Scribd Logo
Upload

Welcome to Scribd!

  • 65 views

    Connect As Below:: Serial Suite: ECU Plug

    Uploaded by

    Alexandre Da Silva Pinto
    The document provides instructions for connecting a serial suite to an ECU for reading and writing. It specifies connecting red wires to +12V power, black wires to ground, and connecting pins on the flat cable to the ECU in the specified order and configuration for reading or writing based on including or removing a bridging wire.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Connect As Below:: Serial Suite: ECU Plug

    Uploaded by

    Alexandre Da Silva Pinto
    65 views4 pages
    The document provides instructions for connecting a serial suite to an ECU for reading and writing. It specifies connecting red wires to +12V power, black wires to ground, and connecting pins on the flat cable to the ECU in the specified order and configuration for reading or writing based on including or removing a bridging wire.

    Original Description:

    manual1

    Original Title

    Jaguar

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for connecting a serial suite to an ECU for reading and writing. It specifies connecting red wires to +12V power, black wires to ground, and connecting pins on the flat cable to the ECU in the specified order and configuration for reading or writing based on including or removing a bridging wire.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    65 views4 pages

    Connect As Below:: Serial Suite: ECU Plug

    Uploaded by

    Alexandre Da Silva Pinto
    The document provides instructions for connecting a serial suite to an ECU for reading and writing. It specifies connecting red wires to +12V power, black wires to ground, and connecting pins on the flat cable to the ECU in the specified order and configuration for reading or writing based on including or removing a bridging wire.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Connect as below:

    Serial Suite:
    Red
    Black

    ECU Plug:
    to
    to

    3 Pins Red (Power Supply +12 Volt)


    1 Pins Black (Ground)

    Piasiniengineering [email protected] http://www.piasiniengineering.it


    Tel: +39 0342 489060 - Fax: +39 0342 488298

    Where to connect the flat cable:

    Piasiniengineering [email protected] http://www.piasiniengineering.it


    Tel: +39 0342 489060 - Fax: +39 0342 488298

    READ the ECU:

    1. Put a wire (bridge) like in the picture;


    2. Connect the flat cable pin like in the picture;
    3. Connect the flat cable pin on the Circle following the number like in the picture.

    Piasiniengineering [email protected] http://www.piasiniengineering.it


    Tel: +39 0342 489060 - Fax: +39 0342 488298

    WRITE the ECU:

    You have to remove the bridge used before, and put another 3 wire(Bridge) like in the
    picture.

    Piasiniengineering [email protected] http://www.piasiniengineering.it


    Tel: +39 0342 489060 - Fax: +39 0342 488298

    You might also like