Scribd
Upload
203 views21 pages

4G LTE Integration Training

The document describes the process and steps for integrating a 4G LTE site including connecting the site via GPON, microwave or dark fiber and configuring the necessary network and system settings on the eNodeB equipment using the WEBLMT tool.

Uploaded by

Abdirahman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
203 views21 pages

4G LTE Integration Training

The document describes the process and steps for integrating a 4G LTE site including connecting the site via GPON, microwave or dark fiber and configuring the necessary network and system settings on the eNodeB equipment using the WEBLMT tool.

Uploaded by

Abdirahman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 21

Security Level:

4G LTE
Integration
www.huawei.com

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Types of site connectivity:


1- GPON site.

GE/FE Cable

eNodeB

2- Microwave site.

GPON MDU (SmartAx)

Fiber Cable

eNodeB
MW RTN900

3- Dark Fiber site.

Fiber Cable

eNodeB
Exchange OLT

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 2

GPON connection

GPON MDU (SmartAx)

4G

3G

2G

For 4G , 3G and 2G use FE/GE cable.

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 3

Microwave Connection
MW RTN950

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 4

Microwave Connection
EM6F Card of RTN950

4G

3G

2G

For 4G and 3G use LC to LC Fiber cable


For 2G use FE/GE cable

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 5

DF Connection
Connect Fiber cable to ODF in
Exchange site to the
assigned Port ( you can know
which port from JISOW
sheet ).

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 6

LTE BBU connection


For MW and DF use SFP0 port , For GPON use FE0/GE0 Port

or DF

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 7

LTE 4G Integration
Main Job on site:

Use WEBLMT to login the eNodeB

Add the OM link and check the link status

Steps Of Job:

Use WEBLMT to login the eNodeB

Use the Ethernet cable to connect to ETH port of LMPT board.

Configure the IP 192.168.0.2 on laptop.

Use IE Browser and visit the website:

http://192.168.0.49/

Username admin

Password admin123

You must have JISOW sheet for IPs and VLAN

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 8

1. SET DHCPSW: SWITCH=DISABLE;

2. SET ETHPORT to modify as the picture below:

GPON : Port Attribute =


Copper
MW : Port Attribute =
Fiber

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 9

3. DSP ETHPORT: SN=7, SBT=BASE_BOARD;

To check port

status
DSP ETHPORT Result
-----------------Cabinet No. = 0
Subrack No. = 0
Slot No. = 7
Subboard Type = Base Board
Port No. = 0
Port Attribute = Copper
Port Status = Up
Physical Layer Status = Up
Maximum Transmission Unit(byte) = 1500
ARP Proxy = Enable
Flow Control = Open
MAC Address = 707B-E8C5-8B9A
Loopback Status = No Loop
In Loopback Mode or Not = No
Ethernet OAM 3AH Flag = Disable
Number of RX Packets(packet) = 444334
Number of RX Bytes(byte) = 79380405
Number of RX CRC Error Packets(packet) = 4
RX Traffic(byte/s) = 257
Number of TX Packets(packet) = 215850
Number of TX Bytes(byte) = 40290597
TX Traffic(byte/s) = 146
Local Configuration Negotiation Mode = Automatic Negotiation
Local Actual Negotiation Mode = Automatic Negotiation
Local Speed = 1000M
Local Duplex = Full Duplex
Peer Actual Negotiation Mode = Unknown
Peer Speed = 1000M
Peer Duplex = Unknown
Number of IPs = 2
IP Address List = 10.226.5.193 255.255.255.252
= 10.140.10.193 255.255.255.252
(Number of results = 1)

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 10

4. ADD DEVIP:;
As picture below:

0
O&M Host IP in JISOW

From JISOW

5. ADD VLANMAP:;

O&M DGW in JISOW

From JISOW
VLAN ID (OaM) in JISOW

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 11

6. ADD OMCH:;

O&M Host IP in JISOW


From JISOW

O&M DGW in JISOW

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 12

7. Ping:;
Tow destination:

PING from Local IP to GW IP

PING from Local IP to destination IP


(172.20.110.127)

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 13

Ping Result must be as follow:

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 14

8. Copy the Script Below To Batch section and press


GO and wait till finish.

Script.txt

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 15

9. ADD GPS: SN=7, CABLETYPE=COAXIAL,


CABLE_LEN=45, PRI=1;

10. SET CLKSYNCMODE: CLKSYNCMODE=TIME;

Select Time

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 16

11. DSP GPS: GN=0;


* Make sure the GPS Card State is Normal; And the GPS
Satellites Traced is larger than 8.

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 17

12. STR VSWRTEST:;


Be sure all VSWR values below 140

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 18

At Last when every things Ok Call integration Team


to make complete integration remotely after
confirm to you status is ok you can leave site.

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 19

Some Cases

Ethernet Port wrong configured.

Only can ping to GW but you cannot ping to Peer IP


(M2000).

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 20

Thanks

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 21

You might also like