Open navigation menu
Close suggestions
Search
Search
en
Change Language
Upload
Sign in
Sign in
Download free for days
86%
(14)
86% found this document useful (14 votes)
63K views
28 pages
Solved Problems, Fluid Statics
Solved Problems,Fluid Statics
Uploaded by
Kaffel
AI-enhanced title
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content,
claim it here
.
Available Formats
Download as PDF or read online on Scribd
Download
Save
Save Solved Problems,Fluid Statics For Later
Share
86%
86% found this document useful, undefined
14%
, undefined
Print
Embed
Report
86%
(14)
86% found this document useful (14 votes)
63K views
28 pages
Solved Problems, Fluid Statics
Solved Problems,Fluid Statics
Uploaded by
Kaffel
AI-enhanced title
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content,
claim it here
.
Available Formats
Download as PDF or read online on Scribd
Carousel Previous
Carousel Next
Download
Save
Save Solved Problems,Fluid Statics For Later
Share
86%
86% found this document useful, undefined
14%
, undefined
Print
Embed
Report
Download
Save Solved Problems,Fluid Statics For Later
You are on page 1
/ 28
Search
Fullscreen
CHAPTER 2 Fluid Statics 2.1 For the dam shown in Fig. 2-1, find the horizontal pressure acting at the face of the dam at 20-ft depth. ' P= yh = (62.4)(20) = 1248 lb/ft? 2.2 For the vessel containing glycerin under pressure as shown in Fig. 2-2, find the pressure at the bottom of the tank. ' p= 50+ yh = 50+ (12.34)(2.0)=74.68kN/m? or 74.68kPa SOkPa Glycerin 2m Fig. 22 23 Ifthe pressure in a tank is 50 psi, find the equivalent pressure head of (a) water, (b) mercury, and (c) heavy fuel oil with a specific gravity of 0.92. i h=ply. @ (50)(144)]/62.4 = 115.38 ft ® f= [(50)(144)]/847.3 = 8.50 ft o = [(50)(144)}/1(0.92)(62.4)] = 125.42 ft26 0 CHAPTER 2 24 28 26 27 29 2.10 it 212 213 A weather report indicates the barometric pressure is 29.75 in of mercury. What is the atmospheric pressure in pounds per square inch? t p= yh =[(13.6)(62.4)][(29.75/12)]/144 4.61 Ib/in? or 14.61 psi Find the atmospheric pressure in kilopascals if a mercury barometer reads 742 mm. ' p= yh =(133.1)(H%) =98.8KN/m? or 98.8 kPa A pressure gage 7.0m above the bottom of a tank containing a liquid reads 64.94 kPa; another gage at height 4.0 m reads 87.53 kPa. Compute the specific weight and mass density of the fluid. ' = Ap/Ah = (87.53 ~ 64.94)/(7.0 ~ 4.0) =7.53kN/m? or 7530.N/m* p= /g = 7530/9.81 = 786 kg/m? AA pressure gage 19.0 ft above the bottom of a tank containing a liquid reads 13.19 psi; another gage at height 14.0 ft reads 15.12 psi. Compute the specific weight, mass density, and specific gravity of the liquid. ' Ap=y(Ah) (15.12 -13.19)(144) = (7)(19.0- 14.0) = 55.6 1b/ft p=yig=55.6/32.2=1.73slugif? sg. = 55.6/62.4= 0.891 ‘An open tank contains 5.7 m of water covered with 2.8 m of kerosene (y = 8.0 kN/m’). Find the pressure at the interface and at the bottom of the tank. ' Pi = Yh Poo = 224+ (9.79)(5.1) = 78.2 kPa ‘An open tank contains 9.4 ft of water beneath 1.8 ft of oil (s.g. = 0.85). Find the pressure at the interface and at the bottom of the tank. ' Pru = yh = [(0.85)(62.4)](1.8)/144 = 0.663 psi Prue = 0.663 + (62.4)(9.4)/144 = 4.74 psi If air had a constant specific weight of 0.076 Ib/ft? and were incompressible, what would be the height of the atmosphere if sea-level pressure were 14.92 psia? ' f= ply = (14.92)(144)/0.076 = 28 270 ft If the weight density of mud is given by y = 65.0-+0.2h, where 7 is in Ib/ft? and depth his in ft, determine the pressure, in psi, at a depth of 17 ft. I dp = y dh = (65.0 + 0.2h) dh. Integrating both sides: p = 65.0h + 0.1h?. For h = 17 ft: P= (65.0)(17)/144 + (0.1)(17)?/144 = 7.87 psi. If the absolute pressure in a gas is 40.0 psia and the atmospheric pressure is 846 mbar abs, find the gage pressure in (a) Ibfin’; (b) kPa; (c) bar. '@ Pau = (846)(0.0145) = 12.3 Ib/in® gage = 40.0 — 12.3 = 27.7 Ib fin® (5) Pana = (40.0)(6.894) = 276 KPA — Pam = (846)(0.100) = 85 KPa gage = 276 — 85 = 191 kPa © Pain = 40.0/14.5 = 2.759 bar Prange = 2-759 ~ 0.846 = 1.913 bar If the atmospheric pressure is 0.900 bar abs and a gage attached to a tank reads 390 mmHg vacuum, what is the absolute pressure within the tank? ! P=Yh Pum =0.900X 100 = 90.0 kPa Pasee = [(13.6)(9.79)](G) = 51.9 kPa vacuum or 51.9 kPa Paw = 90.0 + (51.9) = 38.1 kPa24 2s 216 247 FLUID STATICS J 27 It atmospheric pressure is 13.99 psia and a gage attached to a tank reads 7.4 inHg vacuum, find the absolute pressure within the tank. ' P=Vh Page = [(13.6)(62.4)]|(7.4/12)/144] = 3.63 psi vacuum or 3.63 psi Pan = 13.99 + (—3.63) = 10.36 psia ‘The closed tank in Fig. 2-3 is at 20°C. If the pressure at point A is 98 kPa abs, what is the absolute pressure at point B? What percent error results from neglecting the specific weight of the air? Fat Yastac Yeyohve - Yuchon = Po, 98 + (0.0118)(5) — (9.790)(5 — 3) — (0.0118)(3) = py = 78.444 kPa. Neglecting ait, pp = 98 — (9.790)(S — 3) ~ 78.420 kPa; error = (78.444 — 78.420)/78.444 = 0.00031, or 0.031%. h3+—3 ‘The system in Fig. 2-4 is at 70°F. If the pressure at point A is 2900 Ib/ft?, determine the pressures at points B, C, and D. ' Px = 2900~ (62.4)(4~ 3) =28381b/ft? pp = 2900+ (62.4)(6) = 3274 Ib/ft? Pc = 2900 + (62.4)(6 — 2) — (0.075)(5 +3) = 3149 Ib/ft? ce att air | Air ett Water 7 Fig. 24 ‘The system in Fig. 2-5 is at 20°C. If atmospheric pressure is 101.03 kPa and the absolute pressure at the bottom of the tank is 231.3 kPa, what is the specific gravity of olive oil?” H 101.03 + (0.89)(9.79)(1.5) + (9.79)(2.5) + (s.g.)