Syllabus & Scheme For M.Tech. (ECE)
Syllabus & Scheme For M.Tech. (ECE)
Syllabus & Scheme For M.Tech. (ECE)
M.Tech. (ECE)
First Semester
Subject
Code
Subject
Credit(L-T-P)
4 (4-0-0)
Marks
Theory
(Ext.)
60
Weightage
Sessional
(Int.)
40
E501C
E503C
4 (4-0-0)
60
40
E505C
4 (4-0-0)
60
40
E507C
Information &
Communication Theory
4 (4-0-0)
60
40
E509C
1 (0-0-2)
20
30
E511C
1 (0-0-2)
20
30
E513C
1 (0-0-2)
20
30
Total:
19 (16-0-6)
300
250
Second Semester
Subject
Code
Subject
Credit(L-TP)
Marks Weightage
Theory Sessional
(Ext.)
(Int.)
E502C
E504C
E506C
4 (4-0-0)
4 (4-0-0)
4 (4-0-0)
4 (4-0-0)
1 (0-0-2)
1 (0-0-2)
1 (0-0-2)
19 (16-0-6)
60
60
60
60
20
20
280
40
40
40
40
30
30
50
270
Marks
Theory
(Ext.)
60
60
60
60
20
80
340
Weightage
Sessional
(Int.)
40
40
40
40
30
120
310
E518C
E520C
E522C
Third Semester
Subject
Code
Subject
Credit(L-T-P)
E601C
E603C
E605C
4 (4-0-0)
4 (4-0-0)
4 (4-0-0)
4 (4-0-0)
1 (0-0-2)
4 (0-0-8)
21 (16-0-10)
Digital Communication
E617C
E619C
MATLAB
Minor Project
Total:
Fourth Semester
Subject code
Subject
Credit (L-T-P)
E702C
Dissertation
12 (0-0-24)
12 (0-0-24)
Total:
Marks Theory
(Ext.)
200
200
Weightage
Sessional (Int.)
300
300
*The students will have to select subject from list of electives as given
below :
ELECTIVE I
CODE
E508C
E510C
E512C
E514C
E516C
SUBJECT
VLSI
Nano Technology
Data Structure & Programming Language
Multimedia System
Statistical Method
ELECTIVE II
CODE
E607C
E609C
E611C
E613C
E615C
SUBJECT
Image Processing
Neural Networks And Fuzzy Logic
Embedded System
Advanced Mathematics for Engineers
Semiconductor Device Modeling
LTP
4--
Unit 1
Design of basic microprocessor architectural Concepts :Microprocessor architecture, word Lengths,
addressable memory, Microprocessor's speed architectural characteristics, registers, instruction,
memory addressing architecture ,ALU, GPR's Control logic & internal data bus.
Unit 2
Microprocessor Instructions &Communication: Instruction Set ,Mnemonics, Basic Instruction Types ,
Addressing modes ,Microprocessor I/O connecting I/O put to Microprocessor ,Polling and Interrupts,
Interrupt and OM. Controllers.
Unit 3
Microcontroller: Introduction 8051 architecture and programming model. Internal RAM and registers,
I/O ports, Interrupt system &Instruction sets.
Unit 4
Advanced Micro processors: lntel X86 family of advanced Microprocessor, programming model for 86
family. X86 addressing modes, instruction set, hardware of 186, 286, 386, 486 & Pentium processors.
Motorola 68 XXX family of microprocessor, 68 XXX addressing modes, instruction set, hardware.
Unit 5
Microprocessor 110: Data Communication, parallel I/O serial communication, Serial interface and UART,
modems, I/O devices, D/A,A/D interface, special I/O devices.
Unit 6
Developing Microprocessor Based Products: Introduction to the Design Process, Preparing the
specifications, Developing a design, Implementing and Testing and design, Regulatory Compliance
Testing, design tool for Microprocessor Development.
Text Books:
1. C.M. Gilmore, "Microprocessors Principals and Application", MGH
2. Rajkamal, "Embedded System, Architecture &Programming",TMH
Reference Books:
1. Berry B. Berry, " Inter Series of microprocessors", PHI
2. D. V. Hall, "Microprocessor &Interfacing", TMH
3. Peatman, "Microprocessor Based System Design", Pearson
LTP
4--
Unit 1
Introduction: Satellite communication, Brief History.
