CAMTECH MANUFACTURING FZCOCAMTECH MANUFACTURING FZCO (AMTECH MANUFACTURING FZCO is the first and only API accredited valve manufacturing company among UAE, Middle East and GCC, engaged in this business since 1999 for manufacturing mainly Ball Valves, Gate, Globe, Check valves, Butterfly valves, Plug valves, Pig valves & Choke valves in metallurgy such as carbon steel, Stainless steel, Duplex and Super duplex steel, for size range from 14" to 56” and class rating from 150 to 2500. Our state ofthe at manufacturing facility based in Jebel Ali Free Zone (UAE) is spread over an area of 10,000 sq.mtr with plant annual capacity of ever 40000 components, is fully equipped with modem six axis flexible machining center supported by standalone CNC and associated sub- systems fully equipped to manufacture and supply complete range of valves for Pipelines, Oil and Gas sector, petrochemical, Refineries, Pharmaceutical, Power, Construction, Water Industries and other process industries. Camtech Manufacturing FZCO is API (6D, 6A, 600 and Q1) accredited and an ISO 90012008-, ISO TS -29001, GOSTR, 180 14001 & OHSAS 18001 certified company with CE marking and ATEX certification for all products. All our valves are designed, engineered and manufactured in strit conformance to API, ASME, ASTM, ANSI, BS, DIN and other recognized international standards where ever applicable. Our continuous and stringent quality consisteney is achieved through rigorous quality control processes and latest testing equipments for Fugitive emission test, Fre safe test, Positive Material Identification, Cryogenic test, Hydro test, Pneumatic tes, High pressure gas test ‘Over the recent years there is a dramatic increase in facilities handling 1128 bearing hydrocarbons. Hence parameters like Hydrogen sulfide concentration, Total system pressure, application temperature, existence of elemental sulfur and chloride content have a bearing on appropriate material selection in this severe environment, Hence all CAMTECH, valves are manufactured in strict compliance with NACE, MRO175/1SO 15156 to meet customer requirement. Our central geographical location along with the long term, association with major forge masters and foundries locally as well as overseas and with qualified and experienced staff, ‘we are proud {0 say that our commitment are always, achieved on time and every time. Quality Commitments cas VCECAMTECH MANUFACTURING FZCO Camtech API 6A. valves provide highest level of quality and value to oil and gas application. These valves have optimized flow path and proper selection of trim style and material for longer life, proper performance and funetion. Camtech valves can be used in drilling and production applications with the security and reliability of metal to metal scaling in a wide range of working pressure. All these valves are available in all popular bore sizes and pressure rating from 2000 ‘psi to 10,000 psi. these valves are offered in all API temperature classes and product specification levels PSL 1 through 4, Design & Manufacturing Std API.6A, ASME VIII, API 6FA, Face to Fave Std API 6D, ASME BI6.10, Size Range 21/16" to 41/16" Pressure Class ‘API 2000, 3000, S000, 7000 Product specification level PSL 1,2,3,3G,4 Flanged, Butt-weld , Socket End connection weld, Hub Connector. 100-500 50,100 150200 250300 350 38 180 0 180 20 180 ROOM TEMPERATURE e 150) w 180 a 250 w 350) AMaterial | Body & Bonnet ‘Stem Maer (Gate Matera, Seat Material Cassiiation ‘Materia Coming Coating Coating Coke Tun Been ‘AA General Service AUsta1xx nitride | Atsi41xxainided | atstsinxnitida | Stiles Stel & Tungsten carbide AISTAIOSS civome Sunless Stel & BB General Sevies | Lowalloysteel | AISI 410 SS niidea res elites ss Steal AISTAIOSS chrome ‘Sainies Stel & CC General sevice | alsiaioss | Alsi 410 8 nivided Nos elites ss Steal . 5 ‘AIST#DR nickel | AIST ATX band ‘Sainies Steel & DD SourService* | Low Alloy Stel ‘iat fess Sele’ ‘ules Sel 5 . wn AISTAIOSS hard Sli ‘Sunless Stel & EE-SourSenice* | Low AlloySteel | AISL410 8S niided “toss Selites fee ee Senive™ saioss siaio ss aim AISTAIO SS hard val ‘Sunless Stel & [FF Sour Service aistsi0ss | alst1o SS nitrides Moss Selites fale Sel Taw alloy seal sad Tonos resistant HI SourSemvce * | withalioy 625 0r Alloy 718 Alloy T8 hard faced Stllited alloy & Tungsten solid alloy 718 cabide * As defined by NACE Standard MR-O1-75 Note ~ Special trims are available on requestCAMTECH MANUFACTURING FZCO API 6A GATE VALVE. DESIGN FEATURES: "The body and trim materials are available to fit operating conditions, Refer to the trim chart Full open through conduit construction to eliminate turbulence and pressure drop, ‘The gate and seat assembly is easily and quickly replaceable without special tools. ‘The gate construction helps prevent line sediment from entering the body cavity and also prevents pressure locks when the upstream pressure is reduced to ero Bi-dirctional sealing = Non-Rising stem. Gate is guided smoothly with guides. ‘The shoulder on the