(9.79)(2.9) + (13.6)(9.79)(0.4) = 231.3 sg. 1.39 Olivet | 29m Fig. 25['s 28 0 CHAPTER 2 Hp, =(62.4)(4-+ 2) = 374 lb/ft, py = —(62.4)(2) = ~125 Ib/fe, Neglecting ait, pc = Po Po = 125— (62.4)(4 +2 +2) = —624 lb/ft’ 125 Ib/fe; f 2.18 Find the pressures at A, B, C, and D in Fig. 2-6. Fig. 26 2.49 The tube shown in Fig. 2-7 is filled with oil. Determine the pressure heads at A and B in meters of water. Figo) (7x20) = (hon) Yoa) = (Hoa (6-8-04)(Yu,0)]; therefore, hys,0 = (toi)(6-8-oi)- Thus, ha = (2.2 + 0.6)(0.85) = —2.38 m H0 and hy = (—0.6)(0.85) = ~0.51 m H,0. Fig. 2-7 pq =~(0.4+0.4)(9.790) = ~7.832 kPa; pp = (0.5)(9.790) = 4.895 kPa. Neglecting air, pc = pa = 4.895 kPa; 4,895 + (0.9)(9.790)(1 + 0.5 + 0.4) = 21.636 kPa. b 2.21 Convert 9psi to (a) inches of mercury, (b) feet of water, (c) feet of ichor (s.g. = 2.94). BH (@) b= p/y =[(9)(144)\/[(13.6)(62.4)] = 1.527 ft, or 18.33 ing, (9)(144)]/62.4 = 20.77 ft of water (9)(144)]/{(2.94)(62.4)] = 7.06 ft ichor 2.22 Express an absolute pressure of 5 atm in meters of water gage when the barometer reads 760 mmHg. t Pan = (5)(101.3)/9.79 = 51.74m of water — Paem = (0.760)(13.6) = 10.34 m of water Pevee= 51-74 ~ 10.34 = 41.40 of waterf FLUID STATICS 0 29 2.23 Figure 2-9 shows one pressurized tank inside another. If the sum of the readings of Bourdan gages A and B is 34.1 psi, and an aneroid barometer reads 29.90 inHg, what is the absolute pressure at A, in inHg? ' h=ply hat hp =34.1/{(13.6)(62.4)/(12)"] = 69.44 inHg, (hada = 29.90-+ 69.44 = 99,34 inHg Os 7" Fig. 2-9 Determine the heights of columns of water, kerosene (ker), and nectar (s.g. = 2.94) equivalent to 277 mmHg. ' Crrag) (1g) = (Hezg0)( Yis20) = Arcee) Yee) = (nectar) Yocenae) 0.277[(13.6)(9.79)] = (hn,0)(9-79) hyo = 3.77 m 0.2771(13.6)(9.79)] = (hu){(0.82)9-79)] Ig = 4.59 m, 0.271{(13.6)(9.79)] = Ryeaa)(2.94)(9.79)]—Ianaae = 1.28 In Fig. 2-10, if h = 25.5 in, determine the pressure at A. The liquid has a specific gravity of 1.85. ' p= yh =((1.85)(62.4)][25.5/12] = 245.3 Ib/fE or 1.70 psi Fig. 2-10 2.26 For the pressure vessel containing glycerin, with piezometer attached, as shown in Fig. 2-11, what is the pressure at point A? ! = yh = [(1.26)(62.4)|(40.8/12) = 267 Ib/tt? Open to atmosphere \40.8i0 Glycerin Fig. 2-1130 0 CHAPTER 2 2.27 2.28 2.29 For the open tank, with piezometers attached on the side, containing two different immiscible liquids, as shown in Fig. 2-12, find the (a) elevation of the liquid surface in piezometer A, (6) elevation of the liquid surface in piezometer B, and (c) total pressure at the bottom of the tank. I @ Liquid A will simply rise in piezometer A to the same elevation as liquid A in the tank (i.e, to elevation 2m). (6) Liquid B will rise in piezometer B to elevation 0.3 m (as a result of the pressure exerted by liquid B) plus an additional amount as a result of the overlying pressure of liquid A. The overlying pressure can be determined by p = yh = {(0.72)(9.79)](2 — 0.3) = 11.98kN/m?. The height liquid B will rise in piezometer B as a result of the overlying pressure of liquid A can be determined by h = p/y = 11.98/{(2.36)(9.79)] = 0.519 m. Hence, liquid B will rise in piezometer B to an elevation of 0.3 m + 0.519 m, or 0.819 m. (©) Proetom = {(0.72)(9.79)|(2 — 0.3) + [(2.36)(9.79)](0.3) = 18.9 kPa. 4B 8 Liguid 4 \ (se =072) | i Bt 03m Liquid 8 = 236 Hom ere) Fig. 2-12 The air-oil-water system shown in Fig. 2-13 is at 70°F. If gage A reads 16.1 Ib/in’ abs and gage B reads 2.00 ib/in? less than gage C, compute (a) the specific weight of the oil and (6) the reading of gage C. H (a) (16.1)(144) + (0.0750)(3) + (Yoa)(2) = pa» Pa + (You)(2) + (62.4)(3) = pe. Since pc ~ Pa ((Yoa)(2) + (62.4)(3) = (2.00)(144), yu = 50.4 Ib/f. (B) (16.1)(144) + (0.0750)(3) + (50.4)(2) Po = 2419 1b/fE; po = 2419 + (2.00)(144) = 2707 lb/ft, or 18.80 1b/in?. 462 Ib in? abs Air att }__Z__j att on a al att ‘B att B, Fig. 2-13 For a gage reading at A of ~2.50 psi, determine the (a) elevations of the liquids in the open piezometer columns E, F, and G and (6) deflection of the mercury in the U-tube gage in Fig. 2-14. Neglect the weight of the air. I (a) The liquid between the air and the water would rise to elevation 49,00 ft in piezometer column E as a result of its weight. The actual liquid level in the piezometer will be lower, however, because of the vacuum in the air above the liquid. The amount the liquid level will be lowered (f in Fig. 2-14) can be determined byFLUID STATICS 2 31 (-2.50)(144) + [(0.700)(62.4)](h) = 0, h = 8.24 ft. Elevation at L = 49.00~ 8.24 = 40.76 ft; (-2.50)(144) + {(0.700)(62.4)][49.00 — 38.00) = pu, py = 120.51b/ft. Hence, pressure head at M = 120.5/62.4 = 1.93 ft of water. Elevation at N= 38.00 + 1.93 = 39.93 ft; 120.5 + (62.4)(38.00 — 26.00) = po, Po = 869.3 lb/ft. Hence, pressure head at O = 869.3/{(1.600)(62.4)] = 8.71 ft (of the liquid with s.g. = 1.600). Elevation at Q = 26.00 + 8.71 = 34.71 ft. (b) 869.3 + (62.4)(26.00 ~ 14,00) ~ [(13.6)(62.4)](h,) = 0, fy = 1.91 ft. ch pe EL 14,00 ft Fig. 2-14 2.30 A vessel containing oil under pressure is shown in Fig. 2-15. Find the elevation ofthe ol suriae in the attached piezometer. 