Scribd
Upload
19 views8 pages

Overcurrent Protection (50/51) : A New Family of Overcurrent Relays

The document describes a new family of digital overcurrent relays that provide replacements for existing electromagnetic and static relays. The digital relays are self-powered, microprocessor-based, and offer user-friendly features like status LEDs and test functions. They can be configured with 16 time-current curves for coordination flexibility and replace hundreds of existing GE relay models through identical curves and form/fit/function compatibility.

Uploaded by

Arman Mathur
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
19 views8 pages

Overcurrent Protection (50/51) : A New Family of Overcurrent Relays

The document describes a new family of digital overcurrent relays that provide replacements for existing electromagnetic and static relays. The digital relays are self-powered, microprocessor-based, and offer user-friendly features like status LEDs and test functions. They can be configured with 16 time-current curves for coordination flexibility and replace hundreds of existing GE relay models through identical curves and form/fit/function compatibility.

Uploaded by

Arman Mathur
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 8

Industrial Systems

Overcurrent Protection (50/51)


A New Family of Overcurrent
Relays
Digital IAC, IFC and SFC

Industrial Systems

The D family. . .

Single Phase

Self-Powered

Microprocessor Based

Exact Physical Replacement


of Equivalent E/M Relays

Industrial Systems

User Friendly Features...

Pickup Status LED


Independent IOC/TOC Trip
Target , with Reset
Trip Circuit Test
A Trip Contact and an Auxiliary
Contact are Provided for Both
TOC and IOC
50/60 Hz Selectable
Draw-out Case With current
injection test feature
3

Industrial Systems

Ease of Installation and Design


Single Relay Replaces
Hundreds of Existing Models.
Electrically and Mechanically
Compatible with IAC, IFC, or
SFC Relays.
Same Case Size, Fits Existing
Cutout.
Self Powered

Industrial Systems

Coordination Flexibility

User Selection of 16 Time-Current Curves

Inverse (IAC51*) IEC Inverse

Very Inverse (IAC53*) IEC Very Inverse


Extremely Inverse (IAC77*)
IEC Extremely Inverse
Short Time (IAC55) IEEE Inverse
Short Time (IAC75) IEEE Very Inverse
Short Time (IAC95) IEEE Extremely Inverse
Medium Time (IAC57) Definite Time (0.5-9.5sec)
Long Time (IAC66) I2T

* Identical Match to IAC curves and No Recoordination Necessary

Industrial Systems

Coordination Flexibility

Digital Single Phase IAC, IFC and SFC Cross Reference to GE


Electromechanical/Static Relays

The DIAC, DIFC and DSFC line of digital single phase, self-powered
relays offers customers a single relay that replaces the hundreds of
different models of IAC, IFC and SFC relays. These relays can replace
the following GE electromechanical & static relay types that require a
time overcurrent range of 0.5-15.9 Amps and an instantaneous
overcurrent range of 1-159 Amps:

IAC51 IAC53
IAC55 IAC57
IFC51 IFC53
IFC57 IFC66
SFC151 SFC153SFC177

IAC66
IFC77

IAC77
IFC95

IAC95

Industrial Systems

Coordination Flexibility
Versatile Independent TOC/IOC Functions
Enable/Disable TOC and IOC
Adjustable IOC Delay (0-400mS)
Low Burden Sensitive Ground Protection
Selectable Reset Characteristics
Timed Reset (Emulate Induction disk)
Instantaneous Reset

Industrial Systems

Value for your Investment


Coordination Flexibility

16 User Selectable TOC Curves


Ease of Retrofit - Same Panel Cutout

To Order All That is needed....


D_ _ CA_ _
A Revision
1 Amp Nominal Rating
5 Amp Nominal Rating
IA S1 Case
IF C1 Case
SF V1 Case

You might also like