Scribd Logo
Upload

Welcome to Scribd!

  • 73 views

    JSS 6850-22

    Uploaded by

    Minal Parapannawar
    This document outlines requirements and packaging specifications for inhibitor auto rust and scale products used to prevent corrosion and scale formation in vehicle cooling systems. It specifies materials and packaging methods, including glass bottles, corrugated fiberboard boxes, tapes, and strapping. Bottles must be clearly marked with product information and boxes must be marked with shipping details. Manufacturers must perform quality inspections and provide testing facilities. The product comes with a 12-month warranty against defects in material and performance. Sampling plans and conformity criteria are defined by another specification.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    JSS 6850-22

    Uploaded by

    Minal Parapannawar
    73 views8 pages
    This document outlines requirements and packaging specifications for inhibitor auto rust and scale products used to prevent corrosion and scale formation in vehicle cooling systems. It specifies materials and packaging methods, including glass bottles, corrugated fiberboard boxes, tapes, and strapping. Bottles must be clearly marked with product information and boxes must be marked with shipping details. Manufacturers must perform quality inspections and provide testing facilities. The product comes with a 12-month warranty against defects in material and performance. Sampling plans and conformity criteria are defined by another specification.

    Original Description:

    jss 6850-22

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines requirements and packaging specifications for inhibitor auto rust and scale products used to prevent corrosion and scale formation in vehicle cooling systems. It specifies materials and packaging methods, including glass bottles, corrugated fiberboard boxes, tapes, and strapping. Bottles must be clearly marked with product information and boxes must be marked with shipping details. Manufacturers must perform quality inspections and provide testing facilities. The product comes with a 12-month warranty against defects in material and performance. Sampling plans and conformity criteria are defined by another specification.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    73 views8 pages

    JSS 6850-22

    Uploaded by

    Minal Parapannawar
    This document outlines requirements and packaging specifications for inhibitor auto rust and scale products used to prevent corrosion and scale formation in vehicle cooling systems. It specifies materials and packaging methods, including glass bottles, corrugated fiberboard boxes, tapes, and strapping. Bottles must be clearly marked with product information and boxes must be marked with shipping details. Manufacturers must perform quality inspections and provide testing facilities. The product comes with a 12-month warranty against defects in material and performance. Sampling plans and conformity criteria are defined by another specification.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 8

    MINISTRY OF DEFENCE

    DEFENCE SPECIFICATION
    ON
    REQUIREMENTS AND PACKAGING FOR
    INHIBITOR AUTO RUST AND SCALE
    TO JSS : 6850-22
    (DS CAT NO 6850 000084 )
    DIRECTORATE OF STANDARDISATION
    DEPARTMENT OF DEFENCE PRODUCTION & SUPPLIES
    MINISTRY OF DEFENCE, H-BLOCK, DHQ PO
    NEW DELHI-110 011

    RECORD OF AMENDMENTS
    _____________________________________________________________________________________
    Amendment Amended by Signature
    Amendment pertains to Authority Name and Rank &
    ___________ Sl No/ para No/ (Block letters) Date
    No Date Column No
    _____________________________________________________________________________________

    CONTENTS

    0. FOREWORD
    1. SCOPE
    2. RELATED SPECIFICATIONS
    3. QUALITY
    4. PACKAGING
    5. MARKING
    6. PRE-INSPECTION OF STORES/CONSIGNMENT
    7. QUALITY ASSURANCE
    8. WARRANTY
    9. SAMPLING PLAN AND CRITERRIA OF CONFORMITY
    10. DEFENCE STORES CATALOGUE NUMBER
    11. SUGGESTIONS FOR IMPROVEMENT

