15W Ceiling Speaker
15W Ceiling Speaker
15W Ceiling Speaker
DNH AS
ENGLAND
DNH WW Ltd
GERMANY
USA
DNH GmbH
Specifications
Material / Color
Mounting
Termination
Weight w/transformer
IP-rating
Max. / min. amb. temp
Rated / max. power
SPL 1W/1m
SPL rated power
Effective freq. range
Dispersion (-6dB) 1kHz / 4kHz
Directivity factor, Q
Options
PA / ABS / RAL9010
Hooks
Spring clamps
1,3 kg
54
90C / -20C
15 W / 20 W
93 dB
100 dB
170 20000 Hz
Install the ring into the cut-out hole turning the crews connected to the three hooks, screw clockwise until the
ring is fixed to the ceiling.
Lead cable through cable gland, connect to terminal (70V or 100V) and select required tapping in to the
transformer.
Screw box back into place with one screw.
Turn the grill gently clockwise within the ring until it stops.
Hooks can be mounted both ways, see drawing at top of the page.
For optimum performance, always use the correct voltage / power and operate within the frequency limits as
stated.
Do not open loudspeaker when energized.
This loudspeaker is supplied with a 2 year warranty against defective workmanship.
Rev. 09.01.2013