Scribd
Upload
255 views1 page

Ce3112 A1

Determine the design axial load capacity of a square column reinforced with 6 bars on each side. Design a uniaxially loaded rectangular column to support an axial load of 1500 KN and moment of 250 KNm. Design a biaxially loaded rectangular column to support an axial load of 1500 KN and moments of 200 KNm and 100 KNm in two directions. All columns use C-25 concrete and S-400 steel rebar.

Uploaded by

nvnrev
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
255 views1 page

Ce3112 A1

Determine the design axial load capacity of a square column reinforced with 6 bars on each side. Design a uniaxially loaded rectangular column to support an axial load of 1500 KN and moment of 250 KNm. Design a biaxially loaded rectangular column to support an axial load of 1500 KN and moments of 200 KNm and 100 KNm in two directions. All columns use C-25 concrete and S-400 steel rebar.

Uploaded by

nvnrev
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

ASSIGNMENT-1

DEPARTMENT OF CIVIL ENGINEERING


(CE 3112 REINFORCED CONCRETE STRUCTURES-II)
YEAR: III/SEMESTER: II
1. Determine the design axial load capacity Pd of a square column of size 400mm, reinforced
with 6 25, evenly distributed all along each side and edx = 80mm, edy = 120mm. Consider
concrete C-25, steel S-400 and class I work.
2. Design a uniaxially eccentrically loaded braced rectangular column for the following data.
Deisgn axial load, Pda = 1500 KN
Design unixial moment, Mdx = 250 KNm
Unsupported length, L = 3.5m
Effective lengths Lex = 3.0m and Ley = 2.75m.
Grade of concrete: C-25 and grade of steel: S-400.
3. Design a biaxially eccentrically loaded braced rectangular column for the following data.
Design axial load, Pda = 1500 KN
Design biaxial moments, Mdx = 200 KNm and Mdy = 100 KNm
Unsupported length, L = 3.5m
Efective length Lex = 3.0m and Ley = 2.75m
Grade of concrete: C-25 and grade of steel: S-400.

You might also like