Allweiler Screw Pumps

ALLWEILER
Screw Pumps
Series SN
Application
For handling lubricating fluids. The fluids to be pumped must
not contain any abrasive substances nor chemically attack the
pump materials.
Main fields of application
Fuel oil firing/energy engineering:
For handling light and heavy fuel oils as well as residual and
waste oils, e.g. as fuel oil, transfer, fuelling, ring-conduit and
burner-operation pumps.
Hydraulics:
For booster and/or pumping hydraulic oils on mineral-oil basis
or hydraulic lubricating liquids; e.g. as hydraulic pumps for lifts,
elevating platforms, pusher centrifuges, hydraulic presses,
forging hammers, bale presses, chip-board presses, winches,
hoists, variable-pitch propeller and rudder adjusting units,
hatch hydraulics, rolling mill and machine tool hydraulics.
General industrial engineering/machine/heavy machine industry:
For handling lubricating, cooling, coolant, sealing, regulating
and hydraulic oils, light and heavy fuel oils, Diesel oils, fuels and
thermal oils (cold), e.g. for steam, gas and water turbines as
lubricating, sealing, regulating oil and jacking oil pumps, for
compressors as lubricating, sealing and coolant oil pumps, for
gear drives as lube-oil pumps, for Diesel engines as lubricating
and cooling oil as well as fuel pumps, for rolling milis as lube-oil
and hydraulic pumps etc.
Marine/Offshore engineering:
For handling lubricating, cooling and hydraulic oils, light and
heavy fuel oils, crude oils as well as fuels.
Machine-tool industry:
For handling cutting, grinding, deep-hole drilling oils and oilin-water emulsions as well as hydraulic oils.
Tank farms:
For handling all lubricating fluids such as greases, oils, paints,
fuels, polyols, isocyanates; e.g. as loading or unloading pumps.
Printing industry:
For handling gravure inks.
Chemical and petro-chemical as well as processing industry:
For handling all lubricating fluids such as oils (including crude
oils), greases, paint, lacquers, ointments, pastes, polyols, isocyanates, tar, bitumen, glycerin, glues, adhesive substances,
resins, paraffins, waxes, water glass and also as pipeline
pumps.
Paint/lacquer industry:
For handling paints, lacquers, resins, oil varnish and linseed oils.
Washing/cleansing agent industry:
For handling oils, greases, soaps and additives.
Paper/pulp industry:
For handling viscose and pulp.
Food industry:
For handling molasses, glucose, sirup and vegetable oils.
Design
Self-priming three-screw pump.
The hardened and ground spindles run in a replaceable casing
insert.
The axial thrust acting on the flanks of the screw threads is compensated by balance pistons which - with all three spindles are arranged in the delivery chamber.
The idler spindles are turned hydraulically. The thread flanks
merely transmit the torque resulting from the liquid friction and
are consequently practically free of stress and nt subject to
any wear.
A groove ball bearing lubricated by the fluid to be pumped (with
internal bearing design) respectively an external, grease lubricated groove ball bearing serves for fixing the driving spindle.
A stuffing box or two shaft sealing rings or a maintenance-free
unbalanced mechanical seal as required is used as shaft sealing. By means of a return pipe, the sealing chamber is connected with the suction chamber. Therefore, irrespectively of the
delivery pressure, only the suction/inlet pressure always becomes effective at the shaft sealing.
Function
Owing to a special profiling of the flanks of the screw threads,
the three spindles form sealed chambers, the contents of which
are axially and completely continuously shifted from the suction to the delivery side of the pump. There is no turbulence
despite the rotational movement, and squeezing stresses are
avoided by the constant volume in the chambers.
Noise/pulsation
The structural design and mode of operation of the screw pump
ensure a very low noise level and a nearly pulsation-free delivery.
Performance data
A preliminary pump selection can be effected by means of the
performance tables (pages 6 to 13). For the exact performance
data as a function of the viscosity of the fluid to be pumped and
the pump speed, please refer to the individual characteristics.
Speed of rotation
Based on the small dimensions of the rotating screw spindles
and according to pump size and design rotational speeds up to
11000 1/min are possible. With very high speeds respectively
for determining the speed limit the suction/inlet pressure conditions, the design of the shaft sealing and of the bearing as well
as the running speed of the thread flanks have to be considered.
1
ALLWEILER
Series SN... ER..

Temperature and pressure limits
admissible temperature of fluid to be pumped
with stuffing box, design U2 and KA2
with shaft sealing rings, design U3 and U4
with mechanical seal, design U....
design D....
design E....
200C
80C
150C
80C
80-150C
admissible suction lift see

NPSH values, page 5
admissible pump outlet pressure
with pump casing in c.i. (GJL-25(0)
in s.g.c.i. (GJS;-400-15)
40 bar
64 bar
admissible supply pressure

with stuffing box, design U2 and KA2
with shaft sealing rings, design U3 and U4
with unbalanced mechanical seal
design U..., D... and E...
3,0 bar
1,5 bar
5,0 ...7,0 bar
40...2200
2900...3600
no grease nipple, groove ball bearing in closed design with lifetime grease filling.
Design E:
with grease nipple. A grease volume control

(labyrinth ring) prevents overgreasing of the
bearing and thus excessive heating up to the
bearing.
Branch position/flanges
SNH, SNF, SNS: suction and delivery branch arranged symmetrically on centerline of pump and opposed in one line.
The sense of flow may be changed without
alteration of sense of rotation by turning the
pump casing by 180.
SNGH, SNGF: suction and delivery branch arranged one
after the other (U-turn) on centerline of the
pump.
SNGS:
Shaft sealing
SN...
Design D, KA:
please refer to the individual characteristiics.

For delivery pressures up to 120 bar, please refer to series SM
(pamphlet VM 618 GB/...)
depending on fluid to be pumped, viscositty, speed of rotation, pump size.
With higher supply pressures inquiry at our works necessary.
Stuffing
Shaft seal
box
rings
with ... bearing
internal external 2 pcs. 3 pcs.
U2
KA2
U3
U4
In an external, grease lubricated groove ball bearing.
with higher temperatures inquiry of our works necessary

for the attainable delivery pressure as a function of viscosity and speed,
Pump size
Bearing
In an internal groove ball bearing.
Design U...:
the groove ball bearing is lubricated by the
fluid to be pumped.
Mechanical
seal
with ... bearing
inter. external
U...
D... E...
with graphite-incorporated PTFE packing

made of NBR (buna N) resp. FPM (Viton) (Viton at surplus price)
uncooled, maintenance-free mechanical seal of the unbalanced type
suction and delivery branch arranged superimposed (U-turn) on centerline of pump.

Flanges with all designs
Suction side:
PN16 acc. to DIN EN 1092-2 (up to DN 150)
PN10 acc. to DIN EN 1092-2 (from DN 200)
Delivery side:
PN40 acc. to DIN EN 1092-2
PN64 acc. to DIN 2546
only possible with pump casing in s.g.c.i. (GJS-400-15) against surplus price
Heating
For heating of pump, for instance when pumping heavy fuel oil
or other pumping liquids which solidify when getting cool, the
following heating devices are available:
see separate technical literature
Materials...12.1 (AQ1VGG)
Rotary seal ring:
Carbon, anttimony-impregnated
Stationary seal ring: Silicon cartbide (SiC)
Auxiliary sealings:
FPM (Viton)
Spring:
CrNiMo steel
Metal parts:
CrNiMo steel
An incorporated control valve serves for a slight excess pressure within the area of the shaft sealing. As a result hereof,
during suction operation, air intalke through the shaft sealing is
avoided an dry operation of the shaft sealing prevented. The
design KA2 has no control valve and therefore should not be
used for suction operation.
Series
Heating with
steam or heat conveyor
electrical
heating
elements
heating
cover
X
X
X
X
X
X
X
X
SNH
SNF
SNS
SNGH
SNGF
SNGS
heating
cartridges
jacketed
casing
X
X
X
X
X
X
X
X
X
Pumps with jacketed casing can only be supplied in fabricated steel design
(special technical documentation).
Special mechanical seals and/or other material designs upon inquiry.
For further details of pump heating please refer to page 35.
Material
Part-No.
Denomination
Material design
W1
Pump casing
c.i. (GJL-250)
c.i. (GJL-250)
s.g.c.i. (GJS-400-15)
s.g.c.i. (GJS-400-15)
Pump casing insert with size 40 to 120

with size 210 to 3600
Pump cover, drive side
Pump cover, non-drive side
Round pump foot (only with series SNS and SNGS)
Bearing housing (only with external bearing)
Shaft sealing housing (only with internal bearing)
Pump foot
Pump casing cover
Balance bush
Seal cover
Gland (only with design U2 and KA2)
Driving spindle
Idler spindle
c.i. (GJL-200) (11)

c.i. (GJL-250) (11)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
silafont
c.i. (GJL-250)
c.i. (GJL-250)
nitride steel
nitride steel
silafont (11)
silafont (11)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
silafont
c.i. (GJL-250)
c.i. (GJL-250)
nitride steel
nitride steel
silafont (11)
silafont (11)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
silafont
c.i. (GJL-250)
c.i. (GJL-250)
nitride steel
nitride steel
c.i. (GJL-200) (11)

c.i. (GJL-250) (11)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
c.i. (GJL-250)
silafont
c.i. (GJL-250)
c.i. (GJL-250)
nitride steel
nitride steel
3
4
4
5
5
6
7
8
9
9
12
13
W2
W3
W5
When determining the material for the pump casing insert note the pressure limiting characteristics.
For pumps in fabricated steel design (because of customers' specific demands) separate technical documention is available upon request.
Series SN...ER..
Abbreviations
ALLWEILER
Pressure relief valves
All pumps can be supplied with built-on pressure relief
valve. For allocation, dimensions and connections
please refer to page 36.
Valve characteristics and sectional drawings are not
included within this pamphlet and mustt be demanded
separately.
In case pumps without built-on pressure relief valve are
re-quired, an overload protection must be provided in
the control system or as a pipeline pressure relief valve.
For allocation, dimensions and connections of pressure
relief valves for pipeline installation please refer to page
37.
Shaft coupling and protectiom against accidental
contact
Shaft coupling according to DIN 740.
A protection according to DUN 24295 against accidental
con-tact also is supplied as soon as the scope of supply
includes pump, base plate and shaft coupling or when
an intermediate bracket, respectively brackett with feet
is included in the de-livery volume.
Drive
The pumps will be coupled either directly (Series SNH,
SNGH) or by means of an intermediate bracket (Series
SNS, SNGS), respectively of a bracket with feet for floor
or wall mounting (Series SNF, SNGF) with electric
motors of the most varied kinds or with other driving
engines.
In most cases, surface cooled, three phase A.C. short
circuit motors, construction B3 or V1 are provided;
enclosure IP54 according to IEC Standard, class B
insulation, motor windings for 400 V, 50 or 60 Hz.
ALLWEILER
Series SN...ER..
Unit-assembly principle
Three-screw pumps, SN series.
Same delivery elements with different types of casing construction.
For series SNC, SNG, SNT and SNTG pump dimensions and sectional
drawings are available upon request

For series SNHBA and SNFBA see pamphlet VM 639 GB/...
Pump casing insert + Screw spindle set
For submersible pumps designed to customers' specification dimensions
drawings will be prepared per order
Performance survey
For nominal pump outputs not covered by the type SN further pump series of single entry three-screw pumps are available according to the following survey (stated performances refer to 50 Hz speeds).
ALLWEILER
Series SN...ER..
NPSH req. (m)
The values as indicated apply to airless fluids to be pumped (a safety allowances of 0.5 m is already included). In case of fluids
to be pumped with air pockets (unsolved air), either the pump must be adapted or allowances on the stated NPSH values are
necessary. For these purposes, by all means inquire at our works.
For exact NPSH values in dependence of the viscosity (also for other viscosities than those mentioned below) and of the pump
rotational speed (also for other speeds of rotation than those mentioned below), please refer to the individual NPSH graphs.
Kinematic viscosity v
Pump
size
SN...
6 mm /s
40 mm2/s
380 mm2/s
Speed n [1/min]
Speed n [1/min]
Speed n [1/min]
1450 m
1750 m
2900 m
3500 m
1450 m
1750 m
2900 m
3500 m
1450 m
40-38
40-46
40-54
3,0
3,0
4,9
3,0
3,0
5,0
3,0
3,0
5,4
3,0
3,0
5,7
3,0
3,0
5,4
3,0
3,0
5,5
3,0
3,0
5,9
3,0
3,0
6,4
3,0
3,0
6,9
80-36
80-42
80-46
80-54
3,0
3,0
3,0
5,0
3,0
3,0
3,0
5,1
3,0
3,0
3,0
5,7
3,0
3,0
3,3
6,4
3,0
3,0
3,0
5,5
3,0
3,0
3,0
5,6
3,0
3,0
3,0
6,5
3,0
3,1
3,8
7,2
120-42
120-46
120-54
3,0
3,0
5,0
3,0
3,0
5,2
3,0
3,0
6,1
3,0
3,8
6,4
3,0
3,0
5,5
3,0
3,0
5,7
3,0
3,4
6,9
210-40
210-46
210-54
3,0
3,0
5,2
3,0
3,0
5,4
3,0
3,8
7,1
3,6
5,0
-
3,0
3,0
5,7
3,0
3,0
6,0
280-43
280-46
280-54
3,0
3,0
5,3
3,0
3,0
5,5
3,7
4,5
8,0
4,8
6,1
-
3,0
3,0
5,8
440-40
440-46
440-52
440-54
3,0
3,0
4,5
5,4
3,0
3,0
4,9
5,9
3,8
5,7
5,2
8,1
-
660-40
660-44
660-46
660-51
660-54
3,0
3,0
3,0
5,5
5,8
3,0
3,0
3,4
6,0
6,5
5,1
6,4
7,5
-
940-42
940-46
940-50
940-54
3,0
3,0
5,6
6,1
3,1
3,4
6,3
7,1
2900 m
3500 m
3,0
3,0
7,0
3,0
3,5
8,0
3,3
4,5
8,8
3,0
3,0
3,0
7,2
3,0
3,0
3,0
7,3
3,1
3,8
4,6
3,7
4,8
6,3
3,6
4,5
8,2
3,0
3,0
7,2
3,0
3,0
7,5
4,4
5,4
5,8
7,6
3,2
4,5
8,1
4,2
6,0
-
3,0
3,0
7,5
3,0
3,5
8,0
5,2
7,5
7,0
3,0
3,0
6,2
4,3
5,3
-
5,8
7,5
-
3,0
3,3
7,8
3,6
4,1
8,4
7,3
3,0
3,0
5,9
6,1
3,0
3,2
6,4
6,6
4,6
6,9
6,4
3,1
3,8
7,9
8,2
3,8
5,0
8,7
7,8
7,2
8,9
-
3,0
3,0
3,1
6,2
6,5
3,0
3,6
3,9
6,8
7,3
6,1
7,7
8,7
3,6
4,3
4,6
8,4
8,9
4,7
5,6
6,5
6,8
3,0
3,5
6,4
6,9
3,6
4,6
7,2
8,1
8,0
4,4
5,6
8,8
5,8
7,9
1300-38
1300-42
1300-44
1300-46
1300-54
3,0
3,0
3,0
3,4
6,6
3,0
3,6
4,0
4,6
8,0
6,0
8,3
-
3,0
3,3
3,6
4,0
7,5
3,4
4,2
4,8
5,4
7,4
4,1
5,2
5,8
7,6
5,4
7,2
8,2
1700-42
1700-46
3,2
4,3
3,8
5,0
6,1
8,5
3,4
5,4
4,6
6,6
7,9
2200-42
3,7
4,9
4,4
6,0
7,3
2200-46
4,2
6,3
5,3
7,6
2900-40
4,0
5,5
4,8
6,7
7,9
3600-46
5,7
8,1
6,9
1750 m
Inlet pressure necessary
ALLWEILER
Series SN...ER..
Performance table Delivery flow Q [1/min] and power absorbed P [kW]
n = 1450 1/min
Pump
size
Delivery
pressure
SN...
p bar
Q
l/min
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
29,20
26,90
22,90
19,20
15,70
38,70
35,70
30,10
25,00
51,10
46,20
37,40
53,70
50,00
43,40
37,30
31,60
26,00
64,50
59,50
50,50
42,20
34,30
76,90
72,00
63,00
54,70
100,00
92,30
77,90
91,90
85,50
73,80
63,10
52,90
110,00
104,00
92,30
81,50
145,00
135,00
116,00
-
40-38
40-46
40-54
80-36
80-42
80-46
80-54
120-42
120-46
120-54
v = 6 mm 2 /s
P
kW
0,42
0,168
1,21
1,75
2,28
0,50
0,86
1,57
2,28
0,63
1,10
2,06
0,70
1,18
2,15
3,12
4,09
5,06
0,80
1,39
2,57
3,74
4,92
0,90
1,60
2,98
4,37
1,13
2,05
3,88
1,19
2,03
3,69
5,36
7,02
1,35
2,33
4,31
6,28
1,68
2,99
5,62
-
v = 40 mm2/s
n = 2900 1/min
v = 380 mm2/s
v = 6 mm2/s
v = 40 mm2/s
v = 380 mm2/s
Q
l/min
P
kW
Q
l/min
P
kW
Q
l/min
P
kW
Q
l/min
P
kW
Q
l/min
P
kW
30,70
29,70
28,00
26,30
24,80
23,30
21,30
40,90
39,60
37,20
34,90
32,80
30,80
28,00
54,50
52,40
48,60
45,00
41,60
56,20
54,60
51,70
49,00
46,50
44,10
40,80
68,00
65,80
61,80
58,20
54,80
51,40
46,90
80,40
78,30
74,30
70,70
67,20
63,90
59,40
106,00
102,00
96,10
90,30
84,80
96,50
93,70
88,60
83,90
79,50
75,20
69,40
115,00
112,00
107,00
102,00
97,90
93,60
87,90
152,00
148,00
140,00
132,00
125,00
-
0,42
0,68
1,21
1,75
2,28
2,81
3,56
0,50
0,86
1,57
2,28
2,99
3,70
4,69
0,63
1,10
2,06
3,01
3,96
0,70
1,18
2,15
3,12
4,09
5,06
6,42
0,80
1,39
2,57
3,74
4,92
6,10
7,75
0,90
1,60
2,98
4,37
5,75
7,14
9,08
1,13
2,05
3,88
5,72
7,55
1,19
2,03
3,69
5,36
7,02
8,69
11,00
1,35
2,33
4,31
6,28
8,25
10,20
13,00
1,68
2,99
5,62
8,25
10,90
-
31,50
31,10
30,50
29,90
29,30
28,80
28,10
42,00
41,50
40,60
39,80
39,00
38,20
37,20
56,20
55,40
54,00
52,60
51,40
50,10
48,50
57,50
56,90
55,90
54,90
54,00
53,10
51,90
69,70
68,90
67,40
66,10
64,80
63,60
62,00
82,20
81,40
79,90
78,60
77,30
76,10
74,40
109,00
107,00
105,00
103,00
101,00
98,80
96,10
98,70
97,70
95,80
94,10
92,50
90,90
88,80
117,00
116,00
114,00
113,00
111,00
109,00
107,00
156,00
154,00
151,00
148,00
146,00
143,00
140,00
0,42
0,68
1,21
1,75
2,28
2,81
3,56
0,50
0,86
1,57
2,28
2,99
3,70
4,69
0,63
1,10
2,06
3,01
3,96
4,92
6,25
0,70
1,18
2,15
3,12
4,09
5,06
6,42
0,80
1,39
2,57
3,74
4,92
6,10
7,75
0,90
1,60
2,98
4,37
5,75
7,14
9,08
1,13
2,05
3,88
5,72
7,55
9,39
12,00
1,19
2,03
3,69
5,36
7,02
8,69
11,00
1,35
2,33
4,31
6,28
8,25
10,20
13,00
1,68
2,99
5,62
8,25
10,90
13,50
17,20
61,10
58,90
54,80
51,10
47,60
44,20
39,60
81,30
78,20
72,70
67,60
62,70
58,00
108,00
103,00
94,60
86,40
112,00
108,00
102,00
95,50
89,80
84,20
76,70
135,00
130,00
121,00
113,00
105,00
97,40
160,00
155,00
146,00
138,00
130,00
122,00
210,00
202,00
188,00
175,00
192,00
185,00
174,00
163,00
153,00
143,00
229,00
222,00
211,00
200,00
190,00
180,00
303,00
293,00
274,00
257,00
-
1,13
1,66
2,73
3,79
4,86
5,92
7,41
1,31
2,02
3,44
4,86
6,28
7,70
1,55
2,51
4,41
6,32
1,81
2,78
4,72
6,66
8,60
10,50
13,30
2,02
3,20
5,55
7,91
10,30
12,60
2,23
3,61
6,38
9,16
11,90
14,70
2,68
4,51
8,18
11,90
3,11
4,77
8,10
11,40
14,80
18,10
3,41
5,39
9,33
13,30
17,20
21,20
4,07
6,70
12,00
17,20
-
62,60
61,70
59,90
58,30
56,70
55,20
53,20
83,50
82,10
79,70
77,50
75,40
73,40
70,60
112,00
110,00
106,00
102,00
98,80
95,60
91,20
114,00
113,00
110,00
107,00
105,00
102,00
99,00
139,00
136,00
133,00
129,00
125,00
122,00
118,00
164,00
161,00
157,00
154,00
150,00
147,00
143,00
216,00
213,00
206,00
200,00
195,00
190,00
183,00
196,00
194,00
189,00
184,00
179,00
175,00
169,00
233,00
230,00
225,00
221,00
216,00
212,00
206,00
310,00
306,00
297,00
290,00
283,00
276,00
267,00
1,13
1,66
2,73
3,79
4,86
5,92
7,41
1,31
2,02
3,44
4,86
6,28
7,70
9,68
1,55
2,51
4,41
6,32
8,23
10,10
12,80
1,81
2,78
4,72
6,66
8,60
10,50
13,30
2,02
3,20
5,55
7,91
10,30
12,60
15,90
2,23
3,61
6,38
9,16
11,90
14,70
18,60
2,68
4,51
8,18
11,90
15,50
19,20
24,30
3,11
4,77
8,10
11,40
14,80
18,10
22,80
3,41
5,39
9,33
13,30
17,20
21,20
26,70
4,07
6,70
12,00
17,20
22,50
27,70
35,10
63,40
63,10
62,40
61,80
61,30
60,70
60,00
84,50
84,00
83,20
82,30
81,60
80,80
79,80
113,00
113,00
111,00
110,00
109,00
107,00
106,00
116,00
115,00
114,00
113,00
112,00
111,00
110,00
140,00
140,00
138,00
137,00
136,00
134,00
133,00
165,00
165,00
163,00
162,00
160,00
159,00
158,00
219,00
217,00
215,00
213,00
211,00
209,00
206,00
199,00
198,00
196,00
194,00
192,00
191,00
189,00
236,00
234,00
233,00
231,00
229,00
228,00
226,00
314,00
312,00
309,00
306,00
304,00
301,00
298,00
1,13
1,66
2,73
3,79
4,86
5,92
7,41
1,31
2,02
3,44
4,86
6,28
7,70
9,68
1,55
2,51
4,41
6,32
8,23
10,10
12,80
1,81
2,78
4,72
6,66
8,60
10,50
13,30
2,02
3,20
5,55
7,91
10,30
12,60
15,90
2,23
3,61
6,38
9,16
11,90
14,70
18,60
2,68
4,51
8,18
11,90
15,50
19,20
24,30
3,11
4,77
8,10
11,40
14,80
18,10
22,80
3,41
5,39
9,33
13,30
17,20
21,20
26,70
4,07
6,70
12,00
17,20
22,50
27,70
35,10
The performance datas are valid for all designs. For exact deliveries as a function of the viscosity of the fluid to be pumped (also for other viscosities
than those mentioned above) and the pump speed, please refer to the individual characteristics.
6
VM 617 GB / 11.98
4000
ALLWEILER
Series SN...ER..