Unit 2
Orbits of satellite: Low, medium and Geo synchronous mam characteristics, Angle period,
Returningperiod, Angle of Evaluation, Propagation Delay, Orbital Spacing.
Unit 3
Satellite Links: Delay transponders, Earth Stations, Antennas and Earth coverage, Altitude andeclipses.
Unit 4
Earth space propagation effects: Frequency window, Free space loss, Atmospheric absorption,Rainfall
Attenuation, Ionospheric scintillation, Telemetry, Tracking and command of satellites.
Unit 5
Detection: QPSK offset QPSK and MSK. Coherent and non-coherent detection, Error rateperformance.
Unit 6
Synchronization: Principle and techniques, Multiple Access Techniques, FDMA, SPADE system,TDMA
system, concept and configuration, system timing frames format, SSMA-Basu Principles,YSAT, Random
access, space communication, link design description of operational in TELSAT and INSAT system.
Text Books:
1. J. Martin: Communication Satellite System, PH Englewood.
2. D.C.Aggarwal: Satellite Communication, Khanna Publishers.
Reference Books:
1. Tri Ha Digital Satellite Communication Tata McGraw Hill.
2. Harry and Yam Trees: Satellite Communication, IEEE Proceedings, 1979.
LTP
4--
Unit 1
Introduction to Data Transmission: Overview of Data Communication and networking, Analog and Digital
Data Transmission, Transmission Impairments, Various Transmission Media, Data Encoding.
Unit 2
Digital Data Communication Techniques: Asynchronous And Synchronous Transmission, Error Detection
and correction techniques, Physical interfaces
Unit 3
Data Link Control: Link Configurations, Protocol principles (Error control, Flow control), Bit Oriented and
character oriented protocol, Data link layer services, Link Control.
Unit 4
Multiplexing: F.D.M. Synchronous TDM, Statistical TDM
Unit 5
Communication Networking Techniques: Communication Networks, Circuit Switching, Message
Switching, Packet Switching, Local Networking Technology, The bus / tree topology, the ring topology,
Medium Access control protocols (CSMAlCD, Token ring, FDDI, DQDB).
Unit 6
Computer Communication Architecture: OSI and TCP/IP Model, Protocol And Architecture, Networking
Access protocols, Inter Networking, Transport layer Protocols,
Session Service And Protocols, and Presentation! Application protocols
Unit 7
ISDN Networks: Concepts &Architecture, Protocols
Text Books:
1. William Stallings, "Data and Computer Communication", PHI, 4th Ed.
2. Forouzan, "Data communications and networking",TMH
Reference Books:
1. Andrew Tanenbaum, "Computer Networking", PHI
2. Godbole, "Data communications and network", TMH
LTP
4--
Unit 1
Information Theory: Concept of Information and Entropy, Shanon's theorems, Channel Capacity Self
information, Discrete and Continuous entropy, Mutual and joint information, Redundancy.
Unit 2
Coding Theory: Source encoding &channel encoding, Error detection & Correction, Various codes for
channel coding, Rate Distortion functions.
Unit 3
Codes used in Information Theory: Linear block codes, systematic linear codes& optimum coding for
Binary symmetric channel, The Generator & parity check matrices, Syndrome decoding & Symmetric
channels, Hamming codes, Weight enumerator, Perfect codes, BCH codes, Idempotent &Mattson
Solomon polynomials, Reed Solomon codes, Justeen codes, MDS codes & generalized BCH codes,
Convolution codes & Viterbi decoding algorithm.
Unit 4
Performance of codes: Performance of linear block codes & convolution codes, code incurable error
probability Upper & lower bounds.
Text books:
1. Blahut R.E., Theory and practice of error control codes, A WL1983.
2. Wilson, Digital Modulation and coding, Pearson
Reference Books:
1. B.P. Lathi, Communication System, Oxford
2. Ranjan Bose, Information Theory, Coding & Cryptography, TMH
3. Dass. , S.K. Malik & P.K. Chatterjee, Principles of digitals communication
L T P
_ _ 2
L T P
_ _ 2
L T P
_ _ 2
LTP
4--
Unit 1
Introduction of DSP: Introduction to Signal Processing, Discrete Linear Systems, superposition Principle,
Unit-Sample response, stability &causality Criterion.
