EC32L | eConais

Page 1 of 7

EC32L
WiSmart EC32Lxx Wi-Fi 802.11b/g/n Module Family
WiSmart EC32Lxx is a family of Ultra low Power Application Ready versatile modules, which can fit into any existing or

new electronic device to add Wi-Fi functionality.

It is based on an ultra-low power, high performance 32-bit microcontroller in combination with the lowest power
consumption Wi-Fi chip in the market.
WiSmart runs a powerful IPv4/IPv6 TCP-IP stack, an RTOS, full Wi-Fi managements with WPA/WPA2 support for
both PSK and Enterprise, legacy Ad-Hoc, Wi-Fi client (STA) , AP mode and WPS.
Plenty of FLASH memory is left free for any third party application that can make use of the well-defined API exported
by the module.
More flash and features are available in models with bigger versions of MCU.

WiSmart EC32Lxx family models & characteristics

Baseline Series

Part Number

EC32L11

EC32L13
(EC32S13)

EC32L12

Operation
Temperature

-30 to +85 C

Voltage range

3.0 3.6V

Module Type

Surface mounted module

EC32L14

1/14/2014

EC32L | eConais

Page 2 of 7

Physical Dimensions

MCU

FLASH
RAM
Available
I/O interfaces

34.29 x 21.59 x 3.879mm

STM32F103RD

STM32F103RE

STM32F103RF

STM32F103RG

ARM Cortex-M3
Max clock: 72MHz
Processing power: 90
DMIPS
1.25 DMIPS/MHz
(Dhrystone 2.1)

ARM Cortex-M3
Max clock: 72MHz
Processing power: 90
DMIPS
1.25 DMIPS/MHz
(Dhrystone 2.1)

ARM Cortex-M3
Max clock: 72MHz
Processing power: 90
DMIPS
1.25 DMIPS/MHz
(Dhrystone 2.1)

ARM Cortex-M3
Max clock: 72MHz
Processing power: 90
DMIPS
1.25 DMIPS/MHz
(Dhrystone 2.1)

384K

512K

768K

1024K

64K

96K

1x 4.5 Mbps USART (USART1) with RTS/CTS support

2x 2.25 Mbps USARTs (USART2, USART3) with RTS/CTS support

NOTE:
The pins are
multiplexed
and used for more
than one functions
each.

2x I2C channels
multi-master and slave modes
standard and fast modes
7/10-bit addressing mode
7-bit dual addressing mode as slave

Always consult
MCU datasheet
and
module datasheet

2x I2S channels (multiplexed with SPI2 and SPI3)

16/32 bit resolution
Audio sampling frequencies from 8 kHz to 48 kHz
Can be output to the external DAC/CODEC at 256 times the sampling frequency
3x SPIs Master/Slave (up to 18 Mbits/s)
2x 12-bit buffered channels DAC
two DAC converters: one for each output channel
8-bit or 12-bit monotonic output
left or right data alignment in 12-bit mode
synchronized update capability
external triggers for conversion
3x 12-bit channels ADC
each ADC shares up to 16 external channels
Simultaneous sample and hold
Interleaved sample and hold
Single shunt

1/14/2014

EC32L | eConais

Page 3 of 7

1x Temperature sensor
conversion range is between 2V < VDDA < 3.6V
1x USB 1.1 device interface
USB device peripheral
compatible with the USB full-speed 12 Mbit/s
1x CAN 2.0A & B (active)
up to 1 Mbit/s
standard frames with 11-bit identifiers
extended frames with 29-bit identifiers
3x transmit mailboxes, 2x receive FIFOs with 3 stages
14 scalable filter banks
1x JTAG
25x GPIOs
Most of the GPIO pins are shared with digital or analog alternate functions

Advanced Series
Part Number

EC32L22

EC32L23

Operation
Temperature

-30 to +85 C

Voltage range

3.0 3.6V

Module Type

Surface mounted module

Physical
Dimensions

34.29 x 21.59 x 3.879mm

MCU

FLASH
RAM

EC32L24

STM32F205RE

STM32F205RF

STM32F205RG

ARM Cortex-M3
Max clock: 120MHz
Processing power: 150 DMIPS
1.25 DMIPS/MHz
(Dhrystone 2.1)

ARM Cortex-M3
Max clock: 120MHz
Processing power: 150 DMIPS
1.25 DMIPS/MHz
(Dhrystone 2.1)

ARM Cortex-M3
Max clock: 120MHz
Processing power: 150 DMIPS
1.25 DMIPS/MHz
(Dhrystone 2.1)

512K

768K

1024K

128K

Available
1x 7.5 Mbps USART (USART1) with RTS/CTS support
I/O interfaces

1/14/2014

EC32L | eConais

NOTE:
The pins are
multiplexed
and used for
more
than one
functions each.