n = 1450 1/min
Pump
size
Delivery
pressure
SN...
p bar
Q
l/min
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
160,00
153,00
139,00
127,00
116,00
200,00
190,00
172,00
155,00
263,00
247,00
218,00
233,00
221,00
199,00
179,00
266,00
254,00
232,00
212,00
350,00
331,00
296,00
335,00
322,00
300,00
280,00
260,00
425,00
408,00
377,00
349,00
492,00
465,00
416,00
552,00
525,00
476,00
-
210-40
210-46
210-54
280-43
280-46
280-54
440-40
440-46
440-52
440-54
v = 6 mm 2 /s
P
kW
1,97
3,38
6,19
9,01
11,80
2,33
4,10
7,63
11,20
2,92
5,28
9,99
2,92
4,98
9,11
13,20
3,19
5,53
10,20
14,90
3,97
7,09
13,30
4,17
7,09
12,90
18,80
24,60
4,96
8,68
16,10
23,50
5,63
10,00
18,80
6,13
11,00
20,80
-
v = 40 mm2/s
Q
l/min
165,00
162,00
156,00
151,00
146,00
141,00
134,00
207,00
202,00
195,00
187,00
180,00
174,00
165,00
274,00
267,00
255,00
243,00
232,00
241,00
236,00
227,00
218,00
210,00
202,00
191,00
274,00
269,00
259,00
251,00
242,00
234,00
223,00
364,00
355,00
340,00
326,00
313,00
343,00
338,00
328,00
319,00
311,00
303,00
292,00
436,00
429,00
416,00
403,00
392,00
380,00
365,00
510,00
499,00
477,00
458,00
439,00
421,00
571,00
559,00
538,00
518,00
500,00
-
n =2900 1/min
v = 380 mm2/s
P
kW
Q
l/min
P
kW
1,97
3,38
6,19
9,01
11,80
14,60
18,60
2,33
4,10
7,63
11,20
14,70
18,20
23,20
2,92
5,28
9,99
14,70
19,40
2,92
4,98
9,11
13,20
17,40
21,50
27,30
3,19
5,53
10,20
14,90
19,60
24,20
30,80
3,97
7,09
13,30
19,60
25,80
4,17
7,09
12,90
18,80
24,60
30,40
38,60
4,96
8,68
16,10
23,50
31,00
38,40
48,80
5,63
10,00
18,80
27,50
36,30
45,00
6,13
11,00
20,80
30,50
40,30
-
168,00
166,00
164,00
162,00
161,00
159,00
156,00
210,00
209,00
206,00
203,00
201,00
198,00
195,00
280,00
277,00
273,00
268,00
264,00
260,00
255,00
245,00
243,00
240,00
237,00
234,00
231,00
227,00
278,00
276,00
273,00
269,00
266,00
263,00
259,00
370,00
367,00
362,00
356,00
351,00
347,00
340,00
348,00
346,00
342,00
339,00
336,00
332,00
328,00
442,00
440,00
435,00
430,00
426,00
422,00
416,00
520,00
515,00
508,00
500,00
493,00
487,00
478,00
580,00
576,00
568,00
561,00
554,00
547,00
538,00
1,97
3,38
6,19
9,01
11,80
14,60
18,60
2,33
4,10
7,63
11,20
14,70
18,20
23,20
2,92
5,28
9,99
14,70
19,40
24,10
30,70
2,92
4,98
9,11
13,20
17,40
21,50
27,30
3,19
5,53
10,20
14,90
19,60
24,20
30,80
3,97
7,09
13,30
19,60
25,80
32,00
40,80
4,17
7,09
12,90
18,80
24,60
30,40
38,60
4,96
8,68
16,10
23,50
31,00
38,40
48,80
5,63
10,00
18,80
27,50
36,30
45,00
57,30
6,13
11,00
20,80
30,50
40,30
50,10
63,70
v = 6 mm2/s
Q
l/min
329,00
322,00
308,00
296,00
285,00
274,00
412,00
402,00
384,00
367,00
352,00
336,00
546,00
530,00
501,00
475,00
481,00
469,00
447,00
427,00
408,00
389,00
546,00
534,00
512,00
492,00
473,00
455,00
724,00
705,00
670,00
638,00
685,00
673,00
650,00
630,00
610,00
591,00
870,00
853,00
823,00
795,00
768,00
742,00
1017,00
990,00
941,00
896,00
853,00
1138,00
1111,00
1062,00
1017,00
-
P
kW
5,06
7,87
13,50
19,10
24,80
30,40
5,78
9,31
16,40
23,50
30,50
37,60
6,96
11,70
21,10
30,50
7,53
11,70
19,90
28,20
36,50
44,70
8,08
12,80
22,10
31,50
40,80
50,20
9,64
15,90
28,30
40,80
10,80
16,70
28,30
40,00
51,70
63,40
12,40
19,90
34,70
49,60
64,40
79,30
13,80
22,50
40,00
57,50
75,00
14,80
24,50
44,00
63,60
-
v = 40 mm2/s
Q
l/min
334,00
331,00
325,00
320,00
315,00
310,00
303,00
419,00
415,00
407,00
400,00
393,00
386,00
377,00
557,00
550,00
538,00
526,00
515,00
504,00
490,00
489,00
484,00
475,00
466,00
457,00
449,00
439,00
555,00
549,00
540,00
531,00
523,00
515,00
504,00
738,00
729,00
714,00
700,00
687,00
674,00
657,00
694,00
688,00
678.00
669.00
661,00
653,00
642,00
882,00
875,00
861,00
849,00
837,00
826,00
811,00
1036,00
1024,00
1003,00
983,00
964,00
946,00
922,00
P
kW
5,06
7,87
13,50
19,10
24,80
30,40
38,30
5,78
9,31
16,40
23,50
30,50
37,60
47,50
6,96
11,70
21,10
30,50
40,00
49,40
62,60
7,53
11,70
19,90
28,20
36,50
44,70
56,30
8,08
12,80
22,10
31,50
40,80
50,20
63,30
9,64
15,90
28,30
40,80
53,30
65,80
83,20
10,80
16,70
28,30
40,00
51,70
63,40
79,70
12,40
19,90
34,70
49,60
64,40
79,30
100,00
13,80
22,50
40,00
57,50
75,00
92,50
117,00
v = 380 mm2/s
Q
l/min
337,00
335,00
333,00
331,00
330,00
328,00
325,00
422,00
421,00
418,00
415,00
413,00
410,00
407,00
563,00
560,00
555,00
551,00
547,00
543,00
538,00
493,00
491,00
488,00
485,00
481,00
478,00
474,00
559,00
557,00
553,00
550,00
547,00
544,00
540,00
744,00
741,00
736,00
731,00
726,00
721,00
714,00
698,00
696,00
692,00
689,00
686,00
683,00
678,00
888,00
885,00
880,00
876,00
871,00
867,00
862,00
1045,00
1041,00
1033,00
1025,00
1019,00
1012,00
1003,00
P
kW
5,06
7,87
13,50
19,10
24,80
30,40
38,30
5,78
9,31
16,40
23,50
30,50
37,60
47,50
6,96
11,70
21,10
30,50
40,00
49,40
62,60
7,53
11,70
19,90
28,20
36,50
44,70
56,30
8,08
12,80
22,10
31,50
40,80
50,20
63,30
9,64
15,90
28,30
40,80
53,30
65,80
83,20
10,80
16,70
28,30
40,00
51,70
63,40
79,70
12,40
19,90
34,70
49,60
64,40
79,30
100,00
13,80
22,50
40,00
57,50
75,00
92,50
117,00
The performance datas are valid for all designs. For exact deliveries as a f unction of the viscosity of the fluid to be pumped (also for other viscosities than
those mentioned above) and the pump speed, please refer to the individual characteristics.
VM 617 GB / 11.98
4001
ALLWEILER
Series SN...ER..

