCESSORIES
1138 ELEC-6.1.1 Fabrication, supply and transportation of all sizes 1 Kg 65.00
swaged poles up to site confirming to IS 2713 / 1980
specifications. The pole should be painted with
primary coat of red oxide and black bituminous paint
up to ground level with base plate, including cost of
all materials etc., complete.(Rate per K. G)
1139 ELEC-6.1.2 Fabrication and Supply of M.S. Poles for garden posts 1 Kg 60.00
with 'B' class 60.25mm outer dia with base plate and
suitable pole cap including cost and conveyance of all
material including fixing of luminaire and labour
charges etc., complete. (Rate per K. G)
1140 ELEC-6.1.3 Supply of different sizes of M. S. Pipe brackets (Rate 1 Kg 60.00
per K.G)
1141 ELEC-6.1.4 Fabrication, Transportation and supply of hot-dip 1 No 8962.00
galvanized Octogonal Pole with BSEN - 10025 grade S
355 JO steel plate for shaft, IS 2062 for base plate
with door opening arrangement, including the supply
of suitable boards with bakelite sheet and MCB's as
per IS specification suitable to withstand the wind
speed of 180 KMPH for 7.50 Mtrs height Pole having
dimensions Bottom 130 mm,. Top 70mm with 3mm
thick, base plate 220 x 220 x 12mm and 4 Nos of M20
x 700 long 'J' bolts along with template of Makes Bajaj
/ Aster /TRANSRAIL / Surya.
195
SL. SS RATE for

NO. 2010-11
speed of 180 KMPH for 9 Mtrs height Pole having
thick, base plate 260 x 260 x 16mm and 4 Nos of M24
/ Aster / TRANSRAIL / Surya.
speed of 180 KMPH for 10 Mtrs height Pole having
thick, base plate 285 x 285 x16mm and 4 Nos of M24
/ Aster /TRANSRAIL / Surya.
speed of 180 KMPH for 12 mtrs height Pole having
thick, base plate 320 x320 x20mm and 4 Nos of M24 x
850 long 'J' bolts along with template of Makes Bajaj /
Aster /TRANSRAIL / Surya.
1145 ELEC-6.1.8 Fabrication, Transportation and supply of 1.0 Mtr 1 No 1125.00
Length Single Arm Bracket made with MS galvanized
40mm / 50mm dia Pipe.
Length Single Arm Bracket made with MS galvanized
1147 ELEC-6.1.10 Fabrication, Transportation and supply of 1 Mtr length 1 No 1296.00
Double Arm Bracket made with MS galvanized 40mm
/ 50mm dia Pipe.
length Double Arm Bracket made with MS galvanized
1149 ELEC-6.1.12 Fabrication,transportation and supply of MS hot dip 1 No 22050.00
galvanized 9.0 Mtrs long octagonal poles with 3mm
thick HT steel plate with a bottom 200mm dia and top
100mm dia, base plate of size 290mmx290mmx16mm
thick welded to bottom of pole, terminal box with
door size of 500mmx100mm with all accessories
connector and fuse base and a fixing arrangements
for advertisements holdings, foundation bolts with
washers and nuts 4 sets. including S&F of 1.5mtrs
196
SL. SS RATE for

NO. 2010-11
sword type decorative double arm bracket with
dooms either sides complete with all accessories as
per the requirements at site and as per the directions
of field engineers during execution for finished item
of work. Makes Bajaj / Aster / TRANSRAIL / Surya.
1150 ELEC-6.1.13 Foundation and erection charges for 9 mtrs / 10 Mtrs 1 No 4500.00
long Octagonal/Conical pole duly erecting on base
plate 290mm x 290mm x 16mm thick duly providing 4
Nos. foundation bolts with nuts with providing of M20
c.c work vibrated concreting mixing with necessary
steel (38kgs) reinforcement as directed by the field
engineers during execution including all labour
charges and cost and conveyance of materials etc.
complete.
1151 ELEC-6.1.14 Fabrication, transportation and supply of 12 Mtrs 1 No 86998.00
Polygon High Mast with single section of 3mm thick of
Bottom 350mm and Top 125mm dia with BSEN -
10025 grade S 355 JO steel plate for shaft, IS 2062 for
base plate, having a base plate of size 520mm dia
16mm thick with its accessories. Mast shall be in
single section for 12 Mtrs and 2 sections for 16 and 20
Mtrs. Mast shall be hot dip galvanized and suiatble for
wind velocity of 180 KMPH as per IS 875 part 3
including head frame, 2 point suspension system with
steel rope 6mm dia (7/19) construction double drum
winch / power tool operating speed of 900 RPM, and
necessary cable trailer connections and single speed
motor with M 24 x 800 mm foundation bolts of
required quantitywith GLS type aviation twin lamp
Makes Bajaj / Aster / TRANSRAIL / Surya.
Polygon High Mast with two sections of Bottom 4mm
thick and Top section with 3mm thick with GLS type
aviation lamp of Bottom 350mm and Top 125mm dia
with BSEN - 10025 grade S 355 JO steel plate for shaft,
IS 2062 for base plate, having a base plate of size
560mm dia 25mm thick with its accessories. Mast
shall be in single section for 12 Mtrs and 2 sections for
16 and 20 Mtrs. Mast shall be hot dip galvanized and
suiatble for wind velocity of 180 KMPH as per IS 875
part 3 including head frame, 2 point suspension
system with steel rope 6mm dia (7/19) construction
double drum winch / power tool operating speed of
900 RPM, and necessary cable trailer connections
and single speed motor with M 24 x 800 mm
foundation bolts of required quantity with GLS type
aviation twin lamp Makes Bajaj / Aster / TRANSRAIL /
Surya.
Polygon High Mast with two sections of Bottom 4mm
thick and Top section with 3mm thick of Bottom
400mm and Top 150mm dia with BSEN - 10025 grade
S 355 JO steel plate for shaft, IS 2062 for base plate,
having a base plate of size 570mm dia 25mm thick
197
SL. SS RATE for

NO. 2010-11
with its accessories. Mast shall be in single section for
12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall
be hot dip galvanized and suiatble for wind velocity of
180 KMPH as per IS 875 part 3 including head frame, 2
point suspension system with steel rope 6mm dia
(7/19) construction double drum winch / power tool
operating speed of 900 RPM, and necessary cable
trailer connections and single speed motor with M
24 x 800 mm foundation bolts of required quantity
with GLS type aviation twin lamp of Makes Bajaj /
Aster / TRANSRAIL / Surya.
1154 ELEC-6.1.17 Supply and fixing of suitable feeder piller box made 1 No 26744.00
with 14 SWG CRCA sheet including S & F of Legrand /
Schnieder / Siemens / ABB / L&T make 40A TP MCB, 6
Nos SP MCB's, bus bars, 6 Sqmm 3 core copper cable
for invidual light control, contactor, suitable timer and
connectors and provision for energy meter etc.,
1155 ELEC-6.1.18 Supply and fixing of suitable feeder piller box made 1 No 28215.00
with 14 SWG CRCA sheet including S & F of Legrand /
Schnieder / Siemens / ABB / L&T make 63A TP MCB, 8
Nos SP MCB's, bus bars, 6 Sqmm 3 core copper cable
for invidual light control, contactor, suitable timer and
connectors and provision for energy meter etc.,
1156 ELEC-6.1.19 Earth work exacavation with a approximate quantity 1 No 28073.00
of 4.0 Cum for errection of 12 Mtrs high mast and
refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50
Cum M 20 grade concrete and (80 Kgs) reinforced
steel of 12mm / 10mm / 8mm, Soil bearing capacity
of 10 T/Sqm, Anchor plate with cost and conveyance
of all above materials including labour charges for
errection of High Mast and Carraige etc complete.
1159 ELEC-6.1.22 Fabrication,transportation and supply of MS hot dip 17313.00
galvanized 9.0 Mtrs long octagonal poles with 3mm
198
SL. SS RATE for

NO. 2010-11
washers and nuts 4 sets. including S&F of 1.5mtrs
sword type decorative single arm bracket with dooms
either sides complete with all accessories as per the
requirements at site and as per the directions of field
engineers during execution for finished item of work.
Makes Bajaj / Aster /TRANSRAIL / Surya.
galvanized 9.0 Mtrs long Conical poles with 3mm
washers and nuts 4 sets. including S&F of 1.0 mtrs C
type decorative single arm with painted bracket with
dooms either sides complete with all accessories as
per the requirements at site and as per the directions
of field engineers during execution for finished item
of work. Makes Bajaj / Aster / TRANSRAIL / Surya.
galvanized 10.0 Mtrs long Conical poles with 3mm
washers and nuts 4 sets. including S&F of 1.5 mtrs C
type decorative Double arm with painted bracket
with dooms either sides complete with all accessories
as per the requirements at site and as per the
directions of field engineers during execution for
finished item of work. Makes Bajaj / Aster /
TRANSRAIL / Surya.
6.2 CONTROL PANEL BOARD
1162 ELEC-6.2.1 Fabrication and erection of 14SWG CRCA sheet steel 1 sq. 2.25
enclosure for power control cubicle panel / boxes inch
etc., including cutting, bending drilling, welding and
reveting etc., complete with cleaning with 7 tank
process and painting with powder coating including
cost and conveyance of all materials and labour
charges.
1163 ELEC-6.2.2 Fabrication and erection of 16 SWG CRCA sheet steel 1 sq. 2.00
charges.
1164 ELEC-6.2.3 Fabrication and erection of 18SWG CRCA sheet steel 1 sq. 1.80
199
SL. SS RATE for

NO. 2010-11
charges.
6.3 METERING EQUIPMENT
1165 ELEC-6.3.1 Supply and erection of 0-415V volt Digital meter of 1 No 2500.00
size 96x96mm on exisiting box / panel board including
connections etc., complete.CONZERV/AE/MECO/ HPL
MAKE.
1166 ELEC-6.3.2 Supply and erection of 0-415V volt Analog meter of 1 No 450.00
size 96x96mm on exisiting box / panel board including
connections etc., complete.CONZERV/AE/MECO/ HPL
MAKE.
1167 ELEC-6.3.3 Supply and erection of 0-100 / 200 / 400 / 600 /1000 - 1 No 2500.00
5A CT Digital Ammeter of size 96x96mm on existing
box / panel board including connections etc.,
complete. CONZERV/AE/MECO/ HPL MAKE.
1168 ELEC-6.3.4 Supply and erection of 0-100 / 200 / 400 / 600 /1000 - 1 No 450.00
5A CT Analog Ammeter of size 96x96mm on existing
box / panel board including connections etc.,
complete. CONZERV/AE/MECO/ HPL MAKE.
1169 ELEC-6.3.5 Supply and erection of Digital frequency meter of size 1 No 4556.00
96x96mm on existing box / panel board including
connections etc., complete. CONZERV/AE/MECO/ HPL
MAKE.
1170 ELEC-6.3.6 Supply and erection of Digital power factor meter, 3 1 No 2700.00
phase, 4 wire balanced or unabalanced load 5A, 415V
of size 96x96mm on existing box / panel board
including connections etc., complete.
CONZERV/AE/MECO/ HPL MAKE.
1171 ELEC-6.3.7 Supply and erection of L.T. 3phase Analog 1 No 10023.00
multifunction energy meter with 3 lines LCD display of
size 96x96mm for measuring all the parameters
(voltage / Current / Power / frequency / power factor
/ kw / kwh / KVAR/ KVARH/) on existing box panel
board including connections etc.,
complete.(HPL/Conzerv/AE makes)
1172 ELEC-6.3.8 Supply and erection of Analog selector switch for 1 No 175.00
voltmeter / Ammeter on the existing box / panel
including connections etc., complete.
(HPL/Conzerv/AE makes)
1173 ELEC-6.3.9 Supply and erection of Analog LED indicator lamps on 1 No 135.00
the existing box / panel board.(HPL/Conzerv/AE
makes)
1174 ELEC-6.3.10 Supply and erection of Analog LT current transformer 1 No 450.00
with bar primary 100/5A to 1000 / 5A ratio in the
existing box / panel including connections etc.,
complete. (HPL/Conzerv/AE makes)
1175 ELEC-6.3.11 Supply and fixing of single phase Analog energy 1 No 1012.00
Meter,240V AC,50 HZ as per IS13010 with 2.5-5 /5-
10/10-20 Amps range with 200% over load capacity
complete with connections etc., complete on the
200
SL. SS RATE for

NO. 2010-11
existing board. (HPL/Conzerv/AE makes)
1176 ELEC-6.3.12 Supply and fixing of three phase Analog energy Meter, 1 No 3037.00
415V AC,50 HZ as per IS13010 with 2.5-5 /5-10/10-20
Amps range with 200% over load capacity complete
with connections etc., complete on the existing board.
(HPL/Conzerv/AE makes)
6.4 SUB STATION EQUIPMENT
1177 ELEC-6.4.1 Carryout routine maintenance, servicing and testing 1 No 1800.00
of 630A to 1000A L.T.ACB by cleaning fixed contacts,
moving contacts and arcchutes including servicing
and putting the ACB in perfect working condition after
detting all relay and ON, OFF mechanism etc.
1178 ELEC-6.4.2 Carryout routine maintenance and servicing of 1 No 2500.00
LT.Cubical pannel board having approximately 15 to
22 Nos of switches cleaning with power brower and
servicing the contacts, tightning the connection of
incoming and outgoing cables, and clicking the
operating machanism for smooth functioning of
switches and putting them in smooth working
condition.
1179 ELEC-6.4.3 Routine maintenance of transformer in operation 1 No 4350.00
covering insulation resistance oil, break down
strength. Reconditioning / replacement of silicazel,
cleaning of transformer and topping upto oil level if
required (extra cost will be paid for oil).
1180 ELEC-6.4.4 Testing of Transformer oil for dielectric breakdown 1 No 500.00
strength.
1181 ELEC-6.4.5 Removing the existing transformer from the plinth / 1 No 2500.00
Pole and refixing the standby transformer of
following capacity including connections etc.,
complete.- Upto 315 KVA
1182 ELEC-6.4.6 Removing the existing transformer from the plinth / 1 No 3500.00
Pole and refixing the standby transformer of
following capacity including connections etc.,
complete. -500 / 1000 KVA
1183 ELEC-6.4.7 Replacing old and unserviceable gasket of top cover 1 No 750.00
plate of transformer having following capacity. -Upto
315 KVA
1184 ELEC-6.4.8 Replacing old and unserviceable gasket of top cover 1 No 1050.00
plate of transformer having following capacity. -500 /
1000 KVA
1185 ELEC-6.4.9 Replacing old and unserviceable gasket of H. T 1 No 300.00
bushing for the following Transformer capacity. -Upto
315 KVA
1186 ELEC-6.4.10 Replacing old and unserviceable gasket of H. T 1 No 550.00
bushing for the following Transformer capacity. -500 /
1000 KVA
1187 ELEC-6.4.11 Replacing old and unserviceable gasket of L.T bushing 1 No 700.00
for the following transformer capacity. Upto 315 KVA
1188 ELEC-6.4.12 Replacing old and unserviceable gasket of L.T bushing 1 No 1450.00
for the following transformer capacity. 500 / 1000
KVA
1189 ELEC-6.4.13 Replacement the H/T / L. T burntout winding coils of 1 Kg 590.00
distribution transformer including rewinding,
201
SL. SS RATE for

NO. 2010-11
varnishing and vaccuming etc.,duly retaining the
removed burnt winding coils by the Contractor / Firm-
For copper coils
1190 ELEC-6.4.14 Replacement the H/T / L. T burntout winding coils of 1 Kg 390.00
distribution transformer including rewinding,
varnishing and vaccuming etc.,duly retaining the
removed burnt winding coils by the Contractor / Firm
- For aluminium coils
1191 ELEC-6.4.15 Insulating HT / LT copper / aluminium coils for 1 No 300.00
Transformers.
1192 ELEC-6.4.16 Painting with 2 coats Zinchromate red oxide duly 1 No 3000.00
scraping existing paint followed by 2 coats of
hammerton grey paint etc., complete. -Upto 500 KVA
1193 ELEC-6.4.17 Painting with 2 coats Zinchromate red oxide duly 1 No 4000.00
scraping existing paint followed by 2 coats of
hammerton grey paint etc., complete. -630 / 1000
KVA
1194 ELEC-6.4.18 Replacing H.T bushing for distribution Transformer by 1 No 350.00
new one.
1195 ELEC-6.4.19 Replacing H.T bushing metal parts for distribution 1 No 380.00
Transformer by new one.
1196 ELEC-6.4.20 Replacing L.T bushing for distribution Transformer by 1 No 165.00
new one for the following capacities. - Upto 315 KVA
1197 ELEC-6.4.21 Replacing L.T bushing for distribution Transformer by 1 No 175.00
new one for the following capacities.- 500 / 1000 KVA
1198 ELEC-6.4.22 Replacing L.T bushing metal parts for distribution 1 No 300.00
Transformer by new one for the following capacities.
-100 KVA
-250 / 315 KVA
-500 KVA
-1000 KVA
1202 ELEC-6.4.26 Drying the repaired transformer with appropriate 1 No 3000.00
heat / air of following capacity of transformers. -Upto
315 KVA
1203 ELEC-6.4.27 Drying the repaired transformer with appropriate 1 No 4200.00
heat / air of following capacity of transformers. -500 /
1000KVA
1204 ELEC-6.4.28 Loading and Unloaidng of transformer from site to 1 No 4500.00
Workshop or vice verse. -Upto 500 KVA
1205 ELEC-6.4.29 Loading and Unloaidng of transformer from site to 1 No 6800.00
Workshop or vice verse. -630 / 1000 KVA
1206 ELEC-6.4.30 Transformer oild tested as per IS-335 - 1972 (per Ltr) 1 Ltr 90.00
1207 ELEC-6.4.31 Filteration of transformer oil as per ISS specifications 1 Ltr 8.00
filters to die electric strength above 40 K. V at site.
(per Ltr)
1208 ELEC-6.4.32 Filteration of transformer oil as per ISS specifications 1 Ltr 5.00
filters to die electric strength above 40 K. V at
workshop (per Ltr)
202
SL. SS RATE for

NO. 2010-11
6.5 LIGHTENING PROTECTIVE SYSTEM
1209 ELEC-6.5.1 Supply and erecting approved make 11KV, 5KA metal 1 No 1,500.00
oxide lightning arrestors suitable for 11 KV supply
with necessary materials on existing cross arm.
1210 ELEC-6.5.2 Supply and erecting porcelain disc type insulator 1 No 600.00
suitable for 11KV line with suitable hardware on
existing cross arms.
1211 ELEC-6.5.3 Supply and erecting porcelain pin type insulator 1 No 300.00
1212 ELEC-6.5.4 Supply and erecting porcelain post type insulator 1 No 675.00
1213 ELEC-6.5.5 Supply and erecting porcelain pin/shackle type 1 No 90.00
insulator suitable for L. T.
1214 ELEC-6.5.6 Supply and fixing of lightning protective system 1 No 600.00
conforming to IS : 2309 with all standard accessories
such as metal globe finials on the top of the builiding
with 25.4 mm dia 3.0mtrs. Length of 'B' class G.I pipe
etc., complete without down conductors and
earthing.
1215 ELEC-6.5.7 Approved made 11KV, 400A A.B switch with all 1 No 7000.00
standard accessories etc., complete with cost and
conveyance of all materials.
1216 ELEC-6.5.8 Approved made 11KV, 200A A.B switch with all 1 No 6100.00
standard accessories etc., complete with cost and
1217 ELEC-6.5.9 Approved made 11KV, 200A A.B switch (tilting) with 1 No 5900.00
all standard accessories etc., complete with cost and
1218 ELEC-6.5.10 11KV, H.G fuse set including all standard accessories 1 No 4000.00
etc., complete with cost and conveyance of all
materials.
1219 ELEC-6.5.11 Supply of 7/3.15 AAA C all Alluminium annealed 1 Km 23160.00
conductor Rabit.
1220 ELEC-6.5.12 Supply of 7/2.50 AAA C all Alluminium annealed 1 Km 14243.00
conductor Weasel.
1221 ELEC-6.5.13 Supply of 9.1 Mtr PSCC Pole 280 Kg Working load. 1 No 2844.00
1222 ELEC-6.5.14 Supply of 8.0 Mtr PSCC Pole 140 Kg Working load. 1 No 1513.00
1223 ELEC-6.5.15 Supply of 175 x 85 mm / 150 x 75 mm RS Joist. 1 Kg 45.00
7.1 NET WORKING
1224 ELEC-7.1.1 Supply of 2 Pair telephone wire of makes Gold Medal 100 Mtrs 1010.00
/ Million / Finolex / Delton / Surabi / Polycab.
1225 ELEC-7.1.2 Supply of 6 Pair telephone wire of makes Gold Medal 100 Mtrs 2800.00
/ Million / Finolex / Delton / Surabi / Polycab.
1226 ELEC-7.1.3 Supply of RG 6 Co-axil cable of makes Finolex / Surabi 100 Mtrs 1700.00
/ Million / Gold Medal / Polycab.
1227 ELEC-7.1.4 Supply of LAN Cable cat - 6 (A) UTP cable of makes D 100 Mtrs 2580.00
Link / KMP / Molex.
1228 ELEC-7.1.5 Supply of Cat 6 RJ-45 information outlets including 1 No 340.00
duel face plate of makes Beldan / D Link / Legrand.
1229 ELEC-7.1.6 Supply of 24 Port switches of D link make 1 No 5200.00
1230 ELEC-7.1.7 Supply of 8 Port switches of D link make 1 No 1125.00
203
SL. SS RATE for

NO. 2010-11
1231 ELEC-7.1.8 Supply of 17U floor mounting net work rack with 1 No 13500.00
power spike including all accessories of make HCL /
Vall.
1232 ELEC-7.1.9 Supply of 42U floor mounting net work rack with 1 No 13500.00
power spike including all accessories of make HCL /
Vall.
1233 ELEC-7.1.10 Supply of 3200 access point of D link make or its 1 No 12500.00
equivalent.
1234 ELEC-7.1.11 Supply of 7 feet length patch cord of makes D link / 1 No 220.00
Beldan / Krone.
1235 ELEC-7.1.12 Supply of 3 feet length patch cord of makes D link / 1 No 200.00
Beldan / Krone.
1236 ELEC-7.1.13 Supply of 24 port patch panels of makes D link / 1 No 6500.00
Beldan / Krone.
1237 ELEC-7.1.14 Supply of 100 pair MDF loaded with 2/10 Modular of 1 No 3000.00
Krone make or its equivalent.
1238 ELEC-7.1.15 Supply of 100 pair raiser cable for telephone of makes 1 Mtrs 275.00
Polycab / Finolex.
8.1 MISSILLANEOUS ITEMS
1242 ELEC-8.1.4 Supply of single fancy bracket with glass shade best 1 No 195.00
Indian make
1243 ELEC-8.1.5 Supply of double fancy bracket with glass shade best 1 No 350.00
Indian make
1244 ELEC-8.1.6 Supply of 10" ceiling fittings with glass doom best 1 No 175.00
Indian make
1245 ELEC-8.1.7 Supply of Bulk head fitting with cast aluminium 1 No 360.00
enamel painted body with water tight, clear glass with
wire guard hinged with lock and key arrangements
etc., complete of makes Bajaj / Crompton / Surya.
1246 ELEC-8.1.8 TW Seperators / Gutties 100 Nos 150.00
1247 ELEC-8.1.9 Rawl Plugs 100 Nos 16.00
1248 ELEC-8.1.10 U Nails 100 Nos 40.00
1249 ELEC-8.1.11 Alluminium Link Clips 144 Nos 50.00
1250 ELEC-8.1.12 50 mm G.I.Nut and Bolts. 1 Set 12.00
1251 ELEC-8.1.13 63 to 100 mm G.I.Nut and Bolts. 1 Set 20.00
1252 ELEC-8.1.14 50 mm 0 Gauge Nails 1 Doz 36.00
1253 ELEC-8.1.15 63 to 100 mm 0 Gauge Nails 1 Doz 60.00
1254 ELEC-8.1.16 Hard Coke 1 Kg 8.00
1255 ELEC-8.1.17 Salt 1 Kg 4.00
1256 ELEC-8.1.18 PVC Cleats 2 Way 100 Nos 300.00
1257 ELEC-8.1.19 PVC Cleats 4 Way 100 Nos 400.00
1258 ELEC-8.1.20 Binding Wire 1 No 50.00
1259 ELEC-8.1.21 PVC / Cotton Insulation tape Role ( 10 Mtrs) 1 No 15.00
1260 ELEC-8.1.22 C.I.Knob 1 No 12.00
1261 ELEC-8.1.23 Stay tight set (Jum bracket 300 mm) Pair 250.00
1262 ELEC-8.1.24 Stay clamp with bolts and Nuts) 1 160.00
Set
1263 ELEC-8.1.25 L.T.Guy insulator 1 No 35.00
1264 ELEC-8.1.26 12 / 15 MS plain rod fan hook 1 No 20.00
1265 ELEC-8.1.27 19 / 20 mm Steel tube fan down rod 1 Rm 60.00
204
SL. SS RATE for

NO. 2010-11
1266 ELEC-8.1.28 Consealed box PVC / MS with hook for fan 1 No 100.00
1267 ELEC-8.1.29 Coil Earthing 1 No 60.00
1268 ELEC-8.1.30 Cable root Indicators 1 No 75.00
1269 ELEC-8.1.31 40 mm x 40 mm x 6 mm angle iron with I bolt. 1 Kg 200.00
1270 ELEC-8.1.32 50 mm x 50 mm x 6 mm angle iron or Flat. 1 Kg 40.00
1271 ELEC-8.1.33 65 mm x 65 mm x 6 mm angle iron or Flat. 1 Kg 40.00
1272 ELEC-8.1.34 Acrylic Cover of size 4" x 7" for night lamps. 1 No 15.00
1273 ELEC-8.1.35 TW / PVC Round Blocks 1 No 6.00
1274 ELEC-8.1.36 G.I.Funnel with Mesh 1/2" x 4" 1 No 75.00
1275 ELEC-8.1.37 Asbestos Sheet 1 Sqft 20.00
1276 ELEC-8.1.38 First Aid box 18" x 12" x 8" 1 No 1000.00
1277 ELEC-8.1.39 11 KV/22 KV Hand gloves 1 No 140.00
1278 ELEC-8.1.40 Copper plate / Copper strip (Per K.G) 1 Kg 390.00
1279 ELEC-8.1.41 No. 8/10 SWG copper wire (per K.G) 1 Kg 390.00
1280 ELEC-8.1.42 PVC Insulated copper winding wire of fine quality (per 1 Kg 550.00
K. G)
1281 ELEC-8.1.43 No. 14 SWG copper wire (per K. G) 1 Kg 390.00
1282 ELEC-8.1.44 Copper winding wire (per K. G) 1 Kg 490.00
1283 ELEC-8.1.45 G. I Strip/ Plate/Wire/ M. S (per K. G) 1 Kg 55.00
1284 ELEC-8.1.46 Alluminum Bus bars/Strips/accessories 1 Kg 185.00
1285 ELEC-8.1.47 Alluminum winding wire 1 Kg 390.00
1286 ELEC-8.1.48 6.2 Volt series bulb (25 Nos.) 25 Nos 83.00
1287 ELEC-8.1.49 6.2 Volt series bulb with navar plate(25 Nos.) 25 Nos 88.00
1288 ELEC-8.1.50 Supply of Rotating machine 1 No 15000.00
1289 ELEC-8.1.51 Supply and fixing of 6mm thick MS Chekered plate. 1 Kg 55.00
1290 ELEC-8.1.52 Supply and fixing of 6mm thick Alluminium Chekered 1 Kg 220.00
plate.
1291 ELEC-8.1.53 Copper old winding Wire scrap for 1 Kg 1 Kg 100.00
1292 ELEC-8.1.54 Cement 1 Kg 4.50
1293 ELEC-8.1.55 Hylam Sheet 1 Sqin 0.50
1294 ELEC-8.1.56 Earth work excacvation including all soils for trench, 1 Cum 200.00
Pole Pit and Earth Pit.
1295 ELEC-8.1.57 Cost of Sand Including Lead 1 Cum 360.00
1296 ELEC-8.1.58 Cost of Bricks with Lead 1000 Nos 3100.00
1297 ELEC-8.1.59 25 MM G.I.PIPE LIGHT GRADE 1 Mtr 207.00
1298 ELEC-8.1.60 25 MM G.I.PIPE MEDIUM GRADE 1 Mtr 220.00
1299 ELEC-8.1.61 40 MM G.I.PIPE LIGHT GRADE 1 Mtr 312.00
1300 ELEC-8.1.62 40 MM G.I.PIPE MEDIUM GRADE 1 Mtr 332.00
1301 ELEC-8.1.63 Drilling of 16 Nos through holes of 12mm dia to G.I 1 No 5.00
pipe
1302 ELEC-8.1.64 G.I Nuts, Bolts an Washers each set 1 Set 10.00
1303 ELEC-8.1.65 18" dia 2" thick hume pipe ring 1 No 200.00
1304 ELEC-8.1.66 18" dia 3" hume pipe ring 1 No 250.00
1305 ELEC-8.1.67 2" thick CC cover for hume pipe ring with handle 1 No 100.00
1306 ELEC-8.1.68 Supply of Saddle / Clamps suitable for fixing 2 Core 4 100 Nos 205.00
to 10 Sqmm Cable.
& 6 Sqmm Cable.
& 16 Sqmm Cable.
1309 ELEC-8.1.71 Supply of Saddle / Clamps suitable for fixing 3.5 Core 100 Nos 315.00
25 & 35 Sqmm Cable.
205
SL. SS RATE for

NO. 2010-11
50 Sqmm Cable.
70 & 95 Sqmm Cable.
120 to 185 Sqmm Cable.
240 & 300 Sqmm Cable.
400 Sqmm Cable.
1315 ELEC-8.1.77 Labour Rates
1316 ELEC-8.1.78 Skilled Electrician 1 No 258.00
1317 ELEC-8.1.79 Semi Skilled Electrician 1 No 237.00
1318 ELEC-8.1.80 Skilled Mason 1 No 258.00
1319 ELEC-8.1.81 Semi Skilled Mason 1 No 237.00
1320 ELEC-8.1.82 Welder 1 No 258.00
1321 ELEC-8.1.83 Fitter 1 No 258.00
1322 ELEC-8.1.84 Helper (Electrical) 1 No 237.00
1323 ELEC-8.1.85 Carpenter 1 No 258.00
1324 ELEC-8.1.86 Man Mazdoor 1 No 196.00
9.1 WIRELESS FIRE ALARAM SYSTEM
1325 ELEC-9.1.1 Supply and fixing of wireless smoke detection control 1 No 44,390.00
panel of 28 wireless zones, 2 Hard wired Zones,
Tamper Alert, Pass code protected, RF jamming
recognition, diagnostic feature for RF signal strength
between panel and each detector, vent reporting
using PSTN telephone line, dialing upto 4 telephone
numbers, event reporting as per users choice, LCD
screen display, two way voice interaction, battery
backup stand by time up to 12 hrs. (Cease
Fire/Ravel/Honeywell/Secutron) Including
transportation, all taxes and all labour charges etc
complete.
1326 ELEC-9.1.2 Supply and fixing of Wireless Repeater.The wireless 1 No 10,485.00
repeater extends the communication range of
detection by relaying data between receiver and
remote wireless transmitter. (Cease
Fire/Ravel/Honeywell/Secutron) Including
complete.
1327 ELEC-9.1.3 Supply and fixing of Wireless Siren Strobe external 1 No 14,680.00
wireless siren - a fully supervised power code outdoor
(IP55) wireless Siren and strobe light. Designed for
external installation. Wire - Free connection between
control panel and siren. Convenient rapid no- mess
installation. Separate fire alarm signals, 98db Piezo
siren and high power strobe light. Weather resistant,
IP55, 2-way communication for local and remote
diagnostics. Plug-in power supply, NIMH rechargeable
back-up power battery, transmits status, tamper, low-
battery, supervisory and AC loss messages to the
control panel, Tri- State tamper switch identifies
screw manipulation removal of cover or playing from
the wall.(Cease Fire/ Ravel / Honeywell / Secutron)
Including transportation, all taxes and all labour
206
SL. SS RATE for

NO. 2010-11
charges etc complete.
1328 ELEC-9.1.4 Supply and fixing of wireless Fully Supervised Smoke 1 No 7,340.00
Detector, Photoelectric detection technology for
superior detection sensitivity , sound and transmitted
for smoke, tamper and low battery, works on power
code protocol, easy programming and enrolling to the
control panel, long life 9 volt alkaline or lithium
battery. (Ceasefire/Ravel/Honeywell/Secutron)
9.2 ADDRESSABLE - FIRE ALARM SYSTEM
1329 ELEC-9.2.1 Supply, Installation, testing and commissioning of wall 1 No 7,25,000.00
mounting 10 loop micro processor based analog
addressable fire control panel expandable by
minimum 2 additional loops with minimum 80
character LCD display 4 access levels
1000 events, historical logging, flash E-PROM, 240
volts A C Power supply, automatic battery charger,
24V SLA batteries suitable for operating the entire
system including tack back units and the
hooters/strobes for a minimum of 4 hours in battery
condition the panel shall have suitable power
amplifiers for hooter / strobes the panel shall be
capable beeing integrated with the BMS system and
shall include cost of supply, installation of any
additional modules or interfaces required for the
same. The panel shall be completed as per the
specification and as required fixing of 10 loop Micro
processor based Fire Alarm control panel with zonal
indictions and battery back up as per detailed
specifications.(Makes: Siemens/Morley/Honeywell-
ESSER-Notifier/Ceasefire/Bosh/APPOLO).
character LCD display 4 access levels 1000 events,
historical logging, flash E-PROM, 240 volts A C Power
supply, automatic battery charger, 24V SLA batteries
suitable for operating the entire system including tack
back units and the hooters/strobes for a minimum of
4 hours in battery condition the panel shall have
suitable power amplifiers for hooter / strobes the
panel shall be capable beeing integrated with the
BMS system and shall include cost of supply,
installation of any additional modules or interfaces
required for the same. The panel shall be completed
as per the specification and as required fixing of 8
loop Micro processor based Fire Alarm control panel
with zonal indictions and battery back up as per
detailed specifications.(Makes:
Siemens/Morley/Honeywell-ESSER-
Notifier/Ceasefire/Bosh/APPOLO).
207
SL. SS RATE for