    0. 0 FOREWORD

    0. 1 This Defence Specification has been prepared by the Material


    Standardisation Sub-Committee on the authority of Standardisation
    Committee, Ministry of Defence.
    0. 2 This specification has been approved by the Ministry of Defence and is
    mandatory for use by the Defence Services.
    0. 3 This specification has been prepared based on CQA(Materials),Kanpur
    Departmental Specification No. CQA(M) /SS /128 and supersedes the same.
    0. 4 This specification or any drawings, pattern or other information issued in
    connection therewith may only be used for a specific order placed by
    competent authority. It is not to be used for any other purpose whatsoever
    without the expressed written sanction of Directorate of Standardisation or
    his representative.
    0. 5 All clauses in this specification shall be complied with in every respect
    irrespective of the source of supply of the material and or components.
    0. 6 Should any discrepancy be found between this specification and any
    sample or pattern, loaned for any purpose this specification and / or other
    connected specification /or drawings shall be taken as correct.
    0. 7 All the specifications /drawings referred in this specification for any
    tender or contract shall mean the edition current on the date of such
    contract.
    0. 8 Quality Assurance Authority for the item covered in this specification is
    Controllerate of Quality Assurance (Materials) Post Box No 229, Kanpur- 208
    004. Enquiries regarding this specification relating to any contractual
    condition should be addressed to the Quality Assurance Authority named in
    the tender or contract. Other enquiries should be referred to:The Director,
    Directorate of Standardisation
    Ministry of Defence
    H Block DHQ PO
    New Delhi- 110 011.
    0.9 Copies of this specification can be obtained on payment from:The Director,
    Directorate of Standardisation
    Ministry of Defence
    H Block DHQ PO
    New Delhi -110 011

    0. 10 The information contained in this specification is not to be


    communicated either directly or indirectly to the press or any person not
    authorised to receive it.
    0. 11 This specification holds good only for the supply order for which it is
    issued.
    1. 0 SCOPE
    This Defence Specification covers requirements and packaging for
    Inhibitor Auto Rust and Scale suitable for prevention of corrosion and scale
    formation in the cooling system and radiator internal combustion engines
    ( e.g. A & B Vehicles and T-54 and T-55 Tanks ) and for cooling system of
    engines having aluminium alloy cylinder heads also.
    1.1

    2.0 RELATED SPECIFICATIONS


    2.1 Reference in this specification is made to :Sl. No Specification No. Nomenclature
    (i) IS : 1945 Glass Bottle for For Fluid Inks
    (ii) IS : 2771 PT 1: 1990 Corrugated Fibre Board Boxes
    (iii) IS : 10106 Pt 3 Sec 1 Cushioning Materials
    (iv) IS : 13262 : 1992 Pressure Sensitive Adhesive Tapes With Plastic
    Base.
    (v) CIGS/US/282 Strappings Polypropylene
    (vi) IND/SL/ 8900(a) Sampling Plans and Procedures For Inspection of Material
    Stores.
    2.1.1 OTHER APPLICABLE DOCUMENTS
    Sl.No Specification No Nomenclature
    (i) IS : 193 Soft Solder
    (ii) IS : 513 Cold Rolled Carbon Steel Sheet
    (iii) IS : 737 Wrought Aluminium and Aluminium Alloys Sheet & Strip ( For
    General Engineering Purpose)
    (iv) IS : 1070 Water Distilled Quality
    (v) IS : 1115 Cutting Oil Soluble
    (vi) IS : 1972 Copper Plate , Sheet and Strips For Industrial Purpose.
    (vii) IS : 3005 Grey Cast Iron Ingot Moulds Stools and Slag Ladles
    (viii) IS : 1945 Glass Bottle for Fluid Inks
    2.2 Copies of Indian Standard are obtainable on payment from :-

    Bureau of Indian Standards


    Manak Bhavan
    9, Bahadur Shah Zafar Margs
    New Delhi - 110 002
    or
    Their Regional/ Branch Office.
    2.3 Copies of IND/SL and CIGS specifications are available on payment
    from :The Controller
    Controllerate of Quality Assurance( Materials)
    Post Box No. 229
    Kanpur - 208 004
    3.0 QUALITY
    3.1 Materials used for the manufacture of stores shall be of the highest grade
    and shall conform to the latest relevant specifications.
    4.0 PACKAGING
    4.1 MATERIAL
    (i) Bottles - Conforming to IS : 1945 having capacity of 500 ml.
    (ii) Triple Walled - Conforming to IS : 2771 (Part 1) having Bursting
    Corrugated Fibre Board Strength 16 Kg/ cm2 .
    Boxes
    (iii) Cellulose Adhesive Tape - Conforming to IS : 13262 - 1992
    (iv) Cushioning Material - Conforming to IS : 10106 ( Pt 3/ Sec 1)
    (v) Strappings Poly- - Conforming to CIGS/US/282
    Propylene
    4.2 MODE