Pump
size
Delivery
pressure
SN...
p bar
n = 1450 1/min
2
v = 6 mm /s
Q
l/min
v = 40 mm /s
Q
l/min
531,00
524,00
511,00
499,00
488,00
477,00
462,00
P
kW
6,30
10,80
19,80
28,80
37,80
46,80
59,50
n =2900 1/min
2
v = 380 mm /s
Q
l/min
537,00
534,00
530,00
525,00
521,00
517,00
511,00
P
kW
6,30
10,80
19,80
28,80
37,80
46,80
59,50
v = 6 mm /s
Q
l/min
1060,00
1044,00
1014,00
987,00
960,00
935,00
-
P
kW
16,20
25,20
43,20
61,20
79,30
97,30
-
v = 40 mm2/s
Q
l/min
v = 380 mm2/s
Q
l/min
660-40
5
10
20
30
40
50
64
520,00
503,00
474,00
446,00
-
P
kW
6,30
10,30
19,80
28,80
-
1072,00
1065,00
1052,00
1040,00
1028,00
1017,00
1002,00
P
kW
16,20
25,20
43,20
61,20
79,30
97,30
123,00
1078,00
1075,00
1070,00
1066,00
1061,00
1057,00
1052,00
P
kW
16,20
25,20
43,20
61,20
79,30
97,30
123,00
660-44
5
10
20
30
40
50
64
587,00
565,00
524,00
486,00
-
6,93
12,10
22,30
32,60
-
603,00
593,00
575,00
559,00
543,00
529,00
-
6,93
12,10
22,30
32,60
42,80
53,10
-
611,00
607,00
601,00
594,00
589,00
583,00
576,00
6,93
12,10
22,30
32,60
42,80
53,10
67,40
1202,00
1180,00
1139,00
1102,00
1066,00
-
17,50
27,70
48,20
68,70
89,20
-
1218,00
1209,00
1191,00
1174,00
1159,00
1144,00
1124,00
17,50
27,70
48,20
68,70
89,20
110,00
138,00
1226,00
1222,00
1316,00
1210,00
1204,00
1198,00
1191,00
17,50
27,70
48,20
68,70
89,20
110,00
138,00
660-46
5
10
20
30
40
50
64
637,00
614,00
574,00
-
7,34
12,90
24,00
-
653,00
643,00
625,00
609,00
593,00
578,00
-
7,34
12,90
24,00
35,10
46,10
57,20
-
661,00
657,00
650,00
644,00
639,00
633,00
625,00
7,34
12,90
24,00
35,10
46,10
57,20
72,80
1302,00
1280,00
1239,00
1201,00
1166,00
-
18,30
29,40
51,50
73,70
95,90
-
1318,00
1308,00
1291,00
1274,00
1259,00
1244,00
1223,00
18,30
29,40
51,50
73,70
95,90
118,00
149,00
1326,00
1322,00
1316,00
1310,00
1304,00
1298,00
1291,00
18,30
29,40
51,50
73,70
95,90
118,00
149,00
660-51
5
10
20
30
40
50
64
745,00
709,00
644,00
-
8,38
15,00
28,10
-
770,00
755,00
726,00
700,00
675,00
-
8,38
15,00
28,10
41,30
54,50
-
783,00
777,00
766,00
757,00
747,00
738,00
726,00
8,38
15,00
28,10
41,30
54,50
67,60
86,10
1535,00
1499,00
1433,00
1373,00
-
20,40
33,50
59,90
86,20
-
1560,00
1544,00
1516,00
1490,00
1465,00
1441,00
-
20,40
33,50
59,90
86,20
113,00
139,00
-
1573,00
1567,00
1556,00
1546,00
1537,00
1528,00
1516,00
20,40
33,50
59,90
86,20
113,00
139,00
176,00
660-54
5
10
20
30
40
50
64
853,00
817,00
752,00
-
9,28
16,80
31,70
-
878,00
863,00
834,00
808,00
-
9,28
16,80
31,70
46,70
-
891,00
885,00
874,00
865,00
855,00
847,00
835,00
9,28
16,80
31,70
46,70
61,70
76,60
97,60
1751,00
1715,00
1650,00
1589,00
-
22,20
37,10
67,10
97,00
-
1776,00
1761,00
1732,00
1706,00
1681,00
1657,00
-
22,20
37,10
67,10
97,00
127,00
157,00
-
1789,00
1783,00
1772,00
1763,00
1753,00
1745,00
1733,00
22,20
37,10
67,10
97,00
127,00
157,00
199,00
940-42
5
10
20
30
40
50
64
753,00
724,00
671,00
622,00
-
9,16
15,70
28,90
42,00
-
773,00
761,00
738,00
716,00
696,00
677,00
-
9,16
15,70
28,90
42,00
55,20
68,40
-
783,00
779,00
770,00
762,00
755,00
748,00
738,00
9,16
15,70
28,90
42,00
55,20
68,40
86,80
1542,00
1513,00
1460,00
1412,00
1365,00
-
23,50
36,60
62,90
89,20
116,00
-
1563,00
1550,00
1527,00
1506,00
1486,00
1466,00
1440,00
23,50
36,60
62,90
89,20
116,00
142,00
179,00
1573,00
1568,00
1559,00
1552,00
1544,00
1537,00
1527,00
23,50
36,60
62,90
89,20
116,00
142,00
179,00
940-46
5
10
20
30
40
50
64
911,00
882,00
829,00
-
10,50
18,40
34,20
-
931,00
919,00
896,00
874,00
854,00
835,00
-
10,50
18,40
34,20
49,90
65,70
81,50
-
941,00
937,00
928,00
920,00
913,00
905,00
896,00
10,50
18,40
34,20
49,90
65,70
81,50
104,00
1858,00
1829,00
1776,00
1727,00
1681,00
-
26,10
41,90
73,50
105,00
137,00
-
1878,00
1866,00
1843,00
1821,00
1801,00
1782,00
1756,00
26,10
41,90
73,50
105,00
137,00
168,00
212,00
1888,00
1884,00
1875,00
1867,00
1860,00
1853,00
1843,00
26,10
41,90
73,50
105,00
137,00
168,00
212,00
940-50
5
10
20
30
40
50
64
1020,00
974,00
889,00
-
11,60
20,60
38,50
-
1053,00
1033,00
996,00
962,00
930,00
-
11,60
20,60
38,50
56,50
74,50
-
1069,00
1062,00
1048,00
1036,00
1024,00
1012,00
997,00
11,60
20,60
38,50
56,50
74,50
92,50
118,00
2099,00
2052,00
1968,00
1890,00
-
28,30
46,30
86,20
118,00
-
2132,00
2112,00
2075,00
2041,00
2009,00
1977,00
1935,00
28,30
46,30
82,20
118,00
154,00
190,00
240,00
2148,00
2140,00
2127,00
2114,00
2102,00
2091,00
2075,00
28,30
46,30
82,20
118,00
154,00
190,00
240,00
940-54
5
10
20
30
40
50
64
1205,00
1158,00
1074,00
-
13,10
23,60
44,70
-
1237,00
1217,00
1180,00
1146,00
-
13,10
23,60
44,70
65,70
-
1253,00
1246,00
1232,00
1220,00
1208,00
1196,00
1181,00
13,10
23,60
44,70
65,70
86,80
108,00
137,00
2467,00
2421,00
2336,00
2258,00
-
31,40
52,40
94,50
137,00
-
2500,00
2480,00
2443,00
2409,00
2377,00
2346,00
-
31,40
52,40
94,50
137,00
179,00
221,00
-
2516,00
2509,00
2495,00
2483,00
2471,00
2459,00
2444,00
31,40
52,40
94,50
137,00
179,00
221,00
280,00
than those mentioned above) and the pump speed, please refer to the individual characteristics
VM 617 GB/11.98
4002
ALLWEILER
Series SN...ER..
Pump
size
Delivery
pressure
SN...
p bar
n = 1450 1/min
2
v = 6 mm /s
v = 40 mm /s
n =2900 1/min
2
v = 380 mm /s
v = 6 mm /s
v = 40 mm2/s
v = 380 mm2/s
1300-38
5
10
20
30
40
50
64
Q
l/min
902,00
875,00
827,00
782,00
-
P
kW
11,30
19,10
34,70
50,30
-
Q
l/min
921,00
909,00
888,00
869,00
850,00
832,00
808,00
P
kW
11,30
19,10
34,70
50,30
65,90
81,50
103,00
Q
l/min
930,00
926,00
918,00
911,00
904,00
897,00
888,00
P
kW
11,30
19,10
34,70
50,30
65,90
81,50
103,00
Q
l/min
1837,00
1811,00
1762,00
1717,00
1675,00
1634,00
-
P
kW
29,70
45,30
76,50
108,00
139,00
170,00
-
Q
l/min
1856,00
1845,00
1823,00
1804,00
1785,00
1768,00
1 743,00
P
kW
29,70
45,30
76,50
108,00
139,00
170,00
214,00
Q
l/min
1865,00
1861,00
1853,00
1846,00
1839,00
1833,00
1824,00
P
kW
29,70
45,30
76,50
108,00
139,00
170,00
214,00
1300-42
5
10
20
30
40
50
64
1072,00
1035,00
969,00
907,00
-
12,80
22,20
40,80
59,40
-
1097,00
1081,00
1052,00
1026,00
1000,00
976,00
-
12,80
22,20
40,80
59,40
78,00
96,60
-
1110,00
1104,00
1093,00
1083,00
1074,00
1065,00
1053,00
12,80
22,20
40,80
59,40
78,00
96,60
123,00
2189,00
2152,00
2086,00
2025,00
1967,00
-
32,70
51,40
88,60
126,00
163,00
-
2215,00
2199,00
2170,00
2143,00
2118,00
2093,00
2060,00
32,70
51,40
88,60
126,00
1 63,00
200,00
252,00
2227,00
2221,00
2211,00
2201,00
2191,00
2182,00
2170,00
32,70
51,40
88,60
126,00
163,00
200,00
252,00
1300-44
5
10
20
30
40
50
64
1149,00
1113,00
1047,00
985,00
-
13,50
23,50
43,40
63,30
-
1175,00
1159,00
1130,00
1104,00
1078,00
1054,00
-
13,50
23,50
43,40
63,30
83,20
103,00
-
1188,00
1182,00
1171,00
1161,00
1152,00
1143,00
1131,00
13,50
23,50
43,40
63,30
83,20
103,00
131,00
1300-46
5
10
20
30
40
50
64
1253,00
1217,00
1150,00
-
14,40
25,20
46,80
-
1279,00
1263,00
1234,00
1208,00
1182,00
1158,00
-
14,40
25,20
46,80
68,50
90,10
112,00
-
1292,00
1286,00
1275,00
1265,00
1256,00
1247,00
1235,00
14,40
25,20
46,80
68,50
90,10
112,00
142,00
1300-54
5
10
20
30
40
50
64
1655,00
1596,00
1490,00
-
17,90
32,30
61,10
-
1696,00
1670,00
1624,00
1581,00
-
17,90
32,30
61,10
89,90
-
1716,00
1707,00
1690,00
1674,00
1659,00
1644,00
1625,00
17,90
32,30
61,10
89,90
119,00
148,00
188,00
5
10
20
30
40
50
64
5
10
20
30
40
50
64
1437,00
1391,00
1310,00
1234,00
1673,00
1627,00
1545,00
-
17,20
29,70
54,60
79,50
19,20
33,60
62,40
-
1469,00
1449,00
1414,00
1381,00
1349,00
1319,00
1705,00
1685,00
1649,00
1617,00
1585,00
1555,00
-
17,20
29,70
54,60
79,50
104,00
129,00
19,20
33,60
62,40
91,20
120,00
149,00
-
1484,00
1477,00
1464,00
1452,00
1440,00
1429,00
1414,00
1720,00
1713,00
1700,00
1688,00
1676,00
1665,00
1650,00
17,20
29,70
54,60
79,50
104,00
129,00
164,00
19,20
33,60
62,40
91,20
120,00
149,00
189,00
2200-42
5
10
20
30
40
50
64
1877,00
1823,00
1724,00
1633,00
-
22,50
38,80
71,20
104,00
-
1916,00
1892,00
1849,00
1809,00
1772,00
1735,00
-
22,50
38,80
71,20
104,00
136,00
168,00
-
1935,00
1926,00
1910,00
1895,00
1881,00
1868,00
1850,00
22,50
38,80
71,20
104,00
136,00
1 68,00
214,00
2200-46
5
10
20
30
40
50
64
2177,00
2122,00
2023,00
-
25,00
43,70
81,20
-
2215,00
2191,00
2148,00
2109,00
2071,00
2035,00
-
25,00
43,70
81,20
119,00
156,00
193,00
-
2234,00
2225,00
2209,00
2195,00
2181,00
2167,00
2149,00
25,00
43,70
81,20
119,00
156,00
193,00
246,00
2900-40
5
10
20
30
40
50
64
2769,00
2693,00
2555,00
-
33,40
57,30
105,00
-
2823,00
2790,00
2730,00
2674,00
2621,00
2570,00
-
33,40
57,30
105,00
153,00
201,00
248,00
-
2849,00
2837,00
2815,00
2794,00
2775,00
2756,00
2731,00
33,40
57,30
105,00
153,00
201,00
248,00
315,00
3600-46
5
10
20
30
40
50
64
3470,00
3393,00
3255,00
-
39,30
69,00
128,00
-
3523,00
3490,00
3430,00
3374,00
3321,00
-
39,30
69,00
128,00
188,00
247,00
-
3550,00
3537,00
3515,00
3495,00
3475,00
3456,00
3431,00
39,30
69,00
128,00
188,00
247,00
307,00
390,00
1700-42
1700-46
VM 617 GB / 11.98
4003
ALLWEILER
Series SN...ER.
Pump
size
Delivery
pressure
SN...
p bar
40-38
40-46
40-54
80-36
80-42
80-46
80-54
120-42
120-46
120-54
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
n = 1450 1/min
v = 6 mm 2 /s
Q
l/min
35,80
33,50
29,50
25,80
22,30
18,90
47,50
44,50
38,90
33,80
62,90
58,00
49,20
65,70
62,00
55,50
49,40
43,60
38,00
79,10
74,10
65,10
56,80
48,90
94,10
89,20
80,20
71,90
123,00
115,00
101,00
113,00
106,00
94,50
83,80
73,50
135,00
128,00
117,00
106,00
178,00
167,00
149,00
-
P
kW
0,54
0,86
1,50
2,15
2,79
3,43
0,65
1,07
1,93
2,79
0,79
1,37
2,52
0,89
1,48
2,65
3,82
4,99
6,16
1,02
1,73
3,15
4,57
5,99
1,14
1,98
3,65
5,32
1,41
2,52
4,74
1,53
2,54
4,55
6,56
8,57
1,72
2,91
5,29
7,67
2,11
3,70
6,87
-
v = 40 mm2/s
n =2900 1/min
v = 380 mm2/s
v = 6 mm2/s
v = 40 mm2/s
v = 380 mm2/s
Q
l/min
P
kW
Q
l/min
P
kW
Q
l/min
P
kW
Q
l/min
P
kW
Q
l/min
P
kW
37,30
36,30
34,60
32,90
31,40
29,90
27,90
49,70
48,40
46,00
43,70
41,60
39,60
36,80
66,40
64,20
60,40
56,80
53,50
50,20
68,20
66,60
63,80
61,10
58,50
56,10
52,80
82,60
80,40
76,50
72,80
69,40
66,10
61,60
97,60
95,50
91,50
87,90
84,40
81,10
76,60
129,00
125,00
119,00
113,00
108,00
102,00
117,00
114,00
109,00
105,00
100,00
95,90
90,10
139,00
137,00
132,00
127,00
122,00
118,00
112,00
185,00
180,00
172,00
165,00
158,00
151,00
-
0,54
0,86
1,50
2,15
2,79
3,43
4,33
0,65
1,07
1,93
2,79
3,64
4,50
5,70
0,79
1,37
2,52
3,67
4,82
5,97
0,89
1,48
2,65
3,82
4,99
6,16
7,80
1,02
1,73
3,15
4,57
5,99
7,41
9,40
1,14
1,98
3,65
5,32
7,00
8,67
11,00
1,41
2,52
4,74
6,95
9,17
11,40
1,53
2,54
4,55
6,56
8,57
10,60
13,40
1,72
2,91
5,29
7,67
10,10
12,40
15,80
2,11
3,70
6,87
10,00
13,20
16,40
-
38,10
37,70
37,10
36,50
35,90
35,40
34,70
50,80
50,30
49,40
48,60
47,80
47,10
46,00
68,00
67,20
65,80
64,50
63,20
62,00
60,30
69,50
68,90
67,90
66,90
66,00
65,10
63,90
84,30
83,50
82,10
80,70
79,50
78,20
76,60
99,40
98,60
97,10
95,80
94,50
93,30
91,60
131,00
130,00
128,00
126,00
124,00
122,00
119,00
119,00
118,00
117,00
115,00
113,00
112,00
110,00
142,00
141,00
139,00
137,00
135,00
134,00
132,00
188,00
187,00
184,00
181,00
178,00
176,00
173,00
0,54
0,86
1,50
2,15
2,79
3,43
4,33
0,65
1,07
1,93
2,79
3,64
4,50
5,70
0,79
1,37
2,52
3,67
4,82
5,97
7,58
0,89
1,48
2,65
3,82
4,99
6,16
7,80
1,02
1,73
3,15
4,57
5,99
7,41
9,40
1,14
1,98
3,65
5,32
7,00
8,67
11,00
1,41
2,52
4,74
6,95
9,17
11,40
14,50
1,53
2,54
4,55
6,56
8,57
10,60
13,40
1,72
2,91
5,29
7,67
10,10
12,40
15,80
2,11
3,70
6,87
10,00
13,20
16,40
20,80
74,30
72,10
68,10
64,40
60,80
57,40
52,80
98,90
95,90
90,30
85,20
80,30
75,70
132,00
127,00
118,00
110,00
102,00
136,00
132,00
126,00
120,00
114,00
108,00
101,00
164,00
159,00
150,00
142,00
134,00
127,00
116,00
194,00
190,00
181,00
172,00
164,00
157,00
256,00
248,00
234,00
220,00
208,00
233,00
227,00
215,00
204,00
194,00
184,00
171,00
278,00
217,00
260,00
249,00
239,00
229,00
368,00
358,00
339,00
322,00
306,00
-
1,52
2,16
3,44
4,73
6,01
7,30
9,10
1,73
2,59
4,30
6,01
7,72
9,44
2,02
3,18
5,48
7,78
10,10
2,39
3,56
5,91
8,25
10,60
12,90
16,20
2,65
4,07
6,91
9,75
12,60
15,40
19,40
2,90
4,57
7,91
11,30
14,60
17,90
3,44
5,66
10,10
14,50
19,00
4,11
6,12
10,10
14,20
18,20
22,20
27,80
4,48
6,86
11,60
16,40
21,10
25,90
5,27
8,45
14,80
21,10
27,50
-
75,90
74,90
73,10
71,50
69,90
68,40
66,40
101,00
99,80
97,30
95,10
93,00
91,00
88,20
135,00
133,00
129,00
126,00
122,00
119,00
115,00
138,00
137,00
134,00
131,00
129,00
126,00
123,00
168,00
166,00
162,00
158,00
155,00
151,00
147,00
198,00
196,00
192,00
188,00
185,00
181,00
177,00
262,00
258,00
252,00
246,00
241,00
235,00
228,00
238,00
235,00
230,00
225,00
221,00
217,00
211,00
282,00
279,00
274,00
270,00
265,00
261,00
255,00
375,00
371,00
363,00
355,00
348,00
341,00
332,00
1,52
2,16
3,44
4,73
6,01
7,30
9,10
1,73
2,59
4,30
6,01
7,72
9,44
11,80
2,02
3,18
5,48
7,78
10,10
12,40
15,60
2,39
3,56
5,91
8,25
10,60
12,90
16,20
2,65
4,07
6,91
9,75
12,60
15,40
19,40
2,90
4,57
7,91
11,30
14,60
17,90
22,60
3,44
5,66
10,10
14,50
19,00
23,40
29,60
4,11
6,12
10,10
14,20
18,20
22,20
27,80
4,48
6,86
11,60
16,40
21,10
25,90
32,60
5,27
8,45
14,80
21,10
27,50
33,80
42,70
76,60
76,30
75,60
75,00
74,50
73,90
73,20
102,00
102,00
101,00
100,00
99,20
98,40
97,40
137,00
136,00
135,00
134,00
132,00
131,00
129,00
140,00
139,00
138,00
137,00
136,00
135,00
134,00
170,00
169,00
167,00
166,00
165,00
164,00
162,00
200,00
199,00
197,00
196,00
195,00
194,00
192,00
264,00
263,00
261,00
259,00
257,00
255,00
252,00
240,00
239,00
237,00
235,00
234,00
232,00
230,00
284,00
283,00
282,00
280,00