NO. 2010-11
208
SL. SS RATE for

NO. 2010-11
1335 ELEC-9.2.7 Supply, Installation, testing and commissioning of 1 No 1,25,000.00
Repeater panel including the cost of mounting
accessories complete as per specification as
required.(Makes: Siemens/Morley/Honeywell-ESSER-
1336 ELEC-9.2.8 Supply and fixing of addressable wall mounting 1 No 6,750.00
strobes cum hooters including the cost of mounting
accessories complete as per specifications and as
required including testing and commissioning.
1337 ELEC-9.2.9 Supply and instllation of addressable analog photo 1 No 6,700.00
electric smoke detector including cost of base plate
etc., complete as per specification with required
fittings and accessories.(Makes:
1338 ELEC-9.2.10 Supply of plug - in type in rate of rise cum fixed 1 No 5,325.00
temparature addressable analogue heat detectors
including the cost of base plate. 75mm dia MS outlet
box for fixing of the detector base, mounting
accessories etc., complete as per specifications and as
1339 ELEC-9.2.11 Supply of plug - in type addressable analogue multi 1 No 6,500.00
criterion detectors below false ceiling/on ceiling
including the cost of base plate. 75mm dia MS outlet
209
SL. SS RATE for

NO. 2010-11
box for fixing of the detector base, mounting
accessories etc., complete as per specifications and as
1340 ELEC-9.2.12 Supply of Control Modules including the cost of 1 No 5,500.00
mounting accessories complete as per specifications
and as required.(Makes: Siemens/Morley/Honeywell-
1341 ELEC-9.2.13 Supply of monitor modules including the cost of 1 No 5,500.00
and as required.(Makes: Siemens/Morley/Honeywell-
1342 ELEC-9.2.14 Supply of fault isolator modules including the cost of 1 No 4,500.00
and complete as required.(Makes:
9.3 CONVENTIONAL - FIRE ALARM SYSTEM
1343 ELEC-9.3.1 Supply, Installation, testing and commissioning of 1 No 7,500.00
conventional Micro processor based Fire Alarm panel
with 2 zone, 12V SMF batteries etc., complete with all
standard accessories. (Makes: Honeywell-ESSER-
Notifier / APPOLO / Morley / System Censor / Ravel.)
1344 ELEC-9.3.2 Supply, Installation, testing and commissioning of 1 No 9000.00
with 10 zone, 12V SMF batteries etc., complete with
all standard accessories. (Makes: Honeywell-ESSER-
1350 ELEC-9.3.8 Supply of Repeater panel including the cost of 1 No 12500.00
210
SL. SS RATE for

NO. 2010-11
and as required.(Makes: Honeywell-ESSER- Notifier /
APPOLO / Morley / System Censor / Ravel.)
1351 ELEC-9.3.9 Supply of addressable wall / ceiling mounting strobes 1 No 675.00
cum hooters including the cost of mounting
accessories complete as per specifications and as
required.
1352 ELEC-9.3.10 Supply of dust and vermin proof addressable 1 No 650.00
analogue manual call boxes to initiate audio visual
alarm including the cost of mounting accessories
complete as per specifications and as required.
1353 ELEC-9.3.11 Supply of plug - in type multi criterion detectors 1 No 1800.00
below false ceiling / on ceiling including the cost of
base plate. 75mm dia M.S. outlet box for fixing of the
detector base. Mounting accessories etc., complete as
per specifications as required.(Makes: Honeywell-
ESSER- Notifier / APPOLO / Morley / System Censor.)
1354 ELEC-9.3.12 Supply of plug -in type photoelectric smoke detectors 1 No 1750.00
above false ceiling including the cost of base plate.
75mm dia MS outlet box for fixing of the detector
base. Mounting accessories etc complete and as per
specifications and as required.(Makes: Honeywell-
1355 ELEC-9.3.13 Supply of plug -in type rate of rise cum fixed 1 No 1700.00
temperature heat detectors including the cost of base
plate. 75mm dia MS outlet box for fixing of the
detector base, mounting accessories etc., complete as
per specifications and as required.(Makes: Honeywell-
9.4 FIRE EXTINGUISHERS
1356 ELEC-9.4.1 Supply and fixing of ABC stored pressure squeeze grip 1 No 9,483.00
type fire extinguishers, 10 kg capacity, ISI CE marked
Is:13849 filled with ABC Mono Ammonium Phosphate
base powder-90 pressurized with dry Nitrogen Gas at
15 Kg / sqcm complete with discharge hose and wall
mounting bracket, Insta Alert facility, 2mm Mild Steel,
EPDM Rubbers, Pressure Guage, which work
effectively on all class of fires (A, B, C & Electrical
fires) with 5 years warranty (Cease Fire / Maxon /
LPG make) Including transportation, all taxes and all
labour charges etc complete.
1357 ELEC-9.4.2 Supply and fixing of ABC stored pressure squeeze grip 1 No 6,730.00
type fire extinguishers, 10 kg capacity, ISI CE marked
Is:13849 filled with ABC Mono Ammonium Phosphate
base powder-50 pressurized with dry Nitrogen Gas at
15 Kg / sqcm complete with discharge hose and wall
mounting bracket, 2mm Mild Steel, EPDM Rubbers,
Pressure Guage, which work effectively on all class of
fires (A, B, C & Electrical fires) with 2 years warranty
(Minimax / Safex / Reliance make) Including
complete.
1358 ELEC-9.4.3 Supply and fixing of ISI make ABC Power MAP 5 Kg 1 No 6,485.00
Fire extinguisher Mono ammonium phosphate power
211
SL. SS RATE for

NO. 2010-11
90, stored pressure type, pressure gauge gross wt. 8
kg, empty wt.3 kg, can Ht.449mm, Diameter 150mm,
Discharge time less than 15 sec, controllable
discharge mechanism, range min. 4 mts applicable on
classes A,B, C & electrically started fires, A- rating
144A, B-rating 89B, can construction: Deep drawn
Co2 mig welding, wall construction: Forging &
Machining, internal coating of can: Epoxy power
coating, External coating of Can:Epoxy polyster
powder coating, sheet metal thickness:1.80mm,
Helium leakage detection tested, insta - alert, ISI & EN
approved with 5 years warranty (Cease Fire / Maxon
/ LPG make) Including transportation, all taxes and all
classes A,B, C & electrically started fires, A- rating
144A, B-rating 89B, can construction: Deep drawn
Co2 mig welding, wall construction: Forging &
Machining, internal coating of can: Epoxy power
coating, External coating of Can:Epoxy polyster
powder coating, sheet metal thickness:1.80mm,
Helium leakage detection tested, ISI & EN approved
with 2 years warranty (Minimax / Safex / Reliance
make) Including transportation, all taxes and all
classes A,B, C electrically started fires, A- rating 144A,
B-rating 89B, can construction: Deep drawn Co2 mig
welding, wall construction: Forging & Machining,
internal coating of can: Epoxy power coating,
External coating of Can:Epoxy polyster powder
coating, sheet metal thickness:1.80mm, Helium
leakage detection tested, insta - alert, ISI & EN
approved with 5 years warranty (Cease Fire / Maxon
/ LPG make) Including transportation, all taxes and all
classes A,B, C electrically started fires, A- rating 144A,
B-rating 89B, can construction: Deep drawn Co2 mig
212
SL. SS RATE for

NO. 2010-11
welding, wall construction: Forging & Machining,
internal coating of can: Epoxy power coating,
External coating of Can:Epoxy polyster powder
coating, sheet metal thickness:1.80mm, Helium
leakage detection tested, ISI & EN approved with 2
years warranty (Minimax / Safex / Reliance make)
1362 ELEC-9.4.7 Supply and fixing of ISI make Ceiling Mounted ABC 1 No 6,973.00
MAP 90, 5 Kg stored pressure type, pressure gauge,
Gross Wt.7.7 kg, Empty Wt.2.7 kg, Can Ht226mm , Dia
230mm, Discharge time : less than 8 sec, Auto
discharge mechanism on temperature rise, Applicable
on A,B,C, & Electrically - started fires, Can
Construction: Forging & Machining, Internal coating of
Can: Epoxy Power coating, External Coating of Can:
Epoxy Polyster powder coating, sheet metal
thickness:1.80mm , Helium leakage detection tested,
Insta - alert, ISI & EN approved with 5 years warranty
(Cease Fire / Maxon / LPG make) Including
complete.
1363 ELEC-9.4.8 Supply and fixing of ISI make Ceiling Mounted ABC 1 No 5,620.00
MAP 50, 5 Kg stored pressure type, pressure gauge,
Gross Wt.7.7 kg, Empty Wt.2.7 kg, Can Ht226mm , Dia
230mm, Discharge time : less than 8 sec, Auto
discharge mechanism on temperature rise, Applicable
on A,B,C, & Electrically - started fires, Can
Construction: Forging & Machining, Internal coating of
Can: Epoxy Power coating, External Coating of Can:
Epoxy Polyster powder coating, sheet metal
thickness:1.80mm , Helium leakage detection tested,
ISI & EN approved with 2 years warranty(Minimax /
Safex / Reliance make) Including transportation, all
taxes and all labour charges etc complete.
1364 ELEC-9.4.9 Supply and fixing of 2 Kg Fire exitinguisher Clean 1 No 14600.00
Agent HFC 236, Zero ODP, Stored pressure type,
pressure guage, gross weight 3.6Kg empty weight 1.6
Kg, can weight 341mm, Diameter 108mm, discharge
time minimum 6 secs, controllable discharge
mechanism, range minimum 2 meters, applicable on
class A,B,C and electrically started Fire, A rating 5A, B
rating 34B, can construction: Deep drawn & CO2 mig
welded, Valve construction: Forging & Machining,
Internal coating of Can: Epoxy powder coating,
External coating of can: Epoxy polyster powder
coating, sheet metal thickness: 1.60 mm, Helium leak
detection tested, 5 Years warranty.(Makes: Ceasefire
/ Maxon / LPG)
1365 ELEC-9.4.10 Supply and fixing of 4 Kg Fire exitinguisher Clean 1 No 25700.00
Agent HFC 236, Zero ODP, Stored pressure type,
pressure guage, gross weight 6.9Kg empty weight 2.9
Kg, can weight 435mm, Diameter 140mm, discharge
time minimum 9 secs, controllable discharge
213
SL. SS RATE for

NO. 2010-11
mechanism, range minimum 4 meters, applicable on
class A,B,C and electrically started Fire, A rating 8A, B
rating 55B, can construction: Deep drawn & CO2 mig
welded, Valve construction: Forging & Machining,
Internal coating of Can: Epoxy powder coating,
External coating of can: Epoxy polyster powder
coating, sheet metal thickness: 1.60 mm, Helium leak
detection tested, 5 Years warranty.
1366 ELEC-9.4.11 Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg 1 No 10,485.00
capacity confirming to IS 2878 made from ISI marked
steam less cylinder confirming to IS:7285 & CE
certified and fitted with ISI marked controlled valve
confirming to IS:3224, high pressure 1 Mtr discharge
hose & horn complete with initial gas charged with
carrying handle with wheels and wall mounting
bracket. Squeeze lever discharge, used un-used
indicator, Aphoxy coated paint (Red) with 93% gloss
with 2 years warranty (Cease Fire / Maxon / LPG
1367 ELEC-9.4.12 Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg 1 No 7,860.00
capacity confirming to IS 2878 made from ISI marked
steam less cylinder confirming to IS:7285 & CE
certified and fitted with ISI marked controlled valve
confirming to IS:3224, high pressure 1 Mtr discharge
hose & horn complete with initial gas charged with
carrying handle with wheels and wall mounting
bracket. Squeeze lever discharge, used un-used
indicator, Aphoxy coated paint (Red) with 93% gloss
with 2 years warranty (Minimax / Safex / Reliance
1368 ELEC-9.4.13 Supply and fixing of DCP powder type cylindrical 1 No 2100.00
shape fire extinguisher 2 Kg with fixing hangers, hose,
brackets, screws to required size etc., complete as per
IS:13849 - wall mounted
type.(Makes:Minimax/Safex/Reliance/Kenex)
shape fire extinguisher 5 Kg with fixing hangers, hose,
brackets, screws to required size etc., complete as per
IS:13849 - wall mounted
shape fire extinguisher 10 Kg with fixing hangers,
hose, brackets, screws to required size etc., complete
as per IS:13849 - wall mounted
1371 ELEC-9.4.16 Supply and fixing of Escape signage boards in Rigid 1 No 1300.00
Photo luminecent based glow in Dark rigid sheet with
high intensity luminous properties with specificaiton
oif Cease Fire or its equivalent make Model-1ES01
1372 ELEC-9.4.17 Supply and fixing of Cease fire or its equivalent Escape 1 No 15800.00
gear Mild Steel box size 425mmx360mmx140mm
Epoxy powder coated to protect it from Weathering ,
214
SL. SS RATE for

NO. 2010-11
smoke hood tested to Eupropean Standard EN 403
1993-S known to reduce Carbon Monoxide,
propend(acrloein), hydrogen chloride, hydrogen
Cyanide and Solid and liquid toxic particles to
manageable level for atleast 15 minutes shall with
stand tempeartures upto 80 degrees single use only
Fire Blanket size 1.2m x1.8m used to cover any vessel
containing used to Extinguish a clothing fire wrap
blanket around the victim.
1373 ELEC-9.4.18 Supply and fixing of 4Nos of 9 Ltrs capacity round 1 Set 1200.00
bottom sand buckets along with bucket sand, Fire
buckets with round bottom type enamel painted,
white inside & red out side and letter FIRE inblack out
side & Handle with mounting bracket.
1374 ELEC-9.4.19 Supply anmd fixing of Fire bucket stand fabricated by 1 Set 1000.00
M.S. angles to install for two numbers of buckets as
per local fire officers standards.
1375 ELEC-9.4.20 Supply and run of 2 Core x 1.5Sqmm FRLS armoured 1 Mtr 78.00
copper cable partly on wall and partly in ground
including all labour charges etc., complete of Polycab
/ RPG / Finolex / Havells / Paragon / V-Guard /
Fortune Art Makes.
10.1 GENERATORS
1376 ELEC-10.1.1 Supply, Transportation, erection and commissioning 1800000.00
of 3 Phase, 415, 50Hz, water cooled multi cylinder
diesel generator set with alternator of 250 KVA / 200
KW out put contineous rating directly coupled Engine
and Alternator with guard and mounted on a common
base plate of Robust construction and complete with
control panel having IP-52 protection, Acoustic
Enclosure made of 18 SWG CRCA sheet, sound
absorbing material, rock wool, perforated sheet to
restrict sound level up to 75 dB and as per PCB norms
etc as per following specifications mentioned below.
A. Alternator : Kirloskar / Stamford / Crompton
Greaves make. The alternator of the output rating
shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at
1500 RPM. The alternator is self excited, self
regulated, and shall confirm to IS: 13364 of 1992 with
regulation of +5% from no load to full load. degree of
protections shall be IP21.
B.Diesel Engine : Kirloskar / Cummins / Ashok ley land
/ Mahindra Diesel Engine start, developing suitable
313 BHP output at 1500 RPM with class A2 Governing
so as to enable the alternator to give 250 KVA
continuous output at 0.8 P.F. lagging at NTP
conditions. The diesel engine shall be capable of
providing 10% O/L for 1 Hr for every 11 Hrs of
continuous running at full load. The engine with 1st
filling of oil and Diesel etc.
1. 2 Batteries of 12V 180 AH of Exide / Amar Raja
make.
2. Exhaust pipe of required size and length with
insulation or clading.
215
SL. SS RATE for

NO. 2010-11
3. Diesel tank suitable for 12 hrs running capacity.
4. Residential Silencer.
C. AMF Control Panel:- AMF control panel shall be
fabricated with 16SWG CRCA sheet shall be totally
enclosed with dust and Vermin proof, floor mounted /
wall mounted type and shall be comprising the
following.
1. Voltmeter with selector switch.
2. 4 Pole MCCB incomer of 400A rating of Legrand
make.
3. Ammeter with selector switch with CTs.
4. PF Meter and frequency Meter.
5. Indicator lamps (set Run, Load ON) with fuses.
6. KWH Meter of required rating.
7. Set of control fuses and current transformer.
8. Input Terminal board and output Terminal Board.
9. Battery charger with transformer rectifier unit.
10. Alternator supply air break contactor of L&T
make.
11. Main supply air break contactor of L&T make.
12. Audio Visual announciation for low lube oil
pressure.
13. Main supply voltage set of control relays and
timers with one mode selector switch, set of push
buttons.
diesel generator set with alternator of 125 KVA / 100
A.Alternator : Kirloskar / Stamford / Crompton
/ Mahindra Diesel Engine start, developing suitable
156 BHP output at 1500 RPM with class A2 Governing
so as to enable the alternator to give 125 KVA
1. Batteries of 12V 180 AH of Exide / Amar Raja make.
216
SL. SS RATE for

NO. 2010-11
C. AMF Control Panel: - AMF control panel shall be
following.
2. 4 Pole MCCB incomer of 200A rating of Legrand
make.
make.
pressure.
buttons.
diesel generator set with alternator of 62.5 KVA / 50
A. Alternator : Kirloskar / Stamford / Crompton
/ Mahindra Diesel Engine start, developing suitable 78
BHP output at 1500 RPM with class A2 Governing so
as to enable the alternator to give 62.5 KVA
1. Batteries of 12V 180 AH of Exide / Amar Raja make.
217
SL. SS RATE for

NO. 2010-11
C. AMF Control Panel: - AMF control panel shall be
following.
2. 4 Pole MCCB incomer of 125 A rating of Legrand
make.
make.
pressure.
buttons.
NOTE
1 All the items to be used on work are of first quality & ISI and as approved by the Engineer In charge of the
work.
2 Supply Rates for all the materials are based on market rates plus Sales Tax/ Material VAT.
3 Works Contract VAT for General/ Composition Scheme on finished items may be allowed as applicable.
4 SOR Rates for Building items are purely for guidance for the officers for preparation of estimates vide
para.113 of APPWD code. Authority who prepares the estimate is however responsible for proper rates as
envisaged in para.45 of APPWD code.
CODE LEGEND
"ELEC" -X.X.XX "ELEC" for Electrical items
XXX-"1".X.XX "1" for Name of the Section
XXX-X."1.01" "1.01" for Serial of the Item
218
Common SoR-2010-11
SCHEDULE OF RATES
AS PER
A.P. REVISED STANDARD DATA
FOR THE YEAR 2010-2011
(Effective from 1st June, 2010)
BOARD OF CHIEF ENGINEERS

219
Common SoR-2010-11
Office of the Engineer-in-Chief (I.W.)

I & CAD Dept., Errum manzil, Hyderabad.
Procs.No.ENC/IW/P&M/EE3/DEE10/AE/13305/10/Vol-30 , dt: 15-7-2010.
Sub:- Schedule of Rates as per Revised Standard Data for the year 2010-11 – Irrigation &
CAD works (part-1) and Drinking water supply schemes (part-4) - approved- Printing &
Communication of SoRs – Reg.,
Ref:- 1. G.O.Ms.No.49, I & CAD (PW: Reforms) Dept., dt:.2-3-2009.

2. E-in-C (PH) Lr.No.146/SOR/2010-11/Vol-1/T1/2010 Dt.24.05.2010.
3. Commissioner, labour department Lr.No:N1/2723/2010, dt: 05- 05-2010.
4. Minutes of B.O.CE’s meeting for Schedule of Rates held on dt.29-5-2010&22-6-10.
-o0o-
The Government have approved Revised Standard Data vide ref 1st cited. The Schedule of
Rates as per A.P. Revised Standard Data for the year 2010-11 is approved based on the following.
The Engineer-in-Chief, Public health Department has furnished draft rates for Public Health
Work Items and Public Health materials vide ref 2nd cited.
For Irrigation & CAD Work Items, the regional Superintending Engineers of Irrigation Circles of
Hyderabad, Chittoor & Dowlaiswaram in charge of Telangana, Rayalaseema and Andhra regions
respectively have submitted the draft basic rates of materials. The Superintending Engineer,
Mechanical Circle, Hyderabad has furnished draft rates of mechanical and workshop items.
Accordingly, the draft rates for Irrigation & Command Area Development are prepared.
The labour rates are obtained from the Commissioner, labour department vide reference 3rd
cited for finalizing the rates for SoR 2010-11.
Based on the proposals, the draft Schedule of Rates for the year 2010-11 were reviewed and
finalized in the annual Board of Chief Engineers meeting held on 29-5-2010 & 22-6-2010.
The Procedure for the adoption of Irrigation work items, lead & lift charges (Common to all
departments) is incorporated in the Annexure-A of SoR.
One hard copy & compact disc containing Schedule of Rates & Standard data-Part-1(soft copy)
are here with communicated. No other items other than the items communicated by this Office shall
be introduced in the SoR.
220
Common SoR-2010-11
The Heads of Department and Officers mentioned below are authorized to print the Schedule
of Rates for the year 2010-11. The unauthorized printing & selling of the SoR is strictly prohibited.
The Schedule of Rates for 2010-11 will be in force until the new SoR comes in to force.
The revised rates will come into force from 1st June of 2010.
The receipt of the proceedings may be acknowledged.
Encl: Annexure-A.
Sd/-
M.K.Rahaman,15-7-2010
Engineer-In-Chief (IW)
Chairman, B.O.C.E (SoR)
I) Copy Communicated to the following Heads of Departments along with Enclosures for information.
1) Engineer-in-Chief (Admn & NH)., Roads & Buildings Department.
2) Engineer-in-Chief (P.H.), Public Health Department.
3) Engineer-in-Chief (P.R.), Panchayath Raj Department.
4) Engineer-in-Chief (RWS) R W S, Department.
5) Chief Engineer (Buildings), R&B Department.
6) Copy of C.D containing Schedule of Rates 2010-11 & Standard data, part-1(Irrigation &CAD works)
to all Engineers-in-Chief, Chief Engineers of Irrigation & CAD Department for favour of
information.
II) Copy to The Superintending Engineer, Irrigation Circle, I&CAD Department,
Red Hills, Hyderabad for necessary action.
Sd/-
M.K.Rahaman,15-7-2010
Chairman, B.O.C.E (SoR)
221
Common SoR-2010-11
Important – Read The following
ANNEXURE- A
1) The SPIU(Irrigation), Centre for Good Governance (CGG), Hyderabad has developed soft ware
package linking the basic input data of Irrigation with approved data of Irrigation work
items.
2) The lead and lift charges are common to all Engineering Departments. The detailed
calculations are incorporated in the Lead &Lift charges chapter in the I&CAD works (Part-1)
of A.P. Revised standard data.
3) Further, the CGG has also developed estimate preparation package to use in the preparation
of estimates duly making provision for incorporation of applicable lead & lift for different
materials, Area allowances for labour, Dewatering charges and VAT as additional.
4) For Gates & Hoist works, the excise duty on the fabrication of work (other than materials)
shall be added as per the Government Orders issued from time to time while preparing the
estimate.
5) The estimate sanctioning authority shall physically verify each and every Irrigation work item
data incorporated in the estimate with basic input data before sanction of the estimate. Any
lapses or arithmetic errors arising in the sanction of data’s / estimate due to adoption of
the software package lies entirely on the concerned estimate sanctioning authority only.
6) Any discrepancies / corrections required for improper basic input data appearing in the
approved data’s of Irrigation work items in the software package and hard copy of SoR &
Standard data’s (part-1) may be brought to the notice of undersigned for issuing corrections.
Sd/- M.K.Rahaman,15-7-2010
Chairman, B.O.C.E (S.R)
222
Common SoR-2010-11
INDEX
Sl. Page No.

Description
No. From To
1 Preamble 220 223
2 Labour Rates 224 227
Basic input data for Irrigation work items & materials
3 228 246
other than covered under Irrigation
4 Building items 247 247
5 Public Health Items 248 315
6 Conveyance Charges of Materials 316 319
7 Hire Charges of Plant & Machinery 320 322
8 Annexure (Seigniorage Charges) 323 326
223
Common SoR-2010-11
PREAMBLE
224
Common SoR-2010-11
PREAMBLE
I.0 AREA ALLOWANCES:
A) CORPORATIONS & MUNICIPALITIES:
a) (i)25% extra over the rates on labour component of works is allowed in all Municipal
Corporation Limits of Andhra Pradesh except Greater Hyderabad, Greater Visakhapatnam and
Vijayawada municipal corporations( up to a belt of 12 Kms. from Municipal Corporation limits )
and other corporations as notified by the Government from time to time.
(ii) 40% extra over the rates on labour component of works for Greater Hyderabad , Greater
Visakhapatnam and Vijayawada Municipal Corporation ( up to a belt of 12 Kms. from Municipal
Corporation limits ).
b) Allow 20% extra over basic rates on labour component of works in all District Headquarters
and the remaining Municipal limits ( up to a belt of 12 Kms from Municipal limits ).
c) For works at Tirumala Hills in Chittoor District, 40% extra over the basic rates of labour
component is allowed.
d) For works at Horsely hills in Chittoor District, 30% extra over the basic rates of labour
component is allowed.
e) For works located inside Tirumala Temple, 20% extra over the basic rate of labour component
specified for Tirumala Hills is allowed.
f) For Works located inside T.T.D Temples of Sri Padmavathi Ammavari Temple, Tiruchanoor, Sri
Govindaraja Swamy Temple at Tirupathi, Sri Kapleswara Swamy Temple, Kapilatheerthm,
Tirupathi and Sri Kalyana Venkateswara Swamy Temple, Srinivasa Mangapuram , 20% extra
over the basic rates of labour component for Tirupathi Municipal Corporation is allowed.
B) JAIL COMPOUNDS:
15% extra is allowed over labour rates for the work in the Jail compounds. Only equivalent
number of Man Mazdoor shall be provided in the Jail premises and no women Mazdoor are
allowed inside.
C) INDUSTRIAL AREA:
a. 20% over basic rates on labour component works allowed for works situated within 10 Kms belt
of Industrial area of, Jeedimetla, Lingampally, Ibrahimpatnam,Tandur in Ranga Reddy District,
Ibrahimpatnam, Vuyyuru, Jaggaiahpeta in Krishna District, Macherla, Gurajala, Challapalli in
Guntur District Garividi in Vijayanagaram District, Kothur in Mahabubnagar District,
Patancheru, Ramachandrapur in Medak District, Bibinagar in Nalgonda District, Ramagundam
and Godavarikhani in Karimnagar District, Renigunta in Chittoor District and Yerraguntla &
Mangampet in Kadapa District, Manchiryal, Mandamarri, Bellampalli in Adilabad District,
Sarpaka, Kothagudem, Paloncha, Manguguru, Singareni Collieries in Khammam District,
Kamalapur, Bhoopalpally of Warangal District, Wadepally of Nalgonda District,
Nagapally(Centenary Colony, Begumpet “X” roads),Takkelapally of Karimnagar District,
Hindupur, Tadipatri, Anantapur, Guntakal, Rayalcheruvu, Yadiki of Anantapur District and
Adoni, Dhone, Cement Nagar, Nandyal, Kurnool, Yemmiganur & Bethamcherla of Kurnool
District ,Anakapally of Vishakhapatnam District.
D) AGENCY / TRIBAL AREAS:
225
Common SoR-2010-11
a) 25% extra is allowed for the works located with in the interior Agency / Tribal limits, i.e. for the
works located with in & upto16 KMs from any all weather route inside Agency / Tribal.
b) 40% extra is allowed for the works located with in the interior Agency / Tribal limits, i.e. for the
works located beyond 16 KMs from any all weather route inside Agency / Tribal.
NOTE: 1. No extra percentage is permissible in respect of Forest produce such as Bamboo, Rellu grass
and for all materials obtained from outside the Agency / Tribal.
2. The extra percentage under Agency / Tribal areas allowance may be allowed on the labour
component and on the labour charges in the rates for conveyance of materials.
3. The extra percentage on cost of materials in Agency / Tribal areas can be allowed on the
labour component only, if they are manufactured in the Agency / Tribal areas itself except
Forest produce.
E) GHAT ROADS:
For Ghat Roads steeper than 1 in 20, the length of the road may be taken as 1.5 times the
existing length of the road for the purpose of leads only for conveyance of materials based on
the certificate for the Ghat Road given by the Superintending Engineer concerned.
Foot Note: Under compelling circumstances, the concerned Chief Engineer can adopt the equivalent
length of road as 2 ½ times of actual length.
Note below area allowances:
If more than one area allowance ( such as those ) for (1) Municipalities (2) Agency / Tribal areas
(3) Industrial areas are applicable for a particular situation, only the maximum out of the
allowable percentages is to be allowed.
2.0 EXCAVATION OF TRIAL TRENCHES, TRIAL PITS AND EXCAVATION IN RESTRICTED PLACES: -
I) EXCAVATION OF TRIAL TRENCHES, TRIAL PITS AND EXCAVATION IN RESTRICTED PLACES: -
A. TRIAL TRENCHES:
1) Trial trenches of not more than 2 metres in width … 25% extra
B. TRIAL PITS:
1) Up to 2 Metres depth … 25% extra
2) 2 Metres to 4 Metres depth … 50% extra
6) More than 9 Metres depth … 200% extra
II) EXCAVATION IN RESTRICTED PLACES:-
I) Foundation of Buildings … 75% extra
II) For pipe lines where the depth is less … 75% extra
than 1.5 times the width
III) For pipe lines where the depth is … 120% extra
1.5 times or more than the width
IV) Silt removal in restricted areas such … 120% extra
U. T’s., Culverts and Syphons.
V) Excavation of field channels … 75% extra
VI) For narrow trenches not more than
2 meters in width and depth not less
than twice the width and for excavation … 75% extra
of road boundary drains, model sections
of canals.
VII) High berm cutting of not more than … 50% extra
150 mm average thickness and
226
Common SoR-2010-11
sectioning for roads

Note: 1) The extra percentage is allowed over S. S. 20 B rate for corresponding soil. It includes the
charges for all lifts and initial lead but does not include dewatering charges if any in respect
of all the items under ( A) and (B) above.
2) The above extra percentages in respect of excavation in hard rock for restricted places are
to be allowed for (2/3) rd of the cost and shall not to be allowed in respect of items
involving blasting component which may be taken as 1/3 of the cost.
3.0 SEIGNIORAGE CHARGES:
Seigniorage charges for materials as fixed by the Government in G.O.Ms.No.198 (Industries and
Commerce department), dated 13. 8.2009 may be added in the data of rates in the estimate. In case of
revision, the revised rates as fixed by Mines and Geology Department have to be adopted.
227
Labour rates
LABOUR RATES
228
Labour rates
LABOUR RATES
Sl S. Rate for
CATEGORY OF WORKER
No. 2010-11
1 2 3
I. SKILLED CATEGORY:
1 Bar bender 258.00
2 Black smith / Tin smith / Rivetor 258.00
3 Blaster ( Licensed ) 258.00
4 Carpenter Cl- I 258.00
5 Electrician ( Licensed ) 258.00
6 Fitter Cl- I 258.00
7 Floor Polisher / Tile Layer 258.00
8 Foreman 258.00
9 Gauge reader 237.00
10 Maistry / Work Inspector with Non-technical Qualification SSLC/SSC/HSC 250.00
11 Mason Cl- I / Brick layer Cl- I 258.00
12 Mechanic Cl- I 258.00
13 Operator Air compressor / DG set 258.00
14 Operator Batching plant 258.00
15 Operator Bus/Ambulance/ Lorry/ Tanker 257.00
16 Operator Concrete / Asphalt mixer 258.00
17 Operator Concrete / Asphalt paver 258.00
18 Operator Concrete pump / Placer/ ice plant 258.00
19 Operator Core drilling machine 258.00
20 Operator Crane/ Tower crane/ Cable way 258.00
21 Operator Drilling jumbo / Loco / Winch 258.00
22 Operator Grouting/ Guniting/ Shotcreting 258.00
23 Operator Jackhammer/Pneumatic tamper 258.00
24 Operator Pump / Ventilation fan 258.00
25 Operator Lathe/Drilling/Shearing machine 258.00
26 Operator Bending / Planing machine 258.00
27 Operator Road roller 257.00
28 Operator Shovel / Scraper / Dozer 258.00
29 Operator Spillway / Sluice gate 258.00
30 Operator Crusher / Conveyor / Mucker 258.00
31 Operator Tipper / Dumper / Transit mixer 277.00
32 Operator Concrete vibrator 258.00
33 Operator Vibratory plain / pad foot roller 257.00
34 Operator Wagon drill / Drifter 258.00
35 Painter Cl- I 258.00
36 Plumber ( Licensed ) / Pipe fitter 258.00
37 Sarang / Khalasi 258.00
38 Spun pipe moulder 258.00
39 Stone chiseller CI- I / Stone cutter Cl- l 258.00
40 Struct. steel Fabricator / Marker / Erector 258.00
41 Welder / Gas Cutter 258.00
42 Welder (X-ray quality) 258.00
II. SEMI SKILLED CATEGORY:
1 Asphalt Sprayer / Boiler attendant 237.00
2 Bhisti 237.00
3 Boatman with boat 247.00
4 Carpenter Cl- II / Erector shuttering 237.00
229
Labour rates
Sl S. Rate for
CATEGORY OF WORKER
No. 2010-11
1 2 3
5 Cartman with double bullock cart 277.00
6 Cartman with single bullock cart 256.00
7 Chavali / Navagani 237.00
8 Crowbarman / Jumper man 237.00
9 Fitter Cl- II 237.00
10 Gang man / Head / Survey mazdoor 237.00
11 Gardener / Trained mali 237.00
12 Helper Air compressor / DG set 237.00
13 Helper Batching plant 237.00
14 Helper Blasting 237.00
15 Helper Bus/ Ambulance/ Lorry/ Tanker 237.00
16 Helper Bending/Shearing/Planing machine 237.00
17 Helper Carpenter 237.00
18 Helper Concrete / Asphalt mixer 237.00
19 Helper Concrete / Asphalt paver 237.00
20 Helper Core drilling machine 237.00
21 Helper Crane/ Tower crane/ Cable way 237.00
22 Helper Drilling jumbo / Loco / Winch 237.00
23 Helper Fitter / Fabrication 237.00
24 Helper Grouting/ Guniting/ Shotcreting 237.00
25 Helper Jack hammer / Pneumatic tamper 237.00
26 Helper Laboratory / Instrumentation 237.00
27 Helper Road roller 237.00
28 Helper Shovel / Scraper / Dozer 237.00
29 Helper Crusher / Conveyor / Mucker 237.00
30 Helper Tipper / Dumper/ Transit mixer 237.00
31 Helper Vibrator 237.00
32 Helper Vibratory plain/ pad foot roller 237.00
33 Helper Wagon drill/ Drifter 237.00
34 Lineman Electric / Telephone 237.00
35 Mason Cl- ll / Brick layer Cl-II 237.00
36 Mechanic Cl- II 237.00
37 Painter Cl- II 237.00
38 Patkari / Neeraganti / Sowdy 237.00
39 Stone Chiseller Cl- II 237.00
40 Stone breaker / Hammer man 237.00
41 Valve man / Canal sluice operator 237.00
III. UN-SKILLED CATEGORY:
1 Cement / Asphalt handling mazdoor 196.00
2 Civic worker 196.00
3 Heavy mazdoor 196.00
4 Light mazdoor 196.00
5 Watchman 196.00
IV. OTHER CATEGORY:
1 Care-taker / conductor / Lift Attender 237.00
2 Cook / Mess man 237.00
3 Dhobi 237.00
4 Diploma Engineer / Surveyor 350.00
5 Diver with headgear 288.00
6 Graduate / Laboratory Assistant 288.00
7 Graduate Engineer/ Geologist 400.00
8 Horticulture Assistant / Photographer 250.00
230
Labour rates
Sl S. Rate for
CATEGORY OF WORKER
No. 2010-11
1 2 3
9 ITI certificate holder / Tracer / Printer 288.00
10 Literate mazdoor 237.00
11 Stenographer / Computer Operator 300.00
12 Telephone / Wireless Operator 288.00
13 Typist / Job Typist 288.00
NEW ITEMS:
CAD operator with Diploma in Engineering/General degree with CAD
350.00
14 certificate
15 Jeep Driver 250.00
Note: - 1) The wage should not be less than the minimum wages of schedule of employment, subject
to out turn. 2) 25% extra over the corresponding labour rates in respect of the work to be done during
night time subject to issue of certificate accordingly by the concerned estimate sanctioning authority for
providing in the data and by concerned Executive Engineer in charge of the work for payment. The night
time allowance is applicable only to the works done under Greater Hyderabad Municipal Corporation,
Greater Visakhapatnam Municipal Corporation and Vijayawada Municipal Corporation limits only.
231
Basic Input Data Irrigation
BASIC INPUT DATA

