Scribd
Upload
21 views

TOC Operate Time Curves

This document provides a tool to check the operating and reset times of various time-overcurrent protection standard curves. It displays the settings and injected currents for different curves like IEEE, IEC, ANSI, etc. along with the corresponding time to operate and reset. FlexCurve and user-defined curves can also be modeled by adjusting the relevant parameters.

Uploaded by

koushik42000
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
21 views

TOC Operate Time Curves

This document provides a tool to check the operating and reset times of various time-overcurrent protection standard curves. It displays the settings and injected currents for different curves like IEEE, IEC, ANSI, etc. along with the corresponding time to operate and reset. FlexCurve and user-defined curves can also be modeled by adjusting the relevant parameters.

Uploaded by

koushik42000
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

The following is a tool for easy check of TOC standard curves operate and reset tim

1. Make your settings only into white boxes corresponding to desired standard curve!

IEEE Extr. Inverse


SETTINGS:
INJECTED:
PKP
TDM Multple of PKP
1
1
4

Time to Operate
2.00 seconds

IEEE Very Inverse


SETTINGS:
INJECTED:
Time to Operate
PKP
TDM Multple of PKP
0.33 0.85
1.65
1.11 seconds
IEEE Moderately Inverse
SETTINGS:
INJECTED:
Time to Operate
PKP
TDM Multple of PKP
0.875
0.5
1.2
4.12 seconds
IEC Curve A
SETTINGS:
INJECTED:
Time to Operate
PKP
TDM Multple of PKP
0.42
10
16.7
18.32 seconds
IEC Curve B
SETTINGS:
INJECTED:
Time to Operate
PKP
TDM Multple of PKP
0.1 0.09
1.69
0.08 seconds
IEC Curve C
SETTINGS:
INJECTED:
Time to Operate
PKP
TDM Multple of PKP
0.015
1
0.02
102.86 seconds
IEC Short Inverse
SETTINGS:
INJECTED:
Time to Operate
PKP
TDM Multple of PKP
0.015
1
0.02
4.32 seconds

Time to Reset
1.94 seconds

Time to Reset
0.77 seconds

Time to Reset
2.75 seconds

Time to Reset
0.06 seconds

SETTINGS:
PKP
1

SETTINGS:
PKP
2

SETTINGS:
PKP
1

SETTINGS:
PKP
1

Time to Reset
0.01 seconds

SETTINGS:
PKP
1

Time to Reset
74.83 seconds

SETTINGS:
PKP
1

Time to Reset
0.64 seconds

A
IAC Long Inverse
SETTINGS:
INJECTED:
PKP
TDM
1
2

0.243
Time to Operate
5

6.67 seconds

Time to Reset
0.02 seconds
I/Ipkp =

ANSI Extreme Inverse


SETTINGS:
INJECTED:
Time to Operate
PKP
TDM
1
2
5 0.494831 seconds
ANSI Very Inverse
SETTINGS:
INJECTED:
PKP
TDM
1
4

Time to Operate
5 1.0395457 seconds

ANSI Normal Inverse


SETTINGS:
INJECTED:
Time to Operate
PKP
TDM
1
4
5 1.6271441 seconds
ANSI Moderate Inverse
SETTINGS:
INJECTED:
Time to Operate
PKP
TDM
1
4
5 1.3294834 seconds

Time to Reset
0.02 seconds

Time to Reset
0.04 seconds

Time to Reset
0.04 seconds

Time to Reset
0.04 seconds

d curves operate and reset time !

IAC Extr. Inverse


SETTINGS:
INJECTED:
Time to Operate
Time to Reset
TDM
Multple of PKP
1
0.5
-23.62 seconds
-8.01 seconds
IAC Very Inverse
SETTINGS:
INJECTED:
Time to Operate
Time to Reset
TDM
Multple of PKP
1
4
1.31207 seconds
1.56 seconds
IAC Inverse
SETTINGS:
INJECTED:
Time to Operate
Time to Reset
TDM
Multple of PKP
1
0.5
-14.52 seconds
-1.32 seconds
IAC Short Inverse
SETTINGS:
INJECTED:
Time to Operate
Time to Reset
TDM
Multple of PKP
5
4.5
0.29 seconds
0.06 seconds

I2t Curves
SETTINGS:
INJECTED:
Time to Operate
Time to Reset
TDM
Multple of PKP
1
0.5
400.00 seconds
25.00 seconds

FlexCurve A or B
SETTINGS:
INJECTED:
Time to Operate
Time to Reset
TDM
Multple of PKP to be calculated
to be calculated
1
1.5
seconds
seconds

P
0

Q
0.04

K
1

0
D=

T=

7.3088265642
MIFII - USER CURVE
5

You might also like