BO05E856S5

SFP 2.5G 850nm 550M

RoHS Compliant Optical Transceiver

SFP 2.5G 850nm Multi mode Optical Transceiver

Features

Description
The BlueOptics BO05E856S5 SFP transceiver is a
high performance, cost effective module supporting a
data rate up to 2.5Gbps with 550 Meter link length on
multi mode fiber.
BlueOptics transceivers are 100% compliant with
SFP Multi-Source Agreement (MSA).
All BlueOptics SFP transceivers can be equipped
with digital diagnostic function compliant to MSA SFF8472.
Using digital diagnostic, BlueOptics SFP transceivers
provide the following real time information:
-

Supply voltage
Laser bias current
Laser average output power
Laser received input power
Temperature

The transceiver consists of five sections: A VCSEL

transmitter, a PIN photodiode, a trans-impedance
preamplifier (TIA), the LD Driver and the digital
diagnostic function.

Applications

1x / 2x Fibre Channel

Gigabit Ethernet

SDH / SONET

Router/Server Interface

Other optical links

-1-

2.5Gb/s serial optical interface

VCSEL laser transmitter

PIN photo-detector

Hot-pluggable SFP footprint compliant to

SFF-8074i

Duplex LC/UPC
interface

2-wire interface for management

Metal enclosure, for lower EMI

RoHS compliant and lead-free

Single +3.3V power supply

Compliant with SFF-8472

Case operating temperature

-

type

pluggable

Commercial: 0C to +70C
Extended: -10C to +80C
Industrial: -40C to +85C

optical

BO05E856S5
SFP 2.5G 850nm 550M
RoHS Compliant Optical Transceiver

Warnings

Order Information

Handling Precautions: This device is susceptible to

damage as a result of electrostatic discharge (ESD). A
static free environment is highly recommended.

Part No.
BO05E856S5

Laser Safety: Even small radiation emitted by laser

devices can be dangerous to human eyes and lead to
permanent eye injuries. Be sure to avoid eye contact
with direct or indirect radiation.

Temp.

DDM

0C to +70C

BO05E856S5EX

-10C to +80C

BO05E856S5IN

-40C to +80C

BO05E856S5D

0C to +70C

BO05E856S5DEX

-10C to +80C

BO05E856S5DIN

-40C to +80C

Regulatory Compliance

Warranty
Every BlueOptics transceiver comes with a 5 year
replacement warranty and lifetime support.
For a warranty inquiry, please contact your CBO sales
representative.
This warranty only covers the first user of the
equipment.

Feature
Electrostatic

Standard

Discharge (ESD)
Electromagnetic

- FCC Part 15 Class B EN 55022

Interference (EMI)

- Class B (CISPR 22A)

Laser Eye Safety

- FDA 21CFR 1040.10, 1040.11

- IEC/EN 60825-1, 2

Important Notice

Component
Recognition

- IEC/EN 60950, UL

Performance figures, data and any illustrative

material provided in this data sheet are typical and
must be specifically confirmed in writing by CBO
before they become applicable to any particular order
or contract. In accordance with the CBO policy of
continuous improvement specifications may change
without notice.

RoHS

- 2002/95/EC

EMC

- EN61000-3

The publication of information in this data sheet does

not imply freedom from patent or other protective
rights of CBO or others.
Further details are available from any CBO sales
representative.

Installation
Before installation attach an ESD-preventive wrist to
ensure not to damage the transceiver or hardware.
BlueOptics BO05E856S5 can be installed in any
Small Form Factor Pluggable (SFP) port. You can install
the BO05E856S5 regardless if the system is powered
on or off, because it is hot-swappable.
Insert the transceiver into the SFP port and remove the
dust cap.

You can now connect your cable.

-2-

Co.

- IEC/EN 61000-4- 2

Class 1

BO05E856S5
SFP 2.5G 850nm 550M
RoHS Compliant Optical Transceiver

1. Absolute Maximum Ratings

Parameter
Storage Temperature
Storage Ambient Humidity

Symbol
Ts
HA

Min.
-40
5

Typ.