1 Elevation of oil surface in piezometer = 2 + 35/[(0.83)(9.79)] = 6.31 m Air pressure = 35 kPa Flev.2.m oi | (sg = 083) | | | Ly Elev.0m{ Fig. 2-15 231 The reading of an automobile fuel gage is proportional to the gage pressure at the bottom of the tank (Fig. 2-16). Ifthe tank is 32.cm deep and is contaminated with 3 em of water, how many centimeters of air remains at the top when the gage indicates “full”? Use Yquine = 6670 N/m? and Yue= 11.8N/m?. 1 When full of gasoline, pyye = (6610)(0.32) =2134 Pa. With water added, 2134 = (9790)(0.03) + (6610){(0.32~ 0.03) ~ 4] + (11.8)(h), = 0.0141 m, or 1.41 em,32 0 CHAPTER 2- 2.32 2.34 (eve De e 3ecm| Gasoline 4 Water em % Fig. 2:16 ‘The hydraulic jack shown in Fig. 2-17 is filled with oil at 55 Ib/ft?. Neglecting the weight of the two pistons, what force F on the handle is required to support the 2200-Ib weight? I The pressure against the large and the small piston is the same. p = W/Aurye = 2200/{21(2)*/4] = 44818 lb/ft. Let P be the force from the small piston onto the handle. P = PAu = (44 818)[2¢((s)?/4] = 244 Ib. For the handle, EM, = 0= (16 + 1)(F) ~ (1)(244), F=14.41b. 2200 tb a pcb en 4 S Lin diameter Fig. 2:17 Figure 2-18 shows a setup with a vessel containing a plunger and a cylinder. What force Fis required to balance the weight of the cylinder if the weight of the plunger is negligible? ' 10 000/500 — [(0.78)(62.4)](15)/144= F/S F=74.61b F=? Cylinder Weight = 10000 i Cross-sectional [sca = 500 iat Oil eg = 078) Fig. 2-18 For the vertical pipe with manometer attached, as shown in Fig. 2-19, find the pressure in the oil at point A. ' Pa + {(0-91)(62.4)](7.22) ~ [(13.6)(62.4)](1.00)=0 4 =438.71b/ft? or 3.05 Ib/in*FLUID STATICS 1 33 6g =091) o [7.22 | Mercury Ge= 16 Fig. 2-19 ‘A monometer is attached to a tank containing three different fluids, as shown in Fig. 2-20. What will be the difference in elevation of the mercury column in the manometer (i.e., y in Fig. 2-20)? ' 30 + [(0.82)(9.79)](5 —2) + (9.79)(2 — 0) + (9.79)(1.00) — {(13.6)(9.79)]y=0 y= 0.627m Elev. 6 m Bev. 5m r oil (4 = 082) Blev.2.m Water Elev.0m 100 m|| — Mercury = 136) Fig. 2-20 2.36 Oil of specific gravity 0.750 flows through the nozzle shown in Fig. 2-21 and deflects the mercury in the U-tube gage. Determine the value of h if the pressure at A is 20.0 psi. ' 20.0 + {(0.750)(62.4)](2.75 +.h)/144 — [(13.6)(62.4)(h)/144=0 hh =3.75ft34 0 CHAPTER 2 Fig. 221 : 2.37 Determine the reading h in Fig. 2-22 for p, = 39 kPa vacuum if the liquid is kerosene (s.g. = 0.83). ' =39 + ((0.83)(9.79)]h = = 4.800m 4 i : i HE Fig. 2-22 2.38 In Fig. 2-22, the liquid is water. If h = 9in and the barometer reading is 29.8 inHg, find p, in feet of water absolute. i Pat is =(13.6)(29.8/12) —_p, =33.0ft of water absolute 2.39 In Fig. 2-23, s.g., = 0.84, s.g.2= 1.0, z= 96mm, and h, = 159mm. Find p, in mmHg gage. If the barometer reading is 729 mmHg, what is p, in mmH,O absolute? ' Pa + (0.84)(96) ~ (1.0)(159)=0 Pa= 78.4 mmH,O gage = 78.4/13.6 = 5.76 mmHg gage 8.4 + (13.6)(729) = 9993 mmH,O absolute 240 At 20°C, gage A in Fig. 2-24 reads 290 kPa abs. What is the height h of water? What does gage B read? ' 290 — [(13.6)(9.79)](7%) -9.79h =175 hh =2.227m Pa (9.79) 35+ 2.227) =175 py = 204kPa241 2.44 FLUID STATICS J 35 ‘Air: 175 kPa abs { Water 70cm Mercury ‘SD ga ‘The U-tube shown in Fig. 2-25a is 10 mm in diameter and contains mercury. If 12.0 mL of water is poured into the right-hand leg, what are the ultimate heights in the two legs? After the water is poured, the orientation ofthe liquids willbe as shown in Fig. 2-250; h = (12.0 x 10° mm”)/(5 mm)? = 152.8 mm, (13.6)(240 — L) = 13.6L + 152.8, L = 114.4 mm. Left leg height above bottom of U-tube = 240 — 114.4 = 125.6 mm; right leg height above bottom of U-tube = 114.4 + 152.8= 267.2 mm. Mercury 120mm 120mm h t xs ceo mn Fig. 2-25(a) 120mm Fig. 2-25(6) ‘Assuming sea water to have a constant specific weight of 10.05 kN/m?, what is the absolute pressure at a depth of 10km? ' p= 1+ (10.05)(10 000)/101.3 = 993 atm In Fig. 2-26, fluid 2 is carbon tetrachloride and fluid 1 is benzene. If Pam is 101.5 kPa, determine the absolute pressure at point A. ' 101.5 + (15.57)(0.35) ~ (8.62)(0.12) =p, pa = 105.9kPa atm 35em - taem + fluid 2 Fig, 2-26 In Fig. 2-27a, the manometer reads 4 in when atmospheric pressure is 14.7 psia. If the absolute pressure at A is doubled, what is the new manometer reading? pa + (62.4)(3.5) ~ [(13.6)(62.4)|(4) = (14.7)(144), pa = 2181 Ib/ft. If p, is doubled to 4362 Ib/f?, the ‘mercury level will fall x inches on the left side of the manometer and will rise by that amount on the right side of the manometer (see Fig. 2-276). Hence, 4362 + (62.4)(3.5 + x/12) — [(13.6)(62.4)][(4 + 2x)/12] = (14.7)(144), x= 16.0in, New manometer reading = 4 + (2)(16.0) = 36.0in.36 0 CHAPTER 2 Water att asty a4 + a | ear ae in Mercury Fig. 2-27(a) Fig. 2-27(5) 2.45 In Fig. 2-284, A contains water, and the manometer fluid has density 2900 kg/m’. When the left meniscus is at zero on the scale, p= 100 mm of water. Find the reading of the right meniscus for p, = 10 kPa with no adjustment of the U-tube or scale. I First, determine the reading of the right meniscus for p = 100 mm of water (see Fig. 2-286): 100 + 500 - 2,90h = 0, h =206.9 mm. When p= 10kPa, the mercury level will fall some amount, d, on the left side of the manometer and will