3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

Simple3x3x3LEDCubewithArduinoAll

http://instructables-pdf.abuouday.com/download.php

1/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

2/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

3/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

4/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

5/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

6/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

ShowAllItems
This is my first instructable so leave feedback in the comments please.
When viewing lots of LED Cube tutorials it seemed like they were too complex and like
they didn't give enough detail on how to build them. Also the pick controlled ones had very
complex coding and complex wiring. Most cubes looked really bad lacking good building
instructions like the picture above. So I decided to make this one that is very simple and
good for beginners wanting to make something that looks good.

Step 1: Order the parts

http://instructables-pdf.abuouday.com/download.php

7/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

8/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

ShowAllItems

Partsneeded:

T o

3x22kohmresistorsResistors22K
3x2N3904NPNtransistorTransistorsNPN
27xLED's(pickcolourIused5mm)LEDs
9x200ohmresistors200Ohmresistors
o l s
Tinnedcopperwire(canjustremovecasingfromsinglecorewirebutitwillbe
orange)TinnedCopperWire(Iuseddifferentwirebutthelistinghasended)
PrefboardMatrixBoard
SolderSolder
Wires

OptionalParts:
MaleandfemaleheadersFemaleHeadersMaleHeaders
RibboncableRainbowRibbonCable

Tools:
SolderingIron
*(2x)Pliers(2or1andaClamp)
*Clamp
Wirecutters(pliersmighthavethis)

OptionalTools:
HotGlueGun(+Glue)
Saw(ifprefboardistoobig)
*Fluxpaste

Step 2: Making of the cube (Layers)

9/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

Thiswebsiteusescookies
Thiswebsiteusescookiestoimproveuserexperience.Byusingourwebsiteyouconsenttoallcookiesin
accordancewithourCookiePolicy.
Iagree

Readmore
Freecookieconsentbycookiescript.com

http://instructables-pdf.abuouday.com/download.php

10/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

11/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

12/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

13/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

14/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

15/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

ShowAllItems
Tape the template on a piece of cardboard and poke small holes in it with scissors at the
joins. Then push an led into each to make the holes the same size as an led (or if you have
a drill and a 5mm drill bit drill the holes).
Straighten the bridge wire by putting one end in a clamp and holding the other end in
pliers and puling will straighten the wire. If you don't have a clamp use 2 sets of pliers, put
an end in each and pull. You will need 15 pieces of straight wire for all 3 layers together
a bit longer than the length of the template.
Put an led in each hole and bend the positive legs (longer legs) at around 45 degrees from
the lines shown in the pictures.
Cut the shorter legs standing up down to the little square in the metal (in picture).
Once the legs are cut put a straight piece of the bridge wire across all of the legs in a row
that are standing and solder it on each leg, do this for the other two rows also. (Labelled
Pic1)
When the rows are done place more bridge wire across the end of them and solder it to
all 3 rows. (Labelled Pic2)
Do again twice to make 3 layers.

img159.pdf

Step 3: Making of the cube (Shape)

16/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

17/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

18/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

19/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

20/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

21/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

22/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

23/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

24/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

25/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

26/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

27/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

28/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

ShowAllItems
You will need 11 of the straightened wires. (Cut one in half to make 12)
To mark where the layers are going to go put a light under the cardboard template then
the board on top so the light shines through the holes making it easy to mark them. Once
marked slide a piece of wire down each hole on the board keeping it standing straight and
solder it on the copper side.
Slide the first layer down the wires and solder the remaining LED legs not connected to
anything else on to the wires that are pointing up and trim the excess off of the LED
legs.
Do the same to the next layer but to get the correct height turn a 9-Volt battery on its side
and use it as a spacer.
For the last layer do the same again except put another battery on top as another spacer.
When done trim all the long legs and the long wires going to the top.
Test the cube and make sure all the LED's light up if not they might need to be rehttp://instructables-pdf.abuouday.com/download.php

29/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

soldered. (Connect ground to each layer and power to each rail)

Step 4: The circuit (1)

http://instructables-pdf.abuouday.com/download.php

30/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

31/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

32/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

33/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

34/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

35/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

ShowAllItems
Put the transistors in at the layer connections and solder them there connecting the
collector (C) to the layers.
Put a 22k resistor in connected to the base (B) with the other leg going down the board
like a wire.
Connect the emitters (E) together as they are going to ground.

Step 5: The Circuit (2)

http://instructables-pdf.abuouday.com/download.php

36/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

37/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

38/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

39/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

40/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

41/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

42/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

43/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

44/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

45/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

46/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

47/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

48/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

49/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

50/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

51/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

52/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

53/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

54/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

55/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

56/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

57/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

58/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

http://instructables-pdf.abuouday.com/download.php

59/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

ShowAllItems
Bring all the legs of the rails down to one point and solder a resistor to them. I have used
wire to "Jump over" the ground "rail" making it neater I have also used hot glue as an
insulator. The picture labelled wiring shows this and the picture labelled resistors also
shows this.
When all the wires are at a point solder wires (header pins or sockets) onto the board to
be able to connect them to the Arduino. I have used header pins and made cables to
connect the cube to an Arduino. To make it so much easier to connect pins or sockets to a
cable apply some flux paste to the pins or sockets.
The wires are connected to the Arduino as shown in the last picture.

Step 6: Connecting to the Arduino

60/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

ShowAllItems
Ground wire goes to a ground pin.
Layer 1 goes to pin 11
Layer 2 goes to pin 12
Layer 3 goes to pin 13
Rail 1 goes to pin 10
Rail 2 goes to pin 9
Rail 3 goes to pin 8
Rail 4 goes to pin 7
Rail 5 goes to pin 6
Rail 6 goes to pin 5
http://instructables-pdf.abuouday.com/download.php

61/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

Rail 7 goes to pin 4

Step 7: The code

http://instructables-pdf.abuouday.com/download.php

62/63

3/20/2016

Download Simple 3x3x3 LED Cube with Arduino - All as pdf

ShowAllItems
The code will be uploaded soon but to get started use the led cube library available I do
not own and did not create the led library, it has a licence file included in the zip file.
LED Library
https://github.com/gziprduino-ledcube

LedCubeExample

Downloaded using:
instructables-pdf.abuouday.com Privacy Policy
http://instructables-pdf.abuouday.com/download.php

63/63