278,00
277,00
275,00
379,00
377,00
374,00
372,00
369,00
366,00
363,00
1,52
2,16
3,44
4,73
6,01
7,30
9,10
1,73
2,59
4,30
6,01
7,72
9,44
11,80
2,02
3,18
5,48
7,78
10,10
12,40
15,60
2,39
3,56
5,91
8,25
10,60
12,90
16,20
2,65
4,07
6,91
9,75
12,60
15,40
19,40
2,90
4,57
7,91
11,30
14,60
17,90
22,60
3,44
5,66
10,10
14,50
19,00
23,40
29,60
4,11
6,12
10,10
14,20
18,20
22,20
27,80
4,48
6,86
11,60
16,40
21,10
25,90
32,60
5,27
8,45
14,80
21,10
27,50
33,80
42,70
The performance datas are valid for all designs. For exact deliveries as a f unction of the viscosity of the fluid to be pumped (also for other viscosities
10
VM 617 GB / 11.98
4004
ALLWEILER
Series SN...ER..
Pump
size
Delivery
pressure
SN...
p bar
210-40
210-46
210-54
280-43
280-46
280-54
440-40
440-46
440-52
440-54
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
n = 1450 1/min
v = 6 mm 2 /s
v = 40 mm2/s
n =2900 1/min
v = 380 mm2/s
Q
l/min
P
kW
Q
l/min
P
kW
Q
l/min
P
kW
195,00
188,00
174,00
162,00
151,00
244,00
234,00
216,00
199,00
322,00
306,00
277,00
284,00
272,00
250,00
230,00
211,00
324,00
312,00
290,00
270,00
428,00
408,00
373,00
407,00
395,00
373,00
352,00
333,00
517,00
500,00
470,00
441,00
600,00
573,00
524,00
479,00
673,00
646,00
597,00
-
2,52
4,21
7,61
11,00
14,40
2,95
5,08
9,35
13,60
3,66
6,51
12,20
3,73
6,22
11,20
16,20
21,20
4,06
6,88
12,50
18,20
5,00
8,76
16,30
5,34
8,86
15,90
22,90
30,00
6,30
10,80
19,70
28,70
7,10
12,40
22,90
33,50
7,71
13,60
25,40
-
200,00
197,00
191,00
186,00
181,00
176,00
169,00
251,00
246,00
238,00
231,00
224,00
218,00
209,00
333,00
326,00
313,00
302,00
291,00
280,00
293,00
287,00
278,00
269,00
261,00
253,00
242,00
332,00
327,00
317,00
309,00
300,00
292,00
282,00
441,00
433,00
418,00
403,00
390,00
377,00
416,00
410,00
401,00
392,00
383,00
375,00
364,00
529,00
521,00
508,00
496,00
484,00
473,00
457,00
619,00
607,00
586,00
566,00
548,00
530,00
692,00
680,00
659,00
639,00
621,00
603,00
-
2,52
4,21
7,61
11,00
14,40
17,80
22,60
2,95
5,08
9,35
13,60
17,90
22,20
28,10
3,66
6,51
12,20
17,90
23,60
29,30
3,73
6,22
11,20
16,20
21,20
26,20
33,20
4,06
6,88
12,50
18,20
23,80
29,50
37,40
5,00
8,76
16,30
23,80
31,30
38,90
5,34
8,86
15,90
22,90
30,00
37,00
46,90
6,30
10,80
19,70
28,70
37,70
46,60
59,20
7,10
12,40
22,90
33,50
44,10
54,60
7,71
13,60
25,40
37,20
48,90
60,70
-
203,00
201,00
199,00
197,00
196,00
194,00
191,00
254,00
253,00
250,00
247,00
244,00
242,00
239,00
338,00
336,00
331,00
327,00
323,00
319,00
313,00
297,00
295,00
291,00
288,00
285,00
282,00
278,00
336,00
334,00
331,00
327,00
324,00
321,00
317,00
448,00
445,00
439,00
434,00
429,00
424,00
418,00
420,00
418,00
414,00
411,00
408,00
405,00
401,00
534,00
532,00
527,00
522,00
518,00
514,00
508,00
628,00
624,00
616,00
609,00
602,00
595,00
586,00
701,00
697,00
689,00
682,00
675,00
668,00
659,00
2,52
4,21
7,61
11,00
14,40
17,80
22,60
2,95
5,08
9,35
13,60
17,90
22,20
28,10
3,66
6,51
12,20
17,90
23,60
29,30
37,20
3,73
6,22
11,20
16,20
21,20
26,20
33,20
4,06
6,88
12,50
18,20
23,80
29,50
37,40
5,00
8,76
16,30
23,80
31,30
38,90
49,40
5,34
8,86
15,90
22,90
30,00
37,00
46,90
6,30
10,80
19,70
28,70
37,70
46,60
59,20
7,10
12,40
22,90
33,50
44,10
54,60
69,40
7,71
13,60
25,40
37,20
48,90
60,70
77,20
v = 6 mm2/s
Q
l/min
399,00
392,00
378,00
366,00
355,00
343,00
328,00
500,00
490,00
472,00
455,00
439,00
424,00
663,00
647,00
618,00
592,00
566,00
583,00
571,00
550,00
529,00
510,00
492,00
662,00
650,00
629,00
608,00
589,00
571,00
879,00
860,00
825,00
793,00
762,00
830,00
817,00
795,00
775,00
755,00
736,00
711,00
1055,00
1038,00
1007,00
979,00
953,00
927,00
-
v = 40 mm2/s
P
kW
Q
l/min
P
kW
6,66
10,10
16,90
23,70
30,50
37,30
46,80
7,53
11,80
20,30
28,90
37,40
46,00
8,95
14,60
26,00
37,40
48,80
9,94
14,90
24,90
34,90
44,80
54,80
10,60
16,20
27,50
38,80
50,10
61,40
12,50
20,00
35,10
50,10
65,20
14,30
21,40
35,50
49,50
63,60
77,70
97,40
16,20
25,20
43,10
61,10
79,00
96,90
-
404,00
401,00
395,00
390,00
385,00
380,00
373,00
507,00
502,00
495,00
487,00
480,00
474,00
465,00
674,00
667,00
655,00
643,00
632,00
621,00
607,00
592,00
587,00
577,00
568,00
560,00
552,00
541,00
671,00
666,00
656,00
647,00
639,00
631,00
620,00
893,00
884,00
869,00
855,00
842,00
829,00
812,00
838,00
833,00
823,00
814,00
806,00
798,00
787,00
1066,00
1059,00
1046,00
1033,00
1022,00
1010,00
995,00
6,66
10,10
16,90
23,70
30,50
37,30
46,80
7,53
11,80
20,30
28,90
37,40
46,00
57,90
8,95
14,60
26,00
37,40
48,80
60,20
76,10
9,94
14,90
24,90
34,90
44,80
54,80
68,80
10,60
16,20
27,50
38,80
50,10
61,40
77,20
12,50
20,00
35,10
50,10
65,20
80,20
101,00
14,30
21,40
35,50
49,50
63,60
77,70
97,40
16,20
25,20
43,10
61,10
79,00
96,90
122,00
v = 380 mm2/s
Q
l/min
406,00
405,00
403,00
401,00
399,00
398,00
395,00
510,00
509,00
506,00
503,00
501,00
498,00
495,00
680,00
677,00
673,00
668,00
664,00
660,00
655,00
596,00
594,00
590,00
587,00
584,00
581,00
577,00
675,00
673,00
669,00
666,00
663,00
660,00
656,00
899,00
896,00
891,00
885,00
880,00
876,00
869,00
843,00
841,00
837,00
834,00
831,00
827,00
823,00
1072,00
1070,00
1065,00
1060,00
1056,00
1052,00
1046,00
P
kW
6,66
10,10
16,90
23,70
30,50
37,30
46,80
7,53
11,80
20,30
28,90
37,40
46,00
57,90
8,95
14,60
26,00
37,40
48,80
60,20
76,10
9,94
14,90
24,90
34,90
44,80
54,80
68,80
10,60
16,20
27,50
38,80
50,10
61,40
77,20
12,50
20,00
35,10
50,10
65,20
80,20
101,00
14,30
21,40
35,50
49,50
63,60
77,70
97,40
16,20
25,20
43,10
61,10
79,00
96,90
122,00
The performance datas are valid for all designs. For exact deliveries as a function of the viscosity of the fluid to be pumped (also for other viscosities than
those mentioned above) and the pump speed, please refer to the individual characteristics.
VM 617 GB/11.98
4005
11
ALLWEILER
Series SN...ER..
Pump
size
Delivery
pressure
SN...
p bar
660-40
660-44
660-46
660-51
660-54
940-42
940-46
940-50
940-54
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
n = 1450 1/min
v = 6 mm 2 /s
Q
l/min
632,00
615,00
585,00
558,00
714,00
692,00
651,00
614,00
775,00
752,00
711,00
674,00
908,00
872,00
807,00
1039,00
1003,00
937,00
916,00
887,00
834,00
786,00
1107,00
1077,00
1025,00
976,00
1244,00
1197,00
1113,00
1466,00
1419,00
1335,00
-
P
kW
8,06
13,50
24,40
35,20
8,81
15,00
27,40
39,80
9,31
16,00
29,40
42,80
10,60
18,50
34,40
11,70
20,70
38,70
11,70
19,60
35,50
51,40
13,30
22,80
41,90
60,90
14,60
25,50
47,20
16,50
29,20
54,60
-
v = 40 mm2/s
Q
l/min
643,00
636,00
623,00
611,00
600,00
589,00
574,00
730,00
721,00
703,00
686,00
671,00
656,00
791,00
781,00
763,00
747,00
731,00
716,00
934,00
918,00
890,00
863,00
838,00
1064,00
1048,00
1020,00
994,00
969,00
937,00
924,00
901,00
880,00
860,00
840,00
814,00
1127,00
1114,00
1092,00
1070,00
1050,00
1031,00
1276,00
1256,00
1219,00
1185,00
1153,00
1122,00
1499,00
1478,00
1442,00
1408,00
1375,00
-
P
kW
8,06
13,50
24,40
35,20
46,10
57,00
72,20
8,81
15,00
27,40
39,80
52,10
64,50
9,31
16,00
29,40
42,80
56,10
69,50
10,60
18,50
34,40
50,30
66,20
11,70
20,70
38,70
56,80
74,90
11,70
19,60
35,50
51,40
67,30
83,10
105,00
13,30
22,80
41,90
60,90
80,00
99,00
14,60
25,50
47,20
68,80
90,50
112,00
16,50
29,20
54,60
80,00
105,00
-
n =2900 1/min
v = 380 mm2/s
Q
l/min
649,00
646,00
641,00
637,00
633,00
629,00
623,00
738,00
734,00
728,00
722,00
716,00
710,00
703,00
798,00
795,00
788,00
782,00
776,00
771,00
763,00
946,00
940,00
930,00
920,00
911,00
902,00
890,00
1077,00
1071,00
1060,00
1050,00
1041,00
1032,00
1020,00
947,00
942,00
933,00
926,00
918,00
911,00
901,00
1137,00
1132,00
1124,00
1116,00
1109,00
1101,00
1092,00
1292,00
1285,00
1271,00
1259,00
1247,00
1235,00
1220,00
1515,00
1507,00
1494,00
1481,00
1469,00
1458,00
1442,00
P
kW
8,06
13,50
24,40
35,20
46,10
57,00
72,20
8,81
15,00
27,40
39,80
52,10
64,50
81,80
9,31
16,00
29,40
42,80
56,10
69,50
88,30
10,60
18,50
34,40
50,30
66,20
82,10
104,00
11,70
20,70
38,70
56,80
74,90
92,90
118,00
11,70
19,60
35,50
51,40
67,30
83,10
105,00
13,30
22,80
41,90
60,90
80,00
99,00
126,00
14,60
25,50
47,20
68,80
90,50
112,00
143,00
16,50
29,20
54,60
80,00
105,00
131,00
166,00
v = 6 mm2/s
Q
l/min
1284,00
1267,00
1238,00
1210,00
1184,00
1159,00
1457,00
1435,00
1394,00
1356,00
1320,00
-
P
kW
21,40
32,20
54,00
75,70
97,50
119,00
22,90
35,20
60,00
84,70
110,00
-
v = 40 mm2/s
Q
l/min
1296,00
1288,00
1275,00
1263,00
1252,00
1241,00
1226,00
1473,00
1463,00
1445,00
1429,00
1413,00
1398,00
1378,00
P
kW
21,40
32,20
54,00
75,70
97,50
119,00
150,00
22,90
35,20
60,00
84,70
110,00
134,00
169,00
v = 380 mm2/s
Q
l/min
1301,00
1299,00
1294,00
1289,00
1285,00
1281,00
1276,00
1481,00
1477,00
1470,00
1464,00
1459,00
1453,00
1445,00
P
kW
21,40
32,20
54,00
75,70
97,50
119,00
150,00
22,90
35,20
60,00
84,70
110,00
134,00
169,00
The performance datas are valid for all designs. For exact deliveries as a function of the viscosity of the fluid to be pumped (also for other
viscosities than those mentioned above) and the pump speed, please refer to the individual characteristics.
12
VM 617 GB/11.98
4006
ALLWEILER
Series SN...ER..
Pump
size
Delivery
pressure
SN...
p bar
1300-38
1300-42
1300-44
1300-46
1300-54
1700-42
1700-46
2200-42
2200-46
2900-40
3600-46
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
5
10
20
30
40
50
64
n = 1750 1/min
v = 6 mm 2 /s
v = 40 mm2/s
v = 380 mm2/s
Q
l/min
P
kW
Q
l/min
P
kW
Q
l/min
1096,00
1069,00
1020,00
976,00
933,00
1303,00
1266,00
1200,00
1139,00
1397,00
1360,00
1294,00
1233,00
1522,00
1486,00
1419,00
1358,00
2012,00
1953,00
1848,00
1746,00
1700,00
1619,00
1543,00
2030,00
1985,00
1903,00
1828,00
2280,00
2225,00
2127,00
2035,00
2641,00
2587,00
2488,00
2397,00
3362,00
3285,00
3147,00
3020,00
4207,00
4131,00
3993,00
-
14,50
24,00
42,80
61,60
80,40
16,40
27,60
50,10
72,60
17,20
29,20
53,20
77,30
18,20
31,30
57,40
83,50
22,50
39,90
74,70
22,00
37,00
67,00
97,10
24,40
41,70
76,50
111,00
28,80
48,40
87,50
127,00
31,80
54,40
99,50
145,00
42,80
71,60
129,00
187,00
49,80
85,60
157,00
-
1114,00
1103,00
1082,00
1062,00
1044,00
1026,00
1002,00
1329,00
1312,00
1284,00
1257,00
1232,00
1207,00
1174,00
1423,00
1407,00
1378,00
1351,00
1326,00
1301,00
1548,00
1532,00
1503,00
1476,00
1451,00
1427,00
2053,00
2028,00
1982,00
1939,00
1898,00
1778,00
1758,00
1723,00
1690,00
1658,00
1628,00
1588,00
2062,00
2043,00
2007,00
1974,00
1943,00
1913,00
2318,00
2295,00
2252,00
2212,00
2174,00
2138,00
2089,00
2680,00
2656,00
2613,00
2573,00
2535,00
2499,00
3416,00
3382,00
3322,00
3267,00
3214,00
3163,00
4261,00
4228,00
4167,00
4112,00
4059,00
-
14,50
24,00
42,80
61,60
80,40
99,20
1 26,00
16,40
27,60
50,10
72,60
95,00
118,00
149,00
17,20
29,20
53,20
77,30
101,00
125,00
18,20
31,30
57,40
83,50
110,00
136,00
22,50
39,90
74,70
109,00
144,00
22,00
37,00
67,00
97,10
127,00
157,00
199,00
24,40
41,70
76,50
111,00
146,00
181,00
28,80
48,40
87,50
127,00
166,00
205,00
260,00
31,80
54,40
99,50
145,00
190,00
235,00
42,80
71,60
129,00
187,00
244,00
302,00
49,80
85,60
157,00
229,00
301,00
-
1124,00
1119,00
1111,00
1104,00
1097,00
1091,00
1082,00
1341,00
1335,00
1325,00
1315,00
1305,00
1296,00
1284,00
1435,00
1429,00
1419,00
1409,00
1399,00
1390,00
1378,00
1561,00
1555,00
1544,00
1534,00
1525,00
1516,00
1504,00
2074,00
2064,00
2047,00
2031,00
2016,00
2002,00
1982,00
1793,00
1786,00
1773,00
1761,00
1749,00
1738,00
1723,00
2078,00
2071,00
2057,00
2045,00
2034,00
2023,00
2008,00
2337,00
2328,00
2313,00
2298,00
2284,00
2270,00
2252,00
2699,00
2690,00
2674,00
2659,00
2645,00
2632,00
2614,00
3442,00
3430,00
3408,00
3387,00
3367,00
3349,00
3323,00
4287,00
4275,00
4253,00
4232,00
4213,00
4194,00
4168,00
P
kW
14,50
24,00
42,80
61,60
80,40
99,20
126,00
16,40
27,60
50,10
72,60
95,00
118,00
149,00
17,20
29,20
53,20
77,30
101,00
125,00
159,00
18,20
31,30
57,40
83,50
110,00
136,00
172,00
22,50
39,90
74,70
109,00
144,00
179,00
228,00
22,00
37,00
67,00
97,10
127,00
157,00
199,00
24,40
41,70
76,50
111,00
146,00
181,00
230,00
28,80
48,40
87,50
127,00
166,00
205,00
260,00
31,80
54,40
99,50
145,00
190,00
235,00
298,00
42,80
71,60
129,00
187,00
244,00
302,00
383,00
49,80
85,60
157,00
229,00
301,00
372,00
473,00
VM 617 GB/11.98
4007
13
ALLWEILER
Series SNH...ER..
Sectional drawing
SNH... - horizontal foot mounted pump, internal ball bearing, with mechanical seal, design U...*)
internal ball bearing, with stuffing box, design U2 *) **)
internal ball bearing, with shaft sealing rings, design U3 *) **)
Design U... with mechanical seal
Section A-B
Section E-F
Design U2
Section C-D
Design U3
Part No.
1
2c
3
4
5
6
7
8c
9
12 c
13 c
19
20
21 c
22 c
23 c
24 c
25 c
26 c
27 c
28 c
32 c
34 c
35
36
38
39
40
14
Denomination
pump casing
pump casing insert
pump cover, drive side
pump cover, non-drive side
shaft sealing housing
pump foot
pump casing cover
balance bush
seal cover
gland (only with design U2)
driving spindle
idler spindle
valve spring
balance pipe
gasket
gasket
O-ring
gasket
joint washer
joint washer
joint washer
joint washer
gland packing ring
groove ball bearing
circlip
supporting washer
stud bolt
hexagon nut
ball valve
Part-No.
41
42
44
46
47
48
49
51
52
53
54
55
57
79
80
81
83 c
107 c
108
109
110
Denomination
key
spring dowel
lock washer
screw plug
screw plug
stop screw
screw plug (only with design U3)
screw plug
socket head cap screw
hexagon screw
spacer ring
supporting washer
support ring (only with design U2)
mechanical seal
shaft seal ring
supporting ring
spacer bush
hexagon screw

