Scribd
Upload
18 views1 page

Department of Electrical Engineering: Advanced Control System Lab M.TECH LAB (MCE-251) List of Experiments

This document lists 10 experiments for an Advanced Control System lab in the Department of Electrical Engineering. The experiments focus on using digital control systems like VDCS-01 and MICRO-51FB to study proportional, integral, and derivative control actions on simulated second order processes. Other experiments involve running a stepper motor at different speeds, drawing speed-torque characteristics of an AC servomotor, using a PLC to control AC motor speed and a conveyor system, and performing open and closed loop speed control of BLDC motors using additional hardware.

Uploaded by

AshutoshBhatt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
18 views1 page

Department of Electrical Engineering: Advanced Control System Lab M.TECH LAB (MCE-251) List of Experiments

This document lists 10 experiments for an Advanced Control System lab in the Department of Electrical Engineering. The experiments focus on using digital control systems like VDCS-01 and MICRO-51FB to study proportional, integral, and derivative control actions on simulated second order processes. Other experiments involve running a stepper motor at different speeds, drawing speed-torque characteristics of an AC servomotor, using a PLC to control AC motor speed and a conveyor system, and performing open and closed loop speed control of BLDC motors using additional hardware.

Uploaded by

AshutoshBhatt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

DEPARTMENT OF ELECTRICAL ENGINEERING

ADVANCED CONTROL SYSTEM LAB


M.TECH LAB (MCE-251)
LIST OF EXPERIMENTS
1. To study the characteristics of digital Proportional control action on the
simulated second order process using VDCS-01& MICRO-51FB kit.
2. To study the characteristics of digital Proportional + Integral control
action on the simulated second order process using VDCS-01&
MICRO-51FB kit.
3. To study the characteristics of digital Proportional + Integral +
Derivative control action on the simulated second order process using
VDCS-01& MICRO-51FB kit
4. To run a stepper motor (using stepper motor control trainer & MICRO51FB kit)
I.
At different speed in two direction
II. In both forward and reverse direction with delay
5. To draw speed-torque characteristics of an AC servomotor
6. To carry out the speed control of AC motor using PLC.
7. To examine the operation of conveyor control system using PLC.
8. To carry out the closed loop speed control of BLDC motor using FPGA
kit.
9. To carry out the open loop and closed loop speed control of BLDC
motor using micro-4011 and IPM.
10.
As suggested by faculty/lab in-charge.

You might also like