Scribd Logo
Upload

Welcome to Scribd!

  • 23 views

    How To Use RF Signal Generator

    Uploaded by

    nitarosy
    The document provides instructions for using an HP 8656 RF signal generator. It can generate frequencies from 100 kHz to 990 MHz with 10 Hz resolution and output levels from -127 dBm to +13 dBm in 0.1 dB steps. The generator provides basic AM and FM modulation with internal 1 kHz or 400 Hz sources or external modulation up to 50 kHz. Key functions include setting the frequency using FREQ, amplitude using AMPTD, and turning modulation on/off using AM/FM buttons.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd

    How To Use RF Signal Generator

    Uploaded by

    nitarosy
    23 views16 pages
    The document provides instructions for using an HP 8656 RF signal generator. It can generate frequencies from 100 kHz to 990 MHz with 10 Hz resolution and output levels from -127 dBm to +13 dBm in 0.1 dB steps. The generator provides basic AM and FM modulation with internal 1 kHz or 400 Hz sources or external modulation up to 50 kHz. Key functions include setting the frequency using FREQ, amplitude using AMPTD, and turning modulation on/off using AM/FM buttons.

    Original Description:

    explain SigGen function

    Original Title

    Signal Generator New

    Copyright

    © © All Rights Reserved

    Available Formats

    PPTX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for using an HP 8656 RF signal generator. It can generate frequencies from 100 kHz to 990 MHz with 10 Hz resolution and output levels from -127 dBm to +13 dBm in 0.1 dB steps. The generator provides basic AM and FM modulation with internal 1 kHz or 400 Hz sources or external modulation up to 50 kHz. Key functions include setting the frequency using FREQ, amplitude using AMPTD, and turning modulation on/off using AM/FM buttons.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    23 views16 pages

    How To Use RF Signal Generator

    Uploaded by

    nitarosy
    The document provides instructions for using an HP 8656 RF signal generator. It can generate frequencies from 100 kHz to 990 MHz with 10 Hz resolution and output levels from -127 dBm to +13 dBm in 0.1 dB steps. The generator provides basic AM and FM modulation with internal 1 kHz or 400 Hz sources or external modulation up to 50 kHz. Key functions include setting the frequency using FREQ, amplitude using AMPTD, and turning modulation on/off using AM/FM buttons.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    of 16

    How to Use

    RF Signal Generator

    hello!
    We are
    Citra Kusuma Wardhani
    And
    Nita Rosy Anggraini
    We are here to present about RF
    Signal Generator. Enjoy it

    HP 8656 RF signal generator

    OVERVIEW
    The HP 8656 is an RF signal generator covering 100 KHz
    through 990 MHz
    It has synthesized tuning with frequency resolution to 10
    Hz
    The RF output Level can be set from -127 dBm to +13 dBm
    with a resolution of 0.1 dB.
    Basic FM and AM modulation is provided with a built-in
    modulation source producing sinewaves at either 1 KHz or
    400 Hz.
    Alternatively, modulating waveforms can be input
    externally with a response bandwith from 20 Hz to 50 KHz

    OVERVIEW
    The first three buttons listed below are the most often
    used. Numeric values are entered with the numeric keypad
    followed by pressing a units key.
    FREQ. in this key, followed are by entering a frequency
    value on the numeric keypad and units (KHz, MHz, etc) on
    the units butons to the right of keypad
    AMPTD allows entry of an amplitude level
    AM/FM these buttons can be used to turn on and off
    modulation. To turn on modulation, press one of these
    buttons, followed by INT 1 KHz or 400 KHz butons. Then
    enter a frequency deviation or amplitude depth percent
    value via the keypad. Turn off modulation, hit AM or FM

    OVERVIEW
    MOD Input/Output input connector for externally applied
    modulating waveform.
    INCR SET allows varyingthe frequency or amplitude in user
    defined steps to manually sweep through a range near
    the current setting. To use, hit INCR SET followed by
    entering a frequency or dB value. Then use the up / down
    buttons belo FREQ or AMPTD

    1.
    HOW TO TURNING
    ON/OFF RF SIGNAL
    GENERATOR

    TURNING ON/OFF RF SIGNAL GENERATOR

    DONT TURN ON SIGNAL GENARATOR BEFORE RF


    OUTPUT CIRCUITED WITH MATCH IMPEANCE
    Because in high frecuency is
    dangerous if there are
    frequncy flow back to
    instrument.

    2.
    HOW TO SET FREQUENCY
    IN RF SIGNAL
    GENERATOR

    SET FREQUENCY RF SIGNAL GENERATOR

    1.
    2.
    3.

    Press frequency
    Enter or set the output frequency
    Set the unit

    3.
    HOW TO SET AMPLITUDE
    RF SIGNAL GENERATOR

    SET FREQUENCY RF SIGNAL GENERATOR

    1.
    2.
    3.

    Press amplitude
    Enter or set the output amplitude
    Set the unit

    4
    HOW TO SET AM OR FM
    MODULATION SIGNAL RF
    SIGNAL GENERATOR

    SET FREQUENCY RF SIGNAL GENERATOR

    1. Press button AM or FM
    2. Press button INT 400 Hz or INT 1 kHz
    3. Enter or set the frequency

    thanks!

    You might also like