rise by that amount on the right side of the manometer (see Fig. 2-280). Hence, 10/9.79 + (500 + d)/1000 ~ {(206.9 + 2d)/1000](2.90) = 0, d = 192.0 mm. Scale reading for p, = 10 kPa is 206.9 + 192.0, or 398.9 mm. 500mm y Fig. 2:28(a) Fig. 2-28(6) E 246 A manometer is attached to a conduit, as shown in Fig. 2-29. Calculate the pressure at point A. ' Pat (62.4){(5 + 15)/12] ~ ((13.6)(62.4)](3)=0 pa =9571b/ft° Water Mercury (8 = 135) Fig. 2-29 2.47 A manometer is attached to a pipe containing oil, as shown in Fig. 2-30. Calculate the pressure at point A. ' Pa +{(0.85)(9.79)](0.2) ~ (9.79)(1.5)=0 pa = 13.02 KN/m?FLUID STATICS 0 37 Water ig, 2.30 248 — Amonometer is attached to a pipe to measure pressure, as shown in Fig. 2-31. Calculate the pressure at point A. i Pat (62.4)(48) — [(13.6)(62.4)|(&) =0 pa = 331 Ib/ fe ‘ Water + Orifice Mercury 66-130 Fig. 231 249 A glass U-tube open to the atmosphere at both ends is shown in Fig. 2-32. if the U-tube contains oil and water as shown, determine the specific gravity of the oil. ' [(6-B-01)(9-79)}(0.35) — (9-79)(0.30)=0 5.8.00 = 0.86 Water Fig. 2.3238 0 CHAPTER 2 2.50 251 282 AA differential manometer is shown in Fig. 2-33. Calculate the pressure difference between points A and B. Ha +{(0.92)(62.4)I{e + 12)/12] ~ [(13.6)(62.4)]() ~ [(0.92)(62.4)] + 24)/12] = Pe Pa Po= 906 Ib/fe Oil (sg. = 092) Oil (sg, = 092) ‘Mercury (sg. = 13.6) Fig. 233 AA differential manometer is attached to a pipe, as shown in Fig. 2.34. Calculate the pressure difference between points A and B. ' Pa + {(0.91)(62.4)](y/12) ~ [(13.6)(62.4)](4) — [(0.91)(62.4)]1( — 4)/12] = Ps Pa~Pa= 264 lb/ft fereury (2 = 13.6) Fig. 2.34 AA differential manometer is attached to a pipe, as shown in Fig. 2-35. Calculate the pressure difference between points A and B. ' Pa~ [(0.91)(62.4)}(y/12) — [(13.6)(62.4)] (4%) + [(0.91)(62.4)][(y + 4)/1: Pa~Pa Mercury G2= 16) | (sg = 091) Q Fig. 235FLUID STATICS 0 39 283 For the configuration shown in Fig. 2-36, calculate the weight of the piston if the gage pressure reading is, 70.0 kPa, 1 Let W = weight of the piston. W/[()(1)*/4] - [(0.86)(9.79)](1) = 70.0, W = 61.6 kN. ftom diameter —+} ' | Piston: | = oll (se = 086) Fig. 2.36 254 A manometer is attached to a horizontal oil pipe, as shown in Fig. 2-37. If the pressure at point A is 10 psi, find the distance between the two mercury surfaces in the manometer (i.e., determine the distance y in Fig. 2-37). ' (10)(144) + [(0.90)(62.4)](3 + y) - 1(13.6)(62.4)]y=0 y=2.03 ft or 24.4in T oA Oi (s¢. = 090) Lt secu oe = 136) Fig. 237 255 A vertical pipe with attached gage and manometer is shown in Fig. 2-38. What will be the gage reading in pounds per square inch if there is no flow in the pipe? f i Gage reading + {(0.85)(62.4)|(2 + 8)/144 — ((13.6)(62.4)](18)/144=0 Gage reading = 5.16 psi 256 A monometer is attached to a vertical pipe, as shown in Fig. 2-39. Calculate the pressure difference between points A and B. ' Pa— (62.4)(5 + 1) ~ [(13.6)(62.4)](2) + (62.4)(2+ 1) =Pa Pa-Po=18841b/ft? or 13.1 Ib/in® 2.51 A manometer is attached to a water tank, as shown in Fig. 2-40. Find the height of the free water surface above the bottom of the tank. | t (9.79)(H — 0.15) — {(13.6)(9.79)\(0.20)=0 H=287m40 0 CHAPTER 2 “OH (sg = 085) (5-136) Fig. 2:38 y y é Mercury (3. = 136) water Fig. 239FLUID STATICS 2 41 He? Water Mercury = 136) Fig. 2-40 258 A differential manometer is attached to two tanks, as shown in Fig. 2-41. Calculate the pressure difference between chambers A and B. 1 ‘Pat [(0.89)(9.79)](1.2) + [(13.6)(9.79)](0-3) — [(1.59)(9.79)](0.8) = Pa ST.LKN/m? (i.e, Pa > Pa) Pa~Pi Chamber A SAE 30 oil Chamber B Lt —— | Carbon tetrachloride y [08 m i 03m - = Mercury Fig. 2-41 Calculate the pressure difference between A and B for the setup shown in Fig. 2-42. a+ (62-4)(66.6/12) — ((13.6)(62.4)](40.3/12) + (62.4)(22.2/ 12) — [(43.6)(62.4)](30.0/12) ~ (62.4)(10.0/12) = ps Pa~Px=4S62Ib/f2 or 31.7 Ib/in® Calculate the pressure difference between A and B for the setup shown in Fig. 2-43. ' pa (9.79) ~ [(0.8)(9.79)}0.70) + (9.79)(« 0.80) =P» Pa Px = 13.3 KN/mm* Caleulate the pressure difference between A and B for the setup shown in Fig. 2-44. ' Pat (62.4)(x +4) ~ [(13.6)(62.4)](4) + (62.4)(7 - 2) = Pa Pa~Pa=27081b/f2 or 18.81b/in*42 0 CHAPTER 2FLUID STATICS J 43 Merry (¢e= 135) ig 24g 26 Vessels A and B in Fig. 2-45 contain water under pressures of 40.0 psi and 20.0 psi, respectively. What is the deflection of the mercury in the differential gage?” H (40.0)(144) + (62.4)(x + h) — [(13.6)(62.4)]h + 62.4y = (20.0)(144). Since x + y = 16.00 — 10.00, or 6.00 ft, has ft, 263 Fora gage pressure at A in Fig. 2-46 of ~1.58 psi, find the specific gravity of gage liquid B. I (-1.58)(144) + [(1.60)(62.4)](10.50 — 9.00) — (0.0750)(11.25 ~ 9.00) + [(8-8-ug »)(62.4)](11.25 — 10.00) = 02.64 2.65 2.66 3 CHAPTER 2 10.500 | Fig. 2-46 In Fig. 2-47, liquid A weighs 53.5 Ib/fe? and liquid B weighs 78.8 Ib/ft’. Manometer liquid M is mercury. If the pressure at B is 30 psi, find the pressure at A. i Pa — (53.5)(6.5 + 1.3) + [(13.6)(62.4)}(1.3) + (78.8)(6.5 + 10.0) = (30)(144) Pa = 2334 1b/ft? or isk Fig. 2-47 ‘What would be the manometer reading in Fig. 2-47 if p» — pa is 165 kPa? I Converting to Ib/ft?, p» ~ pa = 3446 Ib/ft?, The mercury level will rise some amount, x, on the left side of the manometer and will fall by that