Vehicle Body Engineering

UNIT 1- CAR BODY DETAILS
Cars can come in a large variety of different body styles. Some are still in production,
while others are of historical interest only. These styles are largely (though not
completely) independent of a car's classification in terms of price, size and intended broad
market; the same car model might be available in multiple body styles (or model ranges).
For some of the following terms, especially relating to four-wheel drive / SUV models
and minivan / MPV models, the distinction between body style and classification is
particularly narrow.
Please note that while each body style has a historical and technical definition, in
common usage such definitions are often blurred. Over time, the common usage of each
term evolves. For example, people often call 4-passenger sport coups a "sports car",
while purists will insist that a sports car by definition is limited to two-place vehicles.
Body work
In automotive engineering, the bodywork of an automobile is the structure which
protects:
The occupants
Any other payload
The mechanical components.
In vehicles with a separate frame or chassis, the term bodywork is normally applied to
only the non-structural panels, including doors and other movable panels, but it may also
be used more generally to include the structural components which support the
mechanical components.
Construction
There are three main types of automotive bodywork:
The first automobiles were designs adapted in large part from horse-drawn
carriages, and had body-on-frame construction with a wooden frame and wooden
or metal body panels. Wooden-framed motor vehicles remain in production to this
day, with many of the cars made by the Morgan Motor Company still having
wooden structures underlying their bodywork.
A steel chassis or ladder frame replaced the wooden frame. This form of body-onframe construction is still common for commercial vehicles.
Monocoque, or unibody construction, in which the "chassis" is part of, and

1
www.Vidyarthiplus.com
integrated with the metal body. It provides support to all the mechanical
components, as well as protection for the vehicle occupants. Although there is no
separate complete frame or chassis, many monocoque/unibody designs now often
include subframes. Steel monocoque construction is now the most common form
of car bodywork, although aluminum and carbon fiber may also be used.
Less common types include tube frame and space frame designs used for highperformance cars. There have also been various hybrids, for example the Volkswagen
Beetle had a chassis, consisting of the floor pan, door sills and central tunnel, but this
chassis relied on the stiffening provided by the bodywork, a technique sometimes called
semi-monocoque construction.
Non-structural body panels have been made of wood, steel, aluminum, fiberglass and
several more exotic materials.
Body styles
There are several common car body styles:
Enclosed:
Sedan, known as a Saloon in British English.
Hardtop
Coup
2+2
Notchback
Limousine
Open or partly enclosed:
Roadster
Convertible (or Cabriolet)
Stanhope body
Touring car
Town car
Rear door designs:
Station wagon or Estate car

2
Sedan delivery
Hearse
Hatchback
Liftback
Combi coup
Other:
Sport utility vehicle (SUV)
Crossover
Minivan
Coupe Utility
Sedan (Saloon)
A sedan car or saloon car is a passenger car with two rows of seats and adequate
passenger space in the rear compartment for adult passengers. The vehicle usually has a
separate rear trunk for luggage, although some manufacturers such as Chevrolet, Tatra,
and Volkswagen have made rear-engined models. It is one of the most common body
styles for modern automobiles, and is often marketed at families under the rubric of
family sedan.
1 Types of sedan
1.1 Notchback sedans
1.2 Fastback sedans
1.3 Two-door sedans
1.4 Hardtop sedans
1.5 Hatchback sedans
1.6 Chauffeured sedans
Types of sedan
A sedan seats four or more people and has a fixed roof that is full-height up to the rear
3
window. The roof structure will typically have a fixed "B" pillar on sedan models. Most
commonly it is a four-door; two-door models are rare, but they do occur (more so
historically).
Notchback sedans
1962 Chevrolet Impala, a typical notchback sedanA notchback sedan is a three-box

sedan, where the passenger volume is clearly distinct from the trunk volume of the
vehicle (when seen from the side). The roof is on one plane, generally parallel to the
ground, the rear window at a sharp angle to the roof, and the trunk lid is also parallel to
the ground. Historically, this has been a popular and arguably the most traditional form of
passenger vehicle.
Fastback sedans
1941 Plymouth fastback sedan

A fastback sedan is a two-box sedan, with continuous slope from the roof to the base of
the decklid, but excludes the hatchback feature. Marketing terminology is often
misleading in this area - for example, Daimler AG calls the Mercedes-Benz CLS-Class
sedan a four-door coup because its semi-fastback design tries to give the impression of a
coup. Certain sedans are edging close to being one-box vehicles, where the windshield is
steeply raked from the hood and the rear window slopes toward almost the end of the car,
leaving just a short rear deck that is part of the trunk lid.
Typically this design is chosen for its aerodynamic advantages. Automakers can no longer
afford the penalty in fuel consumption produced by the traditional notchback three box
form.
4
Two-door sedans
Opel Kadett B two-door sedan

The Society of Automotive Engineers defines such a vehicle as any two-door model with
rear accommodation greater than or equal to 33 cubic feet (0.93 m3) in volume (a
calculation made by adding the legroom, shoulder room, and headroom. By this standard,
the Chevrolet Monte Carlo, Ferrari 612 Scaglietti, and Mercedes-Benz CL-Class coups
are all two-door sedans.
In the popular vernacular, a two-door sedan is defined by appearance and not by volume;
vehicles with a B-pillar between the front and rear windows are generally called two-door
sedans.
Hatchback sedans
Chevy Malibu Maxx hatchback sedan

Hatchback sedans typically have the fastback profile, but instead of a trunk lid, the entire
back of the vehicle lifts up (using a liftgate or hatch). A vehicle with four passenger doors
and a liftgate at the rear can be called a four-door hatchback, four-door hatchback sedan,
or five-door sedan. An example of such is the Chevrolet Malibu Maxx. There can also be
two-door hatchback sedans (three-door sedans), by the same technical explanation for
two-door sedans. Examples of this design are the Volkswagen Golf, and Chevrolet
Chevette.
Convertible
Jaguar XK8 c. 2008, with heatable glass rear window and fully automatic cloth top with
integral top-concealing rigid tonneau
A convertible is a type of automobile in which the roof can retract and fold away,
converting it from an enclosed to an open-air vehicle. Many different automobile body
styles are manufactured and marketed in convertible form.
Roof designs vary widely, but a few characteristics are common to all convertibles. Roofs
are affixed to the body of the vehicle and are usually not detachable. Instead the roof is
hinged and folds away, either into a recess behind the rear seats or into the boot or trunk
of the vehicle. The roof may operate either manually or automatically via hydraulic or
electrical actuators; the roof itself may be constructed of soft or rigid material. Soft-tops
are made of vinyl, canvas or other textile material; hard-top convertibles have roofs made
from steel, aluminum, carbon fiber or plastic materials.
Contemporary convertibles are known and marketed under several different terms due to
the convergence of body styles over the years. A soft-top convertible may also be referred
to as a cabriolet or cabrio or spyder, although two-seater soft tops often retain the name
roadster, referring to their body style.
1.Folding textile roof

The collapsible textile roof section (of cloth or vinyl) over an articulated folding frame
may include linings such as a sound-deadening layer or interior cosmetic headliner (to
hide the frame) or both and may have electrical or electro-hydraulic mechanisms
for raising the roof. The erected top secures to the windshield frame header with manual
latches, semi-manual latches, or fully automatic latches. The folded convertible top is
called the stack.
6
Convertibles offer the flexibility of an open top in trade for:
potentially reduced safety
poor break-in protection
deterioration and shrinkage of the sun-exposed textile fabric over time
diminished rear visibility, from a large roof structure, small rear window, or
obstructed rear window or all of these: e.g., MINI convertible.
generally poor structural rigidity. Contemporary engineering goes to great length

to counteract the effects of removal of a car's roof.
specifically poor structural rigidity, such as pronounced scuttle shake, a

characteristic whereby the structural design of the bulkhead between engine and
passenger compartment of a convertible suffers sufficiently poor rigidity to
negatively impact ride or handling or allow noticeable vibration, shudder or
chassis-flexing into the passenger compartment.
2.Retractable hardtop roof
A Volvo C70 with retractable hardtop
A retractable hardtop, also known as coup convertible or coup cabriolet, is a type

of convertible that forgoes a folding textile roof in favor of an automatically operated,
multi-part, self-storing hardtop where the rigid roof sections are opaque, translucent or
independently operable.
The retractable hardtop solves some issues with the convertible, but has its own
7
compromises, namely mechanical complexity, expense and more often than not, reduced
luggage capacity.
Construction
Retractable hardtops can vary in material (steel, plastic or aluminum), can vary from two
to five in the number of rigid sections and often rely on complex dual-hinged trunk
(British: boot) lids that enable the trunk lid to both receive the retracting top from the
front and also receive parcels or luggage from the rear along with complex trunk
divider mechanisms to prevent loading of luggage that would conflict with the operation
of the hardtop.
The retractable hardtop convertible trades higher initial cost, mechanical complexity and,
with rare exception, diminished trunk space for increased acoustic insulation,
durability and break-in protection similar to that of a fixed roof coupe.
The retractable hardtop eliminates:
the need for a storage-consuming, manually-from-outside-the-vehicle-installable,

separate or integral, rigid or foldable.
the need for a separate rigid hardtop requiring space-consuming off-season

storage and a cumbersome twice-yearly, two-person manual installation and
removal a system popularized, for example, by the Mercedes-Benz SL-Class of
1963 to 1988.
In addition to higher initial cost, diminished trunk space, and increased

mechanical complexity and thereby potentially higher repair cost.
Limousine
A black Lincoln Town Car "stretch" limousine at a car show in Bristol, England
The backseat of a Town Car, the most common chauffeured car in the US.
A limousine is a luxury vehicle, especially one with a lengthened wheelbase or driven by
a chauffeur. The chassis of a limousine may have been extended by the manufacturer or
by an independent coachbuilder. These are referred to as "stretch" limousines and are
traditionally black or white in color. Limousines are usually liveried vehicles, driven by
professional chauffeurs. As the most expensive form of automobile ground transportation,
limousines are culturally associated with extreme wealth or power, and are commonly
cited as an example of conspicuous consumption. Among the less wealthy, limousines are
also often hired during special events (most commonly weddings and funerals).
Limousine types
The limousine body style has a divider separating the driver from the rear passenger
compartment. This partition usually contains a sliding (often soundproof) glass window
so that conversations between passengers in the rear compartment may be kept private
from the chauffeur. Communication with the driver is possible either by opening the
window in the partition or by using an intercom system.
Traditional
Lincoln Limousine used by U. S. President Calvin Coolidge, c. 1924

Traditionally, the limousine has been an extension of a large car. A longer frame and
wheelbase allow the rear passenger compartment to contain the usual forward facing
passenger seat but with a substantial amount of foot room more than is actually
9
needed. Usually then two "jump seats" are mounted, facing rearward behind the driver.
These seats fold up when not in use. In this way, up to five persons can be carried in the
aft compartment in comfort, and up to two additional persons carried in the driver's
compartment, for a total capacity of seven passengers in addition to the driver.
Modern limousines
Maybach 62
Rolls Royce Phantom

