Scribd
Upload
96 views5 pages

Type of Gate Symbol Explanation

Transistors can be used to build logic gates. A small base current in a transistor can switch on a greater collector current. AND gates require high inputs on both inputs to output high. OR gates output high if either input is high. NAND gates behave like an AND gate followed by a NOT gate, and NOR gates behave like an OR gate followed by a NOT gate. Truth tables show the output of logic gates for all combinations of high and low inputs.

Uploaded by

Dr Milan Glendza Petrovic Njegos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
96 views5 pages

Type of Gate Symbol Explanation

Transistors can be used to build logic gates. A small base current in a transistor can switch on a greater collector current. AND gates require high inputs on both inputs to output high. OR gates output high if either input is high. NAND gates behave like an AND gate followed by a NOT gate, and NOR gates behave like an OR gate followed by a NOT gate. Truth tables show the output of logic gates for all combinations of high and low inputs.

Uploaded by

Dr Milan Glendza Petrovic Njegos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Its Logical Revision Pack (P6)

Transistors:
In a transistor, a small base current can switch on a GREATER
current through the collector.
To work out the current coming out of the emitter:
Ie = Ib + Ic

Logic Gates:
Type of Gate
AND

OR

NOT

Symbol

Explanation
To give a high output,
both A and B must have a
high output or be on. AND
gates are like two switches
in series; the circuit cant
work if one switch is off.
To give a high output, one
of A or B must have a high
output or be on. OR gates
are like two switches in
parallel; only one switch
needs to be on for the
circuit to work.
To give a high output, the
input must be low or
completely off. NOT gates
will give the opposite of
the (single) input the
output is not what the
input is.

Making an AND gate:


Two transistors can be combined to make an AND gate.
1) A small input at A will switch on the upper
transistor.
2) A small input at B will switch on the lower transistor.
3) A current at A and at B are needed to switch on
the 6V supply.
The other logic gates can be made by using different
combinations of transistors.
Transistor circuits ALWAYS have a high value resistor in the
base circuit to limit the current.

Its Logical Revision Pack (P6)


NAND and NOR gates:
Type of Gate
NAND

Symbol

NOR

Explanation
It behaves like an AND
gate followed by a NOT
gate.
It behaves like an OR gate
followed by a NOT gate.

Truth Tables:
Truth tables show how logic gates behave.
-

When there is some input (or output), a 1 is entered in the table


When there is NO input (or output), a 0 is entered in the table

AND Gate:
Input A
0
1
0
1

Input B
0
0
1
1

OR Gate:
Output
0
0
0
1

NAND Gate:
Input A
0
1
0
1

Input B
0
0
1
1

NOT Gate:
Input A
0
1

Output
1
0

Input A
0
1
0
1

Input B
0
0
1
1

Output
0
1
1
1

Input B
0
0
1
1

Output
1
0
0
0

NOR Gate:
Output
1
1
1
0

Input A
0
1
0
1

Its Logical Revision Pack (P6)


Past Papers:
PPQ(1):

PPQ(2):

Its Logical Revision Pack (P6)


PPQ(3):

PPQ(4):

Its Logical Revision Pack (P6)


Mark Schemes:
PPQ(1):

PPQ(2):

PPQ(3):

PPQ(4):

You might also like