amount on the right side of the manometer (see Fig. 2.48). Hence, taking weight densities from Prob. 2.64, p4 — (53.5)(6.5 + 1.3 + x) + [(13.6)(62.4)](1.3 + 2x) + (78.8)(6.5 + 10.0-x) = Poy 1644x + 1986 = py — pa = 3446, x = 0.89 ft; manometer reading = 1.3 + (2)(0.89) = 3.08 ft. Fig. 2-48 In Fig. 2-49, water is contained in A and rises in the tube to a level 85 in above A; glycerin is contained in B. ‘The inverted U-tube is filled with air at 23 psi and 70°F. Atmospheric pressure is 14.6 psia. Determine theFLUID STATICS 0 45 difference in pressure (psi) between A and B if y is 16in. What is the absolute pressure in B in inches of ‘mercury and in feet of glycerin? ' Pa (62-4\(8)=(23)(144) p= 3754.01b/fe° Pa — [(1.26)(62.4)][(85—16)/12] = (23)(144) pp» = 3764.1 lb/ft? Pa Pa = 3754.0 — 3764.1 = —10.1 Ib/ft? or —0.070 Ib/in® (3764.1/144 + 14.6)/{(13.6)(62.4)/(12)°] = 83.0 inHg, (3764.1/144 + 14.6)/{(1.26)(62.4)/(12)"] = 895.4 in or 74.6 ft of glycerin (Pade (Pada &v “3 LL Fig. 2-49 2.67 Gas confined in a rigid container exerts a gage pressure of 150 kPa when its temperature is 7°C, What pressure would the gas exert at 67°C? Barometric pressure remains constant at 719 mmHg, ! Pam ™ ((13.6)(9.79)](0.719) = 95.7 KPa any = 95.7 + 150= 245.7 kPa PAVIT,=p2VilTz — 245.7)(V)I(273 +7) = (p.(V)/(273 +67) [V (volume) is constant] P= 298.4 kPa (absolute) = 298.4 ~ 95.7 = 202.7 kPa (gage) 2.68 In Fig. 2-50, atmospheric pressure is 14.6 psia, the gage reading at A is 6.1 psi, and the vapor pressure of the alcohol is 1.7 psia. Compute x and y. 4 Working in terms of absolute pressure heads, {(6.1 + 14.6)(144)}/{(0.90)(62.4)] — x (4.7)(144)/{(0.90)(62.4)], x = 48.72 ft; [(6.1 + 14,6)(144)]/[(0.90)(62.4)] + (y + 4.2) — (4.2)(13.6/0.90) =0, y = 6.19 ft. ‘Alcohol vapor only Alcohol 89.2090 Mecuy Fie. 2.50 2.6 In Fig. 2-50, assume the following: atmospheric pressure = 858 mbar abs, vapor pressure of the alcohol = 160 mbar abs, x = 2.90 m, y = 2.10m. Compute the reading on the pressure gage (p,) and on the manometer (2).&F 46 0 CHAPTER 2 4H Working in terms of absolute pressure heads, [(p.4)age + 858](0.100)/[(0.90)(9.79)] ~ 2.90 = (160)(0.100)/{(0.90)(9.79)], (Pa)gae = ~442 mbar; ((—442 + 858)(0.100)]/{(0.90)(9.79)] + (2.10 + 2) — (2)(3.6/0.90) =0, 2 = 0.483 m. 2.70 A pipeline contains an incompressible gas (y = 0.05 Ib/f) at rest; at point A the pressure is 4.69 in of water. ‘What isthe pressure, in inches of water, at point B, 492. higher than A? 4 The change in pressure in the atmosphere must be considered; assume, however, that y., = 0.076 Ib/ft? is constant. (Pal Yan = (Pal Yon + 4.69/12 ft of water @ (Pal Yan = (Po! Ym + x/12 ft of water Q Subtracting Eq. (2) from Eq. (1), (Pal Pan = (Pal Yam = (Pal Ym ~ (Pa! Yam + 4.69/12 = x/12 @ (Pal Yum = (Pa! Y) 192 ft of air = (492)(0.076/62.4) = 0. (Pal Pave ~ (Pa! Y)ane = 492 ft of gas = (492)(0.05/62.4) Substituting these relationships into Eq. (3), 0.394 = 0.599 + 4.69/12 ~x/12, x = 7.15 in of water. 2.71 Determine the pressure difference between points A and B in Fig. 2-51. Hp + [(0.88)(9.79)](0.21) — [(13.6)(9.79)](0.09) — {(0.82)(9.79)](0.41 — 0.09) + 0.79)(0.41 ~ 0.15) — (0.0118)(0.10) = pp Pa~Pa=10.2kPa Fig. 2-51 2.72 In Fig. 2-52, if pp —p4=97.4 kPa, calculate H. ' Pa ~ (9.79)(H/100) — [(0.827)(9.79)] (ai) + [(13.6)(9.79)][(34 + H + 17)/100] = py 1.234H + 66.53 =py-p,=97.4 HH =25.0em23 214 25 2.16 FLUID STATICS 47 For Fig, 2-53, if fluid 1 is water and fluid 2 is mercury, and z,=0 and z, = —11 cm, what is level z, at which. Pa= Pam? t 0+ (9.79)[0 ~ (~11)]/100 — {(13.6)(9.79)]fz.—(-11)|/100=0 2 Open. Pati 10.19 em ZasPA 2 Fig. 253 ‘The inclined manometer in Fig. 2-S4a contains Meriam red manometer oil (s.g. = 0.827). Assume the reservoir is very large. What should the angle @ be if each inch along the scale is to represent a change of 0.8 Ib/ft? in ‘gage pressure p,? I From Fig. 2-546, Ap = yAz, or 0.8 Ib/ft? = [(0.827)(62.4 Ib/ft°)](4s ft)(sin 8) from which 8 = 10.72°. Reset Fig. 2-54(a) Fig. 2-54(6) ‘The system in Fig. 2-55 is at 20°C. Compute the absolute pressure at point A. i Pa + [(0.85)(62.4)](&) ~ [(13.6)(62.4)](f) + (62.4)(fi) = (14.7)(144) —_p, = 2691 Ib/ft? abs Oagrons werry Fig. 2-55 ‘Very small pressure differences p —p» can be measured accurately by the two-fluid differential manometer shown in Fig, 2-56. Density 9. is only slightly larger than the upper fluid ,. Derive an expression for the proportionality between h and p,~ pp if the reservoirs are very large. pa + a.gh,— pagh ~ 2.8 (hs — h) =a, Pa~ Pa = (D2— 2,)8h. If (2 ~ px) is small, h will be large (sensitive).48 0 CHAPTER 2 2.77 Water flows downward in a pipe at 35°, as shown in Fig. 2-57. The pressure drop p, ~ p2is partly due to gravity and partly due to friction. The mercury manometer reads a 5-in height difference. What is the total pressure drop p,— pz? What is the pressure drop due to friction only between 1 and 2? Does the manometer reading correspond only to friction drop? i Pat (62.4)(6 sin 35° + x/12 + #3) — [(13.6)(62.4)](i3) — (62.4)(2/12) = pz Pi~P.=11291b/ft? (total pressure drop) Pressure drop due to friction only = {(13.6)(62.4) — 62.4](#) = 327.6 Ib/f ‘Manometer reads only the friction loss. Fig. 257 2.78 Determine the gage pressure at point A in Fig. 2-58. FH pa—(9.79)(0.50) + (0.0118)(0.33) + [(13.6)(9.79)](0.17) — [(0.83)(9.79)](0.44)=0 py = 14.17 KPa Pam Water Mercury Fig. 2-58 2.79 In Fig. 2-59, calculate level h of the oil in the right-hand tube. Both tubes are open to the atmosphere. 