Unit 2
Fourier Transform &inverse Fourier transform: Frequency domain design of digital filters, Fourier
transform, use of Fourier transform in Signal processing. The inverse fourier transform, Sampling
continuous function to generate a sequence, Reconstruction of continuous time signals from Discretetime sequences.
Unit 3
DFT &FFT &Z transform with Applications: Discrete Fourier transform, properties of DFT, Circular
Convolution, Fast Fourier Transform, Realizations of OFT. The Z transform, the system function of a
digital filter, Digital Filter implementation from the system function, the inverse Z- transform, properties
&applications, Special computation of finite sequences, sequence of infinite length &continuous time
signals, computation of fourier series &time sequences from spectra.
Unit 4
Digital Filter Structure &Implementation: Linearity, time- invariance &causality, the discrete convolution,
the transfer function, stability tests, steady state response, Amplitude &Phase characteristics,
stabilization procedure, Ideal LP Filter, Physical reliability &specifications.FIR Filters, Truncation
windowing &Delays, design example, IIR Filters: Review of design of analog filters &analog frequency
transformation. Digital frequency transformation. Design of LP filters using impulse invariance method,
Bilinear transformation, Phase equalizer, digital all pass filters.
Unit 5
Implementation of Filters: Realization block diagrams, Cascade ¶llel realization, effect of infiniteword length, transfer function of degree 1&2, Sensitivity comparisons, effects of finite precision
arithmetic on Digital filters.
TextBooks
1. Alam V. Oppenheim &Ronald W. Schafer, "Digital Signal Processing" PHI.
2. JG Proakis, "Digital Signal Processing", (PHI) 3rd Edition.
Reference Books
1. Rabiner&Gold, "Theory &application of digital Signal Processing", PHI 1992. 2.
Roman kuc, "Introduction to Digital Signal Processing," McGraw hill Edition.
2. Roman Kuc, Introduction to Digital Signal Processing, McGraw hill Edition
OPTICAL COMMUNICATION
EC-504C
LTP
4--
Unit 1
Introduction: General Communication system, Elements of fiber communication link, Advantages and
disadvantages of optical fiber communication ,Application of optical fiber communications, limitation of
optical fiber communications
Unit 2
Optical fiber cross section and index profile, propagation of light wave in optical fiber, Ray theory and
electromagnetic mode theory for optical propagation, step index and graded index fibers, critical angle,
Acceptance angle, Numerical Aperture.
Unit 3
Attenuation, Material Absorption, scattering losses (Rayleigh Scattering),Fiber bend losses, Core and
Cladding losses, Dispersion in optical fiber, Intermodal dispersion, Intermodal dispersion , pulse spread
by material dispersion ,dispersion shifted and dispersion flattered fiber.
Unit 4
Optical Sources: Principal of light emitting diode (LED), LED Power and Efficiency, Characteristic of LED ,
LASER , Basic concept: Absorption and Emission of Radiation, population inversion , spontaneous
emission , Efficiency of LASER ,Laser to fiber Coupling ,Advantages of LASER over LED.
Unit 5
Optical Detector: Principal for optical detection ,Characteristics of Photo Detectors , P.N Photo Diodes ,
P.I.N Photo Diodes, Response time of photodiode , Avalanche photodiode , Silicon Reach through
Avalanche photodiode, Multiplication factor , Noise in APD.
Unit 6
Introduction of optical communication system , Drive circuits for LED operation , Drive circuits for LASER
operation, Optical receiver , Preamplifier , Automatic gain control ,Link power Budget ,Rise time budget,
Homodyne and heterodyne detection ,Phase diversity receiver ,Optical TDM ,WDM.
Text books :
1. John Gowar, "Optical Communication Systems", PHI.
2.Gerd Keiser, "Optical Fiber Communication", TMH
Reference Books:
1. Franz JH & Jain VK, "Optical Communication", Narosa Pub Ins
2. John M. Senior, "Optical Communication", PHI
LTP
4--
.
Unit 1
Introduction to mobile radio systems: Paging systems, cordless telephone system, Cellular
telephonesystems- Cellular concept, frequency reuse, channel assignment strategies, Interference and
systemcapacity, trunking and grade of service, cell splitting, sectoring, microcell zone concept, HO
Strategies.