stem can be seated against the bonnet flange to seal off the stuffing box. permitting the replacement of the stem packing while the valve is under pressure. ‘The stem pin protects the stem and other internal parts from failure by shearing if a high overload torque is accidentally applied to the handwheel, "The two thrust bearings of high capacity absorbs the opening or closing loads of the gate reducing the turning effort © a minimum, The grease injection port permits lubrication of the gate and seat assembly and is used to vent trapped body pressure after stem back seating. The threaded packing retainer allows the replacement of the bearing or the stem pin while the valve is under pressure by holding the stem packing inside the stuffing box. = Expanding gate also available on request.CAMTECH MANUFACTURING FZCO "1 6A GATE VALVE eee) SIZE BORE A B c D N WEIGHT (Kg) 21/16 52.4 295 135 515 250 13.0 50 29/16 65.0 333 165 530 250 15.5 65 3-1/8 80.0 359 195 585 350 20.0 EY 41/16 103.2 435 235 665 350 245 170 SIZE BORE A B c D N WEIGHT (Kg) 21/16 52.4 371 135 515 350 13.0 80, 29/16 65.0 422 165 530 350 15.5 105, 3-1/8 80.0 435 195 585 350 20.0 120 41/16 103.2 511 235 665 450 245 215 ‘SIZE BORE A B c 5 N WEIGHT (Kg) 21/16 52.4 371 135, 515 350 13.0 80 2-9/16 65.0 422 165, 530 350 15.5 105, 3-1/8 80.0 473 205 585 350 20.0 140 4-1/16 103.2 549 255, 680 450 245 260 EEE 21/16 52.4 521 350 480 400 12.0 220 29/16 65.0 565 425 530 400 15.0 260 3-1/8 78.0 619 530 710 450 18.0 380 41/16 103.2 670 660 920 450 23.0 490 SIZE BORE A B c oD N WEIGHT (Kg) 21/16 52.4 235 135 515 250 13.0 40, 29/16 65.0 261 165 530 250 15.5 55. 3-1/8 80.0 290 195 585 350 20.0 70 4-1/16 103.2 330 235 665 350 24.5 130 ‘SIZE BORE A B c D N WEIGHT (Kg) 2-1/16 52.4 245 135 515 350 13.0 50 2-9/16 65.0 261 165 530 350 15.5 70, 3-1/8 80.0 290 195, 585 350 20.0 100 ‘All dimensions are in mm. #10,000 psi valve shall be with rising stem design with lower balancing stem. aExpanding style Gate also available on request. aN ~ Number of tums fo open the valve,CAMTECH MANUFACTURING FZCO API 6A CHOKE VALVE, Camtech manufacture both Positive and adjustable choke valves in pressure rating up to 10,000 PSI working pressure. Each choke can be interchanged and configured in to positive choke, adjustable choke, and actuated choke. Depending upon the requirement in the site, well conditions, Tife, and these chokes can be converted in to different types ‘as ‘required. The majority of the components are interchangeable, which makes it easy for manufacturing and ntenance, POSITIVE BEAN BODY CONFIGURATION \WITH INLET AND OUTLET OPTIONS FLANGED. + THREADED © BUTT-WELD + HUB NEEDLEANDSEAT CAGE TYPE Interchangeable POSITIVE CHOKE ADJUSTABLE CHOKE ‘These chokes are available below, different configurations as "= Positive Bean configuration 1 Needle and Seat configuration = Cage type configuration Positive Bean configuration Its the most inexpensive and simplest among all chokes. It is simpler in maintenance at site with interchangeable features,. It is rigid, heavy duty and maintenance free construction, ‘Needle and Seat configuration ‘These are meant for variable flow. It has extemally ‘controlled indicator showing orifice size in the increment of 116th inch, These are suitable for low to medium pressure drops, less. severe service and applications that do not requite positive shutof, Cage type configuration, ‘These are meant for highest seal integrity with positive shutofT. These are most suited for service that include large pressure drop, cavitations and abrasive service. ‘Cage type construction is again sub classified in to two types depending upon the severity and life of the choke. Extemal / Closed cage configuration, Designed for severe service, High pressure, multi-phase flow and erosive serve, Internal cage configuration, Designed for medium service, medium pressure, and High flow capacity and mild erosive Mids, ‘This high performance Cage trim design offers advantages to noise reduction, reduced cavitations in liquid service, reduced icing in gas service, extended service in abrasive ‘environments, and positive shut-off,CAMTECH MANUFACTURING FZCO API 6A CHOKE VALVE se 5.000" co 2S 20) [a 5.000 650 260 ze | 10,000 40 300 2s} [a | 5.000" 320 290 250 zie | S000 Hs | 0 | 20; | ms] [aone | S000 7s | a5 30 | mas] zane [10000 [37s | 380 [240 | 20 | aa" | sooo 765_| 465] 300225] SIZE wr A P 8 © = 4” orifices are available on request. 3/6" 10,000 880 610 295 255, m Bonnet seal available with two options, O-ring seal & metal seal. = 3,000 a5 395, 290) 250] ANSI class 600 ~ 2500 also available. sie" [S000 s75_{ 395 [290 [250 | cartech reserves the right fo change the content ofthis 41167 [10.000 | ~s80 | s10[_295 | 255] information widow noonHead Office & Manufactu CAMTECH MANUFACTURING FZCO- P.0.Box:: 17788, Jebel Ali Free Zone Dubai - United Arab Emirates Tel : +971 4 8813133 Fax: +971 4 8815051 / 8819166 Email : [email protected] Website: www.camtechvalve.com / www.camtech-group.org, CAM-6A-00 (2014)