1 0+ (9.79)(0.110 + 0.240) ~ [(0.83)(9.79)|(0.240+h)=0 k= 0.1817 m= 181.7 mm - A 10mm oil, 3.g.2083 | 240mm 280mm WaterFLUID STATICS J 49 2.80 In Fig, 2-600 the inclined manometer measures the excess pressure at A over that at B. The reservoir diameter is 2.5 in and that of the inclined tube is }in. For @ = 32° and gage fluid with s.g. = 0.832, calibrate the scale in Psi per ft. ' Pa=y(Ah+Ay)+pe (see Fig. 2-606) pa —py = y(Ah + Ay) From Fig. 2-606, (A4)(Ay) = (As)(R) or Ay = AgR/Ay, Ah =R sin 8, pa — py = (R sin 0+ ApR/A,) = YR(sin 8+ An/Aa), An/Ay~ [2(3)°/4]/[x(2.5)*/4] = ths Pa ~ pn = [(0.832)(62.4)](R)(sin 32° + yfg)/144 = 0.1947R. The scale factor is thus 0.1947 psi/tt. tt Fig. 2-60(6) 2.81 Determine the weight W that can be equilibrated by the force acting on the piston of Fig. 2-61. ' Pi=P2=RIA= BJA, 1.25/{4(35)*/4] = W/[4(250)/4] W=63.8kN 250 mm diam 35mm diam PA w nw on Fig. 2-61, 2.82 Neglecting the container’s weight in Fig. 2-62, find the force tending to lft the circular top CD. ' Peo —[(0.8)(62.4)\(4)=0 pen = 199.7 Ib/tt? F = pA = (199.7)[(2.5)?/4] = 980 1b att ¢ i Eee 20mm [+3 in. diam —A ou iT s.g.20850 0 CHAPTER 2 2.83 2.84 2.85 2.86 2.87 2.88 2.89 2.90 Find the force of oil on the top surface CD of Fig. 2-62 if the liquid level in the open pipe is reduced by 1.3m. Feo ~((0.8)(62.4)]{4 ~ (1.3)G.281)]=0 pep = -13.241b/fe*(i.e., a downward pressure by CD) F=pA=(-13.24)[(2.5)"/4] = ~65.0 1b A drum 2.25 ft in diameter filled with water has a vertical pipe of 0.70-in diameter attached to the top. How many pounds of water must be poured into the pipe to exert a force of 1500 Ib on the top of the drum? 1 P= F/A=1500/[x(2.25)'/4] =377.31b/f hh = p/y = 377.3/62.4 = 6.05 ft Wargo = (6.05)[x(0.70/12)?/4](62.4) = 1.01 1b In Fig. 2-63, the liquid at A and B is water and the manometer liquid is oil with s.g. = 0.80, A, = 300mm, ‘hz = 200 mm, and h; = 600 mm. (a) Determine p,— pp. (6) If pp = 50 kPa and the barometer reading is 730 mmHg, find the absolute pressure at A in meters of water. 1@ Pa ~ (9.79)( iit) ~ [(0.80)(9.79)](55) + (9-79)(18) = Pa Pa Pn = ~1.37KPa (6) Pa (9.79)(85) ~ [(0.80)(9.79)] (is) + (9-79) (285) = 50 Pa=48.63kPa (gage) = 48.63/9.79 + 78G(13.6) = 14.90 m water (absolute) Fig. 2-63, In Fig. 2-63, s.g.1=1.0, 51 millimeters of water. ' a — (1.0)(269) — (0.96)(269) + (1.0)(1200) = py p,~ pa = ~673 mm of water 0.96, s.g.9=1.0, hy 269 mm, and hy = 1.2m. Compute p,—P» In Fig. 2-63, s 0,58 Find the gage difference (h). Hp ~ (1.0)(300) — (0.94)(h2) + (1.0)(1100) = pp Pa ~ Pa = —360 = —800 + (0.94)(h2) ).94, 8.8.5 = 1.0, hy = 300 mm, hy = 1.1m, and p4— py = ~360 mm of water. 468 mm ‘What is the pressure difference, in pounds per square inch, of a 1000-ft water column? ' P= yh = (62.4)(1000)/144 = 433 psi Find the pressure at a point 9.5 m below the free surface in a fluid whose density varies with depth h (in m) according to p= (450 kg/m") + (11 kg/m) I dp = ydh= pg dh = (g)(450-+ 11h) dh. Integrating both sides: p = (g)(450h + 11h?/2). For h =9.5 m: P= (9.81){(450)(9.5) + (11)(9.5)7/2] = 46.807 kPa. If atmospheric pressure is 29.72 ing, what will be the height of water in a water barometer if the temperature of the water is (a) 50°F, (b) 100 °F, and (¢) 150°F? ' p= yh = [(13.6)(62.4)](29.72/12) = 2102 Ib/f? or 14.60 1b/in’ (a) At 50°F, 7 = 62.4 1b/ft° and Prayer = 25.7/144, oF 0.178 Ib/in?, hnsso = (14.60 — 0.178)(144)/62.4 = 33.28 ft (6) At 100°F, y = 62.0 1b/ft? and Prapor = Hi, OF 0.938 Ib/in’, hy,0 = (14.60 — 0.938)(144)/62.0 (©) At 150°F, 7 =61.210/ft? and Prayer = Hk, OF 3.78 Ib/in*, hi,0 = (14.60 ~ 3.78)(144)/61.2FLUID STATICS J 51 291 A bicycle tire is inflated at sea level (where atmospheric pressure is 14.6 psia and the temperature is 69°F) to 65.0 psi. Assuming the tire does not expand, what is the gage pressure within the tire on the top of Everest (altitude 30 000 ft), where atmospheric pressure is 4.3 psia and the temperature is —38 °F? I Let subscript 1 indicate sea level and subscript 2 indicate altitude 30 000 ft. (Pian = 14.6 465.0=79.6psia —_p,Vi/ T= p.ValTs (79.6)(V)/(460 + 69) = (p:)(V)/[460 + (-38)] (Vis constant) (Pa)ane = 63.5 psia (Padeae = 63.5 — 4.3 = 59.2 psi 2.92 Find the difference in pressure between tanks A and B in Fig. 2-64 if d, = 330 mm, d= 160 mm, d,= 480mm, and d,= 230mm, tf Pa +(9.79)(0.330) — [(13.6)(9.79)](0.480 + 0.230 sin 45°)= py Pa — pp = 82.33 kPa 293 A cylindrical tank contains water at a height of 55mm, as shown in Fig. 2-65. Inside is a smaller open cylindrical tank containing cleaning fluid (s.g. = 0.8) at height h. If py = 13.40 kPa gage and pc = 13.42 kPa gage, what are gage pressure p, and height h of cleaning fluid? Assume that the cleaning fluid is prevented from moving to the top of the tank. ' Pat (9.79)(0.055) = 13.42 p4=12.88kPa 12.88 + (9.79)(0.055~ h) + [(0.8)9.79)]h = 13.40 = 0.00942 m=9.. Air Ora Water | Kerosene Pe Pc Fig. 2-65 294 An open tube is attached to a tank, as shown in Fig. 2-66. If the water rises to a height of 800 mm in the tube, what are the pressures p, and p» of the air above the water? Neglect capillary effects in the tube. ' Pa — (9.79){(800 = 300 — 100)/1000]=0 pp, = 3.92 kPa Pa ~ (9.79){(800 — 300)/1000]=0 py = 4.90 kPa52 0 CHAPTER 2 2.95 For the setup shown in Fig. 2-67, what is the pressure p, if the specific gravity of the oil is 0.82? ' Pa + [(0.82)(9.79)](3) + (9.79)(4 ~ 3) ~ [(13.6)(9.79)}(0.320)=0 p= 8.73 kPa Fig. 267 2.96 For the setup shown in Fig. 2-68, calculate the absolute pressure at a. Assume standard atmospheric pressure, 101.3 kPa. ! 