at pump size 940 to 2200
c spare parts
VM 617 GB/03.01
1000
ALLWEILER
Series SNH...ER..
Sectional drawing
SNH... - horizontal foot mounted pump, external ball bearing, with mechanical seal, design D...*) **) and E...*)
external ball bearing, with stuffing box, design KA2 *) **)
Design D...
Section A-B
Section C-D
Section E-F
Design E...
bearing with grease nipple
Design KA2 (pump size 80 to 2200)

Part-No.
1
2c
3
4
5
6
7
8 c
9
10
12 c
13 c
16
19
20
21 c
22 c
23 c
24 c
25 c
26 c
27 c
28 c
32 c
34 c
35
36
37
Denomination
pump casing
pump casing insert
bearing housing
pump foot
pump casing cover
balance bush
gland
greasing chamber disc
driving spindle
idler spindle
spacer bush
labyrinth ring (only with design E)
valve spring
balance pipe
gasket
gasket
O-ring
gasket
joint washer
joint washer
joint washer
joint washer
gland packing ring
groove ball bearing
circhp
supporting washer
circlip
VM 617 GB/03.01
1001
Part-No. Denomination
38
stud bolt (with pump size 40 to 210)
eyelet bolt (with pump size 280 to 2200)
39
hexagon nut
40
ball valve
41
key
42
spring dowel
44
lock washer
46
screw plug
47
screw plug
48
stop screw
49
screw plug
50
lubricating nipple
51
52
53
54
55
57
hexagon screw
80
spacer ring
81
support ring
82
spring dowel
83 c mechanical seal
* Up to pump size 210 with stud

bolt, part No. 38. Pump size 280
to 2200 with eyelet bolt, part No.
38, and spring dowel, part No. 82
(not shown in the drawing)
Design KA2
at pump size 40
c spare parts
15
ALLWEILER
Series SNF...ER..
Sectional drawing
SNF... - flange mounted pump, internal ball bearing, with mechanical seal, design U... *)
Section A-B
Section E-F
Section C-D
Design U2
Design U3
Part No.
1
2c
3
4
5
7
8c
9
12 c
13 c
19
20
21 c
22 c
23 c
24 c
25 c
26 c
27 c
28 c
32 c
34 c
35
36
38
39
40
41
16
Denomination
pump casing
pump casing insert
pump casing cover
balance bush
seal cover
driving spindle
idler spindle
valve spring
balance pipe
gasket
gasket
O-ring
gasket
joint washer
joint washer
joint washer
joint washer
gland packing ring
groove ball bearing
circlip
supporting washer
stud bolt
hexagon nut
ball valve
key
Part No.
42
46
47
48
49
51
52
53
54
55
79
80
81
83 c
107 c
108
109
110
Denomination
spring dowel
screw plug
screw plug
stop screw
Screw plug (only with design U3)
screw plug
spacer ring
supporting washer
Support ring (only with design U2)
mechanical seal
shaft seal ring
supporting ring
spacer bush
hexagon screw

c spare parts
VM 617 GB/03.01
1000
ALLWEILER
Series SNF...ER..
Sectional drawing
SNF... - flange mounted pump, external ball bearing, with mechanical seal, design D... *) **) and E... *)
Design D...
Section A-B
Section E-F
Design E...
Section C-D
Part No.
1
2c
3
4
5
7
8c
9
10
12 c
13 c
16
19
20
21 c
22 c
23 c
24 c
25 c
26 c
27 c
28 c
32 c
34 c
35
36
37
Denomination
pump casing
pump casing insert
bearing housing
pump casing cover
balance bush
gland
driving spindle
idler spindle
spacer bush
valve spring
balance pipe
gasket
gasket
O-ring
gasket
joint washer
joint washer
joint washer
joint washer
gland packing ring
groove ball bearing
circlip
supporting washer
circlip
Part No.
38
39
40
41
42
46
47
48
49
50
51
52
53
54
55
80
81
82
83 c
Denomination
hexagon nut
ball valve
key
spring dowel
screw plug
screw plug
stop screw
screw plug
lubricating nipple
spacer ring
support ring
spring dowel
mechanical seal
* Up to pump size 210 with stud bolt, part

No. 38. Pump size 280 to 2200 with
eyelet bolt, part No. 38, and spring dowel,
part No. 82 (not shown in the drawing)
Design KA2 at pump size 40
c spare parts
VM 617 GB/03.01
1003
17
ALLWEILER
Series SNS...ER..
Sectional drawing
SNS... - vertical pedestal mounted pump, internal ball bearing, with mechanical seal, design U... *)
Design U2
Section E-F
*) shown to pump size 2200

**) available to pump size 2200
Design U3
Section C-D
Section A-B

Part No.
1
2c
3
4
5
7
8c
9
12 c
13 c
19
20
21 c
22 c
23 c
24 c
25 c
18
Denomination
pump casing
pump casing insert
round pump foot
pump casing cover
balance bush
seal cover
driving spindle
idler spindle
valve spring
balance pipe
gasket
gasket
O-ring
gasket
joint washer
Part No.
26 c
27 c
28 c
32 c
34 c
35
36
38
39
40
41
42
45
46
47
48
49
Denomination
joint washer
joint washer
joint washer
gland packing ring
groove ball bearing
circlip
supporting washer
stud bolt
hexagon nut
ball valve
key
spring dowel
lock washer
screw plug
screw plug
stop screw
screw plug
Part No.
51
52
53
54
55
79
80
81
83 c
107 c
108
109
110
Denomination
spacer ring
supporting washer
mechanical seal
shaft seal ring
supporting ring
spacer bush
hexagon screw
c spare parts
VM 617 GB/11.98
1004
ALLWEILER
Series SNS...ER..
Sectional drawing
SNS... - vertical pedestal mounted pump, external ball bearing, with mechanical seal, design ID... *) **) and E... *)
Design D...
Design E..
Section E-F


Section C-D
Section A-B

NO. 38. Pump size 280 to 2200 with eyelet
bolt, part No. 38, and spring dowel, part
No. 82 (not shown in the drawing)
Design KA2
at pump size 40
Part No.
1
2c
3
4
5
7
8c
9
10
12 c
13 c
16
19
20
21 c
22 c
23 c
Denomination
pump casing
pump casing insert
round pump foot
bearing housing
pump casing cover
balance bush
gland
driving spindle
idler spindle
spacer bush
valve spring
balance pipe
gasket
gasket
O-ring
VM 617 GB/11.98
1005
Part No.
24 c
25 c
26 c
27 c
28 c
32 c
34 c
35
36
37
38
39
40
41
42
45
46
Denomination
gasket
joint washer
joint washer
joint washer
joint washer
gland packing ring
groove ball bearing
circlip
supporting washer
circlip
hexagon nut
ball valve
key
spring dowel
lock washer
screw plug
Part No.
47
48
49
50
51
52
53
54
55
80
81
82
83 c
Denomination
screw plug
stop screw
screw plug
lubricating nipple
spacer ring
support ring
spring dowel
mechanical seal
c spare parts
19
ALLWEILER
Series SNE/SNEF...ER..
Sectional drawing
SNE..., SNEF... - cartridge unit pump, internal ball bearing, with mechanical seal, design U... *)
Section E-F
Section A-B
Design U2
Section C-D
Design U3
Part No.
2c
3
5
8c
9
12 c
13 c
19
20
21 c
22 c
24 c
27 c
28 c
32 c
34 c
35
36
38
39
40
41
42
48
49
51
54
20
Denomination
pump casing insert
balance bush
seal cover
driving spindle
idler spindle
valve spring
balance pipe
gasket
gasket
gasket
joint washer
joint washer
gland packing ring
groove ball bearing
circlip
supporting washer
stud bolt
hexagon nut
ball valve
key
spring dowel
stop screw
screw plug
Part No.
55
79
80
81
83 c
107 c
108
109
110
Denomination
spacer ring
supporting washer
mechanical seal
shaft seal ring
supporting ring
spacer bush
hexagon screw
Design U3
Design U... with mechanical seal at

pump size 940 to 2200
c spare sparts
VM 617 GB/11.98
1006
ALLWEILER
Sectional drawing
SNE..., SNEF... - cartridge unit pump, external ball bearing, with mechanical seal, design D... *) **) and E... *)
Design D..
Section A-B
Section E-F
Series SNE
Series SNEF
Design E...
Section C-D
Part No.
2c
3
5
8c
9
10
12 c
13 c
16
19
20
21 c
22 c
24 c
27 c
28 c
32 c
34 c
35
36
37
38
39
40
41
42
48
Denomination
pump casing insert
bearing housing
balance bush
gland
driving spindle
idler spindle
spacer bush
labyrinth ring (only with design e)
valve spring
balance pipe
gasket
gasket
gasket
joint washer
joint washer
gland packing ring
groove ball bearing
circlip
supporting washer
circlip
hexagon nut
ball valve
key
spring dowel
stop screw
VM 617 GB/11.98
1007
Part No.
49
50
51
54
55
80
81
82
83 c
Denomination
screw plug
lubricating nipple
spacer ring
support ring
spring dowel
mechanical seal
No. 38. Pump size 280 to 2200 with eyelet
c spare parts
21
ALLWEILER
Series SNGH...ER..
Sectional drawing
SNGH... - horizontal foot mounted pump, internal ball bearing, with mechanical seal, design U...
internal ball bearing, with stuffing box, design U2
internal ball bearing, with shaft sealing rings, design U3
Section A-B
Section E-F
Section C-D
Design U2
Design U3
Part-No.
1
2c
3
4
5
6
8c
9
12 c
13 c
19
20
21 c
22 c
23 c
24 c
25 c
26 c
27 c
28 c
29 c
32 c
34 c
35
36
38
39
40
22
Denomination
pump casing
pump casing insert
pump foot
balance bush
seal cover
driving spindle
idler spindle
valve spring
balance pipe
gasket
gasket
O-ring
gasket
joint washer (with pump size 440 to
1300)
joint washer
joint washer
joint washer
joint washer
gland packing ring
groove ball bearing
circlip
supporting washer
stud bolt
hexagon nut
ball valve
Part-No.
41
42
43
44
46
47
48
49
51
52
54
55
57
79
80
81
83 c
107 c
108
109
110
Denomination
key
spring dowel
screw plug
lock washer
screw plug (with pump size 440 to 1300)
screw plug
stop screw
screw plug
hexagon screw
spacer ring
supporting washer
mechanical seal
shaft seal ring
supporting ring
spacer bush
hexagon screw
Design U... with mechanical seal at

pump size 940 to 1300
c spare parts
VM 617 GB/03.01
1008
ALLWEILER
Series SNGH... ER..

Sectional drawing
SNGH... - horizontal foot mounted pump, external ball bearing, with mechanical seal, design D... and E...
external ball bearing, with stuffing box, design KA2
Design D...
Section A-B
Section E-F
Design E...
Section C-D
Design KA2
Part-No.
1
2c
3
4
5
6
8c
9
10
12 c
13 c
16
19
20
21 c
22 c
23 c
24 c
25 c
26 c
27 c
28 c
29 c
32 c
34 c
35
36
37
Denomination
pump casing
pump casing insert
bearing housing
pump foot
balance bush
gland
driving spindle
idler spindle
spacer bush
labyrinth ring (only with design. E)
valve spring
balance pipe
gasket
gasket
O-ring
gasket
joint washer (with pump size 280 to1300)
joint washer
joint washer
joint washer
joint washer
gland packing ring
groove ball bearing
circlip
supporting washer
circlip
VM 617 GB/03.01
1009
Part-No.
38
39
40
41
42
43
44
46
47
48
49
50
51
52
54
55
57
80
81
82
83 c
Denomination
hexagon nut
ball valve
key
spring dowel
screw plug
lock washer
screw plug
stop screw
screw plug
lubricating nipple
hexagon screw
spacer ring
support ring
spring dowel
mechanical seal
c spare parts
* Up to pump size 210 with stud bolt, part No.

38. Pump size 280 to 1300 with eyelet bolt,
part No. 38, and spring dowel, part No. 82
(not shown in the drawing)
23
23
ALLWEILER
Series SNGF...ER..
Sectional drawing
SNGF... - flange mounted pump, internal ball bearing, with mechanical seal, design U...
Section A-B
Section E-F
Design U2
Section C-D
Design U3
Part No.
1
2c
3
4
5
7
8c
9
12 c
13 c
19
20
21 c
22 c
23 c
24 c
25 c
26 c
27 c
28 c
29 c
32 c
34 c
35
36
38
39
40
24
Denomination
pump casing
pump casing insert
Part No.
41
42
43
46

pump casing cover
balance bush
seal cover
driving spindle
idler spindle
valve spring
balance pipe
gasket
gasket
O-ring
gasket
joint washer (with pump size 440 to 300)
joint washer
joint washer
joint washer
joint washer
gland packing ring
groove ball bearing
circlip
supporting washer
stud bolt
hexagon nut
ball valve
47
48
49
51
52
53
54
55
79
80
81
83 c
107 c
108
109
110
Denomination
key
spring dowel
screw plug
screw plug (with pump size 440 to
1300)
screw plug
stop screw
screw plug
spacer ring
supporting washer
mechanical seal
shaft seal ring
supporting ring
spacer bush
hexagon screw

c spare parts
VM 617 GB/11.98
1010
ALLWEILER
Series SNGF...ER..
Sectional drawing
SNGF... -flange mounted pump, external ball bearing, with mechanical seal, design D... and E....
Design D...
Section A-B
Section E-F
Design E...
Section C-D
Design KA2
Part No.
1
2c
3
4
5
7
8c
9
10
12 c
13 c
16
19
20
21 c
22 c
23 c
24 c
25 c
26 c
27 c
28 c
29 c
32 c
34 c
35
36
37
Denomination
pump casing
pump casing insert
bearing housing
pump casing cover
balance bush
gland
driving spindle
idler spindle
spacer bush
valve spring
balance pipe
gasket
gasket
O-ring
gasket
joint washer
joint washer
joint washer
joint washer
gland packing ring
groove ball bearing
circlip
supporting washer
circlip
VM 617 GB/11.98
1011
Part No.
38
39
40
41
42
43
46
47
48
49
50
51
52
53
54
55
80
81
82
83 c
Denomination
eyelet bolt (with pump size 280 to
hexagon nut
ball valve
key
spring dowel
screw plug
screw plug (with pump size 440 to
screw plug
stop screw
screw plug
lubricating nipple
spacer ring
support ring
spring dowel
mechanical seal

Design KA2 at
pump size 40
c spare parts
25
ALLWEILER
Series SNGS...ER..
Sectional drawing
SNGS... - vertical pedestal mounted pump, internal ball bearing, with mechanical seal, design U...
Design U2

Section E-F
Design U3

Part No.
1
2c
3
4
5
7
8c
9
12 c
13 c
19
20
21 c
22 c
23 c
24 c
25 c
26 c
27 c
26
Denomination
pump casing
pump casing insert
round pump foot
pump casing cover
balance bush
seal cover
driving spindle
idler spindle
valve spring
balance pipe
gasket
gasket
O-ring
gasket
joint washer
joint washer
Part No.
28 c
29 c
32 c
34 c
35
36
38
39
40
41
42
43
45
46
47
48
49
51
52
Denomination
joint washer
joint washer
gland packing ring
groove ball bearing
circlip
supporting washer
stud bolt
hexagon nut
ball valve
key
spring dowel
screw plug
lock washer
screw plug
stop screw
screw plug
Part No.
53
54
55
79
80
81
83 c
107 c
108
109
110
120
121 c
123
124 c
125
127 c
Denomination
spacer ring
supporting washer
Support ring (only with design U2)
mechanical seal
shaft seal ring
supporting ring
spacer bush
hexagon screw
heating chamber (intermediary)
gasket
screw plug
joint washer
joint washer
c spare parts
VM 617 GB/11.98
1012
ALLWEILER
Series SNGS...ER..
Sectional drawing
SNGS... - vertical pedestal mounted pump, external ball bearing, with mechanical seal, design D... and E...
Design D...
Section E-F
Design E..

Design KA2
Design KA2
at pump size 40
Part No.
1
2c
3
4
5
7
8c
9
10
12 c
13 c
16
19
20
21 c
22 c
23 c
24 c
25 c
Denomination
pump casing
pump casing insert
round pump foot
bearing housing
pump casing cover
balance bush
gland
driving spindle
idler spindle
spacer bush
valve spring
balance pipe
gasket
gasket
O-ring
gasket
VM 617 GB/1198 1013
Part No.
26 c
27 c
28 c
29 c
32 c
34 c
35
36
37
38
39
40
41
42
43
45
46
47
48
Denomination
joint washer
joint washer
joint washer
joint washer
gland packing ring
groove ball bearing
circlip
supporting washer
circlip
hexagon nut
ball valve
key
spring dowel
screw plug
lock washer
screw plug
stop screw
Part No.
49
50
51
52
53
54
55
80
81
82
83 c
120
121 c
123
124 c
125
127 c
Denomination
screw plug
lubricating nipple
spacer ring
support ring
spring dowel
mechanical seal
heating chamber (intermediary)
gasket
screw plug
joint washer
joint washer
c spare parts
27
ALLWEILER
Series SNH...ER..
Pump dimensions - not valid for fabricated (welded) design
SNH... - horizontal foot mounted pump, internal ball bearing, with mechanical seal, design U... *)
internal ball bearing, with shaft sealing rings, design U3 *) **) and U4 *) **)
external ball bearing, with mechanical seal, design D... *) **) and E... *)
Branch position: Suction and

delivery branch opposed in one line
(In-line) on centerline of pump. The
sense of flow may be changed
without alteration of sense of
rotation by turning the pump casing
by 180.
Dimensions in mm
Alteration of dimensions reserved
pump
size
40
80
120
210
280
440
660
940
1300
1700
2200
2900/3600
pump dimensions
h
106
118
150
160
190
200
215
225
240
260
265
315
k1
285
327
411
446
531
580
630
690
760
809
885
1030
k2
393
435
503
580
630
716
800
886
965
1060
1136
1322
n2
162
174
207
217
247
257
307
317
382
402
407
467
foot dimensions
o
189
213
265
285
330
350
380
400
430
470
480
560
q
230
275
317
352
390
440
490
555
570
630
715
820
r
130
155
185
205
220
245
270
290
310
350
360
414
a
70
70
140
140
200
200
200
200
300
300
300
340
b
144
144
180
180
300
300
300
300
370
370
370
420
c
10
10
15
15
30
30
30
30
35
35
35
28
e
114
114
190
190
280
280
280
280
380
380
380
400
shaft end
f
170
170
210
210
350
350
350
350
430
430
430
470
i
193
235
246
281
291
340
390
450
420
469
545
660
s
12,0
12,0
14,5
14,5
24,0
24,0
24,0
24,0
24,0
24,0
24,0
26,0
d
19
19
24
28
32
38
42
48
48
55
60
70
I
29
31
45
53
48
50
65
75
85
95
95
130
t
21,5
21,5
27,0
31,0
35,0
41,0
45,0
51,5
51,5
59,0
64,0
74,5
u
6
6
8
8
10
10
12
14
14
16
18
20
max. dimension with by-pass valve, may be smaller each acc. to valve type. For return valves see dimension leaflet VM 617 GB/...2008, page 36
pump
size
delivery flange
suction flange
nom. up to DN 150 - PN16 DIN EN 1092-2, form B nom.
diam.
diam.
connections
DNS
g1
y1
z1
DNd
g2
y2
z2
g2
y2
z2
B1/B2
pressure
gauge
E3/E4 M1/M2
32
65
65
80
100
125
125
150
150
200
200
250
140
185
185
200
220
250
250
285
285
340
340
395
100
145
145
160
180
210
210
240
240
295
295
350
19
19
19
19
19
19
19
23
23
23
23
23
100
120
130
150
165
180
195
205
220
240
250
300
18
20
20
22
24
26
26
26
26
26
26
28
4
4
4
8
8
8
8
8
8
8
8
12
25
50
50
65
80
100
100
125
125
150
150
200
115
165
165
185
200
235
235
270
270
300
300
375
85
125
125
145
160
190
190
220
220
250
250
320
14
19
19
19
19
23
23
28
28
28
28
31
100
120
130
150
165
180
195
205
220
240
250
300
18
22
22
24
26
28
28
30
30
34
34
40
4
4
4
8
8
8
8
8
8
8
8
12
140
180
180
205
215
250
250
295
295
345
345
-
100
135
135
160
170
200
200
240
240
280
280
-
18
22
22
22
22
26
26
30
30
33
33
-
106
124
134
152
167
182
197
209
224
242
252
-
24
26
26
26
28
30
30
34
34
36
36
-
4
4
4
8
8
8
8
8
8
8
8
-
G
6
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
PN40 DIN EN 1092-2, form B
drainage
PN64 DIN 2546, form B
from DN200 - PN10 DIIN EN 1092-2, form B
40
80
120
210
280
440
660
940
1300
1700
2200
2900/3600
venting
G
G
G
G
G
G
G
G
G
G
G
G
only possible with pump casing in GGG-40 (surplus price).
28
VM 617 GB/1198
2000
ALLWEILER
Series SNF...ER..