FOR
IRRIGATION WORK ITEMS
232
STATEMENT OF RATES FOR MATERIALS
FOR THE YEAR : 2010-11
GENERAL GUIDE LINES FOR REVISING RATES OF MATERIALS:
1 Average of the prevailing market rates, ignoring freak rates, is the criteria for
Fixing market rates for materials.
2 The rates for materials is inclusive of all taxes, duties and other local levies.
3 The rates for materials is inclusive of seigniorage charges wherever applicable.
4 The rates for materials, except those for which lead charges are admissible as per the
Statement of lead charges is for all leads.
5. The rates provided for useful rubble / stone chips from excavation shall be at dump
yard.
S. Rate
Sl No. DESCRIPTION OF MATERIAL UNIT for
2010-11
1 2 3 4
1 Acetylene gas cum 250.00
2 Asphalt 80/ 100 Grade Kg 30.00
3 Binding wire Kg 52.00
4 Burnt stone slab 10 cm thick sqm 210.00
5 Cement 43 Gr (including loading charges) tonne 3,700.00
6 Chequered plate Kg 40.00
7 Coarse aggregate 10-4.75 mm(including seigniorage charges) cum 750.00
8 Coarse aggregate 20-10 mm(including seigniorage charges) cum 1025.00
The aggregate rates mentioned above (from sl.no.7 to sl.no10) are
inclusive of seigniorage charges of Rs.50/ cum, blasting charges of
Rs.70/cum and 25% machine crushing charges. However , if the
metal is obtained from hand broken , the blasting and crushing
charges shall be deducted. The aggregate shall be HB Stone of
Granite, Dolamite, Dolerite and Trap.( Quartzite and Basalt with
aggregate Impact of Less than 20)
11 Coir brush Each 22.00
12 Copper sheet 16 SWG kg 430.00
13 Coursed rubble stone 30 x 30 x 45 cm(including seigniorage charges) Each 13.00
14 Coursed rubble stone 30 x 30 x 60 cm(including seigniorage charges) Each 15.00
15 Curing Compound ltr 95.00
16 D - cord Rm 10.00
17 Delay - noiseless trunk Each 18.00
18 Detonating fuse coil Rm 7.00
19 Detonating shock tube / Cord relays Rm 50.00
20 Detonator delay type Each 17.00
21 Detonator electric Each 10.00
22 Detonator ordinary Each 5.00
23 Empty cement bag Each 3.00
24 Explosive ANFO kg 27.00
25 Explosive ANFO high strength booster kg 60.00
26 Explosive small dia ( Kelvex-220 or equivalent) kg 50.00
27 Fine aggregate / sand ( unscreened )(including seigniorage charges) cum 130.00
28 Fine aggregate / sand ( screened )(including seigniorage charges) cum 260.00
29 Geo-textile ( filter fabric ) 160 gsm sqm 75.00
233
S. Rate
2010-11
1 2 3 4
32 G I Pipe 100 mm dia B Class Rm 525.00
33 G I Pipe 15 mm dia A class Rm 75.00
34 G I pipe 25 mm dia A class Rm 110.00
35 G I pipe 40 mm dia B class Rm 180.00
36 G I pipe 50 mm dia A class Rm 220.00
37 G I Pipe 80 mm dia B Class Rm 280.00
38 G.I Bolts / Nuts and Washers kg 75.00
39 G.I sheet ( plain ) tonne 44,000.00
40 Hariyala turfing sods sqm 20.00
41 Hectometer stone one line dressed Each 165.00
42 Hemp yarn kg 55.00
43 Honne wood planks cum 42,000.00
44 Hume pipe with collar 150 mm dia Rm 210.00
45 Hume pipe with collar 300 mm dia Rm 420.00
46 J- Bolts 30 cm long Each 22.00
47 Jungle wood planks cum 16,000.00
48 Khandki stone 15 to 20 cm height Each 7.00
51 Kilometer stone one line dressed Each 315.00
52 LDPE sheet ( Geo membrane ) 500 micron thick sqm 63.00
55 M S Bolts / Nuts / Washers kg 50.00
56 Murum(including seigniorage charges and loading charges ) cum 72.50
57 Oxalic acid ltr 55.00
58 Oxygen gas cum 38.00
59 PVC sealing strip Rm 34.00
60 PVC water stopper 310 mm wide Rm 380.00
61 PVC pipe of 100 mm dia Rm 135.00
62 Reinforcement steel (including loading charges) (HYSD/TMT ) tonne 34,000.00
63 Resin bond Cement capsule Each 52.00
64 Rough stone 20 x 20 x 75 cm ( Including Seigniorage Charges) Each 11.00
Shahabad stone slab (including seigniorage charges and loading
65 sqm 170.00
charges)
Stone chips ( at dump yard / Spoil)(including seigniorage charges and
66 cum 160.00
loading charges)
Stone chips ( at quarry )(including seigniorage charges and loading
67 cum 286.00
charges)
Structural steel angle / channel / beam / bars (including loading
68 tonne 34,000.00
charges)
69 Structural steel plate / flats (including loading charges) tonne 40,000.00
70 Super Plasticizer ( Conplast RP-264 or equivalent ) kg 50.00
71 Synthetic Enamel paint 1st quality ltr 175.00
72 Synthetic adhesive ( Resin + Hardener ) Kg 180.00
73 Tar felt joint filler board 12 mm thick sqm 320.00
74 Tar felt joint filler board 20 mm thick sqm 520.00
Through stones 20 x 20 x 30 to 45 cm long(including seigniorage
75 Each 16.00
charges and loading charges)
234
S. Rate
2010-11
1 2 3 4
76 Each 27.00
77 Each 38.00
Un-coursed rubble stones ( at dump yard /Spoil )(including
78 cum 140.00
seigniorage charges and loading charges)
Un-coursed rubble stones ( at quarry )(including seigniorage charges
79 cum 230.00
and loading charges)
80 Water proofing compound kg 55.00
81 Welding electrodes 4 mm dia Each 9.00
82 Wire brush Each 30.00
83 Wire mesh 20 gauge sqm 160.00
84 Zinc chromate red oxide primer paint ltr 90.00
85 inorganic zinc silicate ltr 440.00
86 solvent less coal tar epoxy paint ltr 180.00
87 Zinc phosphate primer ltr 155.00
88 Allkyd based iron oxide paint ltr 120.00
89 cost of hdpe /light black MS casing pipe (150 mm Dia) Rm 525.00
90 welded steel wire fabric 100X100X5 mm size Kg 105.00
235
ADDITIONAL MATERIALS FOR GATES & HOISTS
GUIDE LINES :
a. For cast steel / Alloy steel / Forged steel / Bronze, aluminum alloy components the rates shall be inclusive of cost
of basic metal for these components, casting / forging charges, machining charges and applicable excise duty on
finished alloy component.
Basic Casting / Excise Total

metal / machining duty on rate /
or forging (1+2) (1+2+3)
kg / kg % Kg
1 2 3 4
Cast steel components :( Basic metal - steel ) 17.00 56.25 13.19 100
Wheel / Pulley / Hub / Plummer / Roller 17.00 64.69 14.7 95
Drum / Gear 17.00 73.13 16.22 105
Pinion
Forged steel components : ( Basic metal - structural steel
Hook / Shackle 24.00 84.38 19.51 130
Alloy steel components : ( Basic metal - alloy steel )
Shaft ( carbon steel ) 60.00 61.88 21.94 145
Pin ( stainless steel ) 80.00 67.5 26.55 175
Bronze, aluminum alloy components : ( Bronze alloy )
Bearing / Bush 175.00 146.25 57.83
b. The rate in the total rate column is rounded off to nearest Rs : 5.00.
c. For other materials the rates shall be prevailing market rates.
S. Rate
2010-11
1 2 3 4
1 Alloy steel ( IS : 1570-carbon steel ) shafts kg 145.00
2 Alloy steel ( IS : 1570-stainless steel ) pins kg 275.00
3 Bolt / Nut / Washer ( hot dipped galvanized ) kg 90.00
4 Bolt / Nut / Washer ( stainless steel ) kg 200.00
5 Bronze/Aluminum alloy(IS:305)bearings/bushes kg 550.00
6 Cast iron blocks kg 55.00
7 Cast steel drums / gears kg 110.00
8 Cast steel pinions kg 155.00
9 Cast steel wheels / pulleys / hubs / rollers / retainers kg 120.00
10 Chemical for de-greasing/ derusting/phosphate coating ltr 100.00
11 Coal tar epoxy paint ltr 130.00
12 Forged steel hooks / shackles kg 175.00
13 MS pipe 200 / 300 mm dia kg 120.00
14 MS pipe 32 mm dia Rm 130.00
15 MS pipe 25 mm dia Rm 115.00
16 Rubber bottom seal ( IS : 11855 ) Rm 530.00
Rubber side seal ( music note type Teflon claded ) (
17 Rm 1000.00
IS : 11855 )
236
S. Rate
2010-11
1 2 3 4
Rubber side seal ( music note type uncladed ) ( IS
18 Rm 850.00
: 11855 )
19 Rubber side seal Z-type ( IS : 11855 ) Rm 1800.00
Rubber corner seal ( Teflon claded ) ( IS :
20 Rm 2050.00
11855 )
21 Rubber corner seal ( un claded ) ( IS : 11855 ) Rm 1850.00
22 Stainless steel plates / flats kg 190.00
Welding electrode 4 mm dia x 450 mm ( radiographic low
23 Each 11.00
hydrogen )
24 Welding electrode 4 mm dia x 450 mm ( stainless steel ) Each 18.00
25 Wire rope 6x37 constn ( IS : 2266 ) kg 120.00
26 Zinc kg 120.00
27 Zinc rich ( zinc content : 90 % ) epoxy primer ltr 385.00
MATERIALS FOR POWER SUPPLY WORKS

S. Rate
Sl No. Description of Material Unit for
2010-11
1 Electric pole with fixtures Each 3,000.00
2 Flood light 500 W Each 250.00
3 Flood light set Each 1,800.00
4 Flouscent tube light 40 W Each 45.00
5 Flouscent tube light set Each 300.00
6 HT / LT Circuit breaker with accessories Set 198,000.00
7 HT / LT Line conductor 1000 m 14,500.00
8 PVC Armoured cable 10 sqmm and below Rm 165.00
9 PVC Armoured cable 16 sqmm Rm 245.00
237
DETAILS OF CAPITAL COST OF MACHINERY / EQUIPMENT
FOR THE YEAR: 2010-11
GUIDE LINES FOR FIXING CAPITAL COST OF MACHINERY / EQUIPMENT:
1 The Capital cost of machinery / equipment shall be for new machinery / equipment and shall be inclusive of
all taxes, duties, other levies.
2 The cost of transport vehicles / equipment shall be exclusive of cost of tyres and tubes.
3 The cost of drill rods / drill bits / air hose / water hose / road tax / insurance charges and other consumable
accessories shall not be included in the capital cost.
4 In cases, where the current capital cost of machinery / equipment could not be collected through enquiries,
the capital cost considered for previous year may be updated on the basis of average percentage increase / decrease
in the index for machinery published in the R.B.I Bulletin.
S. Rate
Sl
DESCRIPTION OF MACHINERY / EQUIPMENT UNIT for
No:
2010-11
1 2 3 4
1 Agitator car / Transit mixer 2 cum ( excluding tyres ) Each 1,700,000
tyres and tubes 6 sets 63,000
2 Air compressor 5 cmm electric Each 440,000
3 Air compressor 7 cmm diesel Each 650,000
5 Air compressor 8.5 cmm diesel Each 750,000
6 Air compressor 8.5 cmm electric Each 714,000
8 Angle Dozer 90 hp Each 3,800,000
9 Batching plant 0.5 cum with accessories Each 950,000
10 Batching plant 2 x 1.00 cum with accessories Each 2,500,000
11 Batching plant 2 x 1.50 cum with accessories Each 3,200,000
12 Bending machine Each 180,000
13 Clamp shell and hoisting ropes Each 21,000
14 Concrete bucket 1.5 cum Each 42,000
15 Concrete hand mixer 45/30 ltr Each 10,500
16 Concrete mixer 300/200 ltr(diesel) Each 115,000
17 Concrete mixer 300/200 ltr ( electric ) Each 105,000
18 Concrete mixer 600/400 ltr(diesel) Each 195,000
19 Concrete mixer 600/400 ltr ( electric ) Each 160,000
20 Concrete paver 100 Sqm / hr Each 1,700,000
21 Convey mucker ( excluding tyres ) Each 2,900,000
22 Core drilling machine Each 800,000
23 Diesel generating set 30 KVA Each 340,000
24 Diesel generating set 50 KVA Each 450,000
25 Diesel Loco 45 hp Each 1,250,000
26 Dewatering pump 5 hp diesel Each 30,000
27 Dewatering pump 5 hp electric Each 15,750
32 Drifter Each 658,000
33 Drilling jumbo ( excluding tyres ) Each 960,000
34 Dumper 4.5 cum ( excluding tyres ) Each 882,000
238
S. Rate
Sl
DESCRIPTION OF MACHINERY / EQUIPMENT UNIT for
No:
2010-11
1 2 3 4
35 Geophysical Ele.resistivity meter Each 288,000
36 Grouting pump Each 73,000
37 Guniting / sand blasting equipment Each 198,000
38 Ice plant with accessories 30 t / day Each 1,732,000
39 Jack hammer Each 40,000
40 Needle vibrator 40 mm petrol Each 14,000
41 Needle vibrator 40 mm electric Each 16,000
42 Needle vibrator 60 mm petrol Each 14,700
43 Needle vibrator 60 mm electric Each 18,900
44 Planing machine 4 m stroke Each 553,000
45 Plate shearing machine up to 12 mm Each 295,000
46 Pneumatic placer 0.5 cum Each 420,000
47 Pneumatic tamper Each 50,900
48 Pug cutting machine Each 13,600
49 Pusher leg Each 31,500
50 Road roller diesel 10 t Each 630,000
51 Shovel 0.50 cum 75 hp Each 2,400,000
52 Shovel 0.85 cum 110 hp Each 4,090,000
53 Stationery derrick crane 5 t Each 470,000
54 Tipper 5 cum ( excluding tyres ) Each 1,195,000
55 Tipping tub 1.5 cum Each 115,000
56 Tower crane 5 tonne Each 5,700,000
57 Transformer 250 KVA Each 300,000
58 Truck 10 t ( excluding tyres ) Each 880,000
59 Truck mounted derrick crane 5 t ( excluding tyres ) Each 1,500,000
60 Upright drilling machine Each 42,000
61 Ventilation fan 20 hp Each 131,000
62 Vibratory pad foot roller 8 t Each 1,890,000
63 Wagon drill Each 470,000
64 Water tanker 8000 ltr (excluding tyres) Each 880,000
65 Welding set Each 36,500
66 Winch 35 hp electric Each 268,000
239
ACCESSORIES TO MACHINERY / EQUIPMENT FOR THE YEAR : 2010-11
Sl No. DESCRIPTION OF MATERIAL UNIT S Rate for 2010-11

1 2 3 4
1 Casing shoe bit Each 7,800
2 Diamond core bit BX size Each 9,400
3 Diamond core bit NX size Each 14,500
4 Double tube core barrel Each 10,500
5 Extension drill rod with coupling sleeve Rm 1,550
6 Jack hammer drill rod 1.5 m Each 3,100
7 Jack hammer drill rod 2.5 m Each 5,200
8 Nozzle for Guniting / sand blasting gun Each 525
9 Paving Cylinder Each 21,000
10 Rails 30R ( 30 kg / m ) tonne 34,500
11 Reamer shell Each 3,600
12 T.C.Cross bit 50 mm dia Each 4,700
15 Tyres and Tubes for truck Set 13,100
16 Wire rope 16 mm dia Rm 155
17 Excavation of drain with Excavator cum 21
AGGREGATE CRUSHING & PROCESSING PLANT
S Rate
2010-11
1 2 3 4
1 Jaw crusher 900 x 500 mm ( 120 tph ) with 50 hp motor Each 1,470,000
2 Jaw crusher 500 x 300 mm ( 60 tph ) with 30 hp motor Each 840,000
3 Jaw crusher 400 x 225 mm ( 10 tph ) with 25 hp motor Each 420,000
4 Jaw plates 900 x 500 mm ( serreted ) Set 105,000
7 Nylon Conveyor belt 3 ply 600 mm width Rm 1,575
8 Nylon Conveyor belt 3 ply 1000 mm width Rm 2,600
OTHER COSTS ON MATERIAL / MACHINERY / EQUIPMENT FOR THE YEAR : 2010-11
1 The rate provided for ' SUNDRIES' (Lump sum provision for unquantified inputs in the data rates)
shall be updated on the basis of general percentage increase / decrease in the market rates or on the
basis of R.B.I ' All Commodity' index.
2 The rate for structural steel fabrication shall include cost of all materials (except structural steel),
machinery, labour and one coat of primer painting.
3 Demand charges and electric power charges shall be as per prevailing APCPDCL tariff.
4 Rate of interest on capital cost shall be as approved by Govt or other competent authority.
240
S Rate
Sl No. DESCRIPTION OF MATERIAL UNIT
for 2010-11
1 2 3 4
1 Air hose 25 mm dia Rm 115.00
2 Air hose 50 mm dia Rm 220.00
3 Demand charges ( HT-2B ) on power supply KVA / month 195.00
4 Diesel ltr 38.50
5 Electric power ( HT-2B category ) including tax Kwhr 4.30
6 Excise duty on Gates / Hoist supplies % 0.0%
7 Insurance charges on machinery % / annum 1.00%
8 Interest on capital cost % / annum 12.00%
9 Lubricants ltr 190.00
10 Petrol ltr 53.00
11 Rivets kg 75.00
12 Road tax on transport vehicles Rs./annum 13,000.00
13 Shalimastic sealing compound kg 65.00
14 Shutter oil ltr 50.00
15 Structural steel fabrication kg 15.00
16 Sundries ( Lump sum for un quantified inputs ) LS 30.00
17 Water hose ( pressure ) 20 mm dia Rm 165.00
18 Steel wedges LS 11.00
19 Elbows / Nipple / Plugs etc., LS 12.00
20 Soldering materials LS 11.00
21 Steam circulation arrangement LS 11.00
22 Fuel charges ( gas for heating ) LS 11.00
23 Vulcanizing materials LS 11.00
24 Other accessories / controls / junctions LS 11.00
25 Miscellaneous fittings / switches etc LS 11.00
26 Anchors / supports for cables / lights LS 11.00
27 Civil works for foundations / pedestals / duct etc LS 11.00
28 Gas cutting set ( 2 No’s 15 m hose and nozzle unit ) EACH 10,000.00
29 Grease Kg 145.00
30 Welding holder set ( cable / holder / gloves / mask etc ) EACH 4,600.00
31 Use rate of ropes LS 110.00
MATERIALS FOR GATES AND HOISTS
Sl S Rate for
DESCRIPTION OF MATERIAL UNIT
No. 2010-11
1 Worm reducers EACH 157,500
2 Electric motor 20 hp(Double Shaft) EACH 84,000
3 Electric motor 17.5 hp(Double Shaft) EACH 58,000
4 Electric motor 12.5 hp(Double Shaft) EACH 46,500
5 Electric motor 5 hp(Double Shaft) EACH 25,500
6 Electric motor 3 hp (Double Shaft) EACH 17,500
7 Electric motor 2 hp (Double Shaft) EACH 9,000
8 Floating shaft 300 mm dia Kg 135
9 Manual operating system EACH 21,000
10 Gate position indicator EACH 120,000
11 Ele-magnetic brake EACH 23,000
12 Electric cable / switch / control panel etc LS 27,500
13 Wire rope sockets EACH 2,750
241
Other "Over Heads" to be added in the Basic Data wherever applicable for Irrigation Work Items for the year 2010-11
Sl.No Description % Category of works

Add for Contractors' Overheads and profit including Labour
1 14% General
importation
2 VAT @ 4% General
3 Add for blasting studies & monitoring vibrations etc @ 0.50% Canals & Allied Works
4 Add for shifting & re-erection of BP @ 2% Canals & Allied Works
5 Add for LH / RH shifting & erection of Paver @ 0.50% Canals & Allied Works
6 Add for ledge cutting / erection of tracks etc @ 1% Canals & Allied Works
7 Apportioned hire charges of machinery @ for lining slab 90% Canals & Allied Works
8 Apportioned cost of labour @ for lining slabs 90% Canals & Allied Works
9 Apportioned hire charges of machinery @ for lug slabs 10% Canals & Allied Works
10 Apportioned cost of labour @ for lug slabs 10% Canals & Allied Works
11 Add for repairs/ replacements/ catwalks etc., @ 15% Dam & Allied Works
12 Add for binding wire/ temporary supports etc., @ 5% Dam & Allied Works
13 Add for scaffolding @ 2.5% Tunnel & Allied Works
14 Add for labour for scaffolding @ 2.5% Tunnel & Allied Works
15 Add for scaffolding materials @ 2.50% Tunnel & Allied Works
16 Deduct salvage value on machinery @ 10% Hire Charges
17 Add for excise duty on 75% cost excluding cost of materials @ 0.0% Gates & Allied Works
18 Add for transportation up to work site @ 3% Gates & Allied Works
19 Add for Air and Water line @ 1% Tunnel & Allied Works
20 Add for Ventilation @ 4.50% Tunnel & Allied Works
21 Add for Lighting @ 1.60% Tunnel & Allied Works
22 Add for Ele sub-station / Demand charges @ 2.5% Tunnel & Allied Works
23 Add for conveyor system @ 3% Dam & Allied Works
24 Add for trestle bridge for tower crane truck @ 4% Dam & Allied Works
242
Other Dept’s Basic Data
Materials other than covered under irrigation
For the year 2010-11
GENERAL GUIDE LINES FOR REVISING RATES OF MATERIALS:
1 Average of the prevailing market rates, ignoring freak rates, is the criteria for
Fixing market rates for materials.
2 The rates for materials is inclusive of all taxes, duties and other local levies.
3 The rates for materials is inclusive of Seigniorage charges wherever applicable.
4 The rates for materials, except those for which lead charges are admissible as per the Statement of lead
charges is for all leads.
S. Rate
Sl. No. Description Unit for
2010-11
1 2 3 4
Quarried stone 150 - 200 mm size for Hand Broken (Excluding
M-002 cum 130
lead charges)
M-003 Boulder with minimum size of 300 mm for Pitching cum 145
M-004 Coarse Sand for filling(Including seigniorage charges) cum 110
M-005 Coarse sand for Mortar (Including Seigniorage Charges) cum 130
Rate as per item
no.28 , material
M-006 Fine sand (including seigniorage charges) cum
rates of
Irrigation
Rate as per item
no.56 , material
M-007 Moorum (including seigniorage charges) cum
rates of
Irrigation
M-008 Gravel/Quarry spall Cum 72.5
M-009 Granular Material or hard murrum for GSB works Cum Deleted
Rate as per item
no.56 of material
M-010 Granular Material or hard murrum for GSB works Cum
rates of
Irrigation
M-011 Fly ash conforming to IS: 3812 ( Part II & I) Cum 42
For item No.M-012 to M-029 the note shall be as follows
1) The rates mentioned are inclusive of Seigniorage charges of
Rs.50/ cum, blasting charges of Rs.70/cum and 25% machine
crushing charges. However, if the metal is obtained by hand
broken, machine crushing charges shall be deducted.
2)If the material is obtained by hand broken from surface
boulders/canal spoil ,the blasting and crushing charges shall be
deducted.
3)The material shall be HB Stone of Granite, Dolamite, Dolerite
and Trap.(Quartzite and Basalt with aggregate impact of less
than 20)
Filter media/Filter Material as per Table 300-3 (MoRT&H
M-012 Cum 305
Specification)
M-013 Close graded Granular sub-base Material 53 mm to 9.5 mm cum 605
M-014 Close graded Granular sub-base Material 37.5 mm to 9.5 mm cum 625
243
S. Rate
2010-11
1 2 3 4
M-018 Close graded Granular sub-base Material 4.75mm to 2.36 mm cum 475
Close graded Granular sub-base Material 4.75mm to 75 micron
M-019 cum 455
mm
M-020 Close graded Granular sub-base Material 2.36 mm cum 455
Stone crusher dust finer than 3mm with not more than 10%
M-021 cum 255
passing 0.075 sieve.
M-022 Coarse graded Granular sub-base Material 2.36 mm & below cum 415
Coarse graded Granular sub-base Material 4.75mm to 75
M-023 cum 445
micron mm
M-024 Coarse graded Granular sub-base Material 4.75 mm to 2.36 mm cum 445
M-029 Coarse graded Granular sub-base Material 53 mm to 26 .5mm cum 765
For item No.M-030 & M-055 the note shall be as follows
1) The rates mentioned are inclusive of Seigniorage charges of
Rs.50/ cum, blasting charges of Rs.70/cum and 25% machine
crushing charges. However, if the metal is obtained by hand
broken, machine crushing charges shall be deducted.
2) If the material is obtained by hand broken from surface
boulders/canal spoil, the blasting and crushing charges shall be
deducted.
3)The material shall be HB Stone of Granite, Dolamite, Dolerite
and Trap.(Quartzite and Basalt with aggregate impact of less
than 20)
M-030 Aggregates below 5.6 mm cum 505
M-031 Aggregates 22.4 mm to 2.36 mm cum 805
M-033 Aggregates 45 mm to 2.8 mm cum 630
M-038 Aggregates 63 mm to 45 mm cum 595
M-044 Aggregates 13.2 mm to 10 mm cum 895
M-050 Aggregates 6 mm nominal size cum 655
244
S. Rate
2010-11
1 2 3 4
M-052 Aggregates 13.2/12.5 mm nominal size cum 980
Rate as per PH
M-056 AC pipe 100 mm dia metre
item
M-057 Acrylic polymer bonding coat litre 370
M-058 Aluminum Paint litre 270
M-059 Aluminum alloy plate 2mm Thick sqm 275
M-060 Aluminum alloy/Galvanised steel tonne 50000
Aluminum sheeting fixed with encapsulated lens type reflective
M-061 sheeting including 2% towards lettering, cost of angle iron, cost sqm 740
of drilling holes, nuts, bolts etc. and signs as applicable
As per local
M-062 Aluminum studs 100 x 100 mm fitted with lens reflectors No’s
market rate
M-063 Barbed wire kg 60
M-064 Bearing (Cost of parts) No’s 450
M-065 Bearing (Cast steel rocker bearing assembly of 250 tonne ) No’s 630
Bearing (Elastomeric bearing assembly consisting of 7 internal
3
M-066 layers of elastomer bonded to 6 nos. internal reinforcing steel Cm 0.5
laminates by the process of vulcanisation,)
M-067 Bearing (Forged steel roller bearing of 250 tonne) No’s
Bearing (Pot type bearing assembly consisting of a metal piston
supported by a disc, PTFE pads providing sliding surfaces against
As per Market
M-068 stainless steel mating together with cast steel No’s
Competitive
assemblies/fabricated structural steel assemblies duly painted
rates.
with all components
M-069 Bearing (PTFE sliding plate bearing assembly of 80 tonnes ) No’s
M-070 Bearing (Supply of sliding plate bearing of 80 tonne) No’s
M-071 Bentonite kg 5.5
Rate as per item
no.3 , material
M-072 Binding wire kg
rates of
Irrigation
As per rates fixed
by R&B Dept
M-073 Bitumen ( Cationic Emulsion ) tonne
based on
refinery rates
M-074 Bitumen (60-70 grade)(Excluding taxes) tonne
As per rates fixed
Bitumen (80-100 grade ) (Excluding taxes)
M-075 tonne by R&B Dept
based on
M-076 Bitumen (Cutback ) tonne
refinery rates
M-077 Bitumen (emulsion)(Excluding taxes) tonne
M-078 Bitumen (modified graded) tonne
As per Building
M-079 Brick each
SOR
M-080 C.I. shoes for the pile kg 42
245
S. Rate
2010-11
1 2 3 4
Rate as per item
no.5 , material
M-081 Cement tonne
rates of
Irrigation
Rate as per item
no.62 , material
M-082 Cold twisted bars (HYSD/TMT Bars) tonne
rates of
Irrigation
M-083 Collar for joints 300 mm dia No’s 125
M-084 Compressible Fibre Board(20mm thick) sqm 420
M-085 Connectors/ Staples each 63
M-086 Copper Plate(12m long x 250mmwide) kg 390
M-087 Corrosion resistant Structural steel tonne 44000
M-088 Corrugated sheet, 3 mm thick, "Tie" beam section railing kg 150
M-089 Credit for excavated rock found suitable for use cum 110
Rate as per item
no.15 , material
M-090 Curing compound liter
rates of
Irrigation
As per local
Delineators from ISI certified firm as per the standard drawing
M-091 each competitive
given in IRC - 79
quotations
Earth Cost or compensation for earth taken from private land
M-092 cum 25
(Excluding seigniorage charges) (Vide ENC/IW-Correction slip-1)
Elastomeric slab seal expansion joint assembly manufactured by As per local
M-093 using chloroprene, elastomer for elastomeric slab unit metre competitive
conforming to clause 915.1 of IRC: 83 (part II), quotations
Electric Detonators @ 1 detonator for 1/2 gelatin stick of 125
M-094 100 no’s 1050
gms each
M-095 Epoxy compound with accessories for preparing epoxy mortar kg 275
M-096 Epoxy mortar kg 85
M-097 Epoxy primer kg 480
M-098 Epoxy resin-hardner mix for prime coat kg 500
M-099 Flag of red color cloth 600 x 600 mm each 21
M-100 Flowering Plants each 27
M-101 Galvanised MS flat clamp No’s 160
Galvanised steel wire crates of mesh size 100 mm x 100 mm
M-102 sqm 135
woven with 4mm dia. GI wire in rolls of required size.
Galvanised structural steel plate 200 mm wide, 6 mm thick, 24
M-103 kg 735
m long
M-104 Gelatin 80% kg 525
As per local
M-105 Geo grids sqm competitive
quotations
Rate covered
from sl.no.52 to
M-106 Geo membrane sqm
54 of material
items of
246
S. Rate
2010-11
1 2 3 4
Irrigation
As per local
M-107 Geo nets sqm competitive
quotations
Rate covered
from sl.no.29 to
M-108 Geo textile sqm 31 of material
items of
Irrigation
As per local
M-109 Geo textile filter fabric sqm competitive
quotations
M-110 GI bolt 10 mm Dia No’s 18
Rate covered in
hire charges of
M-111 Grouting pump with agitator hour
machinery of
Irrigation items
M-112 Grass (Doob) kg 3.30
M-113 Grass (Fine) kg 4.5
M-114 HDPE pipes 75mm dia metre Rate as per PH
M-115 HDPE pipes 90mm dia metre items
M-116 Hedge plants each
M-117 Helical pipes 600mm diameter metre
Rate as per local
M-118 Hot applied thermoplastic compound litre
competitive
M-119 HTS strand tonne
quotations
Joint Sealant Compound
M-120 kg
Jute netting, open weave, 2.5 cm square opening for seeding
M-121 and Mulching sqm 70
M-122 LDO for steam curing litre 50