Unit 2
Mobile radio propagation: mechanism, free space path loss, log-distance path loss models,
Okumaramodel, Hata model, PCS model, Wideband PCS microcell model, indoor propagation models,
Jake'schannel model, Multi path characteristics of radio waves, signal fading, Time dispersion,
Dopplerspread, coherence time LCR, fading statistics, diversity techniques.
Unit 3
Introduction to spread spectrum communication, multiple access techniques used in mobile
wirelesscommunication: FDMAffDMA/CDMA, Cellular CDMA, packet radio protocols, CSMA,reservation
protocols, capacity of cellular CDMA, soft HO.
Unit 4
Wireless systems and standards: GSM standards, signaling and call control, mobility
management,location tracing, wireless data networking, packet error modeling on fading channels,
Performanceanalysis of link and transport layer protocols over wireless channels, mobile data
networking(mobile IP), wireless data services, IS-95, GPRS.
Text Books:
1. T. S. Rappaport, "wireless Communications: Principles and practices", PHI 1996.
2.William C. Y. Lee, " Mobile Cellular Telecommunications, Analog and Digital Systems", 2nd ed,
MGH-1995.
Reference Books:
1. Kaveh Pahlavan & Allen H. Levesque, "Wireless Information Networks", Wiley series
inTelecommunications and signal processing.
2. Kamilo Feher: Wireless Digital communications, Modulation and Spread SpectrumApplications PHI
2001.
VLSI (E508C)
UNIT I REVIEW OF MOS TECHNOLOGY
Evolution of VLSI technology, VLSI Design Flow, Basic MOS Transistor: Enhancement and depletion
mode, MOS structure, NMOS, PMOS and CMOS fabrication.
UNIT II ELECTRICAL PROPERTIES OF MOS
Threshold voltage, MOSFET current voltage characteristics, second order effects, MOS inverters: VTC
characteristics of NMOS inverter, CMOS inverter and Bi-CMOS inverter. Noise margins, Latch-up in
CMOS circuits.
UNIT III DESIGN PROCESS
Physical design of simple and complex logic gates using NMOS and CMOS technology, Stick diagrams,
NMOS Design Style. CMOS Design Style, Lambda based Design Rules. Layout.
UNIT IV MOS TRANSISTOR SWITCHING CHARACTERISTICS
Sheet resistance, area capacitance, inverter delay. Switching power dissipation of CMOS inverters.
UNIT V DYANAMIC LOGIC CIRCUITS
CMOS Logic Structure: Complementary CMOS Logic, Pseudo NMOS Logic, Dynamic CMOS Logic, CMOS
Domino Logic, Clocked CMOS Logic, Pass Transistor Logic, CMOS transmission gate Logic
UNIT VI SCALING OF MOS CIRCUITS
Scaling models, scaling factor for device parameters, Advantages and Limitations of scaling.
UNIT VII SUBSYSTEM DESIGN
Architectural issues in VLSI, Design of CMOS parity generator, Multiplexer, n-Bit Comparator,
Incrementer/Decrementer, ALU subsystem.
TEXT BOOKS:
1. Kang and Leblebici CMOS Digital integrated circuits TMH 2003.
2. Pucknell D.A and Eshrachain K. Basic VLSI Design Systems & circuits(PHI)
3. Introduction to Digital Circuits: Rabaey (PH)
NANO TECHNOLOGY
E510C
L T P
4 - -
Unit 1
Atomic structure: Basic crystallography, Crystals and their imperfection, Diffusion, Nucleation
and crystallization, metals, Semiconductor & Insulators, Phase transformation, Ceramic
materials.
Unit 2
Physical properties of materials: Electrical &Thermal properties, Optical properties of material,
magnetic properties of materials,Density of state,Coulomb blockade, Kondo effect, Hall
effect,Quantum hall Effect.
Unit 3
Nanostructure:Introduction to Nanotechnology, Zero dimensional Nanostructure Nano
particles, One Dimensional Nanostructue Nano wires & Nano rods, Two Dimensional Nano
structure-Films, Special Nano materials, Nano structures fabricated by physical techniques,
Properties of Nano materials,application of Nano structure, Basics of Nano Electronics.
Unit 3
Characterization of Nano materials: SPM Techniques Scanning Tunneling Microscopy,Atomic
force Microscopy, Magnetic force Microscopy, Electron Microscopy Scanning Electron
Microscope, Transmission Electron Microscope.
