Scribd Logo
Upload

Welcome to Scribd!

  • 82 views

    TP177 Programing

    Uploaded by

    Ahmed Hebeshe
    This document provides steps to upload a program to a Touch screen TP177B color touchscreen using an Ethernet connection. The steps include connecting an Ethernet cross cable between the touchscreen and computer, configuring the touchscreen's IP address in the onboard settings, configuring the computer's IP address, and using WinCC Flexible 2007 or 2005 software to transfer a .hmi program file to the touchscreen via Ethernet. The process involves 13 steps to set up the network connection and transfer the program.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TP177 Programing

    Uploaded by

    Ahmed Hebeshe
    82 views13 pages
    This document provides steps to upload a program to a Touch screen TP177B color touchscreen using an Ethernet connection. The steps include connecting an Ethernet cross cable between the touchscreen and computer, configuring the touchscreen's IP address in the onboard settings, configuring the computer's IP address, and using WinCC Flexible 2007 or 2005 software to transfer a .hmi program file to the touchscreen via Ethernet. The process involves 13 steps to set up the network connection and transfer the program.

    Original Description:

    programming of tp 177 from siemns HMI

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides steps to upload a program to a Touch screen TP177B color touchscreen using an Ethernet connection. The steps include connecting an Ethernet cross cable between the touchscreen and computer, configuring the touchscreen's IP address in the onboard settings, configuring the computer's IP address, and using WinCC Flexible 2007 or 2005 software to transfer a .hmi program file to the touchscreen via Ethernet. The process involves 13 steps to set up the network connection and transfer the program.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    82 views13 pages

    TP177 Programing

    Uploaded by

    Ahmed Hebeshe
    This document provides steps to upload a program to a Touch screen TP177B color touchscreen using an Ethernet connection. The steps include connecting an Ethernet cross cable between the touchscreen and computer, configuring the touchscreen's IP address in the onboard settings, configuring the computer's IP address, and using WinCC Flexible 2007 or 2005 software to transfer a .hmi program file to the touchscreen via Ethernet. The process involves 13 steps to set up the network connection and transfer the program.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 13

    Program uploading for Touch screen TP177B color (Ethernet mode)

    For change this program is needed:

    1-Ethernet cross wire.

    2-Siemens

    WinCC Flexible 2007 or WinCC Flexible 2005 SP1 HF7 software

    3-Computer

    with Ethernet port.

    Procedure

    1-Connect the Ethernet cross wire between the touch screen and computer.

    Ethernetport

    2-Disconnect the power supply of touch screen, wait 5 seconds and reconnect, after 20 seconds touch screen shows the
    follow menu.(This menu runs only 3 or 4 Seconds), press Control panel.

    PressControl
    panel

    3- Double click in transfer.

    Doubleclick
    inTransfer

    4-The next screen appears, tilt and set the options like the next example. And press the button advance.

    Setthisoptions
    PressAdvanced

    5-In the next screen press onboard LAN Ethernet Driver after this press properties

    Setthisoption

    PressProperties

    6-In the next screen tilt Specify an IP address and set IP address 192.168.56.198 And set Subnet Mask 255.255.255.0.

    7-Press OK in all the screens until the next screen (see picture), and double click in OP.

    Doubleclick
    inOP

    8-Press the button Device.

    PressDevice

    9-Press the button Reboot and yes

    Press
    Reboot

    10-The touch screen start to reboot, after 20 second appear the Loader menu. Press Transfer in the screen appear the
    message connecting to host.

    PressTransfer

    The touch screen settings are finished.

    11-Computer Settings.

    You must to set in the Lan -internet properties The IP address 192.168.56.196 And the Subnet mask 255.255.255.0
    (Note that the IP address in the touch screen is not the same than the IP address in the computer).

    Disconnect and reconnect the Ethernet wire and wait that the computer Recognize the connection. And
    ready, the touch screen is connected.

    12-Start the WinCC Flexible Program clicking in the .hmi touchscreen program file, and set in transfer the Ethernet
    mode and the IP address 192.168.56.198 ( the same IP address than the touchscreen).

    13- Set the parameters of the transfer. And click in transfer in order to start the transferring.

    You might also like