Scribd
Upload
144 views

Microprocessor and Interfacing

This document contains a 40 question multiple choice quiz on digital integrated circuits and microcontroller applications. The questions cover topics like processor architectures, addressing modes, interrupts, timers, and serial communication interfaces for processors like 8085, 8086, 8051 and interfacing chips like 8255, 8253, 8259. Sample questions ask about the processor that uses pipelining, the flag used for single step execution in 8086, and the number of address lines required for a 64KB memory.

Uploaded by

sree2728
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
144 views

Microprocessor and Interfacing

This document contains a 40 question multiple choice quiz on digital integrated circuits and microcontroller applications. The questions cover topics like processor architectures, addressing modes, interrupts, timers, and serial communication interfaces for processors like 8085, 8086, 8051 and interfacing chips like 8255, 8253, 8259. Sample questions ask about the processor that uses pipelining, the flag used for single step execution in 8086, and the number of address lines required for a 64KB memory.

Uploaded by

sree2728
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 9

QUESTION BANK FOR COMPREHENSIVE ONLINE EXAM

Branch : ECE
Name of the Subject : DIGITAL IC APPLICATIONS

1. Which processor structure is pipelined?


a.8051
b.8255
c. 8085
d. 8086
2. ______ flag is used for single step execution in 8086
a. SF
b.DF
c. TF
d. ZF
3. The number of address lines required for 64 KB is
a. 15
b. 16
c. 11
d. 14
4. If the CS: OFFSET is 5000:2000 then EA is
a. 2000
b. 50200
c. 52000
d. 5000

5. The following is an 8 bit processor


a.8085
b. 8086
c. 80186
d. 80486
6. The flag which indicates whether the number of 1s is odd or even in the lower 8 bits is
a. ZF
b. PF
c. SF
d. AF
7. Which registers will contain the product of a 16 bit multiplication instruction
a. AX, DX
b. AX, BX
c. CX, DX
d. AH, AL
8. The addressable memory for 8085 is
a.64KB
b. 1MB
c. 16KB
d. 1GB
9. The instruction MVI A, 46H is _______ addressing mode
a. Register
b. Indirect
c. Implicit
d. Immediate

10. The size of the stack pointer register in 8086 is ________


a.12 bits
b. 16 bits
c. 8 bits
d. 32 bits
11. ____ is the internal function for CMP mnemonic
a. Addition
b. multiplication
c. Division
d. Subtraction
12. __________ interrupt has highest priority
a. INTR
b. RST 7.5
c. RST 6.5
d. RST 5.5
13. ________ processor is operated in multiprocessor mode
a. 4004
b. 8085
c. 8080
d. 8086
14. The size of instruction pipeline for 8086 is _________ bytes
a. 4
b. 6
c. 8
d. 16

15. _ _ _ _ _ _ _ prefix is used to compare two strings


a. REP
b. REPE
c. REPNZ
d. All
16. _ _ _ _ _ _ _ _ pair registers represents M register.
a. D, E
b. B, C
c. H, L
d. All
17. _ _ _ _ _ _ _ is a 8-bit microcontroller.
a. 8051
b. 8086
c. 8096
d. 8057
18. ____ device depends only on present inputs.
a. Combination
b. Sequential
c. Moore
d. Mealay
19. ________ IC is used as 3 to 8 decoder
a. 74 X 143
b. 74 X 157
c. 74 X 138
d. 74 X 139

20. ____ is a octal three state transceiver


a. 74 X 542
b. 74 X 243
c. 74 X 245
d. 74 X 241
21. ______ Package is used for more flexible comparisons and arithmetic operations.
a.Std_logic_ulogic
b. std_logic_arith
c. std_logic_unsigned
d. None
22. _______ gates are used for parity circuits
a. XOR
b. NAND
c. NOR
d. AND
23. _______ device has 2N input lines and N output lines
a. Decoder
b. Encoder
c. MUX
d. DEMUX
24. In order to receive the data using USART which signal is used
a. TXRDY
b. RXRDY
c. TXEN
d. RXEN

25. ________IC is used for serial communication


a. 8251
b.8279
c.8253
d.8255
26._____ register is used for masking the interrupt requests in 8259.
a. OCW1
b. ICW1
c. ICW3
d. OCW2
27. The combination of start bit, character and stop bits is called_________
a. Mode
b. Baud rate
c. Frame
d. None
28. In 8253_________ acts as rate generator
a. Mode 0
b. Mode 1
c. Mode 2
d. Mode 3
29. In 8255, _______ numbers of IO lines are available.
a. 12
b. 24
c. 8
d. 16

30.The following interfacing device is a DMA controller


a. 8237
b. 8255
c. 8253
d. 8259
31._____ signal is used to clear the end of interrupt.
a. EOI
b. IMR
c. IRR
d. ISR
32. The programmable Interval Timer 8253 has _____ number of counters.
a. 2
b. 1
c. 3
d. 4
33. In 8051, the size of internal RAM memory is ______
a. 64KB
b. 256KB
c. 128 Bytes
d. 4KB
34. _____ IO port can be used for serial communication.
a. Port 3
b. Port 1
c. Port 2

d. Port 0
35. _____ register is used to double the baud rate in 8051.
a. SCON
b. PCON
c. IE
d. IP
36. _________ number of interrupts available in 8051 excluding reset
a. 10
b. 5
c. 4
d. 255
37. ________ pin is used to access the data from external memory in 8051
a. EN
b. EA
c. BHE
d. None
38. _______register is used to select register bank for working registers
a. PSW
b. Accumulator
c. TCON
d.TMOD
39. _________ registers are only used for Register Indirect addressing mode
a. R2, R3
b. R3, R4
c. R6, R7

d. R0, R1
40. Register used for serial communication in 8051________
a. STCON
b. SMOD
c. SCON
d. SCCN

You might also like