Scribd
Upload
52 views24 pages

Step 1: - Create A New File

The document outlines 46 steps to create a 3D model using sketch and extrusion tools. It involves creating sketches on different planes using rectangles, fillets, arcs and circles then extruding the profiles to create solid features. Holes are added using the hole wizard and various editing tools like mirror, trim are used to finalize the model.

Uploaded by

Jayden Cheah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
52 views24 pages

Step 1: - Create A New File

The document outlines 46 steps to create a 3D model using sketch and extrusion tools. It involves creating sketches on different planes using rectangles, fillets, arcs and circles then extruding the profiles to create solid features. Holes are added using the hole wizard and various editing tools like mirror, trim are used to finalize the model.

Uploaded by

Jayden Cheah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 24

STEP 1

-Create a new file.


STEP 2

-Choose a Part and click OK.

STEP 3

-Choose a drawing plane and select a Center Rectangle.


STEP 4

-Choose a bottom plane and select a Center Rectangle.

STEP 5

-Draw a Center Rectangle.


STEP 6

-Adjust a Center Rectangle parameters with 70.00mm.

STEP 7

-Done a Center Rectangle and choose a Sketch Fillet.


STEP 8

-Adjust a Sketch Fillet with 10.00mm.

STEP 9

-Done a Sketch Fillet.


STEP 10

-Choose a Center Rectangle.

STEP 11

-Draw a Center Rectangle at a center.


STEP 12

-Adjust a Center Rectangle parameters with 49.50mm.

STEP 13

-Done a Center Rectangle and choose a Sketch Fillet.


STEP 14

-Adjust a Sketch Fillet parameters with 9.00mm.

STEP 15

-Done a Sketch Fillet.


STEP 16

-Choose a 3 Point Arc Slot.

STEP 17

-Draw a 3 Point Arc Slot.


STEP 18

-Choose a Mirror Entities.

STEP 19

-Draw a slot line at the center.


STEP 20

-Done a Mirror Entities.

STEP 21

-Choose a Trim Entities to trim the 3 Point Arc Slot.


STEP 22

-Done a Trim Entities.

STEP 23

-Choose Extruded Boss/Base.


STEP 24

-Done a Extruded Boss/Base.

STEP 25

-Turn to the top plane and choose the 3 Point Arc Slot.
STEP 26

-Draw a 3 Point Arc Slot.

STEP 27

-Choose a Mirror Entities.


STEP 28

-Draw a slot line at the center.

STEP 29

-Done a Mirror Entities.


STEP 30

-Done a 3 Point Arc Slot.

STEP 31

-Select a Extruded Boss/Base.


STEP 32

-Done Extruded Boss/Base.

STEP 33

-Turn to the bottom plane and choose Line to draw.


STEP 34

-Done a rectangle at the center.

STEP 35

-Choose Sketch Fillet.


STEP 36

-Adjust a Sketch Fillet with 3.34mm.

STEP 37

-Done a Sketch Fillet.


STEP 38

-Choose Extruded Boss/Base.

STEP 39

-Done a Extruded Boss/Base.


STEP 40

-Turn to the top plane and click the left side Sketch11 to find the 3 point Arc Slot middle
point and choose the Circle to draw.
STEP 41

-Draw a circle at the 3 point Arc Slot middle point to be a making point.

STEP 42

-Done a Circle be a making point and choose a Hole Wizard.


STEP 43

-Adjust a Hole Type(Standard and Type),Hole Specification(Size),End Condition(Blind and


Blind2)and Options(Choose Tap Drill Diameter, click Thread Class=2B and click Near Side
Countersunk=adjust Near Side Countersunk Diameter with 6.56mm).
STEP 44

-Adjust a Hole Position at the making point.

STEP 45

-Done a Hole Wizard.


STEP 46

-Finish a object drawing.

You might also like