0% found this document useful (0 votes)
562 views1 page

Quality Check Sheet For Trouser

This quality check sheet is used to evaluate various aspects of trousers during production such as seams, stitching, button holes, waistbands, belt loops, defects, hems, pockets, zippers, and fly areas. Each aspect is rated on a scale of 1 to 5, with 1 being very good quality and 5 being poor quality. Trousers with defect ratings between 1-3 are accepted, while those with ratings from 4-5 are rejected. The supervisor must sign off on the completed quality check sheet.

Uploaded by

RAHUL16398
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
562 views1 page

Quality Check Sheet For Trouser

This quality check sheet is used to evaluate various aspects of trousers during production such as seams, stitching, button holes, waistbands, belt loops, defects, hems, pockets, zippers, and fly areas. Each aspect is rated on a scale of 1 to 5, with 1 being very good quality and 5 being poor quality. Trousers with defect ratings between 1-3 are accepted, while those with ratings from 4-5 are rejected. The supervisor must sign off on the completed quality check sheet.

Uploaded by

RAHUL16398
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

QUALITY CHECK SHEET FOR TROUSER

Name of the operator ________________


Line number

_________________

Date ________________
Style number ______________

SEAM AND STITCHING ANALYSIS


1
2
3
4

BUTON HOLES
1

WAISTBAND
1

BELT LOOPS
1

DEFECTS ON BOTH FRONT AND BACK OF THE TROUSER


1

HEMS
1
POCKETS
1

ZIPPERS
1
FLY AREA
1

Signature of Supervisor
Note- 1 is for very good quality of product whereas 5 is for poor quality. If the defects lies between
1-3 then it is accepted and if the defects lies between 4-5, the garment will be rejected.

You might also like