Scribd
Upload
120 views

DeviceViewer Instructor

The document provides instructions for adding IP cameras to the DeviceViewer software and controlling the cameras. It outlines downloading and installing the DeviceViewer program, searching the local network for cameras, modifying device settings including name, video format, access mode, credentials, and adding the camera. It then describes how to view live video from an added camera and control pan, tilt, and zoom functions using the on-screen controls.

Uploaded by

mc168
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
120 views

DeviceViewer Instructor

The document provides instructions for adding IP cameras to the DeviceViewer software and controlling the cameras. It outlines downloading and installing the DeviceViewer program, searching the local network for cameras, modifying device settings including name, video format, access mode, credentials, and adding the camera. It then describes how to view live video from an added camera and control pan, tilt, and zoom functions using the on-screen controls.

Uploaded by

mc168
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Brief Instructor of PC Client DeviceViewer

1. Install the PC client software DeviceViewer to your PC.


You can get the DeviceViewer from the CD which attached with the camera in the gift
box. After the PC client been installed, there will be a icon displayed on the desktop.

:
1. Add cameras to the DeviceViewer
1-1. Run the DeviceViewer, you will get bellow login interface: (Default user: admin,
Password: admin)

1-2. After login the DeviceViewer. You need add the cameras to the DeviceViewer.
Move the Mouse to DeviceList, Right_click your Mouse, you will see a dialog box, then
choose Search device, Just do as bellow picture.

1-3. Click Search button. You can search out all the IP cameras in the LAN.Then choose
the camera which you need add to the DeviceViewer.

1-4: Steps1: Click Search: Button, All the devices(Device and the PC Must in the same
LAN) will be listed on the search device.
Steps2: Choose the Device which you need to added, Double click the device will show
bellow Modify device window.

1-5: How to setting the Modify device


1: Device: Change the name of the device.
2: Video: Include two mode.
One is H.264, One is Jpeg. So if the cameras Compression is H.264, then you need
choose H.264. If the cameras compression is MJPEG, then you need choose Jpeg.
3: Address: Mode of how to access the camera.
IPV4: Access the camera via IP Address.
ULR: Access the camera via DDNS.(This function no use now)
P2P : Access the camera via P2P ID.( Default choose this mode)
4: P2P ID: Here you can input the device P2P ID.
5: Username: Username of the device.
6: Password: Input the Password of the device.
After you setting all the device information ok. Finally click

Confirm.

For example:
The cmaera Device name: AP008, P2P ID: MEYE-001050-PNUVV
Video compression is MJPEG.
Username is : admin
Password is : 123456

1-6: After all the information of the camera is been setting OK, Click

, then you will

back to the Search Device window. First tick the device. Then click confirm. Then the device have
been add to the DeviceViewer and you will find out one camera have been listed on the

DeviceList.

2. How to control the camera on the DeviceViewer


2-1: View the camera
Double click the Device name
window of DeviceViewer.
2-2 Control of the Camera.

,then the camera video will show on the

Steps1: Choose the camera , then click the


the PTZ Control interface on the right of the DeviceViewer.

, will show

You might also like