M-123 M.S. Clamps kg Deleted
Rate as per local
M-124 M.S. Clamps kg competitive
quotations
Rate as per local
M.S. shoes @ 35 Kg per pile of 15 m
M-125 kg competitive
quotations
M-126 Mild Steel bars tonne 33000
Modular strip/box seal expansion joint including anchorage
catering to a horizontal movement beyond 70 mm and up to
140mm assembly comprising of edge beams, central beam,2
Rate as per local
modules chloroprene seal, anchorage elements, support and
M-127 metre competitive
control system, all steel sections protected against corrosion
quotations
and installed by the manufacturer or his authorised
representative
M-128 Modular strip/box seal expansion joint catering to a horizontal metre Rate as per local
247
S. Rate
2010-11
1 2 3 4
movement beyond 140mm and up to 210mm box/box seal joint competitive
assembly containing 3 modules/cells and comprising of edge quotations
beams, two central beams, chloroprene seal, anchorage
elements, support and control system, all steel sections
protected against corrosion and installed by the manufacturer
or his authorised representative
M-129 Nipples 12mm No’s 13
M-130 Nuts and bolts kg 65
As per building
M-131 Paint litre
SOR
M-132 Pavement Marking Paint litre
M-133 Paving Fabric Sqm Rate as per local
Perforated geo synthetic pipe 150 mm dia competitive
M-134 metre
quotations
M-135 Perforated pipe of cement concrete, internal dia 100 mm metre
Rate as per local
Pesticide
quotations
Rate as per PH
M-137 R.C.C Pipes 200 mm dia, 2.5 m long for drainage metre
item
M-138 Plastic sheath, 1.25 mm thick for dowel bars Sqm
M-139 Plastic tubes 50 cm dia, 1.2 m high No’s Rate as per local
M-140 Polymer braids metre competitive
M-141 Pre moulded Joint filler,25 mm thick for expansion joint. Sqm quotations
M-142 Pre-coated stone chips of 13.2 mm nominal size cum
Preformed continuous chloroprene elastomer or closed cell
foam sealing element with high tear strength, vulcanised in a Rate as per local
M-143 metre
single operation for the full length of a joint to ensure water competitive
tightness. quotations
M-144 Pre-moulded asphalt filler board Sqm
Rate as per local
Pre-packed cement based polymer concrete of strength 45 Mpa
at 28 days
quotations
As per building
M-146 Primer kg
SOR
As per local
M-147 Quick setting compound kg
market rate
M-148 Random Rubble Stone cum 205
M-149 RCC Pipe NP 4 heavy duty non pressure pipe 1000 mm dia metre
Rate as per PH
items
M-152 Reflectorising glass beads kg
Reinforcement strips 60 mm wide 5 mm thick as per clause
M-153 metre
3102. (Copper Strips) Rate as per local
Reinforcement strips 60 mm wide 5 mm thick as per clause competitive
M-154 metre
3102. (Galvanised carbon steel strips) quotations
M-155 metre
3102. (Glass reinforced polymer/ fiber reinforced
248
S. Rate
2010-11
1 2 3 4
polymer/polymeric strips)
M-156 metre
3102. (Stainless steel strips)
M-157 metre
3102. Aluminum strips)
M-158 Rivets each 3.5
M-159 Sand bags (Cost of sand and Empty cement bag) No’s 14
Rate as per local
M-160 Sapling 2 m high 25 mm dia each competitive
quotations
M-161 Scrap tyres of size 900 x 20 No’s 55
M-162 Seeds(Grass) kg 13
M-163 Selected earth cum 65
Separation Membrane of impermeable plastic sheeting 125 Rate as per local
M-164 sqm
micron thick competitive
M-165 Sheathing duct metre quotations
M-166 Shrubs each 11
Rate as per local
Sludge / Farm yard manure @ 0.18 cum per 100 sqm at site of
M-167 cum competitive
work for turfing
quotations
As per building
M-168 Sodium vapour lamp each
SOR
M-169 Square Rubble Coursed Stone cum 1680
Steel circular hollow pole of standard specification for street Rate to be
M-170 each
lighting to mount light at 5 m height above deck level obtained from
Electricity/
Steel circular hollow pole of standard specification for street
M-171 each Municipal
lighting to mount light at 9 m height above road level
Departments
M-172 Steel drum 300 mm dia 1.2 m high/empty bitumen drum No’s As per local
Steel helmet and cushion block on top of pile head during competitive
M-173 kg
driving. market rate
M-174 Steel pipe 25 mm external dia as per IS:1239 metre 210
M-175 Steel pipe 50 mm external dia as per IS:1239 metre 420
M-176 Steel wire rope 20 mm kg 135
M-177 Steel wire rope 40 mm kg 155
Rate as per local
M-178 Strip seal expansion join metre competitive
quotations
M-179 Structural Steel(HYSD/TMT bars) tonne 34000
Rate as per item
no.70 , material
M-180 Super plasticizer admixture IS marked as per 9103-1999 kg
rates of
Irrigation
Rate as per local
Synthetic Geo grids as per clause 3102.8 and approved design
M-181 sqm competitive
and specifications.
quotations
Rate covered
M-182 Through and bond stone each
from sl.no.75 to
249
S. Rate
2010-11
1 2 3 4
77 of material
items of
Irrigation
M-183 Tie rods 20mm diameter No’s 35
M-184 Tiles size 300 x 300 mm and 25 mm thick each As per Building
M-185 Timber cum SOR
M-186 Traffic cones with 150 mm reflective sleeve No’s Rate as per local
Tube anchorage set complete with bearing plate, permanent competitive
M-187 No’s
edges etc quotations
M-188 Un slaked lime tonne 1900
M-189 Water KiloLitre 70
As per building
M-190 Water based cement paint litre
SOR
M-191 Welded steel wire fabric kg 110
M-192 Wire mesh 50mm x 50mm size of 3mm wire kg 185
M-193 Wooden ballies 2" Dia for bracing each As per Building
M-194 Wooden ballies 8" Dia and 9 m long each SOR
M-195 Wooden packing cum 950
M-196 Wooden staff for fastening of flag 25 mm dia, one m long each 55
per cm height per
Item 8.3 Printing new letter and figures of any shade (ii) English Roman 1.10
letter
Item 8.8 Painting Two Coats on New Concrete Surfaces sqm As per Building
Item 8.9 Painting angle iron post two coats sqm SOR
New Items
1 Benching old embankment slopes 0.45 X 0.45 M RM 2.40
Filling sand bags and laying in position at work site, complete
2 per bag 17.10
including CP & OH charges
Rough stone for revetment 225mm thick (including seigniorage
3 Cum 121.00
charges)
250
Building Items
BUILDING ITEMS
(The Schedule of Rates will be finalised by the Committee constituted vide
G.O.Rt.No.471 TR&B(R1) Dept Dt.20-4-2007)
251
Public Health Items
PUBLIC HEALTH ITEMS
252
Public Health Items
PUBLIC HEALTH ITEMS
S of Rate for
Sl. No. Description Unit
2010-2011
1 2 3 4
1 RATES OF LABOUR (SKILLED WORKMEN)
1. Caulker Per Day
2. Plumber 1st Class Per Day
3. Plumber 2nd Class Per Day
4. Sewer Cleaner Per Day
5. Well Sinker Per Day As per Labour
6. Pipe line Fitter 1st Class Per Day rates of SOR
7. Pipe line Fitter 2nd Class Per Day
8. Pump Driver Per Day
9. Bore Mechanic Per Day
10. Light Vehicle Driver Per Day
Note: The rate at relevant item in common SOR is applicable for
occasional employment.
2 RATES FOR EARTH WORK :
a. Earth work excavation in all soils for pipe lines, for drainage and
To follow the
water supply, where the depth is more than 1.5 times the width.
relevant items of
b. Earth work excavation in all soils for pipe lines, for drainage and
Irrigation work
water supply, where the depth is less than 1.5 times the width.
items as per AP.
c. Earth work excavation in all soils for open trenches, for valve pits,
Standard data
inspection chambers, etc.
3. a. Excavation of pipe line trenches for drainage and water supply in rock
requiring blasting with initial lead and lift including cost of blasting
materials where the depth is more than 1.5 times the width, in
places where there is no habitation.
b. Excavation of pipe line trenches for drainage and water supply in rock
requiring blasting with initial lead and lift including cost of blasting
To follow the
materials where the depth is less than 1.5 times the width, in places
relevant items of
where there is no habitation.
Irrigation work
c. Cutting rock for pipe line trenches by hammers, nuckles and chisels
items as per AP.
including stacking where the depth is 1.5 times or more than the
Standard data
width.
d. Cutting rock for pipe line trenches by hammers, nuckles and chisels
including stacking where the depth is less than 1.5 times the width.
e. Cutting rock for works other than pipe lines trenches by hammers,
nuckles and chisels including stacking.
f. For controlled blasting at restricted places
NOTE :- Rock should be measured in solids. In case it is not possible,
stacks should be made in which case 40% for voids to be deducted
from the stack measurements.
4 Loading or unloading materials such as C.I. Pipes, PVC Pipes, AC
Pressure Pipes, DI Pipes, SW Pipes, PVC Pipes, A.C/Specials less than
300 mm dia up to 4 m in length including stacking.
a. C.I. Pipes/D.I. Pipes and fittings Per Tonne
b. A.C. Pipes & Specials Per Tonne To follow as per
c. Stoneware pipes & Specials Per Tonne AP. Standard data
d. P.V.C. Pipes and fittings Per Tonne
5 Loading or unloading materials such as C.I. Pipes, DI pipes, SW pipes,
AC pressure pipes & fittings/ specials from 300 mm to 600 mm dia up
to 4 m in length including stacking.
a. C.I. Pipes/D.I. Pipes and fittings Per Tonne To follow as per
b. A.C. Pipes & Specials Per Tonne AP. Standard data
253
Public Health Items
S of Rate for
2010-2011
1 2 3 4
c. Stoneware pipes & Specials Per Tonne
6 Loading or unloading materials such as C.I. Pipes, DI pipes, PVC pipes,
AC pipes less than 300 mm dia, above 4 m in length including
stacking.
a. C.I. Pipes/D.I. Pipes and fittings Per Tonne
To follow as per
b. A.C. Pipes & Specials Per Tonne
AP. Standard data
c. P.V.C. Pipes and fittings Per Tonne
7 Loading or unloading materials such as C.I. Pipes, DI pipes, AC pipes
from 300 mm to 600 mm above 4 m in length including stacking.
a. C.I. Pipes/D.I. Pipes and fittings Per Tonne To follow as per
b. A.C. Pipes & Specials Per Tonne AP. Standard data
Note:- For loading and unloading the above materials at Railway
Stations, the rates may be adopted based on the competitive
quotations or the hammalae charges if prevailing.
8. a. Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with s/s
ends carefully into trenches and laying them true to alignment and
gradient including all sundries but excluding cost and conveyance of
pipes from source of supply (Ref to specifications. BIS No.3114/1994)
DIAMETER OF PIPE/Fittings in mm : To follow as per
80mm to 1000mm dia Per Metre AP. Standard data
8. b. Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with
flanged ends carefully into trench and laying them true to alignment
and gradient including all sundries but excluding cost and conveyance
of pipes from source of supply. (Reference to specifications. BIS
No.3114/1994)
80mm to 750mm dia AP. Standard data
800 Per Metre 361.00
1000 Per Metre 610.00
9. a. Jointing CI /DI pipes & fittings with s/s ends including cost of pig lead,
hemp yarn and sundries such as cost of fuel for melting lead, filling
with water with lead up to 500m and testing to required pressure
complete. (Reference to specifications. BIS No.3114/94/12288:1997)
80mm to 800mm AP. Standard data
900 Each Joint 10384.00
1000 Each Joint 11600.00
9. b. Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint),
excluding the cost of the gasket but including all sundries filling with
water, with a water lead up to 500m and testing to required
pressure, etc. complete (Reference to specifications IS
3114/1994/12888/1997)
80mm to 1000mm dia Each Joint AP. Standard data
10 Jointing CI pipes, fittings and valves with flanged ends including cost
of jointing materials such as bolts, rubber insertion, white lead
including filling with water, with lead up to 500 meters and testing to
required pressure complete. (Reference to specifications. BIS
No.3114/1994.)
DIAMETER OF PIPE/Fittings/ valve in mm : To follow as per
80mm to 750mm dia Each Joint AP. Standard data
800 Each Joint 4312.00
254
Public Health Items
S of Rate for
2010-2011
1 2 3 4
900 Each Joint 5071.00
1000 Each Joint 5841.00
11a Lowering the RCC plain ended pipes carefully into the trench laying
them true to alignment and gradient, jointing RCC pipes with cement
joints including curing, the cost of jointing materials i.e., Cement
Mortar (1:1.5), hemp yarn etc., and testing including filling with
water with a water lead up to 500 metres excluding cost of rubber
rings as per BIS No.783/85.
per every 25 mm dia. Per Metre 12.00
11b Lowering the RCC S/S pipes carefully into the trenches laying them
true to alignment and gradient, jointing with rubber rings and testing
including filling with water with a water lead up to 500 meters
including cost of rubber rings as per BIS No. 783/1985
per every 25 mm dia. Per Metre To follow as per
80mm to 600mm AP. Standard data
700 199.00
800 239.00
900 286.00
1000 343.00
12 Lowering and Jointing G.I. pipes and specials / fittings including
excavation of trench of 0.5m width and 0.50 m depth in all soils
except rock requiring blasting and refilling trenches after laying and
jointing pipes and also including cost of jointing materials but
excluding the cost of pipes. Reference to specifications. BIS
No.783/85
a G.I. PIPES :
DIA in mm To follow as per
15mm to 150mm Per Metre AP. Standard data
b Laying, jointing of PVC/HDPE pipes as per BIS No.7634 part-III/75 for
PVC and BIS No.7634 part-II/75 for HDPE pipes.
DIA in mm
50 Per Metre 19.00
40 Per Metre 19.00
32 Per Metre 19.00
25 Per Metre 17.00
20 Per Metre 16.00
NOTE :- (i) The above rates are applicable for the works in District
only.
(ii) If the depth of excavation is more than 0.5 m separate rates to be
worked out.
13 Lowering and laying in ready made trench true to alignment and
gradient, jointing, and testing of Stone ware pipes including cost of
jointing material such as cement mortar (1:1) proportion and hemp
yarn but excluding cost and conveyance of pipe. (Reference to
specifications BIS No. 6530/72)
DIA of Pipes in mm . To follow as per
14 Lowering, laying, jointing and testing to hydraulic test pressure
including cost of water with minimum water lead of 500m for UPVC
pressure pipes in ready made trenches true to alignment and
gradient including all sundries but excluding cost & conveyance of
pipes from source of supply and jointing materials as per BIS No.
7634 - Part III - 1975
255
Public Health Items
S of Rate for
2010-2011
1 2 3 4
DIA of Pipes in mm . To follow as per
15 Laying and jointing of HDPE pipes by butt fusion welding as per
IS:7634 – part-II/1975 as amended from time to time to the
alignment and gradient and testing the pipeline to the required
pressure.
Outer Dia of pipes in MM
63 Per Metre 24.00
75 Per Metre 26.00
90 Per Metre 30.00
110 Per Metre 34.00
125 Per Metre 41.00
140 Per Metre 44.00
160 Per Metre 47.00
180 Per Metre 52.00
200 Per Metre 56.00
225 Per Metre 62.00
250 Per Metre 66.00
280 Per Metre 73.00
NOTE:- For item 9 to 16 the element of testing charges is to be
considered as 20% of the combined rate for laying, jointing and
testing. This 20% shall be released only after satisfactory testing of
the pipe line to the required pressure.
16 Lowering, keeping in position and fixing C.I. sluice valves (with cap /
with hand wheel & Reflex valves) excluding cost of bolts, nuts, rubber
insertion, sluice valve and tail pieces
Dia of Valve in mm. To follow as per
80mm to 450mm Each AP. Standard data
17 Labour charges for fixing Air valves including boring the mains and
threading the bore fixing nipple etc., complete.
Dia of Air valve in mm.
25 Each To follow as per
40 Each AP. Standard data
50 Each 108.00
65 Each 114.00
80 Each 125.00
100 Each 147.00
125 Each 229.00
150 Each 250.00
18 Labour charges for fixing Kinetic Air Valves with isolating Sluice
valves, Double Air valves/ Air Cushion valve excluding cost of jointing
materials such as bolts, nuts and rubber insertions etc., complete.
Dia of Air valve in mm.
25 Each 88.00
40 Each 101.00
50(Double Air valves) Each 107.00
65 Each 114.00
80 Each 125.00
100 Each 146.00
256
Public Health Items
S of Rate for
2010-2011
1 2 3 4
125 Each 228.00
150 Each 249.00
19 Providing and fixing spindle fire hydrant with 65 mm outlet.
Complete with bolts, nuts, and rubber insertion etc. complete but
excluding cost of Materials.
To follow as per
65 mm Each
AP. Standard data
80 mm Each 125.00
20 Uprooting C.I./ DI Pipes by melting the lead, loosening the joints,
scraping the pipes, hoisting and keeping within a lead of 10 m but
excluding earth work excavation and refilling.
To follow as per
80mm to 600mm Per Metre
AP. Standard data
21 Uprooting of RCC pipes including breaking the collars, loosening the
joint, separating the pipes, hoisting and keeping within a lead of 10 m Per Metre
but excluding earthwork excavation and refilling.
To follow as per
100mm to 300mm
AP. Standard data
22 Removing old G.I. pipes and specials / fittings and cleaning, scraping
the pipes, hoisting and keeping with in 50m lead but excluding earth
work excavation of trenches and refilling.
Dia of Pipes in mm
To follow as per
15mm to 50mm Per Metre
AP. Standard data
23 Cutting C.I./ DI Pipes without water in mains. Dia of pipes in mm.
Dia of Pipes in mm
To follow as per
80mm to 600mm Each cut
AP. Standard data
680 Each cut 302.00
24 Cutting A.C. Pipes without water in mains. Dia of pipes in mm.
Dia of Pipes in mm
80 Each cut 20.00
100 Each cut 20.00
125 Each cut 20.00
150 Each cut 20.00
200 Each cut 21.00
250 Each cut 33.00
300 Each cut 33.00
350 Each cut 42.00
400 Each cut 46.00
450 Each cut 57.00
500 Each cut 64.00
600 Each cut 70.00
25 Drilling and tapping CI/ DI / GI Main and fixing brass screw down
ferrule and plug.
Each
10 mm to 20mm
Tapping To follow as per
Each AP. Standard data
25 mm to 40mm
Tapping
26 Cutting road surface including stacking of excavated materials for
pipe line trench work.
a) Cutting open B.T. road surface (as well as asphalt concrete up to 75
10 Sqm 372.00
mm thick) including water bound macadam
257
Public Health Items
S of Rate for
2010-2011
1 2 3 4
b) Cutting open C.C. road surface 1 Cum 1035.00
c) Cutting open water bound macadam road including soiling 1 Cum 127.00
27 Bailing out water.(For PH item)
a) Bailing out water from the pipe line trenches with oil engine driven
pump sets, including hire charges, fuel charges and wages for Driver HP/Hour 30.00
and Helper.
b) Bailing out water from the pipe line trenches with Electric Driven
pump set including hire charges, current charges and wages for HP/Hour 22.00
Driver and Helper.
NOTE:- The rate is payable on the total H.P. hours ignoring fractions
less than 0.5 HP hour and rounding off 0.5 HP hour or more to the
next higher integer.
28 Shoring and strutting of trenches for water and sewer main.
10 Sqm of
a) Single Staging from (0 to 2.5 Mts.) Shoring
area To follow as per
10 Sqm of AP. Standard data
b) Double staging from (2.5 m to 4.5 Mts.) Shoring
area
29 Barricading, hoarding, lighting and watching etc., for water supply To follow as per
10 RM
and sewerage works for trenches. AP. Standard data
30 Excavation of trenches for infiltration galleries, syphon lines and
connecting mains in all soils under water including all leads, lifts,
shoring, strutting, bailing out water and removal of shoring and
strutting materials, after completion of pipe line work.
a) 0 to 1 m deep under water. 10 Cum 7952.00
b) 1 to 2 m deep under water. 10 Cum 11391.00
c) 2 to 5 m deep under water. 10 Cum 17099.00
d) Beyond 5 m deep under water for every additional 1 m depth over
10 Cum 3267.00
item 'c'
NOTE:- The above rates do not include rock requiring blasting or
chiseling
31 Laying and jointing glazed stoneware pipes including loose jointing
with cement fillets and all other incidental charges for infiltration
gallery, inclusive of bailing out water by pumping to keep the trench
reasonably dry to facilitate the work excluding cost of Stone Ware
pipes.
a) 200 mm to 400 mm Per Metre 359.00
32 Laying and jointing perforated RCC pipes inclusive of bailing out
water and jointing with cement fillets and all other incidental charges
for infiltration gallery inclusive of bailing out water by pumping to
keep the trench reasonably dry to facilitate the work excluding cost
of perforated pipes and collars.
per every 25 mm dia. Per Metre 24.00
33 Centering and scaffolding charges for RCC members including all
materials and labour charges for forming and dismantling.
a) for R C C Elevated Service Reservoir of staging up to 15 metre below
L W L.
1) Slabs for thickness (150 mm to 300 mm) 1936.00
2) Slabs for thickness above (300 mm) One Sqm of 3871.00
3) Side walls curved surfaces. Centering 1463.00
4) Side wall straight surfaces. area 1302.00
5) Dome. 1585.00
258
Public Health Items
S of Rate for
2010-2011
1 2 3 4
6) Roof Slab. 976.00
7) Column footing. 1067.00
8) Column braces and beams 653.00
9) Circular braces, ring beams & circular column. 715.00
Note:- For RCC ELSR of staging above 15 m, the % increase in these
rates shall be as follows.
15-18 m --- 9%
18-21m --- 15%
21-24 m --- 21%
24 m -27m --- 27%
above27m --- 30%
b) For Ground level works :-
1) Slabs 1 Sqm
To follow as per
2) Beams & Lintels 1 Sqm
AP. Standard data
3) Sun shades 1 Sqm
4) RCC vertical walls of plane surface up to 3 m height such as ground
1 Sqm 572.00
level tanks clarifiers and sludge digesters etc.
5) RCC vertical walls of circular faces up to 3 m height. 1 Sqm 729.00
NOTE:- Scaffolding for every extra height of 1 m or part thereof but
10 Sqm
not less than 0.5 m.
34 Lift or delift of materials :
a) Lifting of cement concrete for RCC elevated reservoir. For every 3
1 Cum 91.00
m height or part thereof over the initial lift of 5 m
b) Delifting the materials such as stones, concrete etc., for concrete
below ground level for construction of masonry ground level
reservoirs, construction of masonry ground level reservoirs,
1 Cum 28.00
inspection wells, test wells and sump wells etc., for every 2 m depth
or part thereof beyond the initial depth of 4 meters from ground
level.
35 Labour charges for fixing ventilating shafts complete with all To follow as per
Each
accessories. AP. Standard data
36 Labour charges for fixing water closets including fixing of foot rests
Each
(for all sizes).
37 Labour charges for fixing of flushing cistern including fixing of flush
Each
pipes, lead pipe, jointing etc., complete
Relevant Building
38 Labour charges for fixing wash hand basin including fixing of inlet and
Each SOR items.
waste pipe connections etc., complete
39 Fixing urinal with inlet and waste pipe connections etc., complete. Each
40 Refilling the trench for pipe line with excavated earth including
10 Cum
watering and tamping etc., complete
41 a) Extra allowance for isolated scattered works viz., valve pits / 25% extra over
chambers, public fountains, meter pits and manholes, delivery cistern Each the cost of
etc., complete. chamber.
41 b) Repairs to the existing mains, interconnections, replacement of
100% extra over
valves/specials etc., including the cutting ,jointing, bailing out of
the cost of work
water, drying, earth work excavation etc., complete.
42 Removal of wet silt and sludge from sullage drains with aid of baskets
10 Cum 1042.00
and vessels.
43 Well sinking in sandy and other loose soils under water either by
manual labour, divers, or dredgers, weighting the top of staining to
assist sinking etc., including dewatering and other incidental charges
such as hire charges for mechanical equipment etc
Up to 2 m below GL/m Per metre To adopt as per
259
Public Health Items
S of Rate for
2010-2011
1 2 3 4
From 2 to 4 m below GL/m Per metre AP. Standard data
From 4 to 6 m below GL/m Per metre
Note:-Below 10 m for every metre depth or part thereof add
Rs.250/- per m. For higher dia, observed data is to be prepared and
got approved.
44 Sinking in Hard strata other than rock but in soils like limestone,
gravel, clay under water including, pumping dewatering, hire charges Observed Data
for mechanical equipment etc., complete.
45 Rates for OHSRs/ELSRs including fixtures with a staging of 15 m,
without Seismic analysis.
a 500 Kilo litres Per litre 8.20
b 1000 Kilo litres Per litre 7.44
c 1500 Kilo litres Per litre 7.02
d 2000 Kilo litres Per litre 6.71
e 2500 Kilo litres Per litre 6.38
NOTE: -1)For intermediate ranges proportional rates may be
adopted.2) The above rates are applicable for Elevated Level Services
Reservoirs / OHSRs with RAFT FOUNDATION and a rate of Rs.3,700/-
per tonne for cement and Rs.34,000/- per tonne for steel.
2) For staging less than 15 m, the rate shall be reduced by Rs.0.02
paise per litre per every metre of difference in staging.
3) For staging above 15 m, the rate shall be increased by Rs.0.05
paise per litre per every metre of additional staging.
4) The above rates shall be increased / decreased due to
increase/decrease in the cost of cement by Basic rate x (Rc-3700) x
0.00007
Rc = Rate of cement (Rs per Mt) at this time of preparation of
estimate.
increase/decrease in the cost of Steel by Basic rate x (RS-34,000) x
0.00002
Rs = Rate of steel (Rs per Mt) at this time of preparation of estimate.
6) Rate inclusive of three coats of epoxy paint to inner surface of the
reservoir including roof dome.
7) The above rates be adopted for estimate purposes for construction
of ELSR for a finished work including 2 coats of weather proof
emulsion painting for external surfaces, lettering, all required
fixtures, pipes, bends, valves etc., for pipe connections but excluding
cost of pipes, bends and valves as per departmental designs and
drawings.
8) The above rates are applicable for wind pressure up to 350 kg / sq
m for every 100 kg/sqm decrease in wind pressure, the rate is to be
decreased by 5%
9) For tribal/Agency / Rural area, the above rates shall be increased
by 10%
10) If the ELSR is to be designed for seismic forces a) The above rates
are applied up to Zone-II earth quake. b) for Zone-III earth quake the
above rates are to be increased by 33 1/3% .
11) Fixtures include.
a) A balcony of 1.00 m width at floor slab level/ middle ring beam
level / top ring beam level with RCC post with GI pipe hand railing.
260
Public Health Items
S of Rate for
2010-2011
1 2 3 4
b) C.I. Manhole frame and cover : 0.60 x 0.6 m size 2 Nos.
c) RCC Mosquito proof ventilators.
d) RCC Finial - 1 No.
e) RCC precast ladders 0.45 m wide - 2 Nos.
f) RCC dog legged stair case of 1.00 m width with hand railing - 1
No.
g) RCC hand railing 0.75 m height all-round at floor level and roof
level.
h) Water level indicator of approved pattern - 1 No.
i) Lightening arrestor with all its accessories complete including
earthing - 1 No.
46 Rates for OHSRs/ELSRs including fixtures with a staging of 10 m
without Seismic analysis.
a Up to 10,000 Litres capacity Per litre 31.68
b 15,000 Litres capacity Per litre 21.79
c 20,000 Litres capacity Per litre 21.40
d 40,000 Litres capacity Per litre 20.76
e 60,000 Litres capacity Per litre 15.75
f 1,00,000 Litres capacity Per litre 14.54
g 2,00,000 Litres capacity Per litre 12.73
h 3,00,000 Litres capacity Per litre 11.94
i 4,00,000 Litres capacity Per litre 10.53
j 4,50,000 Litres capacity Per litre 9.12
NOTE: -1) For intermediate ranges proportional rates may be
adopted 2)The above rates are applicable for Elevated Level Services
Reservoirs / OHSRs with RAFT FOUNDATION and a rate of Rs.3,700/-
per tonne for cement and Rs.34,000/- per tonne for steel. The
Structure is M30 Grade concrete.
2) For every metre of staging less than 10 m, the rate shall be
reduced by Rs.0.02 paise per litre.
3) For every metre of staging above 10 m, the rate shall be increased
by Rs.0.05 paise per litre.
increase/decrease in the cost of cement by Basic rate x (Rc - 3700) x
0.00007
Rc = Rate of cement (Rs per Mt) at the time of preparation of
estimate.
5)The above rates shall be increased / decreased due to
increase/decrease in the cost of Steel by Basic rate x (RS - 34,000) x
0.00002
Rs = Rate of steel (Rs per Mt) at this time of preparation of estimate.
6) Rate inclusive of three coats of epoxy paint to inner surface of the
reservoir including roof dome.
7) The above rates be adopted for estimate purposes for construction
of ELSR for a finished work including 2 coats of weather proof
emulsion painting for external surfaces, lettering, all required
fixtures, pipes, bends, valves etc., for pipe connections but excluding
cost of pipes, bends and valves as per departmental designs and
drawings.
8) The above rates applicable for wind pressures up to 350 kg / sq m
for decrease in wind pressure the rate has to be decreased by 5% per
every 100kg/sqm. If the ELSR / OHSR is to be designed for seismic
forces also, cost shall be arrived by working out detailed quantities
261
Public Health Items
S of Rate for
2010-2011
1 2 3 4
based on the designs.
9) For Tribal/Agency/ Rural area, the above rates shall be increased
by 10%
10) If the ELSR is to be designed for seismic forces a) The above rates
are applied up to Zone-II earth quake. b) for Zone-III earth quake the
above rates are to be increased by 33 1/3% .
11) Fixtures include :
a) RCC or Aluminum ladder inside 0.45 m wide.
b) Spiral staircase on the outside.
c) Lightening arrestor, including conductor and earthing etc.
d) RCC ventilators with copper or stainless steel fly proof mesh.
e) RCC finial ventilators with copper or stainless steel fly proof mesh
f) Manholes frame and cover 0.75x0.75 m with frame as per IS
specifications (light duty) – 2 Nos
g) Railing with 32 mm dia G.I. Pipes (A class) in two rows around
OHSR fixed in RCC (1:2:4) posts of size 100x75x75 mm with 1.5 m
intervals around periphery on top of the OHSR for smaller capacities.
h) Water level indicator of good quality with ebonite/ copper float
approved pattern- 1 No
47 Construction of Rapid Gravity Filtration Plant including civil,
mechanical and electrical fully automation including trial running
etc., complete.
1) 2.0 Mld Per litre 2.09
5) 30.00 Mld and above Per litre 1.35
NOTE :-
a) For intermediate ranges proportional rates may be adopted
b) The above rates are applicable with cement @ rate of Rs.3,700/-
MT and steel of 34,000/MT.
c) The above rates shall be increased / decreased due to
increase/decrease in the cost of Cement by Basic rate x Rc - 3700) x
0.00007 Rc = Rate of cement (Rs per MT) at the time of preparation
of estimate.
d) The above rates shall be increased / decreased due to
increase/decrease in the cost of Steel by Basic rate x (RS - 34,000) x
0.00002
Rs = Rate of steel (Rs per MT) at the time of preparation of estimate.
e) For rural areas an extra allowance of 10% shall be given on basic
rate.
f) In case of raft foundation, additional cost involved due to provision
of raft foundation shall be worked out and paid extra.
g) For intermediate ranges proportional rates may be adopted
h)The components of the Filtration Plant are as follows.
A) Civil Works:
(all works of VRCC shall be in M30 design mix).
1)Stilling chamber .
2)Ventury flume channel with measuring devices
3)Flash mixer chamber
4) Tube settler & flocculation tanks.
5)Filter house, chemical house, Alum store, laboratory office room
chlorination plant room, toilet etc. (All items shall be under RCC roof
262
Public Health Items
S of Rate for
2010-2011
1 2 3 4
only ). Separate Isolated chemical house & chlorinator room for
treatment 15.00 Mld & above. For more than 5mld separate
Chemical house has to be provided.
6)Wash water tank of suitable capacity.
7) All the doors and windows are of aluminum make
8) All pipes and valves in filter beds are of D.I. make & connection
from Flash mixer to Tube settler / Flocculation tank, sludge disposal
pipes are of C.I. make.
9) The bottom level of the clear water control chamber must be
above G.L so as to dispose the leakage water by gravity.
B) Mechanical Equipment
1)Alum dosing equipment
2)Flash mixer equipment.
3)Sludge disposal fittings by gravity
4)Filtration plant equipment instrumentation and piping.
5)Clarifloccualation equipment (with stainless steel blades) with
rotating bridge arrangement etc.,
6)Wash water tank fittings and pump sets with 100% stand by.
7)Air blower with motor 100% stand by and pipe connections.
8) Chlorination equipment and pipe connections with chlorinator of
100% standby, Vacuum feed Gas Chlorination has to provided.
9)Spares & Tools for 2 years
10)Gaseous Chlorination with cylinders has to provided.
C) Electrical Equipment
1)Necessary power supply wiring to motors and switches bus bar
connections as per I.E. Rules
2)Internal wiring and illumination and fittings and fixtures for internal
and external lighting exhaust fans, ceiling fans etc.
3) Erecting mechanical & Electrical equipment, trial run for 90 days
23.50 hours per day testing the treated water for efficient standards
and maintenance of records and imparting training to staff.
4)Supply of 6 - sets of completion plans and maintenance manual and
brochures.
5)Provision towards soil investigation.
D) Automation for flow measurements

1)Automated Lab testing equipment of internationally approved
make and consumables for one year. For filtration plants of capacity
10 MLD and more automated online testing equipment shall be
installed.
2) Automation for flow of Conductivity, Turbidity, Ph value, Residual
Chlorine with recording & Storage facility (Computer based) & Alarm
by SMS or other methods.
3)Off - Site Supervisory and Data Accusation (OSSADA) system for
Raw water and clear water measuring, recording, Off-Site Digital
Display and data Transmission to Cell Phone(SMS).
Note : 1) Alam tanks must be bound with corrosion resistant material
(HDPE Lining, Bitumen Coating, tiles etc)
2) Mechanical equipment for Alam mixing and in flocculation tank
must be corrosive resistant (due to Alam)
263
Public Health Items
1. S.S.RATES FOR R.C.C. PLAIN ENDED PIPES
Sl. No. Description

1 2
MANUFACTURE, SUPPLY AND DELIVERY OF R.C.C. PLAIN ENDED PIPES CONFORMING TO B.I.S.
1
458/2003 , EX-FACTORY, EXCLUDING TRANSPORTATION, TAXES & DUTIES
Size Unit S S Rate For 2010-11
NP - 2 Class NP - 3 Class NP - 4 Class
80 mm dia Metre 120.00
300 mm dia Metre 329.00 761.00 772.00
350 mm dia Metre 409.00 927.00 945.00
400 mm dia Metre 471.00 1026.00 1047.00
450 mm dia Metre 578.00 1175.00 1186.00
500 mm dia Metre 632.00 1270.00 1459.00
600 mm dia Metre 939.00 1915.00 2254.00
700 mm dia Metre 1199.00 2370.00 3011.00
800 mm dia Metre 1469.00 3129.00 3919.00
900 mm dia Metre 1846.00 3920.00 4884.00
1000 mm dia Metre 2251.00 4885.00 6684.00
1100 mm dia Metre 2668.00 5746.00 7736.00
1200 mm dia Metre 3178.00 6762.00 9036.00
1400 mm dia Metre 4336.00 8718.00 12457.00
1600 mm dia Metre 5002.00 11283.00 14855.00
1800 mm dia Metre 6576.00 14929.00 19877.00
Note : All the prices are ex-works. Excise duty, CST/VAT extra as applicable at the time of supply.
The above rates of RCC Plain ended pipes are based on the following raw materials cost.
Cement. Rs.3,700/- per MT (including all taxes and freight).
Steel (M.S. Rods) - Rs.33,000/- per MT. (including all taxes and freight).
The revised cost of RCC pipes due to increase / decrease in the cost of raw materials shall be as per the
following formula.
Revised Cost =Cost as per the above table +R1+R2
R1= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of M.S. Roads = (S2-
S1)/1000 X Ws.
R2= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of Cement = (C2-C1)/1000
X Wc.
S1 = Rs. 33,000/- , S2 = Cost of M S Rods (Rs. Per MT including all taxes and freight) at the time of preparation
of estimate.
C1 = Rs. 3,700/- C2 = Cost of Cement (Rs. Per MT including all taxes and freight) at the time of preparation of
estimate.
Ws=Weight of MS Rods required (Kg.) per metre of pipe as per IS:458/2003.
Wc= Weight of Cement required (Kg.) per metre of pipe.
264
Public Health Items
2. S.S.RATES FOR R.C.C. COLLARS
Sl.
Description
No.
1 2
MANUFACTURE, SUPPLY AND DELIVERY OF R.C.C. COLLARS CONFORMING TO B.I.S.
1 458/2003 (RATE PER EACH COLLAR) SUITABLE FOR R.C.C. PLAIN ENDED PIPES INCLUDING
TRANSPORTATION BUT EXCLUDING TAXES & DUTIES
Size Unit S S Rates for 2010-11.
80 mm dia Each 36.00
300 mm dia Each 83.00 117.00 117.00
350 mm dia Each 103.00 147.00 147.00
400 mm dia Each 113.00 167.00 167.00
450 mm dia Each 179.00 223.00 223.00
500 mm dia Each 204.00 266.00 266.00
600 mm dia Each 273.00 349.00 349.00
700 mm dia Each 355.00 466.00 466.00
800 mm dia Each 498.00 594.00 594.00
900 mm dia Each 598.00 693.00 693.00
1000 mm dia Each 699.00 866.00 866.00
1100 mm dia Each 853.00 1095.00 1095.00
1200 mm dia Each 1034.00 1371.00 1371.00
1400 mm dia Each 1336.00 1737.00 1737.00
1600 mm dia Each 1704.00 2222.00 2222.00
1800 mm dia Each 1741.00 2857.00 2857.00
Note: Excise duty, CST/VAT extra as applicable at the time of supply.

