A SEMINOR ON

BRAIN COMPUTER INTERFACE

P.CHANAKYA.
Y9MC95008,
IV Semester, II MCA,
St.Anns College of P.G. Studies,
Chirala 523 187,
Contact: [email protected]
www.funnychanu.webs.com/seminor/bci.doc

Contents
1. INTRODUCTION
2. TYPES OF BCIs

INVASIVE BCI

PARTIALLY-INVASIVE BCI

NON-INVASIVE BCI

3. ELECTROENCEPHALOGRAM BASED BCI

4. HOW BCI WORKS
The Common Structure of a B C I :

Signal Acquisition

Signal Pre-Processing

Signal Classification

Computer Interaction

5. LIMITATIONS
6. APPLICATIONS OF BCI
o

Bioengineering applications

Human subject monitoring

Neuroscience research

Man Machine Interaction

Military Applications

Gaming

Counter terrorism

7. PRESENT AND FUTURE

8. CONCLUSION
9. REFERENCES

ABSTRACT

As the power of modern computers grows alongside our

understanding of the human brain, we move ever closer to making
some pretty spectacular science fiction into reality. Imagine
transmitting signals directly to someone's brain that would allow them
to see, hear or feel specific sensory inputs. Consider the potential to
manipulate computers or machinery with nothing more than a
thought. It isn't about convenience, for severely disabled people,
development of a brain-computer interface (BCI) could be the most
important technological breakthrough in decades.
A Brain-computer interface, sometimes called a direct neural
interface or a brain-machine interface, is a direct communication
pathway between a brain and an external device. It is the ultimate in
development of human-computer interfaces or HCI. BCIs being the
recent development in HCI there are many realms to be explored.
After experimentation three types of BCIs have been developed
namely Invasive BCIs, Partially-invasive BCIs, Non-invasive BCIs.

1.INTRODUCTION

Systems capable of understanding the different facets of

human communication and interaction with computers are
among trends in Human-Computer Interfaces (HCI). An HCI
3

which is built on the guiding principle (GP): think and make

it happen without any physical effort is called a braincomputer interface (BCI). Indeed, the think part of the GP
involves the human brain, make it happen implies that an
executor is needed (here the executor is a computer) and
without any physical effort means that a direct interface
between the human brain and the computer is required. To
make the computer interpret what the brain intends to
communicate necessitates monitoring of the brain activity.
2. TYPES OF BCIs
2.1. INVASIVE BCI

Invasive BCI research has targeted repairing damaged sight and

providing new functionality to paralysed people. Invasive BCIs are
implanted directly into the grey matter of the brain during
neurosurgery. Using chips implanted against the brain that have
hundreds of pins less than the width of a human hair protruding from
them and penetrating the cerebral cortex, scientists are able to read the
firings of hundreds of neurons in the brain. The language of the neural
firings is then sent to a computer translator that uses special
algorithms to decode the neural language into computer language.
This is then sent to another computer that receives the translated
information and tells the machine what to do. As they rest in the grey

matter, invasive devices produce the highest quality signals of BCI

devices but are prone to scar-tissue build-up, causing the signal to
become weaker or even lost as the body reacts to a foreign object in
the brain.

2.2. PARTIALLY-INVASIVE BCI

Partially invasive BCI devices are implanted inside the skull but
rest outside the brain rather than within the grey matter. They produce
better resolution signals than non-invasive BCIs where the bone tissue
of the cranium deflects and deforms signals and have a lower risk of
forming scar-tissue in the brain than fully-invasive
BCIs.Electrocorticography (ECoG) measures the electrical activity of
the brain taken from beneath the skull in a similar way to non-

invasive electroencephalography, but the electrodes are embedded in a

thin plastic pad that is placed above the cortex, beneath the dura
materECoG is a very promising intermediate BCI modality because it
has higher spatial resolution, better signal-to-noise ratio, wider
frequency range, and lesser training requirements than scalp-recorded
EEG, and at the same time has lower technical difficulty, lower
clinical risk, and probably superior long-term stability than
intracortical single-neuron recording. This feature profile and recent
evidence of the high level of control with minimal training
requirements shows potential for real world application for people
with motor disabilities.
2.3. NON-INVASIVE BCI
The easiest and least invasive method is a set of electrodes,this
device known as an electroencephalograph (EEG) -- attached to the
scalp. The electrodes can read brain signals. Regardless of the
location of the electrodes, the basic mechanism is the same: The
electrodes measure minute differences in the voltage between
neurons. The signal is then amplified and filtered. In current BCI
systems, it is then interpreted by a computer program, which
displayed the signals via pens that automatically wrote out the
patterns on a continuous sheet of paper. Even though the skull blocks
a lot of the electrical signal, and it distorts what does get through it is
more accepted than the other types because of their
disadvantages.

respective

3. ELECTROENCEPHALOGRAM BASED BCI

Electroencephalography (EEG) is the recording of electrical

activity along the scalp produced by the firing of neurons within the
brain.

