Scribd
Upload
34 views

Computer Network

This document provides instructions for connecting devices in several ways: 1) Making and using crossover and straight-through Ethernet cables to directly connect two PCs and configure their IP addresses. 2) Connecting two laptops wirelessly by using one's mobile hotspot and then configuring the laptops' IP addresses. 3) Sharing an internet connection from a PC or laptop to a mobile device either via USB tethering, or by using virtual router software on the laptop. 4) Connecting two PCs via an Ethernet switch and then configuring their IP addresses, which is done in the same way as connecting them directly with a crossover cable.

Uploaded by

MuhammadMahmoud
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
34 views

Computer Network

This document provides instructions for connecting devices in several ways: 1) Making and using crossover and straight-through Ethernet cables to directly connect two PCs and configure their IP addresses. 2) Connecting two laptops wirelessly by using one's mobile hotspot and then configuring the laptops' IP addresses. 3) Sharing an internet connection from a PC or laptop to a mobile device either via USB tethering, or by using virtual router software on the laptop. 4) Connecting two PCs via an Ethernet switch and then configuring their IP addresses, which is done in the same way as connecting them directly with a crossover cable.

Uploaded by

MuhammadMahmoud
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

1) How to make cross over & straight cable

2) How to connect 2 pcs via cross cable


3) How to connect 2 pcs wireless
4) How to connect 2 pcs via switch
5) Sharing internet from pc/lab top to mobile

Section 1: 1) Making crossover cable & Straight through


First side in any cable arrange as standard B as follows
Put the wires in the following order, from left to right:

white orange

orange

white green

blue

white blue

green

white brown

brown

in Straight through: both sides are the same (in the same order of wires)

In cross over

Section 2: Connecting two PCs using a crossover Ethernet cable


1) connect 2 pcs via cross over cable
2) put ip in 2 pcs

control panelnetwork and internetnetwork and sharing center--click on Change adapter


settings-- Right-click on your local adapter and select Properties. -- In the Local Area
Connection Properties window highlight Internet Protocol Version 4 (TCP/IPv4) then click
the Properties button-- Now select the radio button Use the following IP address and enter in
the correct IP (192.168.1.1) and second pc (192.168.1.2)
3) turn on network discovery & file sharing & turn off password. (How???)

use ping to test that 2 pcs connected


on pc1
open cmd and write ping (ip of second pc)
if reply then it works well.
4) Under Network you will find 2 pcs and then you can share folders. (How to share ??).

Section 3: -

Connecting 2 lab tops wireless:


1) Open hotspot from your mobile
2) Connect your 2 lab tops to our mobile
3) Repeat same steps of connecting 2 pcs through cross over cable.

To share internet from pc to mobile:


1) Connect your mob to pc via usb then check on usb debugging.
2) Install usb reverse tethering tool on your mobile and you can share
internet.

To share internet from Lab top to mobile:


There are very tools to do that but one of them is virtual router
1) Install it on your Lab top
2) Follow steps as below

3) Turn Wi-Fi on your mobile & enter network name & password
4) Connected and you have shared internet.

How to connect 2 pcs via switch


Same steps will repeat when connected 2 pcs via cross over cable

You might also like