SNF... - flange mounted pump, internal ball bearing, with mechanical seal, design U... *)

delivery branch opposed in one
line (In-line) on centerline of
pump. The sense of flow may
be changed without alteration of
sense of rotation by turning the
pump casing by 180.
Dimensions in mm
pump
size
k2
40
393
80
435
120
503
210
580
280
630
440
716
660
800
940
886
1300
965
1700
1060
2200
1136
2900/3600 1322
pump dimensions
n2
o1
q
162
174
207
217
247
257
307
317
382
402
407
467
83
95
115
125
140
150
165
175
190
210
215
245
230
275
317
352
390
440
490
555
570
630
715
820
a1
b1
c1
130
155
185
205
220
245
270
290
310
350
360
414
190
230
260
290
310
360
380
400
410
480
480
560
130
155
185
205
220
250
270
290
310
350
360
450
130
153
163
172
175
208
227
241
259
265
267
287
c3
e1
130
153
175
198
209
234
259
287
307
335
355
400
160
190
220
250
260
310
320
350
360
420
420
500
flange cover
f1
f2
20
21
23
23
27
27
27
31
31
35
35
33
100
106
122
127
146
158
173
175
181
192
198
263
shaft end
i1
s1
y3
y4
z3
130
138
168
181
195
209
239
251
267
288
294
394
13,5
17,5
17,5
17,5
22,0
26,0
26,0
22,0
22,0
22,0
22,0
26,0
14,5
16,5
18,0
20,5
21,5
25,0
25,0
28,0
28,0
28,0
30,0
30,0
5,0
6,0
6,0
5,5
6,0
6,0
6,0
6,0
6,0
6,0
10
6,0
4
4
4
4
4
4
4
8
8
8
8
8
19
19
24
28
32
38
42
48
48
55
60
70
29
31
45
53
48
50
65
75
85
95
95
130
21,5
21,5
27,0
31,0
35,0
41,0
45,0
51,5
51,5
59,0
64,0
74,5
6
6
8
8
10
10
12
14
14
16
18
20
Space to be kept free for assembling.
pump
size
40
80
120
210
280
440
660
940
1300
1700
2200
2900/3600
suction flange
delivery flange
nom. up to DN 150 - PN16 DIN EN 1092-2, form B nom.

diam. from DN 200 - PN10 DIN EN 1092-2, form B diam.
connections
drain- vent- presage
ing
sure
gauge
DNS
g1
y1
z1
DNd
g2
y2
z2
g2
y2
z2
B1/B2 E3/E4 M1/M2
32
65
65
80
100
125
125
150
150
200
200
250
140
185
185
200
220
250
250
285
285
340
340
395
100
145
145
160
180
210
210
240
240
295
295
350
19
19
19
19
19
19
19
23
23
23
23
23
100
120
130
150
165
180
195
205
220
240
250
300
18
20
20
22
24
26
26
26
26
26
26
28
4
4
4
8
8
8
8
8
8
8
8
12
25
50
50
65
80
100
100
125
125
150
150
200
115
165
165
185
200
235
235
270
270
300
300
375
85
125
125
145
160
190
190
220
220
250
250
320
14
19
19
19
19
23
23
28
28
28
28
31
100
120
130
150
165
180
195
205
220
240
250
300
18
22
22
24
26
28
28
30
30
34
34
40
4
4
4
8
8
8
8
8
8
8
8
12
140
180
180
205
215
250
250
295
295
345
345
-
100
135
135
160
170
200
200
240
240
280
280
-
18
22
22
22
22
26
26
30
30
33
33
-
106
124
134
152
167
182
197
209
224
242
252
-
24
26
26
26
28
30
30
34
34
36
36
-
4
4
4
8
8
8
8
8
8
8
8
-
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
VM 617 GB/11.98
2001
29
ALLWEILER
Series SNS...ER..

SNS... - vertical pedestal mounted pump, internal ball bearing, with mechanical seal, design U... *)
delivery branch opposed in
one line (In-line) on centerline
of pump. The sense of flow
may be changed without
alteration of sense of rotation
by turning the pump casing by
180.
shaft end all

designs
Sense of rotation:
clockwise seen from
drive side
IEC
size
Standard motors
k5
IEC
k5
appr. size appr.
71
80
240
275
90 S 305
90 L 330
100 L 365
112 M 380
132 S 445
132 M 485
160 M 585
160 L 630
pump dimensions
pump
size
40
80
120
210
280
440
660
940
1300
1700
2200
2900/3600
k6
390,5
464,0
521,5
582,5
741,0
790,0
840,0
925,0
1020
1096
1165
1400
n2
162
174
207
217
247
257
307
317
382
402
407
467
flange cover
o1
83
95
115
125
140
150
165
175
190
210
215
263
q5
160
189
205
230
350
350
350
370
450
466
450
580
a1
190
230
260
290
310
360
380
400
410
480
480
560
b1
130
155
185
205
220
250
270
290
310
350
360
450
c1
130
153
163
172
175
208
227
241
259
265
267
287
c3
130
153
175
198
209
234
259
287
307
335
355
400
e1
160
190
220
250
260
310
320
350
360
420
420
500
max. dimension with by-pass valve, may be 'smaller each acc. to valve type.
40
80
120
210
280
440
660
940
1300
1700
2200
2900/3600
f2
100
106
122
127
146
158
173
175
181
192
198
263
foot dimensions
i1
130
138
168
181
195
209
239
251
267
288
294
394
s1
13,5
17,5
17,5
17,5
22,0
26,0
26,0
22,0
22,0
22,0
22,0
26,0
y3
14,5
16,5
18,0
20,5
21,5
25,0
25,0
28,0
28,0
28,0
30,0
40,0
y4
5,0
6,0
6,0
5,5
6,0
6,0
6,0
6,0
6,0
6,0
10
7,0
z3
4
4
4
4
4
4
4
8
8
8
8
8
a2
250
280
320
340
400
420
480
510
560
600
620
800
c2
22
23
25
25
30
35
35
40
35
35
40
60
e2
220
240
280
300
360
380
440
460
500
540
560
700
s2
14
18
18
18
18
18
18
18
23
23
23
30
650
690
735
810
835
940
1000
1050
1140
1200
shaft end
z4
4
6
6
6
8
8
8
8
8
8
8
8
d
19
19
24
28
32
38
42
48
48
55
60
70
I
29
31
45
53
48
50
65
75
85
95
95
130
t
21,5
21,5
27,0
31,0
35,0
41,0
45,0
51,5
51,5
59,0
64,0
74,5
u
6
6
8
8
10
10
12
14
14
16
18
20
at SNS 120 with valve DS 38 + DVI38: dimension k 6 = 608,0 and q 5 = 291,5; screw arrangement at foot = IV
at SNS 210 with valve DS 38:
dimension k 6 = 651,0 and q 5 - 298,5; screw arrangement at foot = IV
For return valves see dimension leafiet VM 617 GB/...2008, page 36

pump
size
f1
20
21
23
23
27
27
27
31
31
35
35
33
180 M
180 L
200 L
225 S
225 M
250 M
280 S
280 M
315 S
315 M
The deviating dimensions as well as the screws of the foot are caused by the necessary intermediary.
suction flange
delivery flange
nom. up to DN 150-PN16 DIN EN 1092-2, form B nom.

diam. from DN 200- PN10 DIN EN 1092-2, form B
diam.
drainage
connections
ventpresing
sure
gauge
DNS
g1
y1
z1
DNd
g2
y2
z2
g2
y2
z2
B1/B3 E2/E4 M1/M2
32
65
65
80
100
125
125
150
150
200
200
250
140
185
185
200
220
250
250
285
285
340
340
395
100
145
145
160
180
210
210
240
240
295
295
350
19
19
19
19
19
19
19
23
23
23
23
23
100
120
130
150
165
180
195
205
220
240
250
300
18
20
20
22
24
26
26
26
26
26
26
28
4
4
4
8
8
8
8
8
8
8
8
12
25
50
50
65
80
100
100
125
125
150
150
200
115
165
165
185
200
235
235
270
270
300
300
375
85
125
125
145
160
190
190
220
220
250
250
320
14
19
19
19
19
23
23
28
28
28
28
31
100
120
130
150
165
180
195
205
220
240
250
300
18
22
22
24
26
28
28
30
30
34
34
40
4
4
4
8
8
8
8
8
8
8
8
12
140
180
180
205
215
250
250
295
295
345
345
-
100
135
135
160
170
200
200
240
240
280
280
-
18
22
22
22
22
26
26
30
30
33
33
-
106
124
134
152
167
182
197
209
224
242
252
-
24
26
26
26
28
30
30
34
34
36
36
-
4
4
4
8
8
8
8
8
8
8
8
-
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
leakage
oil
T
G
G
G
G
G
G
G
G
G
G
G
G
30
VM 617 GB/11 98
2002
ALLWEILER

SNE..., SNEF... - cartridge unit pump, internal ball bearing, with mechanical seal, design U... *)
internal ball bearing, with shaft sealing rings, design U3 '*) **) and U4 *) **)
design
U2, U3, U4
design
D..., E...
design
KA2
view X
only with design U4
pump size 40 to 440
shaft end
all desigins
*) shown to pump size 2200 **)

available to pump size 2200
SNEF
Sense of rotation:
clockwise seen
from drive side
z3/z5 = No. of holes

pump
size
40
80
120
210
280
440
660
940
1300
1700
2200
2900/3600
Dimensions in mm
pump dimensions
mounting flange
i2
r1
r2
r3
y6
y7
a3
e3
s3
s4
yc
z5
145,0
155,0
186,5
207,0
217,0
235,0
265,0
280,0
296,0
317,0
325,0
435,0
375
414
480
555
600
673
770
854
932
1022
1095
1255
81
100
108
126
132
150
168
188
210
232
252
292
85
105
120
140
147
171
191
214
235
261
280
319
86
106
121
141
148
172
192
215
236
262
281
320
66
95
105
113
145
173
193
240
225
267
343
335
12
17
17
18
20
25
28
30
30
30
36
40
12
13
16
16
21
20
20
20
31
30
30
30
128
152
182
203
217
243
266
290
310
348
360
410
105
130
152
175
180
205
230
250
272
300
320
365
12,0
12,0
14,5
14,5
18,5
18,5
18,5
24,0
24,0
24,0
24,0
24,0
M 10
M 10
M 12
M 12
M 16
M 16
M 16
M 20
M 20
M 20
M 20
M 20
14,0
16,5
19,0
21,0
22,5
25,0
28,0
31,0
34,0
34,0
40,0
47,0
6
6
6
6
6
8
8
8
8
8
12
12
stated dimensions without gasket
pump
size
40
80
120
210
280
440
660
940
1300
1700
2200
2900/3600
a1
190
230
260
290
310
360
380
400
410
480
480
560
b1
130
155
185
205
220
250
270
290
310
350
360
450
d
c1
130
153
163
172
175
208
227
241
259
265
267
287
d
c3
130
153
175
198
209
234
259
287
307
335
355
400
flange cover (only with series SNEF...)

d
d
e1
f1
f2
i1
160
20
100
130
190
21
106
138
220
23
122
168
250
23
127
181
260
27
146
195
310
27
158
209
320
27
173
239
350
31
175
251
360
31
181
267
420
35
192
288
420
35
198
294
500
33
263
394
shaft end
s1
13,5
17,5
17,5
17,5
22,0
26,0
26,0
22,0
22,0
22,0
22,0
26,0
y3
14,5
16,5
18,0
20,5
21,5
25,0
25,0
28,0
28,0
28,0
30,0
40,0
y4
5,0
6,0
6,0
5,5
6,0
6,0
6,0
6,0
6,0
6,0
10
7,0
z3
4
4
4
4
4
4
4
8
8
8
8
8
d
19
19
24
28
32
38
42
48
48
55
60
70
I
29
31
45
53
48
50
65
75
85
95
95
130
t
21,5
21,5
27,0
31,0
35,0
41,0
45,0
51,5
51,5
59,0
64,0
74,5
u
6
6
8
8
10
10
12
14
14
16
18
20
space to be kept free for assembling
VM 617 GB/11.98
2003
31
ALLWEILER
Series SNGH...ER..

SNGH... - horizontal foot mounted pump, internal ball bearing, with mechanical seal, design U...
internal ball bearing, with stuffing box, design U2...
internal ball bearing, with shaft sealing rings, design U3 and U4
external ball bearing, with mechanical seal, design D... and E...
design
U2, U3, U4
design
D..., E...
design
KA2
view X
only with design U4
pump size 40 to 440
shaft end
all designs

delivery branch arranged one
after the other (U-turn) on
centerline of pump.
Dimensions in mm
pump
size
40
80
120
210
280
440
660
940
1300
pump
size
40
80
120
210
280
440
660
940
1300
pump dimensions
h
106
118
150
160
190
200
215
225
240
k1
285
327
411
446
531
580
630
690
760
k2
393
435
503
580
630
716
800
886
965
q7
130
160
180
195
220
255
285
290
290
foot dimensions
q9
205,5
233,5
273,0
301,5
322,0
357,0
407,0
419,0
439,0
r
130
155
185
205
220
245
270
290
310
a
70
70
140
140
200
200
200
200
300
b
144
144
180
180
300
300
300
300
370
suction flange
nom.
diam.
Sense of rotation:
clockwise seen
from drive side
Valve dimensions and connections:

for pipeline installation see dimension leaflet VM 617 GB/...2009, page 37
z1/z2 = No. of holes
c
10
10
15
15
30
30
30
30
35
e
114
114
190
190
280
280
280
280
380
shaft end
f
170
170
210
210
350
350
350
350
430
i
193
235
246
281
291
340
390
450
420
s
12,0
12,0
14,5
14,5
24,0
24,0
24,0
24,0
24,0
d
19
19
24
28
32
38
42
48
48
delivery flange
nom.
diam.
DNS
g3
y1
z1
DNd
g3
y2
z2
32
50
65
80
100
125
150
150
150
140
165
185
200
220
250
285
285
285
100
125
145
160
180
210
240
240
240
19
19
19
19
19
19
23
23
23
140
150
170
185
190
200
250
250
250
18
20
20
22
24
26
26
26
26
4
4
4
8
8
8
8
8
8
25
40
50
65
80
100
125
125
125
115
150
165
185
200
235
270
270
270
85
110
125
145
160
190
220
220
220
14
19
19
19
19
23
28
28
28
140
150
170
185
190
200
250
250
250
18
20
22
24
26
28
30
30
30
4
4
4
8
8
8
8
8
8
t
21,5
21,5
27,0
31,0
35,0
41,0
45,0
51,5
51,5
u
6
6
8
8
10
10
12
14
14
connections
PN 64 DIN 2546, form B c
I
29
31
45
53
48
50
65
75
85
g3
upon request
y2
z2
drainage
venting
pressure
gauge
B3/B4
B8/B9
E6/E7
M1/M2
G
G
G
G
G
G
G
G
G
G
G
G
G
G
-
G
G
G
G
G
G
G
G
G
G
G
G
G
32
VM 617 GB/11.98
2004
ALLWEILER
Series SNGF...ER..