Among

the

possible

choices

the

scalp

recorded

electroencephalogram (EEG) appears to be an adequate alternative

because of its good time resolution and relative simplicity.
Furthermore, there is clear evidence that observable changes in EEG
result from performing given mental activities. The BCI system is

subdivided into three subsystems, namely EEG acquisition, EEG

signal processing and output generation.

General BCI architecture

The EEG acquisition subsystem is composed of an electrode

array arranged according to the 10-20 international system and a
8

digitization device. The acquired signals are often noisy and may
contain artefacts due to muscular and ocular movements.The EEG
signal processing subsystem is subdivided into a preprocessing unit,
responsible for artefact detection, and a feature extraction and
recognition unit that determines the command sent by the user to the
BCI. This command is in turn sent to the output subsystem which
generates a system answer that constitutes a feedback to the user
who can modulate his mental activities so as to produce those EEG
patterns that make the BCI accomplish his intents. Figure 5 illustrates
the basic scheduling of our BCI. The BCI period is the average time
between two consecutive answers and the EEG trial duration is the
duration of EEG that the BCI needs to analyze in order to generate an
answer. We assume that every EEG trial elicits a system answer.

BCI scheduling

We call neutral state when nothing happens (the BCI provides

a neutral answer), the active state when the BCI executes
something, the neutral EEG set as composed of those EEG trials
that elicit the neutral answer and the active EEG set the
complement of the neutral EEG set. The ideal BCI is a two-state
machine whose state changes occur at a rate defined by the BCI
period and are determined by a Boolean variable B1 (activation)
which becomes true when the BCI detects an element of the active
EEG set and false otherwise (Figure 6).

Figure 6: Ideal BCI

The ideal BCI behave properly when the recognition error rate is
near zero.
In a real application, the false positive error (the system switches to
the active state while the corresponding EEG trial belongs to the
neutral EEG set) and the false negative error (the system switches to
the neutral state while the corresponding EEG trial belongs to the

10

active set) are not zero. Depending on the application, these errors are
differently penalized.
We propose a less ideal BCI by introducing a transition state so
that the BCI cannot switch from the neutral to the active state
immediately. The BCI remains in the transition state as long as a
second Boolean variable B2 (confirmation) is false (Figure 7).

Figure 7: Less ideal BCI

B2 is true if the L (latency parameter) previous EEG trials are equally recognized as the current EEG
trial. In practice, for the sake of user comfort the value of L multiplied by the BCI period should not exceed two
seconds.
The BCI parameters are summarized in the following table:

Table 1
The optimal values for the BCI parameters are determined in the training phase. However, they should
be continuously updated in order to take into account possible variations in the EEG caused by different brains

11

background activities over time. Thus, BCI operation requires constant training and adaptation from both, the
user and the computer.

4.HOW BCI WORKS

Present BCIs use EEG activity recorded at the scalp to control

cursor movement, select letters or icons, or operate a neuroprosthesis.
The central element in each BCI is a translation algorithm that
converts electrophysiological input from the user into output that
controls external devices. BCI operation depends on effective
interaction between two adaptive controllers: the user who encodes
his or her commands in the electrophysiological input provided to the
BCI, and the computer which recognizes the command contained in
the input and expresses them in the device control.
Current BCIs have maximum information transfer rates of 5-25
bits/min.
The common structure of a Brain Computer
Interface is the following :
1) Signal Acquisition:
the EEG signals are obtained from the brain through invasive or
non-invasive methods (for example, electrodes). After, the signal
is amplified and sampled.
2) Signal Pre-Processing:
once the signals are acquired, it is necessary to clean them.

12

3) Signal Classification:
once the signals are cleaned, they will be processed and
classified to find out which kind of mental task the subject is
performing.
4) Computer Interaction:
once the signals are classified, they will be used by an
appropriate algorithm for the development of a certain
application.

Figure 8:BCI common structure

In the case of a sensory input BCI, the function happens in
reverse. A computer converts a signal, such as one from a video
camera, into the voltages necessary to trigger neurons. The signals are
sent to an implant in the proper area of the brain, and if everything
works correctly, the neurons fire and the subject receives a visual image corresponding to
what the camera sees.

