Scribd
Upload
53 views3 pages

7.4 Calculation Sheet of Design of Isolated Footing Located Under Column (A)

The document provides calculations to design an isolated square footing located under a column. It determines: 1) The required area of the footing based on the working load and allowable soil bearing capacity, which is 6.858 sqm. 2) The dimensions of a rectangular footing that meets the required area, which is 2.5m x 3.0m or 7.5 sqm. 3) The depth of the footing is selected as 600mm, and the calculated self-weight of 108kN exceeds the minimum requirement. It then checks that the provided footing area and maximum soil pressure are within allowable limits.

Uploaded by

Khalid Banafa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
53 views3 pages

7.4 Calculation Sheet of Design of Isolated Footing Located Under Column (A)

The document provides calculations to design an isolated square footing located under a column. It determines: 1) The required area of the footing based on the working load and allowable soil bearing capacity, which is 6.858 sqm. 2) The dimensions of a rectangular footing that meets the required area, which is 2.5m x 3.0m or 7.5 sqm. 3) The depth of the footing is selected as 600mm, and the calculated self-weight of 108kN exceeds the minimum requirement. It then checks that the provided footing area and maximum soil pressure are within allowable limits.

Uploaded by

Khalid Banafa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

7.

4 Calculation sheet of Design of isolated footing


located under column (A)
Loading:
N (kN)

M xx

M yy

(KN.m)
(KN.m)
Ultimate
1820
21
-4
Load
Working
1270
14
-2
Load
Note: Column dimension 600 mm*200 mm

Area of footing:
Determination area of footing:
A=

Nw +self weight of footing


Pb

Where:

Nw

: Working load which transferred from building.

Assume self-weight of footing = 8% of


:. Area required including weight of footing:
A=

N w 0.08 12701.08
=
=6.858 m2
Pb
200

Rectangular Footing (2.53.0) = 7.5

Nw

Determination depth of footing:


Assume h=600 mm

Actual weight of footing = 2.5*3.0*0.6*24 = 108 KN


Actual weight of footing=108 KN > 8 of N w =101.7 KN

16
d max =hcover =60050 =542mm
2
2
d min =d max=54216=526 mm
3

I xx =

LB 3.02.5
=
=3.91m4
12
12

I yy =

B L3 2.53.03
=
=5.625 m4
12
12

Check for area:


area=

( Working Load + self weight )


( soil bearingcapacity )

1270.73+108
=6.89m2 <7.50 m2
200

Check for maximum soil pressure:


:. Total working Load

( N tw )

= (108 +1270.73) = 1378.73 kN.

Working soil stress below base:


P=

N tw (M xx working ) y ( M yy working ) x
+
+
A
I xx
I yy

P=

1378.73 14.63 ( 2.5/2 ) 2.84 ( 3.0/2 )


+
+
7.5
3.91
5.625

189.3 kN /m <200 kN /m

You might also like