Max.
85
95

Unit
C
%

2. Recommended Operating Conditions

Parameter

Symbol

Case Operating Temperature

Min.
0

Tcase

Ambient Humidity
Data Rate
Transmission Distance
Coupled Fiber

HA

Typ.

Max.
70

Unit

-10

80

-40

85

Note
BO05E856S5
BO05E856S5D
BO05E856S5EX
BO05E856S5DEX
BO05E856S5IN
BO05E856S5DIN

70

%
Mbps
M

TX Rate/RX Rate

2500/2500
550
Multi mode fiber

50/125m MMF

3. Electrical Interface Characteristics

Parameter
Transmitter
Total Supply Current
Transmitter Disable Input-High
Transmitter Disable Input-Low
Transmitter Fault Input-High
Transmitter Fault Input-Low
Receiver
Total Supply Current
LOSS Output Voltage-High
LOSS Output Voltage-Low

Symbol

Min.

ICC
VDISH
VDISL
VTxFH
VTxFL

2
0
2
0

ICC
VLOSH
VLOSL

Typ.

2
0

Max.

Unit

Note

A
Vcc+0.3
0.8
Vcc+0.3
0.8

mA
V
V
V
V

mA
V
V

Vcc+0.3
0.8

Notes:
1. A (TX) + B (RX) = 260mA (without termination circuit)

4. Transmitter Specifications - Optical

Parameter
Average Output Power
Extinction Ratio
Center Wavelength
Spectrum Bandwidth(RMS)
Transmitter OFF Output Power
Differential Line Input Impedance
Jitter P-P
Output Eye Mask

Symbol
POUT
ER
C

POff
RIN
tJ

Min.
-10
8.2
830

Typ.

Max.
-3

850

90

100

860
0.85
-45
110
0.1

Unit
dBm
dB
nm
nm
dBm
Ohm
UI

Compliant with G.957(class 1 laser safety)

-3-

Note

VCSEL Laser

BO05E856S5
SFP 2.5G 850nm 550M
RoHS Compliant Optical Transceiver

5. Receiver Specifications - Optical

Parameter
Input Optical Wavelength
Receiver Sensitivity
Input Saturation Power (Overload)
LOS Assert
LOS De-assert
LOS Hysteresis

1.

Symbol

IN
PIN
PSAT
PA
PD
PA-PD

Min.
770

Typ.
850

Max.
860
-18

-3
-35
0.5

2.0

-19
6.0

Unit
nm
dBM
dBm
dBm
dBm
dB

Note
1

Notes:
-12
7
Measured with Light source 850nm, ER=9dB; BER =<10 @PRBS=2 -1 non-return-to-zero.

6. SFP to Host Connector Pin Out

Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

1.
2.

3.

Symbol
VEET
TFAULT
TDIS
MOD_DEF(2)
MOD_DEF(1)
MOD_DEF(0)
RS0
LOS
VEER
VEER
VEER
RDRD+
VEER
VCCR
VCCT
VEET
TD+
TDVEET

Name / Description
Transmitter Ground (Common with Receiver Ground)
Transmitter Fault indication
Transmitter Disable
Module Definition 2. Data line for Serial ID.
Module Definition 1. Data line for Serial ID.
Module Definition 0. Data line for Serial ID.
Rate Select 0
Loss of Signal indication
Receiver Ground (Common with Transmitter Ground)
Receiver Ground (Common with Transmitter Ground)
Receiver Ground (Common with Transmitter Ground)
Inv. Received Data Out
Received Data Out
Receiver Ground (Common with Transmitter Ground)
Receiver Power Supply
Transmitter Power
Transmitter Ground (Common with Receiver Ground)
Transmit Data In
Inv. Transmit Data In
Transmitter Ground (Common with Receiver Ground)