Achievement of greater speed and accuracy depends on

improvements in:

13

 Signal acquisition:
Methods for increasing signal-to-noise ratio (SNR), signal-tointerference
ratio (S/I)) as well as optimally combining spatial and temporal information.
Single trial analysis:
Overcoming noise and interference in order to avoid averaging and maximize bit rate.

Co-learning:
Jointly optimizing combined man-machine system and taking advantage of feedback.

Experimental paradigms for interpretable readable signals:

Mapping the task to the brain state of the user (or vice versa).

Understanding algorithms and models within the context of the neurobiology:

Building predictive models having neurophysiologically meaningful parameters
and incorporating physically and biologically meaningful priors.

5. LIMITATIONS

The brain is incredibly complex. To say that all thoughts or

1.

actions are the result of simple electric signals in the brain is a

gross understatement. There are about 100 billion neurons in a
human brain. Each neuron is constantly sending and receiving
signals through a complex web of connections. There are
chemical processes involved as well, which EEGs can't pick up
on.
2.

The signal is weak and prone to interference. EEGs

measure tiny voltage potentials. Something as simple as the
blinking eyelids of the subject can generate much stronger
signals. Refinements in EEGs and implants will probably
overcome this problem to some extent in the future, but for now,

14

reading brain signals is like listening to a bad phone connection.

There's lots of static.
3.

The equipment is less than portable. It's far better than it

used to be -- early systems were hardwired to massive
mainframe computers. But some BCIs still require a wired
connection to the equipment, and those that are wireless require
the subject to carry a computer that can weigh around 10
pounds. Like all technology, this will surely become lighter and
more wireless in the future.

6. APPLICATIONS OF BCI
6.1. Bioengineering applications

Brain-computer interfaces have a great potential for allowing

patients with severe neurological disabilities to return to interaction
with society through communication and prosthetic devices that
control the environment as well as the ability to move within that
environment..

15

6.2. Human subject monitoring

Sleep disorders, neurological diseases, attention,
monitoring, and/or overall "mental state".
6.3. Neuroscience research
Real-time methods for correlating observable behavior
with recorded neural signals.
6.4. Man Machine Interaction
Interface devices between human and computers,
Machines.
6.5. Military Applications
The United States military has begun to explore possible
applications of BCIs beginning in 2008 to enhance troop
16

performance as well as a possible development by

adversaries.
6.6. Gaming
Computer game have gone hands-off because of
development in BCI.

People playing ping-pong using BCI

6.7. Counter terrorism

A possible application is in Counter terrorism where a
customs official can scan photos of many hundreds of
faces.

7. PRESENT AND FUTURE

17

The practical use of BCI technology depends on an

interdisciplinary cooperation between neuroscientists, engineers,
computer programmers, psychologists, andrehabilitation specialists,
in order to develop appropriate applications, to identify appropriate
users groups, and to pay careful attention to the needs and desires of
individual users. The prospects for controlling computers through
neural signals are indeed difficult to judge because the field of
research is still in its infancy. Much progress has
been made in taking advantage of the power of personal computers to
perform the operations needed to recognize patterns in biological
impulses, but the search for new and more useful signals still
continues. If the advances of the 21st century match the strides of the
past few decades, direct neural communication between humans and
computers may ultimately mature and find widespread use. Perhaps
newly purchased computers will one day arrive with biological signal
sensors and thought-recognition software built in, just as keyboard
and mouse are
commonly found on today's units.
CONCLUSION
BCI being the considered the ultimate development in the world
of HCI there is lot expections from it. Thus this field has been
developed keeping in mind the extensive use of BCI in various
18

applications mainly enabling the disabled survive independently. The

boundaries of BCI applications are being extended rapidly and many
experiments are being conducted in this concern.
REFERENCES
1.http://en.wikipedia.org/wiki/Brain-computer_interface
2.http://mmspl.epfl.ch/webdav/site/mmspl/shared/BCI/publications/baztarricadiplomaproject.pdf
3.DIRECT BRAIN-COMPUTER COMMUNICATION WITH USER REWARDING
MECHANISM
Gary N. Garcia, Touradj Ebrahimi, Jean-Marc Vesin and Abel Villca.,pdf
Brain-Computer Interface (BCI)
Christoph Guger, Gnter Edlinger, g.tec Guger Technologies OEG
Herbersteinstr. 60, 8020 Graz, Austria, pdf

19