Scribd
Upload
186 views

A0404 - Finite Element Analysis

This document contains 8 questions related to finite element analysis for an exam. The questions cover topics like: 1) Deriving the general stiffness matrix and displacement/stress calculations for simple structures 2) Estimating displacement, strains, stresses and reactions for truss and plate structures 3) Deriving strain-displacement relations for triangular elements 4) Calculating equivalent point loads and temperature distributions 5) Computing deflections and slopes for beams 6) Finding natural frequencies for stepped structures 7) Short notes on general FEA procedures, Galerkin method, finite elements, and non-linear dynamic analysis. Students are required to answer any 5 of the 8 questions.

Uploaded by

hari0118
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
186 views

A0404 - Finite Element Analysis

This document contains 8 questions related to finite element analysis for an exam. The questions cover topics like: 1) Deriving the general stiffness matrix and displacement/stress calculations for simple structures 2) Estimating displacement, strains, stresses and reactions for truss and plate structures 3) Deriving strain-displacement relations for triangular elements 4) Calculating equivalent point loads and temperature distributions 5) Computing deflections and slopes for beams 6) Finding natural frequencies for stepped structures 7) Short notes on general FEA procedures, Galerkin method, finite elements, and non-linear dynamic analysis. Students are required to answer any 5 of the 8 questions.

Uploaded by

hari0118
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

NR

Code No. A0404


JAWAHARLAL NEHRU TECHNOLOGY UNIVERSITY, HYDERABAD
M.Tech. I Semester Regular Examinations, March – 2009
FINITE ELEMENT ANALYSIS
(Common to CAD/CAM and Design for Manufacturing)

Time: 3 hours Max. Marks.60


Answer any Five questions
All questions carry equal marks
---

1.a) Explain the applications of finite element analysis with suitable examples.
b) Derive the general stiffness matrix in terms of stress- strain relation matrix and
strain displacement relation matrix from the virtual energy principle?

2. Calculate displacement vector and stresses for the following figure 1? Take E= 2E
5 N/mm2

Figure 1
3. Estimate the displacement vector, strains, stresses and reactions in the truss
structure shown in the figure 2.

Figure 2

Contd…2
Code No. A0404 -2-

4.a) Derive strain displacement relation matrix for triangular element?


b) Calculate the equivalent point loads at the nodes as shown in the figure 3. The
load is varying from 100 Mpa to 300 Mpa from the node (30,70) to the node (10,
50) via node (20, 60). Take the thickness of the plate as 10 mm.

Figure 3
5. Estimate the temperature distribution for the composite slab shown in the figure 4.
The other face of the wall subjected to heat flux of 400 W/m2.
K1=25 W/m K; K2=35 W/m K; K3=25 W/m K

Figure 4
6. Calculate the deflection at the center and slopes at the ends of a simply supported
beam of 2 m length subjected to a UDL of 50 kN/m throughout the length. Take
EI=700 N-mm2.

7. Calculate the natural frequencies for the stepped bat shown in figure 5.
Take E = 2 E 5 N/mm2; density=1000 kg/m3

Figure 5.
8. Write short notes on:
a) General procedure of FEA b) Galerkin method
c) Fin element d) Non linear dynamic analysis.

^*^*^

You might also like