Scribd
Upload
218 views9 pages

Manual Cooler CNPS9500A LED

This document is a user manual for the CNPS9500A LED CPU cooler. It provides instructions for safely installing the cooler on Intel and AMD sockets, details the included components, and explains how to install and use the Fan Mate 2 accessory to control fan speeds. Precautions are outlined to ensure safe handling and installation of the cooler. Specifications for the cooler and Fan Mate 2 such as dimensions, materials, fan specifications, and voltage outputs are also provided.

Uploaded by

virusel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
218 views9 pages

Manual Cooler CNPS9500A LED

This document is a user manual for the CNPS9500A LED CPU cooler. It provides instructions for safely installing the cooler on Intel and AMD sockets, details the included components, and explains how to install and use the Fan Mate 2 accessory to control fan speeds. Precautions are outlined to ensure safe handling and installation of the cooler. Specifications for the cooler and Fan Mate 2 such as dimensions, materials, fan specifications, and voltage outputs are also provided.

Uploaded by

virusel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Users Manual

CNPS9500A LED

Intel Socket 1155/1156/1151/1150/775 CPUs


AMD Socket FM2/FM1/AM3+/AM3/AM2+/AM2 CPU & APUs
To ensure safe and easy installation,
please read the following precautions.

www.ZALMAN.com
Ver.150811

1. Precautions
1)

Use and keep product away from reach of children and pets.

2)

Do not ingest the Thermal Grease, and avoid its contact with skin and
eyes. If contact is made with skin, wash off with water. If ingested or
irritation persists, seek medical attention.

3)

To prevent possible injuries, gloves must be worn while handling this


product.

4)

Excessive force exerted on the fan may cause damage to the fan and/
or system.

5)

Avoid inserting objects or hands into the fan while it is in operation to


prevent product damage and injuries.

6)

Check the components list and condition of the product before


installation. If any problem is found, contact the retailer to obtain a
replacement.

7)

Zalman Tech Co., Ltd. is not responsible for any damages due to
overclocking.

8)

During transportation of the system, the cooler must be removed.


Zalman is not responsible for any damages that occur during the
transport of a system.

9)

Product design and specifications may be revised to improve quality


and performance.

Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due
to external causes, including but not limited to, improper use,
problems with electrical power, accident, neglect, alteration,
repair, improper installation, or improper testing.

2. Specications
Model

Spec.

Fan

Fan
Mate 2

CNPS9500A LED

Material

Pure Copper

Weight

530g

Dimensions

85(L) 112(W) 125(H)

Bearing-Type

2 Ball-Bearing

RPM

1,350rpm ~ 2,600rpm 10%

Noise Level

18.5 ~ 27.5dBA 10%

Input Voltage

12V

Output Voltage

5 ~ 11V 2%

Maximum Capacity

Up to 6W

.COM

3. Components
1) Common Components

Users Manual

Cooler

Fan Mate 2

Clip

Fan Mate 2 Cable Double-Sided Tape Thermal Grease


(ZM-STG2M)

2) Intel Components

Clip Support

Clip Support Fixing Bolts

Nuts

Washers

Intel Clip Lever

Clip Fixing Bolts

3) AMD Components

AMD Clip Lever

.COM

4. Installation Requirements
1) Space Requirements
The coolers installation requires unobstructed space with dimensions of 155
(width), 88(length), 128(height), and the CPU as a central reference point.
Please check if components such as ODDs and PSU protrude into the required
space.

2) Air Guide Removal

Air guides on enclosures must be removed, before the coolers installation, for
they protrude into the coolers required space.
88

128

115

3) Cooler Orientation

It is recommended that the cooler be installed so that air ows from the cooler toward
the enclosures rear exhaust fan.

PSU

.COM

4) Installation Based On Clip Orientation


A. Horizontal Clip Orientation

B. Vertical Clip Orientation

.COM

5. Installation
1) Intel Socket 1155 / 1156 / 1151 / 1150 / 775 Installation
Install the Clip Support to the motherboard according to the socket-type.
Bolt(silver)
Clip Support

Socket 1155 / 1156/ 1151 /1150

Socket 775

M/B

Washer
Nut

Caution

Lever
Slot

Please make note of the Lever Slots direction when


installing the Clip Support.

Clear off any particles or residue from the CPUs surface then spread
a thorough layer of Thermal Grease on the CPU and the base of the
cooler.

.COM

Refer to page 4 Installation Based On Clip Orientation and position the


Clip over the coolers Base Cover.
Insert the Intel Clip Lever into the Clips Lever Slot then hook on the
Clips opposite end onto the Lug marked with the arrow head.
Press down the Clip Lever and hook on the Clip Lever onto its Lug.

Refer to Section 6 Fan Mate 2 Installation and Usage for instructions on


power connection.

2) AMD Socket FM2/FM1/AM3+/AM3/AM2+/AM2 Installation


Clear off any particles or residue from the CPUs surface then spread
a thorough layer of Thermal Grease on the CPU and the base of the
cooler.

Refer to page 4 Installation Based On Clip Orientation and position the


Clip over the coolers Base Cover.

.COM

Insert the AMD Clip Lever into the Clips Lever Slot then hook on the
Clips opposite end onto its Lug.
Press down on the Clip Lever and hook on the Clip Lever onto its Lug.

Refer to Section 6 Fan Mate 2 Installation and Usage for instructions on


power connection.

6. Fan Mate 2 Installation and Usage


1) Fan Mate 2 Installation
Connect Fan Mate 2 between the
Fan Cable and the motherboard
as shown in the diagram below.

Fan Mate 2 can be installed to the


side of the case using Double-Sided
Tape.

Double-Sided Tape

/B

Fan Connector (Cooler)

.COM

2) Fan Mate 2 Operation

Fan Speed Control Knob

Adjust the Fan Speed Control


Knob for RPM control.

BIOS Booting Error

In the case that you get a BIOS error beep:


Rotate the Fan Speed Control Knob clockwise to the maximum setting.
Disable CPU Fan Detected in BIOS setting or set the system monitoring
programs CPU Fan RPM to the lowest setting.
Certain motherboards will not boot if the CPU fans RPM is not detected. In this
case inquire to the motherboards manufacturer for additional details.

.COM

You might also like