Scribd
Upload
325 views1 page

7216 03

This document provides specifications for a dual polarized antenna model 7216 used for 900 MHz cellular networks. It lists the antenna's electrical specifications including a gain of 12.5 dBi, dual slant 45 degree polarization, VSWR levels, beamwidths, front-to-back ratio, cross polarization and power handling capabilities. It also includes the antenna's mechanical specifications such as dimensions, weight, wind loading and mounting options. Performance charts and a comparison of antenna patterns are available separately.

Uploaded by

ken130104
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
325 views1 page

7216 03

This document provides specifications for a dual polarized antenna model 7216 used for 900 MHz cellular networks. It lists the antenna's electrical specifications including a gain of 12.5 dBi, dual slant 45 degree polarization, VSWR levels, beamwidths, front-to-back ratio, cross polarization and power handling capabilities. It also includes the antenna's mechanical specifications such as dimensions, weight, wind loading and mounting options. Performance charts and a comparison of antenna patterns are available separately.

Uploaded by

ken130104
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1900 & 800 MHz Dual Polarized Antenna 1800 & 900 MHz Dual Polarized Antenna

Electrical Specifications 7216


(XU-900-65-12.5i)

Gain 12.5 dBi (10.5 dBd)


Polarization linear, dual slant 45
VSWR, 50Ω <1.4:1 (880 MHz to 915 MHz)
VSWR, 50Ω <1.3:1 (925 MHz to 960 MHz)
Horizontal 3dB beamwidth 65°
Vertical 3dB beamwidth 26°
Custom electrical downtilts 0°
40 degree cone Front-to-back ratio >24 dB co-polar, >20 dB total power
Cross-polar discrimination, boresite >20 dB
Suppression of first upper side lobe >10 dB
Maximum CW input power 250W
Two tone intermodulation 3rd order< -107 dBm for 2x20W (150 dBc at 2x43 dBm)
Isolation between ports >30 dB

Mechanical Specifications
XU-900-65-12.5i

Connector 7/16 DIN or type N bottom mount


Height 660 mm (25.9")
Width 256 mm (10.1")
Depth 50 mm (2")
Weight 4kg (8.8 lb)
Survival wind speed 55 m/s (123 mph)
Maximum wind area 0.17 sq.m (1.8 sq ft)
Frontal wind load @150 km/h (C=1) 190 N (42.7 lbf)
*All feed network components DC grounded for Lightning Protection

Mounting Hardware Options for Installation


1) Pole mount 2165.10
2) Combined pole mount/downtilt bracket 7254.10 (-1.5° to +35°)

Comments For a complete list of released models pertaining


Gain is typical within frequency band.
to gain, electrical downtilt and connector placement,
Beamwidths are defined using total power.
Cross-polar discrimination is defined within -3 dB beamwidth. please see the quick reference guide on page 14.
Front-to-back ratio is defined within 20° from the backwards direction in any plane.
Sidelobe suppression and null fill is relative to peak of main beam.
Maximum input power is total input power, divided arbitrarily between inputs.
Radome color is NCS 2502-B (RAL 7035)(gray).

Typical Horizontal and Vertical 7216.03 Patterns

A poster displaying a comparison of antenna patterns has been included at the back of the catalog.

Base Station Antennas Page 16

You might also like