The above rates of RCC Collars suitable to plain ended pipes are based on the following raw materials cost.
The revised cost of RCC collars due to increase / decrease in the cost of raw materials shall be as per the
following formula.
R1= Variation (increase / decrease) in cost (Rs. per each )due to change in the cost of M.S. Roads = (S2-
S1)/1000 X Ws.
R2= Variation (increase / decrease ) in cost (Rs. per each )due to change in the cost of Cement = (C2-C1)/1000
X Wc.
of estimate.
C1 = Rs. 3,700/-, C2 = Cost of Cement (Rs. Per MT including all taxes and freight) at the time of preparation of
estimate
Ws=Weight of MS Rods required (Kg.) per each collar.
Wc= Weight of Cement required (Kg.) per each collar.
265
Public Health Items
3. S.S.RATES FOR R.C.C. S/S PIPES (Non Pressure)
Sl. No. Description

1 2
MANUFACTURE, SUPPLY AND DELIVERY OF R.C.C. SOCKET AND SPIGOT PIPES
1 CONFORMING TO B.I.S. 458/2003 AT EX-FACTORY (RATE PER METER OF EFFECTIVE
LENGTH) EXCLUDING TRANSPORTATION, TAXES & DUTIES.
Size Unit S.S. Rates for 2010-11
300 mm dia Metre 399.00 976.00 1029.00
350 mm dia Metre 513.00 1233.00 1254.00
400 mm dia Metre 565.00 1366.00 1390.00
450 mm dia Metre 704.00 1508.00 1520.00
500 mm dia Metre 811.00 1722.00 1866.00
600 mm dia Metre 1142.00 2412.00 2448.00
700 mm dia Metre 1478.00 3074.00 3167.00
800 mm dia Metre 1894.00 4064.00 4123.00
900 mm dia Metre 2391.00 5100.00 5189.00
1000 mm dia Metre 2908.00 5756.00 6135.00
1100 mm dia Metre 3406.00 6778.00 7074.00
1200 mm dia Metre 3853.00 7991.00 8272.00
1400 mm dia Metre 5502.00 10578.00 11708.00
1600 mm dia Metre 6805.00 13701.00 13969.00
1800 mm dia Metre 7606.00 18133.00 18698.00
Note: All the prices are ex-works, Excise duty, CST/VAT extra as applicable at the time of supply. The above
rates of RCC S/S Non-Pressure pipes are based on the following raw materials cost.
following formula.
R1= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of M.S. Roads =(S2-
S1)/1000 X Ws.
R2= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of Cement =(C2-C1)/1000
X Wc.
of estimate.
C1 = Rs. 3,700/- , C2 = Cost of Cement (Rs. Per MT including all taxes and freight) at the time of preparation of
estimate
266
Public Health Items
4. S.S.RATES FOR R.C.C. S/S PIPES (Pressure)
Sl.No. Description
1 2
MANUFACTURE, SUPPLY AND DELIVERY OF R.C.C. SOCKET AND SPIGOT PIPES
1 CONFORMING TO B.I.S. 458/2003 EX-FACTORY (RATE PER METER OF EFFECTIVE
LENGTH) EXCLUDING TRANSPORTATION,TAXES & DUTIES.
P1 - Class P2 - Class P3 - Class
80 mm dia Metre 199.00 223.00 252.00
100 mm dia Metre 224.00 266.00 307.00
150 mm dia Metre 309.00 396.00 486.00
200 mm dia Metre 359.00 513.00 677.00
225 mm dia Metre 404.00 583.00 752.00
250 mm dia Metre 442.00 622.00 787.00
300 mm dia Metre 595.00 895.00 1110.00
350 mm dia Metre 741.00 1247.00 1607.00
400 mm dia Metre 879.00 1653.00 2124.00
450 mm dia Metre 937.00 1958.00 2611.00
500 mm dia Metre 1250.00 2121.00 2963.00
600 mm dia Metre 1711.00 3163.00 4102.00
700 mm dia Metre 2276.00 4149.00 5205.00
800 mm dia Metre 2848.00 4917.00 6285.00
900 mm dia Metre 3434.00 5775.00
1000 mm dia Metre 4335.00 6620.00
Note: All the prices are ex-works, Excise duty, CST/VAT extra as applicable at the time of supply.
The above rates of RCC S/S Pressure pipes are based on the following raw materials cost.
following formula.
R1= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of M.S. Roads =(S2-
S1)/1000 X Ws.
R2= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of Cement =(C2-C1)/1000
X Wc.
S1 = Rs. 33,000/-
S2 = Cost of M S Rods (Rs. Per MT including all taxes and freight) at the time of preparation of estimate.
C1 = Rs. 3,700/- C2 = Cost of Cement
(Rs. Per MT including all taxes and freight) at the time of preparation of estimate
267
Public Health Items
5. S.S. RATES FOR RUBBER RINGS TO SUIT R.C.C. S/S PIPES
Sl. No. Description

1 2
MANUFACTURE, SUPPLY AND DELIVERY OF RUBBER RINGS TO SUIT R.C.C. SOCKET AND
1 SPIGOT PIPES CONFORMING TO B.I.S. 5382/ 1985 (RATE PER EACH RUBBER RING)
INCLUDING TRANSPORTATION BUT EXCLUDING TAXES & DUTIES.
300 mm dia Each 69.00 88.00 88.00
350 mm dia Each 79.00 105.00 105.00
400 mm dia Each 87.00 120.00 120.00
450 mm dia Each 100.00 136.00 136.00
500 mm dia Each 131.00 156.00 156.00
600 mm dia Each 171.00 227.00 227.00
700 mm dia Each 233.00 272.00 272.00
800 mm dia Each 295.00 330.00 330.00
900 mm dia Each 370.00 446.00 446.00
1000 mm dia Each 433.00 538.00 538.00
1100 mm dia Each 521.00 689.00 689.00
1200 mm dia Each 833.00 866.00 866.00
1400 mm dia Each 916.00 953.00 953.00
1600 mm dia Each 1141.00 1163.00 1163.00
1800 mm dia Each 1422.00 1485.00 1485.00
MANUFACTURE, SUPPLY AND DELIVERY OF RUBBER RINGS TO SUIT R.C.C. SOCKET AND
2 SPIGOT PIPES CONFORMING TO B.I.S. 5382/ 1985 (RATE PER EACH RUBBER RING)
INCLUDING TRANSPORTATION BUT EXCLUDING TAXES & DUTIES.
Size P1 - Class P2 - Class P3 – Class
80 mm dia Each 18.00 18.00 18.00
100 mm dia Each 22.00 23.00 23.00
150 mm dia Each 39.00 39.00 39.00
200 mm dia Each 45.00 45.00 45.00
225 mm dia Each 50.00 51.00 53.00
250 mm dia Each 56.00 58.00 59.00
300 mm dia Each 69.00 73.00 76.00
350 mm dia Each 79.00 92.00 100.00
400 mm dia Each 87.00 120.00 123.00
Size P1 - Class P2 - Class P3 – Class
450 mm dia Each 100.00 138.00 141.00
500 mm dia Each 131.00 156.00 163.00
600 mm dia Each 171.00 194.00 196.00
700 mm dia Each 233.00 255.00 272.00
800 mm dia Each 295.00 326.00 326.00
900 mm dia Each 370.00 413.00
1000 mm dia Each 433.00 498.00
1100 mm dia Each 521.00
1200 mm dia Each 833.00
Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.
268
Public Health Items
6. S.S. RATES FOR CONVEYANCE OF R.C.C. PLAIN ENDED PIPES
Rate up to 5
Rate for
Kms Lead Rate up to 5 Kms Rate for every
every
including Lead including additional 1
Sl.No. Description additional 1
Loading, Loading, unloading KM lead or
KM lead or
unloading and stacking part thereof.
part thereof.
and stacking
1 2 3 4 5 6
CONVEYANCE OF R.C.C. PLAIN ENDED PIPES ON ALL WEATHER ROADS INCLUDING
1
LOADING, UNLOADING AND STACKING (per Metre)
NP - 2 Class NP - 3 Class & NP - 4 Class
80 mm dia 2.20 0.10
100 mm dia 2.60 0.10
150 mm dia 3.90 0.20
200 mm dia 5.10 0.20
225 mm dia 5.90 0.30
250 mm dia 6.80 0.30
300 mm dia 10.10 0.40 26.60 0.70
350 mm dia 13.20 0.80 28.70 0.80
400 mm dia 15.30 0.90 33.90 1.10
450 mm dia 19.40 1.10 37.20 1.30
500 mm dia 21.10 1.30 40.70 1.30
600 mm dia 30.50 2.00 60.90 2.80
700 mm dia 38.90 2.80 67.70 3.30
800 mm dia 45.80 2.80 81.20 3.30
900 mm dia 52.50 2.80 106.60 6.20
1000 mm dia 77.90 5.80 128.70 6.20
1100 mm dia 85.50 5.80 138.70 6.70
1200 mm dia 96.50 6.20 155.70 6.70
1400 mm dia 116.80 6.20 211.60 7.00
1600 mm dia 135.40 6.20 253.90 7.00
1800 mm dia 155.70 6.20 338.50 9.80
269
Public Health Items
7. S.S. RATES FOR CONVEYANCE OF R.C.C. S/S PIPES
Rate up to 5 Rate up to 5
Kms Lead Rate for every Kms Lead Rate for every
Sl.N including additional 1 including additional 1
Description
o. Loading, KM lead or part Loading, KM lead or part
unloading & thereof. unloading and thereof.
stacking stacking
1 2 3 4 5 6
CONVEYANCE OF R.C.C. SOCKET AND SPIGOT PIPES ON ALL WEATHER ROADS INCLUDING
1
LOADING, UNLOADING AND STACKING (per Metre of effective length)
Size NP - 2 & P1 Class NP – 3 & NP - 4 Class
80 mm dia 2.80 0.10
100 mm dia 3.20 0.20
150 mm dia 4.50 0.20
200 mm dia 5.80 0.40
225 mm dia 6.90 0.40
250 mm dia 7.70 0.70
300 mm dia 11.60 0.80 31.80 1.00
350 mm dia 14.40 0.90 33.90 1.20
400 mm dia 17.50 1.10 42.20 2.20
450 mm dia 20.00 1.20 46.50 2.20
500 mm dia 22.40 1.30 50.80 2.30
600 mm dia 29.60 2.20 69.40 3.30
700 mm dia 36.00 2.30 93.10 6.50
800 mm dia 49.90 3.50 110.00 6.50
900 mm dia 74.50 6.40 126.90 6.50
1000 mm dia 84.70 6.40 133.80 6.50
1100 mm dia 95.60 6.50 143.80 6.50
1200 mm dia 106.60 6.50 160.80 6.70
1400 mm dia 132.00 6.50 214.90 6.70
1600 mm dia 157.40 6.70 253.90 7.20
1800 mm dia 194.60 6.70 338.50 9.80
P2 - Class P3 – Class
80 mm dia 2.80 0.10 2.80 0.10
100 mm dia 3.20 0.20 3.20 0.20
150 mm dia 4.50 0.20 4.50 0.20
200 mm dia 6.30 0.40 8.50 0.70
225 mm dia 8.50 0.70 9.50 0.80
250 mm dia 8.90 0.80 11.20 0.90
300 mm dia 16.90 1.00 19.40 1.10
350 mm dia 21.30 1.20 27.10 1.30
400 mm dia 25.40 1.30 36.40 2.20
450 mm dia 32.10 2.10 44.80 2.20
500 mm dia 36.40 2.20 55.00 3.20
600 mm dia 48.30 2.20 78.70 4.10
700 mm dia 71.10 4.40 115.90 6.50
800 mm dia 94.80 6.20 147.30 6.50
900 mm dia 115.60 6.50
1000 mm dia 142.20 6.70
270
8. S.S.RATES FOR A.C. PIPES
Sl.No Description
MANUFACTURE AS PER BIS NO: 1592/2003AS AMENDED FROM TIME TO TIME (MAZZA PROCESS) AND
SUPPLY OF AC PRESSURE PIPES DULY MARKED WITH BIS MARK, INCLUDING COST OF MATERIAL,
1 INCIDENTAL HANDLING, LOADING AND PACKING CHARGES BUT ARE EXCLUSIVE OF TRANSPORTATION,
UNLOADING, STACKING AT DEPARTMENTAL STORES, EXCISE DUTY, VAT OCTROI AND OTHER GOVT.
LEVIES.
Size Unit S.S Rates for 2010-11
Class - 15 Class - 20 Class - 25
80 mm dia Rate/Metre 134.00 145.00 181.00
100 mm dia Rate/Metre 177.00 224.00 276.00
125 mm dia Rate/Metre 231.00 288.00 362.00
150 mm dia Rate/Metre 328.00 407.00 509.00
200 mm dia Rate/Metre 545.00 691.00 878.00
250 mm dia Rate/Metre 689.00 887.00 1113.00
300 mm dia Rate/Metre 969.00 1252.00 1596.00
350 mm dia Rate/Metre 1184.00 1537.00 1930.00
400 mm dia Rate/Metre 1542.00 2006.00 2489.00
450 mm dia Rate/Metre 1811.00 2398.00 3005.00
500 mm dia Rate/Metre 2249.00 2939.00 3692.00
600 mm dia Rate/Metre 3193.00 4159.00 5301.00
2 Lowering, laying and Jointing of AC Pressure pipes with AC Couplings or CID Joints complete with
Rubber Rings in readymade trenches true to alignment and gradient including filling with water lead up
to 500 mts and testing to required pressure including all sundries but excluding cost of jointing
materials and conveyance from source of supply as per BIS No. 6530/72
80 mm dia Rate/Metre 24.00 24.00 24.00
100 mm dia Rate/Metre 35.00 35.00 35.00
125 mm dia Rate/Metre 39.00 39.00 39.00
150 mm dia Rate/Metre 46.00 46.00 46.00
200 mm dia Rate/Metre 61.00 61.00 61.00
250 mm dia Rate/Metre 73.00 73.00 73.00
300 mm dia Rate/Metre 90.00 90.00 90.00
350 mm dia Rate/Metre 153.00 153.00 153.00
400 mm dia Rate/Metre 229.00 229.00 229.00
450 mm dia Rate/Metre 279.00 279.00 279.00
500 mm dia Rate/Metre 355.00 355.00 355.00
600 mm dia Rate/Metre 382.00 382.00 382.00
1. The above rates of AC Pipes are based on the Cement cost of RS 3,700/- per MT (Including all taxes and
freight).
2. The above rates of AC pipes are based on the Fiber cost of Rs 41,109/- per M.T basic price (Ex- India
Port) (Excluding duties, taxes and transportation etc.)
For any Increase/ Decrease in the rate of cement, the price of AC pipe per Rmt shall be
increased/decreased as under.
W x 0.85 x IC Where W = Weight of pipe in Kg’s/Rmt
IC = Increase/Decrease in cost of cement/Kg
For any increase/decrease in the rate of fiber, the price of AC pipe per Rmt shall be increased/Decreased
as under :
W x 0.15 X IF Where : W=: Weight of pipe in Kg’s/Rmt
IF = Increase /Decrease in cost of fiber/Kg
Note: 1) The Fiber rates are to be obtained from A.C. Pipe manufacturer of “Mazza” process.
2) The cement rate shall be communicated by the sub-committee of Board of Chief
engineers.
3)The duties and taxes as applicable shall be added as per rules at the time of preparation of
estimate
Transportation of AC pressure pipes at site of work anywhere in Andhra 10% on the basic
Pradesh on motor able roads for full truck loads including transit cost of
2
insurance, unloading, and stacking at site of work etc. Complete (AC corresponding AC
Couplings and Rubber rings are to be supplied free of transportation Pressure pipes.
271
Public Health Items
charges).
9. S.S.RATES FOR A.C. COUPLINGS
Sl.
Description
No.
1 2
MANUFACTURE AS PER MANUFACTURERS SPECIFICATION (MAZZA PROCESS) AND
SUPPLY OF A.C. COUPLINGS EXCLUDING COST OF RUBBER RINGS TO SUIT AC
1 PRESSURE PIPES INCLUDING COST OF MATERIAL, INCIDENTAL HANDLING, PACKING
TRANSPORTATION AND UNLOADING AT SITE TRANSIT RISK BUT EXCLUDING EXCISE
DUTY, VAT AND OTHER GOVT. LEVIES.
Size Unit S.S Rates for 2010-11.
80 mm dia Rate/Each 71.00 75.00 86.00
100 mm dia Rate/Each 93.00 96.00 116.00
125 mm dia Rate/Each 116.00 126.00 152.00
150 mm dia Rate/Each 132.00 166.00 206.00
200 mm dia Rate/Each 246.00 261.00 334.00
250 mm dia Rate/Each 285.00 358.00 457.00
300 mm dia Rate/Each 372.00 480.00 617.00
350 mm dia Rate/Each 485.00 627.00 803.00
400 mm dia Rate/Each 747.00 976.00 1258.00
450 mm dia Rate/Each 896.00 1181.00 1523.00
500 mm dia Rate/Each 1068.00 1429.00 1832.00
600 mm dia Rate/Each 1284.00 1598.00 2044.00
1. The above rates of AC Coupling are based on the Cement cost of RS 3,700/- per MT (Including all taxes and freight).
2. The above rates of AC Coupling are based on the Fiber cost of Rs 41,109/- per M.T basic price (Ex- Indian Port) (Excluding
duties, taxes and transportation etc.)
For any Increase/ Decrease in the rate of cement, the price of AC Coupling per Each shall be increased/decreased as under.
W x 0.85 x IC Where W = Weight of Coupling in Kg’s/Each
IC = Increase/Decrease in cost of cement/kg
For any increase/decrease in the rate of fiber, the price of AC Coupling per Each shall be increased/Decreased as under :
W x 0.15 X IF Where : W=: Weight of Coupling in Kg’s/Each
IF = Increase /Decrease in cost of fiber/kg
The Fiber rates are to be obtained from A.C. Pipe manufacturer of “Mazza” process.
272
Public Health Items
10. S.S.RATES FOR RUBBER RINGS TO SUIT A.C. COUPLINGS
Sl.
Description
No.
1 2
SCHEDULE OF RATE FOR SUPLY OF RUBBER RINGS MANUFACTURED AS PER BIS:
5382/1988 WITH BIS MARK EMBOSSED PER EACH SET SUITABLE FOR A.C. COUPLINGS
1
INCLUDING COST OF MATERIAL, INCIDENTAL, HANDLING, PACKING, TRANSPORTATION
AND UNLOADING AT SITE TRANSIT RISK ETC., BUT EXCLUDING VAT.
80 mm dia Each Set 46.00 46.00 46.00
100 mm dia Each Set 56.00 56.00 56.00
125 mm dia Each Set 74.00 74.00 74.00
150 mm dia Each Set 94.00 94.00 94.00
200 mm dia Each Set 96.00 96.00 96.00
250 mm dia Each Set 112.00 112.00 112.00
300 mm dia Each Set 112.00 112.00 112.00
350 mm dia Each Set 127.00 127.00 127.00
400 mm dia Each Set 155.00 155.00 155.00
450 mm dia Each Set 183.00 183.00 183.00
500 mm dia Each Set 211.00 211.00 211.00
600 mm dia Each Set 239.00 239.00 239.00
Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate
273
Public Health Items
11. S.S. RATES FOR PRE-STRESSED (NON-CYLINDER) CONCRETE PIPES

Sl.No. Description
1 2
MANUFACTURE, SUPPLY, DELIVERY OF PRE-STRESSED (NON-CYLINDER) CONCRETE PIPES CONFORMING TO IS 784/2001 Ex-factory excluding transportation,
1
taxes & duties.
Rs. Rs. Rs. Rs. Rs. Rs.
6 Kg/cm2 8 Kg/cm2 10 Kg/cm2 12 Kg/cm2 14 Kg/cm2 16 Kg/cm2
350 MM DIA Metre 2460 2470 2480 2490 2540 2630
400 MM DIA Metre 2640 2660 2690 2720 2770 2810
450 MM DIA Metre 2800 2810 2840 2890 2960 3020
500 MM DIA Metre 3030 3040 3060 3120 3180 3270
600 MM DIA Metre 3480 3500 3530 3630 3740 3850
700 MM DIA Metre 4270 4280 4340 4430 4580 4690
800 MM DIA Metre 5030 5070 5190 5300 5500 5670
900 MM DIA Metre 5830 5860 5980 6210 6440 6850
1000 MM DIA Metre 6840 6880 7060 7320 7650 8020
1100 MM DIA Metre 7760 7850 8050 8470 8800 9200
1200 MM DIA Metre 8600 8720 9150 9550 10360 10850
1300 MM DIA Metre 9740 10260 10790 11330 12250 13320
1400 MM DIA Metre 11110 11710 12340 13340 14340 15080
1500 MM DIA Metre 12950 13660 14370 15520 16620 17460
1600 MM DIA Metre 14570 15380 16190 18230 18800 19750
1700 MM DIA NEW ITEM Metre 16040 16740 17580 19660 21790 22910
Cost of laying jointing, testing to Hydrostatic field test pressure including cost of rubber rings, cost of transportation of water and emptying pipe line after
2
completion of field testing etc.
350 MM DIA Metre 132 132 132 132 132 132
400 MM DIA Metre 143 143 143 143 143 143
450 MM DIA Metre 165 165 165 165 165 165
500 MM DIA Metre 176 176 176 176 176 176
600 MM DIA Metre 215 215 215 215 215 215
700 MM DIA Metre 253 253 253 253 253 253
274
Public Health Items
800 MM DIA Metre 286 286 286 286 286 286

900 MM DIA Metre 314 314 314 314 314 314
1000 MM IA Metre 363 363 363 363 363 363
1100 MM IA Metre 407 407 407 407 407 407
1200 MMDIA Metre 451 451 451 451 451 451
1300 MM DIA Metre 512 512 512 512 512 512
1400 MM DIA Metre 578 578 578 578 578 578
1500 MM DIA Metre 627 627 627 627 627 627
1600 MM DIA Metre 704 704 704 704 704 704
CONVEYANCE OF PRE-STRESSED (NON-CYLINDER) CONCRETE PIPIES AND ACCESSORIES including loading at Factory, un-loading at site and stacking for the
3
following sizes.(Minimum distance of 100 KM to be considered if the distance is less by 100 KM from factory to site)
350 MM DIA PerKM/M 0.92 0.92 0.92 0.92 0.92 0.92
400 MM DIA PerKM/M 0.92 0.92 0.92 0.92 0.92 0.92
450 MM DIA PerKM/M 1.05 1.05 1.05 1.05 1.05 1.05
500 MM DIA PerKM/M 1.15 1.15 1.15 1.15 1.15 1.15
600 MM DIA PerKM/M 1.35 1.35 1.35 1.35 1.35 1.35
700 MM DIA PerKM/M 2.25 2.25 2.25 2.25 2.25 2.25
800 MM DIA PerKM/M 2.25 2.25 2.25 2.25 2.25 2.25
900 MM DIA PerKM/M 2.25 2.25 2.25 2.25 2.25 2.25
1000 MM DIA PerKM/M 3.50 3.50 3.50 3.50 3.50 3.50
1100 MM DIA PerKM/M 3.50 3.50 3.50 3.50 3.50 3.50
1200 MM DIA PerKM/M 6.80 6.80 6.80 6.80 6.80 6.80
1300 MM DIA PerKM/M 6.90 6.90 6.90 6.90 6.90 6.90
1400 MM DIA PerKM/M 6.90 6.90 6.90 6.90 6.90 6.90
1500 MM DIA PerKM/M 6.90 6.90 6.90 6.90 6.90 6.90
1600 MM DIA PerKM/M 7.80 7.80 7.80 7.80 7.80 7.80
1700 MM DIA NEW ITEM PerKM/M 7.80 7.80 7.80 7.80 7.80 7.80
4 Cost of Machine end pair (Socket+Spigot) for providing MS Specials on PSC Pipelines excluding Cost of MS Special including cost and conveyance to site etc.,
275
Public Health Items
complete.
350 MM DIA Per Pair 9,350 9,350 9,350 9,350 9,350 9,350
400 MM DIA Per Pair 10,725 10,725 10,725 10,725 10,725 10,725
450 MM DIA Per Pair 12,100 12,100 12,100 12,100 12,100 12,100
500 MM DIA Per Pair 13,475 13,475 13,475 13,475 13,475 13,475
600 MM DIA Per Pair 16,170 16,170 16,170 16,170 16,170 16,170
700 MM DIA Per Pair 18,920 18,920 18,920 18,920 18,920 18,920
800 MM DIA Per Pair 21,670 21,670 21,670 21,670 21,670 21,670
900 MM DIA Per Pair 24,420 24,420 24,420 24,420 24,420 24,420
1000 MM DIA Per Pair 26,950 26,950 26,950 26,950 26,950 26,950
1100 MM DIA Per Pair 29,700 29,700 29,700 29,700 29,700 29,700
1200 MM DIA Per Pair 32,450 32,450 32,450 32,450 32,450 32,450
1300 MM DIA Per Pair 34,980 34,980 34,980 34,980 34,980 34,980
1400 MM DIA Per Pair 41,250 41,250 41,250 41,250 41,250 41,250
1500 MM DIA Per Pair 48,400 48,400 48,400 48,400 48,400 48,400
1600 MM DIA Per Pair 53,900 53,900 53,900 53,900 53,900 53,900
1700 MM DIA Per Pair 60,480 60,480 60,480 60,480 60,480 60,480
1800 MM DIA Per Pair 69,120 69,120 69,120 69,120 69,120 69,120
1900 MM DIA Per Pair 79,920 79,920 79,920 79,920 79,920 79,920
2000 MM DIA Per Pair 96,120 96,120 96,120 96,120 96,120 96,120
Cost of MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming to IS:7322-1985 and flange dimensions
5
confirming to IS:1538-1993 excluding cost of MS Specials including cost and conveyance to site, VAT etc., complete.
Diameter and thickness Unit Rate Diameter and thickness Unit Rate
80 mm DIA x 15 mm thick Each Flange 500 mm DIA x 20 mm Each Flange
605 6,116
thick
825 7,700
thick
990 10,890
thick
1,320 11,990
thick
1,650 13,420
thick
2,145 15,400
thick
276
Public Health Items

2,431 18,150
thick
3,542 19,228
thick
4,422 20,790
thick
5,137 27,610
thick
Note: a) The above rate of PSC pipes are based on the HT wire cost of Rs.51,000/-MT (Basic+ CED+ST & freight).
and cement price of Rs.3,700/- per MT (including all taxes and freight)
The rates may be revised depending upon the increase/decrease in the cost of HT wire and cement. as per the following method. The cost of HT wire may be obtained from
reputed firms like SAIL/TATA/ SS Ltd. etc.,
Revised Cost =Cost as per the above table +R1+R2.
R1= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of HT Wire =(H2-H1)/1000 X Wh.
R2= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of Cement =(C2-C1)/1000 X Wc.
H1 = Rs. 51,000/- H2 = Cost of HT Wire (Rs. Per MT including all taxes and freight) at the time of preparation of estimate.
C1 = Rs. 3700/- C2 = Cost of Cement (Rs. Per MT including all taxes and freight) at the time of preparation of estimate
Wh=Weight of HT Wire required (Kg.) per metre of pipe.
The rates for MS flanges are considering landed price of MS Plates of Rs.40,000/- per MT. Price variation to be released on actual weight of flange.
277
Public Health Items
12. S.S. RATES FOR PRE-STRESSED (CYLINDER) CONCRETE PIPES

