Scribd
Upload
86 views3 pages

Measurement Point of Successfull TCH Seizures

There are 6 measurement points for successful TCH seizures: 1) When a CH_ACT_ACK message is received during immediate TCH assignment without an SDCCH, 2) When the calling status is CS_WAIT_RR_EST and the channel is TCH after receiving a CH_ACT_ACK, 3) When an assignment complete message is sent during assignment, 4) When an MSG_ABIS_HO_DETECT message is received for a non-SDCCH inter-BSC inter-cell handover, 5) When an MSG_ABIS_HO_DETECT message is received for a non-SDCCH internal inter-cell handover, and 6) When a CLEAR-

Uploaded by

Agus Andriyas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
86 views3 pages

Measurement Point of Successfull TCH Seizures

There are 6 measurement points for successful TCH seizures: 1) When a CH_ACT_ACK message is received during immediate TCH assignment without an SDCCH, 2) When the calling status is CS_WAIT_RR_EST and the channel is TCH after receiving a CH_ACT_ACK, 3) When an assignment complete message is sent during assignment, 4) When an MSG_ABIS_HO_DETECT message is received for a non-SDCCH inter-BSC inter-cell handover, 5) When an MSG_ABIS_HO_DETECT message is received for a non-SDCCH internal inter-cell handover, and 6) When a CLEAR-

Uploaded by

Agus Andriyas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Measurement Point of successfull TCH seizures

1.

When CH_ACT_ACK message is received in the immediate assignment process. Since there is no SDCCH available,
TCH channel is directly assigned.

2.

When CH_ACT_ACK message is received, the calling status is CS_WAIT_RR_EST(Waiting RR setup status) and the
present channel is TCH.

3.

When assignment complete message is sent in process of assignment.

4.

When the MSG_ABIS_HO_DETECT message is received during incoming inter BSC inter cell handover, and the handover type is
non-SDCCH handover.

5.

When the MSG_ABIS_HO_DETECT message is received during internal inter cell handover, and the handover type is non-SDCCH
handover.

6.

When the CLEAR-CMD message with the cause of HO_SUCC or CALL_CTRL is received from the MSC during inter-BSC
handover , and the handover cause is directed retry.

Direct retry process:

When the CLEAR-CMD message, whose cause values is HO_SUCC or CALL_CTRL, is received from the MSC during inter BSC
handover , and at the same time the handover cause is direct retry, one measurement point will be counted and added to successful
TCH seizures times

You might also like