Bn1212 Tubo para Medir Absorción Bruel N Jaer
Bn1212 Tubo para Medir Absorción Bruel N Jaer
Bn1212 Tubo para Medir Absorción Bruel N Jaer
Features
Turnkey system for ease of operation during calibration,
measurement and data export
Measure at OASPL up to 155 dB
Measurement parameters and routines include:
Absorption and reflection coefficients
Normalised impedance and admittance
Measurements viewable in real-time for ease of monitoring
WB-3514
Power Amplifier
WB-3514 Power Amplifier
Output
Input
Power
3160-A
LAN XI Module
WA-1599
PC
120523
Road Surface Absorption Measurement System Type 9740 can be used for in situ measurement of the
quality assurance acoustic properties of test track asphalt, which is regulated by ISO 10844 and ISO 13472.
The system is based on the two-microphone, transfer-function test method, which means that
measurements take only a fraction of the time required by traditional, standing-wave ratio systems. Using
two fixed microphones, the test system makes simultaneous measurements at all frequencies of interest.
PULSE Acoustic Material Testing Type 7758 works in conjunction with a PULSE data acquisition unit and
Road Surface Absorption Measurement Tube WA-1599. As a result, all the benefits of the PULSE platform
are available, including advanced features for calibration, measurement, display and reporting, the PULSE
task-oriented user-interface, and extreme accuracy. The system also contains all the functionality of the
standard material testing software, which is a complete and fully integrated system for making acoustic
measurements in the frequency range 220 Hz to 1.8 kHz with narrowband analysis, and 250 Hz to 1.6 kHz
with 1/3-octave band analysis.
Fig. 2
WA-1599-W-003:
A carrying case
showing all system
components
Mic/Power
Cable
Tube with
Tripod
Calibration
Plate
Power Amplifier
Power Supply
Insulating Material
CE-mark indicates compliance with: EMC Directive and Low Voltage Directive.
C-Tick mark indicates compliance with the EMC requirements of Australia and New Zealand.
Safety
EN/IEC 610101: Safety requirements for electrical equipment for measurement, control and laboratory use.
ANSI/UL 610101: Safety requirements for electrical equipment for measurement, control and laboratory use.
EMC Emission
EN/IEC 6100063: Generic emission standard for residential, commercial and light industrial environments.
EN/IEC 6100064: Generic emission standard for industrial environments.
CISPR 22: Radio disturbance characteristics of information technology equipment. Class B Limits.
FCC Rules, Part 15: Complies with the limits for a Class B digital device.
This ISM device complies with Canadian ICES001 (interference causing equipment standard)
EMC Immunity
EN/IEC6100061: Generic standards Immunity for residential, commercial and light industrial environments.
EN/IEC 6100062: Generic standards Immunity for industrial environments.
EN/IEC 61326: Electrical equipment for measurement, control and laboratory use EMC requirements.
Note: The above is only guaranteed using accessories listed in this Product Information.
Temperature
IEC 6006821 & IEC 6006822: Environmental Testing. Cold and Dry Heat.
Operating Temperature: 10 to +55C (15 to 131F)
Storage Temperature: 25 to +70C (13 to 158F)
Humidity
Mechanical
Non-operating:
IEC 6006826: Vibration: 10 500 Hz, 0,15 mm peak below 58 Hz, 20 m/s2 above
IEC 60068227: Shock: 1000 m/s2
IEC 60068229: Bump: 1000 bumps at 400 m/s2
Enclosure
LOUDSPEAKER
Max. RMS Power: 50 W at 20C (68F)
Impedance: 8
Diameter: 35 mm (1.38)
OPERATION
Sound source activation and status indicator integrated in handle
DIMENSIONS
Tube Inner Diameter: 29 mm (1.14)
Tube Length: 208.2 mm (8.2)
Handle: 100 mm (3.94)
ASSEMBLED DIMENSIONS (EXCL. CABLE AND HANDLE)
345.5 85 160 mm (13.6 7.3 6.3)
WEIGHT (WITHOUT ACCESSORIES)
4.2 kg (9 lb 4 oz.)
REQUIRED SOFTWARE
Microsoft Windows 7 SP1 (all editions) or Windows XP
Professional (SP3)
Microsoft Office 2003 (SP3), Office 2007 (SP2) or Office
2010 (x32 only)
Ordering Information
OPTIONAL ACCESSORIES
Type 4228
Pistonphone
Type 4231
Sound Calibrator
DP-0775
Adaptor for Microphones (for Type 4231)
WS-4929-W-002 Flat Flange for Machining to Curved Surface, 65 mm
(2.56)
Type 4206
Impedance Tube Kit (50 Hz 6.4 kHz)
Type 4206-A
Impedance Tube Kit (100 Hz 3.2 kHz)
WA-1706
Sample Holder
AVAILABLE SPARES
Type 2670-W-007 Short Preamplifier Type 2670 with 10 m (32.8 ft.) cable
Type 4187
Condenser Microphone
WC-0015
Microphone Fixing Knob
TRADEMARKS
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries
Brel & Kjr reserves the right to change specifications and accessories without notice. Brel & Kjr. All rights reserved.
HEADQUARTERS: Brel & Kjr Sound & Vibration Measurement A/S DK-2850 Nrum Denmark
Telephone: +45 7741 2000 Fax: +45 4580 1405 www.bksv.com [email protected]
Local representatives and service organisations worldwide
BN-1212---,
BN 1212 11
2012-11