Scribd
Upload
3K views2 pages

Clucth Scania

The document provides specifications for several clutch models K432 15 through K432 18 including the type of clutch, lining diameter, pressure plate lift, maximum clutch plate distortion, and tightening torque. It also describes a special tool, gauge 99 315, for checking clutch plate wear by measuring through the flywheel housing prising hole.

Uploaded by

NoeRtjahya Ahmad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views2 pages

Clucth Scania

The document provides specifications for several clutch models K432 15 through K432 18 including the type of clutch, lining diameter, pressure plate lift, maximum clutch plate distortion, and tightening torque. It also describes a special tool, gauge 99 315, for checking clutch plate wear by measuring through the flywheel housing prising hole.

Uploaded by

NoeRtjahya Ahmad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

04:02-01

Issue 2

Clutch
K432 15
K432 16
K432 17
K432 18
Specifications

1 585 736

Scania CV AB 1998, Sweden

en

Clutch
K432 15, K432 16, K432 17,
K432 18
Specifications
Type

Pull type

Lining diameter

430 mm

Pressure plate lift

min. 1.8 mm

Clutch plate, max. distortion

0.8 mm

Tightening torque

47 Nm

Special tools
Designation

99 315

Gauge

Drawing
99 315

0_1665

Number

Checking plate wear


Plate wear must be measured directly on the
plate.
Use gauge 99 315 and measure through the prising hole in the flywheel housing as illustrated.

04_0478

The thickness of a new plate is 10 mm, and the


wear limit is 7 mm.

Scania CV AB 1998, Sweden

0410w01b.mkr

You might also like