Scribd
Upload
41 views2 pages

Piezo AZ6 Uk

This document describes the piezo auto zero function, which enables setting the pressure sensor to zero and calculating regulator characteristics. It allows setting the frequency or number of measurement cycles between two auto zeros of the pressure sensor. The user can select either a number of minutes between 1 to 999 or a number of cycles for the auto zero interval.

Uploaded by

Suranyi Botond
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
41 views2 pages

Piezo AZ6 Uk

This document describes the piezo auto zero function, which enables setting the pressure sensor to zero and calculating regulator characteristics. It allows setting the frequency or number of measurement cycles between two auto zeros of the pressure sensor. The user can select either a number of minutes between 1 to 999 or a number of cycles for the auto zero interval.

Uploaded by

Suranyi Botond
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Sheet #648u Piezo auto zero

PIEZO AUTO ZERO


This function is to set the pressure sensor zero and calculate the electronic regulator
characteristics. This operation must be carried out regularly.
This function enables the setting of a frequency or a number of measurement cycles between
two pressure sensor auto zeros. The piezo auto zero function zeroed the instrument pressure
sensor to atmospheric pressure.
Number of minutes: to set a time frequency between two auto zeros of 1 to 999 minutes. If
set to zero, no auto-zero is performed.
Number of cycles: to set a number of cycles between two auto zeros.
The two options can be set, in this case the first counter to expire will start the
auto-zero, both counters will then be reset.

.1 PROCEDURE

From the "CONFIGURATION" menu, select


the "PNEUMATIC" menu and then press the
button.

Then by using the

arrows,

select the "PIEZO AUTO AZ" menu and


validate with the

By using the
"Yes" and validate with the

key.

arrows, select
key.

Then select the counter you want:


"N. OF MINUTES" or "N. OF CYCLES" and
configure the value.

Version 1.04a

User guide ATEQ 6th series Page 1/2

Sheet #648u Piezo auto zero

Then validate with the

Version 1.04a

key.

User guide ATEQ 6th series Page 2/2

You might also like