    4.2.1 500 ml material shall be packed in clear and dry narrow mouth glass
    bottles having screw stoppered Bakelite /pilfer proof aluminium cap with
    airtight inner polythene plug . Cap shall be firmly sealed with cellulose
    adhesive tape.
    18 such bottle shall be first placed in upright position in partitioned
    compartment of triple walled corrugated fibre board boxes. Empty space and
    bottom of the bottle shall be filled up with suitable cushioning material.
    Corrugated boxes shall be firmly secured by pressure sensitive cellulose
    adhesive tape/ BAPP ( Biaxial Polypropylene) tapes and numeroseal of
    smallest convenient size to be affixed fully covering the tape joint. Boxes
    shall be strapped with 12 mm wide polypropylene strapping on two sides
    perpendicular to each other.
    4.3 The packaging shall be clearly marked with Consignees address and
    other necessary details for easy identification of the stores by the Consignee.
    4.4 Additional requirements, if any shall be specified in the contract by the
    purchasing authority.
    5.0 MARKING
    5.1 BOTTELES
    5.1.1 A label printed with the following details shall be affixed to each bottle
    and rendered waterproof by waxing or transparent cellulose adhesive tape :i) Nomenclature of the Stores
    ii) DS Cat No
    iii) Quantity Packed ( e.g. 500 ml)
    iv) Month and Year of Manufacture
    v) Batch No.
    vi) Manufacturers / Suppliers Name or his recognised trade mark
    vii) Other details as per contract.
    5.2 BOXES
    5.2.1 All boxes shall be legibly and indelibly marked on the top and on the
    longer side as under :i) Nomenclature of the Stores
    ii) DS Cat No
    iii) Quantity Packed ( e.g. 18 x 500 ml)
    iv) Month and Year of Manufacture
    v) Batch No.
    Manufacturers / Suppliers Name or his recognised trade mark
    Name and address of the consignee
    Net and gross mass of the package

    Serial No. of the package together with the total number of package in the
    same delivery
    Contract No. and Date
    Inspection Note and Date
    "GLASS WITH CARE" in red block capital letter on all sides.
    Other details as per contract.
    6.0 PRE-INSPECTION OF STORES/ CONSIGNMENTS
    6.1 Manufacturers / suppliers shall satisfy themselves that the stores are in
    accordance with the terms of the contract and fully conform to the
    specification by carrying out a thorough pre- inspection of each lot before
    actually tendering the same for inspection to the Quality Assurance Officer
    nominated under the terms of the contract. A declaration by the contractor
    that necessary pre- inspection has been carried out on the stores tendered ,
    will be submitted along with challan. The declaration will also indicate the
    method followed in carrying out pre - inspection showing the features
    checked /tested and will have the test certificate attached to the challan
    /declaration.
    6. 2 If the Quality Assurance Officer finds that pre inspection of the
    consignment as required above has not been carried out the consignment is
    liable for rejection.
    6. 3 The stores shall be inspected at the suppliers premises for satisfactory
    performance and proper packaging before despatch to the destination.
    7.0 QUALITY ASSURANCE
    7. 1 The contractor shall extend to the Quality Assurance Authority or his
    authorised representative, free of cost all reasonable facilities for inspection
    and testing of stores for satisfying themselves that the stores are
    manufactured in accordance with this specification and for this purpose, shall
    have free access to the contractors or sub- contractors premises at all times
    during the run of the contract. The contractor shall notify to the Quality
    Assurance Authority of all sub- contracts placed by him and provide
    inspection facilities for all stores so sub- contracted.
    7.2 No deviation shall be accepted from governing specification without
    concurrence in writing of the Quality Assurance Authority. The contractor
    shall remain responsible for quality / quantity in any fabrication done by the
    sub- contractors.
    8.0 WARRANTY

    8. 1 The stores supplied shall bear a warranty as per contract. In absence of


    such clause the following clause shall apply.
    8. 2 The stores supplied against this specification shall be deemed to have a
    warranty of the contractor against defective material and performance for a
    period of 12 months from the date of receipt of stores by the consignee.
    During the period , if any of the stores is found to be defective by the
    consignee, the same shall be replaced by the supplier, free of any charge at
    the consignees end but not later than 3 months on receipt of such
    information.
    SAMPLING PLAN AND CRITERIA OF CONFORMITY
    Sampling plans and criteria of conformity shall be as per specification No.
    IND/SL/8900(a) for "Sampling Plans and Procedures for Inspection" of
    material stores.
    10.0 DEFENCE STORES CATALOGUE NUMBER
    10.1 Defence Store Catalogue Number allotted to Inhibitor Auto Rust and
    Scale is 6850 000084.
    SUGGESTION FOR IMPROVEMENT
    11. SUGGESTIONS FOR IMPROVEMENT
    11.1 Any suggestion for improvement in this document may be forwarded
    to :The Director
    Directorate of Standardisation
    Ministry of Defence
    H Block DHQ PO
    New Delhi 110 011

    You might also like