Notes:
Circuit ground is internally isolated from chassis ground.
TDis is an input that is used to shut down the transmitter optical output. It is pulled up within the
module with a 4.7k~10k resistor. Its states are:
Low (0 to 0.8V): Transmitter on
(>0.8V, < 2.0V): Undefined
High (2.0 to 3.465V): Transmitter Disabled
Open: Transmitter Disabled
Mod-Def 0,1,2. These are the module definition pins. They should be pulled up with a 4.7k~10k
resistor on the host board. The pull-up voltage shall be VccT or VccR.
Mod-Def 0 is grounded by the module to indicate that the module is present
Mod-Def 1 is the clock line of two wire serial interface for serial ID
Mod-Def 2 is the data line of two wire serial interface for serial ID

-4-

Note
1
2
3
3
3
4
1
1
1

BO05E856S5
SFP 2.5G 850nm 550M
RoHS Compliant Optical Transceiver

4.

LOS is an open collector output, which should be pulled up with a 4.7k~10k resistor. Pull up voltage
between 2.0V and Vcc+0.3V. Logic 1 indicates loss of signal; Logic 0 indicates normal operation. In the
low state, the output will be pulled to
less than 0.8V.

Pinout of Connector Block on Host Board

7. EEPROM Information
The SFP MSA defines a 256-byte memory map in EEPROM describing the transceivers capabilities, standard
interfaces, manufacturer, and other information, which is accessible over a 2 wire serial interface at the 8-bit
address 1010000X (A0h).
Data
Address
0
1
2
3-10
11
12
13
14
15
16
17
18
29

Field Size
(Bytes)
1
1
1
8
1
1
1
1
1
1
1
1

Name of Field

Contents (Hex)

Description

Identifier
Ext. Identifier
Connector
Transceiver
Encoding
BR, Nominal
Reserved
Length (9m) km
Length (9m) 100m
Length (50m) 10m
Length(62.5m)10m
Length (Copper)

Formfactor

1
16

Reserved

1
3
16

Reserved
Vendor OUI

56-59
60-61

4
2

Vendor rev
Wavelength

XX
XX
XX
XX XX XX XX XX XX XX XX
XX
XX
00
XX
XX
XX
XX
XX
00
XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX
00
XX XX XX
XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX
XX XX XX XX
XX XX

62

Reserved

00

30-35
36
37-39
40-55

Vendor name

Vendor PN

-5-

Transmittter Code
Transceiver Speed
Max. link length in KM
Max. link length in M
Max. link length in M
Max. link length in M
Max. link length in M
Vendor name - OEM

Product Number depending on Part

Vendor revision
Transceiver
Wavelength

BO05E856S5
SFP 2.5G 850nm 550M
RoHS Compliant Optical Transceiver

63

64-65
66
67
68-83

2
1
1
16

Options
BR, max
BR, min

84-91
92
93
94
95

8
1
1
1
1

Vendor date code

Diagnostic type
Enhanced option
SFF-8472

96-255

160

XX

CC BASE

XX XX
XX
XX
XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX
XX XX XX XX XX XX 20 20
XX
XX
XX
XX

Vendor SN

CC_EXT

Checksum of bytes 062

Part serial number

Year, Month, Day
Diagnostics
Diagnostics
Diagnostics
Checksum of bytes 6494

Vendor Specific

8. Digital Diagnostics / Digital Optical Monitoring

The transceiver provides serial ID memory contents and diagnostic information about the present
operating conditions by the 2-wire serial interface (SCL, SDA).
The diagnostic information with internal calibration or external calibration are all implemented,
including received power monitoring, transmitted power monitoring, bias current monitoring, supply
voltage monitoring and temperature monitoring.

9. Recommended Interface Circuit

-6-

BO05E856S5
SFP 2.5G 850nm 550M
RoHS Compliant Optical Transceiver

10. Mechanical Specifications (Unit: mm)

Contact Information
CBO GmbH
Friedhofstrae 25
45478 Mlheim an der Ruhr
Germany
Tel.:
Fax.:
eMail:
web:

0049 208 777 247 - 0

0049 208 777 247 - 99
[email protected]
www.cbo-it.de

-7-