Page 4 of 7

1x 7.5 Mbps UART (USART6) noRTS/CTS support

2x 3.25 Mbps USARTs (USART2, USART3) with RTS/CTS support
1x 3.25 Mbps UART (UART4) no RTS/CTS support

2x I2C channels
multi-master and slave modes
standard and fast modes
Always consult 7/10-bit addressing mode
MCU datasheet 7-bit dual addressing mode as slave
and
module datasheet 2x I2S channels (multiplexed with SPI2 and SPI3)
16/32 bit resolution
Audio sampling frequencies from 8 kHz to 192 kHz
Can be output to the external DAC/CODEC at 256 times the sampling frequency
3x SPIs Master/Slave (up to 42 Mbits/s)
3x 12-bit channels ADC
each ADC shares up to 16 external channels
Simultaneous sample and hold
Interleaved sample and hold
2x 12-bit buffered channels DAC
two DAC converters: one for each output channel
8-bit or 12-bit monotonic output
left or right data alignment in 12-bit mode
synchronized update capability
external triggers for conversion
1x Temperature sensor
conversion range is between 1.8V < VDDA < 3.6V
internally connected to the ADC1_IN16 input channel
1x USB 1.1 device interface
USB device peripheral
compatible with the USB full-speed 12 Mbit/s
2x CAN 2.0A & B (active)
up to 1 Mbit/s
standard frames with 11-bit identifiers
extended frames with 29-bit identifiers
3x transmit mailboxes, 2x receive FIFOs with 3 stages
28 scalable filter banks
256 bytes of SRAM allocated to each CAN
1x JTAG

1/14/2014

EC32L | eConais

Page 5 of 7

25x GPIOs
Most of the GPIO pins are shared with digital or analog alternate functions
maximum I/O toggling up to 60 MHz
1x Random number generator (RNG)
RNG that delivers 32-bit random numbers
1) MPU
2) DSP with FPU
3) True random number generator (RNG)
Special Features

4) ART Accelerator (Adaptive real-time accelerator) allowing 0-wait state execution from Flash
memory
5) Dedicated PLL for audio I2S application. It allows to achieve error-free I2S sampling clock
accuracy without compromising on the CPU performance, while using USB peripherals.

High Performance Series

Part Number

EC32L44

Operation
Temperature

-30 to +85 C

Voltage range

3.0 3.6V

Module Type

Surface mounted module

Physical
Dimensions

34.29 x 21.59 x 3.879mm

STM32F405RG

MCU

ARM Cortex-M4
Max clock: 168MHz
Processing power: 210 DMIPS
1.25 DMIPS/MHz
(Dhrystone 2.1)

FLASH

1024K

RAM

192K
1x 10.5 Mbps USART (USART1) with RTS/CTS support

1/14/2014

EC32L | eConais

Available
I/O interfaces
NOTE:
The pins are
multiplexed

each.
Always consult
MCU datasheet
and
module
datasheet

Page 6 of 7

1x 10.5 Mbps UART (USART6) no RTS/CTS support

2x 5.25 Mbps USARTs (USART2, USART3) with RTS/CTS support
1x 5.25 Mbps UART (UART4) no RTS/CTS support
I2C channels
multi-master and slave modes
standard and fast modes
7/10-bit addressing mode
7-bit dual addressing mode as slave
2x I2S channels (multiplexed with SPI2 and SPI3)
16/32 bit resolution
Audio sampling frequencies from 8 kHz to 192 kHz
Can be output to the external DAC/CODEC at 256 times the sampling frequency
3x SPIs Master/Slave (up to 42 Mbits/s)
3x 12-bit channels ADC
each ADC shares up to 16 external channels
Simultaneous sample and hold
Interleaved sample and hold
2x 12-bit buffered channels DAC
two DAC converters: one for each output channel
8-bit or 12-bit monotonic output
left or right data alignment in 12-bit mode
synchronized update capability
external triggers for conversion
1x Temperature sensor
conversion range is between 1.8V < VDDA < 3.6V
internally connected to the ADC1_IN16 input channel
1x USB 1.1 device interface
USB device peripheral
compatible with the USB full-speed 12 Mbit/s
2x CAN 2.0A & B (active)
up to 1 Mbit/s
standard frames with 11-bit identifiers
extended frames with 29-bit identifiers
3x transmit mailboxes, 2x receive FIFOs with 3 stages
28 scalable filter banks
256 bytes of SRAM allocated to each CAN
1x JTAG

1/14/2014

EC32L | eConais

Page 7 of 7

25x GPIOs
Most of the GPIO pins are shared with digital or analog alternate functions
maximum I/O toggling up to 84 MHz
1x Random number generator (RNG)
RNG that delivers 32-bit random numbers

Special
Features

1) MPU2) DSP with FPU3) True random number generator (RNG)4) ART Accelerator
(Adaptive real-time accelerator) allowing 0-wait state execution from Flash memory5) Dedicated
PLL for audio I2S application. It allows to achieve error-free I2S sampling clock accuracy without
compromising on the CPU performance, while using USB peripherals.

United States HQ
eConais Inc.
2635 North 1st St.,
Suite 128
San Jose, CA 95134
tel: 408-726-3600
email:
[email protected]
Google+Google+

Europe R&D
eConais A.E.
8A Nirvana Pavlou
Street
26443 Patra,
Achaea, Greece
tel/fax: +30 2610
463004
email:
[email protected]

US Sales, email:
[email protected]
Europe Sales, email:
[email protected]
China & HK Sales,
email:
[email protected]
Japan Sales, email:
[email protected]

http://www.econais.com/products/wismart-modules/ec32l

Terms &
Conditions
Privacy
Policy
Contact us
About Us

1/14/2014