Scribd
Upload
35 views1 page

Mac OS X Installation

This document provides instructions for adding the 1010ST Mac OSX driver and configuring installable options with the Mac OSX driver. The steps include inserting the software CD, copying the PPD file to the appropriate folder, adding the printer via IP or AppleTalk in Print Center, selecting the Xerox EX1010 model, highlighting the printer, selecting installable options from the info menu, and applying any selected options like tray 6 or punch.

Uploaded by

Neelaksh Chugh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
35 views1 page

Mac OS X Installation

This document provides instructions for adding the 1010ST Mac OSX driver and configuring installable options with the Mac OSX driver. The steps include inserting the software CD, copying the PPD file to the appropriate folder, adding the printer via IP or AppleTalk in Print Center, selecting the Xerox EX1010 model, highlighting the printer, selecting installable options from the info menu, and applying any selected options like tray 6 or punch.

Uploaded by

Neelaksh Chugh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Adding the 1010ST Mac OSX Driver

and
Configuring 1010 ST Installable Options with the Mac OSX Driver

1. Insert the Xerox EX1010 User Software CD in the Macintosh drive


2. On the Mac,
 Select the OSX Mac Print Driver Folder
 Select the hard drive
 Select Library -> Printers -> PPDs -> Contents -> Resources ->
 Select the appropriate language folder, such as en.lproj for English
3. Copy the Fiery EX1010 PS (PPD) file into the folder
4. Select Applications -> Utilities -> Print Center
5. Select Printers -> Add Printer -> IP Printing (or AppleTalk)
6. Enter IP address of Fiery -> Uncheck Use default queue on server
7. Enter the correct Queue Name below Use default queue on server
8. Scroll down Printer Model and select Xerox
9. Select the Fiery EX1010
10. Highlight the EX1010 printer in the Print Center
11. Select 'Show info' from the Printers menu on the top of the Mac screen (or select
Cmd+I)
12. In the dropdown menu at the top that usually shows 'Name & Location', select
'Installable Options'
13. Select the proper options and click 'Apply Changes'

Note: The installable option may be just an icon, as is the case for Tray 6, or a pull-
down menu, as is the case for Punch.

1010ST/Mac OS X
September 2, 2003
Page 1 of 1

You might also like