101.3 + (9.79)(0.600 — 0.200) — {(13.6)(9.79)](0.140) + [(0.83)(9.79)](0.140 + 0.090) = p. Pa = 88.44 kPa 2.97 A force of 460N is exerted on lever AB, as shown in Fig. 2-69. End B is connected to a piston which fits into a cylinder having a diameter of 60 mm. What force F, acts on the larger piston, if the volume between C and D is filled with water? I Let Fe = force exerted on smaller piston at Fo/{x(@s)'/4], Fo = 15830 N, or 15.83 KN. = (460)(335) = 843 N. Fe/Ac = Fo/Ap, (843)/[x(;85)'/4] =
You might also like
8609 Quiz
PDF
100% (3)
8609 Quiz
41 pages
Fluid Statics PDF
PDF
No ratings yet
Fluid Statics PDF
28 pages
Chapter 2 Fluid Statics
PDF
0% (1)
Chapter 2 Fluid Statics
29 pages
Chapter 6. Fabric Filters PDF
PDF
No ratings yet
Chapter 6. Fabric Filters PDF
51 pages
Hydraulics-dela-Fuente-Chapter3 Reviewer
PDF
100% (1)
Hydraulics-dela-Fuente-Chapter3 Reviewer
50 pages
2 - Fluid Pressure - Tutorial Solution
PDF
100% (1)
2 - Fluid Pressure - Tutorial Solution
20 pages
Fluid Statics
PDF
No ratings yet
Fluid Statics
5 pages
Salatin Bani Othman Book
PDF
No ratings yet
Salatin Bani Othman Book
92 pages
Ductworkissues PDF
PDF
No ratings yet
Ductworkissues PDF
51 pages
Complete Solution
PDF
No ratings yet
Complete Solution
3 pages
Dissertation Zucchini
PDF
No ratings yet
Dissertation Zucchini
160 pages
Sociology For Business (SOC-201) : Bba 5 Semester
PDF
100% (1)
Sociology For Business (SOC-201) : Bba 5 Semester
87 pages
Are Children Sexual
PDF
No ratings yet
Are Children Sexual
18 pages
Alnahhal Mohammed - PHD Thesis PDF
PDF
No ratings yet
Alnahhal Mohammed - PHD Thesis PDF
192 pages
Solved Problems in Fluid Mechanics-Chapter 1 - Fluid Properties
PDF
100% (3)
Solved Problems in Fluid Mechanics-Chapter 1 - Fluid Properties
24 pages
Principles of Hydrostatics: Unit Pressure or Pressure, P
PDF
No ratings yet
Principles of Hydrostatics: Unit Pressure or Pressure, P
58 pages
1 Fluid Properties
PDF
100% (1)
1 Fluid Properties
37 pages
Chapter 10 Relative Equilibrium On Fluids
PDF
0% (1)
Chapter 10 Relative Equilibrium On Fluids
42 pages
PIV Tracer-Seeding
PDF
No ratings yet
PIV Tracer-Seeding
12 pages
PDF
PDF
No ratings yet
PDF
6 pages
Solution To Problem Set Fluid Mech Pressure
PDF
0% (1)
Solution To Problem Set Fluid Mech Pressure
6 pages
CFD Comparison of Buoyant and Non-Buoyant Jet
PDF
No ratings yet
CFD Comparison of Buoyant and Non-Buoyant Jet
58 pages
Hydraulics Analysis of Dam Assignment Solution
PDF
No ratings yet
Hydraulics Analysis of Dam Assignment Solution
3 pages
Fluid Mechanics II (Chapter 5)
PDF
100% (2)
Fluid Mechanics II (Chapter 5)
10 pages
Is 4894
PDF
No ratings yet
Is 4894
13 pages
FMH Chapter 2 - Problems
PDF
No ratings yet
FMH Chapter 2 - Problems
28 pages
Cueto, Renthel R (Answers To Problem Set 1 On Fluid Mechanics)
PDF
100% (2)
Cueto, Renthel R (Answers To Problem Set 1 On Fluid Mechanics)
21 pages
Solved Problems Forces On Submerged Curved Areas PDF
PDF
50% (8)
Solved Problems Forces On Submerged Curved Areas PDF
23 pages
Module 3.1 Hydraulics
PDF
No ratings yet
Module 3.1 Hydraulics
18 pages
Solved Problems - Fluid Flow - Forces On Submerged Plane Areas
PDF
No ratings yet
Solved Problems - Fluid Flow - Forces On Submerged Plane Areas
24 pages
Industrial Local Exhaust Systems PDF
PDF
No ratings yet
Industrial Local Exhaust Systems PDF
21 pages
Bouhoubeiny 2011 POD
PDF
No ratings yet
Bouhoubeiny 2011 POD
25 pages
D2F5 Getting Started
PDF
No ratings yet
D2F5 Getting Started
22 pages
FRP Specifications
PDF
No ratings yet
FRP Specifications
6 pages
Phys. Fluids 2004 Telib
PDF
No ratings yet
Phys. Fluids 2004 Telib
15 pages
Dams
PDF
No ratings yet
Dams
5 pages
ASTMD6830 - 02 - Standard Test Method
PDF
100% (1)
ASTMD6830 - 02 - Standard Test Method
8 pages
Computation of Turbulent Jets in Annular Counter Flow
PDF
No ratings yet
Computation of Turbulent Jets in Annular Counter Flow
8 pages
Aiaa 2011 3951
PDF
No ratings yet
Aiaa 2011 3951
14 pages
Chen2007 PDF
PDF
No ratings yet
Chen2007 PDF
8 pages
Properties of Fluids: 1.1. Fluid Mechanics and Hydraulics
PDF
No ratings yet
Properties of Fluids: 1.1. Fluid Mechanics and Hydraulics
16 pages
IM BSCE 3 - Hydraulics 1 Chapter 2 2021-2022
PDF
No ratings yet
IM BSCE 3 - Hydraulics 1 Chapter 2 2021-2022
31 pages
BR Flowmaster Tr-Piv
PDF
No ratings yet
BR Flowmaster Tr-Piv
12 pages
Fluid Mechanics 2
PDF
100% (1)
Fluid Mechanics 2
27 pages
EXERCISE (Fluid Statics) : Solution
PDF
100% (4)
EXERCISE (Fluid Statics) : Solution
5 pages
CH2 Problems
PDF
No ratings yet
CH2 Problems
57 pages
Quiz 1 - Group 1
PDF
100% (1)
Quiz 1 - Group 1
5 pages
Jets Rajaratnam
PDF
No ratings yet
Jets Rajaratnam
3 pages
Buoyancy
PDF
100% (6)
Buoyancy
24 pages
Chapter 2
PDF
83% (6)
Chapter 2
15 pages
148 5 PDF Free
PDF
100% (1)
148 5 PDF Free
20 pages
Fan Flaktwoods
PDF
No ratings yet
Fan Flaktwoods
1 page
Questions of Chapter One
PDF
100% (2)
Questions of Chapter One
2 pages
P1 3B Gutierrez JohnPaul
PDF
No ratings yet
P1 3B Gutierrez JohnPaul
5 pages
Chapter 1
PDF
0% (3)
Chapter 1
13 pages