Reference Books:
1.
2.
3.
4.
:
:
:
:
C .Kittel
H.M. Roenberg
Joel I. Gersten
Bharat Bhushan
L T P
4 - -
Unit 1
Re C/C++ : fundamentals, expressions, selection statements, loops, functions, recursive
functions, pointers, introduction to OOPS ; encapsulation, excess modifiers, polymorphism,
inheritance overriding methods, abstract classes.
Unit 2
Fundamental Notation: Primitive and Composite data type, time and space complexity.
Unit 3
Data Structure: Stacks, queues, arrays, linked list, trees and graphs.
Unit 4
File Structure: Indexing structure like B-trees, ISAM, hashing technique for direct method files,
inverted list, Multilist.
Unit 5
Sorting: Internal and external sorts, searching techniques, merging algorithm.
MULTIMEDIA SYSTEMS
E514C
L T P
4 - -
Unit 1
Introduction: Concept of Multimedia, Emerging Applications, Multimedia Systems and
Appliances.Distributed Multimedia Systems, Synchronization, Orchestration and QOS Architecture
standards.
Unit 2
Digital audio representation and processing: Audio in computer applications, its digitalrepresentation,
transmission and digital processing, speech recognition and generation.
Unit 3
Digital video and image compression: Video compression techniques and standardization of algorithms,
JPEG, MPEG, DVI technology.
Unit 4
Multimedia Information Systems: Workstation OS, New OS support, Real Time Mach, Multimediasystem
service architecture, Media Stream Protocol, service and window system, client control ofcontinuous
media, Hyper applications. Multimedia Information systems, File system support, DataModels.
Unit 5
Multimedia communication systems: Public Network services and N/W Protocols, Quick timeMovie File
(QMF), format, OMFI, MHEG, Format function Real time Interchange, Track Modeland Object Model
Teleconferencing systems, Shared Amlication Architectures, EmbeddedDistributed objects, Multimedia
conferencing architecture, architecture of team workstation.
Unit 6
Multimedia and Internet: The internet, client server technology, Communication Protocols, Internet
Addressing, WWW, HTML, and Web Authorizing, Web page browsers and development,bandwidth .and
applications considerations, Design Considerations for Web pages, AccessingContent on internet
TextBooks:
1 John F. KoegelBufod, "Multimedia Systems", Addison Wesley, Edition. 2000
2.David Hillman, "Multimedia Technology and Application", Galgotia Publication - Edition 1998.
Reference Books:
1. Fred Halsall, "Multimedia Communications", Pearson
2. Rao, Bojkovic&Milovanovic, "Multimedia Comm. System: Techniology , Std. & Network", PHI
STATISTICAL METHODS
E516C
L T P
4 - -
Unit1
Random variables and distribution function. Probability mass and probability density function, Two
dimensional random variables: joint, Marginal and conditional distributions, Independence of random
variables. Moments, Expectation, Variance covariance, conditional expectation.
Unit 2
Probability generating and Moment generating functions, Characteristic function.Inversion and
uniqueness theorems of characteristic function.
Unit 3
Probability distributions; Binominal, Poisson, Geometric, Negative Binomial, Uniform, Exponential, Beta,
Gamma, Weibull and Normal
Unit 4
General/Stochastic Process, definition, classification and examples, compound distribution, Random
walk Gambler's ruin problem.
Unit 5
Markov chains, higher transition probabilities. Classification of states and chain, determination of higher
transition probabilities, Stability of Markov systems, limiting behavior.
Unit 6
Poisson process and related distribution, Generalization of Poisson process.Birth process. Generalized
Birth death processes, Linear Birth death processes.
Unit 7
Queueing systems, general concepts, Queueing models IMIM/l, MIMIl/R, MIMIC, MIM/<XJ, MIM/C/C,
MlEkmodels. Machine interference problem.
TEXTBooks:
1. Bailey, N.T.J: Elements of Stochastic Process
2. K.S Trivedi : Probability and Statistics, PHI, 3rdedition
Reference Books:
I. Medhi, J , New International publication
2. Bhatt B.R, Stochastic models
3. Kashyap, B.R.K and Chaudhary, M.L.: An introduction to Queuing Theory
LTP
4--
Unit 1
Review of Digital Electronics concept
Unit 2
MSI and LSI Circuits And Their Applications: Arithmetic Circuits, Comparators, Multiplexers, Code
Converters, XOR And AND-OR INVERTER Gates, Wired Logic, Bus Oriented Structures, Tri-State Bus
System, Propagation Delay.
