Scribd
Upload
17 views1 page

Abstract Sujit Jagnade

Modelling, Simulation and Control of Flow Tank System discusses process control methods used to manipulate variables in manufacturing. It focuses on modelling and designing controllers for a real-time single tank flow system. The presentation identifies theoretical and practical models for a single tank system and compares them. A PID controller is designed for the flow tank using parameters calculated from the best model and three tuning methods: relay auto-tuning, Ziegler-Nichols, and Tyreus-Luyben. The controller output responses are compared both in real-time and simulation.

Uploaded by

Singh Anuj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
17 views1 page

Abstract Sujit Jagnade

Modelling, Simulation and Control of Flow Tank System discusses process control methods used to manipulate variables in manufacturing. It focuses on modelling and designing controllers for a real-time single tank flow system. The presentation identifies theoretical and practical models for a single tank system and compares them. A PID controller is designed for the flow tank using parameters calculated from the best model and three tuning methods: relay auto-tuning, Ziegler-Nichols, and Tyreus-Luyben. The controller output responses are compared both in real-time and simulation.

Uploaded by

Singh Anuj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Title: Modelling, Simulation and Control of Flow Tank System

Speaker: Jagnade Sujit(15102014)


Abstract:
Process control refers the methods that are used to control and manipulating of processes
variable in manufacturing a product. It has many importances in industrial processes. In this
seminar, a brief introduction about several aspects of process control has been provided on
flow tank. Basic types of controller and their tuning methods have been discussed here. This
presentation mainly concern with modelling and designing of controller on real time single
tank system and simulation. Here theoretical and practical processes model for single tank
system are identified and compare on real time work. From those best model used for
calculating parameters of PID Controller based on servo and regulatory system. Here three
controller tuning methods such as Relay- Auto-Tuning, Ziegler-Nichols, and Tyreus-Luyben
are used to design controller for flow tank and compare their output response in real tome
flow tank system and on simulation.

You might also like