Sl
Description
No.
1 2
PRE-STRESSED (CYLINDER TYPE ) CONCRETE PIPES CONFORMING TO IS 784/2001 @ Ex-factory Cost of pipes, excluding transportation, laying, jointing, testing, Bends, Tees,
1
Specials, taxes & duties Etc.
8 20
4 Kg/cm2 6 Kg/cm2 10 Kg/cm2 12 Kg/cm2 14 Kg/cm2 16 Kg/cm2 18 Kg/cm2
Kg/cm2 Kg/cm2
400 MM DIA Meter 4550 4550 4550 4550 4570 4610 4680 4750 4800
450 MM DIA Meter 4940 4940 4940 4960 5010 5070 5160 5220 5290
500 MM DIA Meter 5400 5400 5410 5570 5530 5610 5680 5790 5870
600 MM DIA Meter 6410 6450 6520 6620 6710 6800 6940 7070 7200
700 MM DIA Meter 7390 7490 7610 7740 7860 7980 8130 8320 8460
800 MM DIA Meter 8660 8800 8970 9140 9290 9450 9640 9850 10100
900 MM DIA Meter 10240 10420 10630 10840 11050 11240 11510 11780 12050
1000 MM DIA Meter 11850 12090 12340 12600 12860 13090 13410 13740 14080
1100 MM DIA Meter 13124 13408 13715 14011 14317 14591 14941 15313 16123
1200 MM DIA Meter 14853 15183 15544 15905 16277 16605 17010 17821 18400
1300 MM DIA Meter 16498 16904 17319 17746 18174 18557 19520 20040 20697
1400 MM DIA Meter 18070 18540 19032 19525 20018 20981 21583 22201 23572
1500 MM DIA Meter 19761 20280 20799 21318 22396 22981 23875 25213 23143
1600 MM DIA Meter 22287 22861 23447 24551 25225 25898 27566 28306 29023
1700 MM DIA Meter 23984 24647 25364 26624 27386 28799 30080 30887 31649
1800 MM DIA Meter 26260 26959 28333 29187 30018 31569 32933 33897 34851
1900 MM DIA Meter 30698 31496 33025 33948 35572 36587 38123 39193 40199
2000 MM DIA Meter 32759 34272 35299 36359 38214 39330 41063 42289 43382
Cost of laying jointing, testing to Hydrostatic field test pressure including cost of cost of site welding and fixing of Polypropylene Diapher cloth, cost of transportation of
2
water and emptying pipe line after completion of field testing etc.
400 MM DIA Meter 291.00 291.00 291.00 291.00 291.00 291.00 291.00 291.00 291.00
450 MM DIA Meter 343.00 343.00 343.00 343.00 343.00 343.00 343.00 343.00 343.00
500 MM DIA Meter 374.00 374.00 374.00 374.00 374.00 374.00 374.00 374.00 374.00
600 MM DIA Meter 437.00 437.00 437.00 437.00 437.00 437.00 437.00 437.00 437.00
700 MM DIA Meter 499.00 499.00 499.00 499.00 499.00 499.00 499.00 499.00 499.00
278
Public Health Items
800 MM DIA Meter 572.00 572.00 572.00 572.00 572.00 572.00 572.00 572.00 572.00
900 MM DIA Meter 645.00 645.00 645.00 645.00 645.00 645.00 645.00 645.00 645.00
1000 MM DIA Meter 707.00 707.00 707.00 707.00 707.00 707.00 707.00 707.00 707.00
1100 MM DIA Meter 801.00 801.00 801.00 801.00 801.00 801.00 801.00 801.00 801.00
1200 MM DIA Meter 874.00 874.00 874.00 874.00 874.00 874.00 874.00 874.00 874.00
1300 MM DIA Meter 936.00 936.00 936.00 936.00 936.00 936.00 936.00 936.00 936.00
1400 MM DIA Meter 1030.00 1030.00 1030.00 1030.00 1030.00 1030.00 1030.00 1030.00 1030.00
1500 MM DIA Meter 1144.00 1144.00 1144.00 1144.00 1144.00 1144.00 1144.00 1144.00 1144.00
1600 MM DIA Meter 1238.00 1238.00 1238.00 1238.00 1238.00 1238.00 1238.00 1238.00 1238.00
1700 MM DIA Meter 1394.00 1394.00 1394.00 1394.00 1394.00 1394.00 1394.00 1394.00 1394.00
1800 MM DIA Meter 1477.00 1477.00 1477.00 1477.00 1477.00 1477.00 1477.00 1477.00 1477.00
1900 MM DIA Meter 1612.00 1612.00 1612.00 1612.00 1612.00 1612.00 1612.00 1612.00 1612.00
2000 MM DIA Meter 1716.00 1716.00 1716.00 1716.00 1716.00 1716.00 1716.00 1716.00 1716.00
CONVEYANCE OF PRE-STRES-SED (CYLINDER TYPE) CONCRETE PIPIES AND ACCESSORIES including loading at Factory, un-loading at site and stacking for the following sizes.
3
(Minimum distance of 100 KM to be considered if the distance is less by 100 KM from factory to site)
400 MM DIA Per KM/M 0.90 0.90 0.90 0.90 0.90 0.90 0.90 0.90 0.90
450 MM DIA Per KM/M 0.90 0.90 0.90 0.90 0.90 0.90 0.90 0.90 0.90
500 MM DIA Per KM/M 1.10 1.10 1.10 1.10 1.10 1.10 1.10 1.10 1.10
600 MM DIA Per KM/M 1.30 1.30 1.30 1.30 1.30 1.30 1.30 1.30 1.30
700 MM DIA Per KM/M 2.20 2.20 2.20 2.20 2.20 2.20 2.20 2.20 2.20
800 MM DIA Per KM/M 2.20 2.20 2.20 2.20 2.20 2.20 2.20 2.20 2.20
900 MM DIA Per KM/M 2.20 2.20 2.20 2.20 2.20 2.20 2.20 2.20 2.20
1000 MM DIA Per KM/M 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40
1100 MM DIA Per KM/M 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.40
1200 MM DIA Per KM/M 6.70 6.70 6.70 6.70 6.70 6.70 6.70 6.70 6.70
1300 MM DIA Per KM/M 6.70 6.70 6.70 6.70 6.70 6.70 6.70 6.70 6.70
1400 MM DIA Per KM/M 6.70 6.70 6.70 6.70 6.70 6.70 6.70 6.70 6.70
1500 MM DIA Per KM/M 6.70 6.70 6.70 6.70 6.70 6.70 6.70 6.70 6.70
1600 MM DIA Per KM/M 6.70 6.70 6.70 6.70 6.70 6.70 6.70 6.70 6.70
1700 MM DIA Per KM/M 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20
1800 MM DIA Per KM/M 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20
1900 MM DIA Per KM/M 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20
2000 MM DIA Per KM/M 8.60 8.60 8.60 8.60 8.60 8.60 8.60 8.60 8.60
279
Public Health Items
Note: The rates of PCCP pipes which were incorporated in the SOR are based on the following raw materials cost.
HT Wire: - Rs.51,000/- (including all taxes & freight)
HR Coil (Hot Rolled): - Rs.42,500/- (including all taxes & freight)
Cement Cost Rs. 3,700/-.per MT (including all duties, taxes & freight)
The rates may be revised depending upon the increase/ decrease in the cost of raw materials (landed price) as per the following method.
Revised Cost =Cost as per the above table +R1+R2+R3.
R1= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of HT Wire =(H2-H1)/1000 X Wh.
R2= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of HR Coil =(R2-R1)/1000 X Wr.
R3= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of Cement =(C2-C1)/1000 X Wc .
H1 = Rs. 51,000/- H2 = Cost of HT Wire (Rs. Per MT including all taxes and freight) at the time of preparation of estimate.
R1 = Rs. 42,500/- R2 = Cost of HR Coil (Rs. Per MT including all taxes and freight) at the time of preparation of estimate .
C1 = Rs. 3,700/- C2 = Cost of Cement (Rs. Per MT including all taxes and freight) at the time of preparation of estimate
Wh=Weight of HT Wire required (Kg.) per metre of pipe. Wc= Weight of Cement required (Kg.) per metre of pipe.
Wr = Weight of HR Coil required (kg) per metre of pipe.
280
Public Health Items
13. S.S. RATES FOR BAR WRAPPED STEEL CYLINDRICAL (BWSC) PIPES
Sl.
Description
No.
1 2
BAR WRAPPED STEEL CYLINDRICAL (BWSC) PIPES CONFORMING TO IS 15155 - 2002, Ex-factory excluding transportation, taxes and duties etc., for Bar wrapped steel
1
cylindrical pipes.
Size Unit Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs.
2 14 2 2 2 2 2 26 28 30
4 -12 Kg/cm 2 16 Kg/cm 18 Kg/cm 20 Kg/cm 22 Kg/cm 24 Kg/cm 2 2 2
Kg/cm Kg/cm Kg/cm Kg/cm
250 MM DIA Meter 2679 2679 2679 2679 2679 2679 2681 2713 2736 2886
300 MM DIA Meter 3011 3011 3011 3011 3011 3047 3124 3239 3296 3476
350 MM DIA Meter 3654 3654 3654 3671 3701 3734 3825 3956 4068 4258
400 MM DIA Meter 4006 4006 4026 4074 4111 4298 4464 4632 4787 5427
450 MM DIA Meter 4411 4425 4481 4524 4740 4932 5153 5350 5563 6063
500 MM DIA Meter 4933 4982 5044 5278 5533 5794 6072 6309 6724 7174
600 MM DIA Meter 6509 6588 6669 7047 7419 7728 8132 8502 9025 9515
700 MM DIA Meter 7848 8018 8549 9065 9579 10114 10821 11237 11788 12588
800 MM DIA Meter 8903 9585 10244 10890 11566 12460 13169 14186 14865 15855
900 MM DIA Meter 11020 11438 12287 13124 13936 14581 16098 17200 18023 19313
1000 MM DIA Meter 12423 13542 14511 15477 16493 17994 19661 21071 22167 23837
1100 MM DIA Meter 17883 18204 18325 20086 22082 23494 26013 27426 29236 31916
1200 MM DIA Meter 19779 20340 21018 23145 25419 27500 29851 30979 34670 38320
Cost of laying jointing, testing to Hydrostatic field test pressure including cost of site welding and fixing of Polypropylene Diaher cloth, cost of transportation of water
2
and emptying pipe line after completion of field testing.
250 MM DIA Meter 219 219 219 219 219 219 219 219 219 219
300 MM DIA Meter 257 257 257 257 257 257 257 257 257 257
350 MM DIA Meter 305 305 305 305 305 305 305 305 305 305
400 MM DIA Meter 341 341 341 341 341 341 341 341 341 341
450 MM DIA Meter 341 341 341 341 341 341 341 341 341 341
500 MM DIA Meter 427 427 427 427 427 427 427 427 427 427
600 MM DIA Meter 524 524 524 524 524 524 524 524 524 524
700 MM DIA Meter 610 610 610 610 610 610 610 610 610 610
800 MM DIA Meter 695 695 695 695 695 695 695 695 695 695
900 MM DIA Meter 817 817 817 817 817 817 817 817 817 817
1000 MM DIA Meter 903 903 903 903 903 903 903 903 903 903
281
Public Health Items
1100 MM DIA Meter 1061 1061 1072 1072 1093 1093 1114 1114 1114 1114
1200 MM DIA Meter 1188 1188 1230 1230 1251 1251 1294 1294 1294 1379
Conveyance of Bar Wrapped steel Cylindrical (BWSC) pipes and accessories including loading at Factory, un-loading at site and stacking for the
3
following sizes. (Minimum distance of 100 KM to be considered if the distance is less by 100 KM from factory to site)
250 MM DIA Per KM/M 0.42 0.42 0.42 0.42 0.42 0.42 0.42 0.42 0.42 0.42
300 MM DIA Per KM/M 0.42 0.42 0.42 0.42 0.42 0.42 0.42 0.42 0.42 0.42
350 MM DIA Per KM/M 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63
400 MM DIA Per KM/M 0.74 0.74 0.74 0.74 0.74 0.74 0.74 0.74 0.74 0.74
450 MM DIA Per KM/M 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95
500 MM DIA Per KM/M 1.05 1.05 1.05 1.05 1.05 1.05 1.05 1.05 1.05 1.05
600 MM DIA Per KM/M 1.16 1.16 1.16 1.16 1.16 1.16 1.16 1.16 1.16 1.16
700 MM DIA Per KM/M 1.37 1.37 1.37 1.37 1.37 1.37 1.37 1.37 1.37 1.37
800 MM DIA Per KM/M 1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79
900 MM DIA Per KM/M 1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79 1.79
1000 MM DIA Per KM/M 2.31 2.31 2.31 2.31 2.31 2.31 2.31 2.31 2.31 2.31
1100 MM DIA Per KM/M 5.46 5.46 5.46 5.46 5.46 5.46 5.46 5.46 5.46 5.46
1200 MM DIA Per KM/M 7.67 7.67 7.67 7.67 7.67 7.67 7.67 7.67 7.67 7.67
Note: The above rates of BWSC pipes are based on the following raw materials' cost.
HR Plates - Rs.42,500/- per MT (Basic+CED+ST & freight)
Wire rods - Rs.40,500/- per MT (Basic+CED+ST & freight)
Cement Cost Rs. 3,700/-.per MT (including all duties, taxes & freight)
The rates may be revised depending upon the increase/ decrease in the cost of raw materials (landed price) as per the following method.
Revised Cost =Cost as per the above table +R1+R2+R3.
R1= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of HR Plate =(H2-H1)/1000 X Wh.
R2= Variation (increase / decrease ) in cost (Rs. per metre )due to change in the cost of wire rods =(W2-W1)/1000 X Ww. R3= Variation (increase / decrease
) in cost (Rs. per metre )due to change in the cost of Cement =(C2-C1)/1000 X Wc .
H1 = Rs. 42,500/- H2 = Cost of HR Plate (Rs. Per MT including all taxes and freight) at the time of preparation of estimate. W1 = Rs. 40,500/- W2 = Cost of
Wire rods (Rs. Per MT including all taxes and freight) at the time of preparation of estimate . C1 = Rs. 3,700/- C2 = Cost of Cement (Rs. Per MT including all
taxes and freight) at the time of preparation of estimate Wh=Weight of HR Plate required (Kg.) per metre of pipe. Wc= Weight of Cement required (Kg.) per
metre of pipe.
Ww = Weight of wire rods required (kg) per metre of pipe.
282
Public Health Items
14. S.S. RATES FOR M.S.SPIRAL PIPES (2010-11)
Thickness
Sl.No. Description Unit Rate (Rs.)
in mm
1 2 3 4 5
1 Manufacture, Supply and Delivery of Spirally
welded M.S Pipes Conforming to IS 3589/2001
including in lining with Cement motor
(1:2)12mm thick using 4 numbers of 6mm dia
M.S. Rings at each end of the pipe and Out
coating cement motor (1:3) 30mm thick by
shorcreting or Guniting duly providing wire
mesh of size 50x50x3mm including cost of all
materials, Labour charges, Transportation to
anywhere in AP, but excluding taxes & duties,
etc.
500 MM DIA Meter 8.00 7002
600 MM DIA Meter 8.00 8342
700 MM DIA Meter 8.00 9731

700 MM DIA Meter 10.00 12366
800 MM DIA Meter 8.00 11173

800 MM DIA Meter 10.00 13067
800 MM DIA NEW ITEM Meter 12.00 15718
900 MM DIA Meter 8.00 12458

900 MM DIA Meter 10.00 14586
900 MM DIA Meter 12.00 16718
1000 MM DIA Meter 8.00 14007

1000 MM DIA Meter 10.00 16362
1000 MM DIA Meter 12.00 18636
1100 MM DIA Meter 8.00 16706

1100 MM DIA Meter 10.00 19296
1100 MM DIA Meter 12.00 21889
1200 MM DIA Meter 8.00 18988

1200 MM DIA Meter 10.00 21803
1200 MM DIA Meter 12.00 24630
1200 MM DIA Meter 14.00 27469
1300 MM DIA Meter 8.00 20745

1300 MM DIA Meter 10.00 23791
1300 MM DIA Meter 12.00 26849
1300 MM DIA Meter 14.00 29915
1300 MM DIA Meter 16.00 32995
283
Public Health Items
1400 MM DIA Meter 8.00 22030

1400 MM DIA Meter 10.00 25306
1400 MM DIA Meter 12.00 28595
1400 MM DIA Meter 14.00 31895
1400 MM DIA Meter 16.00 35202
1500 MM DIA Meter 8.00 23577

1500 MM DIA Meter 10.00 27089
1500 MM DIA Meter 12.00 30603
1500 MM DIA Meter 14.00 34134
1500 MM DIA Meter 16.00 37672
1500 MM DIA Meter 18.00 41216
1600 MM DIA Meter 8.00 24877

1600 MM DIA Meter 10.00 28599
1600 MM DIA Meter 12.00 32349
1600 MM DIA Meter 14.00 36111
1600 MM DIA Meter 16.00 39879
1600 MM DIA Meter 18.00 43654
1700 MM DIA Meter 8.00 26408

1700 MM DIA Meter 10.00 30377
1700 MM DIA Meter 12.00 34357
1700 MM DIA Meter 14.00 38347
1700 MM DIA Meter 16.00 42344
1700 MM DIA Meter 18.00 46355
1800 MM DIA Meter 8.00 27955

1800 MM DIA Meter 10.00 32154
1800 MM DIA Meter 12.00 36366
1800 MM DIA Meter 14.00 40589
1800 MM DIA Meter 16.00 44813
1800 MM DIA Meter 18.00 49055
1800 MM DIA Meter 20.00 53304

284
Public Health Items
1900 MM DIA Meter 10.00 33670
1900 MM DIA Meter 12.00 38108
1900 MM DIA Meter 14.00 42560
1900 MM DIA Meter 16.00 47021
1900 MM DIA Meter 18.00 51493
1900 MM DIA Meter 20.00 55969

2000 MM DIA Meter 10.00 35185
2000 MM DIA Meter 12.00 39857
2000 MM DIA Meter 14.00 44537
2000 MM DIA Meter 16.00 49228
2000 MM DIA Meter 18.00 53931
2000 MM DIA Meter 20.00 58636
2000 MM DIA Meter 22.00 63315

2100 MM DIA Meter 10.00 36962
2100 MM DIA Meter 12.00 41866
2100 MM DIA Meter 14.00 46766
2100 MM DIA Meter 16.00 51698
2100 MM DIA Meter 18.00 56629
2100 MM DIA Meter 20.00 61567
2100 MM DIA Meter 22.00 66519
2200 MM DIA Meter 8.00 32292

2200 MM DIA Meter 10.00 38478
2200 MM DIA Meter 12.00 43612
2200 MM DIA Meter 14.00 48752
2200 MM DIA Meter 16.00 53905
2200 MM DIA Meter 18.00 59064
2200 MM DIA Meter 20.00 64235
2200 MM DIA Meter 22.00 69418
285
Public Health Items
2300 MM DIA Meter 10.00 40255

2300 MM DIA Meter 12.00 45620
2300 MM DIA Meter 16.00 56369
2300 MM DIA Meter 18.00 61764
2300 MM DIA Meter 20.00 67166
2300 MM DIA Meter 22.00 72575
2400MM DIA Meter 10.00 41768

2400 MM DIA Meter 12.00 47364
2400 MM DIA Meter 14.00 53856
2400 MM DIA Meter 16.00 59471
2400 MM DIA Meter 18.00 65092
2400 MM DIA Meter 20.00 70725
2400 MM DIA Meter 22.00 77173
2500 MM DIA Meter 10.00 43548

2500 MM DIA Meter 14.00 55207
2500 MM DIA Meter 16.00 61051
2500 MM DIA Meter 18.00 66903
2500 MM DIA Meter 20.00 72766
2500 MM DIA Meter 22.00 78636
2600 MM DIA Meter 12.00 51115

2600 MM DIA Meter 14.00 57183
2600 MM DIA Meter 16.00 63259
2600 MM DIA Meter 18.00 69341
2600 MM DIA Meter 20.00 75435
286
Public Health Items
2600 MM DIA Meter 22.00 81535
2 Cost of Laying, Jointing, Hydrostatic filed test

pressure, including cost of site welding jointing
materials and cost of transportation of water
including emptying pipe line after completion
of filed testing
400 MM DIA Meter 372.00
The above rates of MS Spiral pipes are based on the following raw materials cost.
MS Plates = Rs 40,000/- Per MT.
The rates may be revised depending upon the increase/decrease in the cost of raw materials (landed price)
as per the following method.
Revised Cost = Cost as per the above table "R 1".
R1= Variation (Increase/Decrease) in cost (Rs. Per meter) due to change in cost of M.S/ Plates = (M2-M1)/1000 x
Wm
M1= Rs 40,000/-
M2=Cost of MS Plates (Rs. Per MT including all taxes and freight) at the time of preparation of estimate
Wm=Weight of MS Plates required (Kg) per meter of pipe
287
Public Health Items
15. S.S. RATES FOR GLASS FIBRE REINFORCED PLASTIC (GRP) PIPES
Sl.No. Description
1 2
GLASSFIBRE REINFORCED PLASTIC (GRP) PIPES CONFORMING TO IS 12709 - 1994 Stiffness class 124 Kpa
including transportation to any where in A.P. with jointing materials i.e., Reka couplings, Rubber Gaskets
1
etc., for jointing pipes including cost of specials, loading, un-loading and stacking etc., complete but
excluding Central Excise duty and to be added sale tax.
Size Unit S.S. Rates for 2010-11. Rs.
3 Bar 6 Bar 9 Bar 12 Bar 15 Bar
300 MM DIA Metre 2526 2595 2668 2739 2858
350 MM DIA Metre 2710 2749 2834 2912 3046
400 MM DIA Metre 3019 3153 3269 3421 3555
450 MM DIA Metre 3542 3678 3879 4070 4302
500 MM DIA Metre 4034 4197 4436 4715 4984
600 MM DIA Metre 5126 5339 5663 6240 6530
700 MM DIA Metre 6148 6427 7208 7862 8458
800 MM DIA Metre 7524 7880 8507 9255 9993
900 MM DIA Metre 9406 9806 10653 11554 12512
1000 MM DIA Metre 11273 11792 12684 13834 14911
Cost of laying jointing, testing to Hydrostatic field test pressure including cost of transportation of water
2
and emptying pipe line after completion of field testing.
Size Unit S.S. Rates for 2010-11. Rs.
3 Bar 6 Bar 9 Bar 12 Bar 15 Bar
300 MM DIA Metre 97.00 97.00 97.00 97.00 97.00
350 mm dia Metre 145.00 145.00 145.00 145.00 145.00
400 mm dia Metre 218.00 218.00 218.00 218.00 218.00
450 mm dia Metre 266.00 266.00 266.00 266.00 266.00
500 mm dia Metre 339.00 339.00 339.00 339.00 339.00
600 mm dia Metre 363.00 363.00 363.00 363.00 363.00
700 mm dia Metre 411.00 411.00 411.00 411.00 411.00
800 mm dia Metre 484.00 484.00 484.00 484.00 484.00
900 mm dia Metre 532.00 532.00 532.00 532.00 532.00
1000 mm dia Meter 617.00 617.00 617.00 617.00 617.00
Note:1) The material component is 50% of total cost.
2) The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.
3) The cost of other specials like tees, reducers etc with flange will be charge @4 times per meter cost of pipe.
4) The cost of other special like plain ended tees, reducers etc will be charge @ 2.50 times per meter cost
of pipe.
The methodology adopted for rates is as follows:
Percentage of raw materials in the finished product of the pipe
1) Hoop Glass Fibre Rovings H% (35%)
2) Chop Glass C% (40%) 3) Resin R% (25%)
The cost of variation in Raw materials are:
1) Variation in cost of Hoop Glass : h%
2) Variation in cost of Chop Glass : c%
3) Variation in cost of Resin : r%
The percentage of variation in cost of pipe allowed is
(H x h + C x c + R x r)/100
The above raw materials rates are obtained form the principal manufacturers.
The rates of raw materials are:
1) Hoop Glass Fibre Rovings - Rs.82.00/kg (Excluding CED&ST)
2) Chop Glass - Rs.102.00/kg (Excluding CED&ST)
3) Resin - Rs.95.00/kg (Excluding CED&ST)
288
Public Health Items
16. S.S. RATES FOR H.D.P.E PIPES FOR THE YEAR 2010-11. (PE - 80 Grade)
2.5 kg/ 4.0 kg/

Sl.No Description
sqcm sqcm
1 2 3 4
Manufacture, supply, & delivery of HDPE pipes conforming to IS
4984 - 1995 including transportation to any where in A.P, excluding
excise duty, sale tax and specials etc., complete. ( Supply upto 90
mm dia in coil & above 90 mm dia straight length in 6 M.)
Rate per Meter
OD 20 mm - -
OD 25 mm - -
OD 32 mm - -
OD 40 mm - 33.00
OD 50 mm - 48.00
OD 63 mm 43.00 66.00
OD 75 mm 67.00 91.00
OD 90 mm 90.00 131.00
OD 110 mm 126.00 195.00
OD 125 mm 159.00 252.00
OD 140 mm 207.00 311.00
OD 160 mm 268.00 407.00
OD 180 mm 333.00 514.00
OD 200 mm 409.00 629.00
OD 225 mm 533.00 822.00
OD 250 mm 657.00 1017.00
OD 280 mm 825.00 1268.00
OD 315 mm 1036.00 1611.00
OD 355 mm 1261.00 1947.00
OD 400 mm 1635.00 2523.00
OD 450 mm 2064.00 3205.00
OD 500 mm 2543.00 3939.00
OD 560 mm 3141.00 4861.00
OD 630 mm 3973.00 6148.00
OD 710 mm 5054.00 7813.00
OD 800 mm 6405.00 9890.00
OD 900 mm 8073.00 12531.00
OD 1000 mm 9952.00 15431.00
Note:
Excise duty, CST / VAT extra as applicable at the time of supply.
The IPCL resin cost adopted for the above rates are
For PE - 80 grade Rs.77,680/- per MT. (Excluding CED&ST)
The variation in cost of HDPE pipes due to increase / decrease in raw material cost shall be allowed as per the
following price variation formula.
price variation formula as follows:
P2 = P1 + (A2 - A1) /1000 x M x 0.95(for increase in raw material cost)
P2 = P1 - (A1 - A2) /1000 x M x 0.95(for decrease in raw material cost)
P2 = Revised pipe price in Rs. Per Meter excluding CED & ST
P1 = Existing pipe price in Rs. Per Meter excluding CED & ST
A2 = Revised price of raw material Rs. Per MT excluding CED & ST
A1 = Existing price of raw material Rs. Per MT excluding CED & ST
M = Weight of pipe in Kgs per Meter as per weight chart.
289
Public Health Items
17. S.S. RATES FOR H.D.P.E PIPES FOR THE YEAR 2010-11. (PE - 100 Grade)
6.0 kg/ 8.0 kg/ 10.0 kg/ 12.5 16.0

Sl.N
Description sqcm sqcm sqcm kg/ kg/
o
sqcm sqcm
1 2 3 4 5 6 7
I Manufacture, supply, & delivery of
HDPE pipes conforming to IS 4984 -
1995 including transportation to
any where in A.P,excluding excise
duty, sale tax and specials etc.,
complete. ( Supply upto 90 mm
dia in coil & above 90 mm dia
straight length in 6 M.)
Rate per Meter
OD 25 mm 32.00
OD 32 mm 34.00 45.00 53.00
OD 40 mm 44.00 52.00 68.00 82.00
OD 50 mm 54.00 67.00 81.00 106.00 127.00
OD 63 mm 81.00 103.00 125.00 167.00 200.00
OD 75 mm 115.00 146.00 176.00 238.00 284.00
OD 90 mm 164.00 209.00 250.00 338.00 410.00
OD 110 mm 246.00 312.00 372.00 508.00 609.00
OD 125 mm 314.00 402.00 482.00 652.00 786.00
OD 140 mm 394.00 503.00 604.00 820.00 986.00
OD 160 mm 515.00 655.00 787.00 1068.00 1284.00
OD 180 mm 648.00 830.00 995.00 1349.00 1625.00
OD 200 mm 802.00 1024.00 1227.00 1671.00 2001.00
OD 225 mm 1038.00 1326.00 1595.00 2106.00 2537.00
OD 250 mm 1278.00 1640.00 1969.00 2602.00 3126.00
OD 280 mm 1602.00 2052.00 2466.00 3271.00 3924.00
OD 315 mm 2031.00 2599.00 3120.00 4123.00 4961.00
OD 355 mm 2545.00 3251.00 3907.00 5244.00 6294.00
OD 400 mm 3359.00 4286.00 5138.00 6790.00 8146.00
OD 450 mm 4164.00 5334.00 6410.00 8582.00 10278.00
OD 500 mm 5148.00 6576.00 7904.00 10604.00 12657.00
OD 560 mm 5912.00 7555.00 9017.00 11687.00
OD 630 mm 7449.00 9559.00 11422.00 13698.00
OD 710 mm 9481.00 12112.00 14508.00
OD 800 mm 12032.00 15379.00 18486.00
OD 900 mm 15243.00 19469.00
OD 1000 mm 18796.00
Note:-
The variation in cost of HDPE pipes due to increase / decrease in raw material cost shall be allowed as per the
290
Public Health Items
18. S.S. RATES FOR H.D.P.E FITTINGS FOR THE YEAR 2010-11.
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including
transportation to any where in A.P, excluding excise duty, sale tax and specials etc.,
complete
I (a) PIPE ENDS LONG NECK Rate per Each
OD 50 mm 58.00
OD 63 mm 72.00
OD 75 mm 86.00
OD 90 mm 112.00
OD 110 mm 154.00
OD 125 mm 277.00
OD 140 mm 280.00
OD 160 mm 390.00
OD 180 mm 553.00
OD 200 mm 713.00
OD 225 mm 817.00
OD 250 mm 956.00
OD 280 mm 1070.00
OD 315 mm 1234.00
OD 355 mm 2577.00
OD 400 mm 3434.00
OD 450 mm 5714.00
OD 500 mm 6360.00
(b) MS FLANGES Rate per Each
OD 50 mm 103.00
OD 63 mm 132.00
OD 75 mm 165.00
OD 90 mm 177.00
OD 110 mm 187.00
OD 125 mm 257.00
OD 140 mm 278.00
OD 160 mm 365.00
OD 180 mm 516.00
OD 200 mm 668.00
OD 225 mm 835.00
OD 250 mm 986.00
OD 280 mm 1119.00
OD 315 mm 1317.00
OD 355 mm 2229.00
OD 400 mm 2765.00
OD 450 mm 3609.00
OD 500 mm 4134.00
(c) END CAPS Rate per Each
OD 50 mm 38.00
OD 63 mm 46.00
OD 75 mm 59.00
OD 90 mm 76.00
OD 110 mm 88.00
OD 125 mm 122.00
OD 140 mm 142.00
OD 160 mm 216.00
OD 180 mm 351.00
OD 200 mm 384.00
OD 225 mm 400.00
OD 250 mm 568.00
OD 280 mm 581.00
OD 315 mm 797.00
291
Public Health Items
OD 355 mm 1229.00
OD 400 mm 2146.00
OD 450 mm 3451.00
OD 500 mm 6360.00
(d) REDUCERS Rate per Each
OD 50 mm x 63 mm 53.00
OD 63 mm x 75 mm 77.00
OD 75 mm x 90 mm 126.00
OD 90 mm x 110 mm 174.00
OD 110 mm x 125 mm 265.00
OD 125 mm x 140 mm 366.00
OD 140 mm x 160 mm 511.00
OD 160 mm x 180 mm 709.00
OD 180 mm x 200 mm 915.00
OD 200 mm x 225 mm 1124.00
OD 225 mm x 250 mm 1531.00
OD 250 mm x 280 mm 2175.00
OD 280 mm x 315 mm 3075.00
OD 315 mm x 355 mm 3526.00
OD 355 mm x 400 mm 4977.00
OD 400 mm x 450 mm 5162.00
OD 450 mm x 500 mm 6221.00
(e) TEES Rate per Each
OD 50 mm 74.00
OD 63 mm 116.00
OD 75 mm 141.00
OD 90 mm 248.00
OD 110 mm 293.00
OD 125 mm 442.00
OD 140 mm 611.00
OD 160 mm 1051.00
OD 180 mm 1427.00
OD 200 mm 1964.00
OD 225 mm 2788.00
OD 250 mm 3817.00
OD 280 mm 5345.00
OD 315 mm 7619.00
OD 355 mm 10864.00
OD 400 mm 15911.00
OD 450 mm 22602.00
OD 500 mm 31040.00
(f) BENDS Rate per Each
OD 50 mm 46.00
OD 63 mm 103.00
OD 75 mm 133.00
OD 90 mm 229.00
OD 110 mm 302.00
OD 125 mm 445.00
OD 140 mm 586.00
OD 160 mm 874.00
OD 180 mm 1255.00
OD 200 mm 1701.00
OD 225 mm 2413.00
OD 250 mm 3308.00
OD 280 mm 4769.00
OD 315 mm 6595.00
OD 355 mm 9142.00
OD 400 mm 13789.00
292
Public Health Items
OD 450 mm 20273.00
OD 500 mm 27484.00
II Providing and fixing Electro fusion Ferrule Tapping Saddle confirming to prEN 12201-3,
Manufactured from virgin resin of PE-80/PE-100 having blue/black colour using food grade
compounded raw material with quality assurance certificate from quality agencies like
DVGMK/KIWA/SPGN/WRc etc. for usage in drinking water system and having working
pressure of 10 Bar. The cost shall include testing of all materials, labour all taxes (Central,
State and Municipal), inspection charges, transportation upto site, transit insurance, loading,
unloading, stacking, providing and fixing etc. complete as specified and directed
SIZE Rate Each Rs.
(Main pipe outer diameter in mm & Tapping size in Inches)
63x1/2” 799.20
63 x3/4” 799.20
63 x1” 799.20
63 x1/2” 799.20
75 x1/2” 799.20
75 x3/4” 799.20
75 x1 799.20
90 x1/2” 799.20
90 x3/4” 799.20
90 x1” 799.20
90 x 1 1/4” 1036.80
90 x 1 1/2” 1036.80
90 x2” 1036.80
110x1/2” 799.20
110 x3/4” 799.20
110 x1” 799.20
110 x 1 1/4” 1036.80
110x1 1/2” 1036.80
110x2” 1036.80
160 x1/2” 799.20
160 x3/4” 799.20
160 x1” 799.20
160 x 1 1/4” 1132.80
160 x 1 1/2” 1132.80
160 x 2” 1132.80
200 x 1/2” 1128.00
200 x 3/4” 1128.00
200 x 1” 1128.00
200 x 1 1/4” 1632.00
200 x 2” 1632.00
250 x 1/2” 1128.00
250 x3/4” 1128.00
250 x1” 1128.00
250 x 1 1/4” 1632.00
250 x1 1/2” 1632.00
250 x 2” 1632.00
315 x 1/2” 1344.00
315 x3/4” 1344.00
315x1” 1344.00
315x1 1/4” 1824.00
315x1 1/2” 1824.00
315x2” 1824.00
293
Public Health Items
19. S.S. RATES FOR PVC PIPES FOR THE YEAR 2010-11
TEST PRESSURE
Sl.
Description 2.5 2 2 2
No. 2 4.0 Kgs/cm 6 Kgs/cm 10 Kgs/cm
Kgs/cm
1 2 3 4 5 6
Manufacture, Supply and delivery of
Unplasticised PVCs Pipes for potable water
supplies conforming to IS : 4985/2000 (third
revision) with bell ends (Socket) as per
1 specification in light Grey/Natural Ivory
Grey/ Any other Color (except White)
inclusive of transportation to the sub-
divisional stores anywhere in AP excluding
Excise duty and Sales Tax etc.
DIA IN MM Rate/Metre Rs. Rs. Rs. Rs.
20 10.00
25 16.00
32 25.00
40 24.00 38.00
50 37.00 59.00
63 39.00 56.00 87.00
75 57.00 78.00 124.00
90 52.00 79.00 113.00 175.00
110 78.00 115.00 163.00 263.00
125 101.00 149.00 207.00 344.00
140 123.00 186.00 268.00 424.00
160 164.00 246.00 347.00 559.00
180 206.00 314.00 448.00 715.00
200 263.00 382.00 544.00 870.00
225 338.00 501.00 724.00 1153.00
250 410.00 585.00 897.00 1412.00
280 526.00 768.00 1131.00 1788.00
315 663.00 974.00 1421.00 2256.00
The resin cost adopted for the above rates is Rs.55,950/- per MT (Basic rate, excluding CED)
The variation in cost of PVC pipes due to increase / decrease in raw material cost shall be allowed subject to the
The price variation formula to be adopted is as follows:
P2 = P1 + (A2 - A1) /1000 x M x 0.95 (for increase in raw material cost)
P2 = P1 - (A1 - A2) /1000 x M x 0.95 (for decrease in raw material cost)
P2 = Revised pipe price in Rs. Per Metre
P1 = Existing pipe price in Rs. Per Metre
A2 = Revised price of raw material Rs. Per MT
A1 = Existing price of raw material Rs. Per MT
294
Public Health Items
20. S.S.RATES FOR NON- PRESSURE P.V.C.U PIPES FOR THE YEAR 2010-11
Code No Description
1 2 4
Manufacture, supply, & delivery of Unplasticized Non-Pressure S.S Rates
Polyvinyl Chloride(PVC-U) pipes of dark (any shade of Brown) 2010-11
for use in underground drainage & sewerage systemr
conforming to IS 15328/2003) with solvent cement jointing as
per specification inclusive of transportation to the Sub-
Divisional stores any where in A.P, excluding Central Excise
duty, Cess, & VAT etc.,
Rate per Meter Rs.
Pipe Series (S25)
OD 110 mm -
OD 125 mm -
OD 160 mm 215.00
OD 200 mm 327.00
OD 250mm 507.00
OD 315 mm 800.00
OD 400 mm(New Item) 1189.00
Pipe Series (S20)
OD 110 mm -
OD 125 mm 167.00
OD 160 mm 266.00
OD 200 mm 404.00
OD 250mm 631.00
OD 315 mm 990.00
Pipe Series (S16.5)
OD 110 mm 147.00
OD 125 mm 198.00
OD 160 mm 309.00
OD 200 mm 480.00
OD 250mm 745.00
OD 315 mm 1176.00
295
Public Health Items
21. S.S. RATES FOR NON- PRESSURE P.V.C.U PIPES FOR THE YEAR 2010-11
Code No Description
1 2 4
Manufacture, supply, & delivery of unplasticized Non-Pressure S.S Rates
Polyvinyl Chloride(PVC-U) pipes of dark (any shade of Brown) for use 2010-11
in underground drainage & sewerage systemr conforming to IS
15328/2003) with Elastomeric Seal Ring Joints (Ringtite PVC Pipes)as
per specification inclusive of transportation to the Sub-Divisional
stores any where in A.P, excluding Central Excise duty,Cess, & VAT
etc.,
Rate per Meter Rs.
Pipe Series (S25)
OD 110 mm -
OD 125 mm -
OD 160 mm 230.00
OD 200 mm 350.00
OD 250mm 543.00
OD 315 mm 855.00
Pipe Series (S20)
OD 110 mm -
OD 125 mm 180.00
OD 160 mm 284.00
OD 200 mm 430.00
OD 250mm 671.00
OD 315 mm 1053.00
Pipe Series (S16.5)
OD 110 mm 157.00
OD 125 mm 211.00
OD 160 mm 330.00
OD 200 mm 509.00
OD 250mm 791.00
OD 315 mm 1249.00
296
Public Health Items
22. S.S. RATES FOR CENTRIFUGALLY CAST (SPUN)IRON PRESSURE PIPES
Sl.
Description Unit S.S. Rates for 2010-11
No.
1 2 3 4 5 6
SOCKET AND SPIGOT CENTRIFUGALLY CAST (SPUN)
IRON PRESSURE PIPES FOR WATER, GAS AND SEWAGE
CONFORMING TO SPECIFICATION NO: I..S 1536/1989
I (THIRD REVISION) WITH Amdt. No: 1 & 2 IN STANDARD
B Class
LENGTHS OF 3.66 M, 4 M, 4.5M, 5 M, 5.5 M & 6 M AND LA Class (Rs) A Class (Rs)
(Rs)
DETAILS GIVEN BELOW, SUITABLE EITHER FOR LEAD
JOINTING OR RUBBER GASKET (PUSHON) JOINTING AT
PURCHASERS OPTION AT EX-FACTORY EXCLUDING
TRANSPORTATION, TAXES & DUTIES.
Nominal dia (in MM)
80 Rmt 742.00 805.00 865.00
100 Rmt 902.00 992.00 1059.00
125 Rmt 1137.00 1242.00 1337.00
150 Rmt 1376.00 1507.00 1623.00
200 Rmt 2009.00 2180.00 2358.00
250 Rmt 2706.00 2947.00 3188.00
300 Rmt 3490.00 3816.00 4133.00
350 Rmt 4466.00 4844.00 5254.00
400 Rmt 5436.00 5941.00 6412.00
450 Rmt 6579.00 7228.00 7796.00
500 Rmt 7784.00 8478.00 9173.00
600 Rmt 10290.00 11234.00 12168.00
700 Rmt 13554.00 14808.00 15999.00
750 Rmt 15181.00 16597.00 18005.00
800 Rmt 16993.00 18515.00 20028.00
900 Rmt 20708.00 25956.00 24482.00
1000 Rmt 24878.00 27176.00 29373.00
Conveyance of Centrifugally Cast (Spun) Iron Pressure
Pipes and accessories including loading at Factory, un-
loading at site and stacking for the following sizes. (The Class
Minimum distance/lead in Km for destination below
100 Km to be taken as 100 Km)
SIZE IN MM UNIT LA A B
100 Per KM/RMT 0.20 0.20 0.20
125 Per KM/RMT 0.30 0.30 0.30
150 Per KM/RMT 0.30 0.30 0.30
200 Per KM/RMT 0.50 0.50 0.50
250 Per KM/RMT 0.60 0.60 0.60
300 Per KM/RMT 0.80 0.90 0.90
350 Per KM/RMT 1.10 1.10 1.20
400 Per KM/RMT 1.30 1.30 1.40
450 Per KM/RMT 1.50 1.60 1.70
500 Per KM/RMT 1.80 1.90 2.00
600 Per KM/RMT 1.70 1.80 1.90
700 Per KM/RMT 1.80 1.90 2.00
750 Per KM/RMT 3.00 3.20 3.40
800 Per KM/RMT 5.10 5.10 5.10
900 Per KM/RMT 5.10 5.10 5.10
1000 Per KM/RMT 5.10 5.10 5.10
Note:The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.
Price Variation Formula due to Increase / Decrease in the cost of pig iron.
297
Public Health Items
P2=P1+ (R2-R1)/1000*M*1.0
Where
M= Weight of pipe in kg per metre.
P2 = Revised rate of pipe in Rs. per Rmt.
P1 = Rate of pipe in Rs. per Rmt. as per above table.
R2 = Price of Pig Iron(Rs per MT excluding CED&ST)) at the time of preparation of estimate.
R1 = Price of Pig Iron(Rs per MT excluding CED&ST) at the time of preparation of SOR =Rs. 25,000/-
23.S.S. RATES FOR DUCTILE IRON PRESSURE PIPES