Stability of Floating Bodies
PDF
0% (3)
Stability of Floating Bodies
12 pages
Answer On Question 52989, Physics, Mechanics - Kinematics - Dynamics
PDF
No ratings yet
Answer On Question 52989, Physics, Mechanics - Kinematics - Dynamics
1 page
Module 2 Fluid Statics - Hydrostatic Forces On Plane Surfaces Solved Problems
PDF
100% (3)
Module 2 Fluid Statics - Hydrostatic Forces On Plane Surfaces Solved Problems
5 pages
Chapter 10 Relative Equilibrium On Fluids
PDF
No ratings yet
Chapter 10 Relative Equilibrium On Fluids
42 pages
3 Hydrostatic Force Tutorial Solution
PDF
92% (12)
3 Hydrostatic Force Tutorial Solution
25 pages
Quickie
PDF
0% (1)
Quickie
34 pages
Questions Chapter 2
PDF
100% (1)
Questions Chapter 2
3 pages
Freshly Poured Concrete Approximates A Fluid
PDF
No ratings yet
Freshly Poured Concrete Approximates A Fluid
18 pages
Fluid Mechanics Lesson 2
PDF
75% (8)
Fluid Mechanics Lesson 2
4 pages
Assignment
PDF
100% (1)
Assignment
9 pages
2500 Solved Problems in Fluid Mechanics and Hydraulics Evett
PDF
75% (8)
2500 Solved Problems in Fluid Mechanics and Hydraulics Evett
805 pages
Gis Located Above B)
PDF
100% (1)
Gis Located Above B)
10 pages
Fluid Mechanics Numericals
PDF
77% (26)
Fluid Mechanics Numericals
16 pages
CEP10 Lec2 Fluid Pressure - Section 8
PDF
No ratings yet
CEP10 Lec2 Fluid Pressure - Section 8
33 pages
Enhancement Review Fluid Mech. Set C
PDF
No ratings yet
Enhancement Review Fluid Mech. Set C
10 pages
12 Simple Life Lessons Summary
PDF
No ratings yet
12 Simple Life Lessons Summary
3 pages
LESSON 3: Total Hydrostatic Force on Surface: Where: p = ϒh p = ϒysinθ
PDF
100% (2)
LESSON 3: Total Hydrostatic Force on Surface: Where: p = ϒh p = ϒysinθ
7 pages
Fluid Mechanics
PDF
100% (1)
Fluid Mechanics
6 pages
Modul Aktiviti Pintar Bestari English Form 5 Answers
PDF
100% (1)
Modul Aktiviti Pintar Bestari English Form 5 Answers
35 pages
Fluids M4
PDF
No ratings yet
Fluids M4
21 pages
Bsce 4a
PDF
No ratings yet
Bsce 4a
31 pages
Fluids MechanicsModule Finalize
PDF
No ratings yet
Fluids MechanicsModule Finalize
86 pages
Chapter 32
PDF
No ratings yet
Chapter 32
26 pages
Fluid Mechanics Exercices Enstab Cou SW
PDF
No ratings yet
Fluid Mechanics Exercices Enstab Cou SW
12 pages
123
PDF
No ratings yet
123
13 pages
Solved Problemsfluid Statics
PDF
No ratings yet
Solved Problemsfluid Statics
28 pages
2 Fluid Pressure Tutorial Solution
PDF
No ratings yet
2 Fluid Pressure Tutorial Solution
19 pages
Fluid Mechanics and Hydraulics
PDF
82% (34)
Fluid Mechanics and Hydraulics
54 pages
Crack Width Calculation
PDF
No ratings yet
Crack Width Calculation
3 pages
Chegg p3 Mekflu
PDF
No ratings yet
Chegg p3 Mekflu
10 pages
Guideline-For-Application-For - Energy-Auditor-Accreditation
PDF
No ratings yet
Guideline-For-Application-For - Energy-Auditor-Accreditation
16 pages
Ank White
PDF
No ratings yet
Ank White
16 pages
Bureau 13 d20 Auras
PDF
No ratings yet
Bureau 13 d20 Auras
6 pages
Ute Electrical Engineer
PDF
No ratings yet
Ute Electrical Engineer
14 pages
English As A Second Language: Paper 1: Reading and Writing
PDF
No ratings yet
English As A Second Language: Paper 1: Reading and Writing
6 pages
3rd - REACTION PAPER-SYMPOSIUM UN DESA - CHERRY ANN ARSENAL-final
PDF
No ratings yet
3rd - REACTION PAPER-SYMPOSIUM UN DESA - CHERRY ANN ARSENAL-final
5 pages
A Finite Element-Based Approach For Predictions of Rigid Pile Group Stiffness Efficiency in Clays
PDF
No ratings yet
A Finite Element-Based Approach For Predictions of Rigid Pile Group Stiffness Efficiency in Clays
16 pages
Permutations Combinations
PDF
No ratings yet
Permutations Combinations
8 pages
Fourier Series
PDF
No ratings yet
Fourier Series
12 pages
Science, The Media, and Interpretations of Upper Paleolithic Figurines
PDF
No ratings yet
Science, The Media, and Interpretations of Upper Paleolithic Figurines
17 pages
Task 1. Jhin Albert Alfonso S
PDF
No ratings yet
Task 1. Jhin Albert Alfonso S
6 pages
Mid Day Meals Notice 2
PDF
No ratings yet
Mid Day Meals Notice 2
9 pages
Influence of Corneal Curvature On Calculation of Ablation Patterns Used in Photorefractive Laser Surgery
PDF
No ratings yet
Influence of Corneal Curvature On Calculation of Ablation Patterns Used in Photorefractive Laser Surgery
4 pages
Estacion Experiment 7 Report
PDF
No ratings yet
Estacion Experiment 7 Report
10 pages
Mid-Term Level 5 Answer Sheet
PDF
No ratings yet
Mid-Term Level 5 Answer Sheet
3 pages
Discourse Analysis Unit 4
PDF
No ratings yet
Discourse Analysis Unit 4
14 pages
Recount Text 2
PDF
No ratings yet
Recount Text 2
2 pages
True
PDF
No ratings yet
True
2 pages
Lembar Kerja Peserta Didik Kelas Xii Application Letter
PDF
No ratings yet
Lembar Kerja Peserta Didik Kelas Xii Application Letter
2 pages
Energy Losses in Bends and Fittings - F1-22
PDF
No ratings yet
Energy Losses in Bends and Fittings - F1-22
1 page
Mock Test 4 JR Science Teacher Test
PDF
No ratings yet
Mock Test 4 JR Science Teacher Test
4 pages
Untitled - EH-AD-2.EHTW-VAC-2
PDF
No ratings yet
Untitled - EH-AD-2.EHTW-VAC-2
1 page
JIM 101 Assignment 1 2015
PDF
No ratings yet
JIM 101 Assignment 1 2015
2 pages
Vortex Laser Beams Alexey Kovalev Alexey Porfirev Kotlyar Victor Download
PDF
No ratings yet
Vortex Laser Beams Alexey Kovalev Alexey Porfirev Kotlyar Victor Download
83 pages
Click The Link Below To Download
PDF
100% (1)
Click The Link Below To Download
58 pages