Scribd
Upload
54 views1 page

September 3 2003

The meeting took place at the Hope Center in Woodstock, Georgia from 6-11pm to set up a VPN configuration between the local network and a warehouse in a different location. They created a dial-up account with NetZero and configured the SMC7004FW router to allow VPN access from 192.168.1.200 to 192.168.1.220. Tests connecting from the warehouse through the NetZero VPN were successful, with the next step being to install the machine permanently at the warehouse.

Uploaded by

Harry Harshaw
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
54 views1 page

September 3 2003

The meeting took place at the Hope Center in Woodstock, Georgia from 6-11pm to set up a VPN configuration between the local network and a warehouse in a different location. They created a dial-up account with NetZero and configured the SMC7004FW router to allow VPN access from 192.168.1.200 to 192.168.1.220. Tests connecting from the warehouse through the NetZero VPN were successful, with the next step being to install the machine permanently at the warehouse.

Uploaded by

Harry Harshaw
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Hope Center Wednesday September 3, 2003 Thomas Watkins

Harry Harshaw
Meeting Place: Hope Center Wood stock Georgia
Meeting time: 6:00pm to 11:00pm
Hours of meeting: 5

Goal:
1. Create VPN account
2. Create dial up account
3. Log into the network using the VPN

Notes:

Now that the Network is configured, the focus of tonight was to set up the
configuration for the VPN so that the Warehouse could be connected to the local area
network. This is essential because the Warehouse is located in a different geographical
location.

The first thing that was done was to establish a dial up account. We decided to go
with Net-Zero as that provider. The reason behind this decision was because they where
economically feasible at $16.95 a month and provided a large amount of dial up numbers.

The machine that will be at the Warehouse has Windows 98 on it because it has an
older motherboard. It can have older equipment because it is not used as much and will
only be used to update inventory.

The VPN was configured which the Web based configuration on the
SMC7004FW Router made it very simple to setup. We configured the VPN like this.

LAN access
192.168.1.0
Host mode = used for windows based clients
DHCP Range used to assign IPS to VPN Clients 192.168.1.200 – 192.168.1.220 It is
configured at the Max VPN clients the router can Support which is 20.

After dialing up through the New Net-Zero account we where able to VPN to the
local area network and access all the shares without any issues.

The next task we need to accomplish is to place the machine at the Warehouse and
do an actual run with it. All tests where successful and everything is looking good.

You might also like