Scribd
Upload
2K views9 pages

Horizontal Distribution of Seismic Forces Sample

The document provides information to calculate the distribution of seismic forces on a structural system. It includes the dimensions, area, and location of columns, shear walls, and other elements. It then shows the calculations of centroidal axes, moments of inertia, and seismic forces based on the element properties and location. The total torsion and forces are summed.

Uploaded by

Dennis Mercado
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
2K views9 pages

Horizontal Distribution of Seismic Forces Sample

The document provides information to calculate the distribution of seismic forces on a structural system. It includes the dimensions, area, and location of columns, shear walls, and other elements. It then shows the calculations of centroidal axes, moments of inertia, and seismic forces based on the element properties and location. The total torsion and forces are summed.

Uploaded by

Dennis Mercado
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 9

I xcentroid =

bh
12
3
I ycentroid =
hb
3
Ix=I xc
12

J=I xcentroid +I ycentroid Iy=I yc


b= 12.00 mm h= 12.00 mm

Area = 144.00 mm2 dx = 40.00 mm

Ix = 131,328.00 mm4 Iy = 232,128.00 mm4

Ix = 0.000000131328 m4 Iy = 0.000000232128 m4
2
Ix=I xcentroid + A (d y )
2
Iy=I ycentroid + A (d x ) Y

dy = 30.00 mm

J= 363,456.00 mm4

J = 0.000000363456 m4

b
h X
Example of Horizontal Distribution of Seismic Forces
by: Engr. Dennis B. Mercado

Col/Shearwall b h Area x - c.g. frm origin Area x X


A1 0.40 0.40 0.16 - -
A2 0.40 0.40 0.16 5.00 0.80
A3 0.40 0.40 0.16 11.00 1.76
B1 0.40 0.40 0.16 - -
B2 0.40 0.40 0.16 5.00 0.80
B3 0.40 0.40 0.16 11.00 1.76
C1 0.40 0.40 0.16 - -
C2 0.40 0.40 0.16 5.00 0.80
C3 0.40 0.40 0.16 11.00 1.76
SW1 0.20 3.00 0.60 - -
SW2 0.20 3.00 0.60 11.00 6.60
SW3 0.20 4.00 0.80 - -
SW4 0.20 4.00 0.80 11.00 8.80
Total Are 4.24 Xc = 5 4/9

For comments and suggestions, email me at:


[email protected]

3 5/9 m
3 5/9 m
Seismic Forces
Ix Iy
y - c.g. frm origin Area x Y Ixc dy Ix Iyc dx Iy
7.00 1.12 0.00213 3 4/9 1.90 0.002133 5 4/9 4.74
7.00 1.12 0.00213 3 4/9 1.90 0.002133 4/9 0.03
7.00 1.12 0.00213 3 4/9 1.90 0.002133 5 5/9 4.94
4.00 0.64 0.00213 4/9 0.03 0.002133 5 4/9 4.74
4.00 0.64 0.00213 4/9 0.03 0.002133 4/9 0.03
4.00 0.64 0.00213 4/9 0.03 0.002133 5 5/9 4.94
- - 0.00213 3 5/9 2.02 0.002133 5 4/9 4.74
- - 0.00213 3 5/9 2.02 0.002133 4/9 0.03
- - 0.00213 3 5/9 2.02 0.002133 5 5/9 4.94
5.50 3.30 0.45 1 17/18 2.72 0.002000 5 4/9 17.79
5.50 3.30 0.45 1 17/18 2.72 0.002000 5 5/9 18.52
2.00 1.60 1.06667 1.55556 3.00 0.002667 5 4/9 23.72
2.00 1.60 1.06667 1.55556 3.00 0.002667 5 5/9 24.69
Yc = 3 5/9 ƩJ =

1 2

5m 6m

c.g.

3 5/9 m
3 5/9 m

5 4/9 m
Design Eq. Loads
J Torsion Px Py Direct Load, Pyd Px Py
6.65 5,500.00 22.09 34.92 377.36 22.09 412.28
1.93 5,500.00 22.09 2.85 377.36 22.09 380.21
6.84 5,500.00 22.09 (35.63) 377.36 22.09 341.72
4.78 5,500.00 2.85 34.92 377.36 2.85 412.28
0.07 5,500.00 2.85 2.85 377.36 2.85 380.21
4.97 5,500.00 2.85 (35.63) 377.36 2.85 341.72
6.77 5,500.00 (22.81) 34.92 377.36 (22.81) 412.28
2.06 5,500.00 (22.81) 2.85 377.36 (22.81) 380.21
6.97 5,500.00 (22.81) (35.63) 377.36 (22.81) 341.72
20.51 5,500.00 46.77 130.96 1,415.09 46.77 1,546.05
21.24 5,500.00 46.77 (133.63) 1,415.09 46.77 1,281.46
26.72 5,500.00 (49.89) 174.61 1,886.79 (49.89) 2,061.40
27.70 5,500.00 (49.89) (178.17) 1,886.79 (49.89) 1,708.62
137.19 m4

Vx = 10,000.00 kN
e= 0.55 m

3m

4m
4m

You might also like