Scribd
Upload
108 views3 pages

LCD-240G064A 240 X 64 Dots Graphic LCD: Vishay

This document provides specifications for the Vishay LCD-240G064A 240 x 64 dot graphic LCD module. It has a built-in controller, operates at +5V, and has a 1/64 duty cycle. Key specifications include a viewing area of 133 x 39 mm, dot pitch of 0.53 x 0.53 mm, supply current of 18.5-21 mA, and pin definitions for data, power and control signals. Mechanical dimensions and ratings are also provided.

Uploaded by

arunan55
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
108 views3 pages

LCD-240G064A 240 X 64 Dots Graphic LCD: Vishay

This document provides specifications for the Vishay LCD-240G064A 240 x 64 dot graphic LCD module. It has a built-in controller, operates at +5V, and has a 1/64 duty cycle. Key specifications include a viewing area of 133 x 39 mm, dot pitch of 0.53 x 0.53 mm, supply current of 18.5-21 mA, and pin definitions for data, power and control signals. Mechanical dimensions and ratings are also provided.

Uploaded by

arunan55
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

LCD-240G064A

Vishay
240 x 64 Dots Graphic LCD

FEATURES
• Built-in controller (T6963C or equivalent)
• + 5V power supply
• 1/64 duty cycle
• Built-in N/V

MECHANICAL DATA ABSOLUTE MAXIMUM RATING


ITEM STANDARD VALUE UNIT ITEM SYMBOL STANDARD VALUE UNIT

Module Dimension 180.0 x 65.0 mm MIN. TYP. MAX.

Viewing Area 133.0 x 39.0 mm Power Supply VDD-VSS 4.75 5.0 5.25 V

Dot Size 0.49 x 0.49 mm Input Voltage VI - 0.3 – VDD V

Dot Pitch 0.53 x 0.53 mm


NOTE: VSS = 0 Volt, VDD = 5.0 Volt

ELECTRICAL SPECIFICATIONS
ITEM SYMBOL CONDITION STANDARD VALUE UNIT

MIN. TYP. MAX.

Input Voltage VDD L level 0.7VDD – VDD V

VIO H level 0 – 0.3VDD V

Supply Current IDD VDD = + 5V – 18.5 21.0 mA

- 20°C 13.0 13.5 14.1

Recommended LC Driving 0°C 12.5 13.1 13.7

Voltage for Normal Temp. VDD - V0 25°C 12.1 12.7 13.3 V

Version Module 50°C 11.1 12.2 13.0

70°C 9.1 11.6 12.8

LED Forward Voltage VF 25°C – 4.2 4.6 V

LED Forward Current IF 25°C – 450 900 mA

CCFL VF 25°C – 215 650 Vms

IF 25°C – – 5.0 mA

EL IEL Vel = 110VAC; 400Hz – – 5.0 mA

Document Number: 37247 For Technical Questions, Contact: [email protected] www.vishay.com


Revision 01-Oct-02 121
LCD-240G064A
Vishay 240 x 64 Dots Graphic LCD

PIN NUMBER SYMBOL FUNCTION


1 FG Frame Ground
2 Vss Power Supply (GND)
3 Vdd Power Supply (+ 5V)
4 V0 Contrast Adjustment
5 WR Data Write
6 RD Data Read
7 CE Chip Enable
8 C/D Command/Data Read/Write
9 Vee Negative Voltage Output
10 Reset Reset Signal
11 DB0 Data Bus Line
12 DB1 Data Bus Line
13 DB2 Data Bus Line
14 DB3 Data Bus Line
15 DB4 Data Bus Line
16 DB5 Data Bus Line
17 DB6 Data Bus Line
18 DB7 Data Bus Line
19 FS Font Selection FS = “H”, 6 x 8 Character Font
FS = “H” 8 x 8 Character Font
20 NC No Connection

DIMENSIONS in millimeters

2.54
4.13
22.86 13.0 0.53
0.49
2
(P2.54*9)

20 - Ø 1.0 PTH
20 - Ø 1.8 PAD 0.53
20 19 0.49

PIN DETAIL DOT SIZE


188.5 ± 0.5
180.0 ± 0.5
13.3 154.6
133.0 (VA) H1 MAX
23.5
120 ± 10
15.56

26.42 127.16 (AA) H2


13.0

5.5
6.2

3.5

2
33.88 (AA)

65.0 ± 0.5
39.0 (VA)
52.6
54.0

SH - 2530 2019

1.6
7.0 1.5 4 - O3.5 PTH
4 - Ø 7.0 PAD
CCFL LED EL/NO
2.0 176.0
H1 14.3 16.0 10.1
H2 7.8 11.0 5.1

www.vishay.com For Technical Questions, Contact: [email protected] Document Number: 37247


122 Revision 01-Oct-02
This datasheet has been download from:

www.datasheetcatalog.com

Datasheets for electronics components.

You might also like