Unit 3
Sequential Machines: The Concept Of Memory, The Binary Cell, The Cell And The Bouncing Switch, Set I
Reset, D, Clocked T, Clocked JK Flip Flop, Design Of Clock FIF, Conversion, Clocking Aspects, Clock Skew,
State Diagram Synchronous Analysis Process, Design Steps For Traditional Synchronous Sequential
Circuits, State Reduction, Design Steps For Next State Decoders, Design Of Out Put Decoders, Counters,
Shift Registers and Memory.
Unit 4
Multi Input System Controller Design: System Controllers, Design Phases And System Documentation,
Defining The System, Timing And Frequency Considerations, Functional, Position And Detailed Flow
Diagram Development, MDS Diagram, Generation, Synchronizing Two System And Choosing Controller,
Architecture, State Assignment, Next State Decoders And Its Maps, Output Decoders, Clock And Power
Supply Requirements, MSI Decoders, Multiplexers In System Controllers, Indirect Addressed
Multiplexers Configurations, Programmable System Controllers, ROM, PLA And PAL Based Design.
Introduction to the CPLD &FPGA.
Unit 5
Asynchronous Finite State Machines: Scope, Asynchronous Analysis, Design Of Asynchronous Machines,
Cycle And Races, Plotting And Reading The Excitation Map, Hazards, Essential Hazards Map Entered
Variable, MEV Approaches To Asynchronous Design, Hazards In Circuit Developed By MEV Method.
Text Books:
1. Fletcher, "An Engineering Approach to Digital Design" PHI 1990
2. Z. Kohavi, "Switching and Finite Automata Theory", TMH
Reference Books
1. Markovitz, "Introduction to Logic Design", TMH
2. Mano, "Digital Design", PHI
DIGITAL COMMUNICATION
E603C
LT P
4 - Unit 1
Analog to Digital Conversion: Sampling Theorem, Pulse Amplitude Modulation, Channel bandwidth for
PAM signal, Natural sampling, Flat top sampling, quantization of signals, Quantization error, Pulse Code
Modulation (PCM), The PCM system, Companding, Multiplexing PCM signals, Differential PCM, Delta
Modulation, Adaptive Delta Modulation.
Unit 2
Digital Baseband Transmission : A baseband digital communication system, Digital Data formats, Line
coding and its properties,Various PAM formats or line codes, Unipolar RZ and NRZ, Polar RZ and NRZ,
Bipolar NRZ, Split Phase Manchaster format, Polar Quanternary NRZ format, The Optimum filter,
Matched Filter, Calculation of Probablity of error for matched filter, Intersymbol Interference(ISI), Cause
of intersymbol interference, Nyquists criterion for distortion less baseband binary transmission.
Unit 3
Signal Space Analysis : Concept of Additive White Gaussian Noise(AWGN) Channel, Concept of Optimum
Receiver, Geometric representation of signals, Gram Schmidt Orthogonalisation procedure.
Unit 4
Digital Modulation Techniques : Coherent binary modulation techniques, Coherent binary amplitude
shift keying, Binary Phase Shift Keying(BPSK), Coherent Binary Frequency Shift Keying (BFSK),
Noncoherent binary modulation, Differential Phase Shift Keying (DPSK), Quadrature Phase Shift Keying
(QPSK), Minimum shift Keying (MSK), Calculation of probability of error of BPSK, BFSK, QPSK,
Relationship between bit error rate, symbol error rate, Comparison of modulation techniques.
Text Books:
1. Taub and Schilling, Principal of Communication System,TMH
2. S.Haykin, Digital communication,Willey Pub.
Reference Books:
1. WayenTomasi, Electronic Communication System ,Pearson pub.
2. J.Dass, S.K.Mullick& P.K. Chatterjee, Principal of Digital Communication , Willey Eastern Pub
Reference Books
1. Network Security Essentials: Application and standard, William Stalling(Third edition)
2. Computer network and data communication by Frozen
IMAGE PROCESSING
E607C
L T P
4 - -
Unit 1
Introduction: Elements of Storage, Processing Communication Display.