SNGF... -flange mounted pump, internal ball bearing, with mechanical seal, design U...
internal ball bearing, with shaft sealing rings, design U3 and UJ4
external ball bearing, with mechanical seal, design D... and E....
design
U2, U3, U4
design
U...
design
D..., E...
design
KA2
shaft end
all designs

delivery branch arranged one
after the other (U-turn) on
centerline of pump.
Dimensions in mm
pump
size
40
80
120
210
280
440
660
940
1300

with built-on pump type see dimension leaflet VM 617 GiB/...2008, page 36
for pipeline installation see dimension leaflet VM 617 GiB/...2009, page 37
z1/z2/z3 = No. of holes
pump dimensions
flange cover
k2
c
n2
o1
q7
q9
a1
393
435
503
580
630
716
800
886
965
162
174
207
217
247
257
307
317
382
83
95
115
125
140
150
165
175
190
130
160
180
195
220
255
285
290
290
205,5
233,5
273,0
301,5
322,0
357,0
407,0
419,0
439,0
130
155
185
205
220
245
270
290
310
190
230
260
290
310
360
380
400
410
b1
d
c1
d
c3
130
155
185
205
220
250
270
290
310
130
153
163
172
175
208
227
241
259
130
153
175
198
209
234
259
287
307
Sense of rotation:
clockwise seen
from drive side
shaft end
e1
d
f1
d
f2
i1
s1
y3
y4
z3
160
190
220
250
260
310
320
350
360
20
21
23
23
27
27
27
31
31
100
106
122
127
146
158
173
175
181
130
138
168
181
195
209
239
251
267
13,5
17,5
17,5
17,5
22,0
26,0
26,0
22,0
22,0
14,5
16,5
18,0
20,5
21,5
25,0
25,0
28,0
28,0
5,0
6,0
6,0
5,5
6,0
6,0
6,0
6,0
6,0
4
4
4
4
4
4
4
8
8
19
19
24
28
32
38
42
48
48
29
31
45
53
48
50
65
75
85
21,5
21,5
27,0
31,0
35,0
41,0
45,0
51,5
51,5
6
6
8
8
10
10
12
14
14
max. dimension with by-pass valve, may be smaller each ace. to valve type. For return valves see dimension leaflet VM (617 GB/...2008, page 36
pump
size
40
80
120
210
280
440
660
940
1300
nom.
diam.
suction flange
nom.
diam.
delivery flange
PN 64 DIN 2546, form B e
DNs
g3
y1
z1
DNd
g3
y2
z2
32
50
65
80
100
125
150
150
150
140
165
185
200
220
250
285
285
285
100
125
145
160
180
210
240
240
240
19
19
19
19
19
19
23
23
23
140
150
170
185
190
200
250
250
250
18
20
20
22
24
26
26
26
26
4
4
4
8
8
8
8
8
8
25
40
50
65
80
100
125
125
125
115
150
165
185
200
235
270
270
270
85
110
125
145
160
190
220
220
220
14
19
19
19
19
23
28
28
28
140
150
170
185
190
200
250
250
250
18
20
22
24
26
28
30
30
30
4
4
4
8
8
8
8
8
8
g3
upon request
y2
z2
connections
drainage
pressuregauge
E3/E4
E6/E7
E8/E9
M1/M2
G
G
G
G
G
-
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
VM 617 GB/11.98
2005
33
ALLWEILER
Series SNGS...ER..
SNGS... - Vertical pedestal mounted pump, internal ball bearing, with mechanical seal, design U...
internal ball bearing, with shaft sealing rings, design U3 and U4
external ball bearing, with mechanical seal, design D... and E...

delivery branch arranged
superimposed (U-turn) on
centerline of
pump.
shaft end all

designs
Sense of rotation:
clockwise seen
from drive side
screw arrangement at pump

foot for:
II = SNGS 40
IV = SNGS 80 to 210
V = SNGS 280 to 940
VI = SNGS 1300
IEC
size
71
80
90 S
90 L
100 L
112 M
132 S
132 M
160 M
160 L
z1 /z2 /z3/z4 = No. of holes

with built-on pump type see dimension leaflet VM 617 GB/...2008, page 36
pump
size
40
80
120
210
280
440
660
940
1300
pump dimensions
c
Dimensions in mm
flange cover
d
d
Standard motors
k5
k5
IEC
appr. size appr.
240
275
305
330
365
380
445
485
585
630
180 M
180 L
200 L
225 S
225 M
250 M
280 S
280 M
315 S
315 M
foot dimensions
650
690
735
810
835
940
1000
1050
1140
1200
shaft end
k7
n2
o1
q6
q7
a1
b1
c1
c3
e1
f1
f2
i1
s1
y3
y4
z3
a2
c2
e2
s2
z4
451,0
519,5
608,0
651,0
832,0
851,0
916,0
1011
1116
162
174
207
217
247
257
307
317
382
83
95
115
125
140
150
165
175
190
115,5
126,0
155,0
154,0
290,0
239,0
224,0
302,0
387,0
130
160
180
195
220
255
285
290
290
190
230
260
290
310
360
380
400
410
130
155
185
205
220
250
270
290
310
130
153
163
172
175
208
227
241
259
130
153
175
198
209
234
259
287
307
160
190
220
250
260
310
320
350
360
20
21
23
23
27
27
27
31
31
100
106
122
127
146
158
173
175
181
130
138
168
181
195
209
239
251
267
13,5
17,5
17,5
17,5
22,0
26,0
26,0
22,0
22,0
14,5
16,5
18,0
20,5
21,5
25,0
25,0
28,0
28,0
5,0
6,0
6,0
5,5
6,0
6,0
6,0
6,0
6,0
4
4
4
4
4
4
4
8
8
250
280
320
340
400
420
480
510
560
22
23
25
25
30
35
35
40
35
220
240
280
300
360
380
440
460
500
14
18
18
18
18
18
18
18
23
4
6
6
6
8
8
8
8
8
19
19
24
28
32
38
42
48
48
29
31
45
53
48
50
65
75
85
21,5
21,5
27,0
31,0
35,0
41,0
45,0
51,5
51,5
6
6
8
8
10
10
12
14
14
Space to be kept free for assemblinig.
pump
size
suction flange
delivery flange
nom.
diam.
PN 16 DIN EN 1092-2, form B
40
80
120
210
DNS
32
50
65
80
A
140
165
185
200
B
100
125
145
160
D
19
19
19
19
g3
140
150
170
185
y1
18
20
20
22
z1
4
4
4
8
DNd
25
40
50
65
E
115
150
165
185
F
85
110
125
145
H
14
19
19
19
g3
140
150
170
185
y2
18
20
22
24
z2
4
4
4
8
280
440
660
940
1300
100
125
150
150
150
220
250
285
285
285
180
210
240
240
240
19
19
23
23
23
190
200
250
250
250
24
26
26
26
26
8
8
8
8
8
80
100
125
125
125
200
235
270
270
270
160
190
220
220
220
19
23
28
28
28
190
200
250
250
250
26
28
30
30
30
8
8
8
8
8
nom.
diam.
connections
PN 64 DIN 2546, form B

E
g3
upon request
y2
z2
drainage
B5
G
G
G
G1
G1
G1
G 1
G 1
G 1
venting
E4
G
G
G
G
E6
G
G
G
G
G
-
pressure
gauge
leakage
oil
M1/M2
G
G
G
G
G
G
G
G
G
T
G
G
G
G
G
G
G
G
G
34
VM 617 GB / 1198
2006
ALLWEILER
Series SN ...ER..
Heating - not valid for fabricated (welded) design

Series SNH, SNF, SNS, SNGS, design ...E = with heating elements for electrical heating
design ...P = with heating cartridges for steam or heat conveyors
design ...X = with heating cover for steam or heat conveyors
pump
size
40
80
120
210
280
440
660
940
1300
1700
2200
2900/3600
pump dimensions f
heating
steam/heat
conveyor
heating (electrical)
pipe
total heat
capacity
(2 elements)
connec-
key
k7
k8
k9
p4
p5
q6
q7
q8
u1
H1/H2
d1/d2
length
tion
width
451,0
519,5
608,0
651,0
832,0
851,0
916,0
1011
1116
1202
1276
1521
453,5
490,5
589,5
648,5
721,0
777,0
876,0
972,0
1061
1166
1247
1444
413
454
521
604
653
744
825
908
995
1090
1168
1367
223,5
215,5
272,5
296,5
331,0
337,0
386,0
417,0
491,0
536,0
532,0
624,0
183
179
204
252
263
304
335
353
425
460
453
547
115,5
126,0
155,0
154,0
290,0
239,0
224,0
302,0
387,0
-
130
160
180
195
220
255
285
290
290
-
220,5
244,5
291,5
298,5
441,0
411,0
426,0
456,0
546,0
572,0
561,0
701,0
100
120
145
170
175
200
225
244
265
295
310
352
G
G
G
G
G
G
G
G
G
G
G
G
18
18
18
18
18
18
22
22
22
-
240
260
300
420
460
460
680
880
1000
1340
1340
1600
130
150
170
190
210
210
240
250
280
300
300
360
20
20
20
25
25
25
32
40
40
50
50
50
G
G
G
G1
G1
G1
G 1
G 1
G 1
G2
G2
G2
32
32
32
41
41
41
60
60
60
75
75
75
heating elements 2310 V, 50 Hz
heating up time of pump

in minutes at t =
25C 50C 75C 100C
60
120
240
320
f Further dimensions see dimension leaflet VM 617/...2000 for SNH, VM 617/...2001 for SNF, VM 617/...2002 for SNS, VM 611 7/...2006 for SNGS.
VM 617 GB/ 11.98
2007
35
ALLWEILER
Series SN ...ER..
Valve dimensions and connections - not valid for fabricated (welded) design
Pressure relief valves built-on lpumps of series SNH, SNF, SNS, SNGS, SNGF
Valve construction in GG (c.i.) and GGG (s.g.c.i.)
pump
size
SN..
max. permissible
flowworking
through pressure
e
l/min
40
200
80
200
210
120
550
210
210
280
550
bar
0-38
38-58
0-38
38-58
0-38
0-44
0-98
0-38
0-44
0-98
0-13,5
13,5-38
900
0-98
0-13,5
13,5-38
440
900
0-98
0-13,5
13,5-38
900
0-98
660
0-18
1800
0-98
0-13,5
13,5-38
900
0-98
940
0-18
1800
0-98
0-16
1300
2500
1700
2500
0-98
0-16
0-16
2200
2500
2900
3600
36
0-98
0-98
0-9,0
3600
0-98
valve
type
c
DS 3 5 f
DT 35 f
DS 3 5 f
DT 35 f
DS 41
DS 38g
DVI 38g
DS 41
DS 38
DVI 38h
DS 44
DT 44
DV 44
DVI 44
DVS44
DS 44
DT 44
DV 44
DVI 44
DVS44
DS 44
DT 44
DV 44
DVI 44
DVS44
DS 47
DV 47
DVI 47
DS 44
DT 44
DV 44
DVI 44
DVS44
DS 47
DV 47
DVI 47
DS 50
DV 50
DVI 50
DVS50
DS 50
DV 50
DVI 50
DVS50
DS 50
DV 50
DVI 50
DVS50
DS 56
DV 56
DVS56
valve dimensions
design
d
ABfCD
f
bypass
k3
k4
A B C D
- B - D
A B C D
p1
v1
384
384
362
402
384
384
-
v2
n2
pipe thread
n1
PN16
DIN EN 1092-2
n3
DNr
182
155
G1
174
167
G1
20,0 63,5 80,0 111 185
178
G1
44,0 87,5 80,0 121 207
200
G1V2
19,0 69,5 81,0 111 195
188
G1
43,0 93,5 81,0 122 217
210
G1V2
66,0 148 119 167 247
270
65
270
65
280
65
280
65
295
175 210 24,5 49,0 48,5
ABfCD
175 210
f
A B C D 198 245
261 292
A B C D
300 340
A B C D 198 245
261 292
A B C D
300 340
362 410
A B C D
402 450
- B - D
22,0 62,5 51,0
119 j
j
j 66,0 148 119 j 247
360
- 124
410
65,0 148 120 168 257
450
120 j
j
j 65,0 148 120 j 257
360
- 125
362 410
65,0 148 120 168 272
402 450
384 j
120 j
384 j 65,0 148 120 j 272
- 360
- 125
A B C D 400 468 65,0 148 125 193 307
- B - D
65
305
65
360
80
400 468 60,0 195 130 198 317
360
80
A B C D 550 620 100 230 180 250 382

470 j
180 j
- B - D 470 j 100 230 180 j 382
- 530
- 270
A B C D 550 620 89,0 - 191 261 402
385
100
385
100
405
100
405
100
270 407
j
j 407
290
410
100
410
100
295 467
467
125
213 295
467
- 300
467
125
- B - D
700 100
620 700
100
545
19
25
80
305
125 250 210 188
350
4
8
8
620 80,0
j
j 80,0
530
z4
18
22
22
C
D
362 410
60,0 195 125 173 282
402 450
y5
3
3
3
65
A B C D
j
j 402
281
f4
19
19
19
295
80
191
191
200
200
200
213
A
B
350
j
j 89,0
530
470
- B - D 470
A B C D 550
470
- B - D 470
A B C D 620
65
- B - D
65 185 145 122

80 200 160 138
100 220 180 158
DS = Pressure relief valve

with coil spring,
directly operated
DT = Pressure relief valve
with disc springs,
directly operated
DV = Pressure relief valve
directly pilot-operated
DVI = Pressure relief valve
indirectly pilot-operated
DVS = Pressure relief valve
directly pilot-operated,
marine design for
vertical pumps
400 468 65,0 148 125 193 307
384 j
125 j
384 j 80,0 195 125 j 282
- 360
- 130
A B C D 400 468 60,0 195 130 198 317
DNr
- B - D
- B - D
flange dimensions
(back piping connection)
PN16 DIN EN 1092-2, form C
additional dimensions
back piping connections
= by-pass relief valve

= by-pass relief valve
with manual control
= return relief valve
= return relief valve
with manual control
In the case of differential

pressure over 40 bars return
valves (type...C and D...) should
generally be employed.
With pump type SNS 40 and

SNS 80 the valve types DS 35
and DT 35 in design B and D (i.e.
with manual control) are not
possible.
With pump type SNS 120 the

valve type DS 38 and DVI 38 only
with intermediary (between
pump casing and round pump
foot) possible.
With pump type SNS 210 the

valve type DVI 38 only with
intermediary (between pump
casing and round pump foot)
possible.
No dimension because manual

control on opposite adjusting
screw (control acts on pressure
spring).
No dimension because of
lateral adjusting screw.
VM 617 GB/05.00
2008
ALLWEILER
Series SN ...ER..
Valve dimensions and connections
Pressure relief valves for pipe line installation
valve size 23 to 38
valve size 44
valve size 44 to 56
z 4 /z 6 = No. of holes
discharge
flow through
max.
permissible
working
pressure
Dimensions iin mm. Alteration of dimensions reserved
valve
type
design
valve dimensions
material of
casing
connections
inlet (feeding)
nominal
pipe
thread diam. press.
outlet (return)
nominal
pipe
thread diam. press.
from
to
l/min
l/min
bar
n4
n5
DNV
PN
y8
z6
DNr
PN
y5
z4
35
0-38
DS23
EF
GG, GGG, St
110 115 40
35
20
160
0-38
DS29
EF
GG, GGG, St
160 190 62
50
G1
G1
38-58
DT29
EF
GG, GGG, St
160 190 62
50
G1
G1
0-44
DS38
EF
GG, GGG, St
230 260 88
57 G 1
G 1
0-58
DVI38
GG, GGG, St
292
88
57 G 1
G 1
0-98
DVI38
GGG, St
292
88
57
G 1
G 1
0-13,5
DS44
EF
GG, GGG, GS
255 280 78
70
50
40
165 125 18
22
G2
13,5-38
DT44
EF
GG, GGG, GS
300 325 78 70
275 e 78 70
325 e 132 112
50
40
22
G2
50
40
22
G2
50
100
165 125 18
165 125 18
195 145 27
28
50
16
165 125 18
18
355 380 140 130
65
40
185 145 18
24
80
16
200 160 18
24
380 410 160 160
65
40
185 145 18
22
80
16
200 160 18
20
335 e 140 130
65
40
185 145 18
24
80
16
200 160 18
24
St
360 e 160 160
65
40
185 145 18
22
80
16
200 160 18
20
St
360 e 160 160
65
100
220 170 27
30
80
16
200 160 18
20
406 440 150 140
80
40
200 160 18
26
100
16
220 180 18
24
468 500 200 180
80
40
200 160 18
24
100
16
220 180 18
20
320 e 150 140
80
40
200 160 18
26
100
16
220 180 18
24
St
380 e 200 180
80
40
200 160 18
24
100
16
220 180 18
20
230 180 27
235 190 23
235 190 23
265 210 30
32
100
16
220 180 18
20
24
125
16
250 210 18
22
24
36
8
8
125
125
16
16
250 210 18
250 210 18
22
22
8
8
50
100
200
400
600
300
660
1300
2200
3600
l1
0-38
DV44, DVI44
GG, GGG, GS
0-98
DV44, DVI44
St
0-18
DS47
EF
0-38
DV47, DVI47
0-98
DV47, DVI47
0-16
DS50
EF
GG, GGG
St
GG, GGG
GG
St
GG
l2
0-38
DV50, DVI50
0-98
DV50, DVI50
St
380 e 220 180
80
100
0-9
DS56
EF
St
100
40
0-38
0-98
DV56
0V56
F
F
St
St
500 520 220 200

400 e 220 200
395 e 240 200
100
100
40
100
DS = Pressure relief valve with coil spring, directly operated
DT = Pressure relief valve with disc springs, directly operated

DV = Pressure relief valve directly pilot-operated
DVI = Pressure relief valve indirectly pilot-operated
VM 617 GB / 05.00
2009
E = pipe line relief valve without manual control
F = pipe line relief valve with manual control

No dimensiom because of lateral adjusting screw.
37
ALLWEILER
Series SNH...ER..
Installation plan - not valid for fabricated (welded) design

SNH... - horizontal foot mounited pump, internal ball bearing, with mechanical seal, design U... *)
Allocation of foundation screws to the base plate sizes
see dimension table of the base plates.

