Scribd
Upload
40 views3 pages

Facing, Step and Taper Tuning

Uploaded by

balusharma1212

1. This document contains G-code for performing facing, step, and taper tuning operations on a lathe. It specifies the tool and spindle speeds, feed rates, and coordinates for operations like facing, step tuning, and taper tuning cycles to machine parts with various diameters and tapers. 2. The second section contains G-code for a multiple turning cycle to machine a part with varying diameters, depths, and a radius cut. It specifies tool changes, spindle speeds, feed rates, and the tool path using line and arc gcode commands to cut the specified profile.

Copyright:

© All Rights Reserved
Download as DOCX, PDF, TXT or read online from Scribd
Download as docx, pdf, or txt

Facing, Step and Taper Tuning

Uploaded by

balusharma1212
40 views3 pages
1. This document contains G-code for performing facing, step, and taper tuning operations on a lathe. It specifies the tool and spindle speeds, feed rates, and coordinates for operations like facing, step tuning, and taper tuning cycles to machine parts with various diameters and tapers. 2. The second section contains G-code for a multiple turning cycle to machine a part with varying diameters, depths, and a radius cut. It specifies tool changes, spindle speeds, feed rates, and the tool path using line and arc gcode commands to cut the specified profile.

Original Description:

mech

Original Title

Facing

Copyright

© © All Rights Reserved

Available Formats

DOCX, PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

1. This document contains G-code for performing facing, step, and taper tuning operations on a lathe. It specifies the tool and spindle speeds, feed rates, and coordinates for operations like facing, step tuning, and taper tuning cycles to machine parts with various diameters and tapers. 2. The second section contains G-code for a multiple turning cycle to machine a part with varying diameters, depths, and a radius cut. It specifies tool changes, spindle speeds, feed rates, and the tool path using line and arc gcode commands to cut the specified profile.

Copyright:

© All Rights Reserved
Download as DOCX, PDF, TXT or read online from Scribd
Download as docx, pdf, or txt
40 views3 pages

Facing, Step and Taper Tuning

Uploaded by

balusharma1212
1. This document contains G-code for performing facing, step, and taper tuning operations on a lathe. It specifies the tool and spindle speeds, feed rates, and coordinates for operations like facing, step tuning, and taper tuning cycles to machine parts with various diameters and tapers. 2. The second section contains G-code for a multiple turning cycle to machine a part with varying diameters, depths, and a radius cut. It specifies tool changes, spindle speeds, feed rates, and the tool path using line and arc gcode commands to cut the specified profile.

Copyright:

© All Rights Reserved
Download as DOCX, PDF, TXT or read online from Scribd
Download as docx, pdf, or txt
You are on page 1/ 3

1.

Facing, step and taper tuning

32

70

15

15

20

32
28
24
20

15

G21

! In metric

G98

! Feed rate revolution per minute

G28 U0 W0

! Reference (Machine Datum)

M06 T0101

! Tool Change and Tool Number one

M03 S1000

! Spindle speed 1000 RPM

G00 X32 Z5

! Rapid Traverse (diameter 32 and length 5)

G94 X0 Z-1 F45

! Facing Cycle (5 mm)

Z-2
Z-3
Z-4
Z-5
G28 U0 W0
G90 X31 Z-50 F45
feed rate 45%)
X30
X29
X28

! Reference (Machine Datum)


! Tuning Cycle (diameter 28, length 50 mm and

G00 X29 Z0
G90 X27 Z-35 F45

! Rapid Traverse (diameter 27 and length 0)


! Tuning Cycle (diameter 24, length 35 mm and

feed rate 45%)


X26
X25
X24
G00 X25 Z0

! Rapid Traverse (diameter 25 and length 0)

G90 X24 Z-15 F45 R0.5 ! Tuning Cycle (diameter 24, length 15 mm and feed
rate 45%)
R-1

! R means taper turning degree

R-1.5
R-2
G28 U0 W0

! Reference (Machine datum)

M05

! Spindle stop

M30

! Program end

2. Multiple turning cycle

32

70

20

20

10
5

10 5 5 10

32
26
20

G21
G98
G28 U0 W0
M06 T0101
M03 S1000
G00 X33 Z1
G71 U0.5 R1
G71 P1 Q2 U0.2 W0 F100
N1 G01 X5
G01 Z0
G01 X10 Z-10
X10 Z-15
G03 X20 Z-20 R5
G01 X20 Z-30
X26 Z-30
X26 Z-40
X26 Z-50
N2 G01 X33
G70 P1 Q2 S1500 F100
G28 U0 W0
M05
M30

You might also like