Unit 2
Digital Image Fundamentals: Visual Perception, simple image models, concept of uniform and
nonuniform sampling &quantization, Relationships between pixels-neighbors of pixel, connectivity
labeling of connected components. Relations, equivalence and Transitive closure, Distance measures,
Arithmetic/ Logic operation, Imaging Geometry Basic and perspective transformation stereo imaging.
Unit 3
Image Transforms: Discrete Fourier transform, 2-D Fourier Transforms and its properties. Fast Fourier
transform and its uses. Walsh, Hadamard Discrete cosine, Heir and slant transforms hostelling their
algorithms and computer implementations.
Unit 4
Image Enhancement: Spatial and frequency domain methods point processing, intensity transformation,
Histogram processing image substation and Averaging spatial filtering, LP, HP and homo-morphic felling,
generation of spatial marks, Color image processing.
Unit 5
Image Restoration: Degradation model, digitalization of circulate and block circulate metrics, Algebraic
approved invoice filtering, wiener filter, constrained least square restoration, Interactive restoration in
spatial domain geometric transformation.
Unit 6
Image Compression: Redundancy models, error free compression, Lossy compression, Image
compression standards.
Unit 7
Image Segmentation: Detection of Discontinuity, Edge detection, Boundary detection, Thresholding,
Regional oriented segmentation use of motion in segmentation.
Unit 8
Representation and Description: Image analysis, Pattern and their classes, Decision theoretical methods,
Structural methods, Interpretation.
TextBooks:
I. Anil K Jain, "Fundamentals of Digital Image Processing", PHI Edition 1997.
II. Keenneth R Castleman, " Digital Image Processing", Pearson
Reference Books:
III. Rafael C. Gonzalez and Richard E. Woods, "Digital Image Processing", Pearson 2.Chanda&Majumder,
"Digital Image Processing &Analysis", PHI
EMBEDDED SYSTEMS
E611C
L T P
4 - -
Unit 1
Introduction to embedded system : Background and History of Embedded System, Defination and
Classification, Programming language for embedded system: desirable characterstic of programming
language for embedded system, low-level versus high-level language, main language implementation
issue : control, typing. Major programming languages for embedded systems.Embedded System on a
Chip (SOC) and the use of VLSI designed circuits.
Unit 2
Processor and Memory Organization : Structural units in processor, Processor selection for an
embedded system, Memory devices, Memory selection, Allocation for memory to program segments
and blocks and memory map of a system, DMA, Interfacing Processor. I/O Devices-Device I/O types and
examples V Synchronous Iso-synchronous and Asynchronous Communication from serial devices
Examples of internal serial-communication devices UART and HDLC Parallel Port Devices
Sophisticated interfacing features in Device/ports Timer and Counting Device.
Unit 3
Microcontroller : Introduction to microcontrollers, Evolution, Microprocessors vs Microcontrollers,
MCS-51 Family Overview, Important Feature, Architecture. 8051 Pin functions,Architecture, Addressing
Modes, Instruction set, Instruction Types.
Unit 4
Programming : Assembly Programming . Timer Registers, Timer modes, Overflow flags, clocking sources,
timer counter interrupts, baud rate generation. Serial port register, mode of operation,
initialization,accessing, multiprocessor communications, serial port baud rate.
Unit 5
Interrupts:InterruptOrganisation, Processing interrupts, Serial port interrupts, External interrupts,
interrupt service routines. Microcontroller specification, Microcontoller design, testing, timing
subroutines, look up tables, serial data transmission.
Unit 6
Application : Interfacing Keyboards, Interfacing Displays, Interfacing A/D and D/A converters, Pulse
Measurement, Loud Speaker Interface, Memory Interface.
Unit 7
Laboratory work : Implementation using Embedded operating systems like RT Linux,
WindowsCE,Windows XP Embedded, Assembly language for 8051 on Pinnacle.
Text Books:
1.JohnB.Peatman, Design with PIC Microcontroller,Pearson Pub
2. Predko, programming and customizing the 8051 microcontroller , TMH.
Reference Books:
1. Mazidi, The 8051 microcontroller and embedded system ,Pearson Pub.
2. Deshukh, Microcontroller ,TMH.