Newer limousines such as the Maybach 62, Rolls Royce Phantom, Audi A8L,
Volkswagen Phaeton, Mercedes-Benz S-Class, Jaguar XJ, BMW 760Li, Lincoln Town
Car Edition, and the Cadillac DTS do not feature jump seats since stretch limousines are
usually used to transport more than three passengers, excluding the driver. In production
American limousines however, the jump seats almost always faced forward. The last
production limousine, by Cadillac, with forward facing jump seats was in 1987 (with
their Fleetwood Series 75 car), the last Packard in 1954, and the last Lincoln in 1939,
though Lincoln has offered limousines through their dealers as special order vehicles at
times. Several Lincoln Premier cars were also built, one being owned by Elvis Presley.
Vehicles of this type in private use may contain expensive audio players, televisions,
video players, and bars, often with refrigerators.
It is simpler to determine the effects of altering a separate chassis than it is to determine
the effects of altering a load-bearing unit body. For this reason, the automobile of choice
for conversion into stretch limousines is the Lincoln Town Car, whose Panther platform
is one of the last remaining automotive platforms using a separate load-bearing chassis.
Coach builders have built models based on SUVs with a separate load-bearing chassis,
10
including Hummer H2s and H3s.
Mercedes-Benz S600 Pullman limousine

STAGE
A Lada "limousine" in Trinidad, Cuba. This car and the Trabant below fall more into the
category of 'shuttle' than an actual luxury limousine.
Another type of vehicle modified for multiple passenger use is the motorized stage,
applied to the same tasks as the earlier stagecoach. It is not considered a true limousine
but rather in its design and application is between a sedan and a bus. While a bus will
have a central interior aisle for access to seating, a stage has multiple doors that allow
access to transverse forward facing seats. Examples of the type were constructed not only
from sedans (e.g., Chrysler New Yorker, Cadillac DeVille), but also from station wagons;
many of the station wagon conversions sported a large rack, running the length of the
roof, for carrying the passengers' baggage.
This type of vehicle was once rather common in some locations. An example of its use
was in the transport of travelers arriving by railroad at Merced, California to travel to
Yosemite National Park in the first half of the 20th century and at other remote parks. In
Yosemite, passengers would then stay in rustic platform tent camps or more expensive
lodges and hike or rent bicycles for movement around the park. In Glacier National Park,
the stages were referred to as "Jammers" in reference to the nickname of their gearjamming drivers.
A modern version of the stage is seen in some novelty stretch Hummer or Hummer H2
vehicles. Some funeral homes maintain six-door stages to carry the family of the deceased
between the church and the cemetery. These are usually not used for private hire.
11
Exotic limousines
A limousine based on a Ford Excursion

Sometimes a coach builder or car designer will develop the "ultimate" stretch limo,
adding amenities that are somewhat impractical but which make a significant design
statement. One such design includes tandem rear axles to support the weight of an
operational hot tub.
These extensive limousine conversions have been performed on several luxury marques
and fast cars, including: Bentley, BMW, Cadillac, Chrysler, Ford, Holden, Hummer,
Infiniti, Jaguar, Lexus, Lincoln, Mercedes-Benz, Rolls-Royce and Volkswagen.
Novelty limousines
12
Trabant limousine
Sometimes an "inappropriate" vehicle is converted, simply for the novelty. Hummer
vehicles have been converted. Another novelty conversion is the East German Trabant
which was designed for a low manufacturing cost and incorporated body panels made
from a rag fiber and plastic resin material. Volkswagen Beetles, Fiat Pandas and Citroen
2CV vehicles are occasionally stretched into limousines.
Station wagon (ESTATE CAR)
1957 Chevrolet 210 Station Wagon
1970's Opel Rekord D Caravan

A station wagon is a passenger car body style similar in terms of passengers to the
sedan/saloon style but incorporating a full-size back cargo compartment (that can be
further extended for a third passenger row in some cases) accessible via a fifth door
instead of the standard sedan trunk slot. Station wagons are not to be confused with
hatchbacks, whose difference lies in the size of the said compartment, with hatchbacks
fitting practically as much storage as sedans, but often borrowing the fifth door of a
station wagon instead of a trunk.
Also sometimes referred to simply as a wagon, the term 'station wagon' is used in United
States, Australian, Canadian and New Zealand English, while the alternative term estate
car or simply estate is used in British English, with 'station wagon' used occasionally for
specific model names. Some manufacturers from other European countries, including
Audi, BMW, and Citron have often referred to their wagons as "Avant", "Touring", and
13
"Break" respectively.
Description
Most station wagons are modified sedan-type car bodies, having the main interior area
extended to the near-vertical rear window over what would otherwise be the trunk (boot)
of the sedan version. Many are placed on a longer wheelbase to increase the boot
capacity. A hatchback car, although meeting a similar description, would not enjoy the
full height of the passenger cabin all the way to the back; the rear glass of a hatchback
being sloped further from vertical, and the hatch tending not to reach fully to the rear
bumper, as it commonly would in a station wagon. Station wagons also have side
windows over the cargo area, whereas some hatchbacks have thick "C" pillars and no
cargo area windows.
The rear door is usually top-hinged, but on many four-wheel drive-style vehicles it is
side-hinged. The original Range Rover, and a few traditional sedan-based wagons, have a
horizontally split two-piece rear door rather than a single hatch. The Morris Minor and
Mini Travellers, amongst other examples, have a vertically split pair of doors at the rear.
The popularity of the minivan in the 1980s, sport utility vehicles in the mid-1990s, and
crossovers in the 2000s is credited with the decline of the traditional station wagon in
North America.
TYPES:
All-steel wagons
1954 Plymouth Savoy Station Wagon
1957 Chevrolet Bel Air Townsman

14
1958 AMC Ambassador 4-door pillarless hardtop station wagon

Full-size wagons
1967 Ford Country Squire a full size station wagon

Traditionally, full-sized American station wagons were configured for 6 or 9 passengers.
The basic arrangement for seating six was three passengers in the front and three
passengers in the rear, all on bench-type seats; to accommodate nine, a third bench seat
often facing backward, but sometimes facing forward or sideways was installed in the
rear cargo area, over the rear axle. In Ford and Mercury wagons built after 1964, the
configuration was changed to two seats facing each other, placed behind the rear axle.
According to Ford, each seat would accommodate two people, raising the total seating
capacity to ten passengers; however, these seats were quite narrow in later models and
could only accommodate one passenger, limiting the total capacity to eight passengers.
Newer models are usually built on smaller platforms and accommodate five or six
passengers (depending on whether bucket or bench seats are fitted in front). Full-size
SUVs such as the Chevrolet Suburban and Ford Expedition have similar features to the
aforementioned full-size station wagons; such as 9-passenger seating with bench seating
in the front.
Two-door wagons
15
1956 Chevrolet Bel Air Nomad
1958 Mercury Commuter 2-door hardtop wagon
1971 Chevrolet Vega Kammback

This was a car targeting buyers looking for economy and load space, as well as a strategy
of reintroducing an old design; a business decision that has not been successfully
duplicated to this day.
Station wagons around the world
2005 Chrysler 300C Touring (European)
16
1990 Volvo 240
This modified MG ZT-T became the world's fastest estate/station wagon in 2003.[17]
1972 Citron DS Break
17
Toyota Camry wagon
Australian Ford BA Falcon station wagon

Tailgate evolution
18
1963 Studebaker Wagonaire
1974 Buick Estate Wagon with "clamshell" tailgate
2007 Ford Mondeo
Opel Insignia Sports Tourer

The vast majority of modern station wagons have an upward-swinging, full-width, full19
height rear door supported on gas struts, and a few also have a rear window that can be
swung upward independently to load small items without opening the whole liftgate.
Historically, however, many different designs have been used for access to the rear of car;
the following summary concentrates on American models.
The earliest common style was an upward-swinging window combined with a

downward swinging tailgate. Both were manually operated. This configuration
generally prevailed from the earliest origins of the wagon bodystyle in the 1920s
through the 1940s. It remained in use through 1960 on several models offered by
Ford.
In the early 1950s, tailgates with hand-cranked roll-down rear windows began to
appear. This was another innovation first seen on Rambler wagons.[18] Later in the
decade, electric power was applied to the tailgate window it could be operated
from the driver's seat, as well as by the keyhole in the rear door. By the early
1960s, this arrangement was becoming common on both full-size and compact
wagons.
A side hinged tailgate that opened like a door was offered on three-seat wagons by
American Motors to make it easier for the back row passengers to enter and exit
their rear-facing seats. This was later supplanted by the dual-hinged tailgate.
The Studebaker Wagonaire station wagon had a unique retractable rear roof
section as well as a conventional rear tailgate which folded down. This allowed it
to carry tall objects that would not fit otherwise. Water leaks, body flex and noise
prevented the innovation from being adopted by other manufacturers. The concept
was reintroduced in 2003 on GMC's mid-size Envoy XUV SUV, but did not last
long on that vehicle either.
The 196472 Oldsmobile Vista Cruiser and 196469 Buick Sport Wagon featured
raised rooflines beginning above the second-row seat and continuing all the way
to the rear tailgate. Above the second seat were plexiglas skylights in which
passengers could view the outside from overhead. On the three-seat models of
these wagons, the third seat faced forward as did the first and second seats, unlike
the normal practice of three-seat wagons at the time in which the rearmost seat
faced the rear.
Ford's full-size wagons for 1966 took the conventional tailgate and disappearing
window a step further. The rear section was made to open either downwards like a
regular tailgate, or like a door, outward from the curb side. The window had to be
retracted for either operation. This was called the "Magic Doorgate". For 1969,
Ford made another innovation by allowing the glass to stay up when the door was
opened sideways, thus creating the "Three-Way Magic Doorgate" (engineered by
Donald N. Frey[19] ). This versatile style quickly caught on and became a fixture
on full-size and intermediate wagons from GM, Ford, and Chrysler. GM,
however, added a notch in the rear bumper that acted as a step plate; to fill the
20
gap, a small portion of bumper was attached to the doorgate. When opened as a
swinging door, this part of the bumper moved away, allowing the depression in
the bumper to provide a "step" to ease entry; when the gate was opened by being
lowered or raised to a closed position, the chrome section remained in place
making the bumper "whole".
Full-size GM wagons (Buick, Chevrolet, Oldsmobile, and Pontiac) built between

model years 1971 and 1976 brought a completely new design to market. They had
a rear window that would slide upwards into the roof as the tailgate dropped down
below the load floor. This was referred to as a "clamshell" arrangement. On all
full-size GM wagons, the window for the clamshell door was power operated,
however the gate door itself could be had in either manual on Chevrolet models or
power assist in Pontiac, Oldsmobile or Buick cars. The manual style door quickly
lost favor because of the effort required to lift and swing the heavy door up from
its storage area; sales tapered off after the 1972 model year and electric assist all
but became standard. This was the first power tailgate in station wagon history.
This system was large, heavy, and complex, and was never adopted for any other
car manufacturer. After that, GM reverted to the doorgate style for its full-size
wagons (the February 2008 issue of Collectible Automobile magazine detailed
why this setup was phased out the 1977 GM full-size cars had to meet the DOTrevised category of 4000 GVW; the elimination of the clamshell was the first
agenda on the list, and limiting the bodystyles to the station wagon, coupe, and
sedan).
As the 1970s progressed, the need for lighter weight to meet fuel economy
standards led to a simplified, one-piece liftgate on several models, particularly
smaller wagons, such as is commonly seen on SUVs today. On the same principle,
and quite ironically, the last generation of GM's full-size wagons returned to the
upward-lifting rear window as had been used in the 1940s.
In recent years, the Citron C5 wagon features an upward-lifting full-height fullwidth rear door, where the window on the rear door can be opened independently
from the rear door itself. The window is also opened upwards and is held on gas
struts. The Renault Laguna II estate chassis has a similar arrangement.
Early models of the Range-Rover had a hinging number plate attached to the
lower part of the split rear door. When the lower part was folded down the plate
hung down to remain readable. This was deleted on later models but the split
tailgate remains to this day
Racing Cars
Auto racing
21
The start of a Formula One race in 2008
TYPES:
Single-seater racing
Modern Formula One car: McLaren MP4-24. Heikki Kovalainen testing at the Circuito
22
de Jerez, 2009
In single-seater (open-wheel) the wheels are not covered, and the cars often have aerofoil
wings front and rear to produce downforce and enhance adhesion to the track. In Europe
and Asia, open wheeled racing is commonly referred to as "Formula", with appropriate
hierarchical suffixes. In North America, the "Formula" terminology is not followed (with
the exception of F1). The sport is usually arranged to follow an "international" format
(such as F1), a "regional" format (such as the Formula 3 Euro Series), or a "domestic", or
country-specific format (such as the German Formula 3 championship, or the British
Formula Ford).
The best-known variety of single-seater racing, Formula One, involves an annual World
Championship for drivers and constructors
Formula Three car racing at the Hockenheimring, 2008

