Scribd
Upload
3K views2 pages

NTP Server Reachability Fault

This document provides instructions for modifying NTP server configuration on LTE nodes. It includes: 1. The template to modify the IP interface configuration to point to new NTP servers due to a change in the transmission path. 2. The new NTP server IP addresses, subnet, and next hop to configure. 3. Commands to add the new NTP servers as synchronization references.

Uploaded by

3GSERO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
3K views2 pages

NTP Server Reachability Fault

This document provides instructions for modifying NTP server configuration on LTE nodes. It includes: 1. The template to modify the IP interface configuration to point to new NTP servers due to a change in the transmission path. 2. The new NTP server IP addresses, subnet, and next hop to configure. 3. Commands to add the new NTP servers as synchronization references.

Uploaded by

3GSERO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

***NTP Server Reachability Fault y Clock Calibration Expiry Soon***

Ejemplo:
-Cuando salen alarmas de "NTP Server Reachability Fault" y "Clock Calibration Expiry Soon" en Nodos de
LTE, ltimamente son debidas a trabajos de Ericsson al pasar de TX por va directa, a TX por va TCU.

RBS NTP IP addr


RBS NTP Subnet
server IP1
NTP server IP2
10.202.34.202
10.202.34.0/23
10.202.34.1

RBS Next Hop NTP

RBS NTP VLAN

10.202.35.254

230

NTP
10.202.34.2

-Esta es la plantilla que debemos usar para modificar los datos de asignacin del IpInterface=3
(IpAccessHostEt=2) en un Nodo de LTE:
rdel IpSystem=1,IpAccessHostEt=2,IpSyncRef=
rdel IpSystem=1,IpAccessHostEt=2
rdel
Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=3
confb+
gs+
cr
Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=3
23 #networkPrefixLength
10.202.35.254 #defaultRouter0
0.0.0.0 #ownIpAddressActive
0.0.0.0 #ownIpAddressPassive
false #rps
d #vlanRef
1500 #mtu
lset
Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=3$
accessControlListRef
lset
Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=3$
defaultRouter1 0.0.0.0
lset
Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=3$
defaultRouter2 0.0.0.0
lset
Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=3$
defaultRouterPingInterval 4
lset
Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=3$
logging 0
lset
Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=3$
maxNoOfFailedPings 2
lset
Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=3$
maxWaitForPingReply 3
lset
Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=3$
noOfPingsBeforeOk 2
lset
Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=3$
switchBackTimer 180
lset
Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=3$
trafficSchedulerRef
lset
Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=3$
trafficType 4
lset
Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=3$
userLabel 3

lset
Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=3$
vLan true
lset
Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=3$
vid 230
confbgsconfb+
gs+
cr IpSystem=1,IpAccessHostEt=2
10.202.34.202 #ipAddress
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=3
#ipInterfaceMoRef
0 #networkPrefixLength
lset IpSystem=1,IpAccessHostEt=2$ administrativeState 1
lset IpSystem=1,IpAccessHostEt=2$ ipDefaultTtl 64
lset IpSystem=1,IpAccessHostEt=2$ ntpDscp 46
lset IpSystem=1,IpAccessHostEt=2$ ntpServerMode 0
lset IpSystem=1,IpAccessHostEt=2$ userLabel 2
confbgs-

confb+
gs+
cr IpSystem=1,IpAccessHostEt=2,IpSyncRef=2
10.202.34.1 #ntpServerIpAddress
lset IpSystem=1,IpAccessHostEt=2,IpSyncRef=2$ administrativeState 0
lset IpSystem=1,IpAccessHostEt=2,IpSyncRef=2$ userLabel
lacc TransportNetwork=1,Synchronization=1$ addSyncRefResource
IpSystem=1,IpAccessHostEt=2,IpSyncRef=2
2
cr IpSystem=1,IpAccessHostEt=2,IpSyncRef=1
10.202.34.2 #ntpServerIpAddress
lset IpSystem=1,IpAccessHostEt=2,IpSyncRef=1$ administrativeState 0
lset IpSystem=1,IpAccessHostEt=2,IpSyncRef=1$ userLabel
lacc TransportNetwork=1,Synchronization=1$ addSyncRefResource
IpSystem=1,IpAccessHostEt=2,IpSyncRef=1
1
confbgs-

deb IpSystem=1,IpAccessHostEt=2,IpSyncRef
sts
get TransportNetwork=1,Synchronization=1

You might also like