Scribd Logo
Upload

Welcome to Scribd!

  • 35 views

    Rwerwrv01 D PDF

    Uploaded by

    koklender
    This document provides specifications for various steel parts that make up a bridge, including: 1. A table listing 5 parts (labeled a through e) with their dimensions, materials, and quantities. 2. Detailed drawings and specifications for each part, including dimensions, hole sizes, weights, material types, and connection/assembly details. 3. Notes specifying that all steel must be hot dip galvanized according to certain standards, threads must be cleaned after galvanizing, and sharp corners must be ground off. 4. Information at the bottom identifying the drawing as for a crossbeam of a suspended bridge with a 34cm walkway width and specifying the required number of crossbeams based on the

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Rwerwrv01 D PDF

    Uploaded by

    koklender
    35 views1 page
    This document provides specifications for various steel parts that make up a bridge, including: 1. A table listing 5 parts (labeled a through e) with their dimensions, materials, and quantities. 2. Detailed drawings and specifications for each part, including dimensions, hole sizes, weights, material types, and connection/assembly details. 3. Notes specifying that all steel must be hot dip galvanized according to certain standards, threads must be cleaned after galvanizing, and sharp corners must be ground off. 4. Information at the bottom identifying the drawing as for a crossbeam of a suspended bridge with a 34cm walkway width and specifying the required number of crossbeams based on the

    Original Title

    RWERWRV01 D.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for various steel parts that make up a bridge, including: 1. A table listing 5 parts (labeled a through e) with their dimensions, materials, and quantities. 2. Detailed drawings and specifications for each part, including dimensions, hole sizes, weights, material types, and connection/assembly details. 3. Notes specifying that all steel must be hot dip galvanized according to certain standards, threads must be cleaned after galvanizing, and sharp corners must be ground off. 4. Information at the bottom identifying the drawing as for a crossbeam of a suspended bridge with a 34cm walkway width and specifying the required number of crossbeams based on the

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    35 views1 page

    Rwerwrv01 D PDF

    Uploaded by

    koklender
    This document provides specifications for various steel parts that make up a bridge, including: 1. A table listing 5 parts (labeled a through e) with their dimensions, materials, and quantities. 2. Detailed drawings and specifications for each part, including dimensions, hole sizes, weights, material types, and connection/assembly details. 3. Notes specifying that all steel must be hot dip galvanized according to certain standards, threads must be cleaned after galvanizing, and sharp corners must be ground off. 4. Information at the bottom identifying the drawing as for a crossbeam of a suspended bridge with a 34cm walkway width and specifying the required number of crossbeams based on the

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Part No.

    Section

    Quantity

    [mm]

    [nos]

    Angle
    40/40/5
    610

    Flat
    100/6
    -106

    Weight

    Working Drawing

    kg / pc total kg

    Assembly Details

    2 holes 14

    1.81

    2
    2125

    185

    1 hole 19

    3 holes 14

    Section A

    2125

    19

    23 30

    3.62B

    0.46

    0.92B

    2
    c/c walkway cables = 44 cm

    Walkway cable

    Welding Detail of Part No. 1

    30 23

    For obtaining uniformity, the use of templates and jigs is mandatory

    Flat
    100/6
    -85

    0.38
    23

    54

    23

    to be welded

    to part 1a
    insert to part 1b

    Plain Rod
    8 -1480

    rod to be inserted
    21
    14

    IS 1363

    19

    2 holes 15

    100

    Hex Nut
    M12

    0.76B

    before welding

    0.015

    14

    0.06C

    1f

    before welding

    180

    0.58

    Ri=25

    1.16B

    1b

    1200

    Rod
    (J - Hook)
    12 - 209

    Ri

    Ri=21

    55

    120

    3
    4
    5

    Hex Nut
    M 12

    0.19

    Hex Bolt
    M 12x70

    0.40B

    105
    65

    225

    thread M12

    2.1

    0.015

    1c

    0.04C

    35

    145

    obtain alignment
    1d

    0.005

    6.3

    0.04C

    4.2

    0.08
    70

    IS 1363

    * or full threaded

    B = 6.86 kg

    C = 0.48 kg

    Transportation Weight
    B + C + 0.22 kg

    Total Structural Steel =


    Steel to be galvanized

    Nuts, Bolts, Washers

    All steelparts must be hot dip galvanized according to IS 2629 & 2633, min thickness = 80 m
    Nepal

    of holes

    threads to be cleaned after


    hot dip galvanization

    min 40*

    A = 7.56 kg

    Produced by

    225

    IS 1363

    Plain
    Washer
    13

    1a

    2.1

    Section B

    nuts to be welded
    centered to holes

    50

    70

    0.34C

    All structural steel must comply with:

    HMG / Ministry of Local Development

    *Required Nos of
    Crossbeams per bridge:

    = Span in [m]

    IS 226 - 1975 for structural steel


    IS 800 - 1984 for general construction in steel
    For Delivery:
    - The suspenders shall be folded together with the
    crossbeam and to be bound with a binding wire
    - All sharp corners are to be grinded off

    DoLIDAR / Short SpanTrail Bridge Standard


    Bridge Name:
    No:

    Span:

    Steel Drawing:

    Crossbeam for Suspended Bridge


    for 2 Walkway Cables
    for walkway width = 34 cm
    *Nos of Crossbeam required:
    Date : Nov. 05, 2001

    Drawing No. 01D

    Swiss Association for international Cooperation, in partnership with His Majestys Government of Nepal and funded and supported by the Swiss Government (SDC Nepal).

    You might also like