The other major international single-seater racing series is GP2 (formerly known as
Formula 3000 and Formula Two). Regional series include Formula Nippon and Formula
V6 Asia (specifically in Asia), Formula Renault 3.5 (also known as the World Series by
Renault, succession series of World Series by Nissan), Formula Three, Formula Palmer
Audi and Formula Atlantic. In 2009, the FIA Formula Two Championship brought about
the revival of the F2 series. Domestic, or country-specific series include Formula Three,
Formula Renault, Formula Ford with the leading introductory series being Formula
BMW.
Touring car racing
World Touring Car Championship 2006: Andy Priaulx leads at Curitiba.
23
Touring car racing is a style of road racing that is run with production derived race cars. It
often features full-contact racing due to the small speed differentials and large grids.
sports car racing
The Audi R8 was one of the most successful sports prototypes ever made, seen here at
Road Atlanta.
In sports car racing, production derived versions of sports cars also known as grand
tourers (GTs), and purpose built sports prototype cars compete within their respective
classes on closed circuits.
Sports prototypes, unlike GT cars, do not rely on road legal cars as a base. They are
closed wheel and often closed cockpit purpose built race cars intended mainly for
endurance racing. They have much lower weight and more down force compared to GT
cars making them much faster.
Famous sports car races include the 24 Hours of Le Mans, the 24 Hours of Daytona, 24
Hours of Spa-Franchorchamps, the 12 Hours of Sebring, and the 1,000-mile (1,600 km)
Petit Le Mans at Road Atlanta. There is also the 24 Hours of the Nrburgring on the
infamous Nordschleife track and the Dubai 24 Hour which is aimed at GT3 and below
cars with a mixture of professional and pro-am drivers.
Stock car racing
24
Practice for the Daytona 500.

Stock car racing is the most popular form of racing in North America.
Primarily raced on oval tracks, stock cars resemble production cars but are in fact
purpose-built racing machines which are built to tight specifications.
The largest stock car racing governing body is NASCAR(National Association for Stock
Car Auto Racing).
A World of Outlaws late model stock car on a dirt track.

There are also other stock car governing bodies, such as Automobile Racing Club of
America and United Speed Alliance Racing.
Rallying
A Ford Escort RS Cosworth, driven by Malcolm Wilson on a stage rally.

Rallying at international and most national championship levels involves two classes of
homologated road legal production based car; Group N Production cars and more
modified Group A cars. Cars compete on (closed) public roads or off-road areas run on a
point-to-point format where participants and their co-drivers "rally" to a set of points,
leaving in regular intervals from start points.
Targa Racing (Targa Rally)
25
A Toyota MR2 , driven by Adam Spence in the 2006 Targa Tasmania prologue stage.
Targa is a tarmac-based road rally which is run all around the world. This began with the
Targa Florio.
Off-road racing
In off-road racing, various classes of specially modified vehicles, including cars, compete
in races through off-road environments. In North America these races often take place in
the desert, such as the famous Baja 1000. In Europe, "offroad" refers to events such as
autocross or rallycross, while desert races and rally-raids such as the Paris-Dakar, Master
Rallye or European "bajas" are called "cross-country rallies."
Kart racing
A sprint kart race in Atwater California hosted by the International Karting Federation.
Although often seen as the entry point for serious racers into the sport, kart racing, or
karting, can be an economical way for amateurs to try racing and is also a fully fledged
international sport in its own right.
Sports car
26
Lotus Super 7, a fundamental sports car

The term sports car has been defined as "an open, low-built, fast motor car.
Overview
Sports cars can be either luxurious or spartan, but driving and mechanical performance is
requisite. Many drivers regard brand name and the subsequent racing reputation and
history as important indications of sporting quality (for example, Porsche, Lotus, or
Ferrari), but some exotic car brands, such as Lamborghini, which do not race or build
racing cars, are also highly regarded by sports car enthusiasts.
Sportcar description
An important sports feature on the Skelta G-Force is that it is made of carbon fiber,
making it ultra-light.
A sports car does not require a large, powerful engine, though many do have them. Many
classic British sports cars lacked powerful engines, but were known for exceptional
handling due to light weight; a well-engineered, balanced chassis; and modern suspension
(for example, Lotus Seven, Austin 7 Speedy). On tight, twisting roads, such a sports car
may perform more effectively than a heavier, more powerful car.
27
Layout
Alpine A110, a rear-engine, rear-wheel (RR) drive sports car
1990s Lotus Elan M100, a front-engine, front wheel (FF) drive sports car
Porsche Boxster, a rear mid-engine, rear-wheel (RMR) drive sports car

The drive train and engine layout significantly influences the handling characteristics of
an automobile, and is crucially important in the design of a sports car.
The front-engine, rear-wheel drive layout (FR) is common to sports cars of any era and
has survived longer in sports cars than in mainstream automobiles. Examples include the
Caterham 7, Mazda MX-5, and the Chevrolet Corvette.
The RMR layout is commonly found only in sports carsthe motor is centre-mounted in
the chassis (closer to and behind the driver), and powers only the rear wheels. Some high28
performance sports car manufacturers, such as Ferrari and Lamborghini prefer this layout.
Porsche is one of the few remaining manufacturers using the rear-engine, rear-wheel
drive layout (RR). The motor's distributed weight across the wheels, in a Porsche 911,
provides excellent traction, but the significant mass behind the rear wheels makes it more
prone to oversteer in some situations. Porsche has continuously refined the design and in
recent years added electronic driving aids (i.e. computerised traction-stability control) to
counteract these inherent design shortcomings.
Some sport cars have used the front-engine, front-wheel drive layout (FF), e.g. Fiat
Barchetta, Saab Sonett and Berkeley cars. This layout is advantageous for small, light,
lower power sports cars, as it avoids the extra weight, increased transmission power loss,
and packaging problems of a long driveshaft and longitudinal engine of FR vehicles. Yet,
its conservative handling effect, particularly under steer, and the fact that many drivers
believe rear wheel drive is a more desirable layout for a sports car make this layout
atypical to high-performance sports cars.
Seating
Some sports cars have small back seats that are really only suitable for luggage or small
children. Such a configuration is often referred to as a 2+2 (two full seats + two
"occasional" seats).
Over the years, some manufacturers of sports cars have sought to increase the practicality
of their vehicles by increasing the seating room. One method is to place the driver's seat
in the center of the car, which allows two full-sized passenger seats on each side and
slightly behind the driver. The arrangement was originally considered for the
Lamborghini Miura, but abandoned as impractical because of the difficulty for the driver
to enter/exit the vehicle. McLaren used the design in their F1.
Another British manufacturer, TVR, took a different approach in their Cerbera model.
The interior was designed in such a way that the dashboard on the passenger side swept
toward the front of the car, which allowed the passenger to sit farther forward than the
driver. This gave the rear seat passenger extra room and made the arrangement suitable
for three adult passengers and one child seated behind the driver.
DRIVERS VISIBILITY:
In transport, driver visibility is the maximum distance at which the driver of a vehicle
can see and identify prominent objects around the vehicle. [1] Visibility is primarily
determined by weather conditions (see visibility) and by a vehicle's design. [2] The parts
of a vehicle that influence visibility include the windshield, the dashboard and the pillars.
Good driver visibility is essential to safe road traffic.
Blind spots may occur in the front of the driver when the A-pillar (also called the
windshield pillar), side-view mirror, and interior rear-view mirror block a driver's view of
the road. Behind the driver, there are additional pillars, headrests, passengers, and cargo,
that may reduce visibility. Blind spots are affected directed by vehicular speed, since they
29
increase substantially the faster one goes.
A-pillar blind spot

1. Forward visibility
This diagram shows the blocked view in a horizontal-plane in front of the driver. The
front-end blind spots caused by this can create problems in traffic situations, such as in
roundabouts, intersections, and road crossings. Front-end blind spots are influenced by
the following design criteria:
Distance between the driver and the pillar
Thickness of the pillar
The angle of the pillar in a vertical plane side view
The angle of the pillar in a vertical plane front view
the form of the pillar straight or arc-form
Angle of the windshield
Height of the driver in relation to the dashboard
Speed of the opposite car
30
40 angle A-pillar bar blind spots

1. 1. Effects of A-pillar angle on visibility
Most passenger cars have a diagonal pillar as shown in this side view. The angle between
the horizon and A-pillar is approximately 40 degrees with a straight pillar that is not too
thick. This gives the car a strong, aerodynamic body with an adequately-sized front door.
vertical A-pillar having small blind spots

1. 1. 1. Panoramic windshield
The sides of a panoramic windshield are curved, which makes it possible to design
vertical A-pillars that give the driver maximum forward visibility. However, it is
31
impossible to design an aerodynamic small car with a vertical A-pillar because the more
vertical the A-pillar is, the less space the door opening has, and the greater frontal area
and coefficient of drag the vehicle will have.
Examples of cars with an almost vertical A-pillar:
Honda Step Bus Concept
Saab 900
School bus
Almost all Cadillacs from 1954-1959
A-pillar bars reduce driver visibility

1. 1. 2. Panoramic windshield
Some modern car designs have an extremely flat A-pillar angle with the horizon. For
example, the Pontiac Firebird and Chevrolet Camaro from 1993-2002 had a windshield
angle of 68 with the vertical, which equals just 22 with the horizon.[1]
A flatter A-pillar's advantages include reducing the overall drag coefficient and making
the car body stronger in a frontal collision, at the expense of reducing driver visibility in a
180 field of view from left to right.
32
Car with a "quarter glass", Visibility of short and tall drivers

1. 2. Other disadvantages of a flat windshield angle
Other traffic can not see the driver through the reflection if the driver can see
them.
The heater needs more time to heat the bigger window surface.
The flat windshield angle does not let snow slide off easily.
The driver cannot reach the whole flat window to clean it easily.
2. Height of the driver

Driver height can also affect visibility.
An A-pillar that is split up and haves a small triangle window (Front Quarter glass) can
give a short driver visibility problems. Some cars the windshield is fillet with the roofline with a big radius. A fillet round A-pillar can give a tall driver visibility problems.
Also sometimes the A-pillar can block the driver from seeing motorcyclists.
Also the B-pillar (car) can block the vision of a tall driver in small 4 door cars.
33
Turning your head reduces blind spot

A driver may reduce the size of a blind spot or eliminate it completely by turning their
head in the direction of the obstruction. This allows the driver to see better around the
obstruction and allows the driver better depth perception.
3. Visibility in a convertible
Because there is no roof connection between the A- and B- pillar The A-pillars of a
convertible automobile have to be stronger and even thicker,
However, with the top down there are no B or C pillars, improving driver visibility
behind the driver.
4. Windshield reflections
34
Sunlight dashboard reflection