Leakage drain on base plate upon request only.
h 3 = h or h 4 (use max. dimension) + h1
h 4 = size of motor, e.g. 180 M = 180 mm.
Branch position:
Suction and delivery
branch opposed in one
line (In-line) on
centerline of pump.
The sense of flow may
be changed without
alteration of sense of
rotation by turning the
pump casing by 180.
pump
size
connections
drain- ventpresage
sure
ing
gauge
SNH
B1/B2
E3/E4 M1/M2
40
80
120
210
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
280
440
660
940
1300

Additional dimensions in case of heating see dimension leaflet VM 617 GB/...2007, page 35
Dimensions in mm
pump
size
Z1/Z2
= No. of holes
pump dimensions
1700
2200
2900/3600
Sense of rotation:
clockwise seen from
drive side
suction flange
delivery flange
nom. up to DN 150-PN16 DIN EN 1092-2, form B from

DN 200 - PN 10 DIN EN 1092-2, form B
diam.
G
G
G
G
G
G
G
G
G
G
G
G
nom.
diam.
PN 64 DIN 2546, form B h
k2
n2
p3
DNs
g1
y1
z1
DNd
g2
y2
z2
g2
y2
z2
40
80
106
118
393
435
162
174
189
213
163
160
32
65
140
185
100
145
19
19
100
120
18
20
4
4
25
50
115 85
165 125
14
19
100
120
18
22
4
4
140 100
180 135
18
22
106
124
24
26
4
4
120
150
503
207
265
186
65
185
145
19
130
20
50
165 125
19
130
22
180 135
22
134
26
210
160
580
217
285
228
80
200
160
19
150
22
65
185 145
19
150
24
205 160
22
152
26
280
190
630
247
330
240
100
220
180
19
165
24
80
200 160
19
165
26
215 170
22
167
28
440
200
716
257
350
276
125
250
210
19
180
26
100
235 190
23
180
28
250 200
26
182
30
660
215
800
307
380
310
125
250
210
19
195
26
100
235 190
23
195
28
250 200
26
197
30
940
225
886
317
400
331
150
285
240
23
205
26
125
270 220
28
205
30
295 240
30
209
34
1300
240
965
382
430
395
150
285
240
23
220
26
125
270 220
28
220
30
295 240
30
224
34
1700
260
1060
402
470
430
200
340
295
23
240
26
150
300 250
28
240
34
345 280
33
242
36
2200
265
1136
407
480
421
200
340
295
23
250
26
150
300 250
28
250
34
345 280
33
252
36
2900/3600
315
1322
467
560
502
250
395
350
23
300
28
12
200
375 320
31
300
40
12
38
VM 617 GB / 11.98
3000/3001
ALLWEILER
Series SNH...ER..
base plate dimensions
base
plate
size
Gr.
b2
b3
d1
d
d2
h1
h2
l1
foundation screws
allocation
I2
I5
base plate dimensions
base
plate
size
ea.
dimension
Gr.
M 12 x 160
M 12 x 160
10.1
11.1
foundation screws
allocation
d1
d
d2
h1
h2
l1
I2
l3
l4
I5
ea.
dimension
470 510
520 560
18,5
18,5
G
G
87
90
7
7
1120
1250
900
1190
450
595
110
30
6
6
M 16 x 250
M 16 x 250
b2
b3
2
3
265 305
300 340
14,5
14,5
G
G
40
45
25
30
515
575
315 100
355 110
4
4
300 340
14,5
45
30
645
400 122
M 12 x 160
11.4
595 635
18,5
90
1250
1190
595
30
M 16 x 250
5
6
335 379
375 419
18,5
18,5
G
G
50
50
30
30
725
815
500 112
560 127
4
4
M 16 x 160
M 16 x 160
12.1
12.3
575 615
645 685
18,5
18,5
G
G
115
115
8
8
1400
1400
1340
1340
440
440
30
30
8
8
M 16 x 250
M 16 x 250
7.1
320 350
14,5
70
900
630 135
M 12 x 160
13.1
575 615
18,5
115
1600
1540
500
30
M 16 x 250
8.1
9.1
400 430
445 485
14,5
18,5
G
G
72
87
6
7
900 630 135

1000 710 145
4
4
M 12 x 160
M 16 x 250
14.1
16.3
675 715
675 715
18,5
18,5
G
G
115
115
8
8
1600
1800
1540
1740
500
580
30
30
8
8
M 16 x 250
M 16 x 250
17.1
675 715
18,5
120
2000
1940
650
30
M 16 x 250
leakage drain on base plate upon request only.
motor size i
71
80
90 S
90 L
100 L
112 M
132 S
132 M
k5 approx.
265
290
310
335
385
415
475
515
625
0,25 / 0,37
0,37 / 0,55
0,55 / 0,75
0,75
1,1
1,1
1,5
0,75 / 1,1
1,5
2,2 / 3,0
1,5
2,2
4,0
2,2
3,0
5,5
3,0
4,0 / 5,5
7,5
4,0 / 5,5
7,5
11,0
0,37 / 0,55
0,75 / 1,1
1,5
2,2
3,0
4,0
5,5 / 7,5
11,0/15,0
750 1/min
kW 1000 1/min
at = 1500 1/min
3000 1/min
pump size
160 M
required base plate and coupling/dimension xH or xv

xH
Gr
Ku
xH
Gr
Ku
xH
Gr
Ku
xH
Gr
Ku
xH/xV
Gr
Ku
xH/xV
Gr
Ku
xH/xv
Gr
Ku
xH/xV
Gr
Ku
xH/xV
Gr
Ku
SNH 40
SNH 80
SNH 120
35 H
-
2
-
28
-
45 H
60 H
10 H
3
4
5
28
28
28
45 H
60 H
10 H
3
4
5
28
28
28
45 H
60 H
10 H
3
4
5
28
28
28
60 H
50 H
25 H
4
5
6
28
28
28
60 H
50 H
25 H
4
5
6
28
28
28
50 H
60 H
25 H
5
6
6
38
38
38
50 H
60 H
25 H
5
6
6
38
38
38
55 H
80 H
50 H
6
8.1
9.1
42
42
42
SNH 210
SNH 280
SNH 440
25 H
-
6
-
28
-
25 H
-
6
-
28
-
40 H
10 V
7.1
8.1
28
38
7.1
8.1
28
38
38
38
38
9.1
38
9.1
38
40 H
0
0
8.1
9.1
9.1
40 H
0
0
8.1
9.1
10 V
40 H
10 V
10 V
38
38
38
50 H
35 V
35 V
9.1
10.1
10.1
42
42
42
SNH 660
SNH 940
SNH 1300
35 V
-
10.1 42
-
35 V
35 V
-
10.1 42 165 V 11.1

10.1 48 130 V 11.1
- 230 V 12.1
42
48
48
SNH 1700
motor size i
200 L
225 S
200 V 12.1
55
250 M
160 L
180 M
k5 approx.
670
700
730
790
830
750 1/min
kW 1000 1/min
at = 1500 1/min
3000 1/min
7,5
11,0
15,0
18,5
11,0
15,0
22,0
15,0
18,5 / 22,0
30,0
18,5
37,0
22,0
30,0
45,0
30,0
37,0
55,0
18,5
22,0
30,0 / 37,0
45,0
55,0
pump size
180 L
9.1
225 M
875
960
required base plate and coupling/dimension xH or xv

xH/xV
Gr
Ku
xH/xV
Ku
XH/xV
Ku
xH/xV
Ku
xV
Gr
Ku
xV
Gr
Ku
xV
Gr
Ku
xV
Gr
Ku
xV
Gr
Ku
SNH 80
SNH 120
SNH 210
80 H
50 H
50 H
8.1
9.1
9.1
42
42
42
90 H
50 H
15 H
9.1 48
9.1 48
10.1 48
50 H
15 H
9.1 48
10.1 48
90 H
15 H
15 H
9.1 55
10.1 55
10.1 55
150 V
11.1 60
150 V
11.1 60
80 V 11.1 55
90 V 11.1 55
90 V
11.4
60
SNH 280
35 V 10.1 42
35 V
10.1 48
35 V
10.1 48
215 V
11.1 55
175 V
11.1 60
175 V
11.1 60
175 V 11.1 55
160 V 12.1 65
160 V
12.1
60
SNH 440
SNH 660
SNH 940
35 V 10.1 42
165 V 11.1 42
130 V 11.1 48
170 V 11.1 48
165 V 11.1 48
130 V 11.1 48
170 V 11.1 48
165 V 11.1 48
130 V 11.1 48
170 V
125 V
170 V
11.1 55
11.1 55
12.1 55
120 V
190 V
140 V
11.1 60
12.1 60
12.1 60
120 V 11.1 60
190 V 12.1 60
140 V 12.1 60
120 V 11.1 55
190 V 12.1 55
140 V 12.1 55
210 V 12.1 65
160 V 12.1 65
105 V 12.1 65
210 V
160 V
105 V
12.1
12.1
12.1
60
60
60
SNH 1300
230 V 12.1 48
230 V 12.1 48
230 V 12.1 48
190 V
12.1 55
160 V
12.1 60
160 V 12.1 60
160 V 12.1 55
230 V 13.1 65
230 V
13.1
60
SNH 1700
SNH 2200
200 V 12.1 55
-
160 V 12.1 55
200 V 13.1 60
160 V 12.1 55
200 V 13.1 60
260 V
200 V
13.1 55
13.1 60
250 V
180 V
13.1 60
13.1 60
250 V 13.1 60
180 V 13.1 60
250 V 13.1 55
-
200 V 13.1 65
140 V 13.1 65
200 V
-
13.1
-
60
-
290 V 16.3 75
290 V 16.3 75
290 V
16.3 75
290 V
16.3 75
290 V 16.3 75
360 V 17.1 75
SNH 2900/3600
Gr
Gr
Gr
.
motor size i
280 S
280 M
315 S
315 M
k5 approx.
1020
1064
1130
1200
750 1/min
kW 1000 1/min
at = 1500 1/min
3000 1/min
pump size
37,0
45,0
75,0
45,0
55,0
90,0
75,0
ber 315 M
-
55,0
75,0
110,0
75,0
90,0
132,0
90,0
110,0
132,0
required base plate and coupling/dimension xv

Ku
xV
Gr
Ku
SNH 280
SNH 440
SNH 660
xV
135 V 12.3 75
150 V 14.1 75
Gr
Ku
140 V 12.3 65
135 V 12.3 65
150 V 14.1 65
xV
135 V 12.3 75
150 V 14.1 75
140 V 12.3 65
135 V 12.3 65
150 V 14.1 65
150 V 14.1 85
150 V
150 V
14.1 65
14.1 65
SNH 940
170 V 14.1 75
170 V 14.1 65
170 V 14.1 75
170 V 14.1 65
110 V 14.1 85
110 V
14.1 65
SNH 1300
SNH 1700
SNH 2200
180 V 14.1 75
160 V 14.1 75
190 V 16.3 75
180 V 14.1 65
160 V 14.1 65
-
180 V 14.1 75
160 V 14.1 75
190 V 16.3 75
180 V 14.1 65
160 V 14.1 65
-
190 V 16.3 85
235 V 16.3 85
250 V 17.1 85
190 V
235 V
-
16.3 65
16.3 65
-
SNH 2900/3600
300 V 17.1 75
285 V 17.1 85
Gr = base plate size up to 6 of cast iron,

from 7.1 onwards of fabricated steel
Ku = coupling size Polynorm A
Gr
Ku
xV
Gr
Ku
300 V 17.1 75
xV
Gr
Ku
xV
Gr
Ku
xV
Gr
xV
Ku
xV
Gr
Ku
150 V 14.1 75
150 V 14.1 75
j
j
j
j
j
j
j
j
j
110 V 14.1 85
110 V 14.1 75
190 V 16.3 85
235 V 16.3 85
250 V 17.1 85
190 V 16.3 75
235 V 16.3 65
-
j
j
j
j
j
j
j
j
j
285 V 17.1 85
Gr
Three-phase A.C. Standard motors construction IM B3 and enclosure higher than IP 23.
In case of three-phase A.C. Standard motors with enclcosure IP 23 as well as motor sizes above
315 M and D.C. motors dimensions of base plate and ctoupling upon request.
upon request.
39
ALLWEILER
Series SNF...ER..
Unit dimensions - not valid for fabricated (welded) design

SNF... - flange mounted pumip, internal ball bearing, with mechanical seal, design U... *)
internal ball bearing, with stuffing box, design U2 *) **) internal ball
bearing, with shaft sealing rings, design U3 *) **) and U4 *) **) external ball
bearing, with mechanical seal, design D... *) **) and E... *) external ball
bearing, with stuffing box, design KA2 *) **)

delivery branch opposed in
one line (In-line) on centerline
of pump.
standard motors
k5
IEC
k5
IEC
size appr size appr.
The sense of flow may be

changed without alteration of
sense of rotation by turning
the pump casing by 180.

Additional dimensions in case of heating see dimension
leaflet VM 617 GB/...2007, page 35
Dimensions in mm
Alteration of dimensions
reserved
z1 / z2 = No. of holes
pump
size
40
80
120
210
280
440
660
940
1300
1700
2200
2900/3600
foot dimensions
pump-/unit dimensions
240
275
305
330
365
380
445
485
585
630
180 M
180 L
200 L
225 S
225 M
250 M
280 S
280 M
315 S
315 M
650
690
735
810
835
940
1000
1050
1140
1200
shaft end
a1
i1
190
230
260
290
310
360
380
400
410
480
480
560
180
180
195
210
220
280
290
310
310
340
340
e
130
138
168
181
195
209
239
251
267
288
294
394
k0
k2
459,5 393
498,0 435
558,0 503
633,0 580
680,5 630
778,5 716
865,0 800
950,0 886
1015,5 965
1121,0 1060
1197,0 1136
e
1325
n2
o1
162
174
207
217
247
257
307
317
382
402
407
467
83
95
115
125
140
150
165
175
190
210
215
263
230
275
317
352
390
440
490
555
570
630
715
820
130
155
185
205
220
245
270
290
310
350
360
414
128,0
168,0
182,0
195,0
225,5
272,5
295,0
344,0
345,5
381,0
466,0
e
140
140
160
180
185
190
220
235
235
270
270
e
170
250
250
250
250
355
355
355
355
355
355
e
33
40
40
40
40
40
40
40
40
40
40
e
207
315
315
315
315
410
410
410
410
410
410
e
57
60
60
60
60
80
80
80
80
80
80
e
11
18
18
18
18
23
23
23
23
23
23
e
19
19
24
28
32
38
42
48
48
55
60
70
29
31
45
53
48
50
65
75
85
95
95
130
21,5
21,5
27,0
31,0
35,0
41,0
45,0
51,5
51,5
59,0
64,0
74,5
6
6
8
8
10
10
12
14
14
16
18
20
Only valid for three-phase A.C. stanidard motors with enclosure
max. dimension with by-pass valve, may be smaller each acc. to valve type.
higher than IP 23. In case of three-phase A.C. standard motors

with enclosure IP 23 and for D.C. motors dimensions upon request.
pump
size
Sense of rotation:
clockwise seen
from drive side
71
80
90 S
90 L
100 L
112 M
132 S
132 M
160 M
160 L
suction flange
For return valves see dimension leaflet VM 617 GB/...2008, page 36
upon request only.
delivery flange
PN 64 DIN 2546, form B
nom. up to DN 150- PN 16 DIN EN 1092-2, form B nom.

diam.
diam.
from DN 200-PN 10 DIN EN 1092-2, form B
drainage
connections
ventpresing
sure
gauge
B1/B2 E3/E4 M1/M2
leakage
oil
DNS
g1
y1
z1
DNd
g2
y2
z2
g2
y2
z2
40
80
120
210
280
440
660
940
32
65
65
80
100
125
125
150
140
185
185
200
220
250
250
285
100
145
145
160
180
210
210
240
19
19
19
19
19
19
19
23
100
120
130
150
165
180
195
205
18
20
20
22
24
26
26
26
4
4
4
8
8
8
8
8
25
50
50
65
80
100
100
125
115
165
165
185
200
235
235
270
85
125
125
145
160
190
190
220
14
19
19
19
19
23
23
28
100
120
130
150
165
180
195
205
18
22
22
24
26
28
28
30
4
4
4
8
8
8
8
8
140
180
180
205
215
250
250
295
100
135
135
160
170
200
200
240
18
22
22
22
22
26
26
30
106
124
134
152
167
182
197
209
24
26
26
26
28
30
30
34
4
4
4
8
8
8
8
8
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
1300
1700
2200
2900/3600
150
200
200
250
285
340
340
395
240
295
295
350
23
23
23
23
220
240
250
300
26
26
26
28
8
8
8
12
125
150
150
200
270
300
300
375
220
250
250
320
28
28
28
31
220
240
250
300
30
34
34
40
8
8
8
12
295
345
345
-
240
280
280
-
30
33
33
-
224
242
252
-
34
36
36
8
8
8
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
40
VM 617 GB / 11.98
3002
Series SN
ALLWEILER
41
Series SN
42
ALLWEILER
Series SN
ALLWEILER
43
Series
ALLWEILER
Subject to technical alterations.

The mentioned performance data are to be considered as a product and performance abstract only. The particular operating limits can be taken from the
quotation or order acknowledgement.
ALLWEILER AG
Postfach 1140 78301 Radolfzell
Allweilerstr. 1 78315 Radolfzell
Germany
Tel. + 49 (0)7732 86-0
Fax. + 49 (0)7732 86-436
E-Mail: [email protected]
Internet: http://www.allweiler.com
VM 617 GB / 07.06 - Ident No. 795 568

Allweiler Screw Pumps

Uploaded by

Copyright:

Available Formats

Allweiler Screw Pumps

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Allweiler Screw Pumps

Uploaded by

Copyright:

Available Formats

ALLWEILER

Series SN... ER..

admissible suction lift see

admissible supply pressure

with grease nipple. A grease volume control

please refer to the individual characteristiics.

In an external, grease lubricated groove ball bearing.

with higher temperatures inquiry of our works necessary

with graphite-incorporated PTFE packing

suction and delivery branch arranged superimposed (U-turn) on centerline of pump.

see separate technical literature

(special technical documentation).

Special mechanical seals and/or other material designs upon inquiry.

For further details of pump heating please refer to page 35.

Pump casing insert with size 40 to 120

c.i. (GJL-200) (11)

c.i. (GJL-200) (11)

drawings are available upon request

Pump casing insert + Screw spindle set

For submersible pumps designed to customers' specification dimensions

drawings will be prepared per order

Inlet pressure necessary

Performance table Delivery flow Q [1/min] and power absorbed P [kW]

Performance table Delivery flow Q [1/min] and power absorbed P [kW]

Design U... with mechanical seal

Design KA2 (pump size 80 to 2200)

* Up to pump size 210 with stud

Design U... with mechanical seal

Design KA2 (pump size 80 to 2200)

* Up to pump size 210 with stud bolt, part

Design KA2 at pump size 40

*) shown to pump size 2200

Design U... with mechanical seal

*) shown to pump size 2200

Design KA2 (pump size 80 to 2200)

* Up to pump size 210 with stud bolt, part

Design U... with mechanical seal at

Design KA2 (pump size 80 to 2200)

Design KA2 at pump size 40

Design U... with mechanical seal at

Series SNGH... ER..

* Up to pump size 210 with stud bolt, part No.

Design KA2 at pump size 40

shaft sealing housing

Design U... with mechanical seal

* Up to pump size 210 with stud bolt, part

Design U... with mechanical seal

Design U... with mechanical seal

* Up to pump size 210 with stud bolt, part

VM 617 GB/1198 1013

Branch position: Suction and

PN40 DIN EN 1092-2, form B

PN64 DIN 2546, form B

from DN200 - PN10 DIIN EN 1092-2, form B

only possible with pump casing in GGG-40 (surplus price).

Pump dimensions - not valid for fabricated (welded) design

Branch position: Suction and

nom. up to DN 150 - PN16 DIN EN 1092-2, form B nom.

PN40 DIN EN 1092-2, form B