Scribd
Upload
35 views1 page

Dghshgjklaahjkhjkajhkjakhjah LJH HJ J HJ Hahfyjhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhg SKFFFFFFFFFFFF KSKSKSKKKKKKKK

The document provides instructions for adding fluid to a vehicle engine until it drips out of the level tube. It specifies checking and renewing the seal on the level plug if needed before refitting and tightening to the specified torque. The filler tube plug and cap should then be refitted along with any engine undershields before lowering the vehicle. Frequent need for topping-up could indicate a leak that should be found and corrected.

Uploaded by

Arizona Ronn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
35 views1 page

Dghshgjklaahjkhjkajhkjakhjah LJH HJ J HJ Hahfyjhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhg SKFFFFFFFFFFFF KSKSKSKKKKKKKK

The document provides instructions for adding fluid to a vehicle engine until it drips out of the level tube. It specifies checking and renewing the seal on the level plug if needed before refitting and tightening to the specified torque. The filler tube plug and cap should then be refitted along with any engine undershields before lowering the vehicle. Frequent need for topping-up could indicate a leak that should be found and corrected.

Uploaded by

Arizona Ronn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 1

dghshgjklaahjkhjkajhkjakhjah;ljh;hj;j;hj

hahfyjhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhg
skffffffffffff
kskskskkkkkkkk
13 With the cap removed, pull out the filler tube plug then add the specified fluid until it drips out of the level
tube. Check the condition of the seal on the level plug and renew it if necessary by cutting off the old seal and
fitting a new one. Refit the plug and tighten to the specified torque.
14
Refit the filler tube plug and the new cap or cap securing clip.
15
Switch off the ignition then refit the engine undershield(s), tighten the retaining screws securely, and
lower the vehicle to the ground.
16
Frequent need for topping-up indicates that there is a leak, which should be found and corrected before
it becomes serious.

Hose and fluid leak check

You might also like