4. 1. Dashboard reflection
It is best if the dashboard has a non-reflecting dark colored surface. [3]
35
A small dashboard gives some reflection on the lower part of the windshield.
A big dashboard can give reflection on eye height.
4. 2. A-pillar reflection
It is best if the inside of the A-pillar has a non-reflecting dark colored surface. [3]
If the side of the window is curved there is less A-pillar reflection. [4]
4. 3. Light through roof reflection
Some new model cars have a very big roof-window. Sometimes the sunlight through the
roof lights up the dashboard and gives a reflection in the windshield.
5. Other automobile design factors
Other design factors may prevent a manufacturer from maximizing visibility. These
include safety, as narrower pillars cannot be made strong as easily as thicker pillars, and
size restraints pertaining to aerodynamics, as taller, more vertical windshields create
additional drag and reduce fuel efficiency.
6. Rear-view mirror blind spots
A vehicular blind spot is the area of the road that while driving cannot be seen when
looking forward or through either the rear-view or side mirrors. Blind spots can be
checked by turning one's head briefly, eliminated by reducing overlap between side and
rear-view mirrors, or reduced by adding other mirrors with larger fields-of-view.
Detection of vehicles or other objects in blind spots may also be aided by systems such as
video cameras or distance sensors, though these are uncommon or expensive options in
automobiles generally sold to the public.
Blind spot (vehicle)
A blind spot in a vehicle are areas around the vehicle that cannot be directly observed
under existing circumstances. [1] Blind spots exist in a wide range of vehicles: cars,
trucks, motorboats and aircraft.
Motor vehicles
36
VISIBILITY TESTS:
(1)Reversing visibility test procedure
The test procedure consists of the following:
a laser pointing device,
a dummy to represent an average adult size,
a test cyclinder to represent the shoulder height of an average 2 year old child,
and
a grid extended 1.8 x 15 metres to the rear of the vehicle.
The laser is directed through the rear window of each vehicle. The position where the
laser is visible on the test cyclinder is noted. This procedure is repeated for all positions
on the grid. The results are analysed and an overall score is given. The best scores are
awarded to the vehicles which have the most effective rear visibility.
A low star rating car means a driver looking out the rear window is less likely to see an
object of child height, compared to a car with a better star rating. The more stars the
37
better.
In general, reversing sensors improve the rating by half a star.
(2) Visibility test by Motor Research Industry Association

Each of the cars was driven into the darkened lab and lights mounted in a dummy drivers
eye position were used to project shadows on to a screen which surrounded the car. The
grid on the screen was marked with a scale so that the edges of the shadow could be
measured in terms of their distance from the drivers eyes.
Three sets of measurements were taken for each car. Firstly, a single bulb was used to
project the shadow of both A-pillars on to the screen. Then, the coordinates of the upper
and lower corners were measured to enable the area of vision obscured by the pillars to be
calculated.
The dummys head was then changed to one which had both left and right eyes (bulbs)
so that binocular vision and pillar thickness could be assessed. The edge of each pillar
was measured using one bulb, then the other. In this way, we ensured that only the
proportion of the pillar which was obscured to both eyes was measured.
Finally, the critical vision area of the windscreen, which is four degrees above and four
degrees below the drivers straight-ahead eye position, was also measured and assessed.
The H-point dummy which was used in the tests represents an average-sized UK male.
It has a base and back which is moulded to the profile of the human body. Once installed
in the driving seat, the dummy was weighted to mimic the weight distribution of a person.
This ensured that it always adopted the same standard position in each car.
Aanalysing and presenting the data

A car with wide pillars and a wide screen will give a better overall field of view than a
vehicle with the same thickness of pillars, but a narrower screen. Our final rating for each
38
car takes this into account. The ratio of the screen to pillar areas is the critical vision
area of the windscreen divided by the left and right pillar areas added together. The
higher this value is, the better the score the car will receive.
Although only the screen-to-pillar ratio determines the final score, weve also scrutinised
the area of the drivers field of view that is obscured by the pillars, measured in metres
squared. This area is projected forward to 23 metres in front of the car the Highway
Code stopping distance at 30mph.
Pillars can obscure a frighteningly wide area - the thickest A-pillars can easily obscure a
whole car at a distance of 23 metres.
System for improving the visibility in vehicles
Laser Measuring
A system for improving the visibility in vehicles, including the following: an
illumination optical system (2) for continuous radiation of infrared pulsed light;
an associated receiver optical system (3) for receiving reflected components of the
radiated light; a display (4) for representing information obtained by the receiver
optical system (3), and a device (5, 6) for determining the presence of glare in the
receiver optical system (3) from a foreign vehicle illumination optical system and
39
for changing the keying interval or duty cycle of the infrared pulsed light of the
illumination optical system (2) driven with fixed keying interval in dependence
upon the vehicle direction of travel in such a manner that the glare is eliminated.
Therein the illumination optical system is driven is driven with a fixed keying
interval depending upon the vehicle direction of travel or, in certain cases, the
direction of illumination. In an alternative embodiment, the illumination optical
system (2) is operated at a wavelength which depends upon the vehicle direction
of travel or, in certain cases, the direction of illumination.
Representative Image:
Patent Research
The invention concerns a device for improving the view in vehicles, in particular at night,
bad weather and fog. In the process images of actual traffic scenes are recorded by a
camera (2), which is sensitive outside the visible spectrum, and these images are
40
reproduced in the visible spectrum in the vehicle via a display optic (6). According to the
invention the type of object which is contained in a traffic scene recorded by the camera
(2) is automatically classified according to type, and depending upon the type of the
recognized object it is reproduced on the display optic (6) in an intensity and/or color,
which corresponds to the intensity and/or color which the associated object typically has
by daylight. The process facilitates the recognition by the vehicle operator of images of
traffic scenes recorded outside the visible spectrum.
Representative Image:
Automobile safety
Automobile safety is the study and practice of vehicle design, construction, and
equipment to minimize the occurrence and consequences of automobile accidents. (Road
traffic safety more broadly includes roadway design.)
Improvements in roadway and automobile designs have steadily reduced injury and death
rates in all first world countries. Nevertheless, auto collisions are the leading cause of
injury-related deaths, an estimated total of 1.2 million in 2004, or 25% of the total from
41
all causes. Risk compensation limits the improvement that can be made, often leading to
reduced safety where one might expect the opposite.
Occupational driving
Work-related roadway crashes are the leading cause of death from traumatic injuries in
the U.S. workplace. They accounted for nearly 12,000 deaths between 1992 and 2000.
Deaths and injuries from these roadway crashes result in increased costs to employers and
lost productivity in addition to their toll in human suffering. Truck drivers tend to endure
higher fatality rates than workers in other occupations, but concerns about motor vehicle
safety in the workplace are not limited to those surrounding the operation of large trucks.
Workers outside the motor carrier industry routinely operate company-owned vehicles for
deliveries, sales and repair calls, client visits etc. In these instances, the employer
providing the vehicle generally plays a major role in setting safety, maintenance, and
training policy. As in non-occupational driving, young drivers are especially at risk. In the
workplace, 45% of all fatal injuries to workers under age 18 between 1992 and 2000 in
the United States resulted from transportation incidents.
Active and passive safety
The terms "active" and "passive" are simple but important terms in the world of
automotive safety. "Active safety" is used to refer to technology assisting in the
prevention of a crash and "passive safety" to components of the vehicle (primarily
airbags, seatbelts and the physical structure of the vehicle) that help to protect occupants
during a crash .[4][5]
Crash avoidance
Crash avoidance systems and devices help the driver and, increasingly, help the
vehicle itself to avoid a collision. This category includes:
The vehicle's headlamps, reflectors, and other lights and signals
The vehicle's mirrors
The vehicle's brakes, steering, and suspension systems
Driver assistance
A subset of crash avoidance is driver assistance systems, which help the driver to detect
ordinarily-hidden obstacles and to control the vehicle. Driver assistance systems include:
Automatic Braking systems to prevent or reduce the severity of collision.
Infrared night vision systems to increase seeing distance beyond headlamp range
Adaptive highbeam which automatically and continuously adapts the headlamp

42
range to the distance of vehicles ahead or which are oncoming
Adaptive headlamps swivels headlamps around corners
Reverse backup sensors, which alert drivers to difficult-to-see objects in their path
when reversing
Backup camera
Adaptive cruise control which maintains a safe distance from the vehicle in front
Lane departure warning systems to alert the driver of an unintended departure

from the intended lane of travel
Tire pressure monitoring systems or Deflation Detection Systems
Traction control systems which restore traction if driven wheels begin to spin
Electronic Stability Control, which intervenes to avert an impending loss of

control
Anti-lock braking systems
Electronic brakeforce distribution systems
Emergency brake assist systems
Cornering Brake Control systems
Precrash system
Automated parking system
Crashworthiness
43
Ferrari F430 steering wheel with airbag

Crashworthy systems and devices prevent or reduce the severity of injuries when a crash
is imminent or actually happening. Much research is carried out using anthropomorphic
crash test dummies.
Seatbelts limit the forward motion of an occupant, stretch to slow down the
occupant's deceleration in a crash, and prevent occupants being ejected from the
vehicle.
Airbags inflate to cushion the impact of a vehicle occupant with various parts of
the vehicle's interior.
Laminated windshields remain in one piece when impacted, preventing

penetration of unbelted occupants' heads and maintaining a minimal but adequate
transparency for control of the car immediately following a collision. Tempered
glass side and rear windows break into granules with minimally sharp edges,
rather than splintering into jagged fragments as ordinary glass does.
Crumple zones absorb and dissipate the force of a collision, displacing and
diverting it away from the passenger compartment and reducing the impact force
on the vehicle occupants. Vehicles will include a front, rear and maybe side
crumple zones (like Volvo SIPS) too.
Side impact protection beams.
Collapsible universally jointed steering columns, (with the steering system

mounted behind the front axle - not in the front crumple zone), reduce the risk and
severity of driver impalement on the column in a frontal crash.
Pedestrian protection systems.

44
Padding of the instrument panel and other interior parts of the vehicle likely to be
struck by the occupants during a crash.
Post-crash survivability
Post-crash survivability devices and systems help minimise the chances By using air bags
Pedestrian safety
1974 Mini Clubman Experimental Safety Vehicle featuring a "pedestrian-friendly" front

end.
Since at least the early 1970s, attention has also been given to vehicle design regarding
the safety of pedestrians in car-pedestrian collisions. Proposals in Europe would require
cars sold there to have a minimum/maximum hood (bonnet) height. From 2006 the use of
"bull bars", a fashion on 4x4s and SUVs, became illegal.
Pregnant women
When pregnant, women should continue to use seatbelts and airbags properly. A
University of Michigan study found that "unrestrained or improperly restrained pregnant
women are 5.7 times more likely to have an adverse fetal outcome than properly
restrained pregnant women". If seatbelts are not long enough, extensions are available
from the car manufacturer or an aftermarket supplier.
Infants and children
Children present significant challenges in engineering and producing safe vehicles,
because most children are significantly smaller and lighter than most adults. Safety
devices and systems designed and optimised to protect adults particularly calibrationsensitive devices like airbags and active seat belts can be ineffective or hazardous to
children. In recognition of this, many medical professionals and jurisdictions recommend
or require that children under a particular age, height, and/or weight[ ride in a child seat
and/or in the back seat, as applicable. Child safety locks and driver-controlled power
window lockout controls prevent children from opening doors and windows from inside
the vehicle.
45
Infants left in cars

Very young children can perish from heat or cold if left unattended in a parked car,
whether deliberately or through absentmindedness
Crash test dummy

From Wikipedia, the free encyclopedia
Jump to: navigation, search
For the band, see Crash Test Dummies. For the series of toys, see The Incredible Crash
Dummies.
It has been suggested that this article or section be merged with Crash test dummies in popular culture. (
This article needs additional citations for verification.

