Scribd
Upload
52 views1 page

Windows Re-Installation Procedure

The document outlines 17 steps to reinstall Windows, beginning with inserting the Windows CD/DVD and restarting the system. It describes selecting the boot menu option, navigating installation screens, formatting the drive using NTFS, and allowing the system to copy files and restart multiple times. Finally, it notes installing motherboard drivers from the motherboard CD to complete the Windows reinstallation process.

Uploaded by

Parmesh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
52 views1 page

Windows Re-Installation Procedure

The document outlines 17 steps to reinstall Windows, beginning with inserting the Windows CD/DVD and restarting the system. It describes selecting the boot menu option, navigating installation screens, formatting the drive using NTFS, and allowing the system to copy files and restart multiple times. Finally, it notes installing motherboard drivers from the motherboard CD to complete the Windows reinstallation process.

Uploaded by

Parmesh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

STEPS TO BE FOLLOWED FOR REINSTALLING WINDOWS:

1) Firstly insert the windows CD/DVD into the CD/DVD ROM.


2) Then restart the system such that the CD/DVD must be inside the ROM itself.
3) When monitor starts, search for BOOT MENU option in the first black screen and press BOOT MENU key .
(i.e, If BOOT MENU is for F12 key, press F12 key and F12 key should be pressed before you see the next screen).
4) Then after pressing F12 key a dialogue box appears. By using arrow keys select for CD/DVD option and press
enter.
5) Then next black screen appears, and after 2 to 3 seconds at the bottom of the screen when it shows PRESS ANY
KEY TO CONTINUE, press any of the keyboard key to continue further.
6) After pressing any of the key, blue screen appears. Wait for sometime and do not press any key.
7) After 4 to 5 minutes, it changes to next screen.
8) In that screen select windows destination folder.
9) After this, in the next screen select FORMAT THE DRIVE USING NTFS FILE SYSTEM option and press
enter.
10) Then format the drive by pressing F button.
11) In the next screen you will see that setup is formatting.
12) After this you will see that setup is copying files.
13) After this, system restarts.
14) Even after this dont press any of the key until it asks to configure settings from the user.
Note: This step takes a long time. Approximately half an hour or more than that.
15) After this system restarts agin.
16) Then it asks the user to carry out some settings.
17) When installation is completed, remove the windows CD/DvD from the ROM and now insert mother board CD
and install the required drivers from the mother board CD.
Thus completes the installation.

You might also like