Sl. S.S. Rate for
Description Unit
No. 2010-11
1 2 3 4 5
CENTRIFUGALLY CAST (SPUN) DUCTILE IRON
PRESSURE PIPES FOR WATER, GAS AND SEWAGE WITH
SOCKET SPIGOT ENDS CONFORMING TO I.S.:
8329/2000 IN STANDARD WORKING LENGTHS OF 4, 5
5.5 & 6 METER FOR CLASSIFICATION K9 & K7 SUITABLE
1
FOR PUSH-ON-JOINT (RUBBER GASKET D JOINTING)
WITH CEMENT MORTAR LINING INSIDE THE PIPES
WITH OUTSIDE ZINC COATING. RATES ARE EX-
FACTORY, EXCLUDING TRANSPORTATION, TAXES &
DUTIES.
Nominal Dia in mm Rmt K9 K7
100 Rmt 997.00 887.00
150 Rmt 1474.00 1194.00
200 Rmt 1967.00 1711.00
250 Rmt 2581.00 2296.00
300 Rmt 3269.00 2951.00
350 Rmt 4075.00 3713.00
400 Rmt 4914.00 4508.00
450 Rmt 5880.00 5424.00
500 Rmt 6840.00 6466.00
600 Rmt 9021.00 8604.00
700 Rmt 11667.00 11137.00
750 Rmt 13092.00 12479.00
800 Rmt 14445.00 13788.00
900 Rmt 17619.00 16824.00
1000 Rmt 20884.00 19940.00
PRESSURE PIPES FOR WATER, GAS AND SEWAGE WITH
PLAIN ENDS CONFORMING TO I.S.: 8329/2000 IN
STANDARD WORKING LENGTHS OF 4, 5, 5.5 & 6
2
METER FOR CLASSIFICATION K9 & K7 WITH CEMENT
MORTAR LINING INSIDE THE PIPES WITH OUTSIDE
ZINC COATING. RATES ARE EX-FACTORY, EXCLUDING
TRANSPORTATION, TAXES & DUTIES.
Nominal Dia in mm K9 K7
100 Rmt 916.00 755.00
150 Rmt 1342.00 1086.00
200 Rmt 1825.00 1546.00
250 Rmt 2422.00 2010.00
300 Rmt 3065.00 2648.00
350 Rmt 3808.00 3326.00
400 Rmt 4590.00 4027.00
450 Rmt 5424.00 4824.00
500 Rmt 6480.00 5743.00
298
Public Health Items
600 Rmt 8358.00 7608.00
700 Rmt 10603.00 10082.00
750 Rmt 11880.00 11278.00
800 Rmt 13116.00 12471.00
900 Rmt 15861.00 15080.00
1000 Rmt 18855.00 17928.00
PRESSURE PIES WITH FLANGED (WELDED) ENDS FOR
WATER, GAS, SEWAGE CONFORMING TO I.S.:
8329/2000 IN STANDARD WORKING LENGTHS
3
OF1,2,3, 4, 5 Mts FOR CLASSIFICATION K9 WITH
CEMENT MORTAR LINING INSIDE THE PIPES WITH
OUTSIDE ZINC COATING. RATES ARE EX-FACTORY,
EXCLUDING TRANSPORTATION, TAXES & DUTIES.
1.0 Mt. 2.0 Mt.
Nominal Dia in mm
Length Length
100 Each 3570.00 4635.00
150 Each 5043.00 6592.00
200 Each 6665.00 8776.00
250 Each 8700.00 11517.00
300 Each 10871.00 14427.00
350 Each 17040.00 21458.00
400 Each 21145.00 26484.00
450 Each 25539.00 31836.00
500 Each 30927.00 38322.00
600 Each 43781.00 53508.00
700 Each 52220.00 64562.00
800 Each 64374.00 79640.00
900 Each 76717.00 95176.00
1000 Each 98466.00 120409.00
3.0 Mt. 4.0 Mt.
Length Length
100 Each 5701.00 6233.00
150 Each 8142.00 9031.00
200 Each 10890.00 12239.00
250 Each 14334.00 16167.00
300 Each 17981.00 20396.00
350 Each 25878.00 28327.00
400 Each 31822.00 34362.00
450 Each 38131.00 41040.00
500 Each 45719.00 49051.00
600 Each 63231.00 67179.00
700 Each 76904.00 82263.00
800 Each 94903.00 101612.00
900 Each 113636.00 121951.00
1000 Each 142352.00 151191.00
5.0 Mt.
Length
100 Each 7275.00
150 Each 10569.00
200 Each 14351.00
250 Each 18980.00
300 Each 23959.00
350 Each 32744.00
400 Each 39693.00
450 Each 47332.00
299
Public Health Items
500 Each 56433.00
600 Each 76882.00
700 Each 94581.00
800 Each 116846.00
900 Each 144576.00
1000 Each 173091.00
Conveyance of Ductile Iron Pressure Pipes and
WELDED
accessories including loading at Factory, un-loading at
DOUBLE
4 site and stacking for the following sizes. (The Minimum Class
FLANGED
distance/lead in Km for destination below 100 Km to be
PIPES
taken as 100 Km)
SIZE IN MM UNIT K7 K9 K9
100 Per KM/RMT 0.20 0.20 0.30
150 Per KM/RMT 0.30 0.30 0.40
200 Per KM/RMT 0.30 0.40 0.60
250 Per KM/RMT 0.40 0.50 0.80
300 Per KM/RMT 0.60 0.60 1.00
350 Per KM/RMT 0.70 0.80 1.20
400 Per KM/RMT 0.80 0.90 1.40
450 Per KM/RMT 1.00 1.10 1.70
500 Per KM/RMT 1.20 1.30 2.00
600 Per KM/RMT 1.70 1.70 2.60
700 Per KM/RMT 2.50 2.50 3.80
750 Per KM/RMT 3.00 3.00 4.60
800 Per KM/RMT 5.10 5.10 7.60
900 Per KM/RMT 5.10 5.10 7.60
1000 Per KM/RMT 5.10 5.10 7.60
Price Variation Formula due to Increase / Decrease in the cost of pig iron.
P2=P1+ (R2-R1)/1000*M*0.96, Where
M = Weight of pipe in kg per metre as per I.S.8329-2000.
P2 = Revised rate of pipe in Rs. per Rmt.
P1 = Rate of pipe in Rs. per Rmt. as per above table.
R2 = Price of Pig Iron(Rs per MT excluding CED&ST)) at the time of
preparation of estimate.
R1 = Price of Pig Iron(Rs per MT excluding CED&ST) at the time of preparation
of SOR =Rs.25,000
300
Public Health Items
24. S.S. RATES FOR DUCTILE IRON FITTINGS

1 2 3
CENTRIFUGALLY CAST (SPUN) DUCTILE IRON FITTINGS CONFORMING TO IS:9523/2000 HAVING
DIMENTIONS AS PER TABLE. THE RATES MENTIONED HERE UNDER ARE FOR FITTINGS, ZINC
COATED EXTERNALLY WITH INSIDE MORTAR LINING (WITH FINISHING AS PER CLASS 13/IS
9523/2000) ( Ex-works) Excluding transportation, taxes and duties etc.
I DI double socket branch flange Tee
Upto 500 x 500 mm dia Kg 90.00
Above 500 x 500 mm dia Kg 100.00
II DI All Socket Tees

III DI Double socket Tapers (Reducer)

IV DI Flanged Socket
Upto 500 mm dia Kg 90.00
Above 500 mm dia Kg 100.00
V DI Flanged Spigot
VI DI Double Socket Duck Foot Bend

Upto 300mm dia Kg 90.00
Above 300mm dia Kg 100.00
VII DI Double Flange Duck Foot bend

VIII DI All socket Cross.

IX DI All Flange Tee

X DI All Flange Cross

XI DI Double Flange Reducer

XII Blank Flange
301
Public Health Items

XIII Mechanical Joints

XIV DI Double Socket Bends

XV DI Double Flanged Bends

Price of Pig Iron(Rs per MT excluding CED&ST) at the time of preparation.

of SOR =Rs. 25,000/-
302
Public Health Items
25. S.S. RATES FOR RUBBER GASKETS SUITABLE FOR

C.I/ D.I. S/S PIPES
Sl. S.S Rates For

Description Unit
No. 2010-11
1 2 3 4
MANUFACTURE AS PER BIS 12820/89 WITH S.B.R. QUALITY RUBBER
CONFIRMING TO BIS: 5382/85, SUPPLY AND DELIVERY OF RUBBER GASKETS
SUITABLE FOR C.I/ D.I. S/S PIPES ANYWHERE IN A.P. F.O.R. DESTINATION
DEPARTMENTAL STORES INCLUDING COST OF MATERIAL, LOADING,
1
INCIDENTAL HANDLING WITH COMPANYS STANDARD PACKING,
TRANSPORTATION, UNLOADING & STACKING BUT EXCLUDING CENTRAL
EXCISE DUTY, SALES TAX, OCTROI AND OTHER GOVT. LEVIES ETC.,
COMPLETE.
80mm dia Each 43.00
100mm dia Each 67.00
1000mm dia Each 1152.00
26. RATES FOR CI PIPES AND SPECIALS
Rate/ Kg
including packing,
forwarding, transit
Sl. Quality or
Description risk and delivery any
No. sort
where in A.P. for the
year 2010-11.
Rs.
1 2 3 4
MANUFACTURE, SUPPLY AND DELIVERY OF CAST IRON PIPES AND I.S. No.
FITTINGS (Spls.) CONFORMING TO I.S. No. 7181/1986, 5531/1988, 7181/1986
3950/1979 AND C.I.D. JOINTS CONFIRMING TO IS No.8794/1988 AT 5531/1988
56.00
SITE OF WORK ANYWHERE IN A.P. INCLUDING, LOADING, UNLOADING, 3950/1979
TRANSPORTATION TO SITE OF WORK STACKING AT SITE TRANSIT RISK &
AND PACKAGE, EXCLUDING TAXES AND DUTIES. 8794/1988
Foot Note: The rate of CI pipes, CI Specials and CID Joints etc., which are to be incorporated in the SOR are
based on the following raw materials cost.
Pig Iron: Rs.25,000.00/- per M.T.(excluding CED, Tax & Fright)
303
Public Health Items
Coke : Rs.29,100.00/- per M.T. .(Excluding CED, Tax & Fright)

The rates may be revised depending upon the increase/decrease in the cost of raw materials as per the
following method. For every increase/decrease of Rs.1000/- in the cost of raw materials or part there of
proportionately.
In respect of Pig Iron: The increase/decrease in cost of CI Specials per Kg is 3.43%.
In respect of coke: The increase/decrease in cost of CI Specials per Kg is 0.67%.
The above price is at site of work , Excise duty, CST/VAT extra as applicable at the time of supply.
27. RATES FOR C.I. D/F VALVES

Rate Each in Rs.
Sl.No. Description Rs. Rs. Rs.
1 2 3 4 5
Manufacture, Supply and delivery of CI D/F Sluice
valves conforming to IS 14846/2000 with
amendments No. 1&2 heavy duty with CI grade FG
260 as per IS: 210. Two coats of primer suitable for
EPOXY PAINTS finish shall be applied to all metal
1 surface and finally two coats of Epoxy Paint. The
Valves shall be tested for (closed end Test) against
Hydrostatic test requirement. The rates are
excluding transportation, Central Excise duty and
sale tax etc., The operation can be done with
handwheel/cap. ISI Marked.
DIA IN MM Rate/Each PN-1.0 PN-1.6
50 3,822 4,586
65 4,223 5,068
80 4,468 5,360
100 5,957 7,147
125 7,445 8,934
150 8,934 10,721
200 15,660 18,472
250 22,149 26,612
300 30,404 35,109
Manufacture, Supply and delivery of CI D/F Sluice
valves Non-rising stem conforming to IS
14846/2000 with amendments No. 1&2 heavy duty
with CI grade FG 260 as per IS: 210 . Two coats of
primer suitable for EPOXY PAINTS finish shall be
applied to all metal surface and finally two coats of
2
Epoxy Paint. The Valves shall be tested for (closed
end Test) against Hydrostatic test requirement. The
rates are excluding transportation, Central Excise
duty and sale tax etc., including the cost for
enclosed Spur Gear Arrangement with thrust
bearing for easy operation. ISI Marked.
DIA IN MM Rate/Each Rs. Rs.
350 68,369 75,210
400 81,043 94,025
450 1,01,760 1,18,032
500 1,16,742 1,35,626
600 1,70,994 2,01,095
700 2,83,183
750 3,97,896
800 4,63,964
900 5,51,258
1000 8,51,760
1100 9,62,325
304
Public Health Items
1200 11,46,600
By Pass arrangement extra @ 7.5% for above
Note:
500mm dia. Valves.
Manufacture, Supply and delivery of CI D/F Non
Return Valve Heavy Duty Round Body conforming to
3
IS 5312/Part1/1984. Excluding transportation,
Central Excise duty and sale tax etc., complete.
DIA IN MM Rate/Each P.N 0.6 PN-1.0 PN-1.6
50 2,348
65 2,935
80 3,523
100 4,696
125 5,870
150 7,043 8,803
200 14,049 17,561
250 20,375 25,471
300 30,655 38,317
350 42,174 51,771
400 53,890 67,356
450 90,771 1,13,471
500 1,09,492 1,36,873
600 1,74,929 2,18,668
Manufacture, Supply and delivery of CI D/F Kinetic
Air Valve Heavy Duty suitable for working pressure
4 up to 16kg/Cm2 without isolating valve,
conforming to IS 14845 excluding transportation, NEW ITEM
Central Excise duty and sale tax etc., complete.
DIA IN MM Rate/Each PN-1.0 PN-1.6
40 2,770 3,034
50 3,347 3,666
80 4,477 5,504
100 6,000 6,571
150 13,517 14,804
200 22,383 24,515
Manufacture, Supply and delivery of CI D/F Kinetic
Air Valve as per IS:14845 Heavy Duty with isolating
5 valve bevel gear operated as per IS 14846 excluding
transportation, Central Excise duty and sales tax
etc., complete.
DIA IN MM Rate/Each PIN 1.0 PIN 1.6
40 7,881 9,065
50 9,197 10,578
80 12,116 13,928
100 16,689 19,202
150 32,883 37,828
200 49,036 56,396
Conveyance of valves and accessories including
6 loading at factory and unloading, stacking at site of 10% on basic cost of valves
work.
Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate. For
FG 260, Grade of CI shall be certified by reputed 3rd Party Quality Control Agency (as approved by indenting
authority) at the cost of the supplier.
305
Public Health Items
28. S.S RATES FOR C.I. D/F SOFT SEATED GATE / SLUICE VALVES
Sl. No. Description PN-1.0 PN-1.6

1 2 3 4
Manufacture, supply and delivery of CI D/F Gate (Sluice) Valve
(Soft Seated) according to standards of BS5163 – 86 type B,
also available as per DIN 3352 Part-4/AWWA C509/ISO5752
with body bonnet of Cast Iron of grade FG 260 as per IS 210-
1978 wedge fully rubber lined with EPDM Food grade Quality
and seals of NBR and the valves should be of vaccum tight and
1
100% Leak proof with Face to face dimensions as per IS:
14846-2000. Flanges of the valve is according to IS1538-
93(Table 6) All the valves should be with Electrostatic powder
coating both inside and outside with pocket less body
passage, excluding transportation, Central Excise duty and
sale tax etc., complete.
DIA IN MM Rate/Each Rs. Rs.
50
4,704.00 5,173.00
80
6,024.00 6,626.00
100
7,958.00 8,754.00
150
13,016.00 14,316.00
200
20,975.00 23,072.00
250
28,802.00 31,682.00
300
48,720.00 53,591.00
350
1,48,785.00 1,61,070.00
400
1,61,070.00 1,73,355.00
450
2,05,065.00 2,13,570.00
500
2,13,570.00 2,22,075.00
600
2,64,600.00 2,90,115.00
Conveyance of valves and accessories including loading at 10% on basic cost of valves
2
factory and unloading, stacking at site of work.
Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate. For
FG 260, Grade of CI shall be certified by reputed 3rd Party Quality Control Agency (as approved by indenting
authority) at the cost of the supplier
306
Public Health Items
29. S.S.RATES FOR C.I. BUTTERFLY VALVES.
Sl.
Description TEST PRESSURES
No.
1 2 3 4
Manufacture, Supply and delivery of CI
Wafer Lug type Butterfly Valves
conforming to IS 13095/1991
1 (Reaffirmed 1998) excluding PN-1.0 PN-1.6
transportation, CED and taxes etc.,
complete. Operation done with worm
actuator ISI marked Rate at Ex-Factory.
DIA IN MM Rate / Each Rs. Rs.
40 2,397.00 2,894.00
50 2,607.00 3,145.00
65 3,067.00 3,764.00
80 3,812.00 4,601.00
100 5,088.00 6,441.00
125 6,364.00 8,030.00
150 7,631.00 9,703.00
200 11,849.00 16,729.00
250 17,007.00 26,486.00
300 26,207.00 34,851.00
350 35,129.00 48,024.00
400 42,797.00 58,534.00
450 55,064.00 75,207.00
500 74,162.00 1,01,303.00
600 1,08,036.00 1,25,544.00
700 1,57,523.00 1,88,635.00
800 2,16,281.00 2,36,981.00
900 2,68,486.00 2,95,530.00
1000 3,28,149.00 3,81,957.00
1100 3,87,812.00 5,01,842.00
1200 4,48,870.00 5,91,059.00
Wafer type Butterfly Valves
conforming to IS 13095/1991 excluding
2 transportation, CED and taxes etc., PN-1.0 PN-1.6
complete. Operation without worm
actuator.( ISI marked) Rate at Ex-
Factory.
DIA IN MM Rate / Each

80 2,557.00 2,921.00
100 3,486.00 3,985.00
125 4,791.00 5,477.00
150 5,375.00 6,143.00
200 14,813.00 16,929.00
250 23,518.00 26,877.00
300 30,982.00 35,408.00
D/F Butterfly Valves manually gear
3 operated conforming to IS 13095/1991 PN-1.0 PN-1.6
excluding transportation, CED and
taxes etc., complete. ISI marked Rate
307
Public Health Items
at Ex-Factory.
DIA IN MM Rate / Each
300 36,722.00 41,969.00
350 56,822.00 64,939.00
400 68,033.00 77,751.00
450 79,489.00 90,845.00
500 93,736.00 1,07,127.00
600 1,10,343.00 1,26,107.00
700 1,65,613.00 1,89,272.00
750 1,95,200.00 2,23,085.00
800 2,07,905.00 2,37,607.00
900 2,59,760.00 2,96,868.00
1000 3,34,565.00 3,82,360.00
1100 4,41,591.00 5,04,674.00
1200 5,18,251.00 5,92,286.00
1300 7,31,853.00 8,36,404.00
1400 8,29,922.00 9,48,482.00
1500 9,46,920.00 10,82,195.00
1600 12,30,294.00 14,06,050.00
1800 13,98,328.00 15,98,088.00
2000 18,83,693.00 21,52,792.00
NOTE All the prices are ex-factory. Excise duty and CST / Local Tax extra as applicable at the time of
supply. Packing and transportation extra at 10% on basic cost.
The duties and taxes as applicable shall be added as per rules at the time of preparation of
estimate.
30. S.S RATES FOR WATER HAMMER CONTROL DEVICES

(Rate Each in Rs.)
TEST PRESSURE
Additional
Sl. charges for
Description 10 15 20 25
No. 2 2 2 2 Flanged
Kgs/cm Kgs/cm Kgs/cm Kgs/cm
ended
valves
1 2 3 4 5 6 7
Manufacture, Supply and delivery of zero
velocity valve/ PSLV with CI body with
1 flanged ends as per AWWA, Ex-factory
excluding transportation, Central Excise
duty and sale tax etc., complete.
DIA IN MM Rate/Each Rs. Rs. Rs. Rs.
150 63,742 74,405 78,801 86,683
200 66,591 76,579 82,324 90,554
250 75,133 86,403 92,884 1,02,172
300 84,553 97,236 1,04,531 1,14,982
Manufacture, Supply and delivery of zero
velocity valve/ PSLV with MS Fabricated
2 Body with Plain ends. as per AWWA, Ex-
factory excluding transportation, Central
Excise duty and sale tax etc.,Complete
DIA IN MM Rate/ Each Rs. Rs. Rs. Rs. Rs.
350 90,057 1,03,565 1,11,332 1,22,465 7,803
400 99,545 1,14,475 1,23,061 1,35,372 9,409
450 1,15,778 1,33,146 1,43,131 1,57,445 11,244
308
Public Health Items
500 1,33,810 1,53,880 1,65,422 1,81,965 12,163

525/550 1,43,728 1,63,390 1,79,953 1,97,949 15,719
600 1,60,928 1,85,066 1,98,946 2,18,841 22,424
650 1,80,140 1,98,156 2,25,234 2,43,134 25,358
700 2,09,974 2,31,086 2,62,525 2,83,522 30,291
750 2,32,577 2,55,868 2,90,750 3,14,042 34,009
800 2,83,320 3,25,820 3,50,254 3,85,277 38,323
900 3,36,744 3,87,255 4,08,472 4,57,930 46,355
1000 4,08,472 4,08,472 4,08,472 5,67,617 58,861
1050 4,12,557 4,12,557 4,12,557 5,97,655 61,216
1100 5,20,412 5,90,106 6,43,375 7,07,714 68,156
1200 6,26,363 6,89,013 7,84,933 8,45,631 77,105
1400 9,39,545 10,33,517 11,77,400 12,68,444 1,08,429
1500 10,94,730 12,04,192 13,68,382 14,77,731 1,10,598
1600 11,16,624 12,28,274 13,95,750 15,07,284 1,15,658
Manufacture, Supply and delivery of Air
Cushion valves / Quick Released damped
3 Air Valves (QRDA) as per AWWA, Ex-
factory excluding transportation, Central
Excise duty and sale tax etc., complete.
DIA IN MM Rate/Each Rs. Rs. Rs. Rs.
100 58,289 67,033 73,735 81,106
150 88,580 1,01,867 1,12,052 1,23,258
200 94,546 1,08,727 1,19,601 1,31,560
Conveyance of valves and accessories
4 including loading at factory and unloading, 10% on basic cost of valves
stacking at site of work.
31. RATES FOR CAST STEEL VALVES FOR THE YEAR 2010-11.
Sl.No. Description TEST PRESSURES

1 2 3 4 5 6
Cast Carbon Steel rising / Non rising
spindle sluice valve design standard as
per IS:14846/2000 for Water Supply
Scheme with SS Spindle & SS Working
Class-300
parts the grade of Cast Steel for body Class-150
Body 1100
Bonnet, Dome, Stool Cover, Wedge, Body 425PSI FOR Enclosed Spur Gear
1 PSI Seat
Stuffing Box, Gland Thrust Plate, shall Seat 300 PSI Arrangement.
750 PSI
be as per IS : 1030 / 1989. (The valve PN-20
PN-30
shall be used for High pressure
schemes & pumping stations)
excluding transportation, Central
Excise duty and sale tax etc.,
complete. ISI Marked
Rate/Each Class 150 Class 300
DIA IN MM Rs. Rs. Rs.
40 5,196.00 10,392.00
50 8,562.00 15,588.00
65 10,715.00 19,485.00
309
Public Health Items
80 12,851.00 23,382.00
100 17,140.00 31,175.00
125 21,982.00 39,969.00
150 25,718.00 46,763.00
200 41,536.00 84,434.00 50,837.00 92,888.00
250 58,462.00 1,32,895.00 67,762.00 141,350.00
300 73,850.00 1,67,868.00 83,150.00 176,322.00
350 98,476.00 2,23,824.00 1,11,158.00 235,353.00
400 2,00,043.00 4,54,642.00 2,12,725.00 466,171.00
450 2,24,223.00 4,99,607.00 2,36,906.00 511,136.00
500 2,63,792.00 5,99,528.00 2,76,474.00 611,057.00
600 3,01,162.00 6,83,462.00 3,13,845.00 694,991.00
700 5,82,541.00 5,95,223.00
750 6,26,506.00 6,44,261.00
800 7,25,428.00 7,43,183.00
900 8,57,325.00 8,75,080.00
1000 10,99,134.00 11,16,889.00
1100 11,87,065.00 12,04,820.00
1200 13,40,943.00 13,58,698.00

Cast Carbon Steel Bolted Cover Non
Return Valve as per IS : 5312 / Part1 /
1984. Round body heavy duty material
2 spec. As per IS:1030/1989 with SS
Hinge & Seat Rings. excluding
transportation, Central Excise duty and
sale tax etc., complete
DIA IN MM Rate/Each PN-20 PN-30

Rs.
40 5,166.00 9,393.00
50 7,687.00 13,989.00
65 9,607.00 17,487.00
80 11,529.00 20,984.00
100 15,818.00 27,979.00
125 19,785.00 35,972.00
150 21,753.00 39,569.00
200 32,974.00 71,943.00
250 46,164.00 119,906.00
300 65,948.00 149,882.00
350 87,931.00 199,843.00
400 180,258.00 409,677.00
450 202,241.00 459,638.00
500 237,413.00 539,575.00
600 274,783.00 624,507.00

Cast Steel Multi Door Type Non return
Valve as per IS; 5312/ Part II / 1984
Heavy duty material spec. as per PN-20
3
1030/1989 with SS hinges & Seat Rings
excluding transportation, Central Excise
duty and sale tax etc., complete.
310
Public Health Items
Rate/Each
DIA IN MM Rs.
500 3,99,685.00
600 4,99,607.00
700 5,99,528.00
750 7,39,418.00
800 10,99,134.00
900 13,18,961.00
1000 14,38,866.00
1100 16,98,662.00
1200 17,18,646.00
Cast Steel D/F Butter fly Valves
conforming to IS; 13095/1991 manually
4 heavy duty Gear operation, excluding
transportation, Central Excise duty and
sale tax etc., complete.
DIA IN MM PN-1.0/1.6 PN-2.5

Rat
e/Each
300 76,285.00 95,095.00
350 1,02,619.00 1,28,953.00
400 1,23,310.00 1,59,885.00
450 1,49,435.00 1,89,145.00
500 1,70,335.00 2,17,360.00
600 1,98,550.00 2,54,980.00
700 3,11,410.00 3,86,650.00
750 3,86,650.00 4,80,700.00
800 4,24,270.00 5,27,725.00
900 4,80,700.00 6,02,965.00
1000 7,62,850.00 9,50,950.00
1100 9,50,950.00 12,33,100.00
1200 11,39,050.00 12,33,100.00
1300 15,25,700.00 17,03,350.00
1400 16,09,300.00 17,97,400.00
1500 17,03,350.00 18,91,450.00
1600 19,85,500.00 22,67,650.00
1800 24,55,750.00 26,43,850.00
2000 33,96,250.00 36,78,400.00
Conveyance of valves and accessories
5 including loading at factory and 10% on basic cost of valves
unloading, stacking at site of work.
Note : The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.
311
Public Health Items
32. S S RATES FOR DI D/F VALVES FOR THE YEAR 2010-11.