Please help improve this article by adding reliable references. Unsourced material may be chall
removed. (January 2009)
This article may contain original research. Please improve it by verifying the claims made a
references. Statements consisting only of original research may be removed. More details may be availa
talk page. (February 2010)
46
3-dimensional model of ATDs

Crash test dummies are full-scale anthropomorphic test devices (ATD) that simulate the
dimensions, weight proportions and articulation of the human body, and are usually
instrumented to record data about the dynamic behavior of the ATD in simulated vehicle
impacts.[1] This data can include variables such as velocity of impact, crushing force,
bending, folding, or torque of the body, and deceleration rates during a collision for use in
crash tests.
For the purpose of U.S. regulation and GTR's (Global Technical Regulations) and for
clear communication in safety and seating design[2] dummies carry specifically
designated reference points, such as the H-point, also used , for example, in automotive
design.
Crash test dummies remain indispensable in the development of and ergonomics in all
types of vehicles, from automobiles to aircraft.
Contents
[hide]
1 Testing
1.1 Cadaver testing
1.2 Volunteer testing
1.3 Animal testing
2 Dummy evolution
2.1 Hybrid III family
2.2 Testing procedure
2.3 Hybrid's successors
2.4 Future development
3 See also
4 Footnotes
5 References
[edit] Testing
On August 31, 1869, Mary Ward became the first recorded victim of a steam-powered
47
automobile accident; Karl Benz had not yet invented the gasoline-powered automobile
(1886). Ward, of Parsonstown, Ireland, was thrown out of a motor vehicle and killed.[3]
Thirty years later, on September 13, 1899, Henry Bliss became North America's first
motor vehicle fatality when hit while stepping off a New York City trolley. Since then,
over 20 million people worldwide have died to motor vehicle accidents.
The need for a means of analyzing and mitigating the effects of motor vehicle accidents
on humans was felt soon after commercial production of automobiles began in the late
1890s, and by the 1930s, when the automobile a common part of daily life and the
number of motor vehicle deaths was rising. Death rates had surpassed 15.6 fatalities per
100 million vehicle-miles and were continuing to climb.[citation needed]
In 1930, the interior of a car featured Dashboards of rigid metal, non-collapsible steering
columns and protruding knobs, buttons, and levers. Without seat belts, passengers in a
frontal collision could be hurled against the interior of the automobile or through the
windshield. The vehicle body itself was rigid, and impact forces were transmitted directly
to the vehicle occupants. As late as the 1950s, car manufacturers were on public record as
saying that vehicle accidents simply could not be made survivable because the forces in a
crash were too great.[citation needed]
[edit] Cadaver testing
Detroit's Wayne State University was the first to begin serious work on collecting data on
the effects of high-speed collisions on the human body. In the late 1930s there was no
reliable data on how the human body responds to the sudden, violent forces acting on it in
an automobile accident. Furthermore, no effective tools existed to measure such
responses. Biomechanics was a field barely in its infancy. It was therefore necessary to
employ two types of test subjects in order to develop initial data sets.
The first test subjects were human cadavers. They were used to obtain fundamental
information about the human body's ability to withstand the crushing and tearing forces
typically experienced in a high-speed accident. To such an end, steel ball bearings were
dropped on skulls, and bodies were dumped down unused elevator shafts onto steel
plates. Cadavers fitted with crude accelerometers were strapped into automobiles and
subjected to head-on collisions and vehicle rollovers.
Albert King's 1995 Journal of Trauma article, "Humanitarian Benefits of Cadaver
Research on Injury Prevention", clearly states the value in human lives saved as a result
of cadaver research. King's calculations indicate that as a result of design changes
implemented up to 1987, cadaver research has since saved 8500 lives annually. He notes
that for every cadaver used, each year 61 people survive due to wearing seat belts, 147
live due to air bags, and 68 survive windshield impact.
However, work with cadavers presented almost as many problems as it resolved. Not only
were there the moral and ethical issues related to working with the dead, but there were
also research concerns. The majority of cadavers available were older European
American adults who had died non-violent deaths; they did not represent a demographic
48
cross-section of accident victims. Deceased accident victims could not be employed

because any data that might be collected from such experimental subjects would be
compromised by the cadaver's previous injuries. Since no two cadavers are the same, and
since any specific part of a cadaver could only be used once, it was extremely difficult to
achieve reliable comparison data. In addition, child cadavers were not only difficult to
obtain, but both legal and public opinion made them effectively unusable. Moreover, as
crash testing became more routine, suitable cadavers became increasingly scarce. As a
result, biometric data were limited in extent and skewed toward the older males.
[edit] Volunteer testing
Some researchers took it upon themselves to serve as crash test dummies. Colonel John
Paul Stapp USAF propelled himself over 1000 km/h on a rocket sled and stopped in 1.4
seconds.[4] Lawrence Patrick, then a professor at Wayne State University, endured some
400 rides on a rocket sled in order to test the effects of rapid deceleration on the human
body. He and his students allowed themselves to be smashed in the chest with heavy
metal pendulums, impacted in the face by pneumatically-driven rotary hammers, and
sprayed with shattered glass to simulate window implosion.[5] While admitting that it
made him "a little sore", Patrick has said that the research he and his students conducted
was seminal in developing mathematical models against which further research could be
compared. But while data from live testing was valuable, human subjects could not
withstand tests which went past a certain degree of physical injury. To gather information
about the causes and prevention of injuries and fatalities would require a different kind of
subject.
[edit] Animal testing
By the mid-1950s, the bulk of the information cadaver testing could provide had been
harvested. It was also necessary to collect data on accident survivability, research for
which cadavers were woefully inadequate. In concert with the shortage of cadavers, this
need forced researchers to seek other models. A description by Mary Roach of the Eighth
Stapp Car Crash and Field Demonstration Conference shows the direction in which
research had begun to move. "We saw chimpanzees riding rocket sleds, a bear on an
impact swing...We observed a pig, anesthetized and placed in a sitting position on the
swing in the harness, crashed into a deep-dish steering wheel at about 10 mph."[6]
One important research objective which could not be achieved with either cadavers or
live humans was a means of reducing the injuries caused by impalement on the steering
column. By 1964, over a million fatalities resulting from steering wheel impact had been
recorded, a significant percentage of all fatalities; the introduction by General Motors in
the early 1960s of the collapsible steering column cut the risk of steering-wheel death by
fifty percent. The most commonly used animal subjects in cabin-collision studies were
pigs, primarily because their internal structure is similar to a human's. Pigs can also be
placed in a vehicle in a good approximation of a seated human.
The ability to sit upright was an important requirement for test animals in order that
another common fatal injury among human victims, decapitation, could be studied.
49
Additionally, it was important for researchers to be able to determine to what extent cabin
design needed to be modified to ensure optimal survival circumstances. For instance, a
dashboard with too little padding or padding which was too stiff or too soft would not
significantly reduce head injury over a dash with no padding at all. While knobs, levers,
and buttons are essential in the operation of a vehicle, which design modifications would
best ensure that these elements did not tear or puncture victims in a crash. Rear-view
mirror impact is a significant occurrence in a frontal collision; how should a mirror be
built so that it is both rigid enough to perform its task and yet of low injury risk if struck.
While work with cadavers had aroused some opposition, primarily from religious
institutions, it was grudgingly accepted because the dead, being dead, felt no pain, and the
indignity of their situations was directly related to easing the pain of the living. Animal
research, on the other hand, aroused much greater passion. Animal rights groups such as
the ASPCA were vehement in their protest, and while researchers such as Patrick
supported animal testing because of its ability to produce reliable, applicable data, there
was nonetheless a strong ethical unease about this process.
Although animal test data were still more easily obtained than cadaver data, the fact that
animals were not people and the difficulty of employing adequate internal
instrumentation limited their usefulness. Animal testing is no longer practiced by any of
the major automobile makers; General Motors discontinued live testing in 1993 and other
manufacturers followed suit shortly thereafter.
[edit] Dummy evolution
50
Sierra Sam tested ejection seats.

The information gleaned from cadaver research and animal studies had already been put
to some use in the construction of human simulacra as early as 1949, when "Sierra
Sam"[7] was created by Samuel W. Alderson at his Alderson Research Labs (ARL) and
Sierra Engineering Co. to test aircraft ejection seats, aviation helmets[8] and pilot restraint
harnesses. This testing involved the use of high acceleration to 1000 km/h (600 mph)
rocket sleds, beyond the capability of human volunteers to tolerate. In the early 1950s,
Alderson and Grumman produced a dummy which was used to conduct crash tests in
both motor vehicles and aircraft.
51
The mass production of dummies afforded their use in many more applications.
Alderson went on to produce what it called the VIP-50 series, built specifically for
General Motors and Ford, but which was also adopted by the National Bureau of
Standards. Sierra followed up with a competitor dummy, a model it called "Sierra Stan,"
but GM, who had taken over the impetus in developing a reliable and durable dummy,
found neither model satisfied its needs. GM engineers decided to combine the best
features of the VIP series and Sierra Stan, and so in 1971 Hybrid I was born. Hybrid I was
what is known as a "50th percentile male" dummy. That is to say, it modeled an average
male in height, mass, and proportion. The original "Sierra Sam" was a 95th percentile
male dummy (heavier and taller than 95% of human males). In cooperation with the
Society of Automotive Engineers (SAE), GM shared this design, and a subsequent 5th
percentile female dummy, with its competitors.
Since then, considerable work has gone into creating more and more sophisticated
dummies. Hybrid II was introduced in 1972, with improved shoulder, spine, and knee
responses, and more rigorous documentation. Hybrid II became the first dummy to
comply with the American Federal Motor Vehicle Safety Standard (FMVSS) for testing
of automotive lap and shoulder belts. In 1973, a 50th percentile male dummy was
released, and the National Highway Transportation Safety Administration (NHTSA)
NHTSA undertook an agreement with General Motors to produce a model exceeding
Hybrid II's performance in a number of specific areas.[9]
Though a great improvement over cadavers for standardized testing purposes, Hybrid I
and Hybrid II were still very crude, and their use was limited to developing and testing
seat belt designs. A dummy was needed which would allow researchers to explore injuryreduction strategies. It was this need that pushed GM researchers to develop the current
Hybrid line, the Hybrid III family of crash test dummies.
[edit] Hybrid III family
52
The original 50th percentile male Hybrid III's family expanded to include a 95th
percentile male, 5th percentile female, and ten, six, and three-year-old child dummies.
Hybrid III, the 50th percentile male dummy which made its first appearance in 1976, is
the familiar crash test dummy, and he is now a family man. If he could stand upright, he
would be 175 cm (5'9") tall and would have a mass of 77 kg (170 lb). He occupies the
driver's seat in all the Insurance Institute for Highway Safety (IIHS) [1] 65 km/h (40 mph)
offset frontal crash tests. He is joined by a "big brother", the 95th percentile Hybrid III, at
188 cm (6 ft 2 in) and 100 kg (223 lb). Ms. Hybrid III is a 5th percentile female dummy,
at a diminutive 152 cm (5 ft) tall and 50 kg (110 lb).[10] The three Hybrid III child
dummies represent a ten year old, 21 kg (47 lb) six year old, and a 15 kg (33 lb) three year
old. The child models are very recent additions to the crash test dummy family; because
so little hard data are available on the effects of accidents on children, and such data are
very difficult to obtain, these models are based in large part on estimates and
approximations. The primary benefit provided by the Hybrid III is improved neck
response in forward flexion and head rotation that better simulates the human.[11]
[edit] Testing procedure
Every Hybrid III undergoes calibration prior to a crash test. Its head is removed and is
dropped from 40 centimetres to test calibrate the head instrumentation. Then the head and
neck are reattached, set in motion, and stopped abruptly to check for proper neck flexure.
Hybrids wear chamois leather skin; the knees are struck with a metal probe to check for
proper puncture. Finally, the head and neck are attached to the body, which is attached to
a test platform and struck violently in the chest by a heavy pendulum to ensure that the
ribs bend and flex as they should.
When the dummy has been determined to be ready for testing, it is dressed entirely in
yellow, marking paint is applied to the head and knees, and calibration marks are fastened
to the side of the head to aid researchers when slow-motion films are reviewed later. The
dummy is then placed inside the test vehicle. Forty-four data channels located in all parts
of the Hybrid III, from the head to the ankle, record between 30 000 and 35 000 data
items in a typical 100150 millisecond crash. Recorded in a temporary data repository in
the dummy's chest, these data are downloaded to computer once the test is complete.
Because the Hybrid is a standardized data collection device, any part of a particular
Hybrid type is interchangeable with any other. Not only can one dummy be tested several
times, but if a part should fail, it can be replaced with a new part. A fully-instrumented
53
dummy is worth about 150 000.[12]

