Scribd
Upload
293 views1 page

ResGeo202MOOC HW3

This document provides instructions for homework assignment 3 in the ResGeo 202 Reservoir Geomechanics course. Students are asked to estimate the unconfined compressive strength (UCS) of rock at different depths by using empirical relationships between UCS and measurements from geophysical well logs, including density, compressional velocity, and shear velocity logs. Students are to download well log data, calculate UCS from the different logs for three lithological units using the given equations, plot UCS versus depth with depth inverted on the y-axis, and answer questions based on their analysis.

Uploaded by

Muhammad Hanif
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
293 views1 page

ResGeo202MOOC HW3

This document provides instructions for homework assignment 3 in the ResGeo 202 Reservoir Geomechanics course. Students are asked to estimate the unconfined compressive strength (UCS) of rock at different depths by using empirical relationships between UCS and measurements from geophysical well logs, including density, compressional velocity, and shear velocity logs. Students are to download well log data, calculate UCS from the different logs for three lithological units using the given equations, plot UCS versus depth with depth inverted on the y-axis, and answer questions based on their analysis.

Uploaded by

Muhammad Hanif
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ResGeo 202 Reservoir Geomechanics

Spring 2015, OpenEdX


Homework 3 Estimating Rock Strength from Geophysical Logs
Due April 28, 2015 (7:30 UTC)
Please direct any questions to the forum on the OpenEdX Courseware page

Background
In this assignment, you will be estimating the unconfined compressive strength (UCS) of rock as
a function of depth using geophysical logs from a well in the Barnett Shale. The log data, as well
as information about the formation depths in the well, can be downloaded by clicking the right
tab on the top of the page. Utilize a scientific computing program such as MATLAB or Microsoft
Excel to follow the steps below. Then, answer the questions on the page below.

Instructions
Part 1: Estimating rock strength from geophysical logs
a. Examine the log data. The Excel file containing the log data has density in g/cc
and compressional and shear velocities expressed as travel times in units of s/ft
for a section of the Barnett Shale well. In addition, the formation top depths of
three lithological units are given.
b. Estimate UCS for the given depths using known empirical relations. Use the
empirical relationships given in Lecture 5, slides 33-36 to estimate UCS from the
given sonic and density logs. The appropriate equations to apply for each of the 3
lithological units are given in the data spreadsheet. For each formation, you will
use one method of estimating UCS from sonic logs and one method from density
logs. Make sure to pay attention to the units for these calculations and be careful
of imaginary components when exponentials are involved.
c. Plot UCS vs. depth. It is conventional to put depth on an inverted y-axis and UCS
on the x-axis. Compare your methods of estimating UCS for the different
lithological units to answer the questions below.
Part 2: Answer the questions on the page below
Use the plots and calculations from Part 1 to answer the questions on the page below. The
answers will be posted after the due date. Numerical entry type responses have only a
range of acceptable values and are graded electronically, so please adhere to the value of
constants given here to prevent misgrading of your submissions.

You might also like