Scribd
Upload
260 views3 pages

Tutorial 2 - Chapter 3

This document summarizes 5 problems from a tutorial on statics and dynamics. Problem 1 asks to determine the forces in bridals BC and BD when a ship is being towed forward at constant velocity by a tugboat exerting a 50 kN force. Problem 2 asks to determine the tensions in wires CA and CB needed to balance a 10-kg cylinder at an angle of 40 degrees. Problem 3 asks to determine the horizontal force F needed to displace a pulley attached to two springs by 0.75 m. Problem 4 asks to determine the magnitudes of forces F1, F2, and F3 for equilibrium of a particle. Problem 5 asks to determine the forces in cables supporting a 17.5 kN platform when it

Uploaded by

Shaun Kerouac
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
260 views3 pages

Tutorial 2 - Chapter 3

This document summarizes 5 problems from a tutorial on statics and dynamics. Problem 1 asks to determine the forces in bridals BC and BD when a ship is being towed forward at constant velocity by a tugboat exerting a 50 kN force. Problem 2 asks to determine the tensions in wires CA and CB needed to balance a 10-kg cylinder at an angle of 40 degrees. Problem 3 asks to determine the horizontal force F needed to displace a pulley attached to two springs by 0.75 m. Problem 4 asks to determine the magnitudes of forces F1, F2, and F3 for equilibrium of a particle. Problem 5 asks to determine the forces in cables supporting a 17.5 kN platform when it

Uploaded by

Shaun Kerouac
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

PDB 1013 Statics and Dynamics: Tutorial 2 (Chapter 3)

1. The towing pendant AB is subjected to the force of 50 kN exerted by a


tugboat. Determine the force in each of the bridals, BC and BD, if the
ship is moving forward with constant velocity.

2. Determine the tension developed in wires CA and CB required for


equilibrium of the 10-kg cylinder. Take =40 .

Internal

3. The springs AB and BC each have a stiffness of 600 N/m and


unscratched length of 1.5 m. Determine the horizontal force F applied
to the cord which is attached to the small pulley B so that the
displacement of the pulley from the wall is d = 0.75 m.

4. Determine the magnitude of F1 , F2 and


particle.

Internal

F3 for equilibrium of the

5. Determine the force in each cable needed to support the 17.5-kN


platform. Set d = 0.6 m.

Internal

You might also like