DIgSILENT
PowerFactory
Application Example
SSR
Shaft Modes
1 Description
The study case is used to calculate the torsional modes of the turbine-generator shaft. The
shaft model can be seen in the graphic shf_6masses, and the connection of the shaft
model to the generator model can be seen in the graphic Frame.
The torsional modes of the shaft can be seen in Eigenvalue plot after calculating the
initial conditions and executing the modal analysis. The modal analysis is based on the same
equations as an RMS-type time domain simulation, and it includes the dynamics of the shaft
model. One of the torsional modes has a frequency of 20.2 Hz.
2 PowerFactory Project Information
Name of Project: SSR IEEE-First Benchmark
Name of Study Case: 1_Shaft_Modes
SSR - Shaft Modes
DIgSILENT GmbH
Heinrich-Hertz-Strasse 9
D-72810 Gomaringen
Tel.: +49 7072 9168 - 0
Fax: +49 7072 9168 - 88
http://www.digsilent.de
e-mail: [email protected]
SSR - Shaft Modes
Published by
DIgSILENT GmbH, Germany
Copyright 2013. All rights
reserved. Unauthorised copying
or publishing of this or any part
of this document is prohibited.
Doc. Rev. No. 2,
18 April 2013
SSR - Shaft Modes