Rate/Each in Rs.
Sl. TEST PRESSURE
Description
No. PN 10 PN 16
1 2 3 4 5 6
Manufacture, supply and delivery of Single Chamber DI
Air Valve with Body and cover in Ductile Iron of grade SG
400/12 or equivalent grade as per I.S.3896-part2-1985
and subsequent revisions. All internal parts such as float,
1
shell etc., all cover bolts, of stainless steel, and Gaskets
and seals of EPDM food grade quality.S Epoxy powder
coating (EP-P) inside and outside colour blue. Drilled as
per IS:1538.
DIA IN MM PN 10 PN 16 PN 25
50 25,473 25,473 32,775
80 33,983 33,983 33,983
100 39,675 39,675 45,626
150 48,300 48,300 55,200
200 52,900 52,900 61,525
Manufacture, Supply and delivery of DI D/F Gate Valves
(Soft Seated) Resilient seated soft sealing gate valves
(Sluice valves) with body bonnet of ductile cast iron of
grade GGG40/ SG 400/12 or equivalent grade as per
I.S.3896-part2-1985 and subsequent revisions, wedge
fully rubber lined with EPDM food grade quality and
2
seals of NBR and the valves should be of vacuum tight
and 100% leak proof with face to face dimensions as per
BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves
should be with Electrostatic powder coating both inside
and outside pocket less body passage. Drilled as per
IS:1538.
50 6,098 6,098 10,306
80 7,809 7,809 12,706
100 10,301 10,301 14,407
150 16,220 16,220 24,030
200 26,954 26,954 40,532
250 37,331 37,331 60,203
300 56,420 56,420 97,650
350 1,70,823 1,70,823 2,85,755
400 1,79,166 1,79,166 2,90,653
450 With By-pass & Gear 3,08,243 3,08,243 5,79,405
500 With By-pass & Gear 3,27,334 3,27,334 6,15,289
600 With By-pass & Gear 4,21,512 4,21,512 7,92,315
Manufacture, Supply and delivery of DI D/F Butterfly
Valves with GGG40/SG 400/12 or Equivalent grade as per
I.S.3896-part 2-1985 and subsequent revisions, Double
eccentrically Disc., with renewable soft seal on the disc
and Body seat face of stainless steel / nickel weld
3
overlay, with powder or liquid Epoxy coating with
minimum thickness of 250 microns applied on both body
and disc inside and outside. Face to face dimensions as
per AWWA C 504 or BS 5155-long body or IS:13095 long
body. Drilled as per IS: 1538/ISO
312
Public Health Items
DIA IN MM PN 10 PN 16 PN 25 PN 40
150 65,006 65,006 67,104 89,089
200 70,802 73,100 85,891 1,08,326
250 82,494 84,892 99,432 1,51,796
300 98,433 1,01,331 1,13,023 1,59,391
350 1,12,623 1,22,866 1,43,102 1,73,482
400 1,41,850 1,60,710 1,87,113 2,65,227
450 1,55,726 1,72,835 2,20,118
500 1,57,207 1,85,564 2,95,084 3,27,750
600 2,06,041 2,90,909 3,42,502 3,59,127
700 4,06,760 4,29,196 6,45,064
800 4,40,977 4,59,560 9,41,495
900 5,76,712 5,76,712
1000 7,22,935 7,22,935 13,65,228
1100 8,31,375 _
1200 9,68,651 9,68,651 15,25,131
1400 20,81,819 20,81,819
1600 24,82,376 24,82,376
1800 30,44,778 30,44,778
2000 52,01,268 52,01,268
2200 75,09,052 75,09,052
Manufacture, Supply and delivery of DI D/F Swing
Check Valves Slanted/Straight seated with metallic,
corrosion proof and wear resistant seat faces/resilient
seat, Body and Disc of ductile cast iron GGG 40/SG Iron
4 420/12 or equivalent grade as per IS 3896(part2)-1985
and subsequent revisions. All the inside and outside of
the body is to be coated with double coating of epoxy
liquid. Drilled as per IS:1538. Specification and
Dimensions as per I.S 5312 or equivalent codes.
DIA IN MM PN 10 PN 16 PN 25 PN 40
100 25,758 28,620
150 43,254 48,060
200 65,594 69,496 1,01,922 1,33,407
250 72,187 76,559 1,23,786 1,56,415
300 90,485 95,867 1,50,696 1,90,926
350 1,06,497 1,12,887 1,71,417 2,08,418
400 1,29,370 1,37,106 1,73,570 2,25,708
500 1,64,488 1,74,445 2,19,989 2,89,485
600 2,46,790 2,61,625 3,24,300 4,19,175
700 3,56,213 3,88,470 4,74,835 6,02,140
800 4,45,395 4,85,415 5,98,748 7,58,540
Manufacture, supply and delivery of DI (Ductile Iron)
Wafer Butterfly valves conforming to IS 13095-1991. With
hand lever below 150 mm, with Worm gear for 200 mm
5
and above excluding transportation, CED and taxes etc,
completed
DIA IN MM PN 10 PN 16
40 4415 4415
50 4415 4415
65 4778 4778
80 5210 5710
100 7325 7594
125 9206 9206
313
Public Health Items
150 12432 12701

200 16867 16867
250 22445 22445
300 31584 31584
350 38327 41577
Manufacture and supply of– Air Release – Vacuum Break
– Surge Alleviation” Valve for potable water.
Construction material Cylindrical Body of Ductile Iron
GGG-50/SG-500-7, Three cylindrical Floats of High Density
6 Poly Ethylene. Baffle Plate, Orifice venture and all
construction bolts of stainless steel, coating internally
and externally. Electro statically applied epoxy (1) Flange
connection as per IS 1538, (2) Female (BSP/NTP Threaded
for sizes 25 mm
25 mm dia 11,660 - -
50 mm dia - 37,575 37,575
80 mm dia - 58,950 58,950
100 mm dia - 65,000 65,000
150 mm dia - 1,33,300 1,33,300
200 mm dia - 2,00,200 2,00,200
Manufacturer and supply of Metal Seated Gate Valve
Non- Rising Stem with by-pass & gear operated, for water
and sewage applications& dimensions confirming to IS
14846-2000. Material construction Body, Bonnet, Wedge
and Distance Piece of ductile iron GGG-50/SG500/7
DIN1693 or equivalent. Body seat, Wedge seat and Stem
nut of Aluminum Bronze BS EN 1982 CC331G/equivalent,
7
Stem of Stainless steel BS EN 100881.4057 or equivalent.
'O' Seal Body/Cover is of EPDM food grade Quality.
Fastners is of Steel Sheraplex coated to BS 3692 Gr 8.8 or
equivalent. Body and Bonnet internally and externally
blue two pack epoxy to WIS 4-52-01 Class B. Leakage
tested for seat 1.1 PN and body 1.5 x PN. Flange
connection as per IS 1538.
DIA IN MM PN 10 PN 16
DN700 10,80,039 10,80,039
DN800 13,65,553 13,65,553
DN 900 15,43,628 15,43,628
DN 1000 17,29,506 17,29,506
DN 1100 26,78,623 26,78,623
DN 1200 23,56,607 23,56,607
NOTE:-All the prices are ex-go down /ex-factory. Excise duty and CST /Local Tax Extra as applicable at the time
of supply. Packaging and Transportation extra at 5% on basic cost. The duties and taxes as applicable may be
added as per rules at the time of preparation of estimate. The grade of DI & conformation to specifications
shall be certified by a third party Quality Control Agency approved by indenting authority at the cost of
supplier.
314
Public Health Items
33. S.S RATES FOR SFRC MAN-HOLE FRAME WITH COVERS
S.S. Rates
Sl.No. Description Unit for 2010-
11.
1 2 3 4
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery

of manhole covers and frames with ISI marking anywhere
in A.P., F.O.R. destination including, loading, un-loading &
I Rs.
stacking at site but excluding central excise duty, sales tax,
octroi and other Govt levies etc., as applicable.
I.S.I Mark
a) M.D. -10 with 500mm dia clear opening Each 1294.00
b) H.D.-20 with 500mm dia clear opening Each 1668.00
C) H.D.-10with 560mmdia clear opening(New item) Each 1309.00
d) H.D.-20 with 560mm dia clear opening Each 1789.00
e) H.D.-35 with 560mm dia clear opening. Each 1916.00
f) 24x24 MD 10 Each 1410.00
g) 24x18 MD 10 Each 1298.00
h) 24x24 HD 20 Each 1586.00
i) 24x18 HD 20 Each 1616.00
j) Deviders 0.9 mtr. Each 3319.00
Manufacture as per company’s standard specification

supply and delivery of encapsulated plastic steps for man
holes anywhere in A.P. including cost of materials packing
136.00
II as per company’s standards, loading, transportation, Each
unloading and stacking at site of work etc, complete but
excluding taxes such as sales tax, C.E.D and others etc., as
applicable.
34. CI and M.S. DISMANTLING JOINTS
Sl.No. Description Unit 2010-11.

1 2 3 4
Manufacture, Supply and delivery of CI Dismantling Joints
with both side flange end suitable for installation in
1 between flange end pipes. These rates are excluding Rs.
Excise duty, Taxes and transportation charges etc.,
complete.
Nominal Dia. In MM
50 Each 2,995
80 Each 3,279
100 Each 4,304
125 Each 5,533
150 Each 6,070
200 Each 8,608
250 Each 10,248
300 Each 16,397
Manufacture, Supply and delivery of MS. Dismantling
2 Joints with both side flange end suitable for installation in Each
between flange end pipes. Thickness as per IS: 7322. These
315
Public Health Items
rates are excluding Excise duty, Taxes and transportation

charges etc., complete
Nominal Dia. In MM
350 38,889
400 44,564
450 48,348
500 57,867
600 67,335
700 74,911
750 76,805
800 91,956
900 95,935
1000 114,915
1100 124,403
1200 143,381
1300 162,357
1400 181,704
1600 200,718
1800 237,692
2000 295,796
Conveyance of joints and accessories including loading at 5% on basic cost
3
factory and unloading, stacking at site of work.
The duties and taxes as applicable shall be added as per rules at the time of preparation of
Note:
estimate.
35. S.S RATES FOR FUSION BONDED EPOXY COATING FOR THE YEAR 2010-11.
Sl. Rate
Description Unit
No. (Rs.)
1 2 3 4
Providing fusion bonded epoxy coating not less than 175 microns thickness
and upto 300 microns to reinforcement of all diameters as per IS 13620-
1993 including testing of coating at plant. The rate is inclusive of cost on
account of careful handling, PVC coated binding wire instead of GI binding
wire, touch up material supplied by coating agency, repair work, per MT 10,000.00
transportation from the source of supply of steel to the plant and
transportation of coated steel from the plant to site of work, loading,
unloading and straightening of bent rods etc., complete as per specification
and as directed by the Engineer-in-charge.
316
Public Health Items
36. OTHER ITEMS
S.S. Rates
Sl.
Description Unit for 2010-
No.
11.
1 2 3 4
SUPPLY AND DELIVERY OF PIG LEAD 99.99 % PURE 229.00

1 Per Kg
INCLUDING TAXES AND CONVEYANCE ETC., COMPLETE.
SUPPLY AND DELIVERY OF LEAD WOOL BEST QUALITY 120.00
Per Kg
SUPPLY AND DELIVERY OF SPUN YARN OF BEST QUALITY 90.00
2 Per Kg
SUPPLY AND DELIVERY OF RUBBER PACKING INCLUDING
3
TAXES AND CONVEYANCE ETC., COMPLETE.
a) 3 mm thick Per Kg 73.00
b) 6 mm thick Per Kg 73.00
SUPPLY AND DELIVERY OF BOLTS AND NUTS WITH DOUBLE
4 WASHERS INCLUDING TAXES AND CONVEYANCE ETC., Per Kg 89.00
COMPLETE. (1/2" TO 1")
317
Public Health Items
NEW ITEM
H.D.P.E PIPES- PE - 100 Grade- (SEWER LINES) FOR THE YEAR 2010-11.
6.0 kg/ 8.0 kg/ 10.0 kg/ 12.5 16.0
Sl.N
Description sqcm sqcm sqcm kg/ kg/
o
sqcm sqcm
1 2 3 4 5 6 7
I Manufacture, supply, & delivery of
HDPE pipes conforming to IS 14333 -
2000 For using Under Ground
Drainage & Sewerage systems
including transportation to any
where in A.P,excluding
xcise duty, A.P. VAT and specials etc.,
complete. ( Supply upto 90 mm
dia in coil & above 90 mm dia straight
length in 6 M or 12 M.)
Rate per Meter
OD 63 mm 87.18 110.70 133.23 156.59 188.16
OD 75 mm 123.72 156.59 188.09 223.65 267.39
OD 90 mm 175.84 224.13 269.04 318.54 384.96
OD 110 mm 251.26 319.43 379.93 456.27 545.29
OD 125 mm 321.75 410.96 492.73 584.89 704.50
OD 140 mm 403.01 513.80 617.89 734.95 883.70
OD 160 mm 525.68 669.73 805.42 957.46 1151.07
OD 180 mm 661.77 849.03 1017.76 1209.35 1456.02
OD 200 mm 819.63 1046.24 1254.57 1498.48 1793.68
OD 225 mm 1033.06 1319.69 1587.69 1887.93 2274.16
OD 250 mm 1274.85 1632.08 1959.57 2332.14 2801.35
OD 280 mm 1594.27 2042.44 2443.01 2932.08 3516.91
OD 315 mm 2017.67 2585.45 3106.15 3696.60 4447.35
OD 355 mm 2556.73 3274.08 3940.42 4701.45 5641.93
OD 400 mm 3388.06 4335.17 5205.68 6206.94 7445.47
OD 450 mm 4278.28 5486.16 6594.66 7844.35
OD 500 mm 5287.79 6764.05 8132.02 9693.10
OD 560 mm 6609.62 8475.84 10202.73
OD 630 mm 8370.91 10729.15 12891.55
OD 710 mm 10888.30 13946.37
OD 800 mm 13811.64
OD 900 mm 17495.25
OD 1000 mm 21613.78
Note:-
The variation in cost of HDPE pipes due to increase / decrease in raw material cost shall be allowed as per the following
price variation formula.
318
Public Health Items
319
Conveyance
Charges of Material
320
CONVEYANCE CHARGES OF MATERIALS AS PER SoR 2010-11
(COMMON TO ALL DEPARTMENTS).
LEAD, LIFT, LOADING AND UNLOADING CHARGES FOR MATERIALS

1. For total lead up to 150 m (including initial lead ) lead charges by head load only shall be adopted irrespective of mode
of conveyance.
2. For total lead exceeding 150 m conveyance by mechanical means only shall be adopted irrespective of mode of
conveyance.
3. The rates for loading at quarry including idle hire charges of trucks and hire charges
per for each kilometer and up to 5 km are cumulative and inclusive of total charges for
preceding lead.
4. Unless otherwise specified lead charges for Earth / Sand / Gravel / Aggregates and Stones are for loose volume and not
for compacted or in-situ volume.
5. The rates for lift charges, lead charges, hire charges are cumulative and inclusive of rates for preceding lift, lead and
hire charges.
6. Lift charges are not payable where conveyance of materials is by mechanical means to final placing point.
7. Loading and unloading charges are not payable for conveyance by head load.
8. Loading charges are not payable for conveyance by mechanical means for disposal of
excavated materials beyond initial lead of 50 m wherever specified.
9. Loading and unloading charges are not payable for conveyance by mechanical means for disposal of excavated
materials beyond initial lead of 1 km wherever specified.
10. The rates for unloading of materials except earth, sand, gravel, coarse aggregate, rubble, size stone and cut stone are
inclusive of stacking.
11. Hire charges are per 1KM for tippers and trucks for transport of materials from work site to dump yard and other
places are cumulative& includes previous km up to 5 kms
12. For detailed calculations, refer to the Lead & Lift charges (Common to all Departments) chapter of Irrigation & CAD
works (Part-1), A.P. Revised Standard data. The lead & lift charges are inclusive of 14% Contractors profit and Overhead
charges.
321
A. (Lead) Conveyance Charges for materials by head load
Cement /
Earth / Sand /Gravel / PCC slab/
Reinforce-
Total distance Murrum/ Lime/ Surki/ Shahbad slab / CC
ment
Sl No. ( Total lead includes initial Size stone / Cut stone block/ BS slab/
steel Str
lead ) Rubble / Coarse Late-rite / Wood
steel Rs
aggregate Rs/Cum Rs / cum
/ tonne
1 2 3 4 5
Total lead up to 50 m
1 (covered by item rate) initial lead initial lead initial lead
2 Total lead up to 100 m 31.90 18.60 40.60
3 Total lead up to 150 m 63.80 37.20 81.30
Notes: 1. No loading or unloading charges are admissible for conveyance by head load.
2. For total lead exceeding 150 m conveyance charges by mechanical means only shall be adopted irrespective of
mode of conveyance.
3.The lead charges are inclusive of 14% Contractor Profit and Over Head charges
B.( Lead) Conveyance charges for machinery per kilometer for transporting materials by tippers and trucks excluding
loading, unloading and idle hire charges of machinery FOR THE YEAR: 2010-11
( No loading and unloading charges allowed for machinery loading and unloading )
(Lead)
charges for
(Lead) trucks per
(Lead) (Lead) (Lead)
charges for 1000 Nos of
charges for charges for charges for
trucks and Bricks of
trucks and trucks and trucks and (Lead)
tippers per Modular &
tippers for tippers for tippers for charges for
cu.meter Non-
Earth / Rubble/Size Cement/ trucks and
Sl for PCC modular
Distance Sand stones/ Cut Steel/ RCC tippers per
No. slabs/ sizes (for
/Gravel / Stones/ poles/ AC & cu.meter
Shahabad larger size
Murrum/ Coarse GI sheets/ water/
slabs/ CC & bricks,
Lime/ aggregate Packed 1000 litres
Laterite conveyance
Surki/ per per materials/t
blocks/ may be
cu.meter cu.meter onne
Wood/ cum allowed on
equivalent
volume)
1 2 3 4 5 6 7 8
1 Lead up to 1 km 21.50 19.10 11.90 28.00 11.90 31.75
2 Lead up to 2 km 30.20 26.70 16.70 39.20 16.70 44.46
3 Lead up to 3 km 40.20 40.20 25.10 59.10 22.20 59.28
4 Lead up to 4 km 48.80 48.80 30.50 71.80 27.00 71.98
5 Lead up to 5 km 57.40 57.40 35.90 84.50 31.80 84.68
for Every km beyond
6 5 km up to 30 km 8.60 8.60 5.40 12.70 4.80 12.70
for Every km beyond
7 30 km 7.20 7.20 4.50 10.60 4.00 10.58
Note: The lead charges are inclusive of 14% Contractor Profit and Over Head charges
322
C. LOADING AND UNLOADING CHARGES BY MANUAL MEANS ( idle hire charges of trucks are not added)
Earth /
Rubble/ size
Sand
stone/ cut
/Gravel brick work
stone/ Coarse cement in steel in
Sl No. Description of item Murrum/ / Rs/1000
aggregate, Rs/tonne Rs./tonne
Surki/ No
Lime in
Rs/cum
Rs / cum
1 2 3 4 5 6 7
1 Loading 10.60 21.10 34.90 41.80 29.00
2 Unloading 5.30 10.55 34.90 41.80 29.00
D. LOADING AND UNLOADING CHARGES BY MANUAL MEANS (including idle hire charges of trucks )
Earth / Sand Rubble/ size
/Gravel stone/ cut
brick work
Description of Murrum/ / stone/ Coarse cement in steel in
Sl No. Rs/1000
item Surki/ aggregate, Rs/tonne Rs./tonne
No
Lime in
Rs / cum Rs/cum
1 2 3 4 5 6 7
1 Loading 68.30 78.90 98.60 105.60 134.10
2 Unloading 24.50 39.45 98.60 105.60 134.10
Note: The lead charges are inclusive of 14% Contractor Profit and Over Head charges.
E.LOADING AND UNLOADING CHARGES BY MECHANICAL MEANS (including idle hire charges of trucks)
Earth / Sand /Gravel Rubble/ size stone/ cut
Sl Description of
Murrum/ / Surki/ stone/ Coarse aggregate,
No. item
Rs / cum Lime in Rs/cum
1 2 3 4
1 Loading 34.30 68.30
2 Unloading 10.90 10.90
F. LIFT CHARGES FOR MATERIALS BY HEAD LOAD

Sl Total lift Earth / Sand /Gravel Cement /Reinforce- PCC slab/
No. ( Total lift includes initial Murrum/ Lime/ Surki/ ment steel Str steel Shahbad
lift ) Size stone / Cut stone Rs / tonne slab / CC block/
Rubble / Coarse BS slab / Laterite
aggregate / Wood
Rs / cum Rs / cum
1 2 3 4 5
1 Total lift up to 3 m Initial lift Initial lift Initial lift
(covered by item rate)
2 For Every 1.00 Lift 3.70 2.70 5.00
beyond initial lift of 3
meters
323
HIRE CHARGES
324
HIRE CHARGES OF PLANT & MACHINERY
Fuel Crew
Sl. Hire charge
Description of machinery Unit charge in Charge in Total in Rs
No in Rs
Rs Rs.
1 2 3 4 5 6 7
1 Agitator car / Transit mixer 2 cum Hour 594.10 582.30 160.40 1336.80
2 Air compressor 5 cmm ( electric ) Hour 67.40 129.90 96.50 293.80
3 Air compressor 7 cmm ( diesel ) Hour 165.80 476.40 123.60 765.80
4 Air compressor 7 cmm ( electric ) Hour 96.50 173.20 96.50 366.20
5 Air compressor 8.5 cmm ( diesel) Hour 191.30 595.50 123.60 910.40
6 Air compressor 8.5 cmm ( electric) Hour 109.30 216.50 96.50 422.30
7 Air compressor 15 cmm ( electric) Hour 91.50 481.20 103.00 675.70
8 Angle Dozer 90 hp Hour 1193.80 407.40 128.70 1729.90
9 Batching plant 0.5 cum ( 6 Cum/hr) Hour 91.00 57.70 185.30 334.00
10 Batching plant 2 x 1.00 cum ( 15 Cum/hr) Hour 239.60 173.20 185.30 598.10
11 Batching plant 2 x 1.50 cum ( 50 Cum/hr) Hour 306.70 211.70 185.30 703.70
12 Bending machine 3000 x 12 mm Hour 14.50 57.70 77.20 149.40
13 Clamp shell and hoisting ropes Hour 3.80 0.00 0.00 3.80
14 Concrete bucket 1.5 cum Hour 12.00 0.00 0.00 12.00
15 Concrete hand mixer 45 / 30 ltr Hour 3.80 0.00 0.00 3.80
16 Concrete mixer 300 / 200 (diesel) Hour 41.20 52.90 128.70 222.80
17 Concrete mixer 300 / 200 ltr (electric) Hour 37.60 19.20 128.70 185.50
18 Concrete mixer 600 / 400 (diesel) Hour 69.90 105.90 128.70 304.50
19 Concrete mixer 600 / 400 ltr (electric) Hour 57.30 38.50 128.70 224.50
20 Concrete paver 100 sqm / hr Hour 257.60 0.00 247.10 504.70
21 Convey mucker Hour 619.00 134.00 103.00 856.00
22 Core drilling machine Hour 233.00 158.80 154.40 546.20
23 Diesel generating set 30 KVA Hour 45.40 423.50 77.20 546.10
24 Diesel generating set 50 KVA Hour 60.10 635.30 77.20 772.60
25 Diesel Loco 45 hp Hour 225.80 357.30 96.50 679.60
26 Dewatering pump 5 hp ( diesel ) Hour 7.70 52.90 64.40 125.00
27 Dewatering pump 5 hp ( electric ) Hour 1.90 19.20 48.30 69.40
29 Dewatering pump 10 hp ( electric Hour 3.00 38.50 48.30 89.80
31 Dewatering pump 20 hp ( electric Hour 5.50 77.00 48.30 130.80
32 Drifter Hour 201.50 0.00 193.10 394.60
33 Drilling jumbo Hour 272.50 28.60 103.00 404.10
34 Dumper 4.5 cum Hour 366.20 266.80 128.30 761.30
35 Geophysical Electric resistivity meter Hour 60.30 0.00 0.00 60.30
36 Grouting pump Hour 17.90 19.20 154.40 191.50
37 Guniting / sand blast equipment Hour 78.20 0.00 128.70 206.90
38 Ice plant & accessories 30 t / day Hour 129.70 548.50 77.20 755.40
39 Jack hammer Hour 12.30 0.00 193.10 205.40
40 Needle vibrator 40 mm ( petrol ) Hour 5.40 10.60 92.60 108.60
41 Needle vibrator 40 mm ( electric ) Hour 6.10 3.80 92.60 102.50
42 Needle vibrator 60 mm ( petrol ) Hour 5.60 15.90 92.60 114.10
43 Needle vibrator 60 mm ( electric ) Hour 7.30 5.80 92.60 105.70
44 Planing machine 4 m stroke Hour 83.80 57.70 123.60 265.10
325
Fuel Crew
Sl. Hire charge
Description of machinery Unit charge in Charge in Total in Rs
No in Rs
Rs Rs.
1 2 3 4 5 6 7
45 Plate shearing machine up to 12 mm Hour 29.20 77.00 77.20 183.40
46 Pneumatic placer 0.5 cum Hour 124.40 0.00 50.30 174.70
47 Pneumatic tamper Hour 12.50 0.00 154.40 166.90
48 Pug cutting machine Hour 5.50 1.90 0.00 7.40
49 Pusher leg Hour 7.70 0.00 0.00 7.70
50 Road roller diesel 10 t Hour 146.80 476.40 123.30 746.50
51 Shovel 0.50 cum 75 hp Hour 644.00 317.60 128.70 1090.30
52 Shovel 0.85 cum 110 hp Hour 1097.50 582.30 128.70 1808.50
53 Stationery derrick crane Hour 62.30 0.00 0.00 62.30
54 Tipper 5 cum Hour 329.50 200.10 100.20 629.80
55 Tipping tub 1.5 cum Hour 30.90 0.00 0.00 30.90
56 Tower crane 5 tonne Hour 663.10 100.10 103.00 866.20
57 Transformer 250 KVA Hour 3575.00 0.00 0.00 3575.00
58 Truck 10 t Hour 260.70 200.10 96.30 557.10
59 Truck mounted derrick crane 5 t Hour 396.20 200.10 96.30 692.60
60 Upright drilling machine/grinder Hour 16.90 19.20 100.60 136.70
61 Ventilation fan 20 hp Hour 5.80 77.00 16.70 99.50
62 Vibratory pad foot roller 8 t Hour 862.30 688.20 154.10 1704.60
63 Wagon drill Hour 136.90 0.00 154.40 291.30
64 Water tanker 8000 ltr Hour 260.70 200.10 96.30 557.10
65 Welding set Hour 12.20 46.20 0.00 58.40
66 Winch 35 hp ( electric ) Hour 92.80 94.30 154.40 341.50
326
ANNEXURE
327
Copy of
ABSTRACT
Mines and Minerals - Amendments to Rule 10 of the Andhra Pradesh Minor Mineral
Concession Rules, 1966 - Orders - Issued.
-----------------------------------------------------------------------------------------------------------
INDUSTRIES AND COMMERCE (M.I) DEPARTMENT
G.O.Ms.No.198. Dated: 13.08.2009
Read the following:
1. G.O.Ms.No.217, Industries & Commerce (M-I) Dept., dated 29-09-2004.
2. From the Director of Mines & Geology, File No.25395/MR/ 2007, Dated: 29.9.2007.
3. G.O.Ms.No.104, Ind. & Com. (M.I) Department, dt.15.5.2009.
***
ORDER :
The following notification will be published in the Extra-Ordinary issue of the Andhra Pradesh Gazette
dated 13.8.2009.
2. This order shall come into force with immediate effect.
NOTIFICATION
In exercise of the powers conferred by sub-section (1) of section 15 of the Mines and Minerals (Development
& Regulation) Act,1957 (Central Act 67 of 1957), the Governor of Andhra Pradesh hereby makes the following
amendments to the Andhra Pradesh Minor Mineral Concession Rules, 1966 issued in G.O.Ms.No.1172,
Industries and Commerce(M-I) Department, dated 04-09-1967 and subsequently amended from time to time.
AMENDMENTS
In the said rules, Under Rule 10 for Schedules I and II the following shall be substituted, namely :
“SCHEDULE -I
RATES OF SEIGNIORAGE FEE
Sl.No. Name of the Minor Mineral Unit Rate of Seigniorage Fee
(in Rupees)
1 2 3 4
3
1 Building Stone M /MT Rs.50/33
(Rupees Fifty /Thirty Three)
3
2 Rough Stone/Boulders M /MT Rs. 50/33
3
3 Road Metal & Ballast M /MT Rs. 50/33
3(a) Dimensional Stone MT Rs.88/-
used for Kerbs & Cubes (Rupees Eighty Eight)
4 Limekankar / Limestone MT The rate of Royalty as applicable to
limestone (other than L.D. Grade) in
respect of Major Mineral as per the 2nd
Schedule of the Mines and Minerals
(D&R) Act, 1957.
5 Lime Shell MT Rs.88/- (Rupees Eighty Eight)
3
6 Marble M /MT Rs. 165/66 (Rupees One hundred and
Sixty Five/Sixty Six)
7 Mosaic Chips MT Rs. 44/- (Rupees Forty Four)
3
8 Muram/Gravel & M /MT Rs. 22/14 (Rupees Twenty Two/
Ordinary earth Fourteen)
3
9 Ordinary sand/Sand manufactured from M Rs. 40/- (Rupees Forty)
Boulders useful for Civil construction
3
10 Shingle M Rs. 17/- (Rupees Seventeen)
11 Chalcedony Pebbles MT Rs. 33/- ( Rupees Thirty Three)
12 Fullers Earth/Bentonite MT Rs. 110/- (Rupees One hundred and
Ten) and Rs.44/- (Rupees Forty Four)
13 Shale/Slate MT Rs. 110/- (Rupees Hundred and Ten )
328
14 Rehmati M³ Rs. 17/-(Rupees Seventeen )
15 Limestone slabs
a(i) Colour Rs. 7/- (Rupees Seven) per Sq. Mt. or Rs.
- 88/-(Rupees Eighty Eight) per MT
whichever is higher
(ii) White Rs. 5/-(Rupees Five)per Sq. Mt. or Rs.
- 55/-(Rupees Fifty Five) per MT.
whichever is higher
(iii) Black Rs. 4/- (Rupees Four) per Sq. Mt. or Rs.
- 44/- (Rupees Forty Four) per Mt.
whichever is higher
16 Ordinary clay, Silt and Brick Earth used in the Rs. 3850/- (Rupees three thousand eight
--
manufacture of Bricks including Mangalore tiles hundred and fifty only) per kiln per
annum for Bricks and Tiles
17. Granite Useful for Cutting:
(Rates in Cubic Metre)
Mini Gang
Super Saw above
Gang Saw 270 Cm X
Below 270 Cm. Below 75 Cm.
Item above 300 150 Cm. &
X 150 Cm. size Size
CMX 180 less than 300
CM. Size Cm X 180
Cm Size
Black Granite Rs. 3300/- Rs. 2625/- Rs. 2475/- Rs. 1100/-
Galaxy Variety (Rupees (Rupees Two (Rupees Two (Rupees One
Three thousand Six thousand Four thousand One
(a)
Thousand hundred and hundred and hundred only)
Three twenty five Seventy Five
hundred) only) only)
Black Granite other Rs. 2475/- Rs.2000/- Rs.1,925/- Rs.825/-
than Galaxy (Rupees Two (Rupees Two (Rupees One (Rupees Eight
Variety thousand thousand thousand Nine hundred and
(b)
Four hundred only) hundred and Twenty Five
and Seventy Twenty Five only)
Five only) only)
Colour Granite Rs. 2475/- Rs.2000/- Rs.1925/- Rs.825/-
Srikakulam Blue, (Rupees Two (Rupees Two (Rupees One (Rupees Eight
Indian aurora of thousand thousand thousand Nine hundred and
(c) Nizamabad Dist., Four hundred only) hundred and Twenty Five
Leptinites of Coastal Dists., and Seventy Twenty Five only)
Black pearl of Praksam and Five only) only)
Guntur Dists.
Colour Granite of RS.1,925/- Rs. 1625/- Rs.1650/- Rs.825/-
other varieties (Rupees One (Rupees One (Rupees One ( Rupees Eight
thousand thousand Six thousand Six hundred and
(d)
Nine hundred hundred and hundred Fifty Twenty Five
and Twenty Twenty five only) only)
Five only) only)
Note: Inrespect of Black Galaxy Granite, incentive of Rs. 250/- (Rupees Twon Hundred and fifty only) per cubic
metre is allowed for the blocks above 75 cms provided they are procured from the granite industry located
within State/Country.
329
SCHEDULE –II
RATE OF DEAD RENT
(PER HECTARE PER ANNUM)
Sl. Name of the Minor Mineral Rate of Dead Rent per

No. hectare per Annum
01 Black Granite Rs.55,000/- (Rupees fifty five thousand
only)
02 Colour Granite Rs.44,000/- (Rupees
forty four thousand only)
03 Limestone other than classified as Major Minerals used for Lime Rs.27,500/- (Rupees
burning for building construction purposes, Marble, Boulders, twenty seven thousand
Building Stone Including Stone used for Road Metal, Ballast and five hundred only)
Concrete and other Construction purposes, Shale, Slate and
Phyllites, Mosaic Chips, Fuller’s Earth/Bentonite & Dimensional
Stones used for cubes & kerbs,
04 Gravel, Morrum, Shingle, Limestone Slabs used for Flooring Rs.16,500/- (Rupees
purposes Limekankar, Chalcedeny pebbles used in the building sixteen thousand and five
purposes Limeshell for burning used for building purposes and hundred only)
Rehmatti.
NOTE:-1) The above rates are liable to be revised and amended from time to time by the State Government by
notification in the Andhra Pradesh Gazette.
2) In case of revision, the revised rates as fixed by Mines and Geology Department have to be
adopted.
330

Building SSR 2010 11

Uploaded by

Copyright:

Available Formats

Building SSR 2010 11

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Building SSR 2010 11

Uploaded by

Copyright:

Available Formats

GOVERNMENT OF ANDHRA PRADESH

BUILDING - SoR: 2010-2011

COMMITTEE OF CHIEF ENGINEERS

FOR THE YEAR 2010-2011

Procs.No. CEB/TA8/AEE3/SOR:2010-11 Dt:19-07-2010.

Ref:- 1. G.O.Rt.No.471, T,R&B (R.1) Dept., dt:20-04-2007.

Enclosed: Building SoR: 2010-11-CD as above

1 Index for Building Civil Items 5 5

3 Building Civil Items - Building-SOR-2010-11 9 80

4 Water Supply & Sanitary Items - Building-SOR-2010-11 81 123

5 Electrical Items – Building-SOR-2010-11 124 214

6 Common SOR:2010-11 – Preamble 215 223

7 Labour Rates 224 227

8 Basic Input Data for work items 228 247

9 Public Health Items 252 319

10 Conveyance Charges of Materials 320 323

11 Hire Charges of Plant & Machinery 324 326

12 Seigniorage Charges 327 330

2 SECTION - A BMT - A 01 to 20 BRICKS & BUILDING BLOCKS 10 11

3 SECTION - B BMT - B 01 to 16 NATURAL FLOORING STONES 11 12

4 SECTION - C BMT - C 01 to 52 WALL & FLOOR TILES 12 15

5 SECTION - D BMT - D 01 to 18 PAVING & INTERLOCKING TILES 15 16

6 SECTION - E BMT - E 01 to 20 TIMBER & ROOFING MATERIALS 16 17

7 SECTION - F BMT - F 01 to 30 MILD, GALVANISED & STAINLESS STEEL 17 18

8 SECTION - G BMT - G 01 to 79 FIXTURES FOR DOORS & WINDOWS 18 20

9 SECTION - H BMT - H 01 to 95 WATER PROOFING CHEMICALS & ADMIXTURES 20 23

10 SECTION - I BMT - I 01 to 21 GLASS 23 23

11 SECTION - J BMT - J 01 to 51 PAINTS & POLISHES 23 26

12 SECTION - K BMT - K 1 to 121 PARTICLE BOARDS 26 29

13 SECTION - L BMT - L 01 to 20 PLYWOOD 29 29

14 SECTION - M BMT - M 01 to 98 CEILINGS, WALL PARTITIONS & WALL LININGS 29 37

15 SECTION - N BMT - N 01 to 71 DOORS 37 51

16 SECTION - P BMT - P 01 to 77 WINDOWS 51 63

17 SECTION - Q BMT - Q 01 to 15 STRUCTURAL GLAZING 63 67

18 SECTION - R BMT - R 01 to 15 DISMANTLING 67 67

19 SECTION - S BMT - S 01 to 05 READY MIX CONCRETE 67 67

20 SECTION - U BMT - U 01 to 11 EXPANSION JOINT FILLERS 68 68

21 SECTION - V BMM - V 01 to 24 LABOUR CHARGES 68 69

22 SECTION - W BMS - W 01 to 68 MISCELLANEOUS ITEMS 69 74

23 SECTION - X BMC - X 01 to 12 MACHINERY CHARGES, HIRE CHARGES FOR CENTRING 74 74

o Corporate office of contractor.

A FOOTINGS Rs. 49.00 Rs. 303.00 Rs. 352.00 per 1 cum

D LINTELS Rs. 1266.00 Rs. 977.00 Rs. 2243.00 per 1 cum

D LINTELS Rs. 525.00 Rs. 492.00 Rs. 1017.00 per 1 cum

Sl. SS RATE FOR

Sl. SS RATE FOR

Sl. SS RATE FOR

Sl. SS RATE FOR

Sl. SS RATE FOR

Sl. SS RATE FOR

Sl. SS RATE FOR

Sl. SS RATE FOR

Sl. SS RATE FOR

Sl. SS RATE FOR

Sl. SS RATE FOR

Sl. SS RATE FOR

Sl. SS RATE FOR

Sl. SS RATE FOR

Sl. SS RATE FOR

Sl. SS RATE FOR