Scribd
Upload
246 views1 page

Data Sheet Rodurflex Composite Line Post

The document describes composite line posts for overhead transmission and distribution lines that offer several advantages over traditional wooden or steel posts. The modular posts are made of high strength epoxy fiberglass reinforced polymer rods and silicone rubber housing. They have been in use for over 40 years on transmission lines between 1-550kV worldwide. The posts are lightweight, corrosion resistant, earthquake resistant, and able to withstand high dynamic and impact loads. They come in various diameters and lengths to accommodate different voltage classes and pollution levels.

Uploaded by

burvanov
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
246 views1 page

Data Sheet Rodurflex Composite Line Post

The document describes composite line posts for overhead transmission and distribution lines that offer several advantages over traditional wooden or steel posts. The modular posts are made of high strength epoxy fiberglass reinforced polymer rods and silicone rubber housing. They have been in use for over 40 years on transmission lines between 1-550kV worldwide. The posts are lightweight, corrosion resistant, earthquake resistant, and able to withstand high dynamic and impact loads. They come in various diameters and lengths to accommodate different voltage classes and pollution levels.

Uploaded by

burvanov
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

COMPOSITE LINE-POSTS

HTV Silicone Rubber, Generation III


Modular System
High Strength Solid Epoxy FRP Rod
VOLTAGE CLASS: 1 550 kV (>550kV in parallel unit arrangements)
PRODUCT STANDARDS: IEC 61952, ANSI C29.17, ANSI C29.18
EXPERIENCE: 40 years

MAIN ADVANTAGES:
Enables Compact OHTL Design
Braced Applications offer Extra High Strength
Superior Pollution Performance (Hydrophobicity Transfer Mechanism)
Earthquake Resistant
Vandalism Proof
Fail-Safe Arrangements (Bendable Bases)
Able to withstand Extreme Dynamic and Impact Loads
Light Weight: Easy Transport, Handling, Installation
Flexible in Design (Modular System)
Technology proven since more than 40 years
REFERENCES:
69-230 kV USA, various utilities
420 kV ESKOM Compact Line Palmiet-Stikkland (braced twin post design, crossarm)
123 kV SEC, Saudi Arabia
145-245 kV Iberdrola, Spain
123 kV CEGEDEL, Luxembourg
123 kV PSE, Poland
24-36 kV ENDESA, Iberdrola, FESCA, Spain
15 kV German Railways and distribution lines of German utilities

DESIGNS:
Core
[mm]
[inch]

Pollution Classes
[SCD, IEC 60815]

36.8
45.0
63.5
76.2
88.9
101.6

12-31 mm/kV
12-31 mm/kV
12-31 mm/kV
12-31 mm/kV
12-31 mm/kV
12-31 mm/kV

*
**
***

1.45
1.75
2.5
3.0
3.5
4.0

Maximum Cantilever Moment**



[kN m]

10
15
20
30
40
50

Um***
[kV]

36
72.5
170
245
362
550

higher specific creepage distance available, e.g. 40 mm/kV


for SCL (Specified Cantilever Load)
typical max. system voltage for single unit arrangement

END FITTINGS:
Anchor base for fixed and bendable bas plates
Trunnion (Horizontal Clamptop)
2-Hole Blade
Flanges (IEC and ANSI)
Special Fittings (Clevis, Tongue etc.)
Tailormade (Customer) end fittings

LAPP INSULATORS GmbH Bahnhofstrae 5 D-95632 Wunsiedel/Germany Fon: +49 (0) 9232 / 500 [email protected] www lappinsulators.de

You might also like