[edit] Hybrid's successors
Hybrid IIIs are designed to research the effects of frontal impacts, and are less valuable in
assessing the effects of other sorts of impacts, such as side impacts, rear impacts, or
rollovers. After head-on collisions, the most common severe injury accident is the side
impact.
The SID (Side Impact Dummy) family of test dummies has been designed to measure rib,
spine, and internal organ effects in side collisions. It also assesses spine and rib
deceleration and compression of the chest cavity. SID is the US government testing
standard, EuroSID is used in Europe to ensure compliance with safety standards, and SID
II(s) represents a 5th percentile female. BioSID is a more sophisticated version of SID
and EuroSID, but is not used in a regulatory capacity. The WorldSID is a project to
develop a new generation of dummy under the International Organization for
Standardization.[13]
BioRID is a dummy designed to assess the effects of a rear impact. Its primary purpose is
to research Whiplash, and to aid designers in developing effective head and neck
restraints. BioRID is more sophisticated in its spinal construction than Hybrid; 24
vertebra simulators allow BioRID to assume a much more natural seating posture, and to
demonstrate the neck movement and configuration seen in rear-end collisions.
THOR offers sophisticated instrumentation for assessing frontal-impacts.

CRABI is a child dummy used to evaluate the effectiveness of child restraint devices
including seat belts and air bags. There are three models of the CRABI, representing 18month, 12-month, and 6-month old children.
THOR is an advanced 50th percentile male dummy. The successor of Hybrid III, THOR
has a more humanlike spine and pelvis, and its face contains a number of sensors which
allow analysis of facial impacts to an accuracy currently unobtainable with other
dummies. THOR's range of sensors is also greater in quantity and sensitivity than those of
54
Hybrid III.
[edit] Future development
This section is written like a personal reflection or essay and may require cleanup. Please help im
rewriting it in an encyclopedic style. (April 2009)
Further development is needed on dummies which can address the concern that, even
though fewer lives are lost, there are still a hundred seriously injured passengers for every
death, and crippling injuries to the legs and feet represent a great percentage of resultant
physical impairments.
One important sector of the traveling public has yet to be represented in mainstream crash
testing pregnant women. The first prototype pregnant crash test dummy has been built
by engineering researchers at Loughborough University UK with the aim of improving
seat belt design. It has a fluid filled container above the pelvis to replicate the foetus and
womb. Belts can be uncomfortable for pregnant women so some choose not to wear
them, reducing their safety at a time when it should be increased. A second pregnant
crash test dummy has been designed by a student at the University of Idaho.
Crash test dummies have provided invaluable data on how human bodies react in crashes
and have contributed greatly to improved vehicle design. While they have saved millions
of lives, like cadavers and animals, they have reached a point of reduced data return.
The largest problem with acquiring data from cadavers, other than their availability, was
that an essential element of standardized testing, repeatability, was impossible. No matter
how many elements from a previous test could be reused, the cadaver had to be different
each time. While modern test dummies have overcome this problem, testers still face
essentially the same problem when it comes to testing the vehicle. A vehicle can be
crashed only once; no matter how carefully the test is done, it cannot be repeated exactly.
A second problem with dummies is that they are and will only ever be approximately
human. Forty-four data channels on a Hybrid III is not even a remote representation of the
number of data channels in a living person. The mimicking of internal organs is crude at
best, a fact that means that even though cadavers and animals are no longer the primary
sources of accident data, they must still be employed in the study of soft tissue injury.[14]
Furthermore, development of devices to simulate individual body systems is
underway.[15]
The future of crash testing has begun at the same place it all started: Wayne State
University. King H. Yang is one of Wayne State's researchers involved in creating
detailed computer models of human systems. The advantage of the computer is that it is
unbound by physical law. A virtual vehicle crashed once can be uncrashed and then
crashed again in a slightly different manner. A virtual back broken can be unbroken, the
seatbelt configuration changed, and the back re-broken. When every variable is
controllable and every event is repeatable, the need for physical experimentation is
greatly reduced.
55
At the beginning of the 21st century, legal certification of new car models is still required
to be done using physical dummies in physical vehicles. The next generation of crash test
dummies may perform their tasks entirely on a computer screen.
UNIT 2 VEHICLE AERODYNAMICS

INTRODUCTION
Aerodynamics is the study of the forces generated by the flow of air around a
solid object
Aerodynamics impacts the automobile in many ways

Fuel Consumption (pollution)
56
Styling
Noise & Vibration
Control and Handling
Fuel Consumption
Drag forces increase exponentially with velocity
More fuel is consumed to counter aerodynamic forces than any other factor
Better air flow management reduces fuel consumption and pollution
Styling
Aerodynamically efficient body surfaces may interfere with the styling
intent
The consumers may have preferences for aerodynamic features
57
Noise & Vibration

Air flow can create wind noise
Turbulent airflow can deposit dirt on windows and automobiles body
(e.g., rear window)
Turbulent airflow can cause undesirable vibrations
Control and Handling

Aerodynamic forces
Lift - dangerous at high speeds
Drag - decreases performance
Down force - better handling
Side force - better cornering
58
Aerodynamic forces can be optimized for local effect
Aerodynamic Theory
Aerodynamic Factors
Streamlines
Velocity Distribution
Laminar Flow
Turbulent Flow
Viscosity
Reynolds Number
Boundary Layer
Skin Friction Bernoullis Principle
Pitot Tube
Pressure Coefficient
59
Streamlines
Curves associated with a pictorial representation of air flow
Smoke is commonly used in wind tunnels to represent the streamlines
Streamlines are used to study air flow
Velocity Distribution
The nature of the fluid flow
A measure of changes in air flows velocity close to the vehicle
60
Laminar Flow
Fluid motion that is "well organized"
Fluid with parallel velocity vectors
Generally, laminar flow has the ideal aerodynamic properties
Turbulent Flow
Fluid motion that is not "well organized"
Fluid with parallel and other velocity vectors
Generally, turbulent flow has undesirable properties
61
Viscosity
The fluids resistance to motion
Internal fluid forces at the molecular level
Where, F= fluid viscosity force, = coefficient of viscosity, V = fluid

velocity, h= separation distance, and A= contact area
Pictorial of fluid viscosity
Example
What is the force required to pull the upper plate at 5 m/s, if the plate
62
area is 2 m2, and the fluid between the surfaces is water with the
separation distance of 0.04 m (waters coef. of viscosity is 1.0x10-3
Ns/m2)
Example
Using the previous diagram and dimensions,
How fast will the upper plate move, if the fluid is SAE 30 motor oil with
the coef. of viscosity of 4.0x10-3 Ns/m2 and an applied force of 2 N
Reynolds Number
Quantifies the product of speed times size
63
A dimensionless number
Where, is fluid density, is the viscosity, V is the velocity, and L is

the length of the object
Represents the ratio between inertial and viscous forces

Compensates for scale differences
Example
A car has a length of 4 m, travelling at 30 m/s
Air density is 1.22 Kg/m3
Air viscosity is 1.8x10-5
Re = 1.22 x 30 x 4 / (1.8x10-5) = 8.1x106
Re can indicate the nature of the fluid flow
Higher values indicate turbulent flow

Lower values indicate laminar flow
Different flows can be considered the same if they have similar Re
values
Allows scale models to be accurately tested in wind tunnels using

different fluids and or velocities
Boundary Layer
64
The thin layer of rapid tangential velocity change close to an objects

surface
Generally increases in thickness ( ) with the length of the object
Relative velocity
Zero at the objects surface
V at the outer edge of the boundary layer
Example
At 60 mph, the boundary layer is about an inch close to the rear of

a vehicle
A thicker boundary layer creates more viscous friction
A too sudden a change in thickness (transition) can cause flow

separation,
Additional drag (skin friction)
65
Loss of down force
Skin Friction
Cf, skin friction coefficient
Non-dimensional
Indicates the level of friction between the vehicles skin and the air
= Friction resistance
66
Example
What is the friction resistance ( ) of a plate moving at 30 m/s, with coef.
of friction of 0.002 through air with a density of 1.22 Kg/m3?
= Cf (0.5 V2) = 0.002 x 0.5 x 1.22 x 302
= 1.098 N/m2
Dynamic Pressure
67
Where V is the velocity, and is the fluid density
Boundary layer is thicker for turbulent flows

Skin friction (Cf) decreases with Re
At certain speeds, both laminar and turbulent flows are possible
Flow separation can be delayed in turbulent flow, resulting in a

preference for turbulent boundary conditions
Bernoullis Principle
Pressure drop: P1 > P2 > P3
Height of the fluid decreases with drop in pressure
68
Fluid Velocity is greater at the neck, V1 > V
Pressure drop, P1 > P3 > P2
Fluid pressure drops as fluid velocity increases
Fluid pressure is inversely proportional to fluid velocity
69
Bernoullis Equation
where, V = velocity, p = local static pressure, and = density, for any
point on a streamline
Usually used to compare and calculate pressure and velocity at two

different points
70
Example
What is the pressure difference on the surface of a vehicles grill (Vgrill=

0), if the vehicle travels at 30 m/s. Air density is 1.22 Kg/m3
Pitot Tube
Bernoullis equation allows measuring any fluid velocity by measuring

its pressure
71
Pressure Coefficient
Non-dimensional
Used to measure aerodynamic loads (lift, drag, and side forces)
Wind Tunnel
Used to study the aerodynamic properties of an object in a stationary
manner
Motion is simulated by moving air (fluid) around the object of interest
Properties measure in wind tunnel include pressures, forces, velocities,
and vibrations
72
Wind tunnel studies are not 100% accurate
Wind tunnel pictorials:
Types of Wind Tunnels
A basic wind tunnel (open-circuit)
73
General Motors wind tunnel (close-circuit)
Open-circuit wind tunnels

