Scribd
Upload
598 views3 pages

Pipe & Tube Specifications

The document provides specifications for carbon steel pipes, alloy steel pipes, and stainless steel pipes for high pressure and high temperature services. It lists the chemical composition and mechanical properties for various grades within each type of pipe based on Japanese Industrial Standards and ASTM specifications. Key elements like carbon, silicon, manganese, phosphorus, and sulfur content are defined for each grade.

Uploaded by

Ibrahim Ali
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
598 views3 pages

Pipe & Tube Specifications

The document provides specifications for carbon steel pipes, alloy steel pipes, and stainless steel pipes for high pressure and high temperature services. It lists the chemical composition and mechanical properties for various grades within each type of pipe based on Japanese Industrial Standards and ASTM specifications. Key elements like carbon, silicon, manganese, phosphorus, and sulfur content are defined for each grade.

Uploaded by

Ibrahim Ali
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

PIPING SPECIFICATIONS

CARBON STEEL PIPES FOR HIGH PRESSURE SERVICE

Sr. No. JIS C Si Mn P S Cu Cr Mo High Tensile Strength ASTM


kg/mm2 min.
1 STPT - 35 0.08-0.18 0.10-0.35 0.30-0.60 0.035 0.035 0.2 35

2 STPT - 38 0.25 0.10-0.35 0.30-0.90 0.035 0.035 0.2 38 A106 Gr. A

3 STPT - 42 0.3 0.10-0.35 0.30-1.0 0.035 0.035 0.2 42 A106 Gr. B

4 STPT - 49 0.33 0.10-0.35 0.30-1.0 0.035 0.035 0.2 49 A106 Gr. C

ALLOY STEEL PIPES FOR HIGH TEMPERATURE SERVICE

1 STPA - 11 0.1-0.20 0.10-0.50 0.30-0.80 0.035 0.035 0.10-0.20 38


MAX.
2 STPA - 12 0.1-0.20 0.10-0.50 0.30-0.80 0.035 0.035 0.45-0.65 39 A335 P1
MAX.
3 STPA - 21 0.1-0.20 0.50 MAX 0.30-0.60 0.035 0.035 0.80-1.25 0.20 -0.45 42
MAX.
4 STPA - 22 0.15 MAX 0.50 MAX 0.30-0.60 0.035 0.035 0.80-1.25 0.45-0.65 42 A335 P12

5 STPA - 23 0.15 MAX 0.50-1.00 0.30-0.60 0.03 0.03 1.00-1.50 0.45-0.65 42 A335 P11

6 STPA - 24 0.15 MAX 0.50-1.00 0.30-0.60 0.03 0.03 1.90-2.60 0.87-1.13 42 A335 P22

7 STPA - 25 0.15 MAX 0.50 MAX 0.30-0.60 0.03 0.03 4.00-6.00 0.45-0.65 42 A335 P5

8 STPA - 26 0.15 MAX 0.25-1.00 0.30-0.60 0.03 0.03 8.00-10.00 0.90-1.10 42 A335 P9
Sr. No. JIS C Si Mn P S Cu Cr

1 STBA - 11 0.1-0.20 0.10-0.50 0.30-0.80 0.035 0.035

2 STBA - 12 0.10-0.20 0.10-0.50 0.30-0.80 0.035 0.035

3 STBA - 21 0.10-0.20 0.50 MAX 0.30-0.60 0.035 0.035 0.80-1.25

4 STBA - 22 0.15 MAX 0.50 MAX 0.30-0.60 0.035 0.035 0.80-1.25

5 STBA - 23 0.15 MAX 0.50-1.00 0.30-0.60 0.03 0.03 1.00-1.50

6 STBA - 24 0.15 MAX 0.50 MAX 0.30-0.60 0.03 0.03 1.90-2.60

7 STBA - 25 0.15 MAX 0.50 MAX 0.30-0.60 0.03 0.03 4.00-6.00

8 STBA - 26 0.15 MAX 0.25-1.00 0.30-0.60 8.00-10.00

STAINLESS STEEL PIPES


JIS C Si Mn P S Ni Cr
1 SUS - 27 TP 0.08 1.00 2.00 0.04 0.03 8.00-11.0 18.0-20.0

2 SUS - 28 TP 0.03 1.00 2.00 0.04 0.03 9.00-13.00 18.0-20.0

3 SUS - 29 TP 0.08 1.00 2.00 0.04 0.03 9.00-13.00 17.0-20.0

4 SUS - 32 TP 0.08 1.00 2.00 0.04 0.03 10.0-14.0 16.0-18.0

5 SUS - 33 TP 0.03 1.00 2.00 0.04 0.03 12.0-16.0 16.0-18.0

6 SUS - 41 TP 0.15 1.00 2.00 0.04 0.03 12.0-15.0 22.0-24.0

7 SUS - 42 TP 0.15 1.50 2.00 0.04 0.03 19.0-22.0 24.0-26.0

8 SUS - 43 TP 0.08 1.00 2.00 0.04 0.03 9.0-13.0 17.0-20.0


Mo High Tensile Strength ASTM
kg/mm2 min.
0.10-0.20 38

0.45-0.65 39 A209 T1

0.20 -0.45 42

0.45-0.65 42 A213 T12

0.45-0.65 42 A213 T11

0.87-1.13 42 A213 T22

0.45-0.65 42 A213 T5

0.90-1.10 42 A213 T9

S
Mo High Tensile Strength ASTM
52 A312 TP304

49 A312 TP304L

52 A312 TP321

2.0-3.0 52 A312 TP316

2.0-3.0 49 A312 TP316L

52 A312 TP309

52 A312 TP310

52 A312 TP347

You might also like