DTMF Controlled Robot Without Microcontroller
DTMF Controlled Robot Without Microcontroller
www.softroniics.in
9037291113, 9037061113
Softroniics
Softroniics
Calicut||Coimbatore||Palakkad
www.softroniics.in
9037291113, 9037061113
Softroniics
Circuit Diagram of DTMF Controlled Robotic Vehicle
without using Microcontroller:
Circuit Components:
Motor Driver IC
Motors
Capacitors C1 to C4
Crystal
Softroniics
Calicut||Coimbatore||Palakkad
www.softroniics.in
9037291113, 9037061113
Softroniics
Motor driver IC used is L293D. It has 16 pins. 2, 7, 10, 15 pins are the inputs of
motor driver IC connected from output pins of the decoder IC. The output pins are 3,
6, 11, 14. These pins are connected to the two motors of robotic vehicle. 8 th pin is
connected to the 5v. Vss is the input voltage with which the motors runs. Motors
cannot be driven with 5Vof microcontroller. So, a driver IC is used to amplify this
voltage. VSS pin provides this voltage.
Arrange the robot mechanically i.e. connect the wheels to the motors, place the circuit
on the robot with a mobile fixed to it.
DTMF robot with human detector sensor can be used at the time of disasters like earth
quake to detect the human under buildings.
DTMF robot may not work properly if it is operated with another mobile when there is
no signal.
Softroniics
Calicut||Coimbatore||Palakkad
www.softroniics.in
9037291113, 9037061113