Less expensive
Subject to ambient conditions
Require more power
Close-circuit wind tunnels
Avoids loss of return airs momentum
Constant ambient conditions
Expensive
74
A wind tunnel can not always simulate road conditions, e.g.,
Ground effect
Tire rotation
Reynolds number (scale corrections)
Wall interference
Natural variations in ambient conditions
Challenges
Model size
The larger, the greater the wall effect
The smaller, the less accurate
Simulation of the moving road
Mounting of model and rotating wheels
Wall effect
75
Examples of wall effect corrections
Simulation of moving ground
76
Important issue about wind tunnel studies,

Understanding the aerodynamic problem is more critical than sensitive
instrumentation
Whatever works satisfactorily in the wind tunnel, will usually work well
on the road
Scale model studies are usually too conservative, and the vehicle can be
further optimized
Vehicle Aerodynamics
Vehicle Aerodynamic Factors
Aerodynamic Forces
Laminar Separation
Tripping of Boundary Layer
Pressure Distribution
Wake
Tires
77
Glass and Trim

General Improvements
Unconventional Features
Aerodynamic Forces
Lift force
Drag force
Side force
Effects of aerodynamic forces are profound
78
Force coefficients
Example
What is a vehicles drag force, with a frontal area of 1.5 m2, CD of 0.4, and
traveling at 30 m/s
79
Aerodynamic down force

Opposite of lift in direction
Uses an inverted airfoil
Increases load on tires without increasing the vehicles weight (up to 10%
of vehicles weight)
Improves cornering performance with no weight penalty

First discovered in 1960s!
Example of down force
80
Example
Rear Spoiler (Mazda RX-7 R-2)
CD = 0.31 (0.29 without spoiler)
CL front = 0.10 (0.16 without spoiler)
CL rear = 0.08 (0.08 without spoiler)
Underbody improvements
Aerodynamic properties
Reduce drag
Increase down force
81
Laminar Separation
Laminar Separation
Flow separation inside the boundary layer
Laminar Bubble
Streamlines enclosed within the laminar separation
82
Laminar bubble area is sensitive and can easily separate, resulting in

excess drag
Can appear in low Re range (104-105), and disappear as speed increases,

causing severe discrepancies in flow visualization and analysis
The rear end shape is the most critical factor in lowering the drag
coefficient
Flow separation above the rear window can cause annoying dirt deposits
on the glass
83
Tripping of Boundary Layer

Introduction of aerodynamic disturbances
Fins
Vortex generators
Strips of coarse sand paper
Forcing laminar to turbulent flow
Drag reduction due to delay in the onset of flow separation
84
Pressure Distribution
Helps the placement of inlets and outlets
Lower pressure at the outlet
Higher pressure at the inlet
Favorable pressure distribution
Prevents flow separation
Unfavorable pressure distribution
Promotes flow separation
Promotes turbulent flow within boundary layer
Example of inlet
85
Radiator inlet configurations
86
Wake
The disturbed air flow left behind the vehicle
Usually in the form of a vortex
Caused by merging air flows at different velocities near sharp edges
87
Increases drag
Presents danger to the following vehicles
Can be controlled with small fins or smooth edges
Tires
Tires influence a vehicles aerodynamic properties
Cross sectional area
Frontal area
Rotation of tires
88
Effects of tire rotation
89
Effect of all-wheel-steering
Glass and Trim
Drag can be reduced by making glass and trim as flush with the body as
possible
90
Elimination of rain gutter improves the vehicle aerodynamics
91
General Improvements
1- Front spoiler
2- Ducted engine cooling
3- Shrouded windshield wiper arms
4- Aerodynamic mirrors
5- Smooth windshield transitions
6- Smooth side window transitions
7- Smooth rear window transition
8- Optimized trunk corner radii
9- Optimized lower rear panel
10 - Smooth fuel tank and underbody
11- Optimized rocker panels
12- Flush wheel covers
13- Elimination of the rain gutter
92
Unconventional Features
Large rear fins promote lateral stability in the 1966 Peugeot CD
1969 Chaparral 2J used auxiliary fans to create suction under the car
93
Fords rear mounted transverse engine
Fans improve aerodynamic properties and reduce drag
Wind tunnel
NASA wind tunnel with the model of a plane.
94
A model Cessna with helium-filled bubbles showing streamlines of the wingtip vortices.
A wind tunnel is a research tool used in aerodynamic research. It is used to study the effects of air mo
past solid objects.
Theory of operation
Wind tunnels were first proposed as a means of studying vehicles (primarily airplanes) in
free flight. The wind tunnel was envisioned as a means of reversing the usual paradigm:
instead of the air's standing still and the aircraft moving at speed through it, the same
effect would be obtained if the aircraft stood still and the air moved at speed past it. In
that way a stationary observer could study the aircraft in action, and could measure the
aerodynamic forces being imposed on the aircraft.
Later, wind tunnel study came into its own: the effects of wind on manmade structures or
objects needed to be studied, when buildings became tall enough to present large surfaces
to the wind, and the resulting forces had to be resisted by the building's internal structure.
Determining such forces was required before building codes could specify the required
strength of such buildings.
Still later, wind-tunnel testing was applied to automobiles, not so much to determine
aerodynamic forces per se but more to determine ways to reduce the power required to
move the vehicle on roadways at a given speed. In these studies, the interaction between
the road and the vehicle plays a significant role, and this interaction must be taken into
consideration when interpreting the test results. In an actual situation the roadway is
moving relative to the vehicle but the air is stationary relative to the roadway, but in the
wind tunnel the air is moving relative to the roadway, while the roadway is stationary
relative to the test vehicle. Some automotive-test wind tunnels have incorporated moving
belts under the test vehicle in an effort to approximate the actual condition.
Measurement of aerodynamic forces

Ways that air velocity and pressures are measured in wind tunnels:
air velocity through the test section is determined by Bernoulli's principle.

Measurement of the dynamic pressure, the static pressure, and (for compressible
flow only) the temperature rise in the airflow
direction of airflow around a model can be determined by tufts of yarn attached to

the aerodynamic surfaces
direction of airflow approaching an aerodynamic surface can be visualized by

mounting threads in the airflow ahead of and aft of the test model
dye, smoke, or bubbles of liquid can be introduced into the airflow upstream of
the test model, and their path around the model can be photographed (see particle
image velocimetry)
95
pressures on the test model are usually measured with beam balances, connected
to the test model with beams or strings or cables
pressure distributions across the test model have historically been measured by
drilling many small holes along the airflow path, and using multi-tube
manometers to measure the pressure at each hole
pressure distributions can more conveniently be measured by the use of pressuresensitive paint, in which higher local pressure is indicated by lowered
fluorescence of the paint at that point
pressure distributions can also be conveniently measured by the use of pressuresensitive pressure belts, a recent development in which multiple ultraminiaturized pressure sensor modules are integrated into a flexible strip. The strip
is attached to the aerodynamic surface with tape, and it sends signals depicting the
pressure distribution along its surface.
pressure distributions on a test model can also be determined by performing a

wake survey, in which either a single pitot tube is used to obtain multiple
readings downstream of the test model, or a multiple-tube manometer is mounted
downstream and all its readings are taken (often by photograph).
How it works
Six-element external balance below the Kirsten Wind Tunnel

Air is blown or sucked through a duct equipped with a viewing port and instrumentation
where models or geometrical shapes are mounted for study. Typically the air is moved
through the tunnel using a series of fans. For very large wind tunnels several meters in
96
diameter, a single large fan is not practical, and so instead an array of multiple fans are
used in parallel to provide sufficient airflow. Due to the sheer volume and speed of air
movement required, the fans may be powered by stationary turbofan engines rather than
electric motors.
The airflow created by the fans that is entering the tunnel is itself highly turbulent due to
the fan blade motion (when the fan is blowing air into the test section - when it is sucking
air out of the test section downstream, the fan-blade turbulence is not a factor), and so is
not directly useful for accurate measurements. The air moving through the tunnel needs to
be relatively turbulence-free and laminar. To correct this problem, closely-spaced vertical
and horizontal air vanes are used to smooth out the turbulent airflow before reaching the
subject of the testing.
Due to the effects of viscosity, the cross-section of a wind tunnel is typically circular
rather than square, because there will be greater flow constriction in the corners of a
square tunnel that can make the flow turbulent. A circular tunnel provides a smoother
flow.
The inside facing of the tunnel is typically as smooth as possible, to reduce surface drag
and turbulence that could impact the accuracy of the testing. Even smooth walls induce
some drag into the airflow, and so the object being tested is usually kept near the center
of the tunnel, with an empty buffer zone between the object and the tunnel walls. There
are correction factors to relate wind tunnel test results to open-air results.
Lighting is usually recessed into the circular walls of the tunnel and shines in through
windows. If the light were mounted on the inside surface of the tunnel in a conventional
manner, the light bulb would generate turbulence as the air blows around it. Similarly,
observation is usually done through transparent portholes into the tunnel. Rather than
simply being flat discs, these lighting and observation windows may be curved to match
the cross-section of the tunnel and further reduce turbulence around the window.
Various techniques are used to study the actual airflow around the geometry and compare
it with theoretical results, which must also take into account the Reynolds number and
Mach number for the regime of operation.
Pressure measurements
Pressure across the surfaces of the model can be measured if the model includes pressure
taps. This can be useful for pressure-dominated phenomena, but this only accounts for
normal forces on the body.
Force and moment measurements

A typical lift coefficient versus angle of attack curve.
With the model mounted on a force balance, one can measure lift, drag, lateral forces,
yaw, roll, and pitching moments over a range of angle of attack. This allows one to
produce common curves such as lift coefficient versus angle of attack (shown).
97
Note that the force balance itself creates drag and potential turbulence that will affect the
model and introduce errors into the measurements. The supporting structures are
therefore typically smoothly shaped to minimize turbulence.
Flow visualization
Because air is transparent it is difficult to directly observe the air movement itself.
Instead, multiple methods of both quantitative and qualitative flow visualization methods
have been developed for testing in a wind tunnel.
Qualitative methods
Smoke
Tufts
Tufts are applied to a model and remain attached during testing. Tufts can be used to
gauge air flow patterns and flow separation.
Compilation of images taken during an alpha run starting at 0 degrees alpha ranging to 26
degrees alpha. Images taken at the Kirsten Wind Tunnel using fluorescent mini-tufts.
Notice how separation starts at the outboard wing and progresses inward. Notice also how
there is delayed separation aft of the nacelle.
98
Fluorescent mini-tufts attached to a wing in the Kirsten Wind Tunnel showing air flow
direction and separation. Angle of attack ~ 12 degrees, speed ~120 Mph.
Evaporating suspensions
Evaporating suspensions are simply a mixture of some sort or fine powder, talc, or clay
mixed into a liquid with a low latent heat of evaporation. When the wind is turned on the
liquid quickly evaporates leaving behind the clay in a pattern characteristic of the air
flow.
China clay on a wing in the Kirsten Wind Tunnel showing reverse and span-wise flow.
Oil
99
When oil is applied to the model surface it can clearly show the transition from laminar to
turbulent flow as well as flow separation.
Oil flow vis on straight wing in the Kirsten Wind Tunnel. Trip dots can be seen near the
leading edge.
Sublimation
If the air movement in the tunnel is sufficiently non-turbulent, a particle stream released
into the airflow will not break up as the air moves along, but stay together as a sharp thin
line. Multiple particle streams released from a grid of many nozzles can provide a
dynamic three-dimensional shape of the airflow around a body. As with the force balance,
these injection pipes and nozzles need to be shaped in a manner that minimizes the
introduction of turbulent airflow into the airstream.
High-speed turbulence and vortices can be difficult to see directly, but strobe lights and
film cameras or high-speed digital cameras can help to capture events that are a blur to
the naked eye.
High-speed cameras are also required when the subject of the test is itself moving at high
speed, such as an airplane propeller. The camera can capture stop-motion images of how
the blade cuts through the particulate streams and how vortices are generated along the
trailing edges of the moving blade.
Wind tunnel classification

There are many different kinds of wind tunnels, an overview is given in the figure below:
Low speed wind tunnel
High speed wind tunnel
Supersonic wind tunnel
Hypersonic wind tunnel
Subsonic and transonic wind tunnel
100
UNIT3&4) VANS TRUCKS AND

BUSES
101
A coach (also motor coach, often simply called a bus) is a type of

bus used for conveying passengers on excursions and on longer
distance intercity bus service between citiesor even between
countries. Unlike transit buses designed for shorter journeys,
coaches often have a luggage hold separate from the passenger
cabin and are normally equipped with facilities required for longer
trips including comfortable seats and sometimes a toilet.
The term 'coach' was previously used for a horse-drawn carriage
designed for the conveyance of more than one passenger, the
passengers' luggage, and mail, which is covered for protection from
the elements. The term was applied to railway carriages in the 19th
century, and later to motor coaches (buses).
Coaches, as they hold passengers for significant periods of time on
long journeys, are designed for comfort. They vary considerably in
quality from country to country and within counties. Higher
specification vehicles include luxury seats and air conditioning.
Coaches typically have only a single, narrow door, as an increased
loading time is acceptable due to infrequent stops. Some
characteristics include:
Comfortable seats that may include a folding table, armrests,
and recliner. Comfort is considered to be an important feature
in coaches.
Luggage racks above the seats where passengers can access their
carry-on baggage during the journey
Baggage holds, accessed from outside the vehicle, often under the
main floor or at the rear, where passengers' luggage can be stowed
away from the seating area
Passenger service units, mounted overhead, on which personal
reading lights and air conditioning ducts can be controlled and
used by individual passengers with little disturbance to other
passengers
On-board rest rooms fitted with chemical toilets, hand basins and hand
sanitizer.
On some buses, on-board entertainment including movies may be
102
shown to passengers On-board refreshment service or vending

machines
Wheelchair accommodation, possibly including a wheelchair lifts for
access.
SINGLE DECKER BUS - A single-decker bus or single-decker is a bus
that has a single deck for passengers. Normally the use of the term
single-decker refers to a standard two-axled rigid bus, in direct
contrast to the use of the term double-decker bus, which is essentially
a bus with two passengers decks and a staircase. These types of
single-deckers may feature one or more doors, and varying internal
combustion engine positions.
In regions where double-deckers are not common, the term singledecker may lack common usage, as in one sense, all other main types
of bus have a single deck. Also, the
110
www.jntuworld.com || www.jwjobs.net
urban areas, the single Decker is the standard mode of public
transport bus travel, increasingly with low floor features.
With their origins in van chassis, minibuses are not usually considered
single-deckers, although modern minibus designs blur this distinction.
Minibuses can also be regarded as both included with and separate
from standard single-deckers, in terms of full size length and vehicle
weights, although again design developments have seen this
distinction blurred. Some coach style buses that do not have under
floor luggage space can also be correctly termed as single-deckers,
with some sharing standard bus chassis designs, such as the Volvo
B10M, with a different body style applied.
DOUBLE DECKER BUSA double-decker bus is a bus that has two storeys or decks. Red
double-decker buses are used for mass transit in London. Doubledecker buses are also used in other cities in Europe, Asia, and
former British colonies and protectorates such as Hong Kong,
103
Singapore and Canada.

Almost all double-deckers have a single, rigid chassis.
This type of bus is often used for touring rather than for mass
transit. As William Ewart Gladstone observed, "...the way to see
London is from the top of a 'bus".
In India, Bangalore had double deckers for a while before
discontinuing. Madras's Metropolitan Transport Corporation (MTC) has
a small fleet of double-decker buses mostly in the high-density, longer
distance routes. Mumbai has operated double-decker buses since
1937. They are operated by the Brihanmumbai Electric Supply and
Transport undertaking. Thiruvananthapuram, Kochi, Kolkata and
Hyderabad also have double-decker buses. They are mode led on the
London buses. Ashok Leyland Titan double Decker buses are used in all
cities. Articulated double Decker buses from Ashok Leyland were used
till it was phased out in early 1990s and Volvo B9TL Wrights are now
begun operating in Mumbai and Chennai since early 2010 and
Enviro400s were also brought into Hyderabad since 2011.
104
111
105
106
107
112
108
109
110
113
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
www.jntuworld.com || www.android.jntuworld.com || www.jwjobs.net ||
www.android.jwjobs.net
VEHICLE CODY ENGINEERING AND SAFETY

SIDDIQUI
M A QADEER
147
148
149
126
Types of commercial
vehicle body

lorry

150
covered tru
container tr

fire truck
wreck truck
tilt truck
tanker truck
fire engine
151

cement truc
car transpo
animal
transpor
tipper
trailer
lorry
152
Drop
side
Fixed side
153
Drop side
154

Sid
es
are
dro
ppe
d
for
loa
din
g
&u
nlo
adi
ng

Side
155
&
tail
boar
d is
hing
ed
for
drop
ping

Side ,t
ail
board
is
fitted
in
corner
irons
with
156
the
help of
cotter
pin
157
fixed side
158
In this
type
vehicle
Sides
built in
height
and
rigid
loading
and
unloadi
ng in
Tail
side.

Trans
portat
ion
Vario
159
us
agric
ulture
good
s,
indus
trial
good
s&
vario
us
parce
ls
160
fixed side(six wheeled)

161

H
i
g
h
w
h
e
e
l
b
a
s
e

H
i
g
h
l
162
o
a
d
c
a
r
r
y
i
n
g
c
a
p
a
c
i
t
y

D
o
163
u
b
l
e
a
x
l
e
v
e
h
i
c
l
e
164
Articulated vehicle
165

H
i
g
h
w
h
e
e
l
b
a
s
e
f
o
r
l
e
n
166
g
t
h
y
c
o
m
p
o
n
e
n
t
t
o
c
a
r
r
y

D
167
u
e
t
o
h
i
g
h
w
h
e
e
l
b
a
s
e
t
u
r
n
i
n
168
g
b
e
c
o
m
e
d
i
f
f
i
c
u
l
t
,
s
o
t
r
a
i
169
l
e
r
i
m
p
l
e
m
e
n
t
e
d
170
Flat platform
171
Flat platform
172
Underframe: Longitudinals and

floor bearers manufactured from
steel, galvanised or aluminium,
mounted to vehicle chassis with
particular manufacturers
recommendation.
Wings:Thermoplastic wings fitted to

chassis with tubular wing stays,
galvanised mudguard brackets and
Ken Kerr standard or spray
suppression mud flaps.
Sideguards:Anodised aluminium
with galvanised folding sideguard
arms to allow for easy access to
battery and air filters.

173
Flat platform
174
Marker lamps:LED type, water resistant and shock

proof. Amber to side, red to rear and complying
with all legal requirements.
Floor options:18, 21, 27 mm birch multi layer

containerdeck ply board, finished with a phenol
non slip surface.22, 28 mm keruing hardwood
halflap.
Body side raves:Aluminium/steel galvanised rolled

channels.
Gantry:Aluminium/steel angles to cab height to

create ladder gantry, infilled with
aluminium/steel corrugated to under window
height and galvanised mesh to upper section
to protect rear of cab.
Rope hooks:Galvanised bolt on rope hooks to

every cross-member where possible.
175
Box van or chassis van

176

177
Underframe:Longitudinals and
floor bearers manufactured from
steel, galvanised or aluminium,
mounted to vehicle chassis with
particular manufacturers
recommendation.
Wings:Thermoplastic wings fitted to

chassis with tubular wing stays,
galvanised mudguard brackets and
Ken Kerr standard or spray
suppression mud flaps.
Sideguards:Anodised aluminium
with galvanised folding sideguard
arms to allow for easy access to
battery and air filters.
178

179
Roof:Fibreglass or aluminium
roof skin on fully bonded
galvanised roof sticks with
aluminium standard radius cant
rails.
Interior:9 mm plywood
kickboards to off-side, nearside and bulkhead. Seven
timber or aluminium tie rails
rising at 300 mm centres. Two
interior lamps fitted 600 mm
from front of body and 600 mm
from rear.
180
Tanker body
181
Tanker body
182
tanker is used to transport like

detergent ,edible oil, resins, fat,
sugarin solution, liquid
gaseous,water,milk,fuels etc
Ellptical tank has advantage of

low centre of gravity.
183
Tipper body
184
185
186

Vehicle Body Engineering

Uploaded by

Copyright:

Available Formats

Vehicle Body Engineering

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Vehicle Body Engineering

Uploaded by

Copyright:

Available Formats

What are the different types of body construction mentioned?

What are the different types of body construction mentioned?

What are some common body styles listed?

What are some common body styles listed?

UNIT 1- CAR BODY DETAILS

Any other payload

The mechanical components.

Monocoque, or unibody construction, in which the "chassis" is part of, and

Sedan, known as a Saloon in British English.

Open or partly enclosed:

Convertible (or Cabriolet)

Rear door designs:

Station wagon or Estate car

Sport utility vehicle (SUV)

1.1 Notchback sedans

1.2 Fastback sedans

1.3 Two-door sedans

1.4 Hardtop sedans

1.5 Hatchback sedans

1.6 Chauffeured sedans

1962 Chevrolet Impala, a typical notchback sedanA notchback sedan is a three-box

1941 Plymouth fastback sedan

Opel Kadett B two-door sedan

Chevy Malibu Maxx hatchback sedan

1.Folding textile roof

Convertibles offer the flexibility of an open top in trade for:

potentially reduced safety

poor break-in protection

deterioration and shrinkage of the sun-exposed textile fabric over time

generally poor structural rigidity. Contemporary engineering goes to great length

specifically poor structural rigidity, such as pronounced scuttle shake, a

2.Retractable hardtop roof

A Volvo C70 with retractable hardtop

A retractable hardtop, also known as coup convertible or coup cabriolet, is a type

the need for a storage-consuming, manually-from-outside-the-vehicle-installable,

the need for a separate rigid hardtop requiring space-consuming off-season

In addition to higher initial cost, diminished trunk space, and increased

Lincoln Limousine used by U. S. President Calvin Coolidge, c. 1924

Rolls Royce Phantom

including Hummer H2s and H3s.

Mercedes-Benz S600 Pullman limousine

A limousine based on a Ford Excursion

Station wagon (ESTATE CAR)

1957 Chevrolet 210 Station Wagon

1970's Opel Rekord D Caravan

1954 Plymouth Savoy Station Wagon

1957 Chevrolet Bel Air Townsman

1958 AMC Ambassador 4-door pillarless hardtop station wagon

1967 Ford Country Squire a full size station wagon

1956 Chevrolet Bel Air Nomad

1958 Mercury Commuter 2-door hardtop wagon

1971 Chevrolet Vega Kammback

2005 Chrysler 300C Touring (European)

1990 Volvo 240

1972 Citron DS Break

Toyota Camry wagon

Australian Ford